nfsd: nfsd should drop CAP_MKNOD for non-root
[safe/jmp/linux-2.6] / Documentation / feature-removal-schedule.txt
index ce9503c..20d3b94 100644 (file)
@@ -6,6 +6,24 @@ be removed from this file.
 
 ---------------------------
 
+What:  old static regulatory information and ieee80211_regdom module parameter
+When:  2.6.29
+Why:   The old regulatory infrastructure has been replaced with a new one
+       which does not require statically defined regulatory domains. We do
+       not want to keep static regulatory domains in the kernel due to the
+       the dynamic nature of regulatory law and localization. We kept around
+       the old static definitions for the regulatory domains of:
+               * US
+               * JP
+               * EU
+       and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+       set. We also kept around the ieee80211_regdom module parameter in case
+       some applications were relying on it. Changing regulatory domains
+       can now be done instead by using nl80211, as is done with iw.
+Who:   Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
 What:  dev->power.power_state
 When:  July 2007
 Why:   Broken design for runtime control over driver power states, confusing
@@ -19,15 +37,6 @@ Who: Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:  old NCR53C9x driver
-When:  October 2007
-Why:   Replaced by the much better esp_scsi driver.  Actual low-level
-       driver can be ported over almost trivially.
-Who:   David Miller <davem@davemloft.net>
-       Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:  Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:  December 2008
 Files: include/linux/video_decoder.h include/linux/videodev.h
@@ -111,22 +120,6 @@ Who:       Christoph Hellwig <hch@lst.de>
 
 ---------------------------
 
-What:  CONFIG_FORCED_INLINING
-When:  June 2006
-Why:   Config option is there to see if gcc is good enough. (in january
-        2006). If it is, the behavior should just be the default. If it's not,
-       the option should just go away entirely.
-Who:    Arjan van de Ven
-
----------------------------
-
-What:   eepro100 network driver
-When:   January 2007
-Why:    replaced by the e100 driver
-Who:    Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
 What:  Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
        (temporary transition config option provided until then)
        The transition config option will also be removed at the same time.
@@ -137,15 +130,6 @@ Who:       Arjan van de Ven <arjan@linux.intel.com>
 
 ---------------------------
 
-What:  vm_ops.nopage
-When:  Soon, provided in-kernel callers have been converted
-Why:   This interface is replaced by vm_ops.fault, but it has been around
-       forever, is used by a lot of drivers, and doesn't cost much to
-       maintain.
-Who:   Nick Piggin <npiggin@suse.de>
-
----------------------------
-
 What:  PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
 When:  October 2008
 Why:   The stacking of class devices makes these values misleading and
@@ -199,29 +183,8 @@ Who:  Tejun Heo <htejun@gmail.com>
 
 ---------------------------
 
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why:  The arch/powerpc tree is the merged architecture for ppc32 and ppc64
-      platforms.  Currently there are efforts underway to port the remaining
-      arch/ppc platforms to the merged tree.  New submissions to the arch/ppc
-      tree have been frozen with the 2.6.22 kernel release and that tree will
-      remain in bug-fix only mode until its scheduled removal.  Platforms
-      that are not ported by June 2008 will be removed due to the lack of an
-      interested maintainer.
-Who:  linuxppc-dev@ozlabs.org
-
----------------------------
-
-What:   sk98lin network driver
-When:   Feburary 2008
-Why:    In kernel tree version of driver is unmaintained. Sk98lin driver
-       replaced by the skge driver. 
-Who:    Stephen Hemminger <shemminger@linux-foundation.org>
-
----------------------------
-
 What:  i386/x86_64 bzImage symlinks
-When:  April 2008
+When:  April 2010
 
 Why:   The i386/x86_64 merge provides a symlink to the old bzImage
        location so not yet updated user space tools, e.g. package
@@ -230,42 +193,6 @@ Who:       Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
 
----------------------------
-
-What:  i2c-i810, i2c-prosavage and i2c-savage4
-When:  May 2008
-Why:   These drivers are superseded by i810fb, intelfb and savagefb.
-Who:   Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What:  bcm43xx wireless network driver
-When:  2.6.26
-Files: drivers/net/wireless/bcm43xx
-Why:   This driver's functionality has been replaced by the
-       mac80211-based b43 and b43legacy drivers.
-Who:   John W. Linville <linville@tuxdriver.com>
-
----------------------------
-
-What:  ieee80211 softmac wireless networking component
-When:  2.6.26 (or after removal of bcm43xx and port of zd1211rw to mac80211)
-Files: net/ieee80211/softmac
-Why:   No in-kernel drivers will depend on it any longer.
-Who:   John W. Linville <linville@tuxdriver.com>
-
----------------------------
-
-What:  rc80211-simple rate control algorithm for mac80211
-When:  2.6.26
-Files: net/mac80211/rc80211-simple.c
-Why:   This algorithm was provided for reference but always exhibited bad
-       responsiveness and performance and has some serious flaws. It has been
-       replaced by rc80211-pid.
-Who:   Stefano Brivio <stefano.brivio@polimi.it>
-
----------------------------
-
 What (Why):
        - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
          (superseded by xt_TOS/xt_tos target & match)
@@ -292,6 +219,9 @@ What (Why):
        - xt_mark match revision 0
          (superseded by xt_mark match revision 1)
 
+       - xt_recent: the old ipt_recent proc dir
+         (superseded by /proc/net/xt_recent)
+
 When:  January 2009 or Linux 2.7.0, whichever comes first
 Why:   Superseded by newer revisions or modules
 Who:   Jan Engelhardt <jengelh@computergmbh.de>
@@ -304,3 +234,113 @@ Why:      The support code for the old firmware hurts code readability/maintainabilit
        and slightly hurts runtime performance. Bugfixes for the old firmware
        are not provided by Broadcom anymore.
 Who:   Michael Buesch <mb@bu3sch.de>
+
+---------------------------
+
+What:  usedac i386 kernel parameter
+When:  2.6.27
+Why:   replaced by allowdac and no dac combination
+Who:   Glauber Costa <gcosta@redhat.com>
+
+---------------------------
+
+What:  remove HID compat support
+When:  2.6.29
+Why:   needed only as a temporary solution until distros fix themselves up
+Who:   Jiri Slaby <jirislaby@gmail.com>
+
+---------------------------
+
+What: print_fn_descriptor_symbol()
+When: October 2009
+Why:  The %pF vsprintf format provides the same functionality in a
+      simpler way.  print_fn_descriptor_symbol() is deprecated but
+      still present to give out-of-tree modules time to change.
+Who:  Bjorn Helgaas <bjorn.helgaas@hp.com>
+
+---------------------------
+
+What:  /sys/o2cb symlink
+When:  January 2010
+Why:   /sys/fs/o2cb is the proper location for this information - /sys/o2cb
+       exists as a symlink for backwards compatibility for old versions of
+       ocfs2-tools. 2 years should be sufficient time to phase in new versions
+       which know to look in /sys/fs/o2cb.
+Who:   ocfs2-devel@oss.oracle.com
+
+---------------------------
+
+What:  SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
+       SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
+When:  June 2009
+Why:    A newer version of the options have been introduced in 2005 that
+       removes the limitions of the old API.  The sctp library has been
+        converted to use these new options at the same time.  Any user
+       space app that directly uses the old options should convert to using
+       the new options.
+Who:   Vlad Yasevich <vladislav.yasevich@hp.com>
+
+---------------------------
+
+What:  CONFIG_THERMAL_HWMON
+When:  January 2009
+Why:   This option was introduced just to allow older lm-sensors userspace
+       to keep working over the upgrade to 2.6.26. At the scheduled time of
+       removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who:   Rene Herman <rene.herman@gmail.com>
+
+---------------------------
+
+What:  Code that is now under CONFIG_WIRELESS_EXT_SYSFS
+       (in net/core/net-sysfs.c)
+When:  After the only user (hal) has seen a release with the patches
+       for enough time, probably some time in 2010.
+Why:   Over 1K .text/.data size reduction, data is available in other
+       ways (ioctls)
+Who:   Johannes Berg <johannes@sipsolutions.net>
+
+---------------------------
+
+What: CONFIG_NF_CT_ACCT
+When: 2.6.29
+Why:  Accounting can now be enabled/disabled without kernel recompilation.
+      Currently used only to set a default value for a feature that is also
+      controlled by a kernel/module/sysfs/sysctl parameter.
+Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
+
+---------------------------
+
+What:  i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
+When:  2.6.29 (ideally) or 2.6.30 (more likely)
+Why:   Deprecated by the new (standard) device driver binding model. Use
+       i2c_driver->probe() and ->remove() instead.
+Who:   Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What:  fscher and fscpos drivers
+When:  June 2009
+Why:   Deprecated by the new fschmd driver.
+Who:   Hans de Goede <hdegoede@redhat.com>
+       Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What:  SELinux "compat_net" functionality
+When:  2.6.30 at the earliest
+Why:   In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
+       network access control functionality of SELinux.  Secmark offers both
+       better performance and greater flexibility than the "compat_net"
+       mechanism.  Now that the major Linux distributions have moved to
+       Secmark, it is time to deprecate the older mechanism and start the
+       process of removing the old code.
+Who:   Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:  sysfs ui for changing p4-clockmod parameters
+When:  September 2009
+Why:   See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+       e088e4c9cdb618675874becb91b2fd581ee707e6.
+       Removal is subject to fixing any remaining bugs in ACPI which may
+       cause the thermal throttling not to happen at the right time.
+Who:   Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>