---------------------------
+What: PRISM54
+When: 2.6.34
+
+Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+ prism54 wireless driver. After Intersil stopped selling these
+ devices in preference for the newer more flexible SoftMAC devices
+ a SoftMAC device driver was required and prism54 did not support
+ them. The p54pci driver now exists and has been present in the kernel for
+ a while. This driver supports both SoftMAC devices and FullMAC devices.
+ The main difference between these devices was the amount of memory which
+ could be used for the firmware. The SoftMAC devices support a smaller
+ amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+ devices's memory. p54pci supports not only PCI / Cardbus but also USB
+ and SPI. Since p54pci supports all devices prism54 supports
+ you will have a conflict. I'm not quite sure how distributions are
+ handling this conflict right now. prism54 was kept around due to
+ claims users may experience issues when using the SoftMAC driver.
+ Time has passed users have not reported issues. If you use prism54
+ and for whatever reason you cannot use p54pci please let us know!
+ E-mail us at: linux-wireless@vger.kernel.org
+
+ For more information see the p54 wiki page:
+
+ http://wireless.kernel.org/en/users/Drivers/p54
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
+What: IRQF_SAMPLE_RANDOM
+Check: IRQF_SAMPLE_RANDOM
+When: July 2009
+
+Why: Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
+ sources in the kernel's current entropy model. To resolve this, every
+ input point to the kernel's entropy pool needs to better document the
+ type of entropy source it actually is. This will be replaced with
+ additional add_*_randomness functions in drivers/char/random.c
+
+Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
+
+---------------------------
+
What: The ieee80211_regdom module parameter
When: March 2010 / desktop catchup
---------------------------
-What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When: December 2008
-Files: include/linux/video_decoder.h include/linux/videodev.h
-Check: include/linux/video_decoder.h include/linux/videodev.h
+What: Video4Linux API 1 ioctls and from Video devices.
+When: July 2009
+Files: include/linux/videodev.h
+Check: include/linux/videodev.h
Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
---------------------------
-What: libata spindown skipping and warning
-When: Dec 2008
-Why: Some halt(8) implementations synchronize caches for and spin
- down libata disks because libata didn't use to spin down disk on
- system halt (only synchronized caches).
- Spin down on system halt is now implemented. sysfs node
- /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
- spin down support is available.
- Because issuing spin down command to an already spun down disk
- makes some disks spin up just to spin down again, libata tracks
- device spindown status to skip the extra spindown command and
- warn about it.
- This is to give userspace tools the time to get updated and will
- be removed after userspace is reasonably updated.
-Who: Tejun Heo <htejun@gmail.com>
-
----------------------------
-
What: i386/x86_64 bzImage symlinks
When: April 2010
---------------------------
What (Why):
- - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
- (superseded by xt_TOS/xt_tos target & match)
-
- - "forwarding" header files like ipt_mac.h in
- include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
-
- - xt_CONNMARK match revision 0
- (superseded by xt_CONNMARK match revision 1)
-
- - xt_MARK target revisions 0 and 1
- (superseded by xt_MARK match revision 2)
-
- - xt_connmark match revision 0
- (superseded by xt_connmark match revision 1)
-
- - xt_conntrack match revision 0
- (superseded by xt_conntrack match revision 1)
-
- - xt_iprange match revision 0,
- include/linux/netfilter_ipv4/ipt_iprange.h
- (superseded by xt_iprange match revision 1)
-
- - xt_mark match revision 0
- (superseded by xt_mark match revision 1)
-
- xt_recent: the old ipt_recent proc dir
(superseded by /proc/net/xt_recent)
---------------------------
+What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib
+When: February 2010
+Why: All callers should use explicit gpio_request()/gpio_free().
+ The autorequest mechanism in gpiolib was provided mostly as a
+ migration aid for legacy GPIO interfaces (for SOC based GPIOs).
+ Those users have now largely migrated. Platforms implementing
+ the GPIO interfaces without using gpiolib will see no changes.
+Who: David Brownell <dbrownell@users.sourceforge.net>
+---------------------------
+
What: b43 support for firmware revision < 410
When: The schedule was July 2008, but it was decided that we are going to keep the
code as long as there are no major maintanance headaches.
---------------------------
+What: Ability for non root users to shm_get hugetlb pages based on mlock
+ resource limits
+When: 2.6.31
+Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
+ have CAP_IPC_LOCK to be able to allocate shm segments backed by
+ huge pages. The mlock based rlimit check to allow shm hugetlb is
+ inconsistent with mmap based allocations. Hence it is being
+ deprecated.
+Who: Ravikiran Thirumalai <kiran@scalex86.org>
+
+---------------------------
+
What: CONFIG_THERMAL_HWMON
When: January 2009
Why: This option was introduced just to allow older lm-sensors userspace
---------------------------
-What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
-When: 2.6.30
-Check: i2c_attach_client i2c_detach_client
-Why: Deprecated by the new (standard) device driver binding model. Use
- i2c_driver->probe() and ->remove() instead.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: fscher and fscpos drivers
-When: June 2009
-Why: Deprecated by the new fschmd driver.
-Who: Hans de Goede <hdegoede@redhat.com>
- Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: sysfs ui for changing p4-clockmod parameters
When: September 2009
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
-----------------------------
-What: obsolete generic irq defines and typedefs
-When: 2.6.30
-Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
- have been kept around for migration reasons. After more than two years
- it's time to remove them finally
-Who: Thomas Gleixner <tglx@linutronix.de>
+What: fakephp and associated sysfs files in /sys/bus/pci/slots/
+When: 2011
+Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
+ represent a machine's physical PCI slots. The change in semantics
+ had userspace implications, as the hotplug core no longer allowed
+ drivers to create multiple sysfs files per physical slot (required
+ for multi-function devices, e.g.). fakephp was seen as a developer's
+ tool only, and its interface changed. Too late, we learned that
+ there were some users of the fakephp interface.
+
+ In 2.6.30, the original fakephp interface was restored. At the same
+ time, the PCI core gained the ability that fakephp provided, namely
+ function-level hot-remove and hot-add.
+
+ Since the PCI core now provides the same functionality, exposed in:
+
+ /sys/bus/pci/rescan
+ /sys/bus/pci/devices/.../remove
+ /sys/bus/pci/devices/.../rescan
+
+ there is no functional reason to maintain fakephp as well.
+
+ We will keep the existing module so that 'modprobe fakephp' will
+ present the old /sys/bus/pci/slots/... interface for compatibility,
+ but users are urged to migrate their applications to the API above.
+
+ After a reasonable transition period, we will remove the legacy
+ fakephp interface.
+Who: Alex Chiang <achiang@hp.com>
+
+---------------------------
+
+What: i2c-voodoo3 driver
+When: October 2009
+Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
+ driver but this caused driver conflicts.
+Who: Jean Delvare <khali@linux-fr.org>
+ Krzysztof Helt <krzysztof.h1@wp.pl>
+
+---------------------------
+
+What: CONFIG_RFKILL_INPUT
+When: 2.6.33
+Why: Should be implemented in userspace, policy daemon.
+Who: Johannes Berg <johannes@sipsolutions.net>
+
+---------------------------
+
+What: CONFIG_INOTIFY
+When: 2.6.33
+Why: last user (audit) will be converted to the newer more generic
+ and more easily maintained fsnotify subsystem
+Who: Eric Paris <eparis@redhat.com>
+
+----------------------------
+
+What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+ exported interface anymore.
+When: 2.6.33
+Why: cpu_policy_rwsem has a new cleaner definition making it local to
+ cpufreq core and contained inside cpufreq.c. Other dependent
+ drivers should not use it in order to safely avoid lockdep issues.
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What: sound-slot/service-* module aliases and related clutters in
+ sound/sound_core.c
+When: August 2010
+Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+ (14) and requests modules using custom sound-slot/service-*
+ module aliases. The only benefit of doing this is allowing
+ use of custom module aliases which might as well be considered
+ a bug at this point. This preemptive claiming prevents
+ alternative OSS implementations.
+
+ Till the feature is removed, the kernel will be requesting
+ both sound-slot/service-* and the standard char-major-* module
+ aliases and allow turning off the pre-claiming selectively via
+ CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+ kernel parameter.
+
+ After the transition phase is complete, both the custom module
+ aliases and switches to disable it will go away. This removal
+ will also allow making ALSA OSS emulation independent of
+ sound_core. The dependency will be broken then too.
+Who: Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What: Support for VMware's guest paravirtuliazation technique [VMI] will be
+ dropped.
+When: 2.6.37 or earlier.
+Why: With the recent innovations in CPU hardware acceleration technologies
+ from Intel and AMD, VMware ran a few experiments to compare these
+ techniques to guest paravirtualization technique on VMware's platform.
+ These hardware assisted virtualization techniques have outperformed the
+ performance benefits provided by VMI in most of the workloads. VMware
+ expects that these hardware features will be ubiquitous in a couple of
+ years, as a result, VMware has started a phased retirement of this
+ feature from the hypervisor. We will be removing this feature from the
+ Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+ technical reasons (read opportunity to remove major chunk of pvops)
+ arise.
+
+ Please note that VMI has always been an optimization and non-VMI kernels
+ still work fine on VMware's platform.
+ Latest versions of VMware's product which support VMI are,
+ Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+ releases for these products will continue supporting VMI.
+
+ For more details about VMI retirement take a look at this,
+ http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who: Alok N Kataria <akataria@vmware.com>
+
+----------------------------
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff