include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit...
[safe/jmp/linux-2.6] / drivers / hwmon / lm70.c
1 /*
2  * lm70.c
3  *
4  * The LM70 is a temperature sensor chip from National Semiconductor (NS).
5  * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
6  *
7  * The LM70 communicates with a host processor via an SPI/Microwire Bus
8  * interface. The complete datasheet is available at National's website
9  * here:
10  * http://www.national.com/pf/LM/LM70.html
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License as published by
14  * the Free Software Foundation; either version 2 of the License, or
15  * (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25  */
26
27 #include <linux/init.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/device.h>
31 #include <linux/err.h>
32 #include <linux/sysfs.h>
33 #include <linux/hwmon.h>
34 #include <linux/mutex.h>
35 #include <linux/mod_devicetable.h>
36 #include <linux/spi/spi.h>
37 #include <linux/slab.h>
38
39
40 #define DRVNAME         "lm70"
41
42 #define LM70_CHIP_LM70          0       /* original NS LM70 */
43 #define LM70_CHIP_TMP121        1       /* TI TMP121/TMP123 */
44
45 struct lm70 {
46         struct device *hwmon_dev;
47         struct mutex lock;
48         unsigned int chip;
49 };
50
51 /* sysfs hook function */
52 static ssize_t lm70_sense_temp(struct device *dev,
53                 struct device_attribute *attr, char *buf)
54 {
55         struct spi_device *spi = to_spi_device(dev);
56         int status, val = 0;
57         u8 rxbuf[2];
58         s16 raw=0;
59         struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
60
61         if (mutex_lock_interruptible(&p_lm70->lock))
62                 return -ERESTARTSYS;
63
64         /*
65          * spi_read() requires a DMA-safe buffer; so we use
66          * spi_write_then_read(), transmitting 0 bytes.
67          */
68         status = spi_write_then_read(spi, NULL, 0, &rxbuf[0], 2);
69         if (status < 0) {
70                 printk(KERN_WARNING
71                 "spi_write_then_read failed with status %d\n", status);
72                 goto out;
73         }
74         raw = (rxbuf[0] << 8) + rxbuf[1];
75         dev_dbg(dev, "rxbuf[0] : 0x%02x rxbuf[1] : 0x%02x raw=0x%04x\n",
76                 rxbuf[0], rxbuf[1], raw);
77
78         /*
79          * LM70:
80          * The "raw" temperature read into rxbuf[] is a 16-bit signed 2's
81          * complement value. Only the MSB 11 bits (1 sign + 10 temperature
82          * bits) are meaningful; the LSB 5 bits are to be discarded.
83          * See the datasheet.
84          *
85          * Further, each bit represents 0.25 degrees Celsius; so, multiply
86          * by 0.25. Also multiply by 1000 to represent in millidegrees
87          * Celsius.
88          * So it's equivalent to multiplying by 0.25 * 1000 = 250.
89          *
90          * TMP121/TMP123:
91          * 13 bits of 2's complement data, discard LSB 3 bits,
92          * resolution 0.0625 degrees celsius.
93          */
94         switch (p_lm70->chip) {
95         case LM70_CHIP_LM70:
96                 val = ((int)raw / 32) * 250;
97                 break;
98
99         case LM70_CHIP_TMP121:
100                 val = ((int)raw / 8) * 625 / 10;
101                 break;
102         }
103
104         status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
105 out:
106         mutex_unlock(&p_lm70->lock);
107         return status;
108 }
109
110 static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL);
111
112 static ssize_t lm70_show_name(struct device *dev, struct device_attribute
113                               *devattr, char *buf)
114 {
115         struct lm70 *p_lm70 = dev_get_drvdata(dev);
116         int ret;
117
118         switch (p_lm70->chip) {
119         case LM70_CHIP_LM70:
120                 ret = sprintf(buf, "lm70\n");
121                 break;
122         case LM70_CHIP_TMP121:
123                 ret = sprintf(buf, "tmp121\n");
124                 break;
125         default:
126                 ret = -EINVAL;
127         }
128         return ret;
129 }
130
131 static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL);
132
133 /*----------------------------------------------------------------------*/
134
135 static int __devinit lm70_probe(struct spi_device *spi)
136 {
137         int chip = spi_get_device_id(spi)->driver_data;
138         struct lm70 *p_lm70;
139         int status;
140
141         /* signaling is SPI_MODE_0 for both LM70 and TMP121 */
142         if (spi->mode & (SPI_CPOL | SPI_CPHA))
143                 return -EINVAL;
144
145         /* 3-wire link (shared SI/SO) for LM70 */
146         if (chip == LM70_CHIP_LM70 && !(spi->mode & SPI_3WIRE))
147                 return -EINVAL;
148
149         /* NOTE:  we assume 8-bit words, and convert to 16 bits manually */
150
151         p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL);
152         if (!p_lm70)
153                 return -ENOMEM;
154
155         mutex_init(&p_lm70->lock);
156         p_lm70->chip = chip;
157
158         /* sysfs hook */
159         p_lm70->hwmon_dev = hwmon_device_register(&spi->dev);
160         if (IS_ERR(p_lm70->hwmon_dev)) {
161                 dev_dbg(&spi->dev, "hwmon_device_register failed.\n");
162                 status = PTR_ERR(p_lm70->hwmon_dev);
163                 goto out_dev_reg_failed;
164         }
165         dev_set_drvdata(&spi->dev, p_lm70);
166
167         if ((status = device_create_file(&spi->dev, &dev_attr_temp1_input))
168          || (status = device_create_file(&spi->dev, &dev_attr_name))) {
169                 dev_dbg(&spi->dev, "device_create_file failure.\n");
170                 goto out_dev_create_file_failed;
171         }
172
173         return 0;
174
175 out_dev_create_file_failed:
176         device_remove_file(&spi->dev, &dev_attr_temp1_input);
177         hwmon_device_unregister(p_lm70->hwmon_dev);
178 out_dev_reg_failed:
179         dev_set_drvdata(&spi->dev, NULL);
180         kfree(p_lm70);
181         return status;
182 }
183
184 static int __devexit lm70_remove(struct spi_device *spi)
185 {
186         struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
187
188         device_remove_file(&spi->dev, &dev_attr_temp1_input);
189         device_remove_file(&spi->dev, &dev_attr_name);
190         hwmon_device_unregister(p_lm70->hwmon_dev);
191         dev_set_drvdata(&spi->dev, NULL);
192         kfree(p_lm70);
193
194         return 0;
195 }
196
197
198 static const struct spi_device_id lm70_ids[] = {
199         { "lm70",   LM70_CHIP_LM70 },
200         { "tmp121", LM70_CHIP_TMP121 },
201         { },
202 };
203 MODULE_DEVICE_TABLE(spi, lm70_ids);
204
205 static struct spi_driver lm70_driver = {
206         .driver = {
207                 .name   = "lm70",
208                 .owner  = THIS_MODULE,
209         },
210         .id_table = lm70_ids,
211         .probe  = lm70_probe,
212         .remove = __devexit_p(lm70_remove),
213 };
214
215 static int __init init_lm70(void)
216 {
217         return spi_register_driver(&lm70_driver);
218 }
219
220 static void __exit cleanup_lm70(void)
221 {
222         spi_unregister_driver(&lm70_driver);
223 }
224
225 module_init(init_lm70);
226 module_exit(cleanup_lm70);
227
228 MODULE_AUTHOR("Kaiwan N Billimoria");
229 MODULE_DESCRIPTION("NS LM70 / TI TMP121/TMP123 Linux driver");
230 MODULE_LICENSE("GPL");