SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/isdn/hisax/elsa_ser.c

   1 /* $Id: elsa_ser.c,v 2.14.2.3 2004/02/11 13:21:33 keil Exp $
   2  *
   3  * stuff for the serial modem on ELSA cards
   4  *
   5  * This software may be used and distributed according to the terms
   6  * of the GNU General Public License, incorporated herein by reference.
   7  *
   8  */
   9
  10 #include <linux/serial.h>
  11 #include <linux/serial_reg.h>
  12 #include <linux/slab.h>
  13
  14 #define MAX_MODEM_BUF   256
  15 #define WAKEUP_CHARS    (MAX_MODEM_BUF/2)
  16 #define RS_ISR_PASS_LIMIT 256
  17 #define BASE_BAUD ( 1843200 / 16 )
  18
  19 //#define SERIAL_DEBUG_OPEN 1
  20 //#define SERIAL_DEBUG_INTR 1
  21 //#define SERIAL_DEBUG_FLOW 1
  22 #undef SERIAL_DEBUG_OPEN
  23 #undef SERIAL_DEBUG_INTR
  24 #undef SERIAL_DEBUG_FLOW
  25 #undef SERIAL_DEBUG_REG
  26 //#define SERIAL_DEBUG_REG 1
  27
  28 #ifdef SERIAL_DEBUG_REG
  29 static u_char deb[32];
  30 const char *ModemIn[] = {"RBR","IER","IIR","LCR","MCR","LSR","MSR","SCR"};
  31 const char *ModemOut[] = {"THR","IER","FCR","LCR","MCR","LSR","MSR","SCR"};
  32 #endif
  33
  34 static char *MInit_1 = "AT&F&C1E0&D2\r\0";
  35 static char *MInit_2 = "ATL2M1S64=13\r\0";
  36 static char *MInit_3 = "AT+FCLASS=0\r\0";
  37 static char *MInit_4 = "ATV1S2=128X1\r\0";
  38 static char *MInit_5 = "AT\\V8\\N3\r\0";
  39 static char *MInit_6 = "ATL0M0&G0%E1\r\0";
  40 static char *MInit_7 = "AT%L1%M0%C3\r\0";
  41
  42 static char *MInit_speed28800 = "AT%G0%B28800\r\0";
  43
  44 static char *MInit_dialout = "ATs7=60 x1 d\r\0";
  45 static char *MInit_dialin = "ATs7=60 x1 a\r\0";
  46
  47
  48 static inline unsigned int serial_in(struct IsdnCardState *cs, int offset)
  49 {
  50 #ifdef SERIAL_DEBUG_REG
  51         u_int val = inb(cs->hw.elsa.base + 8 + offset);
  52         debugl1(cs,"in   %s %02x",ModemIn[offset], val);
  53         return(val);
  54 #else
  55         return inb(cs->hw.elsa.base + 8 + offset);
  56 #endif
  57 }
  58
  59 static inline unsigned int serial_inp(struct IsdnCardState *cs, int offset)
  60 {
  61 #ifdef SERIAL_DEBUG_REG
  62 #ifdef ELSA_SERIAL_NOPAUSE_IO
  63         u_int val = inb(cs->hw.elsa.base + 8 + offset);
  64         debugl1(cs,"inp  %s %02x",ModemIn[offset], val);
  65 #else
  66         u_int val = inb_p(cs->hw.elsa.base + 8 + offset);
  67         debugl1(cs,"inP  %s %02x",ModemIn[offset], val);
  68 #endif
  69         return(val);
  70 #else
  71 #ifdef ELSA_SERIAL_NOPAUSE_IO
  72         return inb(cs->hw.elsa.base + 8 + offset);
  73 #else
  74         return inb_p(cs->hw.elsa.base + 8 + offset);
  75 #endif
  76 #endif
  77 }
  78
  79 static inline void serial_out(struct IsdnCardState *cs, int offset, int value)
  80 {
  81 #ifdef SERIAL_DEBUG_REG
  82         debugl1(cs,"out  %s %02x",ModemOut[offset], value);
  83 #endif
  84         outb(value, cs->hw.elsa.base + 8 + offset);
  85 }
  86
  87 static inline void serial_outp(struct IsdnCardState *cs, int offset,
  88                                int value)
  89 {
  90 #ifdef SERIAL_DEBUG_REG
  91 #ifdef ELSA_SERIAL_NOPAUSE_IO
  92         debugl1(cs,"outp %s %02x",ModemOut[offset], value);
  93 #else
  94         debugl1(cs,"outP %s %02x",ModemOut[offset], value);
  95 #endif
  96 #endif
  97 #ifdef ELSA_SERIAL_NOPAUSE_IO
  98         outb(value, cs->hw.elsa.base + 8 + offset);
  99 #else
 100         outb_p(value, cs->hw.elsa.base + 8 + offset);
 101 #endif
 102 }
 103
 104 /*
 105  * This routine is called to set the UART divisor registers to match
 106  * the specified baud rate for a serial port.
 107  */
 108 static void change_speed(struct IsdnCardState *cs, int baud)
 109 {
 110         int     quot = 0, baud_base;
 111         unsigned cval, fcr = 0;
 112         int     bits;
 113
 114
 115         /* byte size and parity */
 116         cval = 0x03; bits = 10;
 117         /* Determine divisor based on baud rate */
 118         baud_base = BASE_BAUD;
 119         quot = baud_base / baud;
 120         /* If the quotient is ever zero, default to 9600 bps */
 121         if (!quot)
 122                 quot = baud_base / 9600;
 123
 124         /* Set up FIFO's */
 125         if ((baud_base / quot) < 2400)
 126                 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
 127         else
 128                 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
 129         serial_outp(cs, UART_FCR, fcr);
 130         /* CTS flow control flag and modem status interrupts */
 131         cs->hw.elsa.IER &= ~UART_IER_MSI;
 132         cs->hw.elsa.IER |= UART_IER_MSI;
 133         serial_outp(cs, UART_IER, cs->hw.elsa.IER);
 134
 135         debugl1(cs,"modem quot=0x%x", quot);
 136         serial_outp(cs, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
 137         serial_outp(cs, UART_DLL, quot & 0xff);         /* LS of divisor */
 138         serial_outp(cs, UART_DLM, quot >> 8);           /* MS of divisor */
 139         serial_outp(cs, UART_LCR, cval);                /* reset DLAB */
 140         serial_inp(cs, UART_RX);
 141 }
 142
 143 static int mstartup(struct IsdnCardState *cs)
 144 {
 145         int     retval=0;
 146
 147         /*
 148          * Clear the FIFO buffers and disable them
 149          * (they will be reenabled in change_speed())
 150          */
 151         serial_outp(cs, UART_FCR, (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT));
 152
 153         /*
 154          * At this point there's no way the LSR could still be 0xFF;
 155          * if it is, then bail out, because there's likely no UART
 156          * here.
 157          */
 158         if (serial_inp(cs, UART_LSR) == 0xff) {
 159                 retval = -ENODEV;
 160                 goto errout;
 161         }
 162
 163         /*
 164          * Clear the interrupt registers.
 165          */
 166         (void) serial_inp(cs, UART_RX);
 167         (void) serial_inp(cs, UART_IIR);
 168         (void) serial_inp(cs, UART_MSR);
 169
 170         /*
 171          * Now, initialize the UART
 172          */
 173         serial_outp(cs, UART_LCR, UART_LCR_WLEN8);      /* reset DLAB */
 174
 175         cs->hw.elsa.MCR = 0;
 176         cs->hw.elsa.MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
 177         serial_outp(cs, UART_MCR, cs->hw.elsa.MCR);
 178
 179         /*
 180          * Finally, enable interrupts
 181          */
 182         cs->hw.elsa.IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
 183         serial_outp(cs, UART_IER, cs->hw.elsa.IER);     /* enable interrupts */
 184
 185         /*
 186          * And clear the interrupt registers again for luck.
 187          */
 188         (void)serial_inp(cs, UART_LSR);
 189         (void)serial_inp(cs, UART_RX);
 190         (void)serial_inp(cs, UART_IIR);
 191         (void)serial_inp(cs, UART_MSR);
 192
 193         cs->hw.elsa.transcnt = cs->hw.elsa.transp = 0;
 194         cs->hw.elsa.rcvcnt = cs->hw.elsa.rcvp =0;
 195
 196         /*
 197          * and set the speed of the serial port
 198          */
 199         change_speed(cs, BASE_BAUD);
 200         cs->hw.elsa.MFlag = 1;
 201 errout:
 202         return retval;
 203 }
 204
 205 /*
 206  * This routine will shutdown a serial port; interrupts are disabled, and
 207  * DTR is dropped if the hangup on close termio flag is on.
 208  */
 209 static void mshutdown(struct IsdnCardState *cs)
 210 {
 211
 212 #ifdef SERIAL_DEBUG_OPEN
 213         printk(KERN_DEBUG"Shutting down serial ....");
 214 #endif
 215
 216         /*
 217          * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
 218          * here so the queue might never be waken up
 219          */
 220
 221         cs->hw.elsa.IER = 0;
 222         serial_outp(cs, UART_IER, 0x00);        /* disable all intrs */
 223         cs->hw.elsa.MCR &= ~UART_MCR_OUT2;
 224
 225         /* disable break condition */
 226         serial_outp(cs, UART_LCR, serial_inp(cs, UART_LCR) & ~UART_LCR_SBC);
 227
 228         cs->hw.elsa.MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
 229         serial_outp(cs, UART_MCR, cs->hw.elsa.MCR);
 230
 231         /* disable FIFO's */
 232         serial_outp(cs, UART_FCR, (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT));
 233         serial_inp(cs, UART_RX);    /* read data port to reset things */
 234
 235 #ifdef SERIAL_DEBUG_OPEN
 236         printk(" done\n");
 237 #endif
 238 }
 239
 240 static inline int
 241 write_modem(struct BCState *bcs) {
 242         int ret=0;
 243         struct IsdnCardState *cs = bcs->cs;
 244         int count, len, fp;
 245
 246         if (!bcs->tx_skb)
 247                 return 0;
 248         if (bcs->tx_skb->len <= 0)
 249                 return 0;
 250         len = bcs->tx_skb->len;
 251         if (len > MAX_MODEM_BUF - cs->hw.elsa.transcnt)
 252                 len = MAX_MODEM_BUF - cs->hw.elsa.transcnt;
 253         fp = cs->hw.elsa.transcnt + cs->hw.elsa.transp;
 254         fp &= (MAX_MODEM_BUF -1);
 255         count = len;
 256         if (count > MAX_MODEM_BUF - fp) {
 257                 count = MAX_MODEM_BUF - fp;
 258                 skb_copy_from_linear_data(bcs->tx_skb,
 259                                           cs->hw.elsa.transbuf + fp, count);
 260                 skb_pull(bcs->tx_skb, count);
 261                 cs->hw.elsa.transcnt += count;
 262                 ret = count;
 263                 count = len - count;
 264                 fp = 0;
 265         }
 266         skb_copy_from_linear_data(bcs->tx_skb,
 267                                   cs->hw.elsa.transbuf + fp, count);
 268         skb_pull(bcs->tx_skb, count);
 269         cs->hw.elsa.transcnt += count;
 270         ret += count;
 271
 272         if (cs->hw.elsa.transcnt &&
 273             !(cs->hw.elsa.IER & UART_IER_THRI)) {
 274                         cs->hw.elsa.IER |= UART_IER_THRI;
 275                 serial_outp(cs, UART_IER, cs->hw.elsa.IER);
 276         }
 277         return(ret);
 278 }
 279
 280 static inline void
 281 modem_fill(struct BCState *bcs) {
 282
 283         if (bcs->tx_skb) {
 284                 if (bcs->tx_skb->len) {
 285                         write_modem(bcs);
 286                         return;
 287                 } else {
 288                         if (test_bit(FLG_LLI_L1WAKEUP,&bcs->st->lli.flag) &&
 289                                 (PACKET_NOACK != bcs->tx_skb->pkt_type)) {
 290                                 u_long  flags;
 291                                 spin_lock_irqsave(&bcs->aclock, flags);
 292                                 bcs->ackcnt += bcs->hw.hscx.count;
 293                                 spin_unlock_irqrestore(&bcs->aclock, flags);
 294                                 schedule_event(bcs, B_ACKPENDING);
 295                         }
 296                         dev_kfree_skb_any(bcs->tx_skb);
 297                         bcs->tx_skb = NULL;
 298                 }
 299         }
 300         if ((bcs->tx_skb = skb_dequeue(&bcs->squeue))) {
 301                 bcs->hw.hscx.count = 0;
 302                 test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
 303                 write_modem(bcs);
 304         } else {
 305                 test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
 306                 schedule_event(bcs, B_XMTBUFREADY);
 307         }
 308 }
 309
 310 static inline void receive_chars(struct IsdnCardState *cs,
 311                                  int *status)
 312 {
 313         unsigned char ch;
 314         struct sk_buff *skb;
 315
 316         do {
 317                 ch = serial_in(cs, UART_RX);
 318                 if (cs->hw.elsa.rcvcnt >= MAX_MODEM_BUF)
 319                         break;
 320                 cs->hw.elsa.rcvbuf[cs->hw.elsa.rcvcnt++] = ch;
 321 #ifdef SERIAL_DEBUG_INTR
 322                 printk("DR%02x:%02x...", ch, *status);
 323 #endif
 324                 if (*status & (UART_LSR_BI | UART_LSR_PE |
 325                                UART_LSR_FE | UART_LSR_OE)) {
 326
 327 #ifdef SERIAL_DEBUG_INTR
 328                         printk("handling exept....");
 329 #endif
 330                 }
 331                 *status = serial_inp(cs, UART_LSR);
 332         } while (*status & UART_LSR_DR);
 333         if (cs->hw.elsa.MFlag == 2) {
 334                 if (!(skb = dev_alloc_skb(cs->hw.elsa.rcvcnt)))
 335                         printk(KERN_WARNING "ElsaSER: receive out of memory\n");
 336                 else {
 337                         memcpy(skb_put(skb, cs->hw.elsa.rcvcnt), cs->hw.elsa.rcvbuf,
 338                                 cs->hw.elsa.rcvcnt);
 339                         skb_queue_tail(& cs->hw.elsa.bcs->rqueue, skb);
 340                 }
 341                 schedule_event(cs->hw.elsa.bcs, B_RCVBUFREADY);
 342         } else {
 343                 char tmp[128];
 344                 char *t = tmp;
 345
 346                 t += sprintf(t, "modem read cnt %d", cs->hw.elsa.rcvcnt);
 347                 QuickHex(t, cs->hw.elsa.rcvbuf, cs->hw.elsa.rcvcnt);
 348                 debugl1(cs, tmp);
 349         }
 350         cs->hw.elsa.rcvcnt = 0;
 351 }
 352
 353 static inline void transmit_chars(struct IsdnCardState *cs, int *intr_done)
 354 {
 355         int count;
 356
 357         debugl1(cs, "transmit_chars: p(%x) cnt(%x)", cs->hw.elsa.transp,
 358                 cs->hw.elsa.transcnt);
 359
 360         if (cs->hw.elsa.transcnt <= 0) {
 361                 cs->hw.elsa.IER &= ~UART_IER_THRI;
 362                 serial_out(cs, UART_IER, cs->hw.elsa.IER);
 363                 return;
 364         }
 365         count = 16;
 366         do {
 367                 serial_outp(cs, UART_TX, cs->hw.elsa.transbuf[cs->hw.elsa.transp++]);
 368                 if (cs->hw.elsa.transp >= MAX_MODEM_BUF)
 369                         cs->hw.elsa.transp=0;
 370                 if (--cs->hw.elsa.transcnt <= 0)
 371                         break;
 372         } while (--count > 0);
 373         if ((cs->hw.elsa.transcnt < WAKEUP_CHARS) && (cs->hw.elsa.MFlag==2))
 374                 modem_fill(cs->hw.elsa.bcs);
 375
 376 #ifdef SERIAL_DEBUG_INTR
 377         printk("THRE...");
 378 #endif
 379         if (intr_done)
 380                 *intr_done = 0;
 381         if (cs->hw.elsa.transcnt <= 0) {
 382                 cs->hw.elsa.IER &= ~UART_IER_THRI;
 383                 serial_outp(cs, UART_IER, cs->hw.elsa.IER);
 384         }
 385 }
 386
 387
 388 static void rs_interrupt_elsa(struct IsdnCardState *cs)
 389 {
 390         int status, iir, msr;
 391         int pass_counter = 0;
 392
 393 #ifdef SERIAL_DEBUG_INTR
 394         printk(KERN_DEBUG "rs_interrupt_single(%d)...", cs->irq);
 395 #endif
 396
 397         do {
 398                 status = serial_inp(cs, UART_LSR);
 399                 debugl1(cs,"rs LSR %02x", status);
 400 #ifdef SERIAL_DEBUG_INTR
 401                 printk("status = %x...", status);
 402 #endif
 403                 if (status & UART_LSR_DR)
 404                         receive_chars(cs, &status);
 405                 if (status & UART_LSR_THRE)
 406                         transmit_chars(cs, NULL);
 407                 if (pass_counter++ > RS_ISR_PASS_LIMIT) {
 408                         printk("rs_single loop break.\n");
 409                         break;
 410                 }
 411                 iir = serial_inp(cs, UART_IIR);
 412                 debugl1(cs,"rs IIR %02x", iir);
 413                 if ((iir & 0xf) == 0) {
 414                         msr = serial_inp(cs, UART_MSR);
 415                         debugl1(cs,"rs MSR %02x", msr);
 416                 }
 417         } while (!(iir & UART_IIR_NO_INT));
 418 #ifdef SERIAL_DEBUG_INTR
 419         printk("end.\n");
 420 #endif
 421 }
 422
 423 extern int open_hscxstate(struct IsdnCardState *cs, struct BCState *bcs);
 424 extern void modehscx(struct BCState *bcs, int mode, int bc);
 425 extern void hscx_l2l1(struct PStack *st, int pr, void *arg);
 426
 427 static void
 428 close_elsastate(struct BCState *bcs)
 429 {
 430         modehscx(bcs, 0, bcs->channel);
 431         if (test_and_clear_bit(BC_FLG_INIT, &bcs->Flag)) {
 432                 if (bcs->hw.hscx.rcvbuf) {
 433                         if (bcs->mode != L1_MODE_MODEM)
 434                                 kfree(bcs->hw.hscx.rcvbuf);
 435                         bcs->hw.hscx.rcvbuf = NULL;
 436                 }
 437                 skb_queue_purge(&bcs->rqueue);
 438                 skb_queue_purge(&bcs->squeue);
 439                 if (bcs->tx_skb) {
 440                         dev_kfree_skb_any(bcs->tx_skb);
 441                         bcs->tx_skb = NULL;
 442                         test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
 443                 }
 444         }
 445 }
 446
 447 static void
 448 modem_write_cmd(struct IsdnCardState *cs, u_char *buf, int len) {
 449         int count, fp;
 450         u_char *msg = buf;
 451
 452         if (!len)
 453                 return;
 454         if (len > (MAX_MODEM_BUF - cs->hw.elsa.transcnt)) {
 455                 return;
 456         }
 457         fp = cs->hw.elsa.transcnt + cs->hw.elsa.transp;
 458         fp &= (MAX_MODEM_BUF -1);
 459         count = len;
 460         if (count > MAX_MODEM_BUF - fp) {
 461                 count = MAX_MODEM_BUF - fp;
 462                 memcpy(cs->hw.elsa.transbuf + fp, msg, count);
 463                 cs->hw.elsa.transcnt += count;
 464                 msg += count;
 465                 count = len - count;
 466                 fp = 0;
 467         }
 468         memcpy(cs->hw.elsa.transbuf + fp, msg, count);
 469         cs->hw.elsa.transcnt += count;
 470         if (cs->hw.elsa.transcnt &&
 471             !(cs->hw.elsa.IER & UART_IER_THRI)) {
 472                 cs->hw.elsa.IER |= UART_IER_THRI;
 473                 serial_outp(cs, UART_IER, cs->hw.elsa.IER);
 474         }
 475 }
 476
 477 static void
 478 modem_set_init(struct IsdnCardState *cs) {
 479         int timeout;
 480
 481 #define RCV_DELAY 20
 482         modem_write_cmd(cs, MInit_1, strlen(MInit_1));
 483         timeout = 1000;
 484         while(timeout-- && cs->hw.elsa.transcnt)
 485                 udelay(1000);
 486         debugl1(cs, "msi tout=%d", timeout);
 487         mdelay(RCV_DELAY);
 488         modem_write_cmd(cs, MInit_2, strlen(MInit_2));
 489         timeout = 1000;
 490         while(timeout-- && cs->hw.elsa.transcnt)
 491                 udelay(1000);
 492         debugl1(cs, "msi tout=%d", timeout);
 493         mdelay(RCV_DELAY);
 494         modem_write_cmd(cs, MInit_3, strlen(MInit_3));
 495         timeout = 1000;
 496         while(timeout-- && cs->hw.elsa.transcnt)
 497                 udelay(1000);
 498         debugl1(cs, "msi tout=%d", timeout);
 499         mdelay(RCV_DELAY);
 500         modem_write_cmd(cs, MInit_4, strlen(MInit_4));
 501         timeout = 1000;
 502         while(timeout-- && cs->hw.elsa.transcnt)
 503                 udelay(1000);
 504         debugl1(cs, "msi tout=%d", timeout);
 505         mdelay(RCV_DELAY);
 506         modem_write_cmd(cs, MInit_5, strlen(MInit_5));
 507         timeout = 1000;
 508         while(timeout-- && cs->hw.elsa.transcnt)
 509                 udelay(1000);
 510         debugl1(cs, "msi tout=%d", timeout);
 511         mdelay(RCV_DELAY);
 512         modem_write_cmd(cs, MInit_6, strlen(MInit_6));
 513         timeout = 1000;
 514         while(timeout-- && cs->hw.elsa.transcnt)
 515                 udelay(1000);
 516         debugl1(cs, "msi tout=%d", timeout);
 517         mdelay(RCV_DELAY);
 518         modem_write_cmd(cs, MInit_7, strlen(MInit_7));
 519         timeout = 1000;
 520         while(timeout-- && cs->hw.elsa.transcnt)
 521                 udelay(1000);
 522         debugl1(cs, "msi tout=%d", timeout);
 523         mdelay(RCV_DELAY);
 524 }
 525
 526 static void
 527 modem_set_dial(struct IsdnCardState *cs, int outgoing) {
 528         int timeout;
 529 #define RCV_DELAY 20
 530
 531         modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800));
 532         timeout = 1000;
 533         while(timeout-- && cs->hw.elsa.transcnt)
 534                 udelay(1000);
 535         debugl1(cs, "msi tout=%d", timeout);
 536         mdelay(RCV_DELAY);
 537         if (outgoing)
 538                 modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout));
 539         else
 540                 modem_write_cmd(cs, MInit_dialin, strlen(MInit_dialin));
 541         timeout = 1000;
 542         while(timeout-- && cs->hw.elsa.transcnt)
 543                 udelay(1000);
 544         debugl1(cs, "msi tout=%d", timeout);
 545         mdelay(RCV_DELAY);
 546 }
 547
 548 static void
 549 modem_l2l1(struct PStack *st, int pr, void *arg)
 550 {
 551         struct BCState *bcs = st->l1.bcs;
 552         struct sk_buff *skb = arg;
 553         u_long flags;
 554
 555         if (pr == (PH_DATA | REQUEST)) {
 556                 spin_lock_irqsave(&bcs->cs->lock, flags);
 557                 if (bcs->tx_skb) {
 558                         skb_queue_tail(&bcs->squeue, skb);
 559                 } else {
 560                         bcs->tx_skb = skb;
 561                         test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
 562                         bcs->hw.hscx.count = 0;
 563                         write_modem(bcs);
 564                 }
 565                 spin_unlock_irqrestore(&bcs->cs->lock, flags);
 566         } else if (pr == (PH_ACTIVATE | REQUEST)) {
 567                 test_and_set_bit(BC_FLG_ACTIV, &bcs->Flag);
 568                 st->l1.l1l2(st, PH_ACTIVATE | CONFIRM, NULL);
 569                 set_arcofi(bcs->cs, st->l1.bc);
 570                 mstartup(bcs->cs);
 571                 modem_set_dial(bcs->cs, test_bit(FLG_ORIG, &st->l2.flag));
 572                 bcs->cs->hw.elsa.MFlag=2;
 573         } else if (pr == (PH_DEACTIVATE | REQUEST)) {
 574                 test_and_clear_bit(BC_FLG_ACTIV, &bcs->Flag);
 575                 bcs->cs->dc.isac.arcofi_bc = st->l1.bc;
 576                 arcofi_fsm(bcs->cs, ARCOFI_START, &ARCOFI_XOP_0);
 577                 interruptible_sleep_on(&bcs->cs->dc.isac.arcofi_wait);
 578                 bcs->cs->hw.elsa.MFlag=1;
 579         } else {
 580                 printk(KERN_WARNING"ElsaSer: unknown pr %x\n", pr);
 581         }
 582 }
 583
 584 static int
 585 setstack_elsa(struct PStack *st, struct BCState *bcs)
 586 {
 587
 588         bcs->channel = st->l1.bc;
 589         switch (st->l1.mode) {
 590                 case L1_MODE_HDLC:
 591                 case L1_MODE_TRANS:
 592                         if (open_hscxstate(st->l1.hardware, bcs))
 593                                 return (-1);
 594                         st->l2.l2l1 = hscx_l2l1;
 595                         break;
 596                 case L1_MODE_MODEM:
 597                         bcs->mode = L1_MODE_MODEM;
 598                         if (!test_and_set_bit(BC_FLG_INIT, &bcs->Flag)) {
 599                                 bcs->hw.hscx.rcvbuf = bcs->cs->hw.elsa.rcvbuf;
 600                                 skb_queue_head_init(&bcs->rqueue);
 601                                 skb_queue_head_init(&bcs->squeue);
 602                         }
 603                         bcs->tx_skb = NULL;
 604                         test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
 605                         bcs->event = 0;
 606                         bcs->hw.hscx.rcvidx = 0;
 607                         bcs->tx_cnt = 0;
 608                         bcs->cs->hw.elsa.bcs = bcs;
 609                         st->l2.l2l1 = modem_l2l1;
 610                         break;
 611         }
 612         st->l1.bcs = bcs;
 613         setstack_manager(st);
 614         bcs->st = st;
 615         setstack_l1_B(st);
 616         return (0);
 617 }
 618
 619 static void
 620 init_modem(struct IsdnCardState *cs) {
 621
 622         cs->bcs[0].BC_SetStack = setstack_elsa;
 623         cs->bcs[1].BC_SetStack = setstack_elsa;
 624         cs->bcs[0].BC_Close = close_elsastate;
 625         cs->bcs[1].BC_Close = close_elsastate;
 626         if (!(cs->hw.elsa.rcvbuf = kmalloc(MAX_MODEM_BUF,
 627                 GFP_ATOMIC))) {
 628                 printk(KERN_WARNING
 629                         "Elsa: No modem mem hw.elsa.rcvbuf\n");
 630                 return;
 631         }
 632         if (!(cs->hw.elsa.transbuf = kmalloc(MAX_MODEM_BUF,
 633                 GFP_ATOMIC))) {
 634                 printk(KERN_WARNING
 635                         "Elsa: No modem mem hw.elsa.transbuf\n");
 636                 kfree(cs->hw.elsa.rcvbuf);
 637                 cs->hw.elsa.rcvbuf = NULL;
 638                 return;
 639         }
 640         if (mstartup(cs)) {
 641                 printk(KERN_WARNING "Elsa: problem startup modem\n");
 642         }
 643         modem_set_init(cs);
 644 }
 645
 646 static void
 647 release_modem(struct IsdnCardState *cs) {
 648
 649         cs->hw.elsa.MFlag = 0;
 650         if (cs->hw.elsa.transbuf) {
 651                 if (cs->hw.elsa.rcvbuf) {
 652                         mshutdown(cs);
 653                         kfree(cs->hw.elsa.rcvbuf);
 654                         cs->hw.elsa.rcvbuf = NULL;
 655                 }
 656                 kfree(cs->hw.elsa.transbuf);
 657                 cs->hw.elsa.transbuf = NULL;
 658         }
 659 }