---------------------------
+What: PRISM54
+When: 2.6.34
+
+Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+ prism54 wireless driver. After Intersil stopped selling these
+ devices in preference for the newer more flexible SoftMAC devices
+ a SoftMAC device driver was required and prism54 did not support
+ them. The p54pci driver now exists and has been present in the kernel for
+ a while. This driver supports both SoftMAC devices and FullMAC devices.
+ The main difference between these devices was the amount of memory which
+ could be used for the firmware. The SoftMAC devices support a smaller
+ amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+ devices's memory. p54pci supports not only PCI / Cardbus but also USB
+ and SPI. Since p54pci supports all devices prism54 supports
+ you will have a conflict. I'm not quite sure how distributions are
+ handling this conflict right now. prism54 was kept around due to
+ claims users may experience issues when using the SoftMAC driver.
+ Time has passed users have not reported issues. If you use prism54
+ and for whatever reason you cannot use p54pci please let us know!
+ E-mail us at: linux-wireless@vger.kernel.org
+
+ For more information see the p54 wiki page:
+
+ http://wireless.kernel.org/en/users/Drivers/p54
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
+What: IRQF_SAMPLE_RANDOM
+Check: IRQF_SAMPLE_RANDOM
+When: July 2009
+
+Why: Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
+ sources in the kernel's current entropy model. To resolve this, every
+ input point to the kernel's entropy pool needs to better document the
+ type of entropy source it actually is. This will be replaced with
+ additional add_*_randomness functions in drivers/char/random.c
+
+Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
+
+---------------------------
+
+What: The ieee80211_regdom module parameter
+When: March 2010 / desktop catchup
+
+Why: This was inherited by the CONFIG_WIRELESS_OLD_REGULATORY code,
+ and currently serves as an option for users to define an
+ ISO / IEC 3166 alpha2 code for the country they are currently
+ present in. Although there are userspace API replacements for this
+ through nl80211 distributions haven't yet caught up with implementing
+ decent alternatives through standard GUIs. Although available as an
+ option through iw or wpa_supplicant its just a matter of time before
+ distributions pick up good GUI options for this. The ideal solution
+ would actually consist of intelligent designs which would do this for
+ the user automatically even when travelling through different countries.
+ Until then we leave this module parameter as a compromise.
+
+ When userspace improves with reasonable widely-available alternatives for
+ this we will no longer need this module parameter. This entry hopes that
+ by the super-futuristically looking date of "March 2010" we will have
+ such replacements widely available.
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
+What: CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
+When: March 2010 / desktop catchup
+
+Why: The old regulatory infrastructure has been replaced with a new one
+ which does not require statically defined regulatory domains. We do
+ not want to keep static regulatory domains in the kernel due to the
+ the dynamic nature of regulatory law and localization. We kept around
+ the old static definitions for the regulatory domains of:
+
+ * US
+ * JP
+ * EU
+
+ and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+ set. We will remove this option once the standard Linux desktop catches
+ up with the new userspace APIs we have implemented.
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
What: dev->power.power_state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
---------------------------
-What: old NCR53C9x driver
-When: October 2007
-Why: Replaced by the much better esp_scsi driver. Actual low-level
- driver can be ported over almost trivially.
-Who: David Miller <davem@davemloft.net>
- Christoph Hellwig <hch@lst.de>
-
----------------------------
-
-What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When: December 2008
-Files: include/linux/video_decoder.h include/linux/videodev.h
-Check: include/linux/video_decoder.h include/linux/videodev.h
+What: Video4Linux API 1 ioctls and from Video devices.
+When: July 2009
+Files: include/linux/videodev.h
+Check: include/linux/videodev.h
Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
---------------------------
-What: eepro100 network driver
-When: January 2007
-Why: replaced by the e100 driver
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
-What: vm_ops.nopage
-When: Soon, provided in-kernel callers have been converted
-Why: This interface is replaced by vm_ops.fault, but it has been around
- forever, is used by a lot of drivers, and doesn't cost much to
- maintain.
-Who: Nick Piggin <npiggin@suse.de>
-
----------------------------
-
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
---------------------------
-What: libata spindown skipping and warning
-When: Dec 2008
-Why: Some halt(8) implementations synchronize caches for and spin
- down libata disks because libata didn't use to spin down disk on
- system halt (only synchronized caches).
- Spin down on system halt is now implemented. sysfs node
- /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
- spin down support is available.
- Because issuing spin down command to an already spun down disk
- makes some disks spin up just to spin down again, libata tracks
- device spindown status to skip the extra spindown command and
- warn about it.
- This is to give userspace tools the time to get updated and will
- be removed after userspace is reasonably updated.
-Who: Tejun Heo <htejun@gmail.com>
+What: i386/x86_64 bzImage symlinks
+When: April 2010
+
+Why: The i386/x86_64 merge provides a symlink to the old bzImage
+ location so not yet updated user space tools, e.g. package
+ scripts, do not break.
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64
- platforms. Currently there are efforts underway to port the remaining
- arch/ppc platforms to the merged tree. New submissions to the arch/ppc
- tree have been frozen with the 2.6.22 kernel release and that tree will
- remain in bug-fix only mode until its scheduled removal. Platforms
- that are not ported by June 2008 will be removed due to the lack of an
- interested maintainer.
-Who: linuxppc-dev@ozlabs.org
+What (Why):
+ - xt_recent: the old ipt_recent proc dir
+ (superseded by /proc/net/xt_recent)
+
+When: January 2009 or Linux 2.7.0, whichever comes first
+Why: Superseded by newer revisions or modules
+Who: Jan Engelhardt <jengelh@computergmbh.de>
---------------------------
-What: sk98lin network driver
-When: Feburary 2008
-Why: In kernel tree version of driver is unmaintained. Sk98lin driver
- replaced by the skge driver.
-Who: Stephen Hemminger <shemminger@linux-foundation.org>
+What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib
+When: February 2010
+Why: All callers should use explicit gpio_request()/gpio_free().
+ The autorequest mechanism in gpiolib was provided mostly as a
+ migration aid for legacy GPIO interfaces (for SOC based GPIOs).
+ Those users have now largely migrated. Platforms implementing
+ the GPIO interfaces without using gpiolib will see no changes.
+Who: David Brownell <dbrownell@users.sourceforge.net>
+---------------------------
+
+What: b43 support for firmware revision < 410
+When: The schedule was July 2008, but it was decided that we are going to keep the
+ code as long as there are no major maintanance headaches.
+ So it _could_ be removed _any_ time now, if it conflicts with something new.
+Why: The support code for the old firmware hurts code readability/maintainability
+ and slightly hurts runtime performance. Bugfixes for the old firmware
+ are not provided by Broadcom anymore.
+Who: Michael Buesch <mb@bu3sch.de>
---------------------------
-What: i386/x86_64 bzImage symlinks
-When: April 2008
+What: usedac i386 kernel parameter
+When: 2.6.27
+Why: replaced by allowdac and no dac combination
+Who: Glauber Costa <gcosta@redhat.com>
-Why: The i386/x86_64 merge provides a symlink to the old bzImage
- location so not yet updated user space tools, e.g. package
- scripts, do not break.
-Who: Thomas Gleixner <tglx@linutronix.de>
+---------------------------
+
+What: print_fn_descriptor_symbol()
+When: October 2009
+Why: The %pF vsprintf format provides the same functionality in a
+ simpler way. print_fn_descriptor_symbol() is deprecated but
+ still present to give out-of-tree modules time to change.
+Who: Bjorn Helgaas <bjorn.helgaas@hp.com>
---------------------------
+What: /sys/o2cb symlink
+When: January 2010
+Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
+ exists as a symlink for backwards compatibility for old versions of
+ ocfs2-tools. 2 years should be sufficient time to phase in new versions
+ which know to look in /sys/fs/o2cb.
+Who: ocfs2-devel@oss.oracle.com
+
---------------------------
-What: i2c-i810, i2c-prosavage and i2c-savage4
-When: May 2008
-Why: These drivers are superseded by i810fb, intelfb and savagefb.
-Who: Jean Delvare <khali@linux-fr.org>
+What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
+ SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
+When: June 2009
+Why: A newer version of the options have been introduced in 2005 that
+ removes the limitions of the old API. The sctp library has been
+ converted to use these new options at the same time. Any user
+ space app that directly uses the old options should convert to using
+ the new options.
+Who: Vlad Yasevich <vladislav.yasevich@hp.com>
---------------------------
-What: rc80211-simple rate control algorithm for mac80211
-When: 2.6.26
-Files: net/mac80211/rc80211-simple.c
-Why: This algorithm was provided for reference but always exhibited bad
- responsiveness and performance and has some serious flaws. It has been
- replaced by rc80211-pid.
-Who: Stefano Brivio <stefano.brivio@polimi.it>
+What: Ability for non root users to shm_get hugetlb pages based on mlock
+ resource limits
+When: 2.6.31
+Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
+ have CAP_IPC_LOCK to be able to allocate shm segments backed by
+ huge pages. The mlock based rlimit check to allow shm hugetlb is
+ inconsistent with mmap based allocations. Hence it is being
+ deprecated.
+Who: Ravikiran Thirumalai <kiran@scalex86.org>
---------------------------
-What (Why):
- - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
- (superseded by xt_TOS/xt_tos target & match)
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
- - "forwarding" header files like ipt_mac.h in
- include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
+---------------------------
- - xt_CONNMARK match revision 0
- (superseded by xt_CONNMARK match revision 1)
+What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
+ (in net/core/net-sysfs.c)
+When: After the only user (hal) has seen a release with the patches
+ for enough time, probably some time in 2010.
+Why: Over 1K .text/.data size reduction, data is available in other
+ ways (ioctls)
+Who: Johannes Berg <johannes@sipsolutions.net>
- - xt_MARK target revisions 0 and 1
- (superseded by xt_MARK match revision 2)
+---------------------------
- - xt_connmark match revision 0
- (superseded by xt_connmark match revision 1)
+What: CONFIG_NF_CT_ACCT
+When: 2.6.29
+Why: Accounting can now be enabled/disabled without kernel recompilation.
+ Currently used only to set a default value for a feature that is also
+ controlled by a kernel/module/sysfs/sysctl parameter.
+Who: Krzysztof Piotr Oledzki <ole@ans.pl>
- - xt_conntrack match revision 0
- (superseded by xt_conntrack match revision 1)
+---------------------------
- - xt_iprange match revision 0,
- include/linux/netfilter_ipv4/ipt_iprange.h
- (superseded by xt_iprange match revision 1)
+What: sysfs ui for changing p4-clockmod parameters
+When: September 2009
+Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+ e088e4c9cdb618675874becb91b2fd581ee707e6.
+ Removal is subject to fixing any remaining bugs in ACPI which may
+ cause the thermal throttling not to happen at the right time.
+Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
- - xt_mark match revision 0
- (superseded by xt_mark match revision 1)
+-----------------------------
-When: January 2009 or Linux 2.7.0, whichever comes first
-Why: Superseded by newer revisions or modules
-Who: Jan Engelhardt <jengelh@computergmbh.de>
+What: __do_IRQ all in one fits nothing interrupt handler
+When: 2.6.32
+Why: __do_IRQ was kept for easy migration to the type flow handlers.
+ More than two years of migration time is enough.
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+-----------------------------
+
+What: fakephp and associated sysfs files in /sys/bus/pci/slots/
+When: 2011
+Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
+ represent a machine's physical PCI slots. The change in semantics
+ had userspace implications, as the hotplug core no longer allowed
+ drivers to create multiple sysfs files per physical slot (required
+ for multi-function devices, e.g.). fakephp was seen as a developer's
+ tool only, and its interface changed. Too late, we learned that
+ there were some users of the fakephp interface.
+
+ In 2.6.30, the original fakephp interface was restored. At the same
+ time, the PCI core gained the ability that fakephp provided, namely
+ function-level hot-remove and hot-add.
+
+ Since the PCI core now provides the same functionality, exposed in:
+
+ /sys/bus/pci/rescan
+ /sys/bus/pci/devices/.../remove
+ /sys/bus/pci/devices/.../rescan
+
+ there is no functional reason to maintain fakephp as well.
+
+ We will keep the existing module so that 'modprobe fakephp' will
+ present the old /sys/bus/pci/slots/... interface for compatibility,
+ but users are urged to migrate their applications to the API above.
+
+ After a reasonable transition period, we will remove the legacy
+ fakephp interface.
+Who: Alex Chiang <achiang@hp.com>
---------------------------
-What: b43 support for firmware revision < 410
-When: July 2008
-Why: The support code for the old firmware hurts code readability/maintainability
- and slightly hurts runtime performance. Bugfixes for the old firmware
- are not provided by Broadcom anymore.
-Who: Michael Buesch <mb@bu3sch.de>
+What: i2c-voodoo3 driver
+When: October 2009
+Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
+ driver but this caused driver conflicts.
+Who: Jean Delvare <khali@linux-fr.org>
+ Krzysztof Helt <krzysztof.h1@wp.pl>
+
+---------------------------
+
+What: CONFIG_RFKILL_INPUT
+When: 2.6.33
+Why: Should be implemented in userspace, policy daemon.
+Who: Johannes Berg <johannes@sipsolutions.net>
---------------------------
-What: Solaris/SunOS syscall and binary support on Sparc
-When: 2.6.26
-Why: Largely unmaintained and almost entirely unused. File system
- layering used to divert library and dynamic linker searches to
- /usr/gnemul is extremely buggy and unfixable. Making it work
- is largely pointless as without a lot of work only the most
- trivial of Solaris binaries can work with the emulation code.
-Who: David S. Miller <davem@davemloft.net>
+What: CONFIG_INOTIFY
+When: 2.6.33
+Why: last user (audit) will be converted to the newer more generic
+ and more easily maintained fsnotify subsystem
+Who: Eric Paris <eparis@redhat.com>
+
+----------------------------
+
+What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+ exported interface anymore.
+When: 2.6.33
+Why: cpu_policy_rwsem has a new cleaner definition making it local to
+ cpufreq core and contained inside cpufreq.c. Other dependent
+ drivers should not use it in order to safely avoid lockdep issues.
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What: sound-slot/service-* module aliases and related clutters in
+ sound/sound_core.c
+When: August 2010
+Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+ (14) and requests modules using custom sound-slot/service-*
+ module aliases. The only benefit of doing this is allowing
+ use of custom module aliases which might as well be considered
+ a bug at this point. This preemptive claiming prevents
+ alternative OSS implementations.
+
+ Till the feature is removed, the kernel will be requesting
+ both sound-slot/service-* and the standard char-major-* module
+ aliases and allow turning off the pre-claiming selectively via
+ CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+ kernel parameter.
+
+ After the transition phase is complete, both the custom module
+ aliases and switches to disable it will go away. This removal
+ will also allow making ALSA OSS emulation independent of
+ sound_core. The dependency will be broken then too.
+Who: Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What: Support for VMware's guest paravirtuliazation technique [VMI] will be
+ dropped.
+When: 2.6.37 or earlier.
+Why: With the recent innovations in CPU hardware acceleration technologies
+ from Intel and AMD, VMware ran a few experiments to compare these
+ techniques to guest paravirtualization technique on VMware's platform.
+ These hardware assisted virtualization techniques have outperformed the
+ performance benefits provided by VMI in most of the workloads. VMware
+ expects that these hardware features will be ubiquitous in a couple of
+ years, as a result, VMware has started a phased retirement of this
+ feature from the hypervisor. We will be removing this feature from the
+ Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+ technical reasons (read opportunity to remove major chunk of pvops)
+ arise.
+
+ Please note that VMI has always been an optimization and non-VMI kernels
+ still work fine on VMware's platform.
+ Latest versions of VMware's product which support VMI are,
+ Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+ releases for these products will continue supporting VMI.
+
+ For more details about VMI retirement take a look at this,
+ http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who: Alok N Kataria <akataria@vmware.com>
+
+----------------------------
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff