sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file

[safe/jmp/linux-2.6] / Documentation / leds-class.txt

diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
index 18860ad..8fd5ca2 100644 (file)
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds-class.txt
@@ -1,3 +1,4 @@
+
 LED handling under Linux
 ========================
 
@@ -5,10 +6,10 @@ If you're reading this and thinking about keyboard leds, these are
 handled by the input subsystem and the led class is *not* needed.
 
 In its simplest form, the LED class just allows control of LEDs from
-userspace. LEDs appear in /sys/class/leds/. The brightness file will
-set the brightness of the LED (taking a value 0-255). Most LEDs don't
-have hardware brightness support so will just be turned on for non-zero
-brightness settings.
+userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
+LED is defined in max_brightness file. The brightness file will set the brightness
+of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware
+brightness support so will just be turned on for non-zero brightness settings.
 
 The class also introduces the optional concept of an LED trigger. A trigger
 is a kernel based source of led events. Triggers can either be simple or
@@ -59,7 +60,7 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemeted, triggers can
+blink_set() function (see <linux/leds.h>). If implemented, triggers can
 attempt to use it before falling back to software timers. The blink_set()
 function should return 0 if the blink setting is supported, or -EINVAL
 otherwise, which means that LED blinking will be handled by software.