SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/video/intelfb/intelfbhw.c

   1 /*
   2  * intelfb
   3  *
   4  * Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
   5  *
   6  * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
   7  *                   2004 Sylvain Meyer
   8  *
   9  * This driver consists of two parts.  The first part (intelfbdrv.c) provides
  10  * the basic fbdev interfaces, is derived in part from the radeonfb and
  11  * vesafb drivers, and is covered by the GPL.  The second part (intelfbhw.c)
  12  * provides the code to program the hardware.  Most of it is derived from
  13  * the i810/i830 XFree86 driver.  The HW-specific code is covered here
  14  * under a dual license (GPL and MIT/XFree86 license).
  15  *
  16  * Author: David Dawes
  17  *
  18  */
  19
  20 /* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
  21
  22 #include <linux/config.h>
  23 #include <linux/module.h>
  24 #include <linux/kernel.h>
  25 #include <linux/errno.h>
  26 #include <linux/string.h>
  27 #include <linux/mm.h>
  28 #include <linux/tty.h>
  29 #include <linux/slab.h>
  30 #include <linux/delay.h>
  31 #include <linux/fb.h>
  32 #include <linux/ioport.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/pagemap.h>
  37
  38 #include <asm/io.h>
  39
  40 #include "intelfb.h"
  41 #include "intelfbhw.h"
  42
  43 struct pll_min_max {
  44         int min_m, max_m, min_m1, max_m1;
  45         int min_m2, max_m2, min_n, max_n;
  46         int min_p, max_p, min_p1, max_p1;
  47         int min_vco, max_vco, p_transition_clk, ref_clk;
  48         int p_inc_lo, p_inc_hi;
  49 };
  50
  51 #define PLLS_I8xx 0
  52 #define PLLS_I9xx 1
  53 #define PLLS_MAX 2
  54
  55 static struct pll_min_max plls[PLLS_MAX] = {
  56         { 108, 140, 18, 26,
  57           6, 16, 3, 16,
  58           4, 128, 0, 31,
  59           930000, 1400000, 165000, 48000,
  60           4, 2 }, //I8xx
  61
  62         { 75, 120, 10, 20,
  63           5, 9, 4, 7,
  64           5, 80, 1, 8,
  65           1400000, 2800000, 200000, 96000,
  66           10, 5 }  //I9xx
  67 };
  68
  69 int
  70 intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
  71 {
  72         u32 tmp;
  73         if (!pdev || !dinfo)
  74                 return 1;
  75
  76         switch (pdev->device) {
  77         case PCI_DEVICE_ID_INTEL_830M:
  78                 dinfo->name = "Intel(R) 830M";
  79                 dinfo->chipset = INTEL_830M;
  80                 dinfo->mobile = 1;
  81                 dinfo->pll_index = PLLS_I8xx;
  82                 return 0;
  83         case PCI_DEVICE_ID_INTEL_845G:
  84                 dinfo->name = "Intel(R) 845G";
  85                 dinfo->chipset = INTEL_845G;
  86                 dinfo->mobile = 0;
  87                 dinfo->pll_index = PLLS_I8xx;
  88                 return 0;
  89         case PCI_DEVICE_ID_INTEL_85XGM:
  90                 tmp = 0;
  91                 dinfo->mobile = 1;
  92                 dinfo->pll_index = PLLS_I8xx;
  93                 pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
  94                 switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
  95                         INTEL_85X_VARIANT_MASK) {
  96                 case INTEL_VAR_855GME:
  97                         dinfo->name = "Intel(R) 855GME";
  98                         dinfo->chipset = INTEL_855GME;
  99                         return 0;
 100                 case INTEL_VAR_855GM:
 101                         dinfo->name = "Intel(R) 855GM";
 102                         dinfo->chipset = INTEL_855GM;
 103                         return 0;
 104                 case INTEL_VAR_852GME:
 105                         dinfo->name = "Intel(R) 852GME";
 106                         dinfo->chipset = INTEL_852GME;
 107                         return 0;
 108                 case INTEL_VAR_852GM:
 109                         dinfo->name = "Intel(R) 852GM";
 110                         dinfo->chipset = INTEL_852GM;
 111                         return 0;
 112                 default:
 113                         dinfo->name = "Intel(R) 852GM/855GM";
 114                         dinfo->chipset = INTEL_85XGM;
 115                         return 0;
 116                 }
 117                 break;
 118         case PCI_DEVICE_ID_INTEL_865G:
 119                 dinfo->name = "Intel(R) 865G";
 120                 dinfo->chipset = INTEL_865G;
 121                 dinfo->mobile = 0;
 122                 dinfo->pll_index = PLLS_I8xx;
 123                 return 0;
 124         case PCI_DEVICE_ID_INTEL_915G:
 125                 dinfo->name = "Intel(R) 915G";
 126                 dinfo->chipset = INTEL_915G;
 127                 dinfo->mobile = 0;
 128                 dinfo->pll_index = PLLS_I9xx;
 129                 return 0;
 130         case PCI_DEVICE_ID_INTEL_915GM:
 131                 dinfo->name = "Intel(R) 915GM";
 132                 dinfo->chipset = INTEL_915GM;
 133                 dinfo->mobile = 1;
 134                 dinfo->pll_index = PLLS_I9xx;
 135                 return 0;
 136         case PCI_DEVICE_ID_INTEL_945G:
 137                 dinfo->name = "Intel(R) 945G";
 138                 dinfo->chipset = INTEL_945G;
 139                 dinfo->mobile = 0;
 140                 dinfo->pll_index = PLLS_I9xx;
 141                 return 0;
 142         case PCI_DEVICE_ID_INTEL_945GM:
 143                 dinfo->name = "Intel(R) 945GM";
 144                 dinfo->chipset = INTEL_945GM;
 145                 dinfo->mobile = 1;
 146                 dinfo->pll_index = PLLS_I9xx;
 147                 return 0;
 148         default:
 149                 return 1;
 150         }
 151 }
 152
 153 int
 154 intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 155                      int *stolen_size)
 156 {
 157         struct pci_dev *bridge_dev;
 158         u16 tmp;
 159         int stolen_overhead;
 160
 161         if (!pdev || !aperture_size || !stolen_size)
 162                 return 1;
 163
 164         /* Find the bridge device.  It is always 0:0.0 */
 165         if (!(bridge_dev = pci_find_slot(0, PCI_DEVFN(0, 0)))) {
 166                 ERR_MSG("cannot find bridge device\n");
 167                 return 1;
 168         }
 169
 170         /* Get the fb aperture size and "stolen" memory amount. */
 171         tmp = 0;
 172         pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
 173         switch (pdev->device) {
 174         case PCI_DEVICE_ID_INTEL_915G:
 175         case PCI_DEVICE_ID_INTEL_915GM:
 176         case PCI_DEVICE_ID_INTEL_945G:
 177         case PCI_DEVICE_ID_INTEL_945GM:
 178                 /* 915 and 945 chipsets support a 256MB aperture.
 179                    Aperture size is determined by inspected the
 180                    base address of the aperture. */
 181                 if (pci_resource_start(pdev, 2) & 0x08000000)
 182                         *aperture_size = MB(128);
 183                 else
 184                         *aperture_size = MB(256);
 185                 break;
 186         default:
 187                 if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
 188                         *aperture_size = MB(64);
 189                 else
 190                         *aperture_size = MB(128);
 191                 break;
 192         }
 193
 194         /* Stolen memory size is reduced by the GTT and the popup.
 195            GTT is 1K per MB of aperture size, and popup is 4K. */
 196         stolen_overhead = (*aperture_size / MB(1)) + 4;
 197         switch(pdev->device) {
 198         case PCI_DEVICE_ID_INTEL_830M:
 199         case PCI_DEVICE_ID_INTEL_845G:
 200                 switch (tmp & INTEL_830_GMCH_GMS_MASK) {
 201                 case INTEL_830_GMCH_GMS_STOLEN_512:
 202                         *stolen_size = KB(512) - KB(stolen_overhead);
 203                         return 0;
 204                 case INTEL_830_GMCH_GMS_STOLEN_1024:
 205                         *stolen_size = MB(1) - KB(stolen_overhead);
 206                         return 0;
 207                 case INTEL_830_GMCH_GMS_STOLEN_8192:
 208                         *stolen_size = MB(8) - KB(stolen_overhead);
 209                         return 0;
 210                 case INTEL_830_GMCH_GMS_LOCAL:
 211                         ERR_MSG("only local memory found\n");
 212                         return 1;
 213                 case INTEL_830_GMCH_GMS_DISABLED:
 214                         ERR_MSG("video memory is disabled\n");
 215                         return 1;
 216                 default:
 217                         ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
 218                                 tmp & INTEL_830_GMCH_GMS_MASK);
 219                         return 1;
 220                 }
 221                 break;
 222         default:
 223                 switch (tmp & INTEL_855_GMCH_GMS_MASK) {
 224                 case INTEL_855_GMCH_GMS_STOLEN_1M:
 225                         *stolen_size = MB(1) - KB(stolen_overhead);
 226                         return 0;
 227                 case INTEL_855_GMCH_GMS_STOLEN_4M:
 228                         *stolen_size = MB(4) - KB(stolen_overhead);
 229                         return 0;
 230                 case INTEL_855_GMCH_GMS_STOLEN_8M:
 231                         *stolen_size = MB(8) - KB(stolen_overhead);
 232                         return 0;
 233                 case INTEL_855_GMCH_GMS_STOLEN_16M:
 234                         *stolen_size = MB(16) - KB(stolen_overhead);
 235                         return 0;
 236                 case INTEL_855_GMCH_GMS_STOLEN_32M:
 237                         *stolen_size = MB(32) - KB(stolen_overhead);
 238                         return 0;
 239                 case INTEL_915G_GMCH_GMS_STOLEN_48M:
 240                         *stolen_size = MB(48) - KB(stolen_overhead);
 241                         return 0;
 242                 case INTEL_915G_GMCH_GMS_STOLEN_64M:
 243                         *stolen_size = MB(64) - KB(stolen_overhead);
 244                         return 0;
 245                 case INTEL_855_GMCH_GMS_DISABLED:
 246                         ERR_MSG("video memory is disabled\n");
 247                         return 0;
 248                 default:
 249                         ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
 250                                 tmp & INTEL_855_GMCH_GMS_MASK);
 251                         return 1;
 252                 }
 253         }
 254 }
 255
 256 int
 257 intelfbhw_check_non_crt(struct intelfb_info *dinfo)
 258 {
 259         int dvo = 0;
 260
 261         if (INREG(LVDS) & PORT_ENABLE)
 262                 dvo |= LVDS_PORT;
 263         if (INREG(DVOA) & PORT_ENABLE)
 264                 dvo |= DVOA_PORT;
 265         if (INREG(DVOB) & PORT_ENABLE)
 266                 dvo |= DVOB_PORT;
 267         if (INREG(DVOC) & PORT_ENABLE)
 268                 dvo |= DVOC_PORT;
 269
 270         return dvo;
 271 }
 272
 273 const char *
 274 intelfbhw_dvo_to_string(int dvo)
 275 {
 276         if (dvo & DVOA_PORT)
 277                 return "DVO port A";
 278         else if (dvo & DVOB_PORT)
 279                 return "DVO port B";
 280         else if (dvo & DVOC_PORT)
 281                 return "DVO port C";
 282         else if (dvo & LVDS_PORT)
 283                 return "LVDS port";
 284         else
 285                 return NULL;
 286 }
 287
 288
 289 int
 290 intelfbhw_validate_mode(struct intelfb_info *dinfo,
 291                         struct fb_var_screeninfo *var)
 292 {
 293         int bytes_per_pixel;
 294         int tmp;
 295
 296 #if VERBOSE > 0
 297         DBG_MSG("intelfbhw_validate_mode\n");
 298 #endif
 299
 300         bytes_per_pixel = var->bits_per_pixel / 8;
 301         if (bytes_per_pixel == 3)
 302                 bytes_per_pixel = 4;
 303
 304         /* Check if enough video memory. */
 305         tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
 306         if (tmp > dinfo->fb.size) {
 307                 WRN_MSG("Not enough video ram for mode "
 308                         "(%d KByte vs %d KByte).\n",
 309                         BtoKB(tmp), BtoKB(dinfo->fb.size));
 310                 return 1;
 311         }
 312
 313         /* Check if x/y limits are OK. */
 314         if (var->xres - 1 > HACTIVE_MASK) {
 315                 WRN_MSG("X resolution too large (%d vs %d).\n",
 316                         var->xres, HACTIVE_MASK + 1);
 317                 return 1;
 318         }
 319         if (var->yres - 1 > VACTIVE_MASK) {
 320                 WRN_MSG("Y resolution too large (%d vs %d).\n",
 321                         var->yres, VACTIVE_MASK + 1);
 322                 return 1;
 323         }
 324
 325         /* Check for interlaced/doublescan modes. */
 326         if (var->vmode & FB_VMODE_INTERLACED) {
 327                 WRN_MSG("Mode is interlaced.\n");
 328                 return 1;
 329         }
 330         if (var->vmode & FB_VMODE_DOUBLE) {
 331                 WRN_MSG("Mode is double-scan.\n");
 332                 return 1;
 333         }
 334
 335         /* Check if clock is OK. */
 336         tmp = 1000000000 / var->pixclock;
 337         if (tmp < MIN_CLOCK) {
 338                 WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
 339                         (tmp + 500) / 1000, MIN_CLOCK / 1000);
 340                 return 1;
 341         }
 342         if (tmp > MAX_CLOCK) {
 343                 WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
 344                         (tmp + 500) / 1000, MAX_CLOCK / 1000);
 345                 return 1;
 346         }
 347
 348         return 0;
 349 }
 350
 351 int
 352 intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 353 {
 354         struct intelfb_info *dinfo = GET_DINFO(info);
 355         u32 offset, xoffset, yoffset;
 356
 357 #if VERBOSE > 0
 358         DBG_MSG("intelfbhw_pan_display\n");
 359 #endif
 360
 361         xoffset = ROUND_DOWN_TO(var->xoffset, 8);
 362         yoffset = var->yoffset;
 363
 364         if ((xoffset + var->xres > var->xres_virtual) ||
 365             (yoffset + var->yres > var->yres_virtual))
 366                 return -EINVAL;
 367
 368         offset = (yoffset * dinfo->pitch) +
 369                  (xoffset * var->bits_per_pixel) / 8;
 370
 371         offset += dinfo->fb.offset << 12;
 372
 373         OUTREG(DSPABASE, offset);
 374
 375         return 0;
 376 }
 377
 378 /* Blank the screen. */
 379 void
 380 intelfbhw_do_blank(int blank, struct fb_info *info)
 381 {
 382         struct intelfb_info *dinfo = GET_DINFO(info);
 383         u32 tmp;
 384
 385 #if VERBOSE > 0
 386         DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
 387 #endif
 388
 389         /* Turn plane A on or off */
 390         tmp = INREG(DSPACNTR);
 391         if (blank)
 392                 tmp &= ~DISPPLANE_PLANE_ENABLE;
 393         else
 394                 tmp |= DISPPLANE_PLANE_ENABLE;
 395         OUTREG(DSPACNTR, tmp);
 396         /* Flush */
 397         tmp = INREG(DSPABASE);
 398         OUTREG(DSPABASE, tmp);
 399
 400         /* Turn off/on the HW cursor */
 401 #if VERBOSE > 0
 402         DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
 403 #endif
 404         if (dinfo->cursor_on) {
 405                 if (blank) {
 406                         intelfbhw_cursor_hide(dinfo);
 407                 } else {
 408                         intelfbhw_cursor_show(dinfo);
 409                 }
 410                 dinfo->cursor_on = 1;
 411         }
 412         dinfo->cursor_blanked = blank;
 413
 414         /* Set DPMS level */
 415         tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
 416         switch (blank) {
 417         case FB_BLANK_UNBLANK:
 418         case FB_BLANK_NORMAL:
 419                 tmp |= ADPA_DPMS_D0;
 420                 break;
 421         case FB_BLANK_VSYNC_SUSPEND:
 422                 tmp |= ADPA_DPMS_D1;
 423                 break;
 424         case FB_BLANK_HSYNC_SUSPEND:
 425                 tmp |= ADPA_DPMS_D2;
 426                 break;
 427         case FB_BLANK_POWERDOWN:
 428                 tmp |= ADPA_DPMS_D3;
 429                 break;
 430         }
 431         OUTREG(ADPA, tmp);
 432
 433         return;
 434 }
 435
 436
 437 void
 438 intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
 439                     unsigned red, unsigned green, unsigned blue,
 440                     unsigned transp)
 441 {
 442 #if VERBOSE > 0
 443         DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
 444                 regno, red, green, blue);
 445 #endif
 446
 447         u32 palette_reg = (dinfo->pipe == PIPE_A) ?
 448                           PALETTE_A : PALETTE_B;
 449
 450         OUTREG(palette_reg + (regno << 2),
 451                (red << PALETTE_8_RED_SHIFT) |
 452                (green << PALETTE_8_GREEN_SHIFT) |
 453                (blue << PALETTE_8_BLUE_SHIFT));
 454 }
 455
 456
 457 int
 458 intelfbhw_read_hw_state(struct intelfb_info *dinfo, struct intelfb_hwstate *hw,
 459                         int flag)
 460 {
 461         int i;
 462
 463 #if VERBOSE > 0
 464         DBG_MSG("intelfbhw_read_hw_state\n");
 465 #endif
 466
 467         if (!hw || !dinfo)
 468                 return -1;
 469
 470         /* Read in as much of the HW state as possible. */
 471         hw->vga0_divisor = INREG(VGA0_DIVISOR);
 472         hw->vga1_divisor = INREG(VGA1_DIVISOR);
 473         hw->vga_pd = INREG(VGAPD);
 474         hw->dpll_a = INREG(DPLL_A);
 475         hw->dpll_b = INREG(DPLL_B);
 476         hw->fpa0 = INREG(FPA0);
 477         hw->fpa1 = INREG(FPA1);
 478         hw->fpb0 = INREG(FPB0);
 479         hw->fpb1 = INREG(FPB1);
 480
 481         if (flag == 1)
 482                 return flag;
 483
 484 #if 0
 485         /* This seems to be a problem with the 852GM/855GM */
 486         for (i = 0; i < PALETTE_8_ENTRIES; i++) {
 487                 hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
 488                 hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
 489         }
 490 #endif
 491
 492         if (flag == 2)
 493                 return flag;
 494
 495         hw->htotal_a = INREG(HTOTAL_A);
 496         hw->hblank_a = INREG(HBLANK_A);
 497         hw->hsync_a = INREG(HSYNC_A);
 498         hw->vtotal_a = INREG(VTOTAL_A);
 499         hw->vblank_a = INREG(VBLANK_A);
 500         hw->vsync_a = INREG(VSYNC_A);
 501         hw->src_size_a = INREG(SRC_SIZE_A);
 502         hw->bclrpat_a = INREG(BCLRPAT_A);
 503         hw->htotal_b = INREG(HTOTAL_B);
 504         hw->hblank_b = INREG(HBLANK_B);
 505         hw->hsync_b = INREG(HSYNC_B);
 506         hw->vtotal_b = INREG(VTOTAL_B);
 507         hw->vblank_b = INREG(VBLANK_B);
 508         hw->vsync_b = INREG(VSYNC_B);
 509         hw->src_size_b = INREG(SRC_SIZE_B);
 510         hw->bclrpat_b = INREG(BCLRPAT_B);
 511
 512         if (flag == 3)
 513                 return flag;
 514
 515         hw->adpa = INREG(ADPA);
 516         hw->dvoa = INREG(DVOA);
 517         hw->dvob = INREG(DVOB);
 518         hw->dvoc = INREG(DVOC);
 519         hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
 520         hw->dvob_srcdim = INREG(DVOB_SRCDIM);
 521         hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
 522         hw->lvds = INREG(LVDS);
 523
 524         if (flag == 4)
 525                 return flag;
 526
 527         hw->pipe_a_conf = INREG(PIPEACONF);
 528         hw->pipe_b_conf = INREG(PIPEBCONF);
 529         hw->disp_arb = INREG(DISPARB);
 530
 531         if (flag == 5)
 532                 return flag;
 533
 534         hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
 535         hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
 536         hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
 537         hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
 538
 539         if (flag == 6)
 540                 return flag;
 541
 542         for (i = 0; i < 4; i++) {
 543                 hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
 544                 hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
 545         }
 546
 547         if (flag == 7)
 548                 return flag;
 549
 550         hw->cursor_size = INREG(CURSOR_SIZE);
 551
 552         if (flag == 8)
 553                 return flag;
 554
 555         hw->disp_a_ctrl = INREG(DSPACNTR);
 556         hw->disp_b_ctrl = INREG(DSPBCNTR);
 557         hw->disp_a_base = INREG(DSPABASE);
 558         hw->disp_b_base = INREG(DSPBBASE);
 559         hw->disp_a_stride = INREG(DSPASTRIDE);
 560         hw->disp_b_stride = INREG(DSPBSTRIDE);
 561
 562         if (flag == 9)
 563                 return flag;
 564
 565         hw->vgacntrl = INREG(VGACNTRL);
 566
 567         if (flag == 10)
 568                 return flag;
 569
 570         hw->add_id = INREG(ADD_ID);
 571
 572         if (flag == 11)
 573                 return flag;
 574
 575         for (i = 0; i < 7; i++) {
 576                 hw->swf0x[i] = INREG(SWF00 + (i << 2));
 577                 hw->swf1x[i] = INREG(SWF10 + (i << 2));
 578                 if (i < 3)
 579                         hw->swf3x[i] = INREG(SWF30 + (i << 2));
 580         }
 581
 582         for (i = 0; i < 8; i++)
 583                 hw->fence[i] = INREG(FENCE + (i << 2));
 584
 585         hw->instpm = INREG(INSTPM);
 586         hw->mem_mode = INREG(MEM_MODE);
 587         hw->fw_blc_0 = INREG(FW_BLC_0);
 588         hw->fw_blc_1 = INREG(FW_BLC_1);
 589
 590         return 0;
 591 }
 592
 593
 594 static int calc_vclock3(int index, int m, int n, int p)
 595 {
 596         if (p == 0 || n == 0)
 597                 return 0;
 598         return plls[index].ref_clk * m / n / p;
 599 }
 600
 601 static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2, int lvds)
 602 {
 603         struct pll_min_max *pll = &plls[index];
 604         u32 m, vco, p;
 605
 606         m = (5 * (m1 + 2)) + (m2 + 2);
 607         n += 2;
 608         vco = pll->ref_clk * m / n;
 609
 610         if (index == PLLS_I8xx) {
 611                 p = ((p1 + 2) * (1 << (p2 + 1)));
 612         } else {
 613                 p = ((p1) * (p2 ? 5 : 10));
 614         }
 615         return vco / p;
 616 }
 617
 618 static void
 619 intelfbhw_get_p1p2(struct intelfb_info *dinfo, int dpll, int *o_p1, int *o_p2)
 620 {
 621         int p1, p2;
 622
 623         if (IS_I9XX(dinfo)) {
 624                 if (dpll & DPLL_P1_FORCE_DIV2)
 625                         p1 = 1;
 626                 else
 627                         p1 = (dpll >> DPLL_P1_SHIFT) & 0xff;
 628
 629                 p1 = ffs(p1);
 630
 631                 p2 = (dpll >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
 632         } else {
 633                 if (dpll & DPLL_P1_FORCE_DIV2)
 634                         p1 = 0;
 635                 else
 636                         p1 = (dpll >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
 637                 p2 = (dpll >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
 638         }
 639
 640         *o_p1 = p1;
 641         *o_p2 = p2;
 642 }
 643
 644
 645 void
 646 intelfbhw_print_hw_state(struct intelfb_info *dinfo, struct intelfb_hwstate *hw)
 647 {
 648 #if REGDUMP
 649         int i, m1, m2, n, p1, p2;
 650         int index = dinfo->pll_index;
 651         DBG_MSG("intelfbhw_print_hw_state\n");
 652
 653         if (!hw || !dinfo)
 654                 return;
 655         /* Read in as much of the HW state as possible. */
 656         printk("hw state dump start\n");
 657         printk("        VGA0_DIVISOR:           0x%08x\n", hw->vga0_divisor);
 658         printk("        VGA1_DIVISOR:           0x%08x\n", hw->vga1_divisor);
 659         printk("        VGAPD:                  0x%08x\n", hw->vga_pd);
 660         n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 661         m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 662         m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 663
 664         intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
 665
 666         printk("        VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 667                m1, m2, n, p1, p2);
 668         printk("        VGA0: clock is %d\n",
 669                calc_vclock(index, m1, m2, n, p1, p2, 0));
 670
 671         n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 672         m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 673         m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 674
 675         intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
 676         printk("        VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 677                m1, m2, n, p1, p2);
 678         printk("        VGA1: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
 679
 680         printk("        DPLL_A:                 0x%08x\n", hw->dpll_a);
 681         printk("        DPLL_B:                 0x%08x\n", hw->dpll_b);
 682         printk("        FPA0:                   0x%08x\n", hw->fpa0);
 683         printk("        FPA1:                   0x%08x\n", hw->fpa1);
 684         printk("        FPB0:                   0x%08x\n", hw->fpb0);
 685         printk("        FPB1:                   0x%08x\n", hw->fpb1);
 686
 687         n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 688         m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 689         m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 690
 691         intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
 692
 693         printk("        PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 694                m1, m2, n, p1, p2);
 695         printk("        PLLA0: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
 696
 697         n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 698         m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 699         m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 700
 701         intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
 702
 703         printk("        PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 704                m1, m2, n, p1, p2);
 705         printk("        PLLA1: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
 706
 707 #if 0
 708         printk("        PALETTE_A:\n");
 709         for (i = 0; i < PALETTE_8_ENTRIES)
 710                 printk("        %3d:    0x%08x\n", i, hw->palette_a[i]);
 711         printk("        PALETTE_B:\n");
 712         for (i = 0; i < PALETTE_8_ENTRIES)
 713                 printk("        %3d:    0x%08x\n", i, hw->palette_b[i]);
 714 #endif
 715
 716         printk("        HTOTAL_A:               0x%08x\n", hw->htotal_a);
 717         printk("        HBLANK_A:               0x%08x\n", hw->hblank_a);
 718         printk("        HSYNC_A:                0x%08x\n", hw->hsync_a);
 719         printk("        VTOTAL_A:               0x%08x\n", hw->vtotal_a);
 720         printk("        VBLANK_A:               0x%08x\n", hw->vblank_a);
 721         printk("        VSYNC_A:                0x%08x\n", hw->vsync_a);
 722         printk("        SRC_SIZE_A:             0x%08x\n", hw->src_size_a);
 723         printk("        BCLRPAT_A:              0x%08x\n", hw->bclrpat_a);
 724         printk("        HTOTAL_B:               0x%08x\n", hw->htotal_b);
 725         printk("        HBLANK_B:               0x%08x\n", hw->hblank_b);
 726         printk("        HSYNC_B:                0x%08x\n", hw->hsync_b);
 727         printk("        VTOTAL_B:               0x%08x\n", hw->vtotal_b);
 728         printk("        VBLANK_B:               0x%08x\n", hw->vblank_b);
 729         printk("        VSYNC_B:                0x%08x\n", hw->vsync_b);
 730         printk("        SRC_SIZE_B:             0x%08x\n", hw->src_size_b);
 731         printk("        BCLRPAT_B:              0x%08x\n", hw->bclrpat_b);
 732
 733         printk("        ADPA:                   0x%08x\n", hw->adpa);
 734         printk("        DVOA:                   0x%08x\n", hw->dvoa);
 735         printk("        DVOB:                   0x%08x\n", hw->dvob);
 736         printk("        DVOC:                   0x%08x\n", hw->dvoc);
 737         printk("        DVOA_SRCDIM:            0x%08x\n", hw->dvoa_srcdim);
 738         printk("        DVOB_SRCDIM:            0x%08x\n", hw->dvob_srcdim);
 739         printk("        DVOC_SRCDIM:            0x%08x\n", hw->dvoc_srcdim);
 740         printk("        LVDS:                   0x%08x\n", hw->lvds);
 741
 742         printk("        PIPEACONF:              0x%08x\n", hw->pipe_a_conf);
 743         printk("        PIPEBCONF:              0x%08x\n", hw->pipe_b_conf);
 744         printk("        DISPARB:                0x%08x\n", hw->disp_arb);
 745
 746         printk("        CURSOR_A_CONTROL:       0x%08x\n", hw->cursor_a_control);
 747         printk("        CURSOR_B_CONTROL:       0x%08x\n", hw->cursor_b_control);
 748         printk("        CURSOR_A_BASEADDR:      0x%08x\n", hw->cursor_a_base);
 749         printk("        CURSOR_B_BASEADDR:      0x%08x\n", hw->cursor_b_base);
 750
 751         printk("        CURSOR_A_PALETTE:       ");
 752         for (i = 0; i < 4; i++) {
 753                 printk("0x%08x", hw->cursor_a_palette[i]);
 754                 if (i < 3)
 755                         printk(", ");
 756         }
 757         printk("\n");
 758         printk("        CURSOR_B_PALETTE:       ");
 759         for (i = 0; i < 4; i++) {
 760                 printk("0x%08x", hw->cursor_b_palette[i]);
 761                 if (i < 3)
 762                         printk(", ");
 763         }
 764         printk("\n");
 765
 766         printk("        CURSOR_SIZE:            0x%08x\n", hw->cursor_size);
 767
 768         printk("        DSPACNTR:               0x%08x\n", hw->disp_a_ctrl);
 769         printk("        DSPBCNTR:               0x%08x\n", hw->disp_b_ctrl);
 770         printk("        DSPABASE:               0x%08x\n", hw->disp_a_base);
 771         printk("        DSPBBASE:               0x%08x\n", hw->disp_b_base);
 772         printk("        DSPASTRIDE:             0x%08x\n", hw->disp_a_stride);
 773         printk("        DSPBSTRIDE:             0x%08x\n", hw->disp_b_stride);
 774
 775         printk("        VGACNTRL:               0x%08x\n", hw->vgacntrl);
 776         printk("        ADD_ID:                 0x%08x\n", hw->add_id);
 777
 778         for (i = 0; i < 7; i++) {
 779                 printk("        SWF0%d                  0x%08x\n", i,
 780                         hw->swf0x[i]);
 781         }
 782         for (i = 0; i < 7; i++) {
 783                 printk("        SWF1%d                  0x%08x\n", i,
 784                         hw->swf1x[i]);
 785         }
 786         for (i = 0; i < 3; i++) {
 787                 printk("        SWF3%d                  0x%08x\n", i,
 788                        hw->swf3x[i]);
 789         }
 790         for (i = 0; i < 8; i++)
 791                 printk("        FENCE%d                 0x%08x\n", i,
 792                        hw->fence[i]);
 793
 794         printk("        INSTPM                  0x%08x\n", hw->instpm);
 795         printk("        MEM_MODE                0x%08x\n", hw->mem_mode);
 796         printk("        FW_BLC_0                0x%08x\n", hw->fw_blc_0);
 797         printk("        FW_BLC_1                0x%08x\n", hw->fw_blc_1);
 798
 799         printk("hw state dump end\n");
 800 #endif
 801 }
 802
 803
 804
 805 /* Split the M parameter into M1 and M2. */
 806 static int
 807 splitm(int index, unsigned int m, unsigned int *retm1, unsigned int *retm2)
 808 {
 809         int m1, m2;
 810         int testm;
 811         struct pll_min_max *pll = &plls[index];
 812
 813         /* no point optimising too much - brute force m */
 814         for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
 815                 for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
 816                         testm = (5 * (m1 + 2)) + (m2 + 2);
 817                         if (testm == m) {
 818                                 *retm1 = (unsigned int)m1;
 819                                 *retm2 = (unsigned int)m2;
 820                                 return 0;
 821                         }
 822                 }
 823         }
 824         return 1;
 825 }
 826
 827 /* Split the P parameter into P1 and P2. */
 828 static int
 829 splitp(int index, unsigned int p, unsigned int *retp1, unsigned int *retp2)
 830 {
 831         int p1, p2;
 832         struct pll_min_max *pll = &plls[index];
 833
 834         if (index == PLLS_I9xx) {
 835                 p2 = (p % 10) ? 1 : 0;
 836
 837                 p1 = p / (p2 ? 5 : 10);
 838
 839                 *retp1 = (unsigned int)p1;
 840                 *retp2 = (unsigned int)p2;
 841                 return 0;
 842         }
 843
 844         if (p % 4 == 0)
 845                 p2 = 1;
 846         else
 847                 p2 = 0;
 848         p1 = (p / (1 << (p2 + 1))) - 2;
 849         if (p % 4 == 0 && p1 < pll->min_p1) {
 850                 p2 = 0;
 851                 p1 = (p / (1 << (p2 + 1))) - 2;
 852         }
 853         if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
 854             (p1 + 2) * (1 << (p2 + 1)) != p) {
 855                 return 1;
 856         } else {
 857                 *retp1 = (unsigned int)p1;
 858                 *retp2 = (unsigned int)p2;
 859                 return 0;
 860         }
 861 }
 862
 863 static int
 864 calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2, u32 *retn, u32 *retp1,
 865                 u32 *retp2, u32 *retclock)
 866 {
 867         u32 m1, m2, n, p1, p2, n1, testm;
 868         u32 f_vco, p, p_best = 0, m, f_out = 0;
 869         u32 err_max, err_target, err_best = 10000000;
 870         u32 n_best = 0, m_best = 0, f_best, f_err;
 871         u32 p_min, p_max, p_inc, div_max;
 872         struct pll_min_max *pll = &plls[index];
 873
 874         /* Accept 0.5% difference, but aim for 0.1% */
 875         err_max = 5 * clock / 1000;
 876         err_target = clock / 1000;
 877
 878         DBG_MSG("Clock is %d\n", clock);
 879
 880         div_max = pll->max_vco / clock;
 881
 882         p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
 883         p_min = p_inc;
 884         p_max = ROUND_DOWN_TO(div_max, p_inc);
 885         if (p_min < pll->min_p)
 886                 p_min = pll->min_p;
 887         if (p_max > pll->max_p)
 888                 p_max = pll->max_p;
 889
 890         DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
 891
 892         p = p_min;
 893         do {
 894                 if (splitp(index, p, &p1, &p2)) {
 895                         WRN_MSG("cannot split p = %d\n", p);
 896                         p += p_inc;
 897                         continue;
 898                 }
 899                 n = pll->min_n;
 900                 f_vco = clock * p;
 901
 902                 do {
 903                         m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
 904                         if (m < pll->min_m)
 905                                 m = pll->min_m + 1;
 906                         if (m > pll->max_m)
 907                                 m = pll->max_m - 1;
 908                         for (testm = m - 1; testm <= m; testm++) {
 909                                 f_out = calc_vclock3(index, m, n, p);
 910                                 if (splitm(index, testm, &m1, &m2)) {
 911                                         WRN_MSG("cannot split m = %d\n", m);
 912                                         n++;
 913                                         continue;
 914                                 }
 915                                 if (clock > f_out)
 916                                         f_err = clock - f_out;
 917                                 else/* slightly bias the error for bigger clocks */
 918                                         f_err = f_out - clock + 1;
 919
 920                                 if (f_err < err_best) {
 921                                         m_best = testm;
 922                                         n_best = n;
 923                                         p_best = p;
 924                                         f_best = f_out;
 925                                         err_best = f_err;
 926                                 }
 927                         }
 928                         n++;
 929                 } while ((n <= pll->max_n) && (f_out >= clock));
 930                 p += p_inc;
 931         } while ((p <= p_max));
 932
 933         if (!m_best) {
 934                 WRN_MSG("cannot find parameters for clock %d\n", clock);
 935                 return 1;
 936         }
 937         m = m_best;
 938         n = n_best;
 939         p = p_best;
 940         splitm(index, m, &m1, &m2);
 941         splitp(index, p, &p1, &p2);
 942         n1 = n - 2;
 943
 944         DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
 945                 "f: %d (%d), VCO: %d\n",
 946                 m, m1, m2, n, n1, p, p1, p2,
 947                 calc_vclock3(index, m, n, p),
 948                 calc_vclock(index, m1, m2, n1, p1, p2, 0),
 949                 calc_vclock3(index, m, n, p) * p);
 950         *retm1 = m1;
 951         *retm2 = m2;
 952         *retn = n1;
 953         *retp1 = p1;
 954         *retp2 = p2;
 955         *retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
 956
 957         return 0;
 958 }
 959
 960 static __inline__ int
 961 check_overflow(u32 value, u32 limit, const char *description)
 962 {
 963         if (value > limit) {
 964                 WRN_MSG("%s value %d exceeds limit %d\n",
 965                         description, value, limit);
 966                 return 1;
 967         }
 968         return 0;
 969 }
 970
 971 /* It is assumed that hw is filled in with the initial state information. */
 972 int
 973 intelfbhw_mode_to_hw(struct intelfb_info *dinfo, struct intelfb_hwstate *hw,
 974                      struct fb_var_screeninfo *var)
 975 {
 976         int pipe = PIPE_A;
 977         u32 *dpll, *fp0, *fp1;
 978         u32 m1, m2, n, p1, p2, clock_target, clock;
 979         u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
 980         u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
 981         u32 vsync_pol, hsync_pol;
 982         u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
 983         u32 stride_alignment;
 984
 985         DBG_MSG("intelfbhw_mode_to_hw\n");
 986
 987         /* Disable VGA */
 988         hw->vgacntrl |= VGA_DISABLE;
 989
 990         /* Check whether pipe A or pipe B is enabled. */
 991         if (hw->pipe_a_conf & PIPECONF_ENABLE)
 992                 pipe = PIPE_A;
 993         else if (hw->pipe_b_conf & PIPECONF_ENABLE)
 994                 pipe = PIPE_B;
 995
 996         /* Set which pipe's registers will be set. */
 997         if (pipe == PIPE_B) {
 998                 dpll = &hw->dpll_b;
 999                 fp0 = &hw->fpb0;
1000                 fp1 = &hw->fpb1;
1001                 hs = &hw->hsync_b;
1002                 hb = &hw->hblank_b;
1003                 ht = &hw->htotal_b;
1004                 vs = &hw->vsync_b;
1005                 vb = &hw->vblank_b;
1006                 vt = &hw->vtotal_b;
1007                 ss = &hw->src_size_b;
1008                 pipe_conf = &hw->pipe_b_conf;
1009         } else {
1010                 dpll = &hw->dpll_a;
1011                 fp0 = &hw->fpa0;
1012                 fp1 = &hw->fpa1;
1013                 hs = &hw->hsync_a;
1014                 hb = &hw->hblank_a;
1015                 ht = &hw->htotal_a;
1016                 vs = &hw->vsync_a;
1017                 vb = &hw->vblank_a;
1018                 vt = &hw->vtotal_a;
1019                 ss = &hw->src_size_a;
1020                 pipe_conf = &hw->pipe_a_conf;
1021         }
1022
1023         /* Use ADPA register for sync control. */
1024         hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
1025
1026         /* sync polarity */
1027         hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
1028                         ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
1029         vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
1030                         ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
1031         hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
1032                       (ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
1033         hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
1034                     (vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
1035
1036         /* Connect correct pipe to the analog port DAC */
1037         hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
1038         hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
1039
1040         /* Set DPMS state to D0 (on) */
1041         hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
1042         hw->adpa |= ADPA_DPMS_D0;
1043
1044         hw->adpa |= ADPA_DAC_ENABLE;
1045
1046         *dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
1047         *dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
1048         *dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
1049
1050         /* Desired clock in kHz */
1051         clock_target = 1000000000 / var->pixclock;
1052
1053         if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
1054                             &n, &p1, &p2, &clock)) {
1055                 WRN_MSG("calc_pll_params failed\n");
1056                 return 1;
1057         }
1058
1059         /* Check for overflow. */
1060         if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
1061                 return 1;
1062         if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
1063                 return 1;
1064         if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
1065                 return 1;
1066         if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
1067                 return 1;
1068         if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
1069                 return 1;
1070
1071         *dpll &= ~DPLL_P1_FORCE_DIV2;
1072         *dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
1073                    (DPLL_P1_MASK << DPLL_P1_SHIFT));
1074
1075         if (IS_I9XX(dinfo)) {
1076                 *dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
1077                 *dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
1078         } else {
1079                 *dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
1080         }
1081
1082         *fp0 = (n << FP_N_DIVISOR_SHIFT) |
1083                (m1 << FP_M1_DIVISOR_SHIFT) |
1084                (m2 << FP_M2_DIVISOR_SHIFT);
1085         *fp1 = *fp0;
1086
1087         hw->dvob &= ~PORT_ENABLE;
1088         hw->dvoc &= ~PORT_ENABLE;
1089
1090         /* Use display plane A. */
1091         hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
1092         hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
1093         hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
1094         switch (intelfb_var_to_depth(var)) {
1095         case 8:
1096                 hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
1097                 break;
1098         case 15:
1099                 hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
1100                 break;
1101         case 16:
1102                 hw->disp_a_ctrl |= DISPPLANE_16BPP;
1103                 break;
1104         case 24:
1105                 hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
1106                 break;
1107         }
1108         hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
1109         hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
1110
1111         /* Set CRTC registers. */
1112         hactive = var->xres;
1113         hsync_start = hactive + var->right_margin;
1114         hsync_end = hsync_start + var->hsync_len;
1115         htotal = hsync_end + var->left_margin;
1116         hblank_start = hactive;
1117         hblank_end = htotal;
1118
1119         DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
1120                 hactive, hsync_start, hsync_end, htotal, hblank_start,
1121                 hblank_end);
1122
1123         vactive = var->yres;
1124         vsync_start = vactive + var->lower_margin;
1125         vsync_end = vsync_start + var->vsync_len;
1126         vtotal = vsync_end + var->upper_margin;
1127         vblank_start = vactive;
1128         vblank_end = vtotal;
1129         vblank_end = vsync_end + 1;
1130
1131         DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
1132                 vactive, vsync_start, vsync_end, vtotal, vblank_start,
1133                 vblank_end);
1134
1135         /* Adjust for register values, and check for overflow. */
1136         hactive--;
1137         if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
1138                 return 1;
1139         hsync_start--;
1140         if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
1141                 return 1;
1142         hsync_end--;
1143         if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
1144                 return 1;
1145         htotal--;
1146         if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
1147                 return 1;
1148         hblank_start--;
1149         if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
1150                 return 1;
1151         hblank_end--;
1152         if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
1153                 return 1;
1154
1155         vactive--;
1156         if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
1157                 return 1;
1158         vsync_start--;
1159         if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
1160                 return 1;
1161         vsync_end--;
1162         if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
1163                 return 1;
1164         vtotal--;
1165         if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
1166                 return 1;
1167         vblank_start--;
1168         if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
1169                 return 1;
1170         vblank_end--;
1171         if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
1172                 return 1;
1173
1174         *ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
1175         *hb = (hblank_start << HBLANKSTART_SHIFT) |
1176               (hblank_end << HSYNCEND_SHIFT);
1177         *hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
1178
1179         *vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
1180         *vb = (vblank_start << VBLANKSTART_SHIFT) |
1181               (vblank_end << VSYNCEND_SHIFT);
1182         *vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
1183         *ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
1184               (vactive << SRC_SIZE_VERT_SHIFT);
1185
1186         hw->disp_a_stride = dinfo->pitch;
1187         DBG_MSG("pitch is %d\n", hw->disp_a_stride);
1188
1189         hw->disp_a_base = hw->disp_a_stride * var->yoffset +
1190                           var->xoffset * var->bits_per_pixel / 8;
1191
1192         hw->disp_a_base += dinfo->fb.offset << 12;
1193
1194         /* Check stride alignment. */
1195         stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
1196                                             STRIDE_ALIGNMENT;
1197         if (hw->disp_a_stride % stride_alignment != 0) {
1198                 WRN_MSG("display stride %d has bad alignment %d\n",
1199                         hw->disp_a_stride, stride_alignment);
1200                 return 1;
1201         }
1202
1203         /* Set the palette to 8-bit mode. */
1204         *pipe_conf &= ~PIPECONF_GAMMA;
1205         return 0;
1206 }
1207
1208 /* Program a (non-VGA) video mode. */
1209 int
1210 intelfbhw_program_mode(struct intelfb_info *dinfo,
1211                      const struct intelfb_hwstate *hw, int blank)
1212 {
1213         int pipe = PIPE_A;
1214         u32 tmp;
1215         const u32 *dpll, *fp0, *fp1, *pipe_conf;
1216         const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
1217         u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg;
1218         u32 hsync_reg, htotal_reg, hblank_reg;
1219         u32 vsync_reg, vtotal_reg, vblank_reg;
1220         u32 src_size_reg;
1221         u32 count, tmp_val[3];
1222
1223         /* Assume single pipe, display plane A, analog CRT. */
1224
1225 #if VERBOSE > 0
1226         DBG_MSG("intelfbhw_program_mode\n");
1227 #endif
1228
1229         /* Disable VGA */
1230         tmp = INREG(VGACNTRL);
1231         tmp |= VGA_DISABLE;
1232         OUTREG(VGACNTRL, tmp);
1233
1234         /* Check whether pipe A or pipe B is enabled. */
1235         if (hw->pipe_a_conf & PIPECONF_ENABLE)
1236                 pipe = PIPE_A;
1237         else if (hw->pipe_b_conf & PIPECONF_ENABLE)
1238                 pipe = PIPE_B;
1239
1240         dinfo->pipe = pipe;
1241
1242         if (pipe == PIPE_B) {
1243                 dpll = &hw->dpll_b;
1244                 fp0 = &hw->fpb0;
1245                 fp1 = &hw->fpb1;
1246                 pipe_conf = &hw->pipe_b_conf;
1247                 hs = &hw->hsync_b;
1248                 hb = &hw->hblank_b;
1249                 ht = &hw->htotal_b;
1250                 vs = &hw->vsync_b;
1251                 vb = &hw->vblank_b;
1252                 vt = &hw->vtotal_b;
1253                 ss = &hw->src_size_b;
1254                 dpll_reg = DPLL_B;
1255                 fp0_reg = FPB0;
1256                 fp1_reg = FPB1;
1257                 pipe_conf_reg = PIPEBCONF;
1258                 hsync_reg = HSYNC_B;
1259                 htotal_reg = HTOTAL_B;
1260                 hblank_reg = HBLANK_B;
1261                 vsync_reg = VSYNC_B;
1262                 vtotal_reg = VTOTAL_B;
1263                 vblank_reg = VBLANK_B;
1264                 src_size_reg = SRC_SIZE_B;
1265         } else {
1266                 dpll = &hw->dpll_a;
1267                 fp0 = &hw->fpa0;
1268                 fp1 = &hw->fpa1;
1269                 pipe_conf = &hw->pipe_a_conf;
1270                 hs = &hw->hsync_a;
1271                 hb = &hw->hblank_a;
1272                 ht = &hw->htotal_a;
1273                 vs = &hw->vsync_a;
1274                 vb = &hw->vblank_a;
1275                 vt = &hw->vtotal_a;
1276                 ss = &hw->src_size_a;
1277                 dpll_reg = DPLL_A;
1278                 fp0_reg = FPA0;
1279                 fp1_reg = FPA1;
1280                 pipe_conf_reg = PIPEACONF;
1281                 hsync_reg = HSYNC_A;
1282                 htotal_reg = HTOTAL_A;
1283                 hblank_reg = HBLANK_A;
1284                 vsync_reg = VSYNC_A;
1285                 vtotal_reg = VTOTAL_A;
1286                 vblank_reg = VBLANK_A;
1287                 src_size_reg = SRC_SIZE_A;
1288         }
1289
1290         /* turn off pipe */
1291         tmp = INREG(pipe_conf_reg);
1292         tmp &= ~PIPECONF_ENABLE;
1293         OUTREG(pipe_conf_reg, tmp);
1294
1295         count = 0;
1296         do {
1297                 tmp_val[count%3] = INREG(0x70000);
1298                 if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1]==tmp_val[2]))
1299                         break;
1300                 count++;
1301                 udelay(1);
1302                 if (count % 200 == 0) {
1303                         tmp = INREG(pipe_conf_reg);
1304                         tmp &= ~PIPECONF_ENABLE;
1305                         OUTREG(pipe_conf_reg, tmp);
1306                 }
1307         } while(count < 2000);
1308
1309         OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
1310
1311         /* Disable planes A and B. */
1312         tmp = INREG(DSPACNTR);
1313         tmp &= ~DISPPLANE_PLANE_ENABLE;
1314         OUTREG(DSPACNTR, tmp);
1315         tmp = INREG(DSPBCNTR);
1316         tmp &= ~DISPPLANE_PLANE_ENABLE;
1317         OUTREG(DSPBCNTR, tmp);
1318
1319         /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
1320         mdelay(20);
1321
1322         OUTREG(DVOB, INREG(DVOB) & ~PORT_ENABLE);
1323         OUTREG(DVOC, INREG(DVOC) & ~PORT_ENABLE);
1324         OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
1325
1326         /* Disable Sync */
1327         tmp = INREG(ADPA);
1328         tmp &= ~ADPA_DPMS_CONTROL_MASK;
1329         tmp |= ADPA_DPMS_D3;
1330         OUTREG(ADPA, tmp);
1331
1332         /* do some funky magic - xyzzy */
1333         OUTREG(0x61204, 0xabcd0000);
1334
1335         /* turn off PLL */
1336         tmp = INREG(dpll_reg);
1337         dpll_reg &= ~DPLL_VCO_ENABLE;
1338         OUTREG(dpll_reg, tmp);
1339
1340         /* Set PLL parameters */
1341         OUTREG(fp0_reg, *fp0);
1342         OUTREG(fp1_reg, *fp1);
1343
1344         /* Enable PLL */
1345         OUTREG(dpll_reg, *dpll);
1346
1347         /* Set DVOs B/C */
1348         OUTREG(DVOB, hw->dvob);
1349         OUTREG(DVOC, hw->dvoc);
1350
1351         /* undo funky magic */
1352         OUTREG(0x61204, 0x00000000);
1353
1354         /* Set ADPA */
1355         OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
1356         OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
1357
1358         /* Set pipe parameters */
1359         OUTREG(hsync_reg, *hs);
1360         OUTREG(hblank_reg, *hb);
1361         OUTREG(htotal_reg, *ht);
1362         OUTREG(vsync_reg, *vs);
1363         OUTREG(vblank_reg, *vb);
1364         OUTREG(vtotal_reg, *vt);
1365         OUTREG(src_size_reg, *ss);
1366
1367         /* Enable pipe */
1368         OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
1369
1370         /* Enable sync */
1371         tmp = INREG(ADPA);
1372         tmp &= ~ADPA_DPMS_CONTROL_MASK;
1373         tmp |= ADPA_DPMS_D0;
1374         OUTREG(ADPA, tmp);
1375
1376         /* setup display plane */
1377         if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
1378                 /*
1379                  *      i830M errata: the display plane must be enabled
1380                  *      to allow writes to the other bits in the plane
1381                  *      control register.
1382                  */
1383                 tmp = INREG(DSPACNTR);
1384                 if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
1385                         tmp |= DISPPLANE_PLANE_ENABLE;
1386                         OUTREG(DSPACNTR, tmp);
1387                         OUTREG(DSPACNTR,
1388                                hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
1389                         mdelay(1);
1390                 }
1391         }
1392
1393         OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
1394         OUTREG(DSPASTRIDE, hw->disp_a_stride);
1395         OUTREG(DSPABASE, hw->disp_a_base);
1396
1397         /* Enable plane */
1398         if (!blank) {
1399                 tmp = INREG(DSPACNTR);
1400                 tmp |= DISPPLANE_PLANE_ENABLE;
1401                 OUTREG(DSPACNTR, tmp);
1402                 OUTREG(DSPABASE, hw->disp_a_base);
1403         }
1404
1405         return 0;
1406 }
1407
1408 /* forward declarations */
1409 static void refresh_ring(struct intelfb_info *dinfo);
1410 static void reset_state(struct intelfb_info *dinfo);
1411 static void do_flush(struct intelfb_info *dinfo);
1412
1413 static int
1414 wait_ring(struct intelfb_info *dinfo, int n)
1415 {
1416         int i = 0;
1417         unsigned long end;
1418         u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1419
1420 #if VERBOSE > 0
1421         DBG_MSG("wait_ring: %d\n", n);
1422 #endif
1423
1424         end = jiffies + (HZ * 3);
1425         while (dinfo->ring_space < n) {
1426                 dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1427                 if (dinfo->ring_tail + RING_MIN_FREE < dinfo->ring_head)
1428                         dinfo->ring_space = dinfo->ring_head
1429                                 - (dinfo->ring_tail + RING_MIN_FREE);
1430                 else
1431                         dinfo->ring_space = (dinfo->ring.size +
1432                                              dinfo->ring_head)
1433                                 - (dinfo->ring_tail + RING_MIN_FREE);
1434                 if (dinfo->ring_head != last_head) {
1435                         end = jiffies + (HZ * 3);
1436                         last_head = dinfo->ring_head;
1437                 }
1438                 i++;
1439                 if (time_before(end, jiffies)) {
1440                         if (!i) {
1441                                 /* Try again */
1442                                 reset_state(dinfo);
1443                                 refresh_ring(dinfo);
1444                                 do_flush(dinfo);
1445                                 end = jiffies + (HZ * 3);
1446                                 i = 1;
1447                         } else {
1448                                 WRN_MSG("ring buffer : space: %d wanted %d\n",
1449                                         dinfo->ring_space, n);
1450                                 WRN_MSG("lockup - turning off hardware "
1451                                         "acceleration\n");
1452                                 dinfo->ring_lockup = 1;
1453                                 break;
1454                         }
1455                 }
1456                 udelay(1);
1457         }
1458         return i;
1459 }
1460
1461 static void
1462 do_flush(struct intelfb_info *dinfo) {
1463         START_RING(2);
1464         OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
1465         OUT_RING(MI_NOOP);
1466         ADVANCE_RING();
1467 }
1468
1469 void
1470 intelfbhw_do_sync(struct intelfb_info *dinfo)
1471 {
1472 #if VERBOSE > 0
1473         DBG_MSG("intelfbhw_do_sync\n");
1474 #endif
1475
1476         if (!dinfo->accel)
1477                 return;
1478
1479         /*
1480          * Send a flush, then wait until the ring is empty.  This is what
1481          * the XFree86 driver does, and actually it doesn't seem a lot worse
1482          * than the recommended method (both have problems).
1483          */
1484         do_flush(dinfo);
1485         wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
1486         dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
1487 }
1488
1489 static void
1490 refresh_ring(struct intelfb_info *dinfo)
1491 {
1492 #if VERBOSE > 0
1493         DBG_MSG("refresh_ring\n");
1494 #endif
1495
1496         dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1497         dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
1498         if (dinfo->ring_tail + RING_MIN_FREE < dinfo->ring_head)
1499                 dinfo->ring_space = dinfo->ring_head
1500                         - (dinfo->ring_tail + RING_MIN_FREE);
1501         else
1502                 dinfo->ring_space = (dinfo->ring.size + dinfo->ring_head)
1503                         - (dinfo->ring_tail + RING_MIN_FREE);
1504 }
1505
1506 static void
1507 reset_state(struct intelfb_info *dinfo)
1508 {
1509         int i;
1510         u32 tmp;
1511
1512 #if VERBOSE > 0
1513         DBG_MSG("reset_state\n");
1514 #endif
1515
1516         for (i = 0; i < FENCE_NUM; i++)
1517                 OUTREG(FENCE + (i << 2), 0);
1518
1519         /* Flush the ring buffer if it's enabled. */
1520         tmp = INREG(PRI_RING_LENGTH);
1521         if (tmp & RING_ENABLE) {
1522 #if VERBOSE > 0
1523                 DBG_MSG("reset_state: ring was enabled\n");
1524 #endif
1525                 refresh_ring(dinfo);
1526                 intelfbhw_do_sync(dinfo);
1527                 DO_RING_IDLE();
1528         }
1529
1530         OUTREG(PRI_RING_LENGTH, 0);
1531         OUTREG(PRI_RING_HEAD, 0);
1532         OUTREG(PRI_RING_TAIL, 0);
1533         OUTREG(PRI_RING_START, 0);
1534 }
1535
1536 /* Stop the 2D engine, and turn off the ring buffer. */
1537 void
1538 intelfbhw_2d_stop(struct intelfb_info *dinfo)
1539 {
1540 #if VERBOSE > 0
1541         DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n", dinfo->accel,
1542                 dinfo->ring_active);
1543 #endif
1544
1545         if (!dinfo->accel)
1546                 return;
1547
1548         dinfo->ring_active = 0;
1549         reset_state(dinfo);
1550 }
1551
1552 /*
1553  * Enable the ring buffer, and initialise the 2D engine.
1554  * It is assumed that the graphics engine has been stopped by previously
1555  * calling intelfb_2d_stop().
1556  */
1557 void
1558 intelfbhw_2d_start(struct intelfb_info *dinfo)
1559 {
1560 #if VERBOSE > 0
1561         DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
1562                 dinfo->accel, dinfo->ring_active);
1563 #endif
1564
1565         if (!dinfo->accel)
1566                 return;
1567
1568         /* Initialise the primary ring buffer. */
1569         OUTREG(PRI_RING_LENGTH, 0);
1570         OUTREG(PRI_RING_TAIL, 0);
1571         OUTREG(PRI_RING_HEAD, 0);
1572
1573         OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
1574         OUTREG(PRI_RING_LENGTH,
1575                 ((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
1576                 RING_NO_REPORT | RING_ENABLE);
1577         refresh_ring(dinfo);
1578         dinfo->ring_active = 1;
1579 }
1580
1581 /* 2D fillrect (solid fill or invert) */
1582 void
1583 intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w, u32 h,
1584                       u32 color, u32 pitch, u32 bpp, u32 rop)
1585 {
1586         u32 br00, br09, br13, br14, br16;
1587
1588 #if VERBOSE > 0
1589         DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
1590                 "rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
1591 #endif
1592
1593         br00 = COLOR_BLT_CMD;
1594         br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
1595         br13 = (rop << ROP_SHIFT) | pitch;
1596         br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
1597         br16 = color;
1598
1599         switch (bpp) {
1600         case 8:
1601                 br13 |= COLOR_DEPTH_8;
1602                 break;
1603         case 16:
1604                 br13 |= COLOR_DEPTH_16;
1605                 break;
1606         case 32:
1607                 br13 |= COLOR_DEPTH_32;
1608                 br00 |= WRITE_ALPHA | WRITE_RGB;
1609                 break;
1610         }
1611
1612         START_RING(6);
1613         OUT_RING(br00);
1614         OUT_RING(br13);
1615         OUT_RING(br14);
1616         OUT_RING(br09);
1617         OUT_RING(br16);
1618         OUT_RING(MI_NOOP);
1619         ADVANCE_RING();
1620
1621 #if VERBOSE > 0
1622         DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
1623                 dinfo->ring_tail, dinfo->ring_space);
1624 #endif
1625 }
1626
1627 void
1628 intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
1629                     u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
1630 {
1631         u32 br00, br09, br11, br12, br13, br22, br23, br26;
1632
1633 #if VERBOSE > 0
1634         DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
1635                 curx, cury, dstx, dsty, w, h, pitch, bpp);
1636 #endif
1637
1638         br00 = XY_SRC_COPY_BLT_CMD;
1639         br09 = dinfo->fb_start;
1640         br11 = (pitch << PITCH_SHIFT);
1641         br12 = dinfo->fb_start;
1642         br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
1643         br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
1644         br23 = ((dstx + w) << WIDTH_SHIFT) |
1645                ((dsty + h) << HEIGHT_SHIFT);
1646         br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
1647
1648         switch (bpp) {
1649         case 8:
1650                 br13 |= COLOR_DEPTH_8;
1651                 break;
1652         case 16:
1653                 br13 |= COLOR_DEPTH_16;
1654                 break;
1655         case 32:
1656                 br13 |= COLOR_DEPTH_32;
1657                 br00 |= WRITE_ALPHA | WRITE_RGB;
1658                 break;
1659         }
1660
1661         START_RING(8);
1662         OUT_RING(br00);
1663         OUT_RING(br13);
1664         OUT_RING(br22);
1665         OUT_RING(br23);
1666         OUT_RING(br09);
1667         OUT_RING(br26);
1668         OUT_RING(br11);
1669         OUT_RING(br12);
1670         ADVANCE_RING();
1671 }
1672
1673 int
1674 intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
1675                        u32 h, const u8* cdat, u32 x, u32 y, u32 pitch, u32 bpp)
1676 {
1677         int nbytes, ndwords, pad, tmp;
1678         u32 br00, br09, br13, br18, br19, br22, br23;
1679         int dat, ix, iy, iw;
1680         int i, j;
1681
1682 #if VERBOSE > 0
1683         DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
1684 #endif
1685
1686         /* size in bytes of a padded scanline */
1687         nbytes = ROUND_UP_TO(w, 16) / 8;
1688
1689         /* Total bytes of padded scanline data to write out. */
1690         nbytes = nbytes * h;
1691
1692         /*
1693          * Check if the glyph data exceeds the immediate mode limit.
1694          * It would take a large font (1K pixels) to hit this limit.
1695          */
1696         if (nbytes > MAX_MONO_IMM_SIZE)
1697                 return 0;
1698
1699         /* Src data is packaged a dword (32-bit) at a time. */
1700         ndwords = ROUND_UP_TO(nbytes, 4) / 4;
1701
1702         /*
1703          * Ring has to be padded to a quad word. But because the command starts
1704            with 7 bytes, pad only if there is an even number of ndwords
1705          */
1706         pad = !(ndwords % 2);
1707
1708         tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
1709         br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
1710         br09 = dinfo->fb_start;
1711         br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
1712         br18 = bg;
1713         br19 = fg;
1714         br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
1715         br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
1716
1717         switch (bpp) {
1718         case 8:
1719                 br13 |= COLOR_DEPTH_8;
1720                 break;
1721         case 16:
1722                 br13 |= COLOR_DEPTH_16;
1723                 break;
1724         case 32:
1725                 br13 |= COLOR_DEPTH_32;
1726                 br00 |= WRITE_ALPHA | WRITE_RGB;
1727                 break;
1728         }
1729
1730         START_RING(8 + ndwords);
1731         OUT_RING(br00);
1732         OUT_RING(br13);
1733         OUT_RING(br22);
1734         OUT_RING(br23);
1735         OUT_RING(br09);
1736         OUT_RING(br18);
1737         OUT_RING(br19);
1738         ix = iy = 0;
1739         iw = ROUND_UP_TO(w, 8) / 8;
1740         while (ndwords--) {
1741                 dat = 0;
1742                 for (j = 0; j < 2; ++j) {
1743                         for (i = 0; i < 2; ++i) {
1744                                 if (ix != iw || i == 0)
1745                                         dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
1746                         }
1747                         if (ix == iw && iy != (h-1)) {
1748                                 ix = 0;
1749                                 ++iy;
1750                         }
1751                 }
1752                 OUT_RING(dat);
1753         }
1754         if (pad)
1755                 OUT_RING(MI_NOOP);
1756         ADVANCE_RING();
1757
1758         return 1;
1759 }
1760
1761 /* HW cursor functions. */
1762 void
1763 intelfbhw_cursor_init(struct intelfb_info *dinfo)
1764 {
1765         u32 tmp;
1766
1767 #if VERBOSE > 0
1768         DBG_MSG("intelfbhw_cursor_init\n");
1769 #endif
1770
1771         if (dinfo->mobile || IS_I9XX(dinfo)) {
1772                 if (!dinfo->cursor.physical)
1773                         return;
1774                 tmp = INREG(CURSOR_A_CONTROL);
1775                 tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
1776                          CURSOR_MEM_TYPE_LOCAL |
1777                          (1 << CURSOR_PIPE_SELECT_SHIFT));
1778                 tmp |= CURSOR_MODE_DISABLE;
1779                 OUTREG(CURSOR_A_CONTROL, tmp);
1780                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1781         } else {
1782                 tmp = INREG(CURSOR_CONTROL);
1783                 tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
1784                          CURSOR_ENABLE | CURSOR_STRIDE_MASK);
1785                 tmp = CURSOR_FORMAT_3C;
1786                 OUTREG(CURSOR_CONTROL, tmp);
1787                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
1788                 tmp = (64 << CURSOR_SIZE_H_SHIFT) |
1789                       (64 << CURSOR_SIZE_V_SHIFT);
1790                 OUTREG(CURSOR_SIZE, tmp);
1791         }
1792 }
1793
1794 void
1795 intelfbhw_cursor_hide(struct intelfb_info *dinfo)
1796 {
1797         u32 tmp;
1798
1799 #if VERBOSE > 0
1800         DBG_MSG("intelfbhw_cursor_hide\n");
1801 #endif
1802
1803         dinfo->cursor_on = 0;
1804         if (dinfo->mobile || IS_I9XX(dinfo)) {
1805                 if (!dinfo->cursor.physical)
1806                         return;
1807                 tmp = INREG(CURSOR_A_CONTROL);
1808                 tmp &= ~CURSOR_MODE_MASK;
1809                 tmp |= CURSOR_MODE_DISABLE;
1810                 OUTREG(CURSOR_A_CONTROL, tmp);
1811                 /* Flush changes */
1812                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1813         } else {
1814                 tmp = INREG(CURSOR_CONTROL);
1815                 tmp &= ~CURSOR_ENABLE;
1816                 OUTREG(CURSOR_CONTROL, tmp);
1817         }
1818 }
1819
1820 void
1821 intelfbhw_cursor_show(struct intelfb_info *dinfo)
1822 {
1823         u32 tmp;
1824
1825 #if VERBOSE > 0
1826         DBG_MSG("intelfbhw_cursor_show\n");
1827 #endif
1828
1829         dinfo->cursor_on = 1;
1830
1831         if (dinfo->cursor_blanked)
1832                 return;
1833
1834         if (dinfo->mobile || IS_I9XX(dinfo)) {
1835                 if (!dinfo->cursor.physical)
1836                         return;
1837                 tmp = INREG(CURSOR_A_CONTROL);
1838                 tmp &= ~CURSOR_MODE_MASK;
1839                 tmp |= CURSOR_MODE_64_4C_AX;
1840                 OUTREG(CURSOR_A_CONTROL, tmp);
1841                 /* Flush changes */
1842                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1843         } else {
1844                 tmp = INREG(CURSOR_CONTROL);
1845                 tmp |= CURSOR_ENABLE;
1846                 OUTREG(CURSOR_CONTROL, tmp);
1847         }
1848 }
1849
1850 void
1851 intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
1852 {
1853         u32 tmp;
1854
1855 #if VERBOSE > 0
1856         DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
1857 #endif
1858
1859         /*
1860          * Sets the position. The coordinates are assumed to already
1861          * have any offset adjusted. Assume that the cursor is never
1862          * completely off-screen, and that x, y are always >= 0.
1863          */
1864
1865         tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
1866               ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
1867         OUTREG(CURSOR_A_POSITION, tmp);
1868
1869         if (IS_I9XX(dinfo)) {
1870                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1871         }
1872 }
1873
1874 void
1875 intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
1876 {
1877 #if VERBOSE > 0
1878         DBG_MSG("intelfbhw_cursor_setcolor\n");
1879 #endif
1880
1881         OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
1882         OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
1883         OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
1884         OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
1885 }
1886
1887 void
1888 intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
1889                       u8 *data)
1890 {
1891         u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
1892         int i, j, w = width / 8;
1893         int mod = width % 8, t_mask, d_mask;
1894
1895 #if VERBOSE > 0
1896         DBG_MSG("intelfbhw_cursor_load\n");
1897 #endif
1898
1899         if (!dinfo->cursor.virtual)
1900                 return;
1901
1902         t_mask = 0xff >> mod;
1903         d_mask = ~(0xff >> mod);
1904         for (i = height; i--; ) {
1905                 for (j = 0; j < w; j++) {
1906                         writeb(0x00, addr + j);
1907                         writeb(*(data++), addr + j+8);
1908                 }
1909                 if (mod) {
1910                         writeb(t_mask, addr + j);
1911                         writeb(*(data++) & d_mask, addr + j+8);
1912                 }
1913                 addr += 16;
1914         }
1915 }
1916
1917 void
1918 intelfbhw_cursor_reset(struct intelfb_info *dinfo) {
1919         u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
1920         int i, j;
1921
1922 #if VERBOSE > 0
1923         DBG_MSG("intelfbhw_cursor_reset\n");
1924 #endif
1925
1926         if (!dinfo->cursor.virtual)
1927                 return;
1928
1929         for (i = 64; i--; ) {
1930                 for (j = 0; j < 8; j++) {
1931                         writeb(0xff, addr + j+0);
1932                         writeb(0x00, addr + j+8);
1933                 }
1934                 addr += 16;
1935         }
1936 }