nfsd: track last inode only in use_wgather case
[safe/jmp/linux-2.6] / include / sound / ac97_codec.h
1 #ifndef __SOUND_AC97_CODEC_H
2 #define __SOUND_AC97_CODEC_H
3
4 /*
5  *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
6  *  Universal interface for Audio Codec '97
7  *
8  *  For more details look to AC '97 component specification revision 2.1
9  *  by Intel Corporation (http://developer.intel.com).
10  *
11  *
12  *   This program is free software; you can redistribute it and/or modify
13  *   it under the terms of the GNU General Public License as published by
14  *   the Free Software Foundation; either version 2 of the License, or
15  *   (at your option) any later version.
16  *
17  *   This program is distributed in the hope that it will be useful,
18  *   but WITHOUT ANY WARRANTY; without even the implied warranty of
19  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  *   GNU General Public License for more details.
21  *
22  *   You should have received a copy of the GNU General Public License
23  *   along with this program; if not, write to the Free Software
24  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
25  *
26  */
27
28 #include <linux/bitops.h>
29 #include <linux/device.h>
30 #include <linux/workqueue.h>
31 #include "pcm.h"
32 #include "control.h"
33 #include "info.h"
34
35 /*
36  *  AC'97 codec registers
37  */
38
39 #define AC97_RESET              0x00    /* Reset */
40 #define AC97_MASTER             0x02    /* Master Volume */
41 #define AC97_HEADPHONE          0x04    /* Headphone Volume (optional) */
42 #define AC97_MASTER_MONO        0x06    /* Master Volume Mono (optional) */
43 #define AC97_MASTER_TONE        0x08    /* Master Tone (Bass & Treble) (optional) */
44 #define AC97_PC_BEEP            0x0a    /* PC Beep Volume (optinal) */
45 #define AC97_PHONE              0x0c    /* Phone Volume (optional) */
46 #define AC97_MIC                0x0e    /* MIC Volume */
47 #define AC97_LINE               0x10    /* Line In Volume */
48 #define AC97_CD                 0x12    /* CD Volume */
49 #define AC97_VIDEO              0x14    /* Video Volume (optional) */
50 #define AC97_AUX                0x16    /* AUX Volume (optional) */
51 #define AC97_PCM                0x18    /* PCM Volume */
52 #define AC97_REC_SEL            0x1a    /* Record Select */
53 #define AC97_REC_GAIN           0x1c    /* Record Gain */
54 #define AC97_REC_GAIN_MIC       0x1e    /* Record Gain MIC (optional) */
55 #define AC97_GENERAL_PURPOSE    0x20    /* General Purpose (optional) */
56 #define AC97_3D_CONTROL         0x22    /* 3D Control (optional) */
57 #define AC97_INT_PAGING         0x24    /* Audio Interrupt & Paging (AC'97 2.3) */
58 #define AC97_POWERDOWN          0x26    /* Powerdown control / status */
59 /* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
60 #define AC97_EXTENDED_ID        0x28    /* Extended Audio ID */
61 #define AC97_EXTENDED_STATUS    0x2a    /* Extended Audio Status and Control */
62 #define AC97_PCM_FRONT_DAC_RATE 0x2c    /* PCM Front DAC Rate */
63 #define AC97_PCM_SURR_DAC_RATE  0x2e    /* PCM Surround DAC Rate */
64 #define AC97_PCM_LFE_DAC_RATE   0x30    /* PCM LFE DAC Rate */
65 #define AC97_PCM_LR_ADC_RATE    0x32    /* PCM LR ADC Rate */
66 #define AC97_PCM_MIC_ADC_RATE   0x34    /* PCM MIC ADC Rate */
67 #define AC97_CENTER_LFE_MASTER  0x36    /* Center + LFE Master Volume */
68 #define AC97_SURROUND_MASTER    0x38    /* Surround (Rear) Master Volume */
69 #define AC97_SPDIF              0x3a    /* S/PDIF control */
70 /* range 0x3c-0x58 - MODEM */
71 #define AC97_EXTENDED_MID       0x3c    /* Extended Modem ID */
72 #define AC97_EXTENDED_MSTATUS   0x3e    /* Extended Modem Status and Control */
73 #define AC97_LINE1_RATE         0x40    /* Line1 DAC/ADC Rate */
74 #define AC97_LINE2_RATE         0x42    /* Line2 DAC/ADC Rate */
75 #define AC97_HANDSET_RATE       0x44    /* Handset DAC/ADC Rate */
76 #define AC97_LINE1_LEVEL        0x46    /* Line1 DAC/ADC Level */
77 #define AC97_LINE2_LEVEL        0x48    /* Line2 DAC/ADC Level */
78 #define AC97_HANDSET_LEVEL      0x4a    /* Handset DAC/ADC Level */
79 #define AC97_GPIO_CFG           0x4c    /* GPIO Configuration */
80 #define AC97_GPIO_POLARITY      0x4e    /* GPIO Pin Polarity/Type, 0=low, 1=high active */
81 #define AC97_GPIO_STICKY        0x50    /* GPIO Pin Sticky, 0=not, 1=sticky */
82 #define AC97_GPIO_WAKEUP        0x52    /* GPIO Pin Wakeup, 0=no int, 1=yes int */
83 #define AC97_GPIO_STATUS        0x54    /* GPIO Pin Status, slot 12 */
84 #define AC97_MISC_AFE           0x56    /* Miscellaneous Modem AFE Status and Control */
85 /* range 0x5a-0x7b - Vendor Specific */
86 #define AC97_VENDOR_ID1         0x7c    /* Vendor ID1 */
87 #define AC97_VENDOR_ID2         0x7e    /* Vendor ID2 / revision */
88 /* range 0x60-0x6f (page 1) - extended codec registers */
89 #define AC97_CODEC_CLASS_REV    0x60    /* Codec Class/Revision */
90 #define AC97_PCI_SVID           0x62    /* PCI Subsystem Vendor ID */
91 #define AC97_PCI_SID            0x64    /* PCI Subsystem ID */
92 #define AC97_FUNC_SELECT        0x66    /* Function Select */
93 #define AC97_FUNC_INFO          0x68    /* Function Information */
94 #define AC97_SENSE_INFO         0x6a    /* Sense Details */
95
96 /* slot allocation */
97 #define AC97_SLOT_TAG           0
98 #define AC97_SLOT_CMD_ADDR      1
99 #define AC97_SLOT_CMD_DATA      2
100 #define AC97_SLOT_PCM_LEFT      3
101 #define AC97_SLOT_PCM_RIGHT     4
102 #define AC97_SLOT_MODEM_LINE1   5
103 #define AC97_SLOT_PCM_CENTER    6
104 #define AC97_SLOT_MIC           6       /* input */
105 #define AC97_SLOT_SPDIF_LEFT1   6
106 #define AC97_SLOT_PCM_SLEFT     7       /* surround left */
107 #define AC97_SLOT_PCM_LEFT_0    7       /* double rate operation */
108 #define AC97_SLOT_SPDIF_LEFT    7
109 #define AC97_SLOT_PCM_SRIGHT    8       /* surround right */
110 #define AC97_SLOT_PCM_RIGHT_0   8       /* double rate operation */
111 #define AC97_SLOT_SPDIF_RIGHT   8
112 #define AC97_SLOT_LFE           9
113 #define AC97_SLOT_SPDIF_RIGHT1  9
114 #define AC97_SLOT_MODEM_LINE2   10
115 #define AC97_SLOT_PCM_LEFT_1    10      /* double rate operation */
116 #define AC97_SLOT_SPDIF_LEFT2   10
117 #define AC97_SLOT_HANDSET       11      /* output */
118 #define AC97_SLOT_PCM_RIGHT_1   11      /* double rate operation */
119 #define AC97_SLOT_SPDIF_RIGHT2  11
120 #define AC97_SLOT_MODEM_GPIO    12      /* modem GPIO */
121 #define AC97_SLOT_PCM_CENTER_1  12      /* double rate operation */
122
123 /* basic capabilities (reset register) */
124 #define AC97_BC_DEDICATED_MIC   0x0001  /* Dedicated Mic PCM In Channel */
125 #define AC97_BC_RESERVED1       0x0002  /* Reserved (was Modem Line Codec support) */
126 #define AC97_BC_BASS_TREBLE     0x0004  /* Bass & Treble Control */
127 #define AC97_BC_SIM_STEREO      0x0008  /* Simulated stereo */
128 #define AC97_BC_HEADPHONE       0x0010  /* Headphone Out Support */
129 #define AC97_BC_LOUDNESS        0x0020  /* Loudness (bass boost) Support */
130 #define AC97_BC_16BIT_DAC       0x0000  /* 16-bit DAC resolution */
131 #define AC97_BC_18BIT_DAC       0x0040  /* 18-bit DAC resolution */
132 #define AC97_BC_20BIT_DAC       0x0080  /* 20-bit DAC resolution */
133 #define AC97_BC_DAC_MASK        0x00c0
134 #define AC97_BC_16BIT_ADC       0x0000  /* 16-bit ADC resolution */
135 #define AC97_BC_18BIT_ADC       0x0100  /* 18-bit ADC resolution */
136 #define AC97_BC_20BIT_ADC       0x0200  /* 20-bit ADC resolution */
137 #define AC97_BC_ADC_MASK        0x0300
138
139 /* general purpose */
140 #define AC97_GP_DRSS_MASK       0x0c00  /* double rate slot select */
141 #define AC97_GP_DRSS_1011       0x0000  /* LR(C) 10+11(+12) */
142 #define AC97_GP_DRSS_78         0x0400  /* LR 7+8 */
143
144 /* powerdown bits */
145 #define AC97_PD_ADC_STATUS      0x0001  /* ADC status (RO) */
146 #define AC97_PD_DAC_STATUS      0x0002  /* DAC status (RO) */
147 #define AC97_PD_MIXER_STATUS    0x0004  /* Analog mixer status (RO) */
148 #define AC97_PD_VREF_STATUS     0x0008  /* Vref status (RO) */
149 #define AC97_PD_PR0             0x0100  /* Power down PCM ADCs and input MUX */
150 #define AC97_PD_PR1             0x0200  /* Power down PCM front DAC */
151 #define AC97_PD_PR2             0x0400  /* Power down Mixer (Vref still on) */
152 #define AC97_PD_PR3             0x0800  /* Power down Mixer (Vref off) */
153 #define AC97_PD_PR4             0x1000  /* Power down AC-Link */
154 #define AC97_PD_PR5             0x2000  /* Disable internal clock usage */
155 #define AC97_PD_PR6             0x4000  /* Headphone amplifier */
156 #define AC97_PD_EAPD            0x8000  /* External Amplifer Power Down (EAPD) */
157
158 /* extended audio ID bit defines */
159 #define AC97_EI_VRA             0x0001  /* Variable bit rate supported */
160 #define AC97_EI_DRA             0x0002  /* Double rate supported */
161 #define AC97_EI_SPDIF           0x0004  /* S/PDIF out supported */
162 #define AC97_EI_VRM             0x0008  /* Variable bit rate supported for MIC */
163 #define AC97_EI_DACS_SLOT_MASK  0x0030  /* DACs slot assignment */
164 #define AC97_EI_DACS_SLOT_SHIFT 4
165 #define AC97_EI_CDAC            0x0040  /* PCM Center DAC available */
166 #define AC97_EI_SDAC            0x0080  /* PCM Surround DACs available */
167 #define AC97_EI_LDAC            0x0100  /* PCM LFE DAC available */
168 #define AC97_EI_AMAP            0x0200  /* indicates optional slot/DAC mapping based on codec ID */
169 #define AC97_EI_REV_MASK        0x0c00  /* AC'97 revision mask */
170 #define AC97_EI_REV_22          0x0400  /* AC'97 revision 2.2 */
171 #define AC97_EI_REV_23          0x0800  /* AC'97 revision 2.3 */
172 #define AC97_EI_REV_SHIFT       10
173 #define AC97_EI_ADDR_MASK       0xc000  /* physical codec ID (address) */
174 #define AC97_EI_ADDR_SHIFT      14
175
176 /* extended audio status and control bit defines */
177 #define AC97_EA_VRA             0x0001  /* Variable bit rate enable bit */
178 #define AC97_EA_DRA             0x0002  /* Double-rate audio enable bit */
179 #define AC97_EA_SPDIF           0x0004  /* S/PDIF out enable bit */
180 #define AC97_EA_VRM             0x0008  /* Variable bit rate for MIC enable bit */
181 #define AC97_EA_SPSA_SLOT_MASK  0x0030  /* Mask for slot assignment bits */
182 #define AC97_EA_SPSA_SLOT_SHIFT 4
183 #define AC97_EA_SPSA_3_4        0x0000  /* Slot assigned to 3 & 4 */
184 #define AC97_EA_SPSA_7_8        0x0010  /* Slot assigned to 7 & 8 */
185 #define AC97_EA_SPSA_6_9        0x0020  /* Slot assigned to 6 & 9 */
186 #define AC97_EA_SPSA_10_11      0x0030  /* Slot assigned to 10 & 11 */
187 #define AC97_EA_CDAC            0x0040  /* PCM Center DAC is ready (Read only) */
188 #define AC97_EA_SDAC            0x0080  /* PCM Surround DACs are ready (Read only) */
189 #define AC97_EA_LDAC            0x0100  /* PCM LFE DAC is ready (Read only) */
190 #define AC97_EA_MDAC            0x0200  /* MIC ADC is ready (Read only) */
191 #define AC97_EA_SPCV            0x0400  /* S/PDIF configuration valid (Read only) */
192 #define AC97_EA_PRI             0x0800  /* Turns the PCM Center DAC off */
193 #define AC97_EA_PRJ             0x1000  /* Turns the PCM Surround DACs off */
194 #define AC97_EA_PRK             0x2000  /* Turns the PCM LFE DAC off */
195 #define AC97_EA_PRL             0x4000  /* Turns the MIC ADC off */
196
197 /* S/PDIF control bit defines */
198 #define AC97_SC_PRO             0x0001  /* Professional status */
199 #define AC97_SC_NAUDIO          0x0002  /* Non audio stream */
200 #define AC97_SC_COPY            0x0004  /* Copyright status */
201 #define AC97_SC_PRE             0x0008  /* Preemphasis status */
202 #define AC97_SC_CC_MASK         0x07f0  /* Category Code mask */
203 #define AC97_SC_CC_SHIFT        4
204 #define AC97_SC_L               0x0800  /* Generation Level status */
205 #define AC97_SC_SPSR_MASK       0x3000  /* S/PDIF Sample Rate bits */
206 #define AC97_SC_SPSR_SHIFT      12
207 #define AC97_SC_SPSR_44K        0x0000  /* Use 44.1kHz Sample rate */
208 #define AC97_SC_SPSR_48K        0x2000  /* Use 48kHz Sample rate */
209 #define AC97_SC_SPSR_32K        0x3000  /* Use 32kHz Sample rate */
210 #define AC97_SC_DRS             0x4000  /* Double Rate S/PDIF */
211 #define AC97_SC_V               0x8000  /* Validity status */
212
213 /* Interrupt and Paging bit defines (AC'97 2.3) */
214 #define AC97_PAGE_MASK          0x000f  /* Page Selector */
215 #define AC97_PAGE_VENDOR        0       /* Vendor-specific registers */
216 #define AC97_PAGE_1             1       /* Extended Codec Registers page 1 */
217 #define AC97_INT_ENABLE         0x0800  /* Interrupt Enable */
218 #define AC97_INT_SENSE          0x1000  /* Sense Cycle */
219 #define AC97_INT_CAUSE_SENSE    0x2000  /* Sense Cycle Completed (RO) */
220 #define AC97_INT_CAUSE_GPIO     0x4000  /* GPIO bits changed (RO) */
221 #define AC97_INT_STATUS         0x8000  /* Interrupt Status */
222
223 /* extended modem ID bit defines */
224 #define AC97_MEI_LINE1          0x0001  /* Line1 present */
225 #define AC97_MEI_LINE2          0x0002  /* Line2 present */
226 #define AC97_MEI_HANDSET        0x0004  /* Handset present */
227 #define AC97_MEI_CID1           0x0008  /* caller ID decode for Line1 is supported */
228 #define AC97_MEI_CID2           0x0010  /* caller ID decode for Line2 is supported */
229 #define AC97_MEI_ADDR_MASK      0xc000  /* physical codec ID (address) */
230 #define AC97_MEI_ADDR_SHIFT     14
231
232 /* extended modem status and control bit defines */
233 #define AC97_MEA_GPIO           0x0001  /* GPIO is ready (ro) */
234 #define AC97_MEA_MREF           0x0002  /* Vref is up to nominal level (ro) */
235 #define AC97_MEA_ADC1           0x0004  /* ADC1 operational (ro) */
236 #define AC97_MEA_DAC1           0x0008  /* DAC1 operational (ro) */
237 #define AC97_MEA_ADC2           0x0010  /* ADC2 operational (ro) */
238 #define AC97_MEA_DAC2           0x0020  /* DAC2 operational (ro) */
239 #define AC97_MEA_HADC           0x0040  /* HADC operational (ro) */
240 #define AC97_MEA_HDAC           0x0080  /* HDAC operational (ro) */
241 #define AC97_MEA_PRA            0x0100  /* GPIO power down (high) */
242 #define AC97_MEA_PRB            0x0200  /* reserved */
243 #define AC97_MEA_PRC            0x0400  /* ADC1 power down (high) */
244 #define AC97_MEA_PRD            0x0800  /* DAC1 power down (high) */
245 #define AC97_MEA_PRE            0x1000  /* ADC2 power down (high) */
246 #define AC97_MEA_PRF            0x2000  /* DAC2 power down (high) */
247 #define AC97_MEA_PRG            0x4000  /* HADC power down (high) */
248 #define AC97_MEA_PRH            0x8000  /* HDAC power down (high) */
249
250 /* modem gpio status defines */
251 #define AC97_GPIO_LINE1_OH      0x0001  /* Off Hook Line1 */
252 #define AC97_GPIO_LINE1_RI      0x0002  /* Ring Detect Line1 */
253 #define AC97_GPIO_LINE1_CID     0x0004  /* Caller ID path enable Line1 */
254 #define AC97_GPIO_LINE1_LCS     0x0008  /* Loop Current Sense Line1 */
255 #define AC97_GPIO_LINE1_PULSE   0x0010  /* Opt./ Pulse Dial Line1 (out) */
256 #define AC97_GPIO_LINE1_HL1R    0x0020  /* Opt./ Handset to Line1 relay control (out) */
257 #define AC97_GPIO_LINE1_HOHD    0x0040  /* Opt./ Handset off hook detect Line1 (in) */
258 #define AC97_GPIO_LINE12_AC     0x0080  /* Opt./ Int.bit 1 / Line1/2 AC (out) */
259 #define AC97_GPIO_LINE12_DC     0x0100  /* Opt./ Int.bit 2 / Line1/2 DC (out) */
260 #define AC97_GPIO_LINE12_RS     0x0200  /* Opt./ Int.bit 3 / Line1/2 RS (out) */
261 #define AC97_GPIO_LINE2_OH      0x0400  /* Off Hook Line2 */
262 #define AC97_GPIO_LINE2_RI      0x0800  /* Ring Detect Line2 */
263 #define AC97_GPIO_LINE2_CID     0x1000  /* Caller ID path enable Line2 */
264 #define AC97_GPIO_LINE2_LCS     0x2000  /* Loop Current Sense Line2 */
265 #define AC97_GPIO_LINE2_PULSE   0x4000  /* Opt./ Pulse Dial Line2 (out) */
266 #define AC97_GPIO_LINE2_HL1R    0x8000  /* Opt./ Handset to Line2 relay control (out) */
267
268 /* specific - SigmaTel */
269 #define AC97_SIGMATEL_OUTSEL    0x64    /* Output Select, STAC9758 */
270 #define AC97_SIGMATEL_INSEL     0x66    /* Input Select, STAC9758 */
271 #define AC97_SIGMATEL_IOMISC    0x68    /* STAC9758 */
272 #define AC97_SIGMATEL_ANALOG    0x6c    /* Analog Special */
273 #define AC97_SIGMATEL_DAC2INVERT 0x6e
274 #define AC97_SIGMATEL_BIAS1     0x70
275 #define AC97_SIGMATEL_BIAS2     0x72
276 #define AC97_SIGMATEL_VARIOUS   0x72    /* STAC9758 */
277 #define AC97_SIGMATEL_MULTICHN  0x74    /* Multi-Channel programming */
278 #define AC97_SIGMATEL_CIC1      0x76
279 #define AC97_SIGMATEL_CIC2      0x78
280
281 /* specific - Analog Devices */
282 #define AC97_AD_TEST            0x5a    /* test register */
283 #define AC97_AD_TEST2           0x5c    /* undocumented test register 2 */
284 #define AC97_AD_HPFD_SHIFT      12      /* High Pass Filter Disable */
285 #define AC97_AD_CODEC_CFG       0x70    /* codec configuration */
286 #define AC97_AD_JACK_SPDIF      0x72    /* Jack Sense & S/PDIF */
287 #define AC97_AD_SERIAL_CFG      0x74    /* Serial Configuration */
288 #define AC97_AD_MISC            0x76    /* Misc Control Bits */
289 #define AC97_AD_VREFD_SHIFT     2       /* V_REFOUT Disable (AD1888) */
290
291 /* specific - Cirrus Logic */
292 #define AC97_CSR_ACMODE         0x5e    /* AC Mode Register */
293 #define AC97_CSR_MISC_CRYSTAL   0x60    /* Misc Crystal Control */
294 #define AC97_CSR_SPDIF          0x68    /* S/PDIF Register */
295 #define AC97_CSR_SERIAL         0x6a    /* Serial Port Control */
296 #define AC97_CSR_SPECF_ADDR     0x6c    /* Special Feature Address */
297 #define AC97_CSR_SPECF_DATA     0x6e    /* Special Feature Data */
298 #define AC97_CSR_BDI_STATUS     0x7a    /* BDI Status */
299
300 /* specific - Conexant */
301 #define AC97_CXR_AUDIO_MISC     0x5c
302 #define AC97_CXR_SPDIFEN        (1<<3)
303 #define AC97_CXR_COPYRGT        (1<<2)
304 #define AC97_CXR_SPDIF_MASK     (3<<0)
305 #define AC97_CXR_SPDIF_PCM      0x0
306 #define AC97_CXR_SPDIF_AC3      0x2
307
308 /* specific - ALC */
309 #define AC97_ALC650_SPDIF_INPUT_STATUS1 0x60
310 /* S/PDIF input status 1 bit defines */
311 #define AC97_ALC650_PRO             0x0001  /* Professional status */
312 #define AC97_ALC650_NAUDIO          0x0002  /* Non audio stream */
313 #define AC97_ALC650_COPY            0x0004  /* Copyright status */
314 #define AC97_ALC650_PRE             0x0038  /* Preemphasis status */
315 #define AC97_ALC650_PRE_SHIFT       3
316 #define AC97_ALC650_MODE            0x00C0  /* Preemphasis status */
317 #define AC97_ALC650_MODE_SHIFT      6
318 #define AC97_ALC650_CC_MASK         0x7f00  /* Category Code mask */
319 #define AC97_ALC650_CC_SHIFT        8
320 #define AC97_ALC650_L               0x8000  /* Generation Level status */
321
322 #define AC97_ALC650_SPDIF_INPUT_STATUS2 0x62
323 /* S/PDIF input status 2 bit defines */
324 #define AC97_ALC650_SOUCE_MASK      0x000f  /* Source number */
325 #define AC97_ALC650_CHANNEL_MASK    0x00f0  /* Channel number */
326 #define AC97_ALC650_CHANNEL_SHIFT   4 
327 #define AC97_ALC650_SPSR_MASK       0x0f00  /* S/PDIF Sample Rate bits */
328 #define AC97_ALC650_SPSR_SHIFT      8
329 #define AC97_ALC650_SPSR_44K        0x0000  /* Use 44.1kHz Sample rate */
330 #define AC97_ALC650_SPSR_48K        0x0200  /* Use 48kHz Sample rate */
331 #define AC97_ALC650_SPSR_32K        0x0300  /* Use 32kHz Sample rate */
332 #define AC97_ALC650_CLOCK_ACCURACY  0x3000  /* Clock accuracy */
333 #define AC97_ALC650_CLOCK_SHIFT     12
334 #define AC97_ALC650_CLOCK_LOCK      0x4000  /* Clock locked status */
335 #define AC97_ALC650_V               0x8000  /* Validity status */
336
337 #define AC97_ALC650_SURR_DAC_VOL        0x64
338 #define AC97_ALC650_LFE_DAC_VOL         0x66
339 #define AC97_ALC650_UNKNOWN1            0x68
340 #define AC97_ALC650_MULTICH             0x6a
341 #define AC97_ALC650_UNKNOWN2            0x6c
342 #define AC97_ALC650_REVISION            0x6e
343 #define AC97_ALC650_UNKNOWN3            0x70
344 #define AC97_ALC650_UNKNOWN4            0x72
345 #define AC97_ALC650_MISC                0x74
346 #define AC97_ALC650_GPIO_SETUP          0x76
347 #define AC97_ALC650_GPIO_STATUS         0x78
348 #define AC97_ALC650_CLOCK               0x7a
349
350 /* specific - Yamaha YMF7x3 */
351 #define AC97_YMF7X3_DIT_CTRL    0x66    /* DIT Control (YMF743) / 2 (YMF753) */
352 #define AC97_YMF7X3_3D_MODE_SEL 0x68    /* 3D Mode Select */
353
354 /* specific - C-Media */
355 #define AC97_CM9738_VENDOR_CTRL 0x5a
356 #define AC97_CM9739_MULTI_CHAN  0x64
357 #define AC97_CM9739_SPDIF_IN_STATUS     0x68 /* 32bit */
358 #define AC97_CM9739_SPDIF_CTRL  0x6c
359
360 /* specific - wolfson */
361 #define AC97_WM97XX_FMIXER_VOL  0x72
362 #define AC97_WM9704_RMIXER_VOL  0x74
363 #define AC97_WM9704_TEST        0x5a
364 #define AC97_WM9704_RPCM_VOL    0x70
365 #define AC97_WM9711_OUT3VOL     0x16
366
367
368 /* ac97->scaps */
369 #define AC97_SCAP_AUDIO         (1<<0)  /* audio codec 97 */
370 #define AC97_SCAP_MODEM         (1<<1)  /* modem codec 97 */
371 #define AC97_SCAP_SURROUND_DAC  (1<<2)  /* surround L&R DACs are present */
372 #define AC97_SCAP_CENTER_LFE_DAC (1<<3) /* center and LFE DACs are present */
373 #define AC97_SCAP_SKIP_AUDIO    (1<<4)  /* skip audio part of codec */
374 #define AC97_SCAP_SKIP_MODEM    (1<<5)  /* skip modem part of codec */
375 #define AC97_SCAP_INDEP_SDIN    (1<<6)  /* independent SDIN */
376 #define AC97_SCAP_INV_EAPD      (1<<7)  /* inverted EAPD */
377 #define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
378 #define AC97_SCAP_NO_SPDIF      (1<<9)  /* don't build SPDIF controls */
379 #define AC97_SCAP_EAPD_LED      (1<<10) /* EAPD as mute LED */
380 #define AC97_SCAP_POWER_SAVE    (1<<11) /* capable for aggresive power-saving */
381
382 /* ac97->flags */
383 #define AC97_HAS_PC_BEEP        (1<<0)  /* force PC Speaker usage */
384 #define AC97_AD_MULTI           (1<<1)  /* Analog Devices - multi codecs */
385 #define AC97_CS_SPDIF           (1<<2)  /* Cirrus Logic uses funky SPDIF */
386 #define AC97_CX_SPDIF           (1<<3)  /* Conexant's spdif interface */
387 #define AC97_STEREO_MUTES       (1<<4)  /* has stereo mute bits */
388 #define AC97_DOUBLE_RATE        (1<<5)  /* supports double rate playback */
389 #define AC97_HAS_NO_MASTER_VOL  (1<<6)  /* no Master volume */
390 #define AC97_HAS_NO_PCM_VOL     (1<<7)  /* no PCM volume */
391 #define AC97_DEFAULT_POWER_OFF  (1<<8)  /* no RESET write */
392 #define AC97_MODEM_PATCH        (1<<9)  /* modem patch */
393 #define AC97_HAS_NO_REC_GAIN    (1<<10) /* no Record gain */
394 #define AC97_HAS_NO_PHONE       (1<<11) /* no PHONE volume */
395 #define AC97_HAS_NO_PC_BEEP     (1<<12) /* no PC Beep volume */
396 #define AC97_HAS_NO_VIDEO       (1<<13) /* no Video volume */
397 #define AC97_HAS_NO_CD          (1<<14) /* no CD volume */
398 #define AC97_HAS_NO_MIC (1<<15) /* no MIC volume */
399 #define AC97_HAS_NO_TONE        (1<<16) /* no Tone volume */
400 #define AC97_HAS_NO_STD_PCM     (1<<17) /* no standard AC97 PCM volume and mute */
401 #define AC97_HAS_NO_AUX         (1<<18) /* no standard AC97 AUX volume and mute */
402 #define AC97_HAS_8CH            (1<<19) /* supports 8-channel output */
403
404 /* rates indexes */
405 #define AC97_RATES_FRONT_DAC    0
406 #define AC97_RATES_SURR_DAC     1
407 #define AC97_RATES_LFE_DAC      2
408 #define AC97_RATES_ADC          3
409 #define AC97_RATES_MIC_ADC      4
410 #define AC97_RATES_SPDIF        5
411
412 /*
413  *
414  */
415
416 struct snd_ac97;
417
418 struct snd_ac97_build_ops {
419         int (*build_3d) (struct snd_ac97 *ac97);
420         int (*build_specific) (struct snd_ac97 *ac97);
421         int (*build_spdif) (struct snd_ac97 *ac97);
422         int (*build_post_spdif) (struct snd_ac97 *ac97);
423 #ifdef CONFIG_PM
424         void (*suspend) (struct snd_ac97 *ac97);
425         void (*resume) (struct snd_ac97 *ac97);
426 #endif
427         void (*update_jacks) (struct snd_ac97 *ac97);   /* for jack-sharing */
428 };
429
430 struct snd_ac97_bus_ops {
431         void (*reset) (struct snd_ac97 *ac97);
432         void (*warm_reset)(struct snd_ac97 *ac97);
433         void (*write) (struct snd_ac97 *ac97, unsigned short reg, unsigned short val);
434         unsigned short (*read) (struct snd_ac97 *ac97, unsigned short reg);
435         void (*wait) (struct snd_ac97 *ac97);
436         void (*init) (struct snd_ac97 *ac97);
437 };
438
439 struct snd_ac97_bus {
440         /* -- lowlevel (hardware) driver specific -- */
441         struct snd_ac97_bus_ops *ops;
442         void *private_data;
443         void (*private_free) (struct snd_ac97_bus *bus);
444         /* --- */
445         struct snd_card *card;
446         unsigned short num;     /* bus number */
447         unsigned short no_vra: 1, /* bridge doesn't support VRA */
448                        dra: 1,  /* bridge supports double rate */
449                        isdin: 1;/* independent SDIN */
450         unsigned int clock;     /* AC'97 base clock (usually 48000Hz) */
451         spinlock_t bus_lock;    /* used mainly for slot allocation */
452         unsigned short used_slots[2][4]; /* actually used PCM slots */
453         unsigned short pcms_count; /* count of PCMs */
454         struct ac97_pcm *pcms;
455         struct snd_ac97 *codec[4];
456         struct snd_info_entry *proc;
457 };
458
459 /* static resolution table */
460 struct snd_ac97_res_table {
461         unsigned short reg;     /* register */
462         unsigned short bits;    /* resolution bitmask */
463 };
464
465 struct snd_ac97_template {
466         void *private_data;
467         void (*private_free) (struct snd_ac97 *ac97);
468         struct pci_dev *pci;    /* assigned PCI device - used for quirks */
469         unsigned short num;     /* number of codec: 0 = primary, 1 = secondary */
470         unsigned short addr;    /* physical address of codec [0-3] */
471         unsigned int scaps;     /* driver capabilities */
472         const struct snd_ac97_res_table *res_table;     /* static resolution */
473 };
474
475 struct snd_ac97 {
476         /* -- lowlevel (hardware) driver specific -- */
477         struct snd_ac97_build_ops * build_ops;
478         void *private_data;
479         void (*private_free) (struct snd_ac97 *ac97);
480         /* --- */
481         struct snd_ac97_bus *bus;
482         struct pci_dev *pci;    /* assigned PCI device - used for quirks */
483         struct snd_info_entry *proc;
484         struct snd_info_entry *proc_regs;
485         unsigned short subsystem_vendor;
486         unsigned short subsystem_device;
487         struct mutex reg_mutex;
488         struct mutex page_mutex;        /* mutex for AD18xx multi-codecs and paging (2.3) */
489         unsigned short num;     /* number of codec: 0 = primary, 1 = secondary */
490         unsigned short addr;    /* physical address of codec [0-3] */
491         unsigned int id;        /* identification of codec */
492         unsigned short caps;    /* capabilities (register 0) */
493         unsigned short ext_id;  /* extended feature identification (register 28) */
494         unsigned short ext_mid; /* extended modem ID (register 3C) */
495         const struct snd_ac97_res_table *res_table;     /* static resolution */
496         unsigned int scaps;     /* driver capabilities */
497         unsigned int flags;     /* specific code */
498         unsigned int rates[6];  /* see AC97_RATES_* defines */
499         unsigned int spdif_status;
500         unsigned short regs[0x80]; /* register cache */
501         DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
502         union {                 /* vendor specific code */
503                 struct {
504                         unsigned short unchained[3];    // 0 = C34, 1 = C79, 2 = C69
505                         unsigned short chained[3];      // 0 = C34, 1 = C79, 2 = C69
506                         unsigned short id[3];           // codec IDs (lower 16-bit word)
507                         unsigned short pcmreg[3];       // PCM registers
508                         unsigned short codec_cfg[3];    // CODEC_CFG bits
509                         unsigned char swap_mic_linein;  // AD1986/AD1986A only
510                         unsigned char lo_as_master;     /* LO as master */
511                 } ad18xx;
512                 unsigned int dev_flags;         /* device specific */
513         } spec;
514         /* jack-sharing info */
515         unsigned char indep_surround;
516         unsigned char channel_mode;
517
518 #ifdef CONFIG_SND_AC97_POWER_SAVE
519         unsigned int power_up;  /* power states */
520         struct delayed_work power_work;
521 #endif
522         struct device dev;
523 };
524
525 #define to_ac97_t(d) container_of(d, struct snd_ac97, dev)
526
527 /* conditions */
528 static inline int ac97_is_audio(struct snd_ac97 * ac97)
529 {
530         return (ac97->scaps & AC97_SCAP_AUDIO);
531 }
532 static inline int ac97_is_modem(struct snd_ac97 * ac97)
533 {
534         return (ac97->scaps & AC97_SCAP_MODEM);
535 }
536 static inline int ac97_is_rev22(struct snd_ac97 * ac97)
537 {
538         return (ac97->ext_id & AC97_EI_REV_MASK) >= AC97_EI_REV_22;
539 }
540 static inline int ac97_can_amap(struct snd_ac97 * ac97)
541 {
542         return (ac97->ext_id & AC97_EI_AMAP) != 0;
543 }
544 static inline int ac97_can_spdif(struct snd_ac97 * ac97)
545 {
546         return (ac97->ext_id & AC97_EI_SPDIF) != 0;
547 }
548
549 /* functions */
550 /* create new AC97 bus */
551 int snd_ac97_bus(struct snd_card *card, int num, struct snd_ac97_bus_ops *ops,
552                  void *private_data, struct snd_ac97_bus **rbus);
553 /* create mixer controls */
554 int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
555                    struct snd_ac97 **rac97);
556 const char *snd_ac97_get_short_name(struct snd_ac97 *ac97);
557
558 void snd_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
559 unsigned short snd_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
560 void snd_ac97_write_cache(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
561 int snd_ac97_update(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
562 int snd_ac97_update_bits(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value);
563 #ifdef CONFIG_SND_AC97_POWER_SAVE
564 int snd_ac97_update_power(struct snd_ac97 *ac97, int reg, int powerup);
565 #else
566 static inline int snd_ac97_update_power(struct snd_ac97 *ac97, int reg,
567                                         int powerup)
568 {
569         return 0;
570 }
571 #endif
572 #ifdef CONFIG_PM
573 void snd_ac97_suspend(struct snd_ac97 *ac97);
574 void snd_ac97_resume(struct snd_ac97 *ac97);
575 #endif
576
577 /* quirk types */
578 enum {
579         AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */
580         AC97_TUNE_NONE = 0,     /* nothing extra to do */
581         AC97_TUNE_HP_ONLY,      /* headphone (true line-out) control as master only */
582         AC97_TUNE_SWAP_HP,      /* swap headphone and master controls */
583         AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
584         AC97_TUNE_AD_SHARING,   /* for AD1985, turn on OMS bit and use headphone */
585         AC97_TUNE_ALC_JACK,     /* for Realtek, enable JACK detection */
586         AC97_TUNE_INV_EAPD,     /* inverted EAPD implementation */
587         AC97_TUNE_MUTE_LED,     /* EAPD bit works as mute LED */
588         AC97_TUNE_HP_MUTE_LED,  /* EAPD bit works as mute LED, use headphone control as master */
589 };
590
591 struct ac97_quirk {
592         unsigned short subvendor; /* PCI subsystem vendor id */
593         unsigned short subdevice; /* PCI sybsystem device id */
594         unsigned short mask;    /* device id bit mask, 0 = accept all */
595         unsigned int codec_id;  /* codec id (if any), 0 = accept all */
596         const char *name;       /* name shown as info */
597         int type;               /* quirk type above */
598 };
599
600 int snd_ac97_tune_hardware(struct snd_ac97 *ac97, struct ac97_quirk *quirk, const char *override);
601 int snd_ac97_set_rate(struct snd_ac97 *ac97, int reg, unsigned int rate);
602
603 /*
604  * PCM allocation
605  */
606
607 enum ac97_pcm_cfg {
608         AC97_PCM_CFG_FRONT = 2,
609         AC97_PCM_CFG_REAR = 10,         /* alias surround */
610         AC97_PCM_CFG_LFE = 11,          /* center + lfe */
611         AC97_PCM_CFG_40 = 4,            /* front + rear */
612         AC97_PCM_CFG_51 = 6,            /* front + rear + center/lfe */
613         AC97_PCM_CFG_SPDIF = 20
614 };
615
616 struct ac97_pcm {
617         struct snd_ac97_bus *bus;
618         unsigned int stream: 1,            /* stream type: 1 = capture */
619                      exclusive: 1,         /* exclusive mode, don't override with other pcms */
620                      copy_flag: 1,         /* lowlevel driver must fill all entries */
621                      spdif: 1;             /* spdif pcm */
622         unsigned short aslots;             /* active slots */
623         unsigned short cur_dbl;            /* current double-rate state */
624         unsigned int rates;                /* available rates */
625         struct {
626                 unsigned short slots;      /* driver input: requested AC97 slot numbers */
627                 unsigned short rslots[4];  /* allocated slots per codecs */
628                 unsigned char rate_table[4];
629                 struct snd_ac97 *codec[4];         /* allocated codecs */
630         } r[2];                            /* 0 = standard rates, 1 = double rates */
631         unsigned long private_value;       /* used by the hardware driver */
632 };
633
634 int snd_ac97_pcm_assign(struct snd_ac97_bus *ac97,
635                         unsigned short pcms_count,
636                         const struct ac97_pcm *pcms);
637 int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
638                       enum ac97_pcm_cfg cfg, unsigned short slots);
639 int snd_ac97_pcm_close(struct ac97_pcm *pcm);
640 int snd_ac97_pcm_double_rate_rules(struct snd_pcm_runtime *runtime);
641
642 /* ad hoc AC97 device driver access */
643 extern struct bus_type ac97_bus_type;
644
645 #endif /* __SOUND_AC97_CODEC_H */