---------------------------
-What: MXSER
-When: December 2007
-Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
- and remove it.
-Who: Jiri Slaby <jirislaby@gmail.com>
-
----------------------------
-
-What: V4L2 VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP
-When: October 2007
-Why: Broken attempt to set MPEG compression parameters. These ioctls are
- not able to implement the wide variety of parameters that can be set
- by hardware MPEG encoders. A new MPEG control mechanism was created
- in kernel 2.6.18 that replaces these ioctls. See the V4L2 specification
- (section 1.9: Extended controls) for more information on this topic.
-Who: Hans Verkuil <hverkuil@xs4all.nl> and
- Mauro Carvalho Chehab <mchehab@infradead.org>
+What: old static regulatory information and ieee80211_regdom module parameter
+When: 2.6.29
+Why: The old regulatory infrastructure has been replaced with a new one
+ which does not require statically defined regulatory domains. We do
+ not want to keep static regulatory domains in the kernel due to the
+ the dynamic nature of regulatory law and localization. We kept around
+ the old static definitions for the regulatory domains of:
+ * US
+ * JP
+ * EU
+ and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+ set. We also kept around the ieee80211_regdom module parameter in case
+ some applications were relying on it. Changing regulatory domains
+ can now be done instead by using nl80211, as is done with iw.
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
---------------------------
---------------------------
-What: old NCR53C9x driver
-When: October 2007
-Why: Replaced by the much better esp_scsi driver. Actual low-level
- driver can be ported over almost trivially.
-Who: David Miller <davem@davemloft.net>
- Christoph Hellwig <hch@lst.de>
-
----------------------------
-
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When: December 2006
-Files: include/linux/video_decoder.h
-Check: include/linux/video_decoder.h
-Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
+When: December 2008
+Files: include/linux/video_decoder.h include/linux/videodev.h
+Check: include/linux/video_decoder.h include/linux/videodev.h
+Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
already available on the main drivers and should be used instead.
Decoder iocts are using internally to allow video drivers to
communicate with video decoders. This should also be improved to allow
V4L2 calls being translated into compatible internal ioctls.
-Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+ Compatibility ioctls will be provided, for a while, via
+ v4l1-compat module.
+Who: Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
---------------------------
+What: sys_sysctl
+When: September 2010
+Option: CONFIG_SYSCTL_SYSCALL
+Why: The same information is available in a more convenient from
+ /proc/sys, and none of the sysctl variables appear to be
+ important performance wise.
+
+ Binary sysctls are a long standing source of subtle kernel
+ bugs and security issues.
+
+ When I looked several months ago all I could find after
+ searching several distributions were 5 user space programs and
+ glibc (which falls back to /proc/sys) using this syscall.
+
+ The man page for sysctl(2) documents it as unusable for user
+ space programs.
+
+ sysctl(2) is not generally ABI compatible to a 32bit user
+ space application on a 64bit and a 32bit kernel.
+
+ For the last several months the policy has been no new binary
+ sysctls and no one has put forward an argument to use them.
+
+ Binary sysctls issues seem to keep happening appearing so
+ properly deprecating them (with a warning to user space) and a
+ 2 year grace warning period will mean eventually we can kill
+ them and end the pain.
+
+ In the mean time individual binary sysctls can be dealt with
+ in a piecewise fashion.
+
+Who: Eric Biederman <ebiederm@xmission.com>
+
+---------------------------
+
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
---------------------------
-What: CONFIG_FORCED_INLINING
-When: June 2006
-Why: Config option is there to see if gcc is good enough. (in january
- 2006). If it is, the behavior should just be the default. If it's not,
- the option should just go away entirely.
-Who: Arjan van de Ven
-
----------------------------
-
-What: eepro100 network driver
-When: January 2007
-Why: replaced by the e100 driver
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
-What: USB driver API moves to EXPORT_SYMBOL_GPL
-When: February 2008
-Files: include/linux/usb.h, drivers/usb/core/driver.c
-Why: The USB subsystem has changed a lot over time, and it has been
- possible to create userspace USB drivers using usbfs/libusb/gadgetfs
- that operate as fast as the USB bus allows. Because of this, the USB
- subsystem will not be allowing closed source kernel drivers to
- register with it, after this grace period is over. If anyone needs
- any help in converting their closed source drivers over to use the
- userspace filesystems, please contact the
- linux-usb-devel@lists.sourceforge.net mailing list, and the developers
- there will be glad to help you out.
-Who: Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
-What: vm_ops.nopage
-When: Soon, provided in-kernel callers have been converted
-Why: This interface is replaced by vm_ops.fault, but it has been around
- forever, is used by a lot of drivers, and doesn't cost much to
- maintain.
-Who: Nick Piggin <npiggin@suse.de>
-
----------------------------
-
-What: Interrupt only SA_* flags
-When: September 2007
-Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
- out of the signal namespace.
-
-Who: Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
---------------------------
-What: i2c_adapter.list
-When: July 2007
-Why: Superfluous, this list duplicates the one maintained by the driver
- core.
-Who: Jean Delvare <khali@linux-fr.org>,
- David Brownell <dbrownell@users.sourceforge.net>
-
----------------------------
-
-What: drivers depending on OBSOLETE_OSS
-When: options in 2.6.22, code in 2.6.24
-Why: OSS drivers with ALSA replacements
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: ACPI procfs interface
When: July 2008
Why: ACPI sysfs conversion should be finished by January 2008.
---------------------------
-What: Compaq touchscreen device emulation
-When: Oct 2007
-Files: drivers/input/tsdev.c
-Why: The code says it was obsolete when it was written in 2001.
- tslib is a userspace library which does anything tsdev can do and
- much more besides in userspace where this code belongs. There is no
- longer any need for tsdev and applications should have converted to
- use tslib by now.
- The name "tsdev" is also extremely confusing and lots of people have
- it loaded when they don't need/use it.
-Who: Richard Purdie <rpurdie@rpsys.net>
-
----------------------------
-
-What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
-When: September 2007
-Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific
- I2C-over-GPIO drivers.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: 'time' kernel boot parameter
-When: January 2008
-Why: replaced by 'printk.time=<value>' so that printk timestamps can be
- enabled or disabled as needed
-Who: Randy Dunlap <randy.dunlap@oracle.com>
-
----------------------------
-
-What: drivers depending on OSS_OBSOLETE
-When: options in 2.6.23, code in 2.6.25
-Why: obsolete OSS drivers
-Who: Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
---------------------------
-What: Legacy RTC drivers (under drivers/i2c/chips)
-When: November 2007
-Why: Obsolete. We have a RTC subsystem with better drivers.
-Who: Jean Delvare <khali@linux-fr.org>
+What: i386/x86_64 bzImage symlinks
+When: April 2010
+
+Why: The i386/x86_64 merge provides a symlink to the old bzImage
+ location so not yet updated user space tools, e.g. package
+ scripts, do not break.
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
+What (Why):
+ - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
+ (superseded by xt_TOS/xt_tos target & match)
+
+ - "forwarding" header files like ipt_mac.h in
+ include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
+
+ - xt_CONNMARK match revision 0
+ (superseded by xt_CONNMARK match revision 1)
+
+ - xt_MARK target revisions 0 and 1
+ (superseded by xt_MARK match revision 2)
+
+ - xt_connmark match revision 0
+ (superseded by xt_connmark match revision 1)
+
+ - xt_conntrack match revision 0
+ (superseded by xt_conntrack match revision 1)
+
+ - xt_iprange match revision 0,
+ include/linux/netfilter_ipv4/ipt_iprange.h
+ (superseded by xt_iprange match revision 1)
+
+ - xt_mark match revision 0
+ (superseded by xt_mark match revision 1)
+
+ - xt_recent: the old ipt_recent proc dir
+ (superseded by /proc/net/xt_recent)
+
+When: January 2009 or Linux 2.7.0, whichever comes first
+Why: Superseded by newer revisions or modules
+Who: Jan Engelhardt <jengelh@computergmbh.de>
+
+---------------------------
+
+What: b43 support for firmware revision < 410
+When: July 2008
+Why: The support code for the old firmware hurts code readability/maintainability
+ and slightly hurts runtime performance. Bugfixes for the old firmware
+ are not provided by Broadcom anymore.
+Who: Michael Buesch <mb@bu3sch.de>
+
+---------------------------
+
+What: usedac i386 kernel parameter
+When: 2.6.27
+Why: replaced by allowdac and no dac combination
+Who: Glauber Costa <gcosta@redhat.com>
---------------------------
-What: iptables SAME target
-When: 1.1. 2008
-Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h
-Why: Obsolete for multiple years now, NAT core provides the same behaviour.
- Unfixable broken wrt. 32/64 bit cleanness.
-Who: Patrick McHardy <kaber@trash.net>
+What: remove HID compat support
+When: 2.6.29
+Why: needed only as a temporary solution until distros fix themselves up
+Who: Jiri Slaby <jirislaby@gmail.com>
---------------------------
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64
- platforms. Currently there are efforts underway to port the remaining
- arch/ppc platforms to the merged tree. New submissions to the arch/ppc
- tree have been frozen with the 2.6.22 kernel release and that tree will
- remain in bug-fix only mode until its scheduled removal. Platforms
- that are not ported by June 2008 will be removed due to the lack of an
- interested maintainer.
-Who: linuxppc-dev@ozlabs.org
+What: print_fn_descriptor_symbol()
+When: October 2009
+Why: The %pF vsprintf format provides the same functionality in a
+ simpler way. print_fn_descriptor_symbol() is deprecated but
+ still present to give out-of-tree modules time to change.
+Who: Bjorn Helgaas <bjorn.helgaas@hp.com>
---------------------------
-What: mthca driver's MSI support
-When: January 2008
-Files: drivers/infiniband/hw/mthca/*.[ch]
-Why: All mthca hardware also supports MSI-X, which provides
- strictly more functionality than MSI. So there is no point in
- having both MSI-X and MSI support in the driver.
-Who: Roland Dreier <rolandd@cisco.com>
+What: /sys/o2cb symlink
+When: January 2010
+Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
+ exists as a symlink for backwards compatibility for old versions of
+ ocfs2-tools. 2 years should be sufficient time to phase in new versions
+ which know to look in /sys/fs/o2cb.
+Who: ocfs2-devel@oss.oracle.com
---------------------------
+
+What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
+ SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
+When: June 2009
+Why: A newer version of the options have been introduced in 2005 that
+ removes the limitions of the old API. The sctp library has been
+ converted to use these new options at the same time. Any user
+ space app that directly uses the old options should convert to using
+ the new options.
+Who: Vlad Yasevich <vladislav.yasevich@hp.com>
+
+---------------------------
+
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
+
+---------------------------
+
+What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
+ (in net/core/net-sysfs.c)
+When: After the only user (hal) has seen a release with the patches
+ for enough time, probably some time in 2010.
+Why: Over 1K .text/.data size reduction, data is available in other
+ ways (ioctls)
+Who: Johannes Berg <johannes@sipsolutions.net>
+
+---------------------------
+
+What: CONFIG_NF_CT_ACCT
+When: 2.6.29
+Why: Accounting can now be enabled/disabled without kernel recompilation.
+ Currently used only to set a default value for a feature that is also
+ controlled by a kernel/module/sysfs/sysctl parameter.
+Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+
+---------------------------
+
+What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
+When: 2.6.29 (ideally) or 2.6.30 (more likely)
+Why: Deprecated by the new (standard) device driver binding model. Use
+ i2c_driver->probe() and ->remove() instead.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: fscher and fscpos drivers
+When: June 2009
+Why: Deprecated by the new fschmd driver.
+Who: Hans de Goede <hdegoede@redhat.com>
+ Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: SELinux "compat_net" functionality
+When: 2.6.30 at the earliest
+Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
+ network access control functionality of SELinux. Secmark offers both
+ better performance and greater flexibility than the "compat_net"
+ mechanism. Now that the major Linux distributions have moved to
+ Secmark, it is time to deprecate the older mechanism and start the
+ process of removing the old code.
+Who: Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What: sysfs ui for changing p4-clockmod parameters
+When: September 2009
+Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+ e088e4c9cdb618675874becb91b2fd581ee707e6.
+ Removal is subject to fixing any remaining bugs in ACPI which may
+ cause the thermal throttling not to happen at the right time.
+Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff