SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/hamradio/baycom_epp.c

   1 /*****************************************************************************/
   2
   3 /*
   4  *      baycom_epp.c  -- baycom epp radio modem driver.
   5  *
   6  *      Copyright (C) 1998-2000
   7  *          Thomas Sailer (sailer@ife.ee.ethz.ch)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  *      This program is distributed in the hope that it will be useful,
  15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *      GNU General Public License for more details.
  18  *
  19  *      You should have received a copy of the GNU General Public License
  20  *      along with this program; if not, write to the Free Software
  21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  *
  23  *  Please note that the GPL allows you to use the driver, NOT the radio.
  24  *  In order to use the radio, you need a license from the communications
  25  *  authority of your country.
  26  *
  27  *
  28  *  History:
  29  *   0.1  xx.xx.1998  Initial version by Matthias Welwarsky (dg2fef)
  30  *   0.2  21.04.1998  Massive rework by Thomas Sailer
  31  *                    Integrated FPGA EPP modem configuration routines
  32  *   0.3  11.05.1998  Took FPGA config out and moved it into a separate program
  33  *   0.4  26.07.1999  Adapted to new lowlevel parport driver interface
  34  *   0.5  03.08.1999  adapt to Linus' new __setup/__initcall
  35  *                    removed some pre-2.2 kernel compatibility cruft
  36  *   0.6  10.08.1999  Check if parport can do SPP and is safe to access during interrupt contexts
  37  *   0.7  12.02.2000  adapted to softnet driver interface
  38  *
  39  */
  40
  41 /*****************************************************************************/
  42
  43 #include <linux/crc-ccitt.h>
  44 #include <linux/module.h>
  45 #include <linux/kernel.h>
  46 #include <linux/init.h>
  47 #include <linux/sched.h>
  48 #include <linux/string.h>
  49 #include <linux/workqueue.h>
  50 #include <linux/fs.h>
  51 #include <linux/parport.h>
  52 #include <linux/if_arp.h>
  53 #include <linux/hdlcdrv.h>
  54 #include <linux/baycom.h>
  55 #include <linux/jiffies.h>
  56 #include <linux/random.h>
  57 #include <net/ax25.h>
  58 #include <asm/uaccess.h>
  59
  60 /* --------------------------------------------------------------------- */
  61
  62 #define BAYCOM_DEBUG
  63 #define BAYCOM_MAGIC 19730510
  64
  65 /* --------------------------------------------------------------------- */
  66
  67 static const char paranoia_str[] = KERN_ERR
  68         "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
  69
  70 static const char bc_drvname[] = "baycom_epp";
  71 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
  72 "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
  73
  74 /* --------------------------------------------------------------------- */
  75
  76 #define NR_PORTS 4
  77
  78 static struct net_device *baycom_device[NR_PORTS];
  79
  80 /* --------------------------------------------------------------------- */
  81
  82 /* EPP status register */
  83 #define EPP_DCDBIT      0x80
  84 #define EPP_PTTBIT      0x08
  85 #define EPP_NREF        0x01
  86 #define EPP_NRAEF       0x02
  87 #define EPP_NRHF        0x04
  88 #define EPP_NTHF        0x20
  89 #define EPP_NTAEF       0x10
  90 #define EPP_NTEF        EPP_PTTBIT
  91
  92 /* EPP control register */
  93 #define EPP_TX_FIFO_ENABLE 0x10
  94 #define EPP_RX_FIFO_ENABLE 0x08
  95 #define EPP_MODEM_ENABLE   0x20
  96 #define EPP_LEDS           0xC0
  97 #define EPP_IRQ_ENABLE     0x10
  98
  99 /* LPT registers */
 100 #define LPTREG_ECONTROL       0x402
 101 #define LPTREG_CONFIGB        0x401
 102 #define LPTREG_CONFIGA        0x400
 103 #define LPTREG_EPPDATA        0x004
 104 #define LPTREG_EPPADDR        0x003
 105 #define LPTREG_CONTROL        0x002
 106 #define LPTREG_STATUS         0x001
 107 #define LPTREG_DATA           0x000
 108
 109 /* LPT control register */
 110 #define LPTCTRL_PROGRAM       0x04   /* 0 to reprogram */
 111 #define LPTCTRL_WRITE         0x01
 112 #define LPTCTRL_ADDRSTB       0x08
 113 #define LPTCTRL_DATASTB       0x02
 114 #define LPTCTRL_INTEN         0x10
 115
 116 /* LPT status register */
 117 #define LPTSTAT_SHIFT_NINTR   6
 118 #define LPTSTAT_WAIT          0x80
 119 #define LPTSTAT_NINTR         (1<<LPTSTAT_SHIFT_NINTR)
 120 #define LPTSTAT_PE            0x20
 121 #define LPTSTAT_DONE          0x10
 122 #define LPTSTAT_NERROR        0x08
 123 #define LPTSTAT_EPPTIMEOUT    0x01
 124
 125 /* LPT data register */
 126 #define LPTDATA_SHIFT_TDI     0
 127 #define LPTDATA_SHIFT_TMS     2
 128 #define LPTDATA_TDI           (1<<LPTDATA_SHIFT_TDI)
 129 #define LPTDATA_TCK           0x02
 130 #define LPTDATA_TMS           (1<<LPTDATA_SHIFT_TMS)
 131 #define LPTDATA_INITBIAS      0x80
 132
 133
 134 /* EPP modem config/status bits */
 135 #define EPP_DCDBIT            0x80
 136 #define EPP_PTTBIT            0x08
 137 #define EPP_RXEBIT            0x01
 138 #define EPP_RXAEBIT           0x02
 139 #define EPP_RXHFULL           0x04
 140
 141 #define EPP_NTHF              0x20
 142 #define EPP_NTAEF             0x10
 143 #define EPP_NTEF              EPP_PTTBIT
 144
 145 #define EPP_TX_FIFO_ENABLE    0x10
 146 #define EPP_RX_FIFO_ENABLE    0x08
 147 #define EPP_MODEM_ENABLE      0x20
 148 #define EPP_LEDS              0xC0
 149 #define EPP_IRQ_ENABLE        0x10
 150
 151 /* Xilinx 4k JTAG instructions */
 152 #define XC4K_IRLENGTH   3
 153 #define XC4K_EXTEST     0
 154 #define XC4K_PRELOAD    1
 155 #define XC4K_CONFIGURE  5
 156 #define XC4K_BYPASS     7
 157
 158 #define EPP_CONVENTIONAL  0
 159 #define EPP_FPGA          1
 160 #define EPP_FPGAEXTSTATUS 2
 161
 162 #define TXBUFFER_SIZE     ((HDLCDRV_MAXFLEN*6/5)+8)
 163
 164 /* ---------------------------------------------------------------------- */
 165 /*
 166  * Information that need to be kept for each board.
 167  */
 168
 169 struct baycom_state {
 170         int magic;
 171
 172         struct pardevice *pdev;
 173         struct net_device *dev;
 174         unsigned int work_running;
 175         struct delayed_work run_work;
 176         unsigned int modem;
 177         unsigned int bitrate;
 178         unsigned char stat;
 179
 180         struct {
 181                 unsigned int intclk;
 182                 unsigned int fclk;
 183                 unsigned int bps;
 184                 unsigned int extmodem;
 185                 unsigned int loopback;
 186         } cfg;
 187
 188         struct hdlcdrv_channel_params ch_params;
 189
 190         struct {
 191                 unsigned int bitbuf, bitstream, numbits, state;
 192                 unsigned char *bufptr;
 193                 int bufcnt;
 194                 unsigned char buf[TXBUFFER_SIZE];
 195         } hdlcrx;
 196
 197         struct {
 198                 int calibrate;
 199                 int slotcnt;
 200                 int flags;
 201                 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
 202                 unsigned char *bufptr;
 203                 int bufcnt;
 204                 unsigned char buf[TXBUFFER_SIZE];
 205         } hdlctx;
 206
 207         unsigned int ptt_keyed;
 208         struct sk_buff *skb;  /* next transmit packet  */
 209
 210 #ifdef BAYCOM_DEBUG
 211         struct debug_vals {
 212                 unsigned long last_jiffies;
 213                 unsigned cur_intcnt;
 214                 unsigned last_intcnt;
 215                 int cur_pllcorr;
 216                 int last_pllcorr;
 217                 unsigned int mod_cycles;
 218                 unsigned int demod_cycles;
 219         } debug_vals;
 220 #endif /* BAYCOM_DEBUG */
 221 };
 222
 223 /* --------------------------------------------------------------------- */
 224
 225 #define KISS_VERBOSE
 226
 227 /* --------------------------------------------------------------------- */
 228
 229 #define PARAM_TXDELAY   1
 230 #define PARAM_PERSIST   2
 231 #define PARAM_SLOTTIME  3
 232 #define PARAM_TXTAIL    4
 233 #define PARAM_FULLDUP   5
 234 #define PARAM_HARDWARE  6
 235 #define PARAM_RETURN    255
 236
 237 /* --------------------------------------------------------------------- */
 238 /*
 239  * the CRC routines are stolen from WAMPES
 240  * by Dieter Deyke
 241  */
 242
 243
 244 /*---------------------------------------------------------------------------*/
 245
 246 #if 0
 247 static inline void append_crc_ccitt(unsigned char *buffer, int len)
 248 {
 249         unsigned int crc = 0xffff;
 250
 251         for (;len>0;len--)
 252                 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
 253         crc ^= 0xffff;
 254         *buffer++ = crc;
 255         *buffer++ = crc >> 8;
 256 }
 257 #endif
 258
 259 /*---------------------------------------------------------------------------*/
 260
 261 static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
 262 {
 263         return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
 264 }
 265
 266 /*---------------------------------------------------------------------------*/
 267
 268 static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
 269 {
 270         return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
 271 }
 272
 273 /* ---------------------------------------------------------------------- */
 274
 275 #define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
 276
 277 /* --------------------------------------------------------------------- */
 278
 279 static inline void baycom_int_freq(struct baycom_state *bc)
 280 {
 281 #ifdef BAYCOM_DEBUG
 282         unsigned long cur_jiffies = jiffies;
 283         /*
 284          * measure the interrupt frequency
 285          */
 286         bc->debug_vals.cur_intcnt++;
 287         if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
 288                 bc->debug_vals.last_jiffies = cur_jiffies;
 289                 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
 290                 bc->debug_vals.cur_intcnt = 0;
 291                 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
 292                 bc->debug_vals.cur_pllcorr = 0;
 293         }
 294 #endif /* BAYCOM_DEBUG */
 295 }
 296
 297 /* ---------------------------------------------------------------------- */
 298 /*
 299  *    eppconfig_path should be setable  via /proc/sys.
 300  */
 301
 302 static char eppconfig_path[256] = "/usr/sbin/eppfpga";
 303
 304 static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
 305
 306 /* eppconfig: called during ifconfig up to configure the modem */
 307 static int eppconfig(struct baycom_state *bc)
 308 {
 309         char modearg[256];
 310         char portarg[16];
 311         char *argv[] = { eppconfig_path, "-s", "-p", portarg, "-m", modearg,
 312                          NULL };
 313
 314         /* set up arguments */
 315         sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
 316                 bc->cfg.intclk ? "int" : "ext",
 317                 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
 318                 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
 319                 bc->cfg.loopback ? ",loopback" : "");
 320         sprintf(portarg, "%ld", bc->pdev->port->base);
 321         printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
 322
 323         return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
 324 }
 325
 326 /* ---------------------------------------------------------------------- */
 327
 328 static inline void do_kiss_params(struct baycom_state *bc,
 329                                   unsigned char *data, unsigned long len)
 330 {
 331
 332 #ifdef KISS_VERBOSE
 333 #define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
 334 #else /* KISS_VERBOSE */
 335 #define PKP(a,b)
 336 #endif /* KISS_VERBOSE */
 337
 338         if (len < 2)
 339                 return;
 340         switch(data[0]) {
 341         case PARAM_TXDELAY:
 342                 bc->ch_params.tx_delay = data[1];
 343                 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
 344                 break;
 345         case PARAM_PERSIST:
 346                 bc->ch_params.ppersist = data[1];
 347                 PKP("p persistence = %u", bc->ch_params.ppersist);
 348                 break;
 349         case PARAM_SLOTTIME:
 350                 bc->ch_params.slottime = data[1];
 351                 PKP("slot time = %ums", bc->ch_params.slottime);
 352                 break;
 353         case PARAM_TXTAIL:
 354                 bc->ch_params.tx_tail = data[1];
 355                 PKP("TX tail = %ums", bc->ch_params.tx_tail);
 356                 break;
 357         case PARAM_FULLDUP:
 358                 bc->ch_params.fulldup = !!data[1];
 359                 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
 360                 break;
 361         default:
 362                 break;
 363         }
 364 #undef PKP
 365 }
 366
 367 /* --------------------------------------------------------------------- */
 368
 369 static void encode_hdlc(struct baycom_state *bc)
 370 {
 371         struct sk_buff *skb;
 372         unsigned char *wp, *bp;
 373         int pkt_len;
 374         unsigned bitstream, notbitstream, bitbuf, numbit, crc;
 375         unsigned char crcarr[2];
 376         int j;
 377
 378         if (bc->hdlctx.bufcnt > 0)
 379                 return;
 380         skb = bc->skb;
 381         if (!skb)
 382                 return;
 383         bc->skb = NULL;
 384         pkt_len = skb->len-1; /* strip KISS byte */
 385         wp = bc->hdlctx.buf;
 386         bp = skb->data+1;
 387         crc = calc_crc_ccitt(bp, pkt_len);
 388         crcarr[0] = crc;
 389         crcarr[1] = crc >> 8;
 390         *wp++ = 0x7e;
 391         bitstream = bitbuf = numbit = 0;
 392         while (pkt_len > -2) {
 393                 bitstream >>= 8;
 394                 bitstream |= ((unsigned int)*bp) << 8;
 395                 bitbuf |= ((unsigned int)*bp) << numbit;
 396                 notbitstream = ~bitstream;
 397                 bp++;
 398                 pkt_len--;
 399                 if (!pkt_len)
 400                         bp = crcarr;
 401                 for (j = 0; j < 8; j++)
 402                         if (unlikely(!(notbitstream & (0x1f0 << j)))) {
 403                                 bitstream &= ~(0x100 << j);
 404                                 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
 405                                         ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
 406                                 numbit++;
 407                                 notbitstream = ~bitstream;
 408                         }
 409                 numbit += 8;
 410                 while (numbit >= 8) {
 411                         *wp++ = bitbuf;
 412                         bitbuf >>= 8;
 413                         numbit -= 8;
 414                 }
 415         }
 416         bitbuf |= 0x7e7e << numbit;
 417         numbit += 16;
 418         while (numbit >= 8) {
 419                 *wp++ = bitbuf;
 420                 bitbuf >>= 8;
 421                 numbit -= 8;
 422         }
 423         bc->hdlctx.bufptr = bc->hdlctx.buf;
 424         bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
 425         dev_kfree_skb(skb);
 426         bc->dev->stats.tx_packets++;
 427 }
 428
 429 /* ---------------------------------------------------------------------- */
 430
 431 static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
 432 {
 433         struct parport *pp = bc->pdev->port;
 434         unsigned char tmp[128];
 435         int i, j;
 436
 437         if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
 438                 bc->hdlctx.state = tx_idle;
 439         if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
 440                 if (bc->hdlctx.bufcnt <= 0)
 441                         encode_hdlc(bc);
 442                 if (bc->hdlctx.bufcnt <= 0)
 443                         return 0;
 444                 if (!bc->ch_params.fulldup) {
 445                         if (!(stat & EPP_DCDBIT)) {
 446                                 bc->hdlctx.slotcnt = bc->ch_params.slottime;
 447                                 return 0;
 448                         }
 449                         if ((--bc->hdlctx.slotcnt) > 0)
 450                                 return 0;
 451                         bc->hdlctx.slotcnt = bc->ch_params.slottime;
 452                         if ((random32() % 256) > bc->ch_params.ppersist)
 453                                 return 0;
 454                 }
 455         }
 456         if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
 457                 bc->hdlctx.state = tx_keyup;
 458                 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
 459                 bc->ptt_keyed++;
 460         }
 461         while (cnt > 0) {
 462                 switch (bc->hdlctx.state) {
 463                 case tx_keyup:
 464                         i = min_t(int, cnt, bc->hdlctx.flags);
 465                         cnt -= i;
 466                         bc->hdlctx.flags -= i;
 467                         if (bc->hdlctx.flags <= 0)
 468                                 bc->hdlctx.state = tx_data;
 469                         memset(tmp, 0x7e, sizeof(tmp));
 470                         while (i > 0) {
 471                                 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
 472                                 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
 473                                         return -1;
 474                                 i -= j;
 475                         }
 476                         break;
 477
 478                 case tx_data:
 479                         if (bc->hdlctx.bufcnt <= 0) {
 480                                 encode_hdlc(bc);
 481                                 if (bc->hdlctx.bufcnt <= 0) {
 482                                         bc->hdlctx.state = tx_tail;
 483                                         bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
 484                                         break;
 485                                 }
 486                         }
 487                         i = min_t(int, cnt, bc->hdlctx.bufcnt);
 488                         bc->hdlctx.bufcnt -= i;
 489                         cnt -= i;
 490                         if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
 491                                         return -1;
 492                         bc->hdlctx.bufptr += i;
 493                         break;
 494
 495                 case tx_tail:
 496                         encode_hdlc(bc);
 497                         if (bc->hdlctx.bufcnt > 0) {
 498                                 bc->hdlctx.state = tx_data;
 499                                 break;
 500                         }
 501                         i = min_t(int, cnt, bc->hdlctx.flags);
 502                         if (i) {
 503                                 cnt -= i;
 504                                 bc->hdlctx.flags -= i;
 505                                 memset(tmp, 0x7e, sizeof(tmp));
 506                                 while (i > 0) {
 507                                         j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
 508                                         if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
 509                                                 return -1;
 510                                         i -= j;
 511                                 }
 512                                 break;
 513                         }
 514
 515                 default:  /* fall through */
 516                         if (bc->hdlctx.calibrate <= 0)
 517                                 return 0;
 518                         i = min_t(int, cnt, bc->hdlctx.calibrate);
 519                         cnt -= i;
 520                         bc->hdlctx.calibrate -= i;
 521                         memset(tmp, 0, sizeof(tmp));
 522                         while (i > 0) {
 523                                 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
 524                                 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
 525                                         return -1;
 526                                 i -= j;
 527                         }
 528                         break;
 529                 }
 530         }
 531         return 0;
 532 }
 533
 534 /* ---------------------------------------------------------------------- */
 535
 536 static void do_rxpacket(struct net_device *dev)
 537 {
 538         struct baycom_state *bc = netdev_priv(dev);
 539         struct sk_buff *skb;
 540         unsigned char *cp;
 541         unsigned pktlen;
 542
 543         if (bc->hdlcrx.bufcnt < 4)
 544                 return;
 545         if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt))
 546                 return;
 547         pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
 548         if (!(skb = dev_alloc_skb(pktlen))) {
 549                 printk("%s: memory squeeze, dropping packet\n", dev->name);
 550                 dev->stats.rx_dropped++;
 551                 return;
 552         }
 553         cp = skb_put(skb, pktlen);
 554         *cp++ = 0; /* KISS kludge */
 555         memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
 556         skb->protocol = ax25_type_trans(skb, dev);
 557         netif_rx(skb);
 558         dev->stats.rx_packets++;
 559 }
 560
 561 static int receive(struct net_device *dev, int cnt)
 562 {
 563         struct baycom_state *bc = netdev_priv(dev);
 564         struct parport *pp = bc->pdev->port;
 565         unsigned int bitbuf, notbitstream, bitstream, numbits, state;
 566         unsigned char tmp[128];
 567         unsigned char *cp;
 568         int cnt2, ret = 0;
 569         int j;
 570
 571         numbits = bc->hdlcrx.numbits;
 572         state = bc->hdlcrx.state;
 573         bitstream = bc->hdlcrx.bitstream;
 574         bitbuf = bc->hdlcrx.bitbuf;
 575         while (cnt > 0) {
 576                 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
 577                 cnt -= cnt2;
 578                 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
 579                         ret = -1;
 580                         break;
 581                 }
 582                 cp = tmp;
 583                 for (; cnt2 > 0; cnt2--, cp++) {
 584                         bitstream >>= 8;
 585                         bitstream |= (*cp) << 8;
 586                         bitbuf >>= 8;
 587                         bitbuf |= (*cp) << 8;
 588                         numbits += 8;
 589                         notbitstream = ~bitstream;
 590                         for (j = 0; j < 8; j++) {
 591
 592                                 /* flag or abort */
 593                                 if (unlikely(!(notbitstream & (0x0fc << j)))) {
 594
 595                                         /* abort received */
 596                                         if (!(notbitstream & (0x1fc << j)))
 597                                                 state = 0;
 598
 599                                         /* not flag received */
 600                                         else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
 601                                                 if (state)
 602                                                         do_rxpacket(dev);
 603                                                 bc->hdlcrx.bufcnt = 0;
 604                                                 bc->hdlcrx.bufptr = bc->hdlcrx.buf;
 605                                                 state = 1;
 606                                                 numbits = 7-j;
 607                                                 }
 608                                         }
 609
 610                                 /* stuffed bit */
 611                                 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
 612                                         numbits--;
 613                                         bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
 614                                         }
 615                                 }
 616                         while (state && numbits >= 8) {
 617                                 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
 618                                         state = 0;
 619                                 } else {
 620                                         *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
 621                                         bc->hdlcrx.bufcnt++;
 622                                         numbits -= 8;
 623                                 }
 624                         }
 625                 }
 626         }
 627         bc->hdlcrx.numbits = numbits;
 628         bc->hdlcrx.state = state;
 629         bc->hdlcrx.bitstream = bitstream;
 630         bc->hdlcrx.bitbuf = bitbuf;
 631         return ret;
 632 }
 633
 634 /* --------------------------------------------------------------------- */
 635
 636 #ifdef __i386__
 637 #include <asm/msr.h>
 638 #define GETTICK(x)                                                \
 639 ({                                                                \
 640         if (cpu_has_tsc)                                          \
 641                 rdtscl(x);                                        \
 642 })
 643 #else /* __i386__ */
 644 #define GETTICK(x)
 645 #endif /* __i386__ */
 646
 647 static void epp_bh(struct work_struct *work)
 648 {
 649         struct net_device *dev;
 650         struct baycom_state *bc;
 651         struct parport *pp;
 652         unsigned char stat;
 653         unsigned char tmp[2];
 654         unsigned int time1 = 0, time2 = 0, time3 = 0;
 655         int cnt, cnt2;
 656
 657         bc = container_of(work, struct baycom_state, run_work.work);
 658         dev = bc->dev;
 659         if (!bc->work_running)
 660                 return;
 661         baycom_int_freq(bc);
 662         pp = bc->pdev->port;
 663         /* update status */
 664         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 665                 goto epptimeout;
 666         bc->stat = stat;
 667         bc->debug_vals.last_pllcorr = stat;
 668         GETTICK(time1);
 669         if (bc->modem == EPP_FPGAEXTSTATUS) {
 670                 /* get input count */
 671                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
 672                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
 673                         goto epptimeout;
 674                 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
 675                         goto epptimeout;
 676                 cnt = tmp[0] | (tmp[1] << 8);
 677                 cnt &= 0x7fff;
 678                 /* get output count */
 679                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
 680                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
 681                         goto epptimeout;
 682                 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
 683                         goto epptimeout;
 684                 cnt2 = tmp[0] | (tmp[1] << 8);
 685                 cnt2 = 16384 - (cnt2 & 0x7fff);
 686                 /* return to normal */
 687                 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
 688                 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
 689                         goto epptimeout;
 690                 if (transmit(bc, cnt2, stat))
 691                         goto epptimeout;
 692                 GETTICK(time2);
 693                 if (receive(dev, cnt))
 694                         goto epptimeout;
 695                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 696                         goto epptimeout;
 697                 bc->stat = stat;
 698         } else {
 699                 /* try to tx */
 700                 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
 701                 case EPP_NTHF:
 702                         cnt = 2048 - 256;
 703                         break;
 704
 705                 case EPP_NTAEF:
 706                         cnt = 2048 - 1793;
 707                         break;
 708
 709                 case 0:
 710                         cnt = 0;
 711                         break;
 712
 713                 default:
 714                         cnt = 2048 - 1025;
 715                         break;
 716                 }
 717                 if (transmit(bc, cnt, stat))
 718                         goto epptimeout;
 719                 GETTICK(time2);
 720                 /* do receiver */
 721                 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
 722                         switch (stat & (EPP_NRAEF|EPP_NRHF)) {
 723                         case EPP_NRAEF:
 724                                 cnt = 1025;
 725                                 break;
 726
 727                         case 0:
 728                                 cnt = 1793;
 729                                 break;
 730
 731                         default:
 732                                 cnt = 256;
 733                                 break;
 734                         }
 735                         if (receive(dev, cnt))
 736                                 goto epptimeout;
 737                         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 738                                 goto epptimeout;
 739                 }
 740                 cnt = 0;
 741                 if (bc->bitrate < 50000)
 742                         cnt = 256;
 743                 else if (bc->bitrate < 100000)
 744                         cnt = 128;
 745                 while (cnt > 0 && stat & EPP_NREF) {
 746                         if (receive(dev, 1))
 747                                 goto epptimeout;
 748                         cnt--;
 749                         if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 750                                 goto epptimeout;
 751                 }
 752         }
 753         GETTICK(time3);
 754 #ifdef BAYCOM_DEBUG
 755         bc->debug_vals.mod_cycles = time2 - time1;
 756         bc->debug_vals.demod_cycles = time3 - time2;
 757 #endif /* BAYCOM_DEBUG */
 758         schedule_delayed_work(&bc->run_work, 1);
 759         if (!bc->skb)
 760                 netif_wake_queue(dev);
 761         return;
 762  epptimeout:
 763         printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
 764 }
 765
 766 /* ---------------------------------------------------------------------- */
 767 /*
 768  * ===================== network driver interface =========================
 769  */
 770
 771 static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
 772 {
 773         struct baycom_state *bc = netdev_priv(dev);
 774
 775         if (skb->data[0] != 0) {
 776                 do_kiss_params(bc, skb->data, skb->len);
 777                 dev_kfree_skb(skb);
 778                 return NETDEV_TX_OK;
 779         }
 780         if (bc->skb)
 781                 return NETDEV_TX_LOCKED;
 782         /* strip KISS byte */
 783         if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
 784                 dev_kfree_skb(skb);
 785                 return NETDEV_TX_OK;
 786         }
 787         netif_stop_queue(dev);
 788         bc->skb = skb;
 789         return NETDEV_TX_OK;
 790 }
 791
 792 /* --------------------------------------------------------------------- */
 793
 794 static int baycom_set_mac_address(struct net_device *dev, void *addr)
 795 {
 796         struct sockaddr *sa = (struct sockaddr *)addr;
 797
 798         /* addr is an AX.25 shifted ASCII mac address */
 799         memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
 800         return 0;
 801 }
 802
 803 /* --------------------------------------------------------------------- */
 804
 805 static void epp_wakeup(void *handle)
 806 {
 807         struct net_device *dev = (struct net_device *)handle;
 808         struct baycom_state *bc = netdev_priv(dev);
 809
 810         printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
 811         if (!parport_claim(bc->pdev))
 812                 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
 813 }
 814
 815 /* --------------------------------------------------------------------- */
 816
 817 /*
 818  * Open/initialize the board. This is called (in the current kernel)
 819  * sometime after booting when the 'ifconfig' program is run.
 820  *
 821  * This routine should set everything up anew at each open, even
 822  * registers that "should" only need to be set once at boot, so that
 823  * there is non-reboot way to recover if something goes wrong.
 824  */
 825
 826 static int epp_open(struct net_device *dev)
 827 {
 828         struct baycom_state *bc = netdev_priv(dev);
 829         struct parport *pp = parport_find_base(dev->base_addr);
 830         unsigned int i, j;
 831         unsigned char tmp[128];
 832         unsigned char stat;
 833         unsigned long tstart;
 834
 835         if (!pp) {
 836                 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
 837                 return -ENXIO;
 838         }
 839 #if 0
 840         if (pp->irq < 0) {
 841                 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
 842                 parport_put_port(pp);
 843                 return -ENXIO;
 844         }
 845 #endif
 846         if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
 847                 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
 848                        bc_drvname, pp->base);
 849                 parport_put_port(pp);
 850                 return -EIO;
 851         }
 852         memset(&bc->modem, 0, sizeof(bc->modem));
 853         bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup,
 854                                            NULL, PARPORT_DEV_EXCL, dev);
 855         parport_put_port(pp);
 856         if (!bc->pdev) {
 857                 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
 858                 return -ENXIO;
 859         }
 860         if (parport_claim(bc->pdev)) {
 861                 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
 862                 parport_unregister_device(bc->pdev);
 863                 return -EBUSY;
 864         }
 865         dev->irq = /*pp->irq*/ 0;
 866         INIT_DELAYED_WORK(&bc->run_work, epp_bh);
 867         bc->work_running = 1;
 868         bc->modem = EPP_CONVENTIONAL;
 869         if (eppconfig(bc))
 870                 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
 871         else
 872                 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
 873         parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
 874         /* reset the modem */
 875         tmp[0] = 0;
 876         tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
 877         if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
 878                 goto epptimeout;
 879         /* autoprobe baud rate */
 880         tstart = jiffies;
 881         i = 0;
 882         while (time_before(jiffies, tstart + HZ/3)) {
 883                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 884                         goto epptimeout;
 885                 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
 886                         schedule();
 887                         continue;
 888                 }
 889                 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
 890                         goto epptimeout;
 891                 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
 892                         goto epptimeout;
 893                 i += 256;
 894         }
 895         for (j = 0; j < 256; j++) {
 896                 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 897                         goto epptimeout;
 898                 if (!(stat & EPP_NREF))
 899                         break;
 900                 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
 901                         goto epptimeout;
 902                 i++;
 903         }
 904         tstart = jiffies - tstart;
 905         bc->bitrate = i * (8 * HZ) / tstart;
 906         j = 1;
 907         i = bc->bitrate >> 3;
 908         while (j < 7 && i > 150) {
 909                 j++;
 910                 i >>= 1;
 911         }
 912         printk(KERN_INFO "%s: autoprobed bitrate: %d  int divider: %d  int rate: %d\n",
 913                bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
 914         tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
 915         if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
 916                 goto epptimeout;
 917         /*
 918          * initialise hdlc variables
 919          */
 920         bc->hdlcrx.state = 0;
 921         bc->hdlcrx.numbits = 0;
 922         bc->hdlctx.state = tx_idle;
 923         bc->hdlctx.bufcnt = 0;
 924         bc->hdlctx.slotcnt = bc->ch_params.slottime;
 925         bc->hdlctx.calibrate = 0;
 926         /* start the bottom half stuff */
 927         schedule_delayed_work(&bc->run_work, 1);
 928         netif_start_queue(dev);
 929         return 0;
 930
 931  epptimeout:
 932         printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
 933         parport_write_control(pp, 0); /* reset the adapter */
 934         parport_release(bc->pdev);
 935         parport_unregister_device(bc->pdev);
 936         return -EIO;
 937 }
 938
 939 /* --------------------------------------------------------------------- */
 940
 941 static int epp_close(struct net_device *dev)
 942 {
 943         struct baycom_state *bc = netdev_priv(dev);
 944         struct parport *pp = bc->pdev->port;
 945         unsigned char tmp[1];
 946
 947         bc->work_running = 0;
 948         cancel_delayed_work_sync(&bc->run_work);
 949         bc->stat = EPP_DCDBIT;
 950         tmp[0] = 0;
 951         pp->ops->epp_write_addr(pp, tmp, 1, 0);
 952         parport_write_control(pp, 0); /* reset the adapter */
 953         parport_release(bc->pdev);
 954         parport_unregister_device(bc->pdev);
 955         if (bc->skb)
 956                 dev_kfree_skb(bc->skb);
 957         bc->skb = NULL;
 958         printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
 959                bc_drvname, dev->base_addr, dev->irq);
 960         return 0;
 961 }
 962
 963 /* --------------------------------------------------------------------- */
 964
 965 static int baycom_setmode(struct baycom_state *bc, const char *modestr)
 966 {
 967         const char *cp;
 968
 969         if (strstr(modestr,"intclk"))
 970                 bc->cfg.intclk = 1;
 971         if (strstr(modestr,"extclk"))
 972                 bc->cfg.intclk = 0;
 973         if (strstr(modestr,"intmodem"))
 974                 bc->cfg.extmodem = 0;
 975         if (strstr(modestr,"extmodem"))
 976                 bc->cfg.extmodem = 1;
 977         if (strstr(modestr,"noloopback"))
 978                 bc->cfg.loopback = 0;
 979         if (strstr(modestr,"loopback"))
 980                 bc->cfg.loopback = 1;
 981         if ((cp = strstr(modestr,"fclk="))) {
 982                 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
 983                 if (bc->cfg.fclk < 1000000)
 984                         bc->cfg.fclk = 1000000;
 985                 if (bc->cfg.fclk > 25000000)
 986                         bc->cfg.fclk = 25000000;
 987         }
 988         if ((cp = strstr(modestr,"bps="))) {
 989                 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
 990                 if (bc->cfg.bps < 1000)
 991                         bc->cfg.bps = 1000;
 992                 if (bc->cfg.bps > 1500000)
 993                         bc->cfg.bps = 1500000;
 994         }
 995         return 0;
 996 }
 997
 998 /* --------------------------------------------------------------------- */
 999
1000 static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1001 {
1002         struct baycom_state *bc = netdev_priv(dev);
1003         struct hdlcdrv_ioctl hi;
1004
1005         if (cmd != SIOCDEVPRIVATE)
1006                 return -ENOIOCTLCMD;
1007
1008         if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi)))
1009                 return -EFAULT;
1010         switch (hi.cmd) {
1011         default:
1012                 return -ENOIOCTLCMD;
1013
1014         case HDLCDRVCTL_GETCHANNELPAR:
1015                 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1016                 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1017                 hi.data.cp.slottime = bc->ch_params.slottime;
1018                 hi.data.cp.ppersist = bc->ch_params.ppersist;
1019                 hi.data.cp.fulldup = bc->ch_params.fulldup;
1020                 break;
1021
1022         case HDLCDRVCTL_SETCHANNELPAR:
1023                 if (!capable(CAP_NET_ADMIN))
1024                         return -EACCES;
1025                 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1026                 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1027                 bc->ch_params.slottime = hi.data.cp.slottime;
1028                 bc->ch_params.ppersist = hi.data.cp.ppersist;
1029                 bc->ch_params.fulldup = hi.data.cp.fulldup;
1030                 bc->hdlctx.slotcnt = 1;
1031                 return 0;
1032
1033         case HDLCDRVCTL_GETMODEMPAR:
1034                 hi.data.mp.iobase = dev->base_addr;
1035                 hi.data.mp.irq = dev->irq;
1036                 hi.data.mp.dma = dev->dma;
1037                 hi.data.mp.dma2 = 0;
1038                 hi.data.mp.seriobase = 0;
1039                 hi.data.mp.pariobase = 0;
1040                 hi.data.mp.midiiobase = 0;
1041                 break;
1042
1043         case HDLCDRVCTL_SETMODEMPAR:
1044                 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1045                         return -EACCES;
1046                 dev->base_addr = hi.data.mp.iobase;
1047                 dev->irq = /*hi.data.mp.irq*/0;
1048                 dev->dma = /*hi.data.mp.dma*/0;
1049                 return 0;
1050
1051         case HDLCDRVCTL_GETSTAT:
1052                 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1053                 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1054                 hi.data.cs.ptt_keyed = bc->ptt_keyed;
1055                 hi.data.cs.tx_packets = dev->stats.tx_packets;
1056                 hi.data.cs.tx_errors = dev->stats.tx_errors;
1057                 hi.data.cs.rx_packets = dev->stats.rx_packets;
1058                 hi.data.cs.rx_errors = dev->stats.rx_errors;
1059                 break;
1060
1061         case HDLCDRVCTL_OLDGETSTAT:
1062                 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1063                 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1064                 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1065                 break;
1066
1067         case HDLCDRVCTL_CALIBRATE:
1068                 if (!capable(CAP_SYS_RAWIO))
1069                         return -EACCES;
1070                 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1071                 return 0;
1072
1073         case HDLCDRVCTL_DRIVERNAME:
1074                 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1075                 break;
1076
1077         case HDLCDRVCTL_GETMODE:
1078                 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
1079                         bc->cfg.intclk ? "int" : "ext",
1080                         bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1081                         bc->cfg.loopback ? ",loopback" : "");
1082                 break;
1083
1084         case HDLCDRVCTL_SETMODE:
1085                 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1086                         return -EACCES;
1087                 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1088                 return baycom_setmode(bc, hi.data.modename);
1089
1090         case HDLCDRVCTL_MODELIST:
1091                 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1092                         sizeof(hi.data.modename));
1093                 break;
1094
1095         case HDLCDRVCTL_MODEMPARMASK:
1096                 return HDLCDRV_PARMASK_IOBASE;
1097
1098         }
1099         if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi)))
1100                 return -EFAULT;
1101         return 0;
1102 }
1103
1104 /* --------------------------------------------------------------------- */
1105
1106 static const struct net_device_ops baycom_netdev_ops = {
1107         .ndo_open            = epp_open,
1108         .ndo_stop            = epp_close,
1109         .ndo_do_ioctl        = baycom_ioctl,
1110         .ndo_start_xmit      = baycom_send_packet,
1111         .ndo_set_mac_address = baycom_set_mac_address,
1112 };
1113
1114 /*
1115  * Check for a network adaptor of this type, and return '0' if one exists.
1116  * If dev->base_addr == 0, probe all likely locations.
1117  * If dev->base_addr == 1, always return failure.
1118  * If dev->base_addr == 2, allocate space for the device and return success
1119  * (detachable devices only).
1120  */
1121 static void baycom_probe(struct net_device *dev)
1122 {
1123         const struct hdlcdrv_channel_params dflt_ch_params = {
1124                 20, 2, 10, 40, 0
1125         };
1126         struct baycom_state *bc;
1127
1128         /*
1129          * not a real probe! only initialize data structures
1130          */
1131         bc = netdev_priv(dev);
1132         /*
1133          * initialize the baycom_state struct
1134          */
1135         bc->ch_params = dflt_ch_params;
1136         bc->ptt_keyed = 0;
1137
1138         /*
1139          * initialize the device struct
1140          */
1141
1142         /* Fill in the fields of the device structure */
1143         bc->skb = NULL;
1144
1145         dev->netdev_ops = &baycom_netdev_ops;
1146         dev->header_ops = &ax25_header_ops;
1147
1148         dev->type = ARPHRD_AX25;           /* AF_AX25 device */
1149         dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1150         dev->mtu = AX25_DEF_PACLEN;        /* eth_mtu is the default */
1151         dev->addr_len = AX25_ADDR_LEN;     /* sizeof an ax.25 address */
1152         memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1153         memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
1154         dev->tx_queue_len = 16;
1155
1156         /* New style flags */
1157         dev->flags = 0;
1158 }
1159
1160 /* --------------------------------------------------------------------- */
1161
1162 /*
1163  * command line settable parameters
1164  */
1165 static const char *mode[NR_PORTS] = { "", };
1166 static int iobase[NR_PORTS] = { 0x378, };
1167
1168 module_param_array(mode, charp, NULL, 0);
1169 MODULE_PARM_DESC(mode, "baycom operating mode");
1170 module_param_array(iobase, int, NULL, 0);
1171 MODULE_PARM_DESC(iobase, "baycom io base address");
1172
1173 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1174 MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1175 MODULE_LICENSE("GPL");
1176
1177 /* --------------------------------------------------------------------- */
1178
1179 static void __init baycom_epp_dev_setup(struct net_device *dev)
1180 {
1181         struct baycom_state *bc = netdev_priv(dev);
1182
1183         /*
1184          * initialize part of the baycom_state struct
1185          */
1186         bc->dev = dev;
1187         bc->magic = BAYCOM_MAGIC;
1188         bc->cfg.fclk = 19666600;
1189         bc->cfg.bps = 9600;
1190         /*
1191          * initialize part of the device struct
1192          */
1193         baycom_probe(dev);
1194 }
1195
1196 static int __init init_baycomepp(void)
1197 {
1198         int i, found = 0;
1199         char set_hw = 1;
1200
1201         printk(bc_drvinfo);
1202         /*
1203          * register net devices
1204          */
1205         for (i = 0; i < NR_PORTS; i++) {
1206                 struct net_device *dev;
1207
1208                 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
1209                                    baycom_epp_dev_setup);
1210
1211                 if (!dev) {
1212                         printk(KERN_WARNING "bce%d : out of memory\n", i);
1213                         return found ? 0 : -ENOMEM;
1214                 }
1215
1216                 sprintf(dev->name, "bce%d", i);
1217                 dev->base_addr = iobase[i];
1218
1219                 if (!mode[i])
1220                         set_hw = 0;
1221                 if (!set_hw)
1222                         iobase[i] = 0;
1223
1224                 if (register_netdev(dev)) {
1225                         printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1226                         free_netdev(dev);
1227                         break;
1228                 }
1229                 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1230                         set_hw = 0;
1231                 baycom_device[i] = dev;
1232                 found++;
1233         }
1234
1235         return found ? 0 : -ENXIO;
1236 }
1237
1238 static void __exit cleanup_baycomepp(void)
1239 {
1240         int i;
1241
1242         for(i = 0; i < NR_PORTS; i++) {
1243                 struct net_device *dev = baycom_device[i];
1244
1245                 if (dev) {
1246                         struct baycom_state *bc = netdev_priv(dev);
1247                         if (bc->magic == BAYCOM_MAGIC) {
1248                                 unregister_netdev(dev);
1249                                 free_netdev(dev);
1250                         } else
1251                                 printk(paranoia_str, "cleanup_module");
1252                 }
1253         }
1254 }
1255
1256 module_init(init_baycomepp);
1257 module_exit(cleanup_baycomepp);
1258
1259 /* --------------------------------------------------------------------- */
1260
1261 #ifndef MODULE
1262
1263 /*
1264  * format: baycom_epp=io,mode
1265  * mode: fpga config options
1266  */
1267
1268 static int __init baycom_epp_setup(char *str)
1269 {
1270         static unsigned __initdata nr_dev = 0;
1271         int ints[2];
1272
1273         if (nr_dev >= NR_PORTS)
1274                 return 0;
1275         str = get_options(str, 2, ints);
1276         if (ints[0] < 1)
1277                 return 0;
1278         mode[nr_dev] = str;
1279         iobase[nr_dev] = ints[1];
1280         nr_dev++;
1281         return 1;
1282 }
1283
1284 __setup("baycom_epp=", baycom_epp_setup);
1285
1286 #endif /* MODULE */
1287 /* --------------------------------------------------------------------- */