---------------------------
+What: PRISM54
+When: 2.6.34
+
+Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+ prism54 wireless driver. After Intersil stopped selling these
+ devices in preference for the newer more flexible SoftMAC devices
+ a SoftMAC device driver was required and prism54 did not support
+ them. The p54pci driver now exists and has been present in the kernel for
+ a while. This driver supports both SoftMAC devices and FullMAC devices.
+ The main difference between these devices was the amount of memory which
+ could be used for the firmware. The SoftMAC devices support a smaller
+ amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+ devices's memory. p54pci supports not only PCI / Cardbus but also USB
+ and SPI. Since p54pci supports all devices prism54 supports
+ you will have a conflict. I'm not quite sure how distributions are
+ handling this conflict right now. prism54 was kept around due to
+ claims users may experience issues when using the SoftMAC driver.
+ Time has passed users have not reported issues. If you use prism54
+ and for whatever reason you cannot use p54pci please let us know!
+ E-mail us at: linux-wireless@vger.kernel.org
+
+ For more information see the p54 wiki page:
+
+ http://wireless.kernel.org/en/users/Drivers/p54
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
+What: IRQF_SAMPLE_RANDOM
+Check: IRQF_SAMPLE_RANDOM
+When: July 2009
+
+Why: Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
+ sources in the kernel's current entropy model. To resolve this, every
+ input point to the kernel's entropy pool needs to better document the
+ type of entropy source it actually is. This will be replaced with
+ additional add_*_randomness functions in drivers/char/random.c
+
+Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
+
+---------------------------
+
What: The ieee80211_regdom module parameter
When: March 2010 / desktop catchup
---------------------------
-What: libata spindown skipping and warning
-When: Dec 2008
-Why: Some halt(8) implementations synchronize caches for and spin
- down libata disks because libata didn't use to spin down disk on
- system halt (only synchronized caches).
- Spin down on system halt is now implemented. sysfs node
- /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
- spin down support is available.
- Because issuing spin down command to an already spun down disk
- makes some disks spin up just to spin down again, libata tracks
- device spindown status to skip the extra spindown command and
- warn about it.
- This is to give userspace tools the time to get updated and will
- be removed after userspace is reasonably updated.
-Who: Tejun Heo <htejun@gmail.com>
-
----------------------------
-
What: i386/x86_64 bzImage symlinks
When: April 2010
---------------------------
What (Why):
- - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
- (superseded by xt_TOS/xt_tos target & match)
-
- - "forwarding" header files like ipt_mac.h in
- include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
-
- - xt_CONNMARK match revision 0
- (superseded by xt_CONNMARK match revision 1)
-
- - xt_MARK target revisions 0 and 1
- (superseded by xt_MARK match revision 2)
-
- - xt_connmark match revision 0
- (superseded by xt_connmark match revision 1)
-
- - xt_conntrack match revision 0
- (superseded by xt_conntrack match revision 1)
-
- - xt_iprange match revision 0,
- include/linux/netfilter_ipv4/ipt_iprange.h
- (superseded by xt_iprange match revision 1)
-
- - xt_mark match revision 0
- (superseded by xt_mark match revision 1)
-
- xt_recent: the old ipt_recent proc dir
(superseded by /proc/net/xt_recent)
---------------------------
+What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib
+When: February 2010
+Why: All callers should use explicit gpio_request()/gpio_free().
+ The autorequest mechanism in gpiolib was provided mostly as a
+ migration aid for legacy GPIO interfaces (for SOC based GPIOs).
+ Those users have now largely migrated. Platforms implementing
+ the GPIO interfaces without using gpiolib will see no changes.
+Who: David Brownell <dbrownell@users.sourceforge.net>
+---------------------------
+
What: b43 support for firmware revision < 410
When: The schedule was July 2008, but it was decided that we are going to keep the
code as long as there are no major maintanance headaches.
---------------------------
-What: remove HID compat support
-When: 2.6.29
-Why: needed only as a temporary solution until distros fix themselves up
-Who: Jiri Slaby <jirislaby@gmail.com>
-
----------------------------
-
What: print_fn_descriptor_symbol()
When: October 2009
Why: The %pF vsprintf format provides the same functionality in a
---------------------------
+What: Ability for non root users to shm_get hugetlb pages based on mlock
+ resource limits
+When: 2.6.31
+Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
+ have CAP_IPC_LOCK to be able to allocate shm segments backed by
+ huge pages. The mlock based rlimit check to allow shm hugetlb is
+ inconsistent with mmap based allocations. Hence it is being
+ deprecated.
+Who: Ravikiran Thirumalai <kiran@scalex86.org>
+
+---------------------------
+
What: CONFIG_THERMAL_HWMON
When: January 2009
Why: This option was introduced just to allow older lm-sensors userspace
---------------------------
-What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
-When: 2.6.30
-Check: i2c_attach_client i2c_detach_client
-Why: Deprecated by the new (standard) device driver binding model. Use
- i2c_driver->probe() and ->remove() instead.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: fscher and fscpos drivers
-When: June 2009
-Why: Deprecated by the new fschmd driver.
-Who: Hans de Goede <hdegoede@redhat.com>
- Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: sysfs ui for changing p4-clockmod parameters
When: September 2009
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
-----------------------------
-What: obsolete generic irq defines and typedefs
-When: 2.6.30
-Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
- have been kept around for migration reasons. After more than two years
- it's time to remove them finally
-Who: Thomas Gleixner <tglx@linutronix.de>
+What: fakephp and associated sysfs files in /sys/bus/pci/slots/
+When: 2011
+Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
+ represent a machine's physical PCI slots. The change in semantics
+ had userspace implications, as the hotplug core no longer allowed
+ drivers to create multiple sysfs files per physical slot (required
+ for multi-function devices, e.g.). fakephp was seen as a developer's
+ tool only, and its interface changed. Too late, we learned that
+ there were some users of the fakephp interface.
+
+ In 2.6.30, the original fakephp interface was restored. At the same
+ time, the PCI core gained the ability that fakephp provided, namely
+ function-level hot-remove and hot-add.
+
+ Since the PCI core now provides the same functionality, exposed in:
+
+ /sys/bus/pci/rescan
+ /sys/bus/pci/devices/.../remove
+ /sys/bus/pci/devices/.../rescan
+
+ there is no functional reason to maintain fakephp as well.
+
+ We will keep the existing module so that 'modprobe fakephp' will
+ present the old /sys/bus/pci/slots/... interface for compatibility,
+ but users are urged to migrate their applications to the API above.
+
+ After a reasonable transition period, we will remove the legacy
+ fakephp interface.
+Who: Alex Chiang <achiang@hp.com>
+
+---------------------------
+
+What: i2c-voodoo3 driver
+When: October 2009
+Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
+ driver but this caused driver conflicts.
+Who: Jean Delvare <khali@linux-fr.org>
+ Krzysztof Helt <krzysztof.h1@wp.pl>
+
+---------------------------
+
+What: CONFIG_RFKILL_INPUT
+When: 2.6.33
+Why: Should be implemented in userspace, policy daemon.
+Who: Johannes Berg <johannes@sipsolutions.net>
+
+---------------------------
+
+What: CONFIG_INOTIFY
+When: 2.6.33
+Why: last user (audit) will be converted to the newer more generic
+ and more easily maintained fsnotify subsystem
+Who: Eric Paris <eparis@redhat.com>
+
+----------------------------
+
+What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+ exported interface anymore.
+When: 2.6.33
+Why: cpu_policy_rwsem has a new cleaner definition making it local to
+ cpufreq core and contained inside cpufreq.c. Other dependent
+ drivers should not use it in order to safely avoid lockdep issues.
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What: sound-slot/service-* module aliases and related clutters in
+ sound/sound_core.c
+When: August 2010
+Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+ (14) and requests modules using custom sound-slot/service-*
+ module aliases. The only benefit of doing this is allowing
+ use of custom module aliases which might as well be considered
+ a bug at this point. This preemptive claiming prevents
+ alternative OSS implementations.
+
+ Till the feature is removed, the kernel will be requesting
+ both sound-slot/service-* and the standard char-major-* module
+ aliases and allow turning off the pre-claiming selectively via
+ CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+ kernel parameter.
+
+ After the transition phase is complete, both the custom module
+ aliases and switches to disable it will go away. This removal
+ will also allow making ALSA OSS emulation independent of
+ sound_core. The dependency will be broken then too.
+Who: Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What: Support for VMware's guest paravirtuliazation technique [VMI] will be
+ dropped.
+When: 2.6.37 or earlier.
+Why: With the recent innovations in CPU hardware acceleration technologies
+ from Intel and AMD, VMware ran a few experiments to compare these
+ techniques to guest paravirtualization technique on VMware's platform.
+ These hardware assisted virtualization techniques have outperformed the
+ performance benefits provided by VMI in most of the workloads. VMware
+ expects that these hardware features will be ubiquitous in a couple of
+ years, as a result, VMware has started a phased retirement of this
+ feature from the hypervisor. We will be removing this feature from the
+ Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+ technical reasons (read opportunity to remove major chunk of pvops)
+ arise.
+
+ Please note that VMI has always been an optimization and non-VMI kernels
+ still work fine on VMware's platform.
+ Latest versions of VMware's product which support VMI are,
+ Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+ releases for these products will continue supporting VMI.
+
+ For more details about VMI retirement take a look at this,
+ http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who: Alok N Kataria <akataria@vmware.com>
+
+----------------------------
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff