/* * Copyright (c) 2008 open80211s Ltd. * Author: Luis Carlos Cobo * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include "ieee80211_i.h" #include "rate.h" #include "mesh.h" #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG #define mpl_dbg(fmt, args...) printk(KERN_DEBUG fmt, ##args) #else #define mpl_dbg(fmt, args...) do { (void)(0); } while (0) #endif #define PLINK_GET_FRAME_SUBTYPE(p) (p) #define PLINK_GET_LLID(p) (p + 1) #define PLINK_GET_PLID(p) (p + 3) #define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \ jiffies + HZ * t / 1000)) /* Peer link cancel reasons, all subject to ANA approval */ #define MESH_LINK_CANCELLED 2 #define MESH_MAX_NEIGHBORS 3 #define MESH_CAPABILITY_POLICY_VIOLATION 4 #define MESH_CLOSE_RCVD 5 #define MESH_MAX_RETRIES 6 #define MESH_CONFIRM_TIMEOUT 7 #define MESH_SECURITY_ROLE_NEGOTIATION_DIFFERS 8 #define MESH_SECURITY_AUTHENTICATION_IMPOSSIBLE 9 #define MESH_SECURITY_FAILED_VERIFICATION 10 #define dot11MeshMaxRetries(s) (s->u.mesh.mshcfg.dot11MeshMaxRetries) #define dot11MeshRetryTimeout(s) (s->u.mesh.mshcfg.dot11MeshRetryTimeout) #define dot11MeshConfirmTimeout(s) (s->u.mesh.mshcfg.dot11MeshConfirmTimeout) #define dot11MeshHoldingTimeout(s) (s->u.mesh.mshcfg.dot11MeshHoldingTimeout) #define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks) enum plink_frame_type { PLINK_OPEN = 0, PLINK_CONFIRM, PLINK_CLOSE }; enum plink_event { PLINK_UNDEFINED, OPN_ACPT, OPN_RJCT, OPN_IGNR, CNF_ACPT, CNF_RJCT, CNF_IGNR, CLS_ACPT, CLS_IGNR }; static inline void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) { atomic_inc(&sdata->u.mesh.mshstats.estab_plinks); mesh_accept_plinks_update(sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); } static inline void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) { atomic_dec(&sdata->u.mesh.mshstats.estab_plinks); mesh_accept_plinks_update(sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); } /** * mesh_plink_fsm_restart - restart a mesh peer link finite state machine * * @sta: mes peer link to restart * * Locking: this function must be called holding sta->lock */ static inline void mesh_plink_fsm_restart(struct sta_info *sta) { sta->plink_state = PLINK_LISTEN; sta->llid = sta->plid = sta->reason = 0; sta->plink_retries = 0; } /* * NOTE: This is just an alias for sta_info_alloc(), see notes * on it in the lifecycle management section! */ static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata, u8 *hw_addr, u32 rates) { struct ieee80211_local *local = sdata->local; struct sta_info *sta; if (local->num_sta >= MESH_MAX_PLINKS) return NULL; sta = sta_info_alloc(sdata, hw_addr, GFP_ATOMIC); if (!sta) return NULL; sta->flags = WLAN_STA_AUTHORIZED; sta->sta.supp_rates[local->hw.conf.channel->band] = rates; rate_control_rate_init(sta); return sta; } /** * mesh_plink_deactivate - deactivate mesh peer link * * @sta: mesh peer link to deactivate * * All mesh paths with this peer as next hop will be flushed * * Locking: the caller must hold sta->lock */ static void __mesh_plink_deactivate(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; if (sta->plink_state == PLINK_ESTAB) mesh_plink_dec_estab_count(sdata); sta->plink_state = PLINK_BLOCKED; mesh_path_flush_by_nexthop(sta); } /** * __mesh_plink_deactivate - deactivate mesh peer link * * @sta: mesh peer link to deactivate * * All mesh paths with this peer as next hop will be flushed */ void mesh_plink_deactivate(struct sta_info *sta) { spin_lock_bh(&sta->lock); __mesh_plink_deactivate(sta); spin_unlock_bh(&sta->lock); } static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid, __le16 reason) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); struct ieee80211_mgmt *mgmt; bool include_plid = false; u8 *pos; int ie_len; if (!skb) return -1; skb_reserve(skb, local->hw.extra_tx_headroom); /* 25 is the size of the common mgmt part (24) plus the size of the * common action part (1) */ mgmt = (struct ieee80211_mgmt *) skb_put(skb, 25 + sizeof(mgmt->u.action.u.plink_action)); memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.plink_action)); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION); memcpy(mgmt->da, da, ETH_ALEN); memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN); /* BSSID is left zeroed, wildcard value */ mgmt->u.action.category = PLINK_CATEGORY; mgmt->u.action.u.plink_action.action_code = action; if (action == PLINK_CLOSE) mgmt->u.action.u.plink_action.aux = reason; else { mgmt->u.action.u.plink_action.aux = cpu_to_le16(0x0); if (action == PLINK_CONFIRM) { pos = skb_put(skb, 4); /* two-byte status code followed by two-byte AID */ memset(pos, 0, 4); } mesh_mgmt_ies_add(skb, sdata); } /* Add Peer Link Management element */ switch (action) { case PLINK_OPEN: ie_len = 3; break; case PLINK_CONFIRM: ie_len = 5; include_plid = true; break; case PLINK_CLOSE: default: if (!plid) ie_len = 5; else { ie_len = 7; include_plid = true; } break; } pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PEER_LINK; *pos++ = ie_len; *pos++ = action; memcpy(pos, &llid, 2); if (include_plid) { pos += 2; memcpy(pos, &plid, 2); } if (action == PLINK_CLOSE) { pos += 2; memcpy(pos, &reason, 2); } ieee80211_tx_skb(sdata, skb, 1); return 0; } void mesh_neighbour_update(u8 *hw_addr, u32 rates, struct ieee80211_sub_if_data *sdata, bool peer_accepting_plinks) { struct ieee80211_local *local = sdata->local; struct sta_info *sta; rcu_read_lock(); sta = sta_info_get(local, hw_addr); if (!sta) { sta = mesh_plink_alloc(sdata, hw_addr, rates); if (!sta) { rcu_read_unlock(); return; } if (sta_info_insert(sta)) { rcu_read_unlock(); return; } } sta->last_rx = jiffies; sta->sta.supp_rates[local->hw.conf.channel->band] = rates; if (peer_accepting_plinks && sta->plink_state == PLINK_LISTEN && sdata->u.mesh.accepting_plinks && sdata->u.mesh.mshcfg.auto_open_plinks) mesh_plink_open(sta); rcu_read_unlock(); } static void mesh_plink_timer(unsigned long data) { struct sta_info *sta; __le16 llid, plid, reason; struct ieee80211_sub_if_data *sdata; /* * This STA is valid because sta_info_destroy() will * del_timer_sync() this timer after having made sure * it cannot be readded (by deleting the plink.) */ sta = (struct sta_info *) data; if (sta->sdata->local->quiescing) { sta->plink_timer_was_running = true; return; } spin_lock_bh(&sta->lock); if (sta->ignore_plink_timer) { sta->ignore_plink_timer = false; spin_unlock_bh(&sta->lock); return; } mpl_dbg("Mesh plink timer for %pM fired on state %d\n", sta->sta.addr, sta->plink_state); reason = 0; llid = sta->llid; plid = sta->plid; sdata = sta->sdata; switch (sta->plink_state) { case PLINK_OPN_RCVD: case PLINK_OPN_SNT: /* retry timer */ if (sta->plink_retries < dot11MeshMaxRetries(sdata)) { u32 rand; mpl_dbg("Mesh plink for %pM (retry, timeout): %d %d\n", sta->sta.addr, sta->plink_retries, sta->plink_timeout); get_random_bytes(&rand, sizeof(u32)); sta->plink_timeout = sta->plink_timeout + rand % sta->plink_timeout; ++sta->plink_retries; mod_plink_timer(sta, sta->plink_timeout); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid, 0, 0); break; } reason = cpu_to_le16(MESH_MAX_RETRIES); /* fall through on else */ case PLINK_CNF_RCVD: /* confirm timer */ if (!reason) reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT); sta->plink_state = PLINK_HOLDING; mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; case PLINK_HOLDING: /* holding timer */ del_timer(&sta->plink_timer); mesh_plink_fsm_restart(sta); spin_unlock_bh(&sta->lock); break; default: spin_unlock_bh(&sta->lock); break; } } #ifdef CONFIG_PM void mesh_plink_quiesce(struct sta_info *sta) { if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } void mesh_plink_restart(struct sta_info *sta) { if (sta->plink_timer_was_running) { add_timer(&sta->plink_timer); sta->plink_timer_was_running = false; } } #endif static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout) { sta->plink_timer.expires = jiffies + (HZ * timeout / 1000); sta->plink_timer.data = (unsigned long) sta; sta->plink_timer.function = mesh_plink_timer; sta->plink_timeout = timeout; add_timer(&sta->plink_timer); } int mesh_plink_open(struct sta_info *sta) { __le16 llid; struct ieee80211_sub_if_data *sdata = sta->sdata; spin_lock_bh(&sta->lock); get_random_bytes(&llid, 2); sta->llid = llid; if (sta->plink_state != PLINK_LISTEN) { spin_unlock_bh(&sta->lock); return -EBUSY; } sta->plink_state = PLINK_OPN_SNT; mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata)); spin_unlock_bh(&sta->lock); mpl_dbg("Mesh plink: starting establishment with %pM\n", sta->sta.addr); return mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid, 0, 0); } void mesh_plink_block(struct sta_info *sta) { spin_lock_bh(&sta->lock); __mesh_plink_deactivate(sta); sta->plink_state = PLINK_BLOCKED; spin_unlock_bh(&sta->lock); } void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { struct ieee80211_local *local = sdata->local; struct ieee802_11_elems elems; struct sta_info *sta; enum plink_event event; enum plink_frame_type ftype; size_t baselen; u8 ie_len; u8 *baseaddr; __le16 plid, llid, reason; /* need action_code, aux */ if (len < IEEE80211_MIN_ACTION_SIZE + 3) return; if (is_multicast_ether_addr(mgmt->da)) { mpl_dbg("Mesh plink: ignore frame from multicast address"); return; } baseaddr = mgmt->u.action.u.plink_action.variable; baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt; if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) { baseaddr += 4; baselen += 4; } ieee802_11_parse_elems(baseaddr, len - baselen, &elems); if (!elems.peer_link) { mpl_dbg("Mesh plink: missing necessary peer link ie\n"); return; } ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link)); ie_len = elems.peer_link_len; if ((ftype == PLINK_OPEN && ie_len != 3) || (ftype == PLINK_CONFIRM && ie_len != 5) || (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) { mpl_dbg("Mesh plink: incorrect plink ie length\n"); return; } if (ftype != PLINK_CLOSE && (!elems.mesh_id || !elems.mesh_config)) { mpl_dbg("Mesh plink: missing necessary ie\n"); return; } /* Note the lines below are correct, the llid in the frame is the plid * from the point of view of this host. */ memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2); if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7)) memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2); rcu_read_lock(); sta = sta_info_get(local, mgmt->sa); if (!sta && ftype != PLINK_OPEN) { mpl_dbg("Mesh plink: cls or cnf from unknown peer\n"); rcu_read_unlock(); return; } if (sta && sta->plink_state == PLINK_BLOCKED) { rcu_read_unlock(); return; } /* Now we will figure out the appropriate event... */ event = PLINK_UNDEFINED; if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, sdata))) { switch (ftype) { case PLINK_OPEN: event = OPN_RJCT; break; case PLINK_CONFIRM: event = CNF_RJCT; break; case PLINK_CLOSE: /* avoid warning */ break; } spin_lock_bh(&sta->lock); } else if (!sta) { /* ftype == PLINK_OPEN */ u32 rates; if (!mesh_plink_free_count(sdata)) { mpl_dbg("Mesh plink error: no more free plinks\n"); rcu_read_unlock(); return; } rates = ieee80211_sta_get_rates(local, &elems, rx_status->band); sta = mesh_plink_alloc(sdata, mgmt->sa, rates); if (!sta) { mpl_dbg("Mesh plink error: plink table full\n"); rcu_read_unlock(); return; } if (sta_info_insert(sta)) { rcu_read_unlock(); return; } event = OPN_ACPT; spin_lock_bh(&sta->lock); } else { spin_lock_bh(&sta->lock); switch (ftype) { case PLINK_OPEN: if (!mesh_plink_free_count(sdata) || (sta->plid && sta->plid != plid)) event = OPN_IGNR; else event = OPN_ACPT; break; case PLINK_CONFIRM: if (!mesh_plink_free_count(sdata) || (sta->llid != llid || sta->plid != plid)) event = CNF_IGNR; else event = CNF_ACPT; break; case PLINK_CLOSE: if (sta->plink_state == PLINK_ESTAB) /* Do not check for llid or plid. This does not * follow the standard but since multiple plinks * per sta are not supported, it is necessary in * order to avoid a livelock when MP A sees an * establish peer link to MP B but MP B does not * see it. This can be caused by a timeout in * B's peer link establishment or B beign * restarted. */ event = CLS_ACPT; else if (sta->plid != plid) event = CLS_IGNR; else if (ie_len == 7 && sta->llid != llid) event = CLS_IGNR; else event = CLS_ACPT; break; default: mpl_dbg("Mesh plink: unknown frame subtype\n"); spin_unlock_bh(&sta->lock); rcu_read_unlock(); return; } } mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %d %d %d %d\n", mgmt->sa, sta->plink_state, le16_to_cpu(sta->llid), le16_to_cpu(sta->plid), event); reason = 0; switch (sta->plink_state) { /* spin_unlock as soon as state is updated at each case */ case PLINK_LISTEN: switch (event) { case CLS_ACPT: mesh_plink_fsm_restart(sta); spin_unlock_bh(&sta->lock); break; case OPN_ACPT: sta->plink_state = PLINK_OPN_RCVD; sta->plid = plid; get_random_bytes(&llid, 2); sta->llid = llid; mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata)); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid, 0, 0); mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid, plid, 0); break; default: spin_unlock_bh(&sta->lock); break; } break; case PLINK_OPN_SNT: switch (event) { case OPN_RJCT: case CNF_RJCT: reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION); case CLS_ACPT: if (!reason) reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; sta->plink_state = PLINK_HOLDING; if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) sta->ignore_plink_timer = true; llid = sta->llid; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; case OPN_ACPT: /* retry timer is left untouched */ sta->plink_state = PLINK_OPN_RCVD; sta->plid = plid; llid = sta->llid; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid, plid, 0); break; case CNF_ACPT: sta->plink_state = PLINK_CNF_RCVD; if (!mod_plink_timer(sta, dot11MeshConfirmTimeout(sdata))) sta->ignore_plink_timer = true; spin_unlock_bh(&sta->lock); break; default: spin_unlock_bh(&sta->lock); break; } break; case PLINK_OPN_RCVD: switch (event) { case OPN_RJCT: case CNF_RJCT: reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION); case CLS_ACPT: if (!reason) reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; sta->plink_state = PLINK_HOLDING; if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) sta->ignore_plink_timer = true; llid = sta->llid; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; case OPN_ACPT: llid = sta->llid; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid, plid, 0); break; case CNF_ACPT: del_timer(&sta->plink_timer); sta->plink_state = PLINK_ESTAB; mesh_plink_inc_estab_count(sdata); spin_unlock_bh(&sta->lock); mpl_dbg("Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); break; default: spin_unlock_bh(&sta->lock); break; } break; case PLINK_CNF_RCVD: switch (event) { case OPN_RJCT: case CNF_RJCT: reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION); case CLS_ACPT: if (!reason) reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; sta->plink_state = PLINK_HOLDING; if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) sta->ignore_plink_timer = true; llid = sta->llid; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; case OPN_ACPT: del_timer(&sta->plink_timer); sta->plink_state = PLINK_ESTAB; mesh_plink_inc_estab_count(sdata); spin_unlock_bh(&sta->lock); mpl_dbg("Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid, plid, 0); break; default: spin_unlock_bh(&sta->lock); break; } break; case PLINK_ESTAB: switch (event) { case CLS_ACPT: reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; __mesh_plink_deactivate(sta); sta->plink_state = PLINK_HOLDING; llid = sta->llid; mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; case OPN_ACPT: llid = sta->llid; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid, plid, 0); break; default: spin_unlock_bh(&sta->lock); break; } break; case PLINK_HOLDING: switch (event) { case CLS_ACPT: if (del_timer(&sta->plink_timer)) sta->ignore_plink_timer = 1; mesh_plink_fsm_restart(sta); spin_unlock_bh(&sta->lock); break; case OPN_ACPT: case CNF_ACPT: case OPN_RJCT: case CNF_RJCT: llid = sta->llid; reason = sta->reason; spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; default: spin_unlock_bh(&sta->lock); } break; default: /* should not get here, PLINK_BLOCKED is dealt with at the * beggining of the function */ spin_unlock_bh(&sta->lock); break; } rcu_read_unlock(); }