04cbf3eaf05a1cd8ae683d1ca2d39be50b0f5156
[safe/jmp/linux-2.6] / sound / pci / echoaudio / darla24.c
1 /*
2  *  ALSA driver for Echoaudio soundcards.
3  *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
4  *
5  *  This program is free software; you can redistribute it and/or modify
6  *  it under the terms of the GNU General Public License as published by
7  *  the Free Software Foundation; version 2 of the License.
8  *
9  *  This program is distributed in the hope that it will be useful,
10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  *  GNU General Public License for more details.
13  *
14  *  You should have received a copy of the GNU General Public License
15  *  along with this program; if not, write to the Free Software
16  *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
17  */
18
19 #define ECHOGALS_FAMILY
20 #define ECHOCARD_DARLA24
21 #define ECHOCARD_NAME "Darla24"
22 #define ECHOCARD_HAS_MONITOR
23 #define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
24 #define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
25 #define ECHOCARD_HAS_EXTERNAL_CLOCK
26 #define ECHOCARD_HAS_SUPER_INTERLEAVE
27
28 /* Pipe indexes */
29 #define PX_ANALOG_OUT   0       /* 8 */
30 #define PX_DIGITAL_OUT  8       /* 0 */
31 #define PX_ANALOG_IN    8       /* 2 */
32 #define PX_DIGITAL_IN   10      /* 0 */
33 #define PX_NUM          10
34
35 /* Bus indexes */
36 #define BX_ANALOG_OUT   0       /* 8 */
37 #define BX_DIGITAL_OUT  8       /* 0 */
38 #define BX_ANALOG_IN    8       /* 2 */
39 #define BX_DIGITAL_IN   10      /* 0 */
40 #define BX_NUM          10
41
42
43 #include <linux/delay.h>
44 #include <linux/init.h>
45 #include <linux/interrupt.h>
46 #include <linux/pci.h>
47 #include <linux/slab.h>
48 #include <linux/moduleparam.h>
49 #include <linux/firmware.h>
50 #include <sound/core.h>
51 #include <sound/info.h>
52 #include <sound/control.h>
53 #include <sound/tlv.h>
54 #include <sound/pcm.h>
55 #include <sound/pcm_params.h>
56 #include <sound/asoundef.h>
57 #include <sound/initval.h>
58 #include <asm/io.h>
59 #include <asm/atomic.h>
60 #include "echoaudio.h"
61
62 MODULE_FIRMWARE("ea/darla24_dsp.fw");
63
64 #define FW_DARLA24_DSP  0
65
66 static const struct firmware card_fw[] = {
67         {0, "darla24_dsp.fw"}
68 };
69
70 static struct pci_device_id snd_echo_ids[] = {
71         {0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0},      /* DSP 56301 Darla24 rev.0 */
72         {0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0},      /* DSP 56301 Darla24 rev.1 */
73         {0,}
74 };
75
76 static struct snd_pcm_hardware pcm_hardware_skel = {
77         .info = SNDRV_PCM_INFO_MMAP |
78                 SNDRV_PCM_INFO_INTERLEAVED |
79                 SNDRV_PCM_INFO_BLOCK_TRANSFER |
80                 SNDRV_PCM_INFO_MMAP_VALID |
81                 SNDRV_PCM_INFO_PAUSE |
82                 SNDRV_PCM_INFO_SYNC_START,
83         .formats =      SNDRV_PCM_FMTBIT_U8 |
84                         SNDRV_PCM_FMTBIT_S16_LE |
85                         SNDRV_PCM_FMTBIT_S24_3LE |
86                         SNDRV_PCM_FMTBIT_S32_LE |
87                         SNDRV_PCM_FMTBIT_S32_BE,
88         .rates =        SNDRV_PCM_RATE_8000_48000 |
89                         SNDRV_PCM_RATE_88200 |
90                         SNDRV_PCM_RATE_96000,
91         .rate_min = 8000,
92         .rate_max = 96000,
93         .channels_min = 1,
94         .channels_max = 8,
95         .buffer_bytes_max = 262144,
96         .period_bytes_min = 32,
97         .period_bytes_max = 131072,
98         .periods_min = 2,
99         .periods_max = 220,
100         /* One page (4k) contains 512 instructions. I don't know if the hw
101         supports lists longer than this. In this case periods_max=220 is a
102         safe limit to make sure the list never exceeds 512 instructions. */
103 };
104
105
106 #include "darla24_dsp.c"
107 #include "echoaudio_dsp.c"
108 #include "echoaudio.c"