/* * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * *------------------------------------------------------------------------------ * * et131x_adapter.h - Header which includes the private adapter structure, along * with related support structures, macros, definitions, etc. * *------------------------------------------------------------------------------ * * SOFTWARE LICENSE * * This software is provided subject to the following terms and conditions, * which you should read carefully before using the software. Using this * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without * modifications, are permitted provided that the following conditions are met: * * . Redistributions of source code must retain the above copyright notice, this * list of conditions and the following Disclaimer as comments in the code as * well as in the documentation and/or other materials provided with the * distribution. * * . Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following Disclaimer in the documentation * and/or other materials provided with the distribution. * * . Neither the name of Agere Systems Inc. nor the names of the contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * Disclaimer * * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. * */ #ifndef __ET131X_ADAPTER_H__ #define __ET131X_ADAPTER_H__ #include "et1310_address_map.h" #include "et1310_tx.h" #include "et1310_rx.h" /* * Do not change these values: if changed, then change also in respective * TXdma and Rxdma engines */ #define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */ #define NUM_TCB 64 /* * These values are all superseded by registry entries to facilitate tuning. * Once the desired performance has been achieved, the optimal registry values * should be re-populated to these #defines: */ #define NUM_TRAFFIC_CLASSES 1 /* * There are three ways of counting errors - if there are more than X errors * in Y packets (represented by the "SAMPLE" macros), if there are more than * N errors in a S mSec time period (the "PERIOD" macros), or if there are * consecutive packets with errors (CONSEC_ERRORED_THRESH). This last covers * for "Bursty" errors, and the errored packets may well not be contiguous, * but several errors where the packet counter has changed by less than a * small amount will cause this count to increment. */ #define TX_PACKETS_IN_SAMPLE 10000 #define TX_MAX_ERRORS_IN_SAMPLE 50 #define TX_ERROR_PERIOD 1000 #define TX_MAX_ERRORS_IN_PERIOD 10 #define LINK_DETECTION_TIMER 5000 #define TX_CONSEC_RANGE 5 #define TX_CONSEC_ERRORED_THRESH 10 #define LO_MARK_PERCENT_FOR_PSR 15 #define LO_MARK_PERCENT_FOR_RX 15 /* Counters for error rate monitoring */ typedef struct _MP_ERR_COUNTERS { u32 PktCountTxPackets; u32 PktCountTxErrors; u32 TimerBasedTxErrors; u32 PktCountLastError; u32 ErredConsecPackets; } MP_ERR_COUNTERS, *PMP_ERR_COUNTERS; /* RFD (Receive Frame Descriptor) */ typedef struct _MP_RFD { struct list_head list_node; struct sk_buff *Packet; u32 PacketSize; /* total size of receive frame */ u16 bufferindex; u8 ringindex; } MP_RFD, *PMP_RFD; /* Enum for Flow Control */ typedef enum _eflow_control_t { Both = 0, TxOnly = 1, RxOnly = 2, None = 3 } eFLOW_CONTROL_t, *PeFLOW_CONTROL_t; /* Struct to define some device statistics */ typedef struct _ce_stats_t { /* Link Input/Output stats */ uint64_t ipackets; /* # of in packets */ uint64_t opackets; /* # of out packets */ /* MIB II variables * * NOTE: atomic_t types are only guaranteed to store 24-bits; if we * MUST have 32, then we'll need another way to perform atomic * operations */ u32 unircv; /* # multicast packets received */ atomic_t unixmt; /* # multicast packets for Tx */ u32 multircv; /* # multicast packets received */ atomic_t multixmt; /* # multicast packets for Tx */ u32 brdcstrcv; /* # broadcast packets received */ atomic_t brdcstxmt; /* # broadcast packets for Tx */ u32 norcvbuf; /* # Rx packets discarded */ u32 noxmtbuf; /* # Tx packets discarded */ /* Transciever state informations. */ u8 xcvr_addr; u32 xcvr_id; /* Tx Statistics. */ u32 tx_uflo; /* Tx Underruns */ u32 collisions; u32 excessive_collisions; u32 first_collision; u32 late_collisions; u32 max_pkt_error; u32 tx_deferred; /* Rx Statistics. */ u32 rx_ov_flow; /* Rx Overflow */ u32 length_err; u32 alignment_err; u32 crc_err; u32 code_violations; u32 other_errors; u32 SynchrounousIterations; u32 InterruptStatus; } CE_STATS_t, *PCE_STATS_t; /* The private adapter structure */ struct et131x_adapter { struct net_device *netdev; struct pci_dev *pdev; struct work_struct task; /* Flags that indicate current state of the adapter */ u32 Flags; u32 HwErrCount; /* Configuration */ u8 PermanentAddress[ETH_ALEN]; u8 CurrentAddress[ETH_ALEN]; bool has_eeprom; u8 eepromData[2]; /* Spinlocks */ spinlock_t Lock; spinlock_t TCBSendQLock; spinlock_t TCBReadyQLock; spinlock_t SendHWLock; spinlock_t RcvLock; spinlock_t RcvPendLock; spinlock_t FbrLock; spinlock_t PHYLock; /* Packet Filter and look ahead size */ u32 PacketFilter; u32 linkspeed; u32 duplex_mode; /* multicast list */ u32 MCAddressCount; u8 MCList[NIC_MAX_MCAST_LIST][ETH_ALEN]; /* MAC test */ TXMAC_TXTEST_t TxMacTest; /* Pointer to the device's PCI register space */ ADDRESS_MAP_t __iomem *regs; /* Registry parameters */ u8 SpeedDuplex; /* speed/duplex */ eFLOW_CONTROL_t RegistryFlowControl; /* for 802.3x flow control */ u8 RegistryPhyComa; /* Phy Coma mode enable/disable */ u32 RegistryRxMemEnd; /* Size of internal rx memory */ u32 RegistryJumboPacket; /* Max supported ethernet packet size */ /* Derived from the registry: */ u8 AiForceDpx; /* duplex setting */ u16 AiForceSpeed; /* 'Speed', user over-ride of line speed */ eFLOW_CONTROL_t FlowControl; /* flow control validated by the far-end */ enum { NETIF_STATUS_INVALID = 0, NETIF_STATUS_MEDIA_CONNECT, NETIF_STATUS_MEDIA_DISCONNECT, NETIF_STATUS_MAX } MediaState; /* Minimize init-time */ struct timer_list ErrorTimer; MP_POWER_MGMT PoMgmt; u32 CachedMaskValue; /* Xcvr status at last poll */ MI_BMSR_t Bmsr; /* Tx Memory Variables */ struct tx_ring tx_ring; /* Rx Memory Variables */ RX_RING_t RxRing; /* Loopback specifics */ u8 ReplicaPhyLoopbk; /* Replica Enable */ u8 ReplicaPhyLoopbkPF; /* Replica Enable Pass/Fail */ /* Stats */ CE_STATS_t Stats; struct net_device_stats net_stats; struct net_device_stats net_stats_prev; }; #endif /* __ET131X_ADAPTER_H__ */