/* * NOTE: this file will be removed in a future kernel release, it is * provided as a courtesy copy of user-space code that relies on the * old (pre-rename) symbols and constants. * * Performance events: * * Copyright (C) 2008-2009, Thomas Gleixner * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra * * Data type definitions, declarations, prototypes. * * Started by: Thomas Gleixner and Ingo Molnar * * For licencing details see kernel-base/COPYING */ #ifndef _LINUX_PERF_COUNTER_H #define _LINUX_PERF_COUNTER_H #include #include #include /* * User-space ABI bits: */ /* * attr.type */ enum perf_type_id { PERF_TYPE_HARDWARE = 0, PERF_TYPE_SOFTWARE = 1, PERF_TYPE_TRACEPOINT = 2, PERF_TYPE_HW_CACHE = 3, PERF_TYPE_RAW = 4, PERF_TYPE_MAX, /* non-ABI */ }; /* * Generalized performance counter event types, used by the * attr.event_id parameter of the sys_perf_counter_open() * syscall: */ enum perf_hw_id { /* * Common hardware events, generalized by the kernel: */ PERF_COUNT_HW_CPU_CYCLES = 0, PERF_COUNT_HW_INSTRUCTIONS = 1, PERF_COUNT_HW_CACHE_REFERENCES = 2, PERF_COUNT_HW_CACHE_MISSES = 3, PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, PERF_COUNT_HW_BRANCH_MISSES = 5, PERF_COUNT_HW_BUS_CYCLES = 6, PERF_COUNT_HW_MAX, /* non-ABI */ }; /* * Generalized hardware cache counters: * * { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x * { read, write, prefetch } x * { accesses, misses } */ enum perf_hw_cache_id { PERF_COUNT_HW_CACHE_L1D = 0, PERF_COUNT_HW_CACHE_L1I = 1, PERF_COUNT_HW_CACHE_LL = 2, PERF_COUNT_HW_CACHE_DTLB = 3, PERF_COUNT_HW_CACHE_ITLB = 4, PERF_COUNT_HW_CACHE_BPU = 5, PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ }; enum perf_hw_cache_op_id { PERF_COUNT_HW_CACHE_OP_READ = 0, PERF_COUNT_HW_CACHE_OP_WRITE = 1, PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ }; enum perf_hw_cache_op_result_id { PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, PERF_COUNT_HW_CACHE_RESULT_MISS = 1, PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ }; /* * Special "software" counters provided by the kernel, even if the hardware * does not support performance counters. These counters measure various * physical and sw events of the kernel (and allow the profiling of them as * well): */ enum perf_sw_ids { PERF_COUNT_SW_CPU_CLOCK = 0, PERF_COUNT_SW_TASK_CLOCK = 1, PERF_COUNT_SW_PAGE_FAULTS = 2, PERF_COUNT_SW_CONTEXT_SWITCHES = 3, PERF_COUNT_SW_CPU_MIGRATIONS = 4, PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, PERF_COUNT_SW_MAX, /* non-ABI */ }; /* * Bits that can be set in attr.sample_type to request information * in the overflow packets. */ enum perf_counter_sample_format { PERF_SAMPLE_IP = 1U << 0, PERF_SAMPLE_TID = 1U << 1, PERF_SAMPLE_TIME = 1U << 2, PERF_SAMPLE_ADDR = 1U << 3, PERF_SAMPLE_READ = 1U << 4, PERF_SAMPLE_CALLCHAIN = 1U << 5, PERF_SAMPLE_ID = 1U << 6, PERF_SAMPLE_CPU = 1U << 7, PERF_SAMPLE_PERIOD = 1U << 8, PERF_SAMPLE_STREAM_ID = 1U << 9, PERF_SAMPLE_RAW = 1U << 10, PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ }; /* * The format of the data returned by read() on a perf counter fd, * as specified by attr.read_format: * * struct read_format { * { u64 value; * { u64 time_enabled; } && PERF_FORMAT_ENABLED * { u64 time_running; } && PERF_FORMAT_RUNNING * { u64 id; } && PERF_FORMAT_ID * } && !PERF_FORMAT_GROUP * * { u64 nr; * { u64 time_enabled; } && PERF_FORMAT_ENABLED * { u64 time_running; } && PERF_FORMAT_RUNNING * { u64 value; * { u64 id; } && PERF_FORMAT_ID * } cntr[nr]; * } && PERF_FORMAT_GROUP * }; */ enum perf_counter_read_format { PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, PERF_FORMAT_ID = 1U << 2, PERF_FORMAT_GROUP = 1U << 3, PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ }; #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ /* * Hardware event to monitor via a performance monitoring counter: */ struct perf_counter_attr { /* * Major type: hardware/software/tracepoint/etc. */ __u32 type; /* * Size of the attr structure, for fwd/bwd compat. */ __u32 size; /* * Type specific configuration information. */ __u64 config; union { __u64 sample_period; __u64 sample_freq; }; __u64 sample_type; __u64 read_format; __u64 disabled : 1, /* off by default */ inherit : 1, /* children inherit it */ pinned : 1, /* must always be on PMU */ exclusive : 1, /* only group on PMU */ exclude_user : 1, /* don't count user */ exclude_kernel : 1, /* ditto kernel */ exclude_hv : 1, /* ditto hypervisor */ exclude_idle : 1, /* don't count when idle */ mmap : 1, /* include mmap data */ comm : 1, /* include comm data */ freq : 1, /* use freq, not period */ inherit_stat : 1, /* per task counts */ enable_on_exec : 1, /* next exec enables */ task : 1, /* trace fork/exit */ watermark : 1, /* wakeup_watermark */ __reserved_1 : 49; union { __u32 wakeup_events; /* wakeup every n events */ __u32 wakeup_watermark; /* bytes before wakeup */ }; __u32 __reserved_2; __u64 __reserved_3; }; /* * Ioctls that can be done on a perf counter fd: */ #define PERF_COUNTER_IOC_ENABLE _IO ('$', 0) #define PERF_COUNTER_IOC_DISABLE _IO ('$', 1) #define PERF_COUNTER_IOC_REFRESH _IO ('$', 2) #define PERF_COUNTER_IOC_RESET _IO ('$', 3) #define PERF_COUNTER_IOC_PERIOD _IOW('$', 4, u64) #define PERF_COUNTER_IOC_SET_OUTPUT _IO ('$', 5) enum perf_counter_ioc_flags { PERF_IOC_FLAG_GROUP = 1U << 0, }; /* * Structure of the page that can be mapped via mmap */ struct perf_counter_mmap_page { __u32 version; /* version number of this structure */ __u32 compat_version; /* lowest version this is compat with */ /* * Bits needed to read the hw counters in user-space. * * u32 seq; * s64 count; * * do { * seq = pc->lock; * * barrier() * if (pc->index) { * count = pmc_read(pc->index - 1); * count += pc->offset; * } else * goto regular_read; * * barrier(); * } while (pc->lock != seq); * * NOTE: for obvious reason this only works on self-monitoring * processes. */ __u32 lock; /* seqlock for synchronization */ __u32 index; /* hardware counter identifier */ __s64 offset; /* add to hardware counter value */ __u64 time_enabled; /* time counter active */ __u64 time_running; /* time counter on cpu */ /* * Hole for extension of the self monitor capabilities */ __u64 __reserved[123]; /* align to 1k */ /* * Control data for the mmap() data buffer. * * User-space reading the @data_head value should issue an rmb(), on * SMP capable platforms, after reading this value -- see * perf_counter_wakeup(). * * When the mapping is PROT_WRITE the @data_tail value should be * written by userspace to reflect the last read data. In this case * the kernel will not over-write unread data. */ __u64 data_head; /* head in the data section */ __u64 data_tail; /* user-space written tail */ }; #define PERF_EVENT_MISC_CPUMODE_MASK (3 << 0) #define PERF_EVENT_MISC_CPUMODE_UNKNOWN (0 << 0) #define PERF_EVENT_MISC_KERNEL (1 << 0) #define PERF_EVENT_MISC_USER (2 << 0) #define PERF_EVENT_MISC_HYPERVISOR (3 << 0) struct perf_event_header { __u32 type; __u16 misc; __u16 size; }; enum perf_event_type { /* * The MMAP events record the PROT_EXEC mappings so that we can * correlate userspace IPs to code. They have the following structure: * * struct { * struct perf_event_header header; * * u32 pid, tid; * u64 addr; * u64 len; * u64 pgoff; * char filename[]; * }; */ PERF_EVENT_MMAP = 1, /* * struct { * struct perf_event_header header; * u64 id; * u64 lost; * }; */ PERF_EVENT_LOST = 2, /* * struct { * struct perf_event_header header; * * u32 pid, tid; * char comm[]; * }; */ PERF_EVENT_COMM = 3, /* * struct { * struct perf_event_header header; * u32 pid, ppid; * u32 tid, ptid; * u64 time; * }; */ PERF_EVENT_EXIT = 4, /* * struct { * struct perf_event_header header; * u64 time; * u64 id; * u64 stream_id; * }; */ PERF_EVENT_THROTTLE = 5, PERF_EVENT_UNTHROTTLE = 6, /* * struct { * struct perf_event_header header; * u32 pid, ppid; * u32 tid, ptid; * u64 time; * }; */ PERF_EVENT_FORK = 7, /* * struct { * struct perf_event_header header; * u32 pid, tid; * * struct read_format values; * }; */ PERF_EVENT_READ = 8, /* * struct { * struct perf_event_header header; * * { u64 ip; } && PERF_SAMPLE_IP * { u32 pid, tid; } && PERF_SAMPLE_TID * { u64 time; } && PERF_SAMPLE_TIME * { u64 addr; } && PERF_SAMPLE_ADDR * { u64 id; } && PERF_SAMPLE_ID * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID * { u32 cpu, res; } && PERF_SAMPLE_CPU * { u64 period; } && PERF_SAMPLE_PERIOD * * { struct read_format values; } && PERF_SAMPLE_READ * * { u64 nr, * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN * * # * # The RAW record below is opaque data wrt the ABI * # * # That is, the ABI doesn't make any promises wrt to * # the stability of its content, it may vary depending * # on event, hardware, kernel version and phase of * # the moon. * # * # In other words, PERF_SAMPLE_RAW contents are not an ABI. * # * * { u32 size; * char data[size];}&& PERF_SAMPLE_RAW * }; */ PERF_EVENT_SAMPLE = 9, PERF_EVENT_MAX, /* non-ABI */ }; enum perf_callchain_context { PERF_CONTEXT_HV = (__u64)-32, PERF_CONTEXT_KERNEL = (__u64)-128, PERF_CONTEXT_USER = (__u64)-512, PERF_CONTEXT_GUEST = (__u64)-2048, PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, PERF_CONTEXT_GUEST_USER = (__u64)-2560, PERF_CONTEXT_MAX = (__u64)-4095, }; #define PERF_FLAG_FD_NO_GROUP (1U << 0) #define PERF_FLAG_FD_OUTPUT (1U << 1) /* * In case some app still references the old symbols: */ #define __NR_perf_counter_open __NR_perf_event_open #define PR_TASK_PERF_COUNTERS_DISABLE PR_TASK_PERF_EVENTS_DISABLE #define PR_TASK_PERF_COUNTERS_ENABLE PR_TASK_PERF_EVENTS_ENABLE #endif /* _LINUX_PERF_COUNTER_H */