netns xfrm: fix "ip xfrm state|policy count" misreport

[safe/jmp/linux-2.6] / Documentation / edac.txt

diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index ced5273..79c5332 100644 (file)
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'.
 The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
 for EDAC development, before it is sent upstream to kernel.org
 
-At the bluesmoke/EDAC project site, is a series of quilt patches against
-recent kernels, stored in a SVN respository. For easier downloading, there
+At the bluesmoke/EDAC project site is a series of quilt patches against
+recent kernels, stored in a SVN repository. For easier downloading, there
 is also a tarball snapshot available.
 
 ============================================================================
@@ -73,14 +73,14 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a pci device attribute located in sysfs that is
+In the kernel there is a PCI device attribute located in sysfs that is
 checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scannining is skipped for that device. The attribute
+PCI parity/error scanning is skipped for that device. The attribute
 is:
 
        broken_parity_status
 
-as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directorys for
+as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directories for
 PCI devices.
 
 FUTURE HARDWARE SCANNING
@@ -288,9 +288,8 @@ Total UE count that had no information attribute fileY:
 
        'ue_noinfo_count'
 
-       This attribute file displays the number of UEs that
-       have occurred have occurred with  no informations as to which DIMM
-       slot is having errors.
+       This attribute file displays the number of UEs that have occurred
+       with no information as to which DIMM slot is having errors.
 
 
 Total Correctable Errors count attribute file:
@@ -327,7 +326,7 @@ Sdram memory scrubbing rate:
        'sdram_scrub_rate'
 
        Read/Write attribute file that controls memory scrubbing. The scrubbing
-       rate is set by writing a minimum bandwith in bytes/sec to the attribute
+       rate is set by writing a minimum bandwidth in bytes/sec to the attribute
        file. The rate will be translated to an internal value that gives at
        least the specified rate.