SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/block/DAC960.c

   1 /*
   2
   3   Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
   4
   5   Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
   6   Portions Copyright 2002 by Mylex (An IBM Business Unit)
   7
   8   This program is free software; you may redistribute and/or modify it under
   9   the terms of the GNU General Public License Version 2 as published by the
  10   Free Software Foundation.
  11
  12   This program is distributed in the hope that it will be useful, but
  13   WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
  14   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15   for complete details.
  16
  17 */
  18
  19
  20 #define DAC960_DriverVersion                    "2.5.49"
  21 #define DAC960_DriverDate                       "21 Aug 2007"
  22
  23
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/miscdevice.h>
  27 #include <linux/blkdev.h>
  28 #include <linux/bio.h>
  29 #include <linux/completion.h>
  30 #include <linux/delay.h>
  31 #include <linux/genhd.h>
  32 #include <linux/hdreg.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/ioport.h>
  37 #include <linux/mm.h>
  38 #include <linux/slab.h>
  39 #include <linux/smp_lock.h>
  40 #include <linux/proc_fs.h>
  41 #include <linux/seq_file.h>
  42 #include <linux/reboot.h>
  43 #include <linux/spinlock.h>
  44 #include <linux/timer.h>
  45 #include <linux/pci.h>
  46 #include <linux/init.h>
  47 #include <linux/jiffies.h>
  48 #include <linux/random.h>
  49 #include <linux/scatterlist.h>
  50 #include <asm/io.h>
  51 #include <asm/uaccess.h>
  52 #include "DAC960.h"
  53
  54 #define DAC960_GAM_MINOR        252
  55
  56
  57 static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
  58 static int DAC960_ControllerCount;
  59 static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
  60
  61 static long disk_size(DAC960_Controller_T *p, int drive_nr)
  62 {
  63         if (p->FirmwareType == DAC960_V1_Controller) {
  64                 if (drive_nr >= p->LogicalDriveCount)
  65                         return 0;
  66                 return p->V1.LogicalDriveInformation[drive_nr].
  67                         LogicalDriveSize;
  68         } else {
  69                 DAC960_V2_LogicalDeviceInfo_T *i =
  70                         p->V2.LogicalDeviceInformation[drive_nr];
  71                 if (i == NULL)
  72                         return 0;
  73                 return i->ConfigurableDeviceSize;
  74         }
  75 }
  76
  77 static int DAC960_open(struct block_device *bdev, fmode_t mode)
  78 {
  79         struct gendisk *disk = bdev->bd_disk;
  80         DAC960_Controller_T *p = disk->queue->queuedata;
  81         int drive_nr = (long)disk->private_data;
  82
  83         if (p->FirmwareType == DAC960_V1_Controller) {
  84                 if (p->V1.LogicalDriveInformation[drive_nr].
  85                     LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
  86                         return -ENXIO;
  87         } else {
  88                 DAC960_V2_LogicalDeviceInfo_T *i =
  89                         p->V2.LogicalDeviceInformation[drive_nr];
  90                 if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
  91                         return -ENXIO;
  92         }
  93
  94         check_disk_change(bdev);
  95
  96         if (!get_capacity(p->disks[drive_nr]))
  97                 return -ENXIO;
  98         return 0;
  99 }
 100
 101 static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 102 {
 103         struct gendisk *disk = bdev->bd_disk;
 104         DAC960_Controller_T *p = disk->queue->queuedata;
 105         int drive_nr = (long)disk->private_data;
 106
 107         if (p->FirmwareType == DAC960_V1_Controller) {
 108                 geo->heads = p->V1.GeometryTranslationHeads;
 109                 geo->sectors = p->V1.GeometryTranslationSectors;
 110                 geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
 111                         LogicalDriveSize / (geo->heads * geo->sectors);
 112         } else {
 113                 DAC960_V2_LogicalDeviceInfo_T *i =
 114                         p->V2.LogicalDeviceInformation[drive_nr];
 115                 switch (i->DriveGeometry) {
 116                 case DAC960_V2_Geometry_128_32:
 117                         geo->heads = 128;
 118                         geo->sectors = 32;
 119                         break;
 120                 case DAC960_V2_Geometry_255_63:
 121                         geo->heads = 255;
 122                         geo->sectors = 63;
 123                         break;
 124                 default:
 125                         DAC960_Error("Illegal Logical Device Geometry %d\n",
 126                                         p, i->DriveGeometry);
 127                         return -EINVAL;
 128                 }
 129
 130                 geo->cylinders = i->ConfigurableDeviceSize /
 131                         (geo->heads * geo->sectors);
 132         }
 133
 134         return 0;
 135 }
 136
 137 static int DAC960_media_changed(struct gendisk *disk)
 138 {
 139         DAC960_Controller_T *p = disk->queue->queuedata;
 140         int drive_nr = (long)disk->private_data;
 141
 142         if (!p->LogicalDriveInitiallyAccessible[drive_nr])
 143                 return 1;
 144         return 0;
 145 }
 146
 147 static int DAC960_revalidate_disk(struct gendisk *disk)
 148 {
 149         DAC960_Controller_T *p = disk->queue->queuedata;
 150         int unit = (long)disk->private_data;
 151
 152         set_capacity(disk, disk_size(p, unit));
 153         return 0;
 154 }
 155
 156 static const struct block_device_operations DAC960_BlockDeviceOperations = {
 157         .owner                  = THIS_MODULE,
 158         .open                   = DAC960_open,
 159         .getgeo                 = DAC960_getgeo,
 160         .media_changed          = DAC960_media_changed,
 161         .revalidate_disk        = DAC960_revalidate_disk,
 162 };
 163
 164
 165 /*
 166   DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
 167   Copyright Notice, and Electronic Mail Address.
 168 */
 169
 170 static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
 171 {
 172   DAC960_Announce("***** DAC960 RAID Driver Version "
 173                   DAC960_DriverVersion " of "
 174                   DAC960_DriverDate " *****\n", Controller);
 175   DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
 176                   "<lnz@dandelion.com>\n", Controller);
 177 }
 178
 179
 180 /*
 181   DAC960_Failure prints a standardized error message, and then returns false.
 182 */
 183
 184 static bool DAC960_Failure(DAC960_Controller_T *Controller,
 185                               unsigned char *ErrorMessage)
 186 {
 187   DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
 188                Controller);
 189   if (Controller->IO_Address == 0)
 190     DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
 191                  "PCI Address 0x%X\n", Controller,
 192                  Controller->Bus, Controller->Device,
 193                  Controller->Function, Controller->PCI_Address);
 194   else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
 195                     "0x%X PCI Address 0x%X\n", Controller,
 196                     Controller->Bus, Controller->Device,
 197                     Controller->Function, Controller->IO_Address,
 198                     Controller->PCI_Address);
 199   DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
 200   return false;
 201 }
 202
 203 /*
 204   init_dma_loaf() and slice_dma_loaf() are helper functions for
 205   aggregating the dma-mapped memory for a well-known collection of
 206   data structures that are of different lengths.
 207
 208   These routines don't guarantee any alignment.  The caller must
 209   include any space needed for alignment in the sizes of the structures
 210   that are passed in.
 211  */
 212
 213 static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
 214                                                                  size_t len)
 215 {
 216         void *cpu_addr;
 217         dma_addr_t dma_handle;
 218
 219         cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
 220         if (cpu_addr == NULL)
 221                 return false;
 222
 223         loaf->cpu_free = loaf->cpu_base = cpu_addr;
 224         loaf->dma_free =loaf->dma_base = dma_handle;
 225         loaf->length = len;
 226         memset(cpu_addr, 0, len);
 227         return true;
 228 }
 229
 230 static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
 231                                         dma_addr_t *dma_handle)
 232 {
 233         void *cpu_end = loaf->cpu_free + len;
 234         void *cpu_addr = loaf->cpu_free;
 235
 236         BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
 237         *dma_handle = loaf->dma_free;
 238         loaf->cpu_free = cpu_end;
 239         loaf->dma_free += len;
 240         return cpu_addr;
 241 }
 242
 243 static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
 244 {
 245         if (loaf_handle->cpu_base != NULL)
 246                 pci_free_consistent(dev, loaf_handle->length,
 247                         loaf_handle->cpu_base, loaf_handle->dma_base);
 248 }
 249
 250
 251 /*
 252   DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
 253   data structures for Controller.  It returns true on success and false on
 254   failure.
 255 */
 256
 257 static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
 258 {
 259   int CommandAllocationLength, CommandAllocationGroupSize;
 260   int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
 261   void *AllocationPointer = NULL;
 262   void *ScatterGatherCPU = NULL;
 263   dma_addr_t ScatterGatherDMA;
 264   struct pci_pool *ScatterGatherPool;
 265   void *RequestSenseCPU = NULL;
 266   dma_addr_t RequestSenseDMA;
 267   struct pci_pool *RequestSensePool = NULL;
 268
 269   if (Controller->FirmwareType == DAC960_V1_Controller)
 270     {
 271       CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
 272       CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
 273       ScatterGatherPool = pci_pool_create("DAC960_V1_ScatterGather",
 274                 Controller->PCIDevice,
 275         DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
 276         sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
 277       if (ScatterGatherPool == NULL)
 278             return DAC960_Failure(Controller,
 279                         "AUXILIARY STRUCTURE CREATION (SG)");
 280       Controller->ScatterGatherPool = ScatterGatherPool;
 281     }
 282   else
 283     {
 284       CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
 285       CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
 286       ScatterGatherPool = pci_pool_create("DAC960_V2_ScatterGather",
 287                 Controller->PCIDevice,
 288         DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
 289         sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
 290       if (ScatterGatherPool == NULL)
 291             return DAC960_Failure(Controller,
 292                         "AUXILIARY STRUCTURE CREATION (SG)");
 293       RequestSensePool = pci_pool_create("DAC960_V2_RequestSense",
 294                 Controller->PCIDevice, sizeof(DAC960_SCSI_RequestSense_T),
 295                 sizeof(int), 0);
 296       if (RequestSensePool == NULL) {
 297             pci_pool_destroy(ScatterGatherPool);
 298             return DAC960_Failure(Controller,
 299                         "AUXILIARY STRUCTURE CREATION (SG)");
 300       }
 301       Controller->ScatterGatherPool = ScatterGatherPool;
 302       Controller->V2.RequestSensePool = RequestSensePool;
 303     }
 304   Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
 305   Controller->FreeCommands = NULL;
 306   for (CommandIdentifier = 1;
 307        CommandIdentifier <= Controller->DriverQueueDepth;
 308        CommandIdentifier++)
 309     {
 310       DAC960_Command_T *Command;
 311       if (--CommandsRemaining <= 0)
 312         {
 313           CommandsRemaining =
 314                 Controller->DriverQueueDepth - CommandIdentifier + 1;
 315           if (CommandsRemaining > CommandAllocationGroupSize)
 316                 CommandsRemaining = CommandAllocationGroupSize;
 317           CommandGroupByteCount =
 318                 CommandsRemaining * CommandAllocationLength;
 319           AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
 320           if (AllocationPointer == NULL)
 321                 return DAC960_Failure(Controller,
 322                                         "AUXILIARY STRUCTURE CREATION");
 323          }
 324       Command = (DAC960_Command_T *) AllocationPointer;
 325       AllocationPointer += CommandAllocationLength;
 326       Command->CommandIdentifier = CommandIdentifier;
 327       Command->Controller = Controller;
 328       Command->Next = Controller->FreeCommands;
 329       Controller->FreeCommands = Command;
 330       Controller->Commands[CommandIdentifier-1] = Command;
 331       ScatterGatherCPU = pci_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
 332                                                         &ScatterGatherDMA);
 333       if (ScatterGatherCPU == NULL)
 334           return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
 335
 336       if (RequestSensePool != NULL) {
 337           RequestSenseCPU = pci_pool_alloc(RequestSensePool, GFP_ATOMIC,
 338                                                 &RequestSenseDMA);
 339           if (RequestSenseCPU == NULL) {
 340                 pci_pool_free(ScatterGatherPool, ScatterGatherCPU,
 341                                 ScatterGatherDMA);
 342                 return DAC960_Failure(Controller,
 343                                         "AUXILIARY STRUCTURE CREATION");
 344           }
 345         }
 346      if (Controller->FirmwareType == DAC960_V1_Controller) {
 347         Command->cmd_sglist = Command->V1.ScatterList;
 348         Command->V1.ScatterGatherList =
 349                 (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
 350         Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
 351         sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
 352       } else {
 353         Command->cmd_sglist = Command->V2.ScatterList;
 354         Command->V2.ScatterGatherList =
 355                 (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
 356         Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
 357         Command->V2.RequestSense =
 358                                 (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
 359         Command->V2.RequestSenseDMA = RequestSenseDMA;
 360         sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
 361       }
 362     }
 363   return true;
 364 }
 365
 366
 367 /*
 368   DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
 369   structures for Controller.
 370 */
 371
 372 static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
 373 {
 374   int i;
 375   struct pci_pool *ScatterGatherPool = Controller->ScatterGatherPool;
 376   struct pci_pool *RequestSensePool = NULL;
 377   void *ScatterGatherCPU;
 378   dma_addr_t ScatterGatherDMA;
 379   void *RequestSenseCPU;
 380   dma_addr_t RequestSenseDMA;
 381   DAC960_Command_T *CommandGroup = NULL;
 382
 383
 384   if (Controller->FirmwareType == DAC960_V2_Controller)
 385         RequestSensePool = Controller->V2.RequestSensePool;
 386
 387   Controller->FreeCommands = NULL;
 388   for (i = 0; i < Controller->DriverQueueDepth; i++)
 389     {
 390       DAC960_Command_T *Command = Controller->Commands[i];
 391
 392       if (Command == NULL)
 393           continue;
 394
 395       if (Controller->FirmwareType == DAC960_V1_Controller) {
 396           ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
 397           ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
 398           RequestSenseCPU = NULL;
 399           RequestSenseDMA = (dma_addr_t)0;
 400       } else {
 401           ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
 402           ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
 403           RequestSenseCPU = (void *)Command->V2.RequestSense;
 404           RequestSenseDMA = Command->V2.RequestSenseDMA;
 405       }
 406       if (ScatterGatherCPU != NULL)
 407           pci_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
 408       if (RequestSenseCPU != NULL)
 409           pci_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
 410
 411       if ((Command->CommandIdentifier
 412            % Controller->CommandAllocationGroupSize) == 1) {
 413            /*
 414             * We can't free the group of commands until all of the
 415             * request sense and scatter gather dma structures are free.
 416             * Remember the beginning of the group, but don't free it
 417             * until we've reached the beginning of the next group.
 418             */
 419            kfree(CommandGroup);
 420            CommandGroup = Command;
 421       }
 422       Controller->Commands[i] = NULL;
 423     }
 424   kfree(CommandGroup);
 425
 426   if (Controller->CombinedStatusBuffer != NULL)
 427     {
 428       kfree(Controller->CombinedStatusBuffer);
 429       Controller->CombinedStatusBuffer = NULL;
 430       Controller->CurrentStatusBuffer = NULL;
 431     }
 432
 433   if (ScatterGatherPool != NULL)
 434         pci_pool_destroy(ScatterGatherPool);
 435   if (Controller->FirmwareType == DAC960_V1_Controller)
 436         return;
 437
 438   if (RequestSensePool != NULL)
 439         pci_pool_destroy(RequestSensePool);
 440
 441   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
 442         kfree(Controller->V2.LogicalDeviceInformation[i]);
 443         Controller->V2.LogicalDeviceInformation[i] = NULL;
 444   }
 445
 446   for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
 447     {
 448       kfree(Controller->V2.PhysicalDeviceInformation[i]);
 449       Controller->V2.PhysicalDeviceInformation[i] = NULL;
 450       kfree(Controller->V2.InquiryUnitSerialNumber[i]);
 451       Controller->V2.InquiryUnitSerialNumber[i] = NULL;
 452     }
 453 }
 454
 455
 456 /*
 457   DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
 458   Firmware Controllers.
 459 */
 460
 461 static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
 462 {
 463   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 464   memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
 465   Command->V1.CommandStatus = 0;
 466 }
 467
 468
 469 /*
 470   DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
 471   Firmware Controllers.
 472 */
 473
 474 static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
 475 {
 476   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 477   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
 478   Command->V2.CommandStatus = 0;
 479 }
 480
 481
 482 /*
 483   DAC960_AllocateCommand allocates a Command structure from Controller's
 484   free list.  During driver initialization, a special initialization command
 485   has been placed on the free list to guarantee that command allocation can
 486   never fail.
 487 */
 488
 489 static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
 490                                                        *Controller)
 491 {
 492   DAC960_Command_T *Command = Controller->FreeCommands;
 493   if (Command == NULL) return NULL;
 494   Controller->FreeCommands = Command->Next;
 495   Command->Next = NULL;
 496   return Command;
 497 }
 498
 499
 500 /*
 501   DAC960_DeallocateCommand deallocates Command, returning it to Controller's
 502   free list.
 503 */
 504
 505 static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
 506 {
 507   DAC960_Controller_T *Controller = Command->Controller;
 508
 509   Command->Request = NULL;
 510   Command->Next = Controller->FreeCommands;
 511   Controller->FreeCommands = Command;
 512 }
 513
 514
 515 /*
 516   DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
 517 */
 518
 519 static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
 520 {
 521   spin_unlock_irq(&Controller->queue_lock);
 522   __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
 523   spin_lock_irq(&Controller->queue_lock);
 524 }
 525
 526 /*
 527   DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
 528 */
 529
 530 static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
 531 {
 532   DAC960_Controller_T *Controller = Command->Controller;
 533   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 534   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 535   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 536       Controller->V2.NextCommandMailbox;
 537
 538   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 539   DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 540
 541   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 542       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 543       DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
 544
 545   Controller->V2.PreviousCommandMailbox2 =
 546       Controller->V2.PreviousCommandMailbox1;
 547   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 548
 549   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 550       NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 551
 552   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 553 }
 554
 555 /*
 556   DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
 557 */
 558
 559 static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
 560 {
 561   DAC960_Controller_T *Controller = Command->Controller;
 562   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 563   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 564   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 565     Controller->V2.NextCommandMailbox;
 566   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 567   DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 568   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 569       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 570     DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
 571   Controller->V2.PreviousCommandMailbox2 =
 572     Controller->V2.PreviousCommandMailbox1;
 573   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 574   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 575     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 576   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 577 }
 578
 579
 580 /*
 581   DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
 582 */
 583
 584 static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
 585 {
 586   DAC960_Controller_T *Controller = Command->Controller;
 587   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 588   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 589   DAC960_V2_CommandMailbox_T *NextCommandMailbox =
 590     Controller->V2.NextCommandMailbox;
 591   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 592   DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 593   if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
 594       Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
 595     DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
 596   Controller->V2.PreviousCommandMailbox2 =
 597     Controller->V2.PreviousCommandMailbox1;
 598   Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
 599   if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
 600     NextCommandMailbox = Controller->V2.FirstCommandMailbox;
 601   Controller->V2.NextCommandMailbox = NextCommandMailbox;
 602 }
 603
 604
 605 /*
 606   DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
 607   Controllers with Dual Mode Firmware.
 608 */
 609
 610 static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
 611 {
 612   DAC960_Controller_T *Controller = Command->Controller;
 613   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 614   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 615   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 616     Controller->V1.NextCommandMailbox;
 617   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 618   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 619   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 620       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 621     DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
 622   Controller->V1.PreviousCommandMailbox2 =
 623     Controller->V1.PreviousCommandMailbox1;
 624   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 625   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 626     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 627   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 628 }
 629
 630
 631 /*
 632   DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
 633   Controllers with Single Mode Firmware.
 634 */
 635
 636 static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
 637 {
 638   DAC960_Controller_T *Controller = Command->Controller;
 639   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 640   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 641   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 642     Controller->V1.NextCommandMailbox;
 643   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 644   DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 645   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 646       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 647     DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
 648   Controller->V1.PreviousCommandMailbox2 =
 649     Controller->V1.PreviousCommandMailbox1;
 650   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 651   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 652     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 653   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 654 }
 655
 656
 657 /*
 658   DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
 659   Controllers with Dual Mode Firmware.
 660 */
 661
 662 static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
 663 {
 664   DAC960_Controller_T *Controller = Command->Controller;
 665   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 666   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 667   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 668     Controller->V1.NextCommandMailbox;
 669   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 670   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 671   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 672       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 673     DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
 674   Controller->V1.PreviousCommandMailbox2 =
 675     Controller->V1.PreviousCommandMailbox1;
 676   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 677   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 678     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 679   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 680 }
 681
 682
 683 /*
 684   DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
 685   Controllers with Single Mode Firmware.
 686 */
 687
 688 static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
 689 {
 690   DAC960_Controller_T *Controller = Command->Controller;
 691   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 692   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 693   DAC960_V1_CommandMailbox_T *NextCommandMailbox =
 694     Controller->V1.NextCommandMailbox;
 695   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 696   DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
 697   if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
 698       Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
 699     DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
 700   Controller->V1.PreviousCommandMailbox2 =
 701     Controller->V1.PreviousCommandMailbox1;
 702   Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
 703   if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
 704     NextCommandMailbox = Controller->V1.FirstCommandMailbox;
 705   Controller->V1.NextCommandMailbox = NextCommandMailbox;
 706 }
 707
 708
 709 /*
 710   DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
 711 */
 712
 713 static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
 714 {
 715   DAC960_Controller_T *Controller = Command->Controller;
 716   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 717   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 718   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 719   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 720     udelay(1);
 721   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 722   DAC960_PD_NewCommand(ControllerBaseAddress);
 723 }
 724
 725
 726 /*
 727   DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
 728 */
 729
 730 static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
 731 {
 732   DAC960_Controller_T *Controller = Command->Controller;
 733   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
 734   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 735   CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
 736   switch (CommandMailbox->Common.CommandOpcode)
 737     {
 738     case DAC960_V1_Enquiry:
 739       CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
 740       break;
 741     case DAC960_V1_GetDeviceState:
 742       CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
 743       break;
 744     case DAC960_V1_Read:
 745       CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
 746       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 747       break;
 748     case DAC960_V1_Write:
 749       CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
 750       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 751       break;
 752     case DAC960_V1_ReadWithScatterGather:
 753       CommandMailbox->Common.CommandOpcode =
 754         DAC960_V1_ReadWithScatterGather_Old;
 755       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 756       break;
 757     case DAC960_V1_WriteWithScatterGather:
 758       CommandMailbox->Common.CommandOpcode =
 759         DAC960_V1_WriteWithScatterGather_Old;
 760       DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
 761       break;
 762     default:
 763       break;
 764     }
 765   while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
 766     udelay(1);
 767   DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
 768   DAC960_PD_NewCommand(ControllerBaseAddress);
 769 }
 770
 771
 772 /*
 773   DAC960_ExecuteCommand executes Command and waits for completion.
 774 */
 775
 776 static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
 777 {
 778   DAC960_Controller_T *Controller = Command->Controller;
 779   DECLARE_COMPLETION_ONSTACK(Completion);
 780   unsigned long flags;
 781   Command->Completion = &Completion;
 782
 783   spin_lock_irqsave(&Controller->queue_lock, flags);
 784   DAC960_QueueCommand(Command);
 785   spin_unlock_irqrestore(&Controller->queue_lock, flags);
 786
 787   if (in_interrupt())
 788           return;
 789   wait_for_completion(&Completion);
 790 }
 791
 792
 793 /*
 794   DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
 795   Command and waits for completion.  It returns true on success and false
 796   on failure.
 797 */
 798
 799 static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
 800                                       DAC960_V1_CommandOpcode_T CommandOpcode,
 801                                       dma_addr_t DataDMA)
 802 {
 803   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 804   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 805   DAC960_V1_CommandStatus_T CommandStatus;
 806   DAC960_V1_ClearCommand(Command);
 807   Command->CommandType = DAC960_ImmediateCommand;
 808   CommandMailbox->Type3.CommandOpcode = CommandOpcode;
 809   CommandMailbox->Type3.BusAddress = DataDMA;
 810   DAC960_ExecuteCommand(Command);
 811   CommandStatus = Command->V1.CommandStatus;
 812   DAC960_DeallocateCommand(Command);
 813   return (CommandStatus == DAC960_V1_NormalCompletion);
 814 }
 815
 816
 817 /*
 818   DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
 819   Command and waits for completion.  It returns true on success and false
 820   on failure.
 821 */
 822
 823 static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
 824                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 825                                        unsigned char CommandOpcode2,
 826                                        dma_addr_t DataDMA)
 827 {
 828   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 829   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 830   DAC960_V1_CommandStatus_T CommandStatus;
 831   DAC960_V1_ClearCommand(Command);
 832   Command->CommandType = DAC960_ImmediateCommand;
 833   CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
 834   CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
 835   CommandMailbox->Type3B.BusAddress = DataDMA;
 836   DAC960_ExecuteCommand(Command);
 837   CommandStatus = Command->V1.CommandStatus;
 838   DAC960_DeallocateCommand(Command);
 839   return (CommandStatus == DAC960_V1_NormalCompletion);
 840 }
 841
 842
 843 /*
 844   DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
 845   Command and waits for completion.  It returns true on success and false
 846   on failure.
 847 */
 848
 849 static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
 850                                        DAC960_V1_CommandOpcode_T CommandOpcode,
 851                                        unsigned char Channel,
 852                                        unsigned char TargetID,
 853                                        dma_addr_t DataDMA)
 854 {
 855   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 856   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
 857   DAC960_V1_CommandStatus_T CommandStatus;
 858   DAC960_V1_ClearCommand(Command);
 859   Command->CommandType = DAC960_ImmediateCommand;
 860   CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
 861   CommandMailbox->Type3D.Channel = Channel;
 862   CommandMailbox->Type3D.TargetID = TargetID;
 863   CommandMailbox->Type3D.BusAddress = DataDMA;
 864   DAC960_ExecuteCommand(Command);
 865   CommandStatus = Command->V1.CommandStatus;
 866   DAC960_DeallocateCommand(Command);
 867   return (CommandStatus == DAC960_V1_NormalCompletion);
 868 }
 869
 870
 871 /*
 872   DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
 873   Reading IOCTL Command and waits for completion.  It returns true on success
 874   and false on failure.
 875
 876   Return data in The controller's HealthStatusBuffer, which is dma-able memory
 877 */
 878
 879 static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
 880 {
 881   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 882   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 883   DAC960_V2_CommandStatus_T CommandStatus;
 884   DAC960_V2_ClearCommand(Command);
 885   Command->CommandType = DAC960_ImmediateCommand;
 886   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
 887   CommandMailbox->Common.CommandControlBits
 888                         .DataTransferControllerToHost = true;
 889   CommandMailbox->Common.CommandControlBits
 890                         .NoAutoRequestSense = true;
 891   CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
 892   CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
 893   CommandMailbox->Common.DataTransferMemoryAddress
 894                         .ScatterGatherSegments[0]
 895                         .SegmentDataPointer =
 896     Controller->V2.HealthStatusBufferDMA;
 897   CommandMailbox->Common.DataTransferMemoryAddress
 898                         .ScatterGatherSegments[0]
 899                         .SegmentByteCount =
 900     CommandMailbox->Common.DataTransferSize;
 901   DAC960_ExecuteCommand(Command);
 902   CommandStatus = Command->V2.CommandStatus;
 903   DAC960_DeallocateCommand(Command);
 904   return (CommandStatus == DAC960_V2_NormalCompletion);
 905 }
 906
 907
 908 /*
 909   DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
 910   Information Reading IOCTL Command and waits for completion.  It returns
 911   true on success and false on failure.
 912
 913   Data is returned in the controller's V2.NewControllerInformation dma-able
 914   memory buffer.
 915 */
 916
 917 static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
 918 {
 919   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 920   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 921   DAC960_V2_CommandStatus_T CommandStatus;
 922   DAC960_V2_ClearCommand(Command);
 923   Command->CommandType = DAC960_ImmediateCommand;
 924   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
 925   CommandMailbox->ControllerInfo.CommandControlBits
 926                                 .DataTransferControllerToHost = true;
 927   CommandMailbox->ControllerInfo.CommandControlBits
 928                                 .NoAutoRequestSense = true;
 929   CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
 930   CommandMailbox->ControllerInfo.ControllerNumber = 0;
 931   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
 932   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 933                                 .ScatterGatherSegments[0]
 934                                 .SegmentDataPointer =
 935         Controller->V2.NewControllerInformationDMA;
 936   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
 937                                 .ScatterGatherSegments[0]
 938                                 .SegmentByteCount =
 939     CommandMailbox->ControllerInfo.DataTransferSize;
 940   DAC960_ExecuteCommand(Command);
 941   CommandStatus = Command->V2.CommandStatus;
 942   DAC960_DeallocateCommand(Command);
 943   return (CommandStatus == DAC960_V2_NormalCompletion);
 944 }
 945
 946
 947 /*
 948   DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
 949   Device Information Reading IOCTL Command and waits for completion.  It
 950   returns true on success and false on failure.
 951
 952   Data is returned in the controller's V2.NewLogicalDeviceInformation
 953 */
 954
 955 static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
 956                                            unsigned short LogicalDeviceNumber)
 957 {
 958   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
 959   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
 960   DAC960_V2_CommandStatus_T CommandStatus;
 961
 962   DAC960_V2_ClearCommand(Command);
 963   Command->CommandType = DAC960_ImmediateCommand;
 964   CommandMailbox->LogicalDeviceInfo.CommandOpcode =
 965                                 DAC960_V2_IOCTL;
 966   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 967                                    .DataTransferControllerToHost = true;
 968   CommandMailbox->LogicalDeviceInfo.CommandControlBits
 969                                    .NoAutoRequestSense = true;
 970   CommandMailbox->LogicalDeviceInfo.DataTransferSize =
 971                                 sizeof(DAC960_V2_LogicalDeviceInfo_T);
 972   CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
 973     LogicalDeviceNumber;
 974   CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
 975   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 976                                    .ScatterGatherSegments[0]
 977                                    .SegmentDataPointer =
 978         Controller->V2.NewLogicalDeviceInformationDMA;
 979   CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
 980                                    .ScatterGatherSegments[0]
 981                                    .SegmentByteCount =
 982     CommandMailbox->LogicalDeviceInfo.DataTransferSize;
 983   DAC960_ExecuteCommand(Command);
 984   CommandStatus = Command->V2.CommandStatus;
 985   DAC960_DeallocateCommand(Command);
 986   return (CommandStatus == DAC960_V2_NormalCompletion);
 987 }
 988
 989
 990 /*
 991   DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
 992   Physical Device Information" IOCTL Command and waits for completion.  It
 993   returns true on success and false on failure.
 994
 995   The Channel, TargetID, LogicalUnit arguments should be 0 the first time
 996   this function is called for a given controller.  This will return data
 997   for the "first" device on that controller.  The returned data includes a
 998   Channel, TargetID, LogicalUnit that can be passed in to this routine to
 999   get data for the NEXT device on that controller.
1000
1001   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1002   memory buffer.
1003
1004 */
1005
1006 static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
1007                                             unsigned char Channel,
1008                                             unsigned char TargetID,
1009                                             unsigned char LogicalUnit)
1010 {
1011   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1012   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1013   DAC960_V2_CommandStatus_T CommandStatus;
1014
1015   DAC960_V2_ClearCommand(Command);
1016   Command->CommandType = DAC960_ImmediateCommand;
1017   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
1018   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1019                                     .DataTransferControllerToHost = true;
1020   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
1021                                     .NoAutoRequestSense = true;
1022   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
1023                                 sizeof(DAC960_V2_PhysicalDeviceInfo_T);
1024   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
1025   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
1026   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
1027   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
1028                                         DAC960_V2_GetPhysicalDeviceInfoValid;
1029   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1030                                     .ScatterGatherSegments[0]
1031                                     .SegmentDataPointer =
1032                                         Controller->V2.NewPhysicalDeviceInformationDMA;
1033   CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
1034                                     .ScatterGatherSegments[0]
1035                                     .SegmentByteCount =
1036     CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
1037   DAC960_ExecuteCommand(Command);
1038   CommandStatus = Command->V2.CommandStatus;
1039   DAC960_DeallocateCommand(Command);
1040   return (CommandStatus == DAC960_V2_NormalCompletion);
1041 }
1042
1043
1044 static void DAC960_V2_ConstructNewUnitSerialNumber(
1045         DAC960_Controller_T *Controller,
1046         DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
1047         int LogicalUnit)
1048 {
1049       CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
1050       CommandMailbox->SCSI_10.CommandControlBits
1051                              .DataTransferControllerToHost = true;
1052       CommandMailbox->SCSI_10.CommandControlBits
1053                              .NoAutoRequestSense = true;
1054       CommandMailbox->SCSI_10.DataTransferSize =
1055         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1056       CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
1057       CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
1058       CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
1059       CommandMailbox->SCSI_10.CDBLength = 6;
1060       CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
1061       CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
1062       CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
1063       CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
1064       CommandMailbox->SCSI_10.SCSI_CDB[4] =
1065         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1066       CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
1067       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1068                              .ScatterGatherSegments[0]
1069                              .SegmentDataPointer =
1070                 Controller->V2.NewInquiryUnitSerialNumberDMA;
1071       CommandMailbox->SCSI_10.DataTransferMemoryAddress
1072                              .ScatterGatherSegments[0]
1073                              .SegmentByteCount =
1074                 CommandMailbox->SCSI_10.DataTransferSize;
1075 }
1076
1077
1078 /*
1079   DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
1080   Inquiry command to a SCSI device identified by Channel number,
1081   Target id, Logical Unit Number.  This function Waits for completion
1082   of the command.
1083
1084   The return data includes Unit Serial Number information for the
1085   specified device.
1086
1087   Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
1088   memory buffer.
1089 */
1090
1091 static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
1092                         int Channel, int TargetID, int LogicalUnit)
1093 {
1094       DAC960_Command_T *Command;
1095       DAC960_V2_CommandMailbox_T *CommandMailbox;
1096       DAC960_V2_CommandStatus_T CommandStatus;
1097
1098       Command = DAC960_AllocateCommand(Controller);
1099       CommandMailbox = &Command->V2.CommandMailbox;
1100       DAC960_V2_ClearCommand(Command);
1101       Command->CommandType = DAC960_ImmediateCommand;
1102
1103       DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
1104                         Channel, TargetID, LogicalUnit);
1105
1106       DAC960_ExecuteCommand(Command);
1107       CommandStatus = Command->V2.CommandStatus;
1108       DAC960_DeallocateCommand(Command);
1109       return (CommandStatus == DAC960_V2_NormalCompletion);
1110 }
1111
1112
1113 /*
1114   DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
1115   Operation IOCTL Command and waits for completion.  It returns true on
1116   success and false on failure.
1117 */
1118
1119 static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
1120                                          DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
1121                                          DAC960_V2_OperationDevice_T
1122                                            OperationDevice)
1123 {
1124   DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
1125   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
1126   DAC960_V2_CommandStatus_T CommandStatus;
1127   DAC960_V2_ClearCommand(Command);
1128   Command->CommandType = DAC960_ImmediateCommand;
1129   CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
1130   CommandMailbox->DeviceOperation.CommandControlBits
1131                                  .DataTransferControllerToHost = true;
1132   CommandMailbox->DeviceOperation.CommandControlBits
1133                                  .NoAutoRequestSense = true;
1134   CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
1135   CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
1136   DAC960_ExecuteCommand(Command);
1137   CommandStatus = Command->V2.CommandStatus;
1138   DAC960_DeallocateCommand(Command);
1139   return (CommandStatus == DAC960_V2_NormalCompletion);
1140 }
1141
1142
1143 /*
1144   DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1145   for DAC960 V1 Firmware Controllers.
1146
1147   PD and P controller types have no memory mailbox, but still need the
1148   other dma mapped memory.
1149 */
1150
1151 static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
1152                                                       *Controller)
1153 {
1154   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1155   DAC960_HardwareType_T hw_type = Controller->HardwareType;
1156   struct pci_dev *PCI_Device = Controller->PCIDevice;
1157   struct dma_loaf *DmaPages = &Controller->DmaPages;
1158   size_t DmaPagesSize;
1159   size_t CommandMailboxesSize;
1160   size_t StatusMailboxesSize;
1161
1162   DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
1163   dma_addr_t CommandMailboxesMemoryDMA;
1164
1165   DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
1166   dma_addr_t StatusMailboxesMemoryDMA;
1167
1168   DAC960_V1_CommandMailbox_T CommandMailbox;
1169   DAC960_V1_CommandStatus_T CommandStatus;
1170   int TimeoutCounter;
1171   int i;
1172
1173
1174   if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1175         return DAC960_Failure(Controller, "DMA mask out of range");
1176   Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1177
1178   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
1179     CommandMailboxesSize =  0;
1180     StatusMailboxesSize = 0;
1181   } else {
1182     CommandMailboxesSize =  DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
1183     StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
1184   }
1185   DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
1186         sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
1187         sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
1188         sizeof(DAC960_V1_RebuildProgress_T) +
1189         sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
1190         sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
1191         sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
1192         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
1193
1194   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
1195         return false;
1196
1197
1198   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1199         goto skip_mailboxes;
1200
1201   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1202                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1203
1204   /* These are the base addresses for the command memory mailbox array */
1205   Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
1206   Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1207
1208   CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
1209   Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
1210   Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
1211   Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
1212   Controller->V1.PreviousCommandMailbox2 =
1213                                         Controller->V1.LastCommandMailbox - 1;
1214
1215   /* These are the base addresses for the status memory mailbox array */
1216   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1217                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1218
1219   Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
1220   Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1221   StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
1222   Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
1223   Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
1224
1225 skip_mailboxes:
1226   Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
1227                 sizeof(DAC960_V1_DCDB_T),
1228                 &Controller->V1.MonitoringDCDB_DMA);
1229
1230   Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
1231                 sizeof(DAC960_V1_Enquiry_T),
1232                 &Controller->V1.NewEnquiryDMA);
1233
1234   Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
1235                 sizeof(DAC960_V1_ErrorTable_T),
1236                 &Controller->V1.NewErrorTableDMA);
1237
1238   Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
1239                 sizeof(DAC960_V1_EventLogEntry_T),
1240                 &Controller->V1.EventLogEntryDMA);
1241
1242   Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
1243                 sizeof(DAC960_V1_RebuildProgress_T),
1244                 &Controller->V1.RebuildProgressDMA);
1245
1246   Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
1247                 sizeof(DAC960_V1_LogicalDriveInformationArray_T),
1248                 &Controller->V1.NewLogicalDriveInformationDMA);
1249
1250   Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
1251                 sizeof(DAC960_V1_BackgroundInitializationStatus_T),
1252                 &Controller->V1.BackgroundInitializationStatusDMA);
1253
1254   Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
1255                 sizeof(DAC960_V1_DeviceState_T),
1256                 &Controller->V1.NewDeviceStateDMA);
1257
1258   Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
1259                 sizeof(DAC960_SCSI_Inquiry_T),
1260                 &Controller->V1.NewInquiryStandardDataDMA);
1261
1262   Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1263                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1264                 &Controller->V1.NewInquiryUnitSerialNumberDMA);
1265
1266   if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
1267         return true;
1268
1269   /* Enable the Memory Mailbox Interface. */
1270   Controller->V1.DualModeMemoryMailboxInterface = true;
1271   CommandMailbox.TypeX.CommandOpcode = 0x2B;
1272   CommandMailbox.TypeX.CommandIdentifier = 0;
1273   CommandMailbox.TypeX.CommandOpcode2 = 0x14;
1274   CommandMailbox.TypeX.CommandMailboxesBusAddress =
1275                                 Controller->V1.FirstCommandMailboxDMA;
1276   CommandMailbox.TypeX.StatusMailboxesBusAddress =
1277                                 Controller->V1.FirstStatusMailboxDMA;
1278 #define TIMEOUT_COUNT 1000000
1279
1280   for (i = 0; i < 2; i++)
1281     switch (Controller->HardwareType)
1282       {
1283       case DAC960_LA_Controller:
1284         TimeoutCounter = TIMEOUT_COUNT;
1285         while (--TimeoutCounter >= 0)
1286           {
1287             if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
1288               break;
1289             udelay(10);
1290           }
1291         if (TimeoutCounter < 0) return false;
1292         DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1293         DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
1294         TimeoutCounter = TIMEOUT_COUNT;
1295         while (--TimeoutCounter >= 0)
1296           {
1297             if (DAC960_LA_HardwareMailboxStatusAvailableP(
1298                   ControllerBaseAddress))
1299               break;
1300             udelay(10);
1301           }
1302         if (TimeoutCounter < 0) return false;
1303         CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
1304         DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1305         DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1306         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1307         Controller->V1.DualModeMemoryMailboxInterface = false;
1308         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1309         break;
1310       case DAC960_PG_Controller:
1311         TimeoutCounter = TIMEOUT_COUNT;
1312         while (--TimeoutCounter >= 0)
1313           {
1314             if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
1315               break;
1316             udelay(10);
1317           }
1318         if (TimeoutCounter < 0) return false;
1319         DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
1320         DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
1321
1322         TimeoutCounter = TIMEOUT_COUNT;
1323         while (--TimeoutCounter >= 0)
1324           {
1325             if (DAC960_PG_HardwareMailboxStatusAvailableP(
1326                   ControllerBaseAddress))
1327               break;
1328             udelay(10);
1329           }
1330         if (TimeoutCounter < 0) return false;
1331         CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
1332         DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1333         DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1334         if (CommandStatus == DAC960_V1_NormalCompletion) return true;
1335         Controller->V1.DualModeMemoryMailboxInterface = false;
1336         CommandMailbox.TypeX.CommandOpcode2 = 0x10;
1337         break;
1338       default:
1339         DAC960_Failure(Controller, "Unknown Controller Type\n");
1340         break;
1341       }
1342   return false;
1343 }
1344
1345
1346 /*
1347   DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
1348   for DAC960 V2 Firmware Controllers.
1349
1350   Aggregate the space needed for the controller's memory mailbox and
1351   the other data structures that will be targets of dma transfers with
1352   the controller.  Allocate a dma-mapped region of memory to hold these
1353   structures.  Then, save CPU pointers and dma_addr_t values to reference
1354   the structures that are contained in that region.
1355 */
1356
1357 static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
1358                                                       *Controller)
1359 {
1360   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
1361   struct pci_dev *PCI_Device = Controller->PCIDevice;
1362   struct dma_loaf *DmaPages = &Controller->DmaPages;
1363   size_t DmaPagesSize;
1364   size_t CommandMailboxesSize;
1365   size_t StatusMailboxesSize;
1366
1367   DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
1368   dma_addr_t CommandMailboxesMemoryDMA;
1369
1370   DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
1371   dma_addr_t StatusMailboxesMemoryDMA;
1372
1373   DAC960_V2_CommandMailbox_T *CommandMailbox;
1374   dma_addr_t    CommandMailboxDMA;
1375   DAC960_V2_CommandStatus_T CommandStatus;
1376
1377         if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)))
1378                 Controller->BounceBufferLimit = DMA_BIT_MASK(64);
1379         else if (!pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
1380                 Controller->BounceBufferLimit = DMA_BIT_MASK(32);
1381         else
1382                 return DAC960_Failure(Controller, "DMA mask out of range");
1383
1384   /* This is a temporary dma mapping, used only in the scope of this function */
1385   CommandMailbox = pci_alloc_consistent(PCI_Device,
1386                 sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
1387   if (CommandMailbox == NULL)
1388           return false;
1389
1390   CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
1391   StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
1392   DmaPagesSize =
1393     CommandMailboxesSize + StatusMailboxesSize +
1394     sizeof(DAC960_V2_HealthStatusBuffer_T) +
1395     sizeof(DAC960_V2_ControllerInfo_T) +
1396     sizeof(DAC960_V2_LogicalDeviceInfo_T) +
1397     sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
1398     sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
1399     sizeof(DAC960_V2_Event_T) +
1400     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
1401
1402   if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
1403         pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1404                                         CommandMailbox, CommandMailboxDMA);
1405         return false;
1406   }
1407
1408   CommandMailboxesMemory = slice_dma_loaf(DmaPages,
1409                 CommandMailboxesSize, &CommandMailboxesMemoryDMA);
1410
1411   /* These are the base addresses for the command memory mailbox array */
1412   Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
1413   Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
1414
1415   CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
1416   Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
1417   Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
1418   Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
1419   Controller->V2.PreviousCommandMailbox2 =
1420                                         Controller->V2.LastCommandMailbox - 1;
1421
1422   /* These are the base addresses for the status memory mailbox array */
1423   StatusMailboxesMemory = slice_dma_loaf(DmaPages,
1424                 StatusMailboxesSize, &StatusMailboxesMemoryDMA);
1425
1426   Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
1427   Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
1428   StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
1429   Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
1430   Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
1431
1432   Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
1433                 sizeof(DAC960_V2_HealthStatusBuffer_T),
1434                 &Controller->V2.HealthStatusBufferDMA);
1435
1436   Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
1437                 sizeof(DAC960_V2_ControllerInfo_T),
1438                 &Controller->V2.NewControllerInformationDMA);
1439
1440   Controller->V2.NewLogicalDeviceInformation =  slice_dma_loaf(DmaPages,
1441                 sizeof(DAC960_V2_LogicalDeviceInfo_T),
1442                 &Controller->V2.NewLogicalDeviceInformationDMA);
1443
1444   Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
1445                 sizeof(DAC960_V2_PhysicalDeviceInfo_T),
1446                 &Controller->V2.NewPhysicalDeviceInformationDMA);
1447
1448   Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
1449                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1450                 &Controller->V2.NewInquiryUnitSerialNumberDMA);
1451
1452   Controller->V2.Event = slice_dma_loaf(DmaPages,
1453                 sizeof(DAC960_V2_Event_T),
1454                 &Controller->V2.EventDMA);
1455
1456   Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
1457                 sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
1458                 &Controller->V2.PhysicalToLogicalDeviceDMA);
1459
1460   /*
1461     Enable the Memory Mailbox Interface.
1462
1463     I don't know why we can't just use one of the memory mailboxes
1464     we just allocated to do this, instead of using this temporary one.
1465     Try this change later.
1466   */
1467   memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
1468   CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
1469   CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
1470   CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
1471   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
1472     (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
1473   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
1474     (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
1475   CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
1476   CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
1477   CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
1478   CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
1479   CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
1480   CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
1481                                         Controller->V2.HealthStatusBufferDMA;
1482   CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
1483                                         Controller->V2.FirstCommandMailboxDMA;
1484   CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
1485                                         Controller->V2.FirstStatusMailboxDMA;
1486   switch (Controller->HardwareType)
1487     {
1488     case DAC960_GEM_Controller:
1489       while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
1490         udelay(1);
1491       DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1492       DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
1493       while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1494         udelay(1);
1495       CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
1496       DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1497       DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1498       break;
1499     case DAC960_BA_Controller:
1500       while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
1501         udelay(1);
1502       DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1503       DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
1504       while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1505         udelay(1);
1506       CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
1507       DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1508       DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1509       break;
1510     case DAC960_LP_Controller:
1511       while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
1512         udelay(1);
1513       DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
1514       DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
1515       while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
1516         udelay(1);
1517       CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
1518       DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
1519       DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
1520       break;
1521     default:
1522       DAC960_Failure(Controller, "Unknown Controller Type\n");
1523       CommandStatus = DAC960_V2_AbormalCompletion;
1524       break;
1525     }
1526   pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
1527                                         CommandMailbox, CommandMailboxDMA);
1528   return (CommandStatus == DAC960_V2_NormalCompletion);
1529 }
1530
1531
1532 /*
1533   DAC960_V1_ReadControllerConfiguration reads the Configuration Information
1534   from DAC960 V1 Firmware Controllers and initializes the Controller structure.
1535 */
1536
1537 static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
1538                                                      *Controller)
1539 {
1540   DAC960_V1_Enquiry2_T *Enquiry2;
1541   dma_addr_t Enquiry2DMA;
1542   DAC960_V1_Config2_T *Config2;
1543   dma_addr_t Config2DMA;
1544   int LogicalDriveNumber, Channel, TargetID;
1545   struct dma_loaf local_dma;
1546
1547   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1548                 sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
1549         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1550
1551   Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
1552   Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
1553
1554   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
1555                               Controller->V1.NewEnquiryDMA)) {
1556     free_dma_loaf(Controller->PCIDevice, &local_dma);
1557     return DAC960_Failure(Controller, "ENQUIRY");
1558   }
1559   memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
1560                                                 sizeof(DAC960_V1_Enquiry_T));
1561
1562   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
1563     free_dma_loaf(Controller->PCIDevice, &local_dma);
1564     return DAC960_Failure(Controller, "ENQUIRY2");
1565   }
1566
1567   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
1568     free_dma_loaf(Controller->PCIDevice, &local_dma);
1569     return DAC960_Failure(Controller, "READ CONFIG2");
1570   }
1571
1572   if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
1573                               Controller->V1.NewLogicalDriveInformationDMA)) {
1574     free_dma_loaf(Controller->PCIDevice, &local_dma);
1575     return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
1576   }
1577   memcpy(&Controller->V1.LogicalDriveInformation,
1578                 Controller->V1.NewLogicalDriveInformation,
1579                 sizeof(DAC960_V1_LogicalDriveInformationArray_T));
1580
1581   for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
1582     for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
1583       if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
1584                                    Channel, TargetID,
1585                                    Controller->V1.NewDeviceStateDMA)) {
1586                 free_dma_loaf(Controller->PCIDevice, &local_dma);
1587                 return DAC960_Failure(Controller, "GET DEVICE STATE");
1588         }
1589         memcpy(&Controller->V1.DeviceState[Channel][TargetID],
1590                 Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
1591      }
1592   /*
1593     Initialize the Controller Model Name and Full Model Name fields.
1594   */
1595   switch (Enquiry2->HardwareID.SubModel)
1596     {
1597     case DAC960_V1_P_PD_PU:
1598       if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
1599         strcpy(Controller->ModelName, "DAC960PU");
1600       else strcpy(Controller->ModelName, "DAC960PD");
1601       break;
1602     case DAC960_V1_PL:
1603       strcpy(Controller->ModelName, "DAC960PL");
1604       break;
1605     case DAC960_V1_PG:
1606       strcpy(Controller->ModelName, "DAC960PG");
1607       break;
1608     case DAC960_V1_PJ:
1609       strcpy(Controller->ModelName, "DAC960PJ");
1610       break;
1611     case DAC960_V1_PR:
1612       strcpy(Controller->ModelName, "DAC960PR");
1613       break;
1614     case DAC960_V1_PT:
1615       strcpy(Controller->ModelName, "DAC960PT");
1616       break;
1617     case DAC960_V1_PTL0:
1618       strcpy(Controller->ModelName, "DAC960PTL0");
1619       break;
1620     case DAC960_V1_PRL:
1621       strcpy(Controller->ModelName, "DAC960PRL");
1622       break;
1623     case DAC960_V1_PTL1:
1624       strcpy(Controller->ModelName, "DAC960PTL1");
1625       break;
1626     case DAC960_V1_1164P:
1627       strcpy(Controller->ModelName, "DAC1164P");
1628       break;
1629     default:
1630       free_dma_loaf(Controller->PCIDevice, &local_dma);
1631       return DAC960_Failure(Controller, "MODEL VERIFICATION");
1632     }
1633   strcpy(Controller->FullModelName, "Mylex ");
1634   strcat(Controller->FullModelName, Controller->ModelName);
1635   /*
1636     Initialize the Controller Firmware Version field and verify that it
1637     is a supported firmware version.  The supported firmware versions are:
1638
1639     DAC1164P                5.06 and above
1640     DAC960PTL/PRL/PJ/PG     4.06 and above
1641     DAC960PU/PD/PL          3.51 and above
1642     DAC960PU/PD/PL/P        2.73 and above
1643   */
1644 #if defined(CONFIG_ALPHA)
1645   /*
1646     DEC Alpha machines were often equipped with DAC960 cards that were
1647     OEMed from Mylex, and had their own custom firmware. Version 2.70,
1648     the last custom FW revision to be released by DEC for these older
1649     controllers, appears to work quite well with this driver.
1650
1651     Cards tested successfully were several versions each of the PD and
1652     PU, called by DEC the KZPSC and KZPAC, respectively, and having
1653     the Manufacturer Numbers (from Mylex), usually on a sticker on the
1654     back of the board, of:
1655
1656     KZPSC:  D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
1657     KZPAC:  D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
1658   */
1659 # define FIRMWARE_27X   "2.70"
1660 #else
1661 # define FIRMWARE_27X   "2.73"
1662 #endif
1663
1664   if (Enquiry2->FirmwareID.MajorVersion == 0)
1665     {
1666       Enquiry2->FirmwareID.MajorVersion =
1667         Controller->V1.Enquiry.MajorFirmwareVersion;
1668       Enquiry2->FirmwareID.MinorVersion =
1669         Controller->V1.Enquiry.MinorFirmwareVersion;
1670       Enquiry2->FirmwareID.FirmwareType = '0';
1671       Enquiry2->FirmwareID.TurnID = 0;
1672     }
1673   sprintf(Controller->FirmwareVersion, "%d.%02d-%c-%02d",
1674           Enquiry2->FirmwareID.MajorVersion, Enquiry2->FirmwareID.MinorVersion,
1675           Enquiry2->FirmwareID.FirmwareType, Enquiry2->FirmwareID.TurnID);
1676   if (!((Controller->FirmwareVersion[0] == '5' &&
1677          strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
1678         (Controller->FirmwareVersion[0] == '4' &&
1679          strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
1680         (Controller->FirmwareVersion[0] == '3' &&
1681          strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
1682         (Controller->FirmwareVersion[0] == '2' &&
1683          strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
1684     {
1685       DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
1686       DAC960_Error("Firmware Version = '%s'\n", Controller,
1687                    Controller->FirmwareVersion);
1688       free_dma_loaf(Controller->PCIDevice, &local_dma);
1689       return false;
1690     }
1691   /*
1692     Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
1693     Enclosure Management Enabled fields.
1694   */
1695   Controller->Channels = Enquiry2->ActualChannels;
1696   Controller->Targets = Enquiry2->MaxTargets;
1697   Controller->MemorySize = Enquiry2->MemorySize >> 20;
1698   Controller->V1.SAFTE_EnclosureManagementEnabled =
1699     (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
1700   /*
1701     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1702     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1703     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1704     less than the Controller Queue Depth to allow for an automatic drive
1705     rebuild operation.
1706   */
1707   Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
1708   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1709   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1710     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1711   Controller->LogicalDriveCount =
1712     Controller->V1.Enquiry.NumberOfLogicalDrives;
1713   Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
1714   Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
1715   Controller->DriverScatterGatherLimit =
1716     Controller->ControllerScatterGatherLimit;
1717   if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
1718     Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
1719   /*
1720     Initialize the Stripe Size, Segment Size, and Geometry Translation.
1721   */
1722   Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
1723                               >> (10 - DAC960_BlockSizeBits);
1724   Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
1725                                >> (10 - DAC960_BlockSizeBits);
1726   switch (Config2->DriveGeometry)
1727     {
1728     case DAC960_V1_Geometry_128_32:
1729       Controller->V1.GeometryTranslationHeads = 128;
1730       Controller->V1.GeometryTranslationSectors = 32;
1731       break;
1732     case DAC960_V1_Geometry_255_63:
1733       Controller->V1.GeometryTranslationHeads = 255;
1734       Controller->V1.GeometryTranslationSectors = 63;
1735       break;
1736     default:
1737       free_dma_loaf(Controller->PCIDevice, &local_dma);
1738       return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
1739     }
1740   /*
1741     Initialize the Background Initialization Status.
1742   */
1743   if ((Controller->FirmwareVersion[0] == '4' &&
1744       strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
1745       (Controller->FirmwareVersion[0] == '5' &&
1746        strcmp(Controller->FirmwareVersion, "5.08") >= 0))
1747     {
1748       Controller->V1.BackgroundInitializationStatusSupported = true;
1749       DAC960_V1_ExecuteType3B(Controller,
1750                               DAC960_V1_BackgroundInitializationControl, 0x20,
1751                               Controller->
1752                                V1.BackgroundInitializationStatusDMA);
1753       memcpy(&Controller->V1.LastBackgroundInitializationStatus,
1754                 Controller->V1.BackgroundInitializationStatus,
1755                 sizeof(DAC960_V1_BackgroundInitializationStatus_T));
1756     }
1757   /*
1758     Initialize the Logical Drive Initially Accessible flag.
1759   */
1760   for (LogicalDriveNumber = 0;
1761        LogicalDriveNumber < Controller->LogicalDriveCount;
1762        LogicalDriveNumber++)
1763     if (Controller->V1.LogicalDriveInformation
1764                        [LogicalDriveNumber].LogicalDriveState !=
1765         DAC960_V1_LogicalDrive_Offline)
1766       Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
1767   Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
1768   free_dma_loaf(Controller->PCIDevice, &local_dma);
1769   return true;
1770 }
1771
1772
1773 /*
1774   DAC960_V2_ReadControllerConfiguration reads the Configuration Information
1775   from DAC960 V2 Firmware Controllers and initializes the Controller structure.
1776 */
1777
1778 static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
1779                                                      *Controller)
1780 {
1781   DAC960_V2_ControllerInfo_T *ControllerInfo =
1782                 &Controller->V2.ControllerInformation;
1783   unsigned short LogicalDeviceNumber = 0;
1784   int ModelNameLength;
1785
1786   /* Get data into dma-able area, then copy into permanant location */
1787   if (!DAC960_V2_NewControllerInfo(Controller))
1788     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
1789   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
1790                         sizeof(DAC960_V2_ControllerInfo_T));
1791
1792
1793   if (!DAC960_V2_GeneralInfo(Controller))
1794     return DAC960_Failure(Controller, "GET HEALTH STATUS");
1795
1796   /*
1797     Initialize the Controller Model Name and Full Model Name fields.
1798   */
1799   ModelNameLength = sizeof(ControllerInfo->ControllerName);
1800   if (ModelNameLength > sizeof(Controller->ModelName)-1)
1801     ModelNameLength = sizeof(Controller->ModelName)-1;
1802   memcpy(Controller->ModelName, ControllerInfo->ControllerName,
1803          ModelNameLength);
1804   ModelNameLength--;
1805   while (Controller->ModelName[ModelNameLength] == ' ' ||
1806          Controller->ModelName[ModelNameLength] == '\0')
1807     ModelNameLength--;
1808   Controller->ModelName[++ModelNameLength] = '\0';
1809   strcpy(Controller->FullModelName, "Mylex ");
1810   strcat(Controller->FullModelName, Controller->ModelName);
1811   /*
1812     Initialize the Controller Firmware Version field.
1813   */
1814   sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
1815           ControllerInfo->FirmwareMajorVersion,
1816           ControllerInfo->FirmwareMinorVersion,
1817           ControllerInfo->FirmwareTurnNumber);
1818   if (ControllerInfo->FirmwareMajorVersion == 6 &&
1819       ControllerInfo->FirmwareMinorVersion == 0 &&
1820       ControllerInfo->FirmwareTurnNumber < 1)
1821     {
1822       DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
1823                   Controller, Controller->FirmwareVersion);
1824       DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
1825                   Controller);
1826       DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
1827                   Controller);
1828     }
1829   /*
1830     Initialize the Controller Channels, Targets, and Memory Size.
1831   */
1832   Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
1833   Controller->Targets =
1834     ControllerInfo->MaximumTargetsPerChannel
1835                     [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
1836   Controller->MemorySize = ControllerInfo->MemorySizeMB;
1837   /*
1838     Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
1839     Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
1840     Driver Scatter/Gather Limit.  The Driver Queue Depth must be at most one
1841     less than the Controller Queue Depth to allow for an automatic drive
1842     rebuild operation.
1843   */
1844   Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
1845   Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
1846   if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
1847     Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
1848   Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
1849   Controller->MaxBlocksPerCommand =
1850     ControllerInfo->MaximumDataTransferSizeInBlocks;
1851   Controller->ControllerScatterGatherLimit =
1852     ControllerInfo->MaximumScatterGatherEntries;
1853   Controller->DriverScatterGatherLimit =
1854     Controller->ControllerScatterGatherLimit;
1855   if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
1856     Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
1857   /*
1858     Initialize the Logical Device Information.
1859   */
1860   while (true)
1861     {
1862       DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
1863         Controller->V2.NewLogicalDeviceInformation;
1864       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
1865       DAC960_V2_PhysicalDevice_T PhysicalDevice;
1866
1867       if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
1868         break;
1869       LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
1870       if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
1871         DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
1872                        Controller, LogicalDeviceNumber);
1873                 break;
1874       }
1875       if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
1876         DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
1877               Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
1878         LogicalDeviceNumber++;
1879         continue;
1880       }
1881       PhysicalDevice.Controller = 0;
1882       PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
1883       PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
1884       PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
1885       Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
1886         PhysicalDevice;
1887       if (NewLogicalDeviceInfo->LogicalDeviceState !=
1888           DAC960_V2_LogicalDevice_Offline)
1889         Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
1890       LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
1891                                    GFP_ATOMIC);
1892       if (LogicalDeviceInfo == NULL)
1893         return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
1894       Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
1895         LogicalDeviceInfo;
1896       memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
1897              sizeof(DAC960_V2_LogicalDeviceInfo_T));
1898       LogicalDeviceNumber++;
1899     }
1900   return true;
1901 }
1902
1903
1904 /*
1905   DAC960_ReportControllerConfiguration reports the Configuration Information
1906   for Controller.
1907 */
1908
1909 static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
1910                                                     *Controller)
1911 {
1912   DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
1913               Controller, Controller->ModelName);
1914   DAC960_Info("  Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
1915               Controller, Controller->FirmwareVersion,
1916               Controller->Channels, Controller->MemorySize);
1917   DAC960_Info("  PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
1918               Controller, Controller->Bus,
1919               Controller->Device, Controller->Function);
1920   if (Controller->IO_Address == 0)
1921     DAC960_Info("Unassigned\n", Controller);
1922   else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
1923   DAC960_Info("  PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
1924               Controller, Controller->PCI_Address,
1925               (unsigned long) Controller->BaseAddress,
1926               Controller->IRQ_Channel);
1927   DAC960_Info("  Controller Queue Depth: %d, "
1928               "Maximum Blocks per Command: %d\n",
1929               Controller, Controller->ControllerQueueDepth,
1930               Controller->MaxBlocksPerCommand);
1931   DAC960_Info("  Driver Queue Depth: %d, "
1932               "Scatter/Gather Limit: %d of %d Segments\n",
1933               Controller, Controller->DriverQueueDepth,
1934               Controller->DriverScatterGatherLimit,
1935               Controller->ControllerScatterGatherLimit);
1936   if (Controller->FirmwareType == DAC960_V1_Controller)
1937     {
1938       DAC960_Info("  Stripe Size: %dKB, Segment Size: %dKB, "
1939                   "BIOS Geometry: %d/%d\n", Controller,
1940                   Controller->V1.StripeSize,
1941                   Controller->V1.SegmentSize,
1942                   Controller->V1.GeometryTranslationHeads,
1943                   Controller->V1.GeometryTranslationSectors);
1944       if (Controller->V1.SAFTE_EnclosureManagementEnabled)
1945         DAC960_Info("  SAF-TE Enclosure Management Enabled\n", Controller);
1946     }
1947   return true;
1948 }
1949
1950
1951 /*
1952   DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
1953   for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
1954   Inquiry Unit Serial Number information for each device connected to
1955   Controller.
1956 */
1957
1958 static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
1959                                                  *Controller)
1960 {
1961   struct dma_loaf local_dma;
1962
1963   dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
1964   DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
1965
1966   dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
1967   DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
1968
1969   dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
1970   DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
1971
1972   struct completion Completions[DAC960_V1_MaxChannels];
1973   unsigned long flags;
1974   int Channel, TargetID;
1975
1976   if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
1977                 DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
1978                         sizeof(DAC960_SCSI_Inquiry_T) +
1979                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
1980      return DAC960_Failure(Controller,
1981                         "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
1982
1983   for (Channel = 0; Channel < Controller->Channels; Channel++) {
1984         DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
1985                         sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
1986         SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
1987                         sizeof(DAC960_SCSI_Inquiry_T),
1988                         SCSI_Inquiry_dma + Channel);
1989         SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
1990                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
1991                         SCSI_NewInquiryUnitSerialNumberDMA + Channel);
1992   }
1993
1994   for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
1995     {
1996       /*
1997        * For each channel, submit a probe for a device on that channel.
1998        * The timeout interval for a device that is present is 10 seconds.
1999        * With this approach, the timeout periods can elapse in parallel
2000        * on each channel.
2001        */
2002       for (Channel = 0; Channel < Controller->Channels; Channel++)
2003         {
2004           dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
2005           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2006           dma_addr_t DCDB_dma = DCDBs_dma[Channel];
2007           DAC960_Command_T *Command = Controller->Commands[Channel];
2008           struct completion *Completion = &Completions[Channel];
2009
2010           init_completion(Completion);
2011           DAC960_V1_ClearCommand(Command);
2012           Command->CommandType = DAC960_ImmediateCommand;
2013           Command->Completion = Completion;
2014           Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
2015           Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
2016           DCDB->Channel = Channel;
2017           DCDB->TargetID = TargetID;
2018           DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
2019           DCDB->EarlyStatus = false;
2020           DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
2021           DCDB->NoAutomaticRequestSense = false;
2022           DCDB->DisconnectPermitted = true;
2023           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
2024           DCDB->BusAddress = NewInquiryStandardDataDMA;
2025           DCDB->CDBLength = 6;
2026           DCDB->TransferLengthHigh4 = 0;
2027           DCDB->SenseLength = sizeof(DCDB->SenseData);
2028           DCDB->CDB[0] = 0x12; /* INQUIRY */
2029           DCDB->CDB[1] = 0; /* EVPD = 0 */
2030           DCDB->CDB[2] = 0; /* Page Code */
2031           DCDB->CDB[3] = 0; /* Reserved */
2032           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
2033           DCDB->CDB[5] = 0; /* Control */
2034
2035           spin_lock_irqsave(&Controller->queue_lock, flags);
2036           DAC960_QueueCommand(Command);
2037           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2038         }
2039       /*
2040        * Wait for the problems submitted in the previous loop
2041        * to complete.  On the probes that are successful,
2042        * get the serial number of the device that was found.
2043        */
2044       for (Channel = 0; Channel < Controller->Channels; Channel++)
2045         {
2046           DAC960_SCSI_Inquiry_T *InquiryStandardData =
2047             &Controller->V1.InquiryStandardData[Channel][TargetID];
2048           DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
2049           dma_addr_t NewInquiryUnitSerialNumberDMA =
2050                         SCSI_NewInquiryUnitSerialNumberDMA[Channel];
2051           DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2052                         SCSI_NewInquiryUnitSerialNumberCPU[Channel];
2053           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2054             &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2055           DAC960_Command_T *Command = Controller->Commands[Channel];
2056           DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
2057           struct completion *Completion = &Completions[Channel];
2058
2059           wait_for_completion(Completion);
2060
2061           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2062             memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
2063             InquiryStandardData->PeripheralDeviceType = 0x1F;
2064             continue;
2065           } else
2066             memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
2067
2068           /* Preserve Channel and TargetID values from the previous loop */
2069           Command->Completion = Completion;
2070           DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2071           DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
2072           DCDB->SenseLength = sizeof(DCDB->SenseData);
2073           DCDB->CDB[0] = 0x12; /* INQUIRY */
2074           DCDB->CDB[1] = 1; /* EVPD = 1 */
2075           DCDB->CDB[2] = 0x80; /* Page Code */
2076           DCDB->CDB[3] = 0; /* Reserved */
2077           DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
2078           DCDB->CDB[5] = 0; /* Control */
2079
2080           spin_lock_irqsave(&Controller->queue_lock, flags);
2081           DAC960_QueueCommand(Command);
2082           spin_unlock_irqrestore(&Controller->queue_lock, flags);
2083           wait_for_completion(Completion);
2084
2085           if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
2086                 memset(InquiryUnitSerialNumber, 0,
2087                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2088                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2089           } else
2090                 memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2091                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2092         }
2093     }
2094     free_dma_loaf(Controller->PCIDevice, &local_dma);
2095   return true;
2096 }
2097
2098
2099 /*
2100   DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
2101   for DAC960 V2 Firmware Controllers by requesting the Physical Device
2102   Information and SCSI Inquiry Unit Serial Number information for each
2103   device connected to Controller.
2104 */
2105
2106 static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
2107                                                  *Controller)
2108 {
2109   unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
2110   unsigned short PhysicalDeviceIndex = 0;
2111
2112   while (true)
2113     {
2114       DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
2115                 Controller->V2.NewPhysicalDeviceInformation;
2116       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
2117       DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
2118                 Controller->V2.NewInquiryUnitSerialNumber;
2119       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
2120
2121       if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
2122           break;
2123
2124       PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
2125                                     GFP_ATOMIC);
2126       if (PhysicalDeviceInfo == NULL)
2127                 return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
2128       Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
2129                 PhysicalDeviceInfo;
2130       memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
2131                 sizeof(DAC960_V2_PhysicalDeviceInfo_T));
2132
2133       InquiryUnitSerialNumber = kmalloc(
2134               sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
2135       if (InquiryUnitSerialNumber == NULL) {
2136         kfree(PhysicalDeviceInfo);
2137         return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
2138       }
2139       Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
2140                 InquiryUnitSerialNumber;
2141
2142       Channel = NewPhysicalDeviceInfo->Channel;
2143       TargetID = NewPhysicalDeviceInfo->TargetID;
2144       LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
2145
2146       /*
2147          Some devices do NOT have Unit Serial Numbers.
2148          This command fails for them.  But, we still want to
2149          remember those devices are there.  Construct a
2150          UnitSerialNumber structure for the failure case.
2151       */
2152       if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
2153         memset(InquiryUnitSerialNumber, 0,
2154              sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2155         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
2156       } else
2157         memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
2158                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
2159
2160       PhysicalDeviceIndex++;
2161       LogicalUnit++;
2162     }
2163   return true;
2164 }
2165
2166
2167 /*
2168   DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
2169   Product Serial Number fields of the Inquiry Standard Data and Inquiry
2170   Unit Serial Number structures.
2171 */
2172
2173 static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
2174                                          *InquiryStandardData,
2175                                        DAC960_SCSI_Inquiry_UnitSerialNumber_T
2176                                          *InquiryUnitSerialNumber,
2177                                        unsigned char *Vendor,
2178                                        unsigned char *Model,
2179                                        unsigned char *Revision,
2180                                        unsigned char *SerialNumber)
2181 {
2182   int SerialNumberLength, i;
2183   if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
2184   for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
2185     {
2186       unsigned char VendorCharacter =
2187         InquiryStandardData->VendorIdentification[i];
2188       Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
2189                    ? VendorCharacter : ' ');
2190     }
2191   Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
2192   for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
2193     {
2194       unsigned char ModelCharacter =
2195         InquiryStandardData->ProductIdentification[i];
2196       Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
2197                   ? ModelCharacter : ' ');
2198     }
2199   Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
2200   for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
2201     {
2202       unsigned char RevisionCharacter =
2203         InquiryStandardData->ProductRevisionLevel[i];
2204       Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
2205                      ? RevisionCharacter : ' ');
2206     }
2207   Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
2208   if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
2209   SerialNumberLength = InquiryUnitSerialNumber->PageLength;
2210   if (SerialNumberLength >
2211       sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
2212     SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
2213   for (i = 0; i < SerialNumberLength; i++)
2214     {
2215       unsigned char SerialNumberCharacter =
2216         InquiryUnitSerialNumber->ProductSerialNumber[i];
2217       SerialNumber[i] =
2218         (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
2219          ? SerialNumberCharacter : ' ');
2220     }
2221   SerialNumber[SerialNumberLength] = '\0';
2222 }
2223
2224
2225 /*
2226   DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
2227   Information for DAC960 V1 Firmware Controllers.
2228 */
2229
2230 static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
2231                                                    *Controller)
2232 {
2233   int LogicalDriveNumber, Channel, TargetID;
2234   DAC960_Info("  Physical Devices:\n", Controller);
2235   for (Channel = 0; Channel < Controller->Channels; Channel++)
2236     for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
2237       {
2238         DAC960_SCSI_Inquiry_T *InquiryStandardData =
2239           &Controller->V1.InquiryStandardData[Channel][TargetID];
2240         DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2241           &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
2242         DAC960_V1_DeviceState_T *DeviceState =
2243           &Controller->V1.DeviceState[Channel][TargetID];
2244         DAC960_V1_ErrorTableEntry_T *ErrorEntry =
2245           &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
2246         char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2247         char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2248         char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2249         char SerialNumber[1+sizeof(InquiryUnitSerialNumber
2250                                    ->ProductSerialNumber)];
2251         if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
2252         DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2253                                    Vendor, Model, Revision, SerialNumber);
2254         DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2255                     Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
2256                     Vendor, Model, Revision);
2257         if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2258           DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2259         if (DeviceState->Present &&
2260             DeviceState->DeviceType == DAC960_V1_DiskType)
2261           {
2262             if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
2263               DAC960_Info("         Disk Status: %s, %u blocks, %d resets\n",
2264                           Controller,
2265                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2266                            ? "Dead"
2267                            : DeviceState->DeviceState
2268                              == DAC960_V1_Device_WriteOnly
2269                              ? "Write-Only"
2270                              : DeviceState->DeviceState
2271                                == DAC960_V1_Device_Online
2272                                ? "Online" : "Standby"),
2273                           DeviceState->DiskSize,
2274                           Controller->V1.DeviceResetCount[Channel][TargetID]);
2275             else
2276               DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2277                           (DeviceState->DeviceState == DAC960_V1_Device_Dead
2278                            ? "Dead"
2279                            : DeviceState->DeviceState
2280                              == DAC960_V1_Device_WriteOnly
2281                              ? "Write-Only"
2282                              : DeviceState->DeviceState
2283                                == DAC960_V1_Device_Online
2284                                ? "Online" : "Standby"),
2285                           DeviceState->DiskSize);
2286           }
2287         if (ErrorEntry->ParityErrorCount > 0 ||
2288             ErrorEntry->SoftErrorCount > 0 ||
2289             ErrorEntry->HardErrorCount > 0 ||
2290             ErrorEntry->MiscErrorCount > 0)
2291           DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2292                       "Hard: %d, Misc: %d\n", Controller,
2293                       ErrorEntry->ParityErrorCount,
2294                       ErrorEntry->SoftErrorCount,
2295                       ErrorEntry->HardErrorCount,
2296                       ErrorEntry->MiscErrorCount);
2297       }
2298   DAC960_Info("  Logical Drives:\n", Controller);
2299   for (LogicalDriveNumber = 0;
2300        LogicalDriveNumber < Controller->LogicalDriveCount;
2301        LogicalDriveNumber++)
2302     {
2303       DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
2304         &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
2305       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
2306                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2307                   LogicalDriveInformation->RAIDLevel,
2308                   (LogicalDriveInformation->LogicalDriveState
2309                    == DAC960_V1_LogicalDrive_Online
2310                    ? "Online"
2311                    : LogicalDriveInformation->LogicalDriveState
2312                      == DAC960_V1_LogicalDrive_Critical
2313                      ? "Critical" : "Offline"),
2314                   LogicalDriveInformation->LogicalDriveSize,
2315                   (LogicalDriveInformation->WriteBack
2316                    ? "Write Back" : "Write Thru"));
2317     }
2318   return true;
2319 }
2320
2321
2322 /*
2323   DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
2324   Information for DAC960 V2 Firmware Controllers.
2325 */
2326
2327 static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
2328                                                    *Controller)
2329 {
2330   int PhysicalDeviceIndex, LogicalDriveNumber;
2331   DAC960_Info("  Physical Devices:\n", Controller);
2332   for (PhysicalDeviceIndex = 0;
2333        PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
2334        PhysicalDeviceIndex++)
2335     {
2336       DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
2337         Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
2338       DAC960_SCSI_Inquiry_T *InquiryStandardData =
2339         (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
2340       DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
2341         Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
2342       char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
2343       char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
2344       char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
2345       char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
2346       if (PhysicalDeviceInfo == NULL) break;
2347       DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
2348                                  Vendor, Model, Revision, SerialNumber);
2349       DAC960_Info("    %d:%d%s Vendor: %s  Model: %s  Revision: %s\n",
2350                   Controller,
2351                   PhysicalDeviceInfo->Channel,
2352                   PhysicalDeviceInfo->TargetID,
2353                   (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
2354                   Vendor, Model, Revision);
2355       if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
2356         DAC960_Info("         %sAsynchronous\n", Controller,
2357                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2358                      ? "Wide " :""));
2359       else
2360         DAC960_Info("         %sSynchronous at %d MB/sec\n", Controller,
2361                     (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
2362                      ? "Wide " :""),
2363                     (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
2364                      * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
2365       if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
2366         DAC960_Info("         Serial Number: %s\n", Controller, SerialNumber);
2367       if (PhysicalDeviceInfo->PhysicalDeviceState ==
2368           DAC960_V2_Device_Unconfigured)
2369         continue;
2370       DAC960_Info("         Disk Status: %s, %u blocks\n", Controller,
2371                   (PhysicalDeviceInfo->PhysicalDeviceState
2372                    == DAC960_V2_Device_Online
2373                    ? "Online"
2374                    : PhysicalDeviceInfo->PhysicalDeviceState
2375                      == DAC960_V2_Device_Rebuild
2376                      ? "Rebuild"
2377                      : PhysicalDeviceInfo->PhysicalDeviceState
2378                        == DAC960_V2_Device_Missing
2379                        ? "Missing"
2380                        : PhysicalDeviceInfo->PhysicalDeviceState
2381                          == DAC960_V2_Device_Critical
2382                          ? "Critical"
2383                          : PhysicalDeviceInfo->PhysicalDeviceState
2384                            == DAC960_V2_Device_Dead
2385                            ? "Dead"
2386                            : PhysicalDeviceInfo->PhysicalDeviceState
2387                              == DAC960_V2_Device_SuspectedDead
2388                              ? "Suspected-Dead"
2389                              : PhysicalDeviceInfo->PhysicalDeviceState
2390                                == DAC960_V2_Device_CommandedOffline
2391                                ? "Commanded-Offline"
2392                                : PhysicalDeviceInfo->PhysicalDeviceState
2393                                  == DAC960_V2_Device_Standby
2394                                  ? "Standby" : "Unknown"),
2395                   PhysicalDeviceInfo->ConfigurableDeviceSize);
2396       if (PhysicalDeviceInfo->ParityErrors == 0 &&
2397           PhysicalDeviceInfo->SoftErrors == 0 &&
2398           PhysicalDeviceInfo->HardErrors == 0 &&
2399           PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
2400           PhysicalDeviceInfo->CommandTimeouts == 0 &&
2401           PhysicalDeviceInfo->Retries == 0 &&
2402           PhysicalDeviceInfo->Aborts == 0 &&
2403           PhysicalDeviceInfo->PredictedFailuresDetected == 0)
2404         continue;
2405       DAC960_Info("         Errors - Parity: %d, Soft: %d, "
2406                   "Hard: %d, Misc: %d\n", Controller,
2407                   PhysicalDeviceInfo->ParityErrors,
2408                   PhysicalDeviceInfo->SoftErrors,
2409                   PhysicalDeviceInfo->HardErrors,
2410                   PhysicalDeviceInfo->MiscellaneousErrors);
2411       DAC960_Info("                  Timeouts: %d, Retries: %d, "
2412                   "Aborts: %d, Predicted: %d\n", Controller,
2413                   PhysicalDeviceInfo->CommandTimeouts,
2414                   PhysicalDeviceInfo->Retries,
2415                   PhysicalDeviceInfo->Aborts,
2416                   PhysicalDeviceInfo->PredictedFailuresDetected);
2417     }
2418   DAC960_Info("  Logical Drives:\n", Controller);
2419   for (LogicalDriveNumber = 0;
2420        LogicalDriveNumber < DAC960_MaxLogicalDrives;
2421        LogicalDriveNumber++)
2422     {
2423       DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
2424         Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
2425       unsigned char *ReadCacheStatus[] = { "Read Cache Disabled",
2426                                            "Read Cache Enabled",
2427                                            "Read Ahead Enabled",
2428                                            "Intelligent Read Ahead Enabled",
2429                                            "-", "-", "-", "-" };
2430       unsigned char *WriteCacheStatus[] = { "Write Cache Disabled",
2431                                             "Logical Device Read Only",
2432                                             "Write Cache Enabled",
2433                                             "Intelligent Write Cache Enabled",
2434                                             "-", "-", "-", "-" };
2435       unsigned char *GeometryTranslation;
2436       if (LogicalDeviceInfo == NULL) continue;
2437       switch (LogicalDeviceInfo->DriveGeometry)
2438         {
2439         case DAC960_V2_Geometry_128_32:
2440           GeometryTranslation = "128/32";
2441           break;
2442         case DAC960_V2_Geometry_255_63:
2443           GeometryTranslation = "255/63";
2444           break;
2445         default:
2446           GeometryTranslation = "Invalid";
2447           DAC960_Error("Illegal Logical Device Geometry %d\n",
2448                        Controller, LogicalDeviceInfo->DriveGeometry);
2449           break;
2450         }
2451       DAC960_Info("    /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
2452                   Controller, Controller->ControllerNumber, LogicalDriveNumber,
2453                   LogicalDeviceInfo->RAIDLevel,
2454                   (LogicalDeviceInfo->LogicalDeviceState
2455                    == DAC960_V2_LogicalDevice_Online
2456                    ? "Online"
2457                    : LogicalDeviceInfo->LogicalDeviceState
2458                      == DAC960_V2_LogicalDevice_Critical
2459                      ? "Critical" : "Offline"),
2460                   LogicalDeviceInfo->ConfigurableDeviceSize);
2461       DAC960_Info("                  Logical Device %s, BIOS Geometry: %s\n",
2462                   Controller,
2463                   (LogicalDeviceInfo->LogicalDeviceControl
2464                                      .LogicalDeviceInitialized
2465                    ? "Initialized" : "Uninitialized"),
2466                   GeometryTranslation);
2467       if (LogicalDeviceInfo->StripeSize == 0)
2468         {
2469           if (LogicalDeviceInfo->CacheLineSize == 0)
2470             DAC960_Info("                  Stripe Size: N/A, "
2471                         "Segment Size: N/A\n", Controller);
2472           else
2473             DAC960_Info("                  Stripe Size: N/A, "
2474                         "Segment Size: %dKB\n", Controller,
2475                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2476         }
2477       else
2478         {
2479           if (LogicalDeviceInfo->CacheLineSize == 0)
2480             DAC960_Info("                  Stripe Size: %dKB, "
2481                         "Segment Size: N/A\n", Controller,
2482                         1 << (LogicalDeviceInfo->StripeSize - 2));
2483           else
2484             DAC960_Info("                  Stripe Size: %dKB, "
2485                         "Segment Size: %dKB\n", Controller,
2486                         1 << (LogicalDeviceInfo->StripeSize - 2),
2487                         1 << (LogicalDeviceInfo->CacheLineSize - 2));
2488         }
2489       DAC960_Info("                  %s, %s\n", Controller,
2490                   ReadCacheStatus[
2491                     LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
2492                   WriteCacheStatus[
2493                     LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
2494       if (LogicalDeviceInfo->SoftErrors > 0 ||
2495           LogicalDeviceInfo->CommandsFailed > 0 ||
2496           LogicalDeviceInfo->DeferredWriteErrors)
2497         DAC960_Info("                  Errors - Soft: %d, Failed: %d, "
2498                     "Deferred Write: %d\n", Controller,
2499                     LogicalDeviceInfo->SoftErrors,
2500                     LogicalDeviceInfo->CommandsFailed,
2501                     LogicalDeviceInfo->DeferredWriteErrors);
2502
2503     }
2504   return true;
2505 }
2506
2507 /*
2508   DAC960_RegisterBlockDevice registers the Block Device structures
2509   associated with Controller.
2510 */
2511
2512 static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
2513 {
2514   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2515   int n;
2516
2517   /*
2518     Register the Block Device Major Number for this DAC960 Controller.
2519   */
2520   if (register_blkdev(MajorNumber, "dac960") < 0)
2521       return false;
2522
2523   for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
2524         struct gendisk *disk = Controller->disks[n];
2525         struct request_queue *RequestQueue;
2526
2527         /* for now, let all request queues share controller's lock */
2528         RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
2529         if (!RequestQueue) {
2530                 printk("DAC960: failure to allocate request queue\n");
2531                 continue;
2532         }
2533         Controller->RequestQueue[n] = RequestQueue;
2534         blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
2535         RequestQueue->queuedata = Controller;
2536         blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2537         blk_queue_max_phys_segments(RequestQueue, Controller->DriverScatterGatherLimit);
2538         blk_queue_max_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
2539         disk->queue = RequestQueue;
2540         sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
2541         disk->major = MajorNumber;
2542         disk->first_minor = n << DAC960_MaxPartitionsBits;
2543         disk->fops = &DAC960_BlockDeviceOperations;
2544    }
2545   /*
2546     Indicate the Block Device Registration completed successfully,
2547   */
2548   return true;
2549 }
2550
2551
2552 /*
2553   DAC960_UnregisterBlockDevice unregisters the Block Device structures
2554   associated with Controller.
2555 */
2556
2557 static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
2558 {
2559   int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
2560   int disk;
2561
2562   /* does order matter when deleting gendisk and cleanup in request queue? */
2563   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
2564         del_gendisk(Controller->disks[disk]);
2565         blk_cleanup_queue(Controller->RequestQueue[disk]);
2566         Controller->RequestQueue[disk] = NULL;
2567   }
2568
2569   /*
2570     Unregister the Block Device Major Number for this DAC960 Controller.
2571   */
2572   unregister_blkdev(MajorNumber, "dac960");
2573 }
2574
2575 /*
2576   DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
2577   Information Partition Sector Counts and Block Sizes.
2578 */
2579
2580 static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
2581 {
2582         int disk;
2583         for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
2584                 set_capacity(Controller->disks[disk], disk_size(Controller, disk));
2585 }
2586
2587 /*
2588   DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
2589   the Error Status Register when the driver performs the BIOS handshaking.
2590   It returns true for fatal errors and false otherwise.
2591 */
2592
2593 static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
2594                                         unsigned char ErrorStatus,
2595                                         unsigned char Parameter0,
2596                                         unsigned char Parameter1)
2597 {
2598   switch (ErrorStatus)
2599     {
2600     case 0x00:
2601       DAC960_Notice("Physical Device %d:%d Not Responding\n",
2602                     Controller, Parameter1, Parameter0);
2603       break;
2604     case 0x08:
2605       if (Controller->DriveSpinUpMessageDisplayed) break;
2606       DAC960_Notice("Spinning Up Drives\n", Controller);
2607       Controller->DriveSpinUpMessageDisplayed = true;
2608       break;
2609     case 0x30:
2610       DAC960_Notice("Configuration Checksum Error\n", Controller);
2611       break;
2612     case 0x60:
2613       DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
2614       break;
2615     case 0x70:
2616       DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
2617       break;
2618     case 0x90:
2619       DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
2620                     Controller, Parameter1, Parameter0);
2621       break;
2622     case 0xA0:
2623       DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
2624       break;
2625     case 0xB0:
2626       DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
2627       break;
2628     case 0xD0:
2629       DAC960_Notice("New Controller Configuration Found\n", Controller);
2630       break;
2631     case 0xF0:
2632       DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
2633       return true;
2634     default:
2635       DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
2636                    Controller, ErrorStatus);
2637       return true;
2638     }
2639   return false;
2640 }
2641
2642
2643 /*
2644  * DAC960_DetectCleanup releases the resources that were allocated
2645  * during DAC960_DetectController().  DAC960_DetectController can
2646  * has several internal failure points, so not ALL resources may
2647  * have been allocated.  It's important to free only
2648  * resources that HAVE been allocated.  The code below always
2649  * tests that the resource has been allocated before attempting to
2650  * free it.
2651  */
2652 static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
2653 {
2654   int i;
2655
2656   /* Free the memory mailbox, status, and related structures */
2657   free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
2658   if (Controller->MemoryMappedAddress) {
2659         switch(Controller->HardwareType)
2660         {
2661                 case DAC960_GEM_Controller:
2662                         DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
2663                         break;
2664                 case DAC960_BA_Controller:
2665                         DAC960_BA_DisableInterrupts(Controller->BaseAddress);
2666                         break;
2667                 case DAC960_LP_Controller:
2668                         DAC960_LP_DisableInterrupts(Controller->BaseAddress);
2669                         break;
2670                 case DAC960_LA_Controller:
2671                         DAC960_LA_DisableInterrupts(Controller->BaseAddress);
2672                         break;
2673                 case DAC960_PG_Controller:
2674                         DAC960_PG_DisableInterrupts(Controller->BaseAddress);
2675                         break;
2676                 case DAC960_PD_Controller:
2677                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2678                         break;
2679                 case DAC960_P_Controller:
2680                         DAC960_PD_DisableInterrupts(Controller->BaseAddress);
2681                         break;
2682         }
2683         iounmap(Controller->MemoryMappedAddress);
2684   }
2685   if (Controller->IRQ_Channel)
2686         free_irq(Controller->IRQ_Channel, Controller);
2687   if (Controller->IO_Address)
2688         release_region(Controller->IO_Address, 0x80);
2689   pci_disable_device(Controller->PCIDevice);
2690   for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
2691        put_disk(Controller->disks[i]);
2692   DAC960_Controllers[Controller->ControllerNumber] = NULL;
2693   kfree(Controller);
2694 }
2695
2696
2697 /*
2698   DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
2699   PCI RAID Controllers by interrogating the PCI Configuration Space for
2700   Controller Type.
2701 */
2702
2703 static DAC960_Controller_T *
2704 DAC960_DetectController(struct pci_dev *PCI_Device,
2705                         const struct pci_device_id *entry)
2706 {
2707   struct DAC960_privdata *privdata =
2708                 (struct DAC960_privdata *)entry->driver_data;
2709   irq_handler_t InterruptHandler = privdata->InterruptHandler;
2710   unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
2711   DAC960_Controller_T *Controller = NULL;
2712   unsigned char DeviceFunction = PCI_Device->devfn;
2713   unsigned char ErrorStatus, Parameter0, Parameter1;
2714   unsigned int IRQ_Channel;
2715   void __iomem *BaseAddress;
2716   int i;
2717
2718   Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
2719   if (Controller == NULL) {
2720         DAC960_Error("Unable to allocate Controller structure for "
2721                        "Controller at\n", NULL);
2722         return NULL;
2723   }
2724   Controller->ControllerNumber = DAC960_ControllerCount;
2725   DAC960_Controllers[DAC960_ControllerCount++] = Controller;
2726   Controller->Bus = PCI_Device->bus->number;
2727   Controller->FirmwareType = privdata->FirmwareType;
2728   Controller->HardwareType = privdata->HardwareType;
2729   Controller->Device = DeviceFunction >> 3;
2730   Controller->Function = DeviceFunction & 0x7;
2731   Controller->PCIDevice = PCI_Device;
2732   strcpy(Controller->FullModelName, "DAC960");
2733
2734   if (pci_enable_device(PCI_Device))
2735         goto Failure;
2736
2737   switch (Controller->HardwareType)
2738   {
2739         case DAC960_GEM_Controller:
2740           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2741           break;
2742         case DAC960_BA_Controller:
2743           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2744           break;
2745         case DAC960_LP_Controller:
2746           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2747           break;
2748         case DAC960_LA_Controller:
2749           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2750           break;
2751         case DAC960_PG_Controller:
2752           Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
2753           break;
2754         case DAC960_PD_Controller:
2755           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2756           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2757           break;
2758         case DAC960_P_Controller:
2759           Controller->IO_Address = pci_resource_start(PCI_Device, 0);
2760           Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
2761           break;
2762   }
2763
2764   pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
2765   for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
2766         Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
2767         if (!Controller->disks[i])
2768                 goto Failure;
2769         Controller->disks[i]->private_data = (void *)((long)i);
2770   }
2771   init_waitqueue_head(&Controller->CommandWaitQueue);
2772   init_waitqueue_head(&Controller->HealthStatusWaitQueue);
2773   spin_lock_init(&Controller->queue_lock);
2774   DAC960_AnnounceDriver(Controller);
2775   /*
2776     Map the Controller Register Window.
2777   */
2778  if (MemoryWindowSize < PAGE_SIZE)
2779         MemoryWindowSize = PAGE_SIZE;
2780   Controller->MemoryMappedAddress =
2781         ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
2782   Controller->BaseAddress =
2783         Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
2784   if (Controller->MemoryMappedAddress == NULL)
2785   {
2786           DAC960_Error("Unable to map Controller Register Window for "
2787                        "Controller at\n", Controller);
2788           goto Failure;
2789   }
2790   BaseAddress = Controller->BaseAddress;
2791   switch (Controller->HardwareType)
2792   {
2793         case DAC960_GEM_Controller:
2794           DAC960_GEM_DisableInterrupts(BaseAddress);
2795           DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
2796           udelay(1000);
2797           while (DAC960_GEM_InitializationInProgressP(BaseAddress))
2798             {
2799               if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
2800                                             &Parameter0, &Parameter1) &&
2801                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2802                                            Parameter0, Parameter1))
2803                 goto Failure;
2804               udelay(10);
2805             }
2806           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2807             {
2808               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2809                            "for Controller at\n", Controller);
2810               goto Failure;
2811             }
2812           DAC960_GEM_EnableInterrupts(BaseAddress);
2813           Controller->QueueCommand = DAC960_GEM_QueueCommand;
2814           Controller->ReadControllerConfiguration =
2815             DAC960_V2_ReadControllerConfiguration;
2816           Controller->ReadDeviceConfiguration =
2817             DAC960_V2_ReadDeviceConfiguration;
2818           Controller->ReportDeviceConfiguration =
2819             DAC960_V2_ReportDeviceConfiguration;
2820           Controller->QueueReadWriteCommand =
2821             DAC960_V2_QueueReadWriteCommand;
2822           break;
2823         case DAC960_BA_Controller:
2824           DAC960_BA_DisableInterrupts(BaseAddress);
2825           DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2826           udelay(1000);
2827           while (DAC960_BA_InitializationInProgressP(BaseAddress))
2828             {
2829               if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2830                                             &Parameter0, &Parameter1) &&
2831                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2832                                            Parameter0, Parameter1))
2833                 goto Failure;
2834               udelay(10);
2835             }
2836           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2837             {
2838               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2839                            "for Controller at\n", Controller);
2840               goto Failure;
2841             }
2842           DAC960_BA_EnableInterrupts(BaseAddress);
2843           Controller->QueueCommand = DAC960_BA_QueueCommand;
2844           Controller->ReadControllerConfiguration =
2845             DAC960_V2_ReadControllerConfiguration;
2846           Controller->ReadDeviceConfiguration =
2847             DAC960_V2_ReadDeviceConfiguration;
2848           Controller->ReportDeviceConfiguration =
2849             DAC960_V2_ReportDeviceConfiguration;
2850           Controller->QueueReadWriteCommand =
2851             DAC960_V2_QueueReadWriteCommand;
2852           break;
2853         case DAC960_LP_Controller:
2854           DAC960_LP_DisableInterrupts(BaseAddress);
2855           DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
2856           udelay(1000);
2857           while (DAC960_LP_InitializationInProgressP(BaseAddress))
2858             {
2859               if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
2860                                             &Parameter0, &Parameter1) &&
2861                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2862                                            Parameter0, Parameter1))
2863                 goto Failure;
2864               udelay(10);
2865             }
2866           if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
2867             {
2868               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2869                            "for Controller at\n", Controller);
2870               goto Failure;
2871             }
2872           DAC960_LP_EnableInterrupts(BaseAddress);
2873           Controller->QueueCommand = DAC960_LP_QueueCommand;
2874           Controller->ReadControllerConfiguration =
2875             DAC960_V2_ReadControllerConfiguration;
2876           Controller->ReadDeviceConfiguration =
2877             DAC960_V2_ReadDeviceConfiguration;
2878           Controller->ReportDeviceConfiguration =
2879             DAC960_V2_ReportDeviceConfiguration;
2880           Controller->QueueReadWriteCommand =
2881             DAC960_V2_QueueReadWriteCommand;
2882           break;
2883         case DAC960_LA_Controller:
2884           DAC960_LA_DisableInterrupts(BaseAddress);
2885           DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
2886           udelay(1000);
2887           while (DAC960_LA_InitializationInProgressP(BaseAddress))
2888             {
2889               if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
2890                                             &Parameter0, &Parameter1) &&
2891                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2892                                            Parameter0, Parameter1))
2893                 goto Failure;
2894               udelay(10);
2895             }
2896           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2897             {
2898               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2899                            "for Controller at\n", Controller);
2900               goto Failure;
2901             }
2902           DAC960_LA_EnableInterrupts(BaseAddress);
2903           if (Controller->V1.DualModeMemoryMailboxInterface)
2904             Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
2905           else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
2906           Controller->ReadControllerConfiguration =
2907             DAC960_V1_ReadControllerConfiguration;
2908           Controller->ReadDeviceConfiguration =
2909             DAC960_V1_ReadDeviceConfiguration;
2910           Controller->ReportDeviceConfiguration =
2911             DAC960_V1_ReportDeviceConfiguration;
2912           Controller->QueueReadWriteCommand =
2913             DAC960_V1_QueueReadWriteCommand;
2914           break;
2915         case DAC960_PG_Controller:
2916           DAC960_PG_DisableInterrupts(BaseAddress);
2917           DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
2918           udelay(1000);
2919           while (DAC960_PG_InitializationInProgressP(BaseAddress))
2920             {
2921               if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
2922                                             &Parameter0, &Parameter1) &&
2923                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2924                                            Parameter0, Parameter1))
2925                 goto Failure;
2926               udelay(10);
2927             }
2928           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2929             {
2930               DAC960_Error("Unable to Enable Memory Mailbox Interface "
2931                            "for Controller at\n", Controller);
2932               goto Failure;
2933             }
2934           DAC960_PG_EnableInterrupts(BaseAddress);
2935           if (Controller->V1.DualModeMemoryMailboxInterface)
2936             Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
2937           else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
2938           Controller->ReadControllerConfiguration =
2939             DAC960_V1_ReadControllerConfiguration;
2940           Controller->ReadDeviceConfiguration =
2941             DAC960_V1_ReadDeviceConfiguration;
2942           Controller->ReportDeviceConfiguration =
2943             DAC960_V1_ReportDeviceConfiguration;
2944           Controller->QueueReadWriteCommand =
2945             DAC960_V1_QueueReadWriteCommand;
2946           break;
2947         case DAC960_PD_Controller:
2948           if (!request_region(Controller->IO_Address, 0x80,
2949                               Controller->FullModelName)) {
2950                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2951                              Controller, Controller->IO_Address);
2952                 goto Failure;
2953           }
2954           DAC960_PD_DisableInterrupts(BaseAddress);
2955           DAC960_PD_AcknowledgeStatus(BaseAddress);
2956           udelay(1000);
2957           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2958             {
2959               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2960                                             &Parameter0, &Parameter1) &&
2961                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2962                                            Parameter0, Parameter1))
2963                 goto Failure;
2964               udelay(10);
2965             }
2966           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
2967             {
2968               DAC960_Error("Unable to allocate DMA mapped memory "
2969                            "for Controller at\n", Controller);
2970               goto Failure;
2971             }
2972           DAC960_PD_EnableInterrupts(BaseAddress);
2973           Controller->QueueCommand = DAC960_PD_QueueCommand;
2974           Controller->ReadControllerConfiguration =
2975             DAC960_V1_ReadControllerConfiguration;
2976           Controller->ReadDeviceConfiguration =
2977             DAC960_V1_ReadDeviceConfiguration;
2978           Controller->ReportDeviceConfiguration =
2979             DAC960_V1_ReportDeviceConfiguration;
2980           Controller->QueueReadWriteCommand =
2981             DAC960_V1_QueueReadWriteCommand;
2982           break;
2983         case DAC960_P_Controller:
2984           if (!request_region(Controller->IO_Address, 0x80,
2985                               Controller->FullModelName)){
2986                 DAC960_Error("IO port 0x%d busy for Controller at\n",
2987                              Controller, Controller->IO_Address);
2988                 goto Failure;
2989           }
2990           DAC960_PD_DisableInterrupts(BaseAddress);
2991           DAC960_PD_AcknowledgeStatus(BaseAddress);
2992           udelay(1000);
2993           while (DAC960_PD_InitializationInProgressP(BaseAddress))
2994             {
2995               if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
2996                                             &Parameter0, &Parameter1) &&
2997                   DAC960_ReportErrorStatus(Controller, ErrorStatus,
2998                                            Parameter0, Parameter1))
2999                 goto Failure;
3000               udelay(10);
3001             }
3002           if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
3003             {
3004               DAC960_Error("Unable to allocate DMA mapped memory"
3005                            "for Controller at\n", Controller);
3006               goto Failure;
3007             }
3008           DAC960_PD_EnableInterrupts(BaseAddress);
3009           Controller->QueueCommand = DAC960_P_QueueCommand;
3010           Controller->ReadControllerConfiguration =
3011             DAC960_V1_ReadControllerConfiguration;
3012           Controller->ReadDeviceConfiguration =
3013             DAC960_V1_ReadDeviceConfiguration;
3014           Controller->ReportDeviceConfiguration =
3015             DAC960_V1_ReportDeviceConfiguration;
3016           Controller->QueueReadWriteCommand =
3017             DAC960_V1_QueueReadWriteCommand;
3018           break;
3019   }
3020   /*
3021      Acquire shared access to the IRQ Channel.
3022   */
3023   IRQ_Channel = PCI_Device->irq;
3024   if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
3025                       Controller->FullModelName, Controller) < 0)
3026   {
3027         DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
3028                        Controller, Controller->IRQ_Channel);
3029         goto Failure;
3030   }
3031   Controller->IRQ_Channel = IRQ_Channel;
3032   Controller->InitialCommand.CommandIdentifier = 1;
3033   Controller->InitialCommand.Controller = Controller;
3034   Controller->Commands[0] = &Controller->InitialCommand;
3035   Controller->FreeCommands = &Controller->InitialCommand;
3036   return Controller;
3037
3038 Failure:
3039   if (Controller->IO_Address == 0)
3040         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
3041                      "PCI Address 0x%X\n", Controller,
3042                      Controller->Bus, Controller->Device,
3043                      Controller->Function, Controller->PCI_Address);
3044   else
3045         DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
3046                         "0x%X PCI Address 0x%X\n", Controller,
3047                         Controller->Bus, Controller->Device,
3048                         Controller->Function, Controller->IO_Address,
3049                         Controller->PCI_Address);
3050   DAC960_DetectCleanup(Controller);
3051   DAC960_ControllerCount--;
3052   return NULL;
3053 }
3054
3055 /*
3056   DAC960_InitializeController initializes Controller.
3057 */
3058
3059 static bool
3060 DAC960_InitializeController(DAC960_Controller_T *Controller)
3061 {
3062   if (DAC960_ReadControllerConfiguration(Controller) &&
3063       DAC960_ReportControllerConfiguration(Controller) &&
3064       DAC960_CreateAuxiliaryStructures(Controller) &&
3065       DAC960_ReadDeviceConfiguration(Controller) &&
3066       DAC960_ReportDeviceConfiguration(Controller) &&
3067       DAC960_RegisterBlockDevice(Controller))
3068     {
3069       /*
3070         Initialize the Monitoring Timer.
3071       */
3072       init_timer(&Controller->MonitoringTimer);
3073       Controller->MonitoringTimer.expires =
3074         jiffies + DAC960_MonitoringTimerInterval;
3075       Controller->MonitoringTimer.data = (unsigned long) Controller;
3076       Controller->MonitoringTimer.function = DAC960_MonitoringTimerFunction;
3077       add_timer(&Controller->MonitoringTimer);
3078       Controller->ControllerInitialized = true;
3079       return true;
3080     }
3081   return false;
3082 }
3083
3084
3085 /*
3086   DAC960_FinalizeController finalizes Controller.
3087 */
3088
3089 static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
3090 {
3091   if (Controller->ControllerInitialized)
3092     {
3093       unsigned long flags;
3094
3095       /*
3096        * Acquiring and releasing lock here eliminates
3097        * a very low probability race.
3098        *
3099        * The code below allocates controller command structures
3100        * from the free list without holding the controller lock.
3101        * This is safe assuming there is no other activity on
3102        * the controller at the time.
3103        *
3104        * But, there might be a monitoring command still
3105        * in progress.  Setting the Shutdown flag while holding
3106        * the lock ensures that there is no monitoring command
3107        * in the interrupt handler currently, and any monitoring
3108        * commands that complete from this time on will NOT return
3109        * their command structure to the free list.
3110        */
3111
3112       spin_lock_irqsave(&Controller->queue_lock, flags);
3113       Controller->ShutdownMonitoringTimer = 1;
3114       spin_unlock_irqrestore(&Controller->queue_lock, flags);
3115
3116       del_timer_sync(&Controller->MonitoringTimer);
3117       if (Controller->FirmwareType == DAC960_V1_Controller)
3118         {
3119           DAC960_Notice("Flushing Cache...", Controller);
3120           DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
3121           DAC960_Notice("done\n", Controller);
3122
3123           if (Controller->HardwareType == DAC960_PD_Controller)
3124               release_region(Controller->IO_Address, 0x80);
3125         }
3126       else
3127         {
3128           DAC960_Notice("Flushing Cache...", Controller);
3129           DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
3130                                     DAC960_V2_RAID_Controller);
3131           DAC960_Notice("done\n", Controller);
3132         }
3133     }
3134   DAC960_UnregisterBlockDevice(Controller);
3135   DAC960_DestroyAuxiliaryStructures(Controller);
3136   DAC960_DestroyProcEntries(Controller);
3137   DAC960_DetectCleanup(Controller);
3138 }
3139
3140
3141 /*
3142   DAC960_Probe verifies controller's existence and
3143   initializes the DAC960 Driver for that controller.
3144 */
3145
3146 static int
3147 DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
3148 {
3149   int disk;
3150   DAC960_Controller_T *Controller;
3151
3152   if (DAC960_ControllerCount == DAC960_MaxControllers)
3153   {
3154         DAC960_Error("More than %d DAC960 Controllers detected - "
3155                        "ignoring from Controller at\n",
3156                        NULL, DAC960_MaxControllers);
3157         return -ENODEV;
3158   }
3159
3160   Controller = DAC960_DetectController(dev, entry);
3161   if (!Controller)
3162         return -ENODEV;
3163
3164   if (!DAC960_InitializeController(Controller)) {
3165         DAC960_FinalizeController(Controller);
3166         return -ENODEV;
3167   }
3168
3169   for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
3170         set_capacity(Controller->disks[disk], disk_size(Controller, disk));
3171         add_disk(Controller->disks[disk]);
3172   }
3173   DAC960_CreateProcEntries(Controller);
3174   return 0;
3175 }
3176
3177
3178 /*
3179   DAC960_Finalize finalizes the DAC960 Driver.
3180 */
3181
3182 static void DAC960_Remove(struct pci_dev *PCI_Device)
3183 {
3184   int Controller_Number = (long)pci_get_drvdata(PCI_Device);
3185   DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
3186   if (Controller != NULL)
3187       DAC960_FinalizeController(Controller);
3188 }
3189
3190
3191 /*
3192   DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
3193   DAC960 V1 Firmware Controllers.
3194 */
3195
3196 static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
3197 {
3198   DAC960_Controller_T *Controller = Command->Controller;
3199   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
3200   DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
3201                                         Command->V1.ScatterGatherList;
3202   struct scatterlist *ScatterList = Command->V1.ScatterList;
3203
3204   DAC960_V1_ClearCommand(Command);
3205
3206   if (Command->SegmentCount == 1)
3207     {
3208       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3209         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
3210       else
3211         CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
3212
3213       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3214       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3215       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3216       CommandMailbox->Type5.BusAddress =
3217                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3218     }
3219   else
3220     {
3221       int i;
3222
3223       if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3224         CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
3225       else
3226         CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
3227
3228       CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
3229       CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
3230       CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
3231       CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
3232
3233       CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
3234
3235       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3236                 ScatterGatherList->SegmentDataPointer =
3237                         (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
3238                 ScatterGatherList->SegmentByteCount =
3239                         (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
3240       }
3241     }
3242   DAC960_QueueCommand(Command);
3243 }
3244
3245
3246 /*
3247   DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
3248   DAC960 V2 Firmware Controllers.
3249 */
3250
3251 static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
3252 {
3253   DAC960_Controller_T *Controller = Command->Controller;
3254   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
3255   struct scatterlist *ScatterList = Command->V2.ScatterList;
3256
3257   DAC960_V2_ClearCommand(Command);
3258
3259   CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
3260   CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
3261     (Command->DmaDirection == PCI_DMA_FROMDEVICE);
3262   CommandMailbox->SCSI_10.DataTransferSize =
3263     Command->BlockCount << DAC960_BlockSizeBits;
3264   CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
3265   CommandMailbox->SCSI_10.PhysicalDevice =
3266     Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
3267   CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
3268   CommandMailbox->SCSI_10.CDBLength = 10;
3269   CommandMailbox->SCSI_10.SCSI_CDB[0] =
3270     (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
3271   CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
3272   CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
3273   CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
3274   CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
3275   CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
3276   CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
3277
3278   if (Command->SegmentCount == 1)
3279     {
3280       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3281                              .ScatterGatherSegments[0]
3282                              .SegmentDataPointer =
3283         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3284       CommandMailbox->SCSI_10.DataTransferMemoryAddress
3285                              .ScatterGatherSegments[0]
3286                              .SegmentByteCount =
3287         CommandMailbox->SCSI_10.DataTransferSize;
3288     }
3289   else
3290     {
3291       DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
3292       int i;
3293
3294       if (Command->SegmentCount > 2)
3295         {
3296           ScatterGatherList = Command->V2.ScatterGatherList;
3297           CommandMailbox->SCSI_10.CommandControlBits
3298                          .AdditionalScatterGatherListMemory = true;
3299           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3300                 .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
3301           CommandMailbox->SCSI_10.DataTransferMemoryAddress
3302                          .ExtendedScatterGather.ScatterGatherList0Address =
3303             Command->V2.ScatterGatherListDMA;
3304         }
3305       else
3306         ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
3307                                  .ScatterGatherSegments;
3308
3309       for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
3310                 ScatterGatherList->SegmentDataPointer =
3311                         (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
3312                 ScatterGatherList->SegmentByteCount =
3313                         (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
3314       }
3315     }
3316   DAC960_QueueCommand(Command);
3317 }
3318
3319
3320 static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
3321 {
3322         struct request *Request;
3323         DAC960_Command_T *Command;
3324
3325    while(1) {
3326         Request = blk_peek_request(req_q);
3327         if (!Request)
3328                 return 1;
3329
3330         Command = DAC960_AllocateCommand(Controller);
3331         if (Command == NULL)
3332                 return 0;
3333
3334         if (rq_data_dir(Request) == READ) {
3335                 Command->DmaDirection = PCI_DMA_FROMDEVICE;
3336                 Command->CommandType = DAC960_ReadCommand;
3337         } else {
3338                 Command->DmaDirection = PCI_DMA_TODEVICE;
3339                 Command->CommandType = DAC960_WriteCommand;
3340         }
3341         Command->Completion = Request->end_io_data;
3342         Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
3343         Command->BlockNumber = blk_rq_pos(Request);
3344         Command->BlockCount = blk_rq_sectors(Request);
3345         Command->Request = Request;
3346         blk_start_request(Request);
3347         Command->SegmentCount = blk_rq_map_sg(req_q,
3348                   Command->Request, Command->cmd_sglist);
3349         /* pci_map_sg MAY change the value of SegCount */
3350         Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
3351                  Command->SegmentCount, Command->DmaDirection);
3352
3353         DAC960_QueueReadWriteCommand(Command);
3354   }
3355 }
3356
3357 /*
3358   DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
3359   I/O Request Queue and queues it to the Controller.  WaitForCommand is true if
3360   this function should wait for a Command to become available if necessary.
3361   This function returns true if an I/O Request was queued and false otherwise.
3362 */
3363 static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
3364 {
3365         int i;
3366
3367         if (!controller->ControllerInitialized)
3368                 return;
3369
3370         /* Do this better later! */
3371         for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
3372                 struct request_queue *req_q = controller->RequestQueue[i];
3373
3374                 if (req_q == NULL)
3375                         continue;
3376
3377                 if (!DAC960_process_queue(controller, req_q)) {
3378                         controller->req_q_index = i;
3379                         return;
3380                 }
3381         }
3382
3383         if (controller->req_q_index == 0)
3384                 return;
3385
3386         for (i = 0; i < controller->req_q_index; i++) {
3387                 struct request_queue *req_q = controller->RequestQueue[i];
3388
3389                 if (req_q == NULL)
3390                         continue;
3391
3392                 if (!DAC960_process_queue(controller, req_q)) {
3393                         controller->req_q_index = i;
3394                         return;
3395                 }
3396         }
3397 }
3398
3399
3400 /*
3401   DAC960_queue_partial_rw extracts one bio from the request already
3402   associated with argument command, and construct a new command block to retry I/O
3403   only on that bio.  Queue that command to the controller.
3404
3405   This function re-uses a previously-allocated Command,
3406         there is no failure mode from trying to allocate a command.
3407 */
3408
3409 static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
3410 {
3411   DAC960_Controller_T *Controller = Command->Controller;
3412   struct request *Request = Command->Request;
3413   struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
3414
3415   if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
3416     Command->CommandType = DAC960_ReadRetryCommand;
3417   else
3418     Command->CommandType = DAC960_WriteRetryCommand;
3419
3420   /*
3421    * We could be more efficient with these mapping requests
3422    * and map only the portions that we need.  But since this
3423    * code should almost never be called, just go with a
3424    * simple coding.
3425    */
3426   (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
3427
3428   (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
3429   /*
3430    * Resubmitting the request sector at a time is really tedious.
3431    * But, this should almost never happen.  So, we're willing to pay
3432    * this price so that in the end, as much of the transfer is completed
3433    * successfully as possible.
3434    */
3435   Command->SegmentCount = 1;
3436   Command->BlockNumber = blk_rq_pos(Request);
3437   Command->BlockCount = 1;
3438   DAC960_QueueReadWriteCommand(Command);
3439   return;
3440 }
3441
3442 /*
3443   DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
3444 */
3445
3446 static void DAC960_RequestFunction(struct request_queue *RequestQueue)
3447 {
3448         DAC960_ProcessRequest(RequestQueue->queuedata);
3449 }
3450
3451 /*
3452   DAC960_ProcessCompletedBuffer performs completion processing for an
3453   individual Buffer.
3454 */
3455
3456 static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
3457                                                  bool SuccessfulIO)
3458 {
3459         struct request *Request = Command->Request;
3460         int Error = SuccessfulIO ? 0 : -EIO;
3461
3462         pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
3463                 Command->SegmentCount, Command->DmaDirection);
3464
3465          if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
3466                 if (Command->Completion) {
3467                         complete(Command->Completion);
3468                         Command->Completion = NULL;
3469                 }
3470                 return true;
3471         }
3472         return false;
3473 }
3474
3475 /*
3476   DAC960_V1_ReadWriteError prints an appropriate error message for Command
3477   when an error occurs on a Read or Write operation.
3478 */
3479
3480 static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
3481 {
3482   DAC960_Controller_T *Controller = Command->Controller;
3483   unsigned char *CommandName = "UNKNOWN";
3484   switch (Command->CommandType)
3485     {
3486     case DAC960_ReadCommand:
3487     case DAC960_ReadRetryCommand:
3488       CommandName = "READ";
3489       break;
3490     case DAC960_WriteCommand:
3491     case DAC960_WriteRetryCommand:
3492       CommandName = "WRITE";
3493       break;
3494     case DAC960_MonitoringCommand:
3495     case DAC960_ImmediateCommand:
3496     case DAC960_QueuedCommand:
3497       break;
3498     }
3499   switch (Command->V1.CommandStatus)
3500     {
3501     case DAC960_V1_IrrecoverableDataError:
3502       DAC960_Error("Irrecoverable Data Error on %s:\n",
3503                    Controller, CommandName);
3504       break;
3505     case DAC960_V1_LogicalDriveNonexistentOrOffline:
3506       DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
3507                    Controller, CommandName);
3508       break;
3509     case DAC960_V1_AccessBeyondEndOfLogicalDrive:
3510       DAC960_Error("Attempt to Access Beyond End of Logical Drive "
3511                    "on %s:\n", Controller, CommandName);
3512       break;
3513     case DAC960_V1_BadDataEncountered:
3514       DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
3515       break;
3516     default:
3517       DAC960_Error("Unexpected Error Status %04X on %s:\n",
3518                    Controller, Command->V1.CommandStatus, CommandName);
3519       break;
3520     }
3521   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
3522                Controller, Controller->ControllerNumber,
3523                Command->LogicalDriveNumber, Command->BlockNumber,
3524                Command->BlockNumber + Command->BlockCount - 1);
3525 }
3526
3527
3528 /*
3529   DAC960_V1_ProcessCompletedCommand performs completion processing for Command
3530   for DAC960 V1 Firmware Controllers.
3531 */
3532
3533 static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
3534 {
3535   DAC960_Controller_T *Controller = Command->Controller;
3536   DAC960_CommandType_T CommandType = Command->CommandType;
3537   DAC960_V1_CommandOpcode_T CommandOpcode =
3538     Command->V1.CommandMailbox.Common.CommandOpcode;
3539   DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
3540
3541   if (CommandType == DAC960_ReadCommand ||
3542       CommandType == DAC960_WriteCommand)
3543     {
3544
3545 #ifdef FORCE_RETRY_DEBUG
3546       CommandStatus = DAC960_V1_IrrecoverableDataError;
3547 #endif
3548
3549       if (CommandStatus == DAC960_V1_NormalCompletion) {
3550
3551                 if (!DAC960_ProcessCompletedRequest(Command, true))
3552                         BUG();
3553
3554       } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
3555                 CommandStatus == DAC960_V1_BadDataEncountered)
3556         {
3557           /*
3558            * break the command down into pieces and resubmit each
3559            * piece, hoping that some of them will succeed.
3560            */
3561            DAC960_queue_partial_rw(Command);
3562            return;
3563         }
3564       else
3565         {
3566           if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3567             DAC960_V1_ReadWriteError(Command);
3568
3569          if (!DAC960_ProcessCompletedRequest(Command, false))
3570                 BUG();
3571         }
3572     }
3573   else if (CommandType == DAC960_ReadRetryCommand ||
3574            CommandType == DAC960_WriteRetryCommand)
3575     {
3576       bool normal_completion;
3577 #ifdef FORCE_RETRY_FAILURE_DEBUG
3578       static int retry_count = 1;
3579 #endif
3580       /*
3581         Perform completion processing for the portion that was
3582         retried, and submit the next portion, if any.
3583       */
3584       normal_completion = true;
3585       if (CommandStatus != DAC960_V1_NormalCompletion) {
3586         normal_completion = false;
3587         if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
3588             DAC960_V1_ReadWriteError(Command);
3589       }
3590
3591 #ifdef FORCE_RETRY_FAILURE_DEBUG
3592       if (!(++retry_count % 10000)) {
3593               printk("V1 error retry failure test\n");
3594               normal_completion = false;
3595               DAC960_V1_ReadWriteError(Command);
3596       }
3597 #endif
3598
3599       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
3600         DAC960_queue_partial_rw(Command);
3601         return;
3602       }
3603     }
3604
3605   else if (CommandType == DAC960_MonitoringCommand)
3606     {
3607       if (Controller->ShutdownMonitoringTimer)
3608               return;
3609       if (CommandOpcode == DAC960_V1_Enquiry)
3610         {
3611           DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
3612           DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
3613           unsigned int OldCriticalLogicalDriveCount =
3614             OldEnquiry->CriticalLogicalDriveCount;
3615           unsigned int NewCriticalLogicalDriveCount =
3616             NewEnquiry->CriticalLogicalDriveCount;
3617           if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
3618             {
3619               int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
3620               while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
3621                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3622                                 "Now Exists\n", Controller,
3623                                 LogicalDriveNumber,
3624                                 Controller->ControllerNumber,
3625                                 LogicalDriveNumber);
3626               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3627               DAC960_ComputeGenericDiskInfo(Controller);
3628             }
3629           if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
3630             {
3631               int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
3632               while (++LogicalDriveNumber < Controller->LogicalDriveCount)
3633                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3634                                 "No Longer Exists\n", Controller,
3635                                 LogicalDriveNumber,
3636                                 Controller->ControllerNumber,
3637                                 LogicalDriveNumber);
3638               Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
3639               DAC960_ComputeGenericDiskInfo(Controller);
3640             }
3641           if (NewEnquiry->StatusFlags.DeferredWriteError !=
3642               OldEnquiry->StatusFlags.DeferredWriteError)
3643             DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
3644                             (NewEnquiry->StatusFlags.DeferredWriteError
3645                              ? "TRUE" : "FALSE"));
3646           if ((NewCriticalLogicalDriveCount > 0 ||
3647                NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
3648               (NewEnquiry->OfflineLogicalDriveCount > 0 ||
3649                NewEnquiry->OfflineLogicalDriveCount !=
3650                OldEnquiry->OfflineLogicalDriveCount) ||
3651               (NewEnquiry->DeadDriveCount > 0 ||
3652                NewEnquiry->DeadDriveCount !=
3653                OldEnquiry->DeadDriveCount) ||
3654               (NewEnquiry->EventLogSequenceNumber !=
3655                OldEnquiry->EventLogSequenceNumber) ||
3656               Controller->MonitoringTimerCount == 0 ||
3657               time_after_eq(jiffies, Controller->SecondaryMonitoringTime
3658                + DAC960_SecondaryMonitoringInterval))
3659             {
3660               Controller->V1.NeedLogicalDriveInformation = true;
3661               Controller->V1.NewEventLogSequenceNumber =
3662                 NewEnquiry->EventLogSequenceNumber;
3663               Controller->V1.NeedErrorTableInformation = true;
3664               Controller->V1.NeedDeviceStateInformation = true;
3665               Controller->V1.StartDeviceStateScan = true;
3666               Controller->V1.NeedBackgroundInitializationStatus =
3667                 Controller->V1.BackgroundInitializationStatusSupported;
3668               Controller->SecondaryMonitoringTime = jiffies;
3669             }
3670           if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3671               NewEnquiry->RebuildFlag
3672               == DAC960_V1_BackgroundRebuildInProgress ||
3673               OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
3674               OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
3675             {
3676               Controller->V1.NeedRebuildProgress = true;
3677               Controller->V1.RebuildProgressFirst =
3678                 (NewEnquiry->CriticalLogicalDriveCount <
3679                  OldEnquiry->CriticalLogicalDriveCount);
3680             }
3681           if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
3682             switch (NewEnquiry->RebuildFlag)
3683               {
3684               case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
3685                 DAC960_Progress("Consistency Check Completed Successfully\n",
3686                                 Controller);
3687                 break;
3688               case DAC960_V1_StandbyRebuildInProgress:
3689               case DAC960_V1_BackgroundRebuildInProgress:
3690                 break;
3691               case DAC960_V1_BackgroundCheckInProgress:
3692                 Controller->V1.NeedConsistencyCheckProgress = true;
3693                 break;
3694               case DAC960_V1_StandbyRebuildCompletedWithError:
3695                 DAC960_Progress("Consistency Check Completed with Error\n",
3696                                 Controller);
3697                 break;
3698               case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
3699                 DAC960_Progress("Consistency Check Failed - "
3700                                 "Physical Device Failed\n", Controller);
3701                 break;
3702               case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
3703                 DAC960_Progress("Consistency Check Failed - "
3704                                 "Logical Drive Failed\n", Controller);
3705                 break;
3706               case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
3707                 DAC960_Progress("Consistency Check Failed - Other Causes\n",
3708                                 Controller);
3709                 break;
3710               case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
3711                 DAC960_Progress("Consistency Check Successfully Terminated\n",
3712                                 Controller);
3713                 break;
3714               }
3715           else if (NewEnquiry->RebuildFlag
3716                    == DAC960_V1_BackgroundCheckInProgress)
3717             Controller->V1.NeedConsistencyCheckProgress = true;
3718           Controller->MonitoringAlertMode =
3719             (NewEnquiry->CriticalLogicalDriveCount > 0 ||
3720              NewEnquiry->OfflineLogicalDriveCount > 0 ||
3721              NewEnquiry->DeadDriveCount > 0);
3722           if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
3723             {
3724               Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
3725               Controller->V1.RebuildFlagPending = true;
3726             }
3727           memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
3728                  sizeof(DAC960_V1_Enquiry_T));
3729         }
3730       else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
3731         {
3732           static char
3733             *DAC960_EventMessages[] =
3734                { "killed because write recovery failed",
3735                  "killed because of SCSI bus reset failure",
3736                  "killed because of double check condition",
3737                  "killed because it was removed",
3738                  "killed because of gross error on SCSI chip",
3739                  "killed because of bad tag returned from drive",
3740                  "killed because of timeout on SCSI command",
3741                  "killed because of reset SCSI command issued from system",
3742                  "killed because busy or parity error count exceeded limit",
3743                  "killed because of 'kill drive' command from system",
3744                  "killed because of selection timeout",
3745                  "killed due to SCSI phase sequence error",
3746                  "killed due to unknown status" };
3747           DAC960_V1_EventLogEntry_T *EventLogEntry =
3748                 Controller->V1.EventLogEntry;
3749           if (EventLogEntry->SequenceNumber ==
3750               Controller->V1.OldEventLogSequenceNumber)
3751             {
3752               unsigned char SenseKey = EventLogEntry->SenseKey;
3753               unsigned char AdditionalSenseCode =
3754                 EventLogEntry->AdditionalSenseCode;
3755               unsigned char AdditionalSenseCodeQualifier =
3756                 EventLogEntry->AdditionalSenseCodeQualifier;
3757               if (SenseKey == DAC960_SenseKey_VendorSpecific &&
3758                   AdditionalSenseCode == 0x80 &&
3759                   AdditionalSenseCodeQualifier <
3760                   ARRAY_SIZE(DAC960_EventMessages))
3761                 DAC960_Critical("Physical Device %d:%d %s\n", Controller,
3762                                 EventLogEntry->Channel,
3763                                 EventLogEntry->TargetID,
3764                                 DAC960_EventMessages[
3765                                   AdditionalSenseCodeQualifier]);
3766               else if (SenseKey == DAC960_SenseKey_UnitAttention &&
3767                        AdditionalSenseCode == 0x29)
3768                 {
3769                   if (Controller->MonitoringTimerCount > 0)
3770                     Controller->V1.DeviceResetCount[EventLogEntry->Channel]
3771                                                    [EventLogEntry->TargetID]++;
3772                 }
3773               else if (!(SenseKey == DAC960_SenseKey_NoSense ||
3774                          (SenseKey == DAC960_SenseKey_NotReady &&
3775                           AdditionalSenseCode == 0x04 &&
3776                           (AdditionalSenseCodeQualifier == 0x01 ||
3777                            AdditionalSenseCodeQualifier == 0x02))))
3778                 {
3779                   DAC960_Critical("Physical Device %d:%d Error Log: "
3780                                   "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
3781                                   Controller,
3782                                   EventLogEntry->Channel,
3783                                   EventLogEntry->TargetID,
3784                                   SenseKey,
3785                                   AdditionalSenseCode,
3786                                   AdditionalSenseCodeQualifier);
3787                   DAC960_Critical("Physical Device %d:%d Error Log: "
3788                                   "Information = %02X%02X%02X%02X "
3789                                   "%02X%02X%02X%02X\n",
3790                                   Controller,
3791                                   EventLogEntry->Channel,
3792                                   EventLogEntry->TargetID,
3793                                   EventLogEntry->Information[0],
3794                                   EventLogEntry->Information[1],
3795                                   EventLogEntry->Information[2],
3796                                   EventLogEntry->Information[3],
3797                                   EventLogEntry->CommandSpecificInformation[0],
3798                                   EventLogEntry->CommandSpecificInformation[1],
3799                                   EventLogEntry->CommandSpecificInformation[2],
3800                                   EventLogEntry->CommandSpecificInformation[3]);
3801                 }
3802             }
3803           Controller->V1.OldEventLogSequenceNumber++;
3804         }
3805       else if (CommandOpcode == DAC960_V1_GetErrorTable)
3806         {
3807           DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
3808           DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
3809           int Channel, TargetID;
3810           for (Channel = 0; Channel < Controller->Channels; Channel++)
3811             for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
3812               {
3813                 DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
3814                   &NewErrorTable->ErrorTableEntries[Channel][TargetID];
3815                 DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
3816                   &OldErrorTable->ErrorTableEntries[Channel][TargetID];
3817                 if ((NewErrorEntry->ParityErrorCount !=
3818                      OldErrorEntry->ParityErrorCount) ||
3819                     (NewErrorEntry->SoftErrorCount !=
3820                      OldErrorEntry->SoftErrorCount) ||
3821                     (NewErrorEntry->HardErrorCount !=
3822                      OldErrorEntry->HardErrorCount) ||
3823                     (NewErrorEntry->MiscErrorCount !=
3824                      OldErrorEntry->MiscErrorCount))
3825                   DAC960_Critical("Physical Device %d:%d Errors: "
3826                                   "Parity = %d, Soft = %d, "
3827                                   "Hard = %d, Misc = %d\n",
3828                                   Controller, Channel, TargetID,
3829                                   NewErrorEntry->ParityErrorCount,
3830                                   NewErrorEntry->SoftErrorCount,
3831                                   NewErrorEntry->HardErrorCount,
3832                                   NewErrorEntry->MiscErrorCount);
3833               }
3834           memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
3835                  sizeof(DAC960_V1_ErrorTable_T));
3836         }
3837       else if (CommandOpcode == DAC960_V1_GetDeviceState)
3838         {
3839           DAC960_V1_DeviceState_T *OldDeviceState =
3840             &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
3841                                        [Controller->V1.DeviceStateTargetID];
3842           DAC960_V1_DeviceState_T *NewDeviceState =
3843             Controller->V1.NewDeviceState;
3844           if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
3845             DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
3846                             Controller->V1.DeviceStateChannel,
3847                             Controller->V1.DeviceStateTargetID,
3848                             (NewDeviceState->DeviceState
3849                              == DAC960_V1_Device_Dead
3850                              ? "DEAD"
3851                              : NewDeviceState->DeviceState
3852                                == DAC960_V1_Device_WriteOnly
3853                                ? "WRITE-ONLY"
3854                                : NewDeviceState->DeviceState
3855                                  == DAC960_V1_Device_Online
3856                                  ? "ONLINE" : "STANDBY"));
3857           if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
3858               NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
3859             {
3860               Controller->V1.NeedDeviceInquiryInformation = true;
3861               Controller->V1.NeedDeviceSerialNumberInformation = true;
3862               Controller->V1.DeviceResetCount
3863                              [Controller->V1.DeviceStateChannel]
3864                              [Controller->V1.DeviceStateTargetID] = 0;
3865             }
3866           memcpy(OldDeviceState, NewDeviceState,
3867                  sizeof(DAC960_V1_DeviceState_T));
3868         }
3869       else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
3870         {
3871           int LogicalDriveNumber;
3872           for (LogicalDriveNumber = 0;
3873                LogicalDriveNumber < Controller->LogicalDriveCount;
3874                LogicalDriveNumber++)
3875             {
3876               DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
3877                 &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
3878               DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
3879                 &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
3880               if (NewLogicalDriveInformation->LogicalDriveState !=
3881                   OldLogicalDriveInformation->LogicalDriveState)
3882                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3883                                 "is now %s\n", Controller,
3884                                 LogicalDriveNumber,
3885                                 Controller->ControllerNumber,
3886                                 LogicalDriveNumber,
3887                                 (NewLogicalDriveInformation->LogicalDriveState
3888                                  == DAC960_V1_LogicalDrive_Online
3889                                  ? "ONLINE"
3890                                  : NewLogicalDriveInformation->LogicalDriveState
3891                                    == DAC960_V1_LogicalDrive_Critical
3892                                    ? "CRITICAL" : "OFFLINE"));
3893               if (NewLogicalDriveInformation->WriteBack !=
3894                   OldLogicalDriveInformation->WriteBack)
3895                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
3896                                 "is now %s\n", Controller,
3897                                 LogicalDriveNumber,
3898                                 Controller->ControllerNumber,
3899                                 LogicalDriveNumber,
3900                                 (NewLogicalDriveInformation->WriteBack
3901                                  ? "WRITE BACK" : "WRITE THRU"));
3902             }
3903           memcpy(&Controller->V1.LogicalDriveInformation,
3904                  Controller->V1.NewLogicalDriveInformation,
3905                  sizeof(DAC960_V1_LogicalDriveInformationArray_T));
3906         }
3907       else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
3908         {
3909           unsigned int LogicalDriveNumber =
3910             Controller->V1.RebuildProgress->LogicalDriveNumber;
3911           unsigned int LogicalDriveSize =
3912             Controller->V1.RebuildProgress->LogicalDriveSize;
3913           unsigned int BlocksCompleted =
3914             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3915           if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
3916               Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
3917             CommandStatus = DAC960_V1_RebuildSuccessful;
3918           switch (CommandStatus)
3919             {
3920             case DAC960_V1_NormalCompletion:
3921               Controller->EphemeralProgressMessage = true;
3922               DAC960_Progress("Rebuild in Progress: "
3923                               "Logical Drive %d (/dev/rd/c%dd%d) "
3924                               "%d%% completed\n",
3925                               Controller, LogicalDriveNumber,
3926                               Controller->ControllerNumber,
3927                               LogicalDriveNumber,
3928                               (100 * (BlocksCompleted >> 7))
3929                               / (LogicalDriveSize >> 7));
3930               Controller->EphemeralProgressMessage = false;
3931               break;
3932             case DAC960_V1_RebuildFailed_LogicalDriveFailure:
3933               DAC960_Progress("Rebuild Failed due to "
3934                               "Logical Drive Failure\n", Controller);
3935               break;
3936             case DAC960_V1_RebuildFailed_BadBlocksOnOther:
3937               DAC960_Progress("Rebuild Failed due to "
3938                               "Bad Blocks on Other Drives\n", Controller);
3939               break;
3940             case DAC960_V1_RebuildFailed_NewDriveFailed:
3941               DAC960_Progress("Rebuild Failed due to "
3942                               "Failure of Drive Being Rebuilt\n", Controller);
3943               break;
3944             case DAC960_V1_NoRebuildOrCheckInProgress:
3945               break;
3946             case DAC960_V1_RebuildSuccessful:
3947               DAC960_Progress("Rebuild Completed Successfully\n", Controller);
3948               break;
3949             case DAC960_V1_RebuildSuccessfullyTerminated:
3950               DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
3951               break;
3952             }
3953           Controller->V1.LastRebuildStatus = CommandStatus;
3954           if (CommandType != DAC960_MonitoringCommand &&
3955               Controller->V1.RebuildStatusPending)
3956             {
3957               Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
3958               Controller->V1.RebuildStatusPending = false;
3959             }
3960           else if (CommandType == DAC960_MonitoringCommand &&
3961                    CommandStatus != DAC960_V1_NormalCompletion &&
3962                    CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
3963             {
3964               Controller->V1.PendingRebuildStatus = CommandStatus;
3965               Controller->V1.RebuildStatusPending = true;
3966             }
3967         }
3968       else if (CommandOpcode == DAC960_V1_RebuildStat)
3969         {
3970           unsigned int LogicalDriveNumber =
3971             Controller->V1.RebuildProgress->LogicalDriveNumber;
3972           unsigned int LogicalDriveSize =
3973             Controller->V1.RebuildProgress->LogicalDriveSize;
3974           unsigned int BlocksCompleted =
3975             LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
3976           if (CommandStatus == DAC960_V1_NormalCompletion)
3977             {
3978               Controller->EphemeralProgressMessage = true;
3979               DAC960_Progress("Consistency Check in Progress: "
3980                               "Logical Drive %d (/dev/rd/c%dd%d) "
3981                               "%d%% completed\n",
3982                               Controller, LogicalDriveNumber,
3983                               Controller->ControllerNumber,
3984                               LogicalDriveNumber,
3985                               (100 * (BlocksCompleted >> 7))
3986                               / (LogicalDriveSize >> 7));
3987               Controller->EphemeralProgressMessage = false;
3988             }
3989         }
3990       else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
3991         {
3992           unsigned int LogicalDriveNumber =
3993             Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
3994           unsigned int LogicalDriveSize =
3995             Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
3996           unsigned int BlocksCompleted =
3997             Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
3998           switch (CommandStatus)
3999             {
4000             case DAC960_V1_NormalCompletion:
4001               switch (Controller->V1.BackgroundInitializationStatus->Status)
4002                 {
4003                 case DAC960_V1_BackgroundInitializationInvalid:
4004                   break;
4005                 case DAC960_V1_BackgroundInitializationStarted:
4006                   DAC960_Progress("Background Initialization Started\n",
4007                                   Controller);
4008                   break;
4009                 case DAC960_V1_BackgroundInitializationInProgress:
4010                   if (BlocksCompleted ==
4011                       Controller->V1.LastBackgroundInitializationStatus.
4012                                 BlocksCompleted &&
4013                       LogicalDriveNumber ==
4014                       Controller->V1.LastBackgroundInitializationStatus.
4015                                 LogicalDriveNumber)
4016                     break;
4017                   Controller->EphemeralProgressMessage = true;
4018                   DAC960_Progress("Background Initialization in Progress: "
4019                                   "Logical Drive %d (/dev/rd/c%dd%d) "
4020                                   "%d%% completed\n",
4021                                   Controller, LogicalDriveNumber,
4022                                   Controller->ControllerNumber,
4023                                   LogicalDriveNumber,
4024                                   (100 * (BlocksCompleted >> 7))
4025                                   / (LogicalDriveSize >> 7));
4026                   Controller->EphemeralProgressMessage = false;
4027                   break;
4028                 case DAC960_V1_BackgroundInitializationSuspended:
4029                   DAC960_Progress("Background Initialization Suspended\n",
4030                                   Controller);
4031                   break;
4032                 case DAC960_V1_BackgroundInitializationCancelled:
4033                   DAC960_Progress("Background Initialization Cancelled\n",
4034                                   Controller);
4035                   break;
4036                 }
4037               memcpy(&Controller->V1.LastBackgroundInitializationStatus,
4038                      Controller->V1.BackgroundInitializationStatus,
4039                      sizeof(DAC960_V1_BackgroundInitializationStatus_T));
4040               break;
4041             case DAC960_V1_BackgroundInitSuccessful:
4042               if (Controller->V1.BackgroundInitializationStatus->Status ==
4043                   DAC960_V1_BackgroundInitializationInProgress)
4044                 DAC960_Progress("Background Initialization "
4045                                 "Completed Successfully\n", Controller);
4046               Controller->V1.BackgroundInitializationStatus->Status =
4047                 DAC960_V1_BackgroundInitializationInvalid;
4048               break;
4049             case DAC960_V1_BackgroundInitAborted:
4050               if (Controller->V1.BackgroundInitializationStatus->Status ==
4051                   DAC960_V1_BackgroundInitializationInProgress)
4052                 DAC960_Progress("Background Initialization Aborted\n",
4053                                 Controller);
4054               Controller->V1.BackgroundInitializationStatus->Status =
4055                 DAC960_V1_BackgroundInitializationInvalid;
4056               break;
4057             case DAC960_V1_NoBackgroundInitInProgress:
4058               break;
4059             }
4060         }
4061       else if (CommandOpcode == DAC960_V1_DCDB)
4062         {
4063            /*
4064              This is a bit ugly.
4065
4066              The InquiryStandardData and
4067              the InquiryUntitSerialNumber information
4068              retrieval operations BOTH use the DAC960_V1_DCDB
4069              commands.  the test above can't distinguish between
4070              these two cases.
4071
4072              Instead, we rely on the order of code later in this
4073              function to ensure that DeviceInquiryInformation commands
4074              are submitted before DeviceSerialNumber commands.
4075            */
4076            if (Controller->V1.NeedDeviceInquiryInformation)
4077              {
4078                 DAC960_SCSI_Inquiry_T *InquiryStandardData =
4079                         &Controller->V1.InquiryStandardData
4080                                 [Controller->V1.DeviceStateChannel]
4081                                 [Controller->V1.DeviceStateTargetID];
4082                 if (CommandStatus != DAC960_V1_NormalCompletion)
4083                    {
4084                         memset(InquiryStandardData, 0,
4085                                 sizeof(DAC960_SCSI_Inquiry_T));
4086                         InquiryStandardData->PeripheralDeviceType = 0x1F;
4087                     }
4088                  else
4089                         memcpy(InquiryStandardData,
4090                                 Controller->V1.NewInquiryStandardData,
4091                                 sizeof(DAC960_SCSI_Inquiry_T));
4092                  Controller->V1.NeedDeviceInquiryInformation = false;
4093               }
4094            else if (Controller->V1.NeedDeviceSerialNumberInformation)
4095               {
4096                 DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4097                   &Controller->V1.InquiryUnitSerialNumber
4098                                 [Controller->V1.DeviceStateChannel]
4099                                 [Controller->V1.DeviceStateTargetID];
4100                  if (CommandStatus != DAC960_V1_NormalCompletion)
4101                    {
4102                         memset(InquiryUnitSerialNumber, 0,
4103                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4104                         InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4105                     }
4106                   else
4107                         memcpy(InquiryUnitSerialNumber,
4108                                 Controller->V1.NewInquiryUnitSerialNumber,
4109                                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4110               Controller->V1.NeedDeviceSerialNumberInformation = false;
4111              }
4112         }
4113       /*
4114         Begin submitting new monitoring commands.
4115        */
4116       if (Controller->V1.NewEventLogSequenceNumber
4117           - Controller->V1.OldEventLogSequenceNumber > 0)
4118         {
4119           Command->V1.CommandMailbox.Type3E.CommandOpcode =
4120             DAC960_V1_PerformEventLogOperation;
4121           Command->V1.CommandMailbox.Type3E.OperationType =
4122             DAC960_V1_GetEventLogEntry;
4123           Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
4124           Command->V1.CommandMailbox.Type3E.SequenceNumber =
4125             Controller->V1.OldEventLogSequenceNumber;
4126           Command->V1.CommandMailbox.Type3E.BusAddress =
4127                 Controller->V1.EventLogEntryDMA;
4128           DAC960_QueueCommand(Command);
4129           return;
4130         }
4131       if (Controller->V1.NeedErrorTableInformation)
4132         {
4133           Controller->V1.NeedErrorTableInformation = false;
4134           Command->V1.CommandMailbox.Type3.CommandOpcode =
4135             DAC960_V1_GetErrorTable;
4136           Command->V1.CommandMailbox.Type3.BusAddress =
4137                 Controller->V1.NewErrorTableDMA;
4138           DAC960_QueueCommand(Command);
4139           return;
4140         }
4141       if (Controller->V1.NeedRebuildProgress &&
4142           Controller->V1.RebuildProgressFirst)
4143         {
4144           Controller->V1.NeedRebuildProgress = false;
4145           Command->V1.CommandMailbox.Type3.CommandOpcode =
4146             DAC960_V1_GetRebuildProgress;
4147           Command->V1.CommandMailbox.Type3.BusAddress =
4148             Controller->V1.RebuildProgressDMA;
4149           DAC960_QueueCommand(Command);
4150           return;
4151         }
4152       if (Controller->V1.NeedDeviceStateInformation)
4153         {
4154           if (Controller->V1.NeedDeviceInquiryInformation)
4155             {
4156               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4157               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4158
4159               dma_addr_t NewInquiryStandardDataDMA =
4160                 Controller->V1.NewInquiryStandardDataDMA;
4161
4162               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4163               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4164               DCDB->Channel = Controller->V1.DeviceStateChannel;
4165               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4166               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4167               DCDB->EarlyStatus = false;
4168               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4169               DCDB->NoAutomaticRequestSense = false;
4170               DCDB->DisconnectPermitted = true;
4171               DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
4172               DCDB->BusAddress = NewInquiryStandardDataDMA;
4173               DCDB->CDBLength = 6;
4174               DCDB->TransferLengthHigh4 = 0;
4175               DCDB->SenseLength = sizeof(DCDB->SenseData);
4176               DCDB->CDB[0] = 0x12; /* INQUIRY */
4177               DCDB->CDB[1] = 0; /* EVPD = 0 */
4178               DCDB->CDB[2] = 0; /* Page Code */
4179               DCDB->CDB[3] = 0; /* Reserved */
4180               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
4181               DCDB->CDB[5] = 0; /* Control */
4182               DAC960_QueueCommand(Command);
4183               return;
4184             }
4185           if (Controller->V1.NeedDeviceSerialNumberInformation)
4186             {
4187               DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
4188               dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
4189               dma_addr_t NewInquiryUnitSerialNumberDMA =
4190                         Controller->V1.NewInquiryUnitSerialNumberDMA;
4191
4192               Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
4193               Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
4194               DCDB->Channel = Controller->V1.DeviceStateChannel;
4195               DCDB->TargetID = Controller->V1.DeviceStateTargetID;
4196               DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
4197               DCDB->EarlyStatus = false;
4198               DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
4199               DCDB->NoAutomaticRequestSense = false;
4200               DCDB->DisconnectPermitted = true;
4201               DCDB->TransferLength =
4202                 sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4203               DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
4204               DCDB->CDBLength = 6;
4205               DCDB->TransferLengthHigh4 = 0;
4206               DCDB->SenseLength = sizeof(DCDB->SenseData);
4207               DCDB->CDB[0] = 0x12; /* INQUIRY */
4208               DCDB->CDB[1] = 1; /* EVPD = 1 */
4209               DCDB->CDB[2] = 0x80; /* Page Code */
4210               DCDB->CDB[3] = 0; /* Reserved */
4211               DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
4212               DCDB->CDB[5] = 0; /* Control */
4213               DAC960_QueueCommand(Command);
4214               return;
4215             }
4216           if (Controller->V1.StartDeviceStateScan)
4217             {
4218               Controller->V1.DeviceStateChannel = 0;
4219               Controller->V1.DeviceStateTargetID = 0;
4220               Controller->V1.StartDeviceStateScan = false;
4221             }
4222           else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
4223             {
4224               Controller->V1.DeviceStateChannel++;
4225               Controller->V1.DeviceStateTargetID = 0;
4226             }
4227           if (Controller->V1.DeviceStateChannel < Controller->Channels)
4228             {
4229               Controller->V1.NewDeviceState->DeviceState =
4230                 DAC960_V1_Device_Dead;
4231               Command->V1.CommandMailbox.Type3D.CommandOpcode =
4232                 DAC960_V1_GetDeviceState;
4233               Command->V1.CommandMailbox.Type3D.Channel =
4234                 Controller->V1.DeviceStateChannel;
4235               Command->V1.CommandMailbox.Type3D.TargetID =
4236                 Controller->V1.DeviceStateTargetID;
4237               Command->V1.CommandMailbox.Type3D.BusAddress =
4238                 Controller->V1.NewDeviceStateDMA;
4239               DAC960_QueueCommand(Command);
4240               return;
4241             }
4242           Controller->V1.NeedDeviceStateInformation = false;
4243         }
4244       if (Controller->V1.NeedLogicalDriveInformation)
4245         {
4246           Controller->V1.NeedLogicalDriveInformation = false;
4247           Command->V1.CommandMailbox.Type3.CommandOpcode =
4248             DAC960_V1_GetLogicalDriveInformation;
4249           Command->V1.CommandMailbox.Type3.BusAddress =
4250             Controller->V1.NewLogicalDriveInformationDMA;
4251           DAC960_QueueCommand(Command);
4252           return;
4253         }
4254       if (Controller->V1.NeedRebuildProgress)
4255         {
4256           Controller->V1.NeedRebuildProgress = false;
4257           Command->V1.CommandMailbox.Type3.CommandOpcode =
4258             DAC960_V1_GetRebuildProgress;
4259           Command->V1.CommandMailbox.Type3.BusAddress =
4260                 Controller->V1.RebuildProgressDMA;
4261           DAC960_QueueCommand(Command);
4262           return;
4263         }
4264       if (Controller->V1.NeedConsistencyCheckProgress)
4265         {
4266           Controller->V1.NeedConsistencyCheckProgress = false;
4267           Command->V1.CommandMailbox.Type3.CommandOpcode =
4268             DAC960_V1_RebuildStat;
4269           Command->V1.CommandMailbox.Type3.BusAddress =
4270             Controller->V1.RebuildProgressDMA;
4271           DAC960_QueueCommand(Command);
4272           return;
4273         }
4274       if (Controller->V1.NeedBackgroundInitializationStatus)
4275         {
4276           Controller->V1.NeedBackgroundInitializationStatus = false;
4277           Command->V1.CommandMailbox.Type3B.CommandOpcode =
4278             DAC960_V1_BackgroundInitializationControl;
4279           Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
4280           Command->V1.CommandMailbox.Type3B.BusAddress =
4281             Controller->V1.BackgroundInitializationStatusDMA;
4282           DAC960_QueueCommand(Command);
4283           return;
4284         }
4285       Controller->MonitoringTimerCount++;
4286       Controller->MonitoringTimer.expires =
4287         jiffies + DAC960_MonitoringTimerInterval;
4288         add_timer(&Controller->MonitoringTimer);
4289     }
4290   if (CommandType == DAC960_ImmediateCommand)
4291     {
4292       complete(Command->Completion);
4293       Command->Completion = NULL;
4294       return;
4295     }
4296   if (CommandType == DAC960_QueuedCommand)
4297     {
4298       DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
4299       KernelCommand->CommandStatus = Command->V1.CommandStatus;
4300       Command->V1.KernelCommand = NULL;
4301       if (CommandOpcode == DAC960_V1_DCDB)
4302         Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
4303                                           [KernelCommand->DCDB->TargetID] =
4304           false;
4305       DAC960_DeallocateCommand(Command);
4306       KernelCommand->CompletionFunction(KernelCommand);
4307       return;
4308     }
4309   /*
4310     Queue a Status Monitoring Command to the Controller using the just
4311     completed Command if one was deferred previously due to lack of a
4312     free Command when the Monitoring Timer Function was called.
4313   */
4314   if (Controller->MonitoringCommandDeferred)
4315     {
4316       Controller->MonitoringCommandDeferred = false;
4317       DAC960_V1_QueueMonitoringCommand(Command);
4318       return;
4319     }
4320   /*
4321     Deallocate the Command.
4322   */
4323   DAC960_DeallocateCommand(Command);
4324   /*
4325     Wake up any processes waiting on a free Command.
4326   */
4327   wake_up(&Controller->CommandWaitQueue);
4328 }
4329
4330
4331 /*
4332   DAC960_V2_ReadWriteError prints an appropriate error message for Command
4333   when an error occurs on a Read or Write operation.
4334 */
4335
4336 static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
4337 {
4338   DAC960_Controller_T *Controller = Command->Controller;
4339   unsigned char *SenseErrors[] = { "NO SENSE", "RECOVERED ERROR",
4340                                    "NOT READY", "MEDIUM ERROR",
4341                                    "HARDWARE ERROR", "ILLEGAL REQUEST",
4342                                    "UNIT ATTENTION", "DATA PROTECT",
4343                                    "BLANK CHECK", "VENDOR-SPECIFIC",
4344                                    "COPY ABORTED", "ABORTED COMMAND",
4345                                    "EQUAL", "VOLUME OVERFLOW",
4346                                    "MISCOMPARE", "RESERVED" };
4347   unsigned char *CommandName = "UNKNOWN";
4348   switch (Command->CommandType)
4349     {
4350     case DAC960_ReadCommand:
4351     case DAC960_ReadRetryCommand:
4352       CommandName = "READ";
4353       break;
4354     case DAC960_WriteCommand:
4355     case DAC960_WriteRetryCommand:
4356       CommandName = "WRITE";
4357       break;
4358     case DAC960_MonitoringCommand:
4359     case DAC960_ImmediateCommand:
4360     case DAC960_QueuedCommand:
4361       break;
4362     }
4363   DAC960_Error("Error Condition %s on %s:\n", Controller,
4364                SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
4365   DAC960_Error("  /dev/rd/c%dd%d:   absolute blocks %u..%u\n",
4366                Controller, Controller->ControllerNumber,
4367                Command->LogicalDriveNumber, Command->BlockNumber,
4368                Command->BlockNumber + Command->BlockCount - 1);
4369 }
4370
4371
4372 /*
4373   DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
4374   occurs.
4375 */
4376
4377 static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
4378                                   DAC960_V2_Event_T *Event)
4379 {
4380   DAC960_SCSI_RequestSense_T *RequestSense =
4381     (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
4382   unsigned char MessageBuffer[DAC960_LineBufferSize];
4383   static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
4384     { /* Physical Device Events (0x0000 - 0x007F) */
4385       { 0x0001, "P Online" },
4386       { 0x0002, "P Standby" },
4387       { 0x0005, "P Automatic Rebuild Started" },
4388       { 0x0006, "P Manual Rebuild Started" },
4389       { 0x0007, "P Rebuild Completed" },
4390       { 0x0008, "P Rebuild Cancelled" },
4391       { 0x0009, "P Rebuild Failed for Unknown Reasons" },
4392       { 0x000A, "P Rebuild Failed due to New Physical Device" },
4393       { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
4394       { 0x000C, "S Offline" },
4395       { 0x000D, "P Found" },
4396       { 0x000E, "P Removed" },
4397       { 0x000F, "P Unconfigured" },
4398       { 0x0010, "P Expand Capacity Started" },
4399       { 0x0011, "P Expand Capacity Completed" },
4400       { 0x0012, "P Expand Capacity Failed" },
4401       { 0x0013, "P Command Timed Out" },
4402       { 0x0014, "P Command Aborted" },
4403       { 0x0015, "P Command Retried" },
4404       { 0x0016, "P Parity Error" },
4405       { 0x0017, "P Soft Error" },
4406       { 0x0018, "P Miscellaneous Error" },
4407       { 0x0019, "P Reset" },
4408       { 0x001A, "P Active Spare Found" },
4409       { 0x001B, "P Warm Spare Found" },
4410       { 0x001C, "S Sense Data Received" },
4411       { 0x001D, "P Initialization Started" },
4412       { 0x001E, "P Initialization Completed" },
4413       { 0x001F, "P Initialization Failed" },
4414       { 0x0020, "P Initialization Cancelled" },
4415       { 0x0021, "P Failed because Write Recovery Failed" },
4416       { 0x0022, "P Failed because SCSI Bus Reset Failed" },
4417       { 0x0023, "P Failed because of Double Check Condition" },
4418       { 0x0024, "P Failed because Device Cannot Be Accessed" },
4419       { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
4420       { 0x0026, "P Failed because of Bad Tag from Device" },
4421       { 0x0027, "P Failed because of Command Timeout" },
4422       { 0x0028, "P Failed because of System Reset" },
4423       { 0x0029, "P Failed because of Busy Status or Parity Error" },
4424       { 0x002A, "P Failed because Host Set Device to Failed State" },
4425       { 0x002B, "P Failed because of Selection Timeout" },
4426       { 0x002C, "P Failed because of SCSI Bus Phase Error" },
4427       { 0x002D, "P Failed because Device Returned Unknown Status" },
4428       { 0x002E, "P Failed because Device Not Ready" },
4429       { 0x002F, "P Failed because Device Not Found at Startup" },
4430       { 0x0030, "P Failed because COD Write Operation Failed" },
4431       { 0x0031, "P Failed because BDT Write Operation Failed" },
4432       { 0x0039, "P Missing at Startup" },
4433       { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
4434       { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
4435       { 0x003D, "P Standby Rebuild Started" },
4436       /* Logical Device Events (0x0080 - 0x00FF) */
4437       { 0x0080, "M Consistency Check Started" },
4438       { 0x0081, "M Consistency Check Completed" },
4439       { 0x0082, "M Consistency Check Cancelled" },
4440       { 0x0083, "M Consistency Check Completed With Errors" },
4441       { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
4442       { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
4443       { 0x0086, "L Offline" },
4444       { 0x0087, "L Critical" },
4445       { 0x0088, "L Online" },
4446       { 0x0089, "M Automatic Rebuild Started" },
4447       { 0x008A, "M Manual Rebuild Started" },
4448       { 0x008B, "M Rebuild Completed" },
4449       { 0x008C, "M Rebuild Cancelled" },
4450       { 0x008D, "M Rebuild Failed for Unknown Reasons" },
4451       { 0x008E, "M Rebuild Failed due to New Physical Device" },
4452       { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
4453       { 0x0090, "M Initialization Started" },
4454       { 0x0091, "M Initialization Completed" },
4455       { 0x0092, "M Initialization Cancelled" },
4456       { 0x0093, "M Initialization Failed" },
4457       { 0x0094, "L Found" },
4458       { 0x0095, "L Deleted" },
4459       { 0x0096, "M Expand Capacity Started" },
4460       { 0x0097, "M Expand Capacity Completed" },
4461       { 0x0098, "M Expand Capacity Failed" },
4462       { 0x0099, "L Bad Block Found" },
4463       { 0x009A, "L Size Changed" },
4464       { 0x009B, "L Type Changed" },
4465       { 0x009C, "L Bad Data Block Found" },
4466       { 0x009E, "L Read of Data Block in BDT" },
4467       { 0x009F, "L Write Back Data for Disk Block Lost" },
4468       { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
4469       { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
4470       { 0x00A2, "L Standby Rebuild Started" },
4471       /* Fault Management Events (0x0100 - 0x017F) */
4472       { 0x0140, "E Fan %d Failed" },
4473       { 0x0141, "E Fan %d OK" },
4474       { 0x0142, "E Fan %d Not Present" },
4475       { 0x0143, "E Power Supply %d Failed" },
4476       { 0x0144, "E Power Supply %d OK" },
4477       { 0x0145, "E Power Supply %d Not Present" },
4478       { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
4479       { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
4480       { 0x0148, "E Temperature Sensor %d Temperature Normal" },
4481       { 0x0149, "E Temperature Sensor %d Not Present" },
4482       { 0x014A, "E Enclosure Management Unit %d Access Critical" },
4483       { 0x014B, "E Enclosure Management Unit %d Access OK" },
4484       { 0x014C, "E Enclosure Management Unit %d Access Offline" },
4485       /* Controller Events (0x0180 - 0x01FF) */
4486       { 0x0181, "C Cache Write Back Error" },
4487       { 0x0188, "C Battery Backup Unit Found" },
4488       { 0x0189, "C Battery Backup Unit Charge Level Low" },
4489       { 0x018A, "C Battery Backup Unit Charge Level OK" },
4490       { 0x0193, "C Installation Aborted" },
4491       { 0x0195, "C Battery Backup Unit Physically Removed" },
4492       { 0x0196, "C Memory Error During Warm Boot" },
4493       { 0x019E, "C Memory Soft ECC Error Corrected" },
4494       { 0x019F, "C Memory Hard ECC Error Corrected" },
4495       { 0x01A2, "C Battery Backup Unit Failed" },
4496       { 0x01AB, "C Mirror Race Recovery Failed" },
4497       { 0x01AC, "C Mirror Race on Critical Drive" },
4498       /* Controller Internal Processor Events */
4499       { 0x0380, "C Internal Controller Hung" },
4500       { 0x0381, "C Internal Controller Firmware Breakpoint" },
4501       { 0x0390, "C Internal Controller i960 Processor Specific Error" },
4502       { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
4503       { 0, "" } };
4504   int EventListIndex = 0, EventCode;
4505   unsigned char EventType, *EventMessage;
4506   if (Event->EventCode == 0x1C &&
4507       RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
4508       (RequestSense->AdditionalSenseCode == 0x80 ||
4509        RequestSense->AdditionalSenseCode == 0x81))
4510     Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
4511                        RequestSense->AdditionalSenseCodeQualifier;
4512   while (true)
4513     {
4514       EventCode = EventList[EventListIndex].EventCode;
4515       if (EventCode == Event->EventCode || EventCode == 0) break;
4516       EventListIndex++;
4517     }
4518   EventType = EventList[EventListIndex].EventMessage[0];
4519   EventMessage = &EventList[EventListIndex].EventMessage[2];
4520   if (EventCode == 0)
4521     {
4522       DAC960_Critical("Unknown Controller Event Code %04X\n",
4523                       Controller, Event->EventCode);
4524       return;
4525     }
4526   switch (EventType)
4527     {
4528     case 'P':
4529       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4530                       Event->Channel, Event->TargetID, EventMessage);
4531       break;
4532     case 'L':
4533       DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4534                       Event->LogicalUnit, Controller->ControllerNumber,
4535                       Event->LogicalUnit, EventMessage);
4536       break;
4537     case 'M':
4538       DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
4539                       Event->LogicalUnit, Controller->ControllerNumber,
4540                       Event->LogicalUnit, EventMessage);
4541       break;
4542     case 'S':
4543       if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
4544           (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
4545            RequestSense->AdditionalSenseCode == 0x04 &&
4546            (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
4547             RequestSense->AdditionalSenseCodeQualifier == 0x02)))
4548         break;
4549       DAC960_Critical("Physical Device %d:%d %s\n", Controller,
4550                       Event->Channel, Event->TargetID, EventMessage);
4551       DAC960_Critical("Physical Device %d:%d Request Sense: "
4552                       "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
4553                       Controller,
4554                       Event->Channel,
4555                       Event->TargetID,
4556                       RequestSense->SenseKey,
4557                       RequestSense->AdditionalSenseCode,
4558                       RequestSense->AdditionalSenseCodeQualifier);
4559       DAC960_Critical("Physical Device %d:%d Request Sense: "
4560                       "Information = %02X%02X%02X%02X "
4561                       "%02X%02X%02X%02X\n",
4562                       Controller,
4563                       Event->Channel,
4564                       Event->TargetID,
4565                       RequestSense->Information[0],
4566                       RequestSense->Information[1],
4567                       RequestSense->Information[2],
4568                       RequestSense->Information[3],
4569                       RequestSense->CommandSpecificInformation[0],
4570                       RequestSense->CommandSpecificInformation[1],
4571                       RequestSense->CommandSpecificInformation[2],
4572                       RequestSense->CommandSpecificInformation[3]);
4573       break;
4574     case 'E':
4575       if (Controller->SuppressEnclosureMessages) break;
4576       sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
4577       DAC960_Critical("Enclosure %d %s\n", Controller,
4578                       Event->TargetID, MessageBuffer);
4579       break;
4580     case 'C':
4581       DAC960_Critical("Controller %s\n", Controller, EventMessage);
4582       break;
4583     default:
4584       DAC960_Critical("Unknown Controller Event Code %04X\n",
4585                       Controller, Event->EventCode);
4586       break;
4587     }
4588 }
4589
4590
4591 /*
4592   DAC960_V2_ReportProgress prints an appropriate progress message for
4593   Logical Device Long Operations.
4594 */
4595
4596 static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
4597                                      unsigned char *MessageString,
4598                                      unsigned int LogicalDeviceNumber,
4599                                      unsigned long BlocksCompleted,
4600                                      unsigned long LogicalDeviceSize)
4601 {
4602   Controller->EphemeralProgressMessage = true;
4603   DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
4604                   "%d%% completed\n", Controller,
4605                   MessageString,
4606                   LogicalDeviceNumber,
4607                   Controller->ControllerNumber,
4608                   LogicalDeviceNumber,
4609                   (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
4610   Controller->EphemeralProgressMessage = false;
4611 }
4612
4613
4614 /*
4615   DAC960_V2_ProcessCompletedCommand performs completion processing for Command
4616   for DAC960 V2 Firmware Controllers.
4617 */
4618
4619 static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
4620 {
4621   DAC960_Controller_T *Controller = Command->Controller;
4622   DAC960_CommandType_T CommandType = Command->CommandType;
4623   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
4624   DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
4625   DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
4626
4627   if (CommandType == DAC960_ReadCommand ||
4628       CommandType == DAC960_WriteCommand)
4629     {
4630
4631 #ifdef FORCE_RETRY_DEBUG
4632       CommandStatus = DAC960_V2_AbormalCompletion;
4633 #endif
4634       Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
4635
4636       if (CommandStatus == DAC960_V2_NormalCompletion) {
4637
4638                 if (!DAC960_ProcessCompletedRequest(Command, true))
4639                         BUG();
4640
4641       } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
4642         {
4643           /*
4644            * break the command down into pieces and resubmit each
4645            * piece, hoping that some of them will succeed.
4646            */
4647            DAC960_queue_partial_rw(Command);
4648            return;
4649         }
4650       else
4651         {
4652           if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4653             DAC960_V2_ReadWriteError(Command);
4654           /*
4655             Perform completion processing for all buffers in this I/O Request.
4656           */
4657           (void)DAC960_ProcessCompletedRequest(Command, false);
4658         }
4659     }
4660   else if (CommandType == DAC960_ReadRetryCommand ||
4661            CommandType == DAC960_WriteRetryCommand)
4662     {
4663       bool normal_completion;
4664
4665 #ifdef FORCE_RETRY_FAILURE_DEBUG
4666       static int retry_count = 1;
4667 #endif
4668       /*
4669         Perform completion processing for the portion that was
4670         retried, and submit the next portion, if any.
4671       */
4672       normal_completion = true;
4673       if (CommandStatus != DAC960_V2_NormalCompletion) {
4674         normal_completion = false;
4675         if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
4676             DAC960_V2_ReadWriteError(Command);
4677       }
4678
4679 #ifdef FORCE_RETRY_FAILURE_DEBUG
4680       if (!(++retry_count % 10000)) {
4681               printk("V2 error retry failure test\n");
4682               normal_completion = false;
4683               DAC960_V2_ReadWriteError(Command);
4684       }
4685 #endif
4686
4687       if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
4688                 DAC960_queue_partial_rw(Command);
4689                 return;
4690       }
4691     }
4692   else if (CommandType == DAC960_MonitoringCommand)
4693     {
4694       if (Controller->ShutdownMonitoringTimer)
4695               return;
4696       if (CommandOpcode == DAC960_V2_GetControllerInfo)
4697         {
4698           DAC960_V2_ControllerInfo_T *NewControllerInfo =
4699             Controller->V2.NewControllerInformation;
4700           DAC960_V2_ControllerInfo_T *ControllerInfo =
4701             &Controller->V2.ControllerInformation;
4702           Controller->LogicalDriveCount =
4703             NewControllerInfo->LogicalDevicesPresent;
4704           Controller->V2.NeedLogicalDeviceInformation = true;
4705           Controller->V2.NeedPhysicalDeviceInformation = true;
4706           Controller->V2.StartLogicalDeviceInformationScan = true;
4707           Controller->V2.StartPhysicalDeviceInformationScan = true;
4708           Controller->MonitoringAlertMode =
4709             (NewControllerInfo->LogicalDevicesCritical > 0 ||
4710              NewControllerInfo->LogicalDevicesOffline > 0 ||
4711              NewControllerInfo->PhysicalDisksCritical > 0 ||
4712              NewControllerInfo->PhysicalDisksOffline > 0);
4713           memcpy(ControllerInfo, NewControllerInfo,
4714                  sizeof(DAC960_V2_ControllerInfo_T));
4715         }
4716       else if (CommandOpcode == DAC960_V2_GetEvent)
4717         {
4718           if (CommandStatus == DAC960_V2_NormalCompletion) {
4719             DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
4720           }
4721           Controller->V2.NextEventSequenceNumber++;
4722         }
4723       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
4724                CommandStatus == DAC960_V2_NormalCompletion)
4725         {
4726           DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
4727             Controller->V2.NewPhysicalDeviceInformation;
4728           unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
4729           DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4730             Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4731           DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4732             Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4733           unsigned int DeviceIndex;
4734           while (PhysicalDeviceInfo != NULL &&
4735                  (NewPhysicalDeviceInfo->Channel >
4736                   PhysicalDeviceInfo->Channel ||
4737                   (NewPhysicalDeviceInfo->Channel ==
4738                    PhysicalDeviceInfo->Channel &&
4739                    (NewPhysicalDeviceInfo->TargetID >
4740                     PhysicalDeviceInfo->TargetID ||
4741                    (NewPhysicalDeviceInfo->TargetID ==
4742                     PhysicalDeviceInfo->TargetID &&
4743                     NewPhysicalDeviceInfo->LogicalUnit >
4744                     PhysicalDeviceInfo->LogicalUnit)))))
4745             {
4746               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4747                               Controller,
4748                               PhysicalDeviceInfo->Channel,
4749                               PhysicalDeviceInfo->TargetID);
4750               Controller->V2.PhysicalDeviceInformation
4751                              [PhysicalDeviceIndex] = NULL;
4752               Controller->V2.InquiryUnitSerialNumber
4753                              [PhysicalDeviceIndex] = NULL;
4754               kfree(PhysicalDeviceInfo);
4755               kfree(InquiryUnitSerialNumber);
4756               for (DeviceIndex = PhysicalDeviceIndex;
4757                    DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
4758                    DeviceIndex++)
4759                 {
4760                   Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4761                     Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
4762                   Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4763                     Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
4764                 }
4765               Controller->V2.PhysicalDeviceInformation
4766                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4767               Controller->V2.InquiryUnitSerialNumber
4768                              [DAC960_V2_MaxPhysicalDevices-1] = NULL;
4769               PhysicalDeviceInfo =
4770                 Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
4771               InquiryUnitSerialNumber =
4772                 Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
4773             }
4774           if (PhysicalDeviceInfo == NULL ||
4775               (NewPhysicalDeviceInfo->Channel !=
4776                PhysicalDeviceInfo->Channel) ||
4777               (NewPhysicalDeviceInfo->TargetID !=
4778                PhysicalDeviceInfo->TargetID) ||
4779               (NewPhysicalDeviceInfo->LogicalUnit !=
4780                PhysicalDeviceInfo->LogicalUnit))
4781             {
4782               PhysicalDeviceInfo =
4783                 kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
4784               InquiryUnitSerialNumber =
4785                   kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
4786                           GFP_ATOMIC);
4787               if (InquiryUnitSerialNumber == NULL ||
4788                   PhysicalDeviceInfo == NULL)
4789                 {
4790                   kfree(InquiryUnitSerialNumber);
4791                   InquiryUnitSerialNumber = NULL;
4792                   kfree(PhysicalDeviceInfo);
4793                   PhysicalDeviceInfo = NULL;
4794                 }
4795               DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
4796                               Controller,
4797                               NewPhysicalDeviceInfo->Channel,
4798                               NewPhysicalDeviceInfo->TargetID,
4799                               (PhysicalDeviceInfo != NULL
4800                                ? "" : " - Allocation Failed"));
4801               if (PhysicalDeviceInfo != NULL)
4802                 {
4803                   memset(PhysicalDeviceInfo, 0,
4804                          sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4805                   PhysicalDeviceInfo->PhysicalDeviceState =
4806                     DAC960_V2_Device_InvalidState;
4807                   memset(InquiryUnitSerialNumber, 0,
4808                          sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
4809                   InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
4810                   for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
4811                        DeviceIndex > PhysicalDeviceIndex;
4812                        DeviceIndex--)
4813                     {
4814                       Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
4815                         Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
4816                       Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
4817                         Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
4818                     }
4819                   Controller->V2.PhysicalDeviceInformation
4820                                  [PhysicalDeviceIndex] =
4821                     PhysicalDeviceInfo;
4822                   Controller->V2.InquiryUnitSerialNumber
4823                                  [PhysicalDeviceIndex] =
4824                     InquiryUnitSerialNumber;
4825                   Controller->V2.NeedDeviceSerialNumberInformation = true;
4826                 }
4827             }
4828           if (PhysicalDeviceInfo != NULL)
4829             {
4830               if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
4831                   PhysicalDeviceInfo->PhysicalDeviceState)
4832                 DAC960_Critical(
4833                   "Physical Device %d:%d is now %s\n", Controller,
4834                   NewPhysicalDeviceInfo->Channel,
4835                   NewPhysicalDeviceInfo->TargetID,
4836                   (NewPhysicalDeviceInfo->PhysicalDeviceState
4837                    == DAC960_V2_Device_Online
4838                    ? "ONLINE"
4839                    : NewPhysicalDeviceInfo->PhysicalDeviceState
4840                      == DAC960_V2_Device_Rebuild
4841                      ? "REBUILD"
4842                      : NewPhysicalDeviceInfo->PhysicalDeviceState
4843                        == DAC960_V2_Device_Missing
4844                        ? "MISSING"
4845                        : NewPhysicalDeviceInfo->PhysicalDeviceState
4846                          == DAC960_V2_Device_Critical
4847                          ? "CRITICAL"
4848                          : NewPhysicalDeviceInfo->PhysicalDeviceState
4849                            == DAC960_V2_Device_Dead
4850                            ? "DEAD"
4851                            : NewPhysicalDeviceInfo->PhysicalDeviceState
4852                              == DAC960_V2_Device_SuspectedDead
4853                              ? "SUSPECTED-DEAD"
4854                              : NewPhysicalDeviceInfo->PhysicalDeviceState
4855                                == DAC960_V2_Device_CommandedOffline
4856                                ? "COMMANDED-OFFLINE"
4857                                : NewPhysicalDeviceInfo->PhysicalDeviceState
4858                                  == DAC960_V2_Device_Standby
4859                                  ? "STANDBY" : "UNKNOWN"));
4860               if ((NewPhysicalDeviceInfo->ParityErrors !=
4861                    PhysicalDeviceInfo->ParityErrors) ||
4862                   (NewPhysicalDeviceInfo->SoftErrors !=
4863                    PhysicalDeviceInfo->SoftErrors) ||
4864                   (NewPhysicalDeviceInfo->HardErrors !=
4865                    PhysicalDeviceInfo->HardErrors) ||
4866                   (NewPhysicalDeviceInfo->MiscellaneousErrors !=
4867                    PhysicalDeviceInfo->MiscellaneousErrors) ||
4868                   (NewPhysicalDeviceInfo->CommandTimeouts !=
4869                    PhysicalDeviceInfo->CommandTimeouts) ||
4870                   (NewPhysicalDeviceInfo->Retries !=
4871                    PhysicalDeviceInfo->Retries) ||
4872                   (NewPhysicalDeviceInfo->Aborts !=
4873                    PhysicalDeviceInfo->Aborts) ||
4874                   (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
4875                    PhysicalDeviceInfo->PredictedFailuresDetected))
4876                 {
4877                   DAC960_Critical("Physical Device %d:%d Errors: "
4878                                   "Parity = %d, Soft = %d, "
4879                                   "Hard = %d, Misc = %d\n",
4880                                   Controller,
4881                                   NewPhysicalDeviceInfo->Channel,
4882                                   NewPhysicalDeviceInfo->TargetID,
4883                                   NewPhysicalDeviceInfo->ParityErrors,
4884                                   NewPhysicalDeviceInfo->SoftErrors,
4885                                   NewPhysicalDeviceInfo->HardErrors,
4886                                   NewPhysicalDeviceInfo->MiscellaneousErrors);
4887                   DAC960_Critical("Physical Device %d:%d Errors: "
4888                                   "Timeouts = %d, Retries = %d, "
4889                                   "Aborts = %d, Predicted = %d\n",
4890                                   Controller,
4891                                   NewPhysicalDeviceInfo->Channel,
4892                                   NewPhysicalDeviceInfo->TargetID,
4893                                   NewPhysicalDeviceInfo->CommandTimeouts,
4894                                   NewPhysicalDeviceInfo->Retries,
4895                                   NewPhysicalDeviceInfo->Aborts,
4896                                   NewPhysicalDeviceInfo
4897                                   ->PredictedFailuresDetected);
4898                 }
4899               if ((PhysicalDeviceInfo->PhysicalDeviceState
4900                    == DAC960_V2_Device_Dead ||
4901                    PhysicalDeviceInfo->PhysicalDeviceState
4902                    == DAC960_V2_Device_InvalidState) &&
4903                   NewPhysicalDeviceInfo->PhysicalDeviceState
4904                   != DAC960_V2_Device_Dead)
4905                 Controller->V2.NeedDeviceSerialNumberInformation = true;
4906               memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
4907                      sizeof(DAC960_V2_PhysicalDeviceInfo_T));
4908             }
4909           NewPhysicalDeviceInfo->LogicalUnit++;
4910           Controller->V2.PhysicalDeviceIndex++;
4911         }
4912       else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
4913         {
4914           unsigned int DeviceIndex;
4915           for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
4916                DeviceIndex < DAC960_V2_MaxPhysicalDevices;
4917                DeviceIndex++)
4918             {
4919               DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
4920                 Controller->V2.PhysicalDeviceInformation[DeviceIndex];
4921               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
4922                 Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
4923               if (PhysicalDeviceInfo == NULL) break;
4924               DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
4925                               Controller,
4926                               PhysicalDeviceInfo->Channel,
4927                               PhysicalDeviceInfo->TargetID);
4928               Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
4929               Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
4930               kfree(PhysicalDeviceInfo);
4931               kfree(InquiryUnitSerialNumber);
4932             }
4933           Controller->V2.NeedPhysicalDeviceInformation = false;
4934         }
4935       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
4936                CommandStatus == DAC960_V2_NormalCompletion)
4937         {
4938           DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
4939             Controller->V2.NewLogicalDeviceInformation;
4940           unsigned short LogicalDeviceNumber =
4941             NewLogicalDeviceInfo->LogicalDeviceNumber;
4942           DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
4943             Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
4944           if (LogicalDeviceInfo == NULL)
4945             {
4946               DAC960_V2_PhysicalDevice_T PhysicalDevice;
4947               PhysicalDevice.Controller = 0;
4948               PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
4949               PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
4950               PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
4951               Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
4952                 PhysicalDevice;
4953               LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
4954                                           GFP_ATOMIC);
4955               Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
4956                 LogicalDeviceInfo;
4957               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4958                               "Now Exists%s\n", Controller,
4959                               LogicalDeviceNumber,
4960                               Controller->ControllerNumber,
4961                               LogicalDeviceNumber,
4962                               (LogicalDeviceInfo != NULL
4963                                ? "" : " - Allocation Failed"));
4964               if (LogicalDeviceInfo != NULL)
4965                 {
4966                   memset(LogicalDeviceInfo, 0,
4967                          sizeof(DAC960_V2_LogicalDeviceInfo_T));
4968                   DAC960_ComputeGenericDiskInfo(Controller);
4969                 }
4970             }
4971           if (LogicalDeviceInfo != NULL)
4972             {
4973               unsigned long LogicalDeviceSize =
4974                 NewLogicalDeviceInfo->ConfigurableDeviceSize;
4975               if (NewLogicalDeviceInfo->LogicalDeviceState !=
4976                   LogicalDeviceInfo->LogicalDeviceState)
4977                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
4978                                 "is now %s\n", Controller,
4979                                 LogicalDeviceNumber,
4980                                 Controller->ControllerNumber,
4981                                 LogicalDeviceNumber,
4982                                 (NewLogicalDeviceInfo->LogicalDeviceState
4983                                  == DAC960_V2_LogicalDevice_Online
4984                                  ? "ONLINE"
4985                                  : NewLogicalDeviceInfo->LogicalDeviceState
4986                                    == DAC960_V2_LogicalDevice_Critical
4987                                    ? "CRITICAL" : "OFFLINE"));
4988               if ((NewLogicalDeviceInfo->SoftErrors !=
4989                    LogicalDeviceInfo->SoftErrors) ||
4990                   (NewLogicalDeviceInfo->CommandsFailed !=
4991                    LogicalDeviceInfo->CommandsFailed) ||
4992                   (NewLogicalDeviceInfo->DeferredWriteErrors !=
4993                    LogicalDeviceInfo->DeferredWriteErrors))
4994                 DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
4995                                 "Soft = %d, Failed = %d, Deferred Write = %d\n",
4996                                 Controller, LogicalDeviceNumber,
4997                                 Controller->ControllerNumber,
4998                                 LogicalDeviceNumber,
4999                                 NewLogicalDeviceInfo->SoftErrors,
5000                                 NewLogicalDeviceInfo->CommandsFailed,
5001                                 NewLogicalDeviceInfo->DeferredWriteErrors);
5002               if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
5003                 DAC960_V2_ReportProgress(Controller,
5004                                          "Consistency Check",
5005                                          LogicalDeviceNumber,
5006                                          NewLogicalDeviceInfo
5007                                          ->ConsistencyCheckBlockNumber,
5008                                          LogicalDeviceSize);
5009               else if (NewLogicalDeviceInfo->RebuildInProgress)
5010                 DAC960_V2_ReportProgress(Controller,
5011                                          "Rebuild",
5012                                          LogicalDeviceNumber,
5013                                          NewLogicalDeviceInfo
5014                                          ->RebuildBlockNumber,
5015                                          LogicalDeviceSize);
5016               else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5017                 DAC960_V2_ReportProgress(Controller,
5018                                          "Background Initialization",
5019                                          LogicalDeviceNumber,
5020                                          NewLogicalDeviceInfo
5021                                          ->BackgroundInitializationBlockNumber,
5022                                          LogicalDeviceSize);
5023               else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
5024                 DAC960_V2_ReportProgress(Controller,
5025                                          "Foreground Initialization",
5026                                          LogicalDeviceNumber,
5027                                          NewLogicalDeviceInfo
5028                                          ->ForegroundInitializationBlockNumber,
5029                                          LogicalDeviceSize);
5030               else if (NewLogicalDeviceInfo->DataMigrationInProgress)
5031                 DAC960_V2_ReportProgress(Controller,
5032                                          "Data Migration",
5033                                          LogicalDeviceNumber,
5034                                          NewLogicalDeviceInfo
5035                                          ->DataMigrationBlockNumber,
5036                                          LogicalDeviceSize);
5037               else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
5038                 DAC960_V2_ReportProgress(Controller,
5039                                          "Patrol Operation",
5040                                          LogicalDeviceNumber,
5041                                          NewLogicalDeviceInfo
5042                                          ->PatrolOperationBlockNumber,
5043                                          LogicalDeviceSize);
5044               if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
5045                   !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
5046                 DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
5047                                 "Background Initialization %s\n",
5048                                 Controller,
5049                                 LogicalDeviceNumber,
5050                                 Controller->ControllerNumber,
5051                                 LogicalDeviceNumber,
5052                                 (NewLogicalDeviceInfo->LogicalDeviceControl
5053                                                       .LogicalDeviceInitialized
5054                                  ? "Completed" : "Failed"));
5055               memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
5056                      sizeof(DAC960_V2_LogicalDeviceInfo_T));
5057             }
5058           Controller->V2.LogicalDriveFoundDuringScan
5059                          [LogicalDeviceNumber] = true;
5060           NewLogicalDeviceInfo->LogicalDeviceNumber++;
5061         }
5062       else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
5063         {
5064           int LogicalDriveNumber;
5065           for (LogicalDriveNumber = 0;
5066                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5067                LogicalDriveNumber++)
5068             {
5069               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5070                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5071               if (LogicalDeviceInfo == NULL ||
5072                   Controller->V2.LogicalDriveFoundDuringScan
5073                                  [LogicalDriveNumber])
5074                 continue;
5075               DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
5076                               "No Longer Exists\n", Controller,
5077                               LogicalDriveNumber,
5078                               Controller->ControllerNumber,
5079                               LogicalDriveNumber);
5080               Controller->V2.LogicalDeviceInformation
5081                              [LogicalDriveNumber] = NULL;
5082               kfree(LogicalDeviceInfo);
5083               Controller->LogicalDriveInitiallyAccessible
5084                           [LogicalDriveNumber] = false;
5085               DAC960_ComputeGenericDiskInfo(Controller);
5086             }
5087           Controller->V2.NeedLogicalDeviceInformation = false;
5088         }
5089       else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
5090         {
5091             DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5092                 Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
5093
5094             if (CommandStatus != DAC960_V2_NormalCompletion) {
5095                 memset(InquiryUnitSerialNumber,
5096                         0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5097                 InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5098             } else
5099                 memcpy(InquiryUnitSerialNumber,
5100                         Controller->V2.NewInquiryUnitSerialNumber,
5101                         sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
5102
5103              Controller->V2.NeedDeviceSerialNumberInformation = false;
5104         }
5105
5106       if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5107           - Controller->V2.NextEventSequenceNumber > 0)
5108         {
5109           CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
5110           CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
5111           CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
5112             Controller->V2.NextEventSequenceNumber >> 16;
5113           CommandMailbox->GetEvent.ControllerNumber = 0;
5114           CommandMailbox->GetEvent.IOCTL_Opcode =
5115             DAC960_V2_GetEvent;
5116           CommandMailbox->GetEvent.EventSequenceNumberLow16 =
5117             Controller->V2.NextEventSequenceNumber & 0xFFFF;
5118           CommandMailbox->GetEvent.DataTransferMemoryAddress
5119                                   .ScatterGatherSegments[0]
5120                                   .SegmentDataPointer =
5121             Controller->V2.EventDMA;
5122           CommandMailbox->GetEvent.DataTransferMemoryAddress
5123                                   .ScatterGatherSegments[0]
5124                                   .SegmentByteCount =
5125             CommandMailbox->GetEvent.DataTransferSize;
5126           DAC960_QueueCommand(Command);
5127           return;
5128         }
5129       if (Controller->V2.NeedPhysicalDeviceInformation)
5130         {
5131           if (Controller->V2.NeedDeviceSerialNumberInformation)
5132             {
5133               DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
5134                 Controller->V2.NewInquiryUnitSerialNumber;
5135               InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
5136
5137               DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
5138                         Controller->V2.NewPhysicalDeviceInformation->Channel,
5139                         Controller->V2.NewPhysicalDeviceInformation->TargetID,
5140                 Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
5141
5142
5143               DAC960_QueueCommand(Command);
5144               return;
5145             }
5146           if (Controller->V2.StartPhysicalDeviceInformationScan)
5147             {
5148               Controller->V2.PhysicalDeviceIndex = 0;
5149               Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
5150               Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
5151               Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
5152               Controller->V2.StartPhysicalDeviceInformationScan = false;
5153             }
5154           CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5155           CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
5156             sizeof(DAC960_V2_PhysicalDeviceInfo_T);
5157           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
5158             Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
5159           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
5160             Controller->V2.NewPhysicalDeviceInformation->TargetID;
5161           CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
5162             Controller->V2.NewPhysicalDeviceInformation->Channel;
5163           CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
5164             DAC960_V2_GetPhysicalDeviceInfoValid;
5165           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5166                                             .ScatterGatherSegments[0]
5167                                             .SegmentDataPointer =
5168             Controller->V2.NewPhysicalDeviceInformationDMA;
5169           CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
5170                                             .ScatterGatherSegments[0]
5171                                             .SegmentByteCount =
5172             CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
5173           DAC960_QueueCommand(Command);
5174           return;
5175         }
5176       if (Controller->V2.NeedLogicalDeviceInformation)
5177         {
5178           if (Controller->V2.StartLogicalDeviceInformationScan)
5179             {
5180               int LogicalDriveNumber;
5181               for (LogicalDriveNumber = 0;
5182                    LogicalDriveNumber < DAC960_MaxLogicalDrives;
5183                    LogicalDriveNumber++)
5184                 Controller->V2.LogicalDriveFoundDuringScan
5185                                [LogicalDriveNumber] = false;
5186               Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
5187               Controller->V2.StartLogicalDeviceInformationScan = false;
5188             }
5189           CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
5190           CommandMailbox->LogicalDeviceInfo.DataTransferSize =
5191             sizeof(DAC960_V2_LogicalDeviceInfo_T);
5192           CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
5193             Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
5194           CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
5195             DAC960_V2_GetLogicalDeviceInfoValid;
5196           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5197                                            .ScatterGatherSegments[0]
5198                                            .SegmentDataPointer =
5199             Controller->V2.NewLogicalDeviceInformationDMA;
5200           CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
5201                                            .ScatterGatherSegments[0]
5202                                            .SegmentByteCount =
5203             CommandMailbox->LogicalDeviceInfo.DataTransferSize;
5204           DAC960_QueueCommand(Command);
5205           return;
5206         }
5207       Controller->MonitoringTimerCount++;
5208       Controller->MonitoringTimer.expires =
5209         jiffies + DAC960_HealthStatusMonitoringInterval;
5210         add_timer(&Controller->MonitoringTimer);
5211     }
5212   if (CommandType == DAC960_ImmediateCommand)
5213     {
5214       complete(Command->Completion);
5215       Command->Completion = NULL;
5216       return;
5217     }
5218   if (CommandType == DAC960_QueuedCommand)
5219     {
5220       DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
5221       KernelCommand->CommandStatus = CommandStatus;
5222       KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
5223       KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
5224       Command->V2.KernelCommand = NULL;
5225       DAC960_DeallocateCommand(Command);
5226       KernelCommand->CompletionFunction(KernelCommand);
5227       return;
5228     }
5229   /*
5230     Queue a Status Monitoring Command to the Controller using the just
5231     completed Command if one was deferred previously due to lack of a
5232     free Command when the Monitoring Timer Function was called.
5233   */
5234   if (Controller->MonitoringCommandDeferred)
5235     {
5236       Controller->MonitoringCommandDeferred = false;
5237       DAC960_V2_QueueMonitoringCommand(Command);
5238       return;
5239     }
5240   /*
5241     Deallocate the Command.
5242   */
5243   DAC960_DeallocateCommand(Command);
5244   /*
5245     Wake up any processes waiting on a free Command.
5246   */
5247   wake_up(&Controller->CommandWaitQueue);
5248 }
5249
5250 /*
5251   DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
5252   Controllers.
5253 */
5254
5255 static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
5256                                        void *DeviceIdentifier)
5257 {
5258   DAC960_Controller_T *Controller = DeviceIdentifier;
5259   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5260   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5261   unsigned long flags;
5262
5263   spin_lock_irqsave(&Controller->queue_lock, flags);
5264   DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
5265   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5266   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5267     {
5268        DAC960_V2_CommandIdentifier_T CommandIdentifier =
5269            NextStatusMailbox->Fields.CommandIdentifier;
5270        DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5271        Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5272        Command->V2.RequestSenseLength =
5273            NextStatusMailbox->Fields.RequestSenseLength;
5274        Command->V2.DataTransferResidue =
5275            NextStatusMailbox->Fields.DataTransferResidue;
5276        NextStatusMailbox->Words[0] = 0;
5277        if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5278            NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5279        DAC960_V2_ProcessCompletedCommand(Command);
5280     }
5281   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5282   /*
5283     Attempt to remove additional I/O Requests from the Controller's
5284     I/O Request Queue and queue them to the Controller.
5285   */
5286   DAC960_ProcessRequest(Controller);
5287   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5288   return IRQ_HANDLED;
5289 }
5290
5291 /*
5292   DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
5293   Controllers.
5294 */
5295
5296 static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
5297                                        void *DeviceIdentifier)
5298 {
5299   DAC960_Controller_T *Controller = DeviceIdentifier;
5300   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5301   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5302   unsigned long flags;
5303
5304   spin_lock_irqsave(&Controller->queue_lock, flags);
5305   DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
5306   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5307   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5308     {
5309       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5310         NextStatusMailbox->Fields.CommandIdentifier;
5311       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5312       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5313       Command->V2.RequestSenseLength =
5314         NextStatusMailbox->Fields.RequestSenseLength;
5315       Command->V2.DataTransferResidue =
5316         NextStatusMailbox->Fields.DataTransferResidue;
5317       NextStatusMailbox->Words[0] = 0;
5318       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5319         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5320       DAC960_V2_ProcessCompletedCommand(Command);
5321     }
5322   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5323   /*
5324     Attempt to remove additional I/O Requests from the Controller's
5325     I/O Request Queue and queue them to the Controller.
5326   */
5327   DAC960_ProcessRequest(Controller);
5328   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5329   return IRQ_HANDLED;
5330 }
5331
5332
5333 /*
5334   DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
5335   Controllers.
5336 */
5337
5338 static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
5339                                        void *DeviceIdentifier)
5340 {
5341   DAC960_Controller_T *Controller = DeviceIdentifier;
5342   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5343   DAC960_V2_StatusMailbox_T *NextStatusMailbox;
5344   unsigned long flags;
5345
5346   spin_lock_irqsave(&Controller->queue_lock, flags);
5347   DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
5348   NextStatusMailbox = Controller->V2.NextStatusMailbox;
5349   while (NextStatusMailbox->Fields.CommandIdentifier > 0)
5350     {
5351       DAC960_V2_CommandIdentifier_T CommandIdentifier =
5352         NextStatusMailbox->Fields.CommandIdentifier;
5353       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5354       Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5355       Command->V2.RequestSenseLength =
5356         NextStatusMailbox->Fields.RequestSenseLength;
5357       Command->V2.DataTransferResidue =
5358         NextStatusMailbox->Fields.DataTransferResidue;
5359       NextStatusMailbox->Words[0] = 0;
5360       if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
5361         NextStatusMailbox = Controller->V2.FirstStatusMailbox;
5362       DAC960_V2_ProcessCompletedCommand(Command);
5363     }
5364   Controller->V2.NextStatusMailbox = NextStatusMailbox;
5365   /*
5366     Attempt to remove additional I/O Requests from the Controller's
5367     I/O Request Queue and queue them to the Controller.
5368   */
5369   DAC960_ProcessRequest(Controller);
5370   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5371   return IRQ_HANDLED;
5372 }
5373
5374
5375 /*
5376   DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
5377   Controllers.
5378 */
5379
5380 static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
5381                                        void *DeviceIdentifier)
5382 {
5383   DAC960_Controller_T *Controller = DeviceIdentifier;
5384   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5385   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5386   unsigned long flags;
5387
5388   spin_lock_irqsave(&Controller->queue_lock, flags);
5389   DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
5390   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5391   while (NextStatusMailbox->Fields.Valid)
5392     {
5393       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5394         NextStatusMailbox->Fields.CommandIdentifier;
5395       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5396       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5397       NextStatusMailbox->Word = 0;
5398       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5399         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5400       DAC960_V1_ProcessCompletedCommand(Command);
5401     }
5402   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5403   /*
5404     Attempt to remove additional I/O Requests from the Controller's
5405     I/O Request Queue and queue them to the Controller.
5406   */
5407   DAC960_ProcessRequest(Controller);
5408   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5409   return IRQ_HANDLED;
5410 }
5411
5412
5413 /*
5414   DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
5415   Controllers.
5416 */
5417
5418 static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
5419                                        void *DeviceIdentifier)
5420 {
5421   DAC960_Controller_T *Controller = DeviceIdentifier;
5422   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5423   DAC960_V1_StatusMailbox_T *NextStatusMailbox;
5424   unsigned long flags;
5425
5426   spin_lock_irqsave(&Controller->queue_lock, flags);
5427   DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
5428   NextStatusMailbox = Controller->V1.NextStatusMailbox;
5429   while (NextStatusMailbox->Fields.Valid)
5430     {
5431       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5432         NextStatusMailbox->Fields.CommandIdentifier;
5433       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5434       Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
5435       NextStatusMailbox->Word = 0;
5436       if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
5437         NextStatusMailbox = Controller->V1.FirstStatusMailbox;
5438       DAC960_V1_ProcessCompletedCommand(Command);
5439     }
5440   Controller->V1.NextStatusMailbox = NextStatusMailbox;
5441   /*
5442     Attempt to remove additional I/O Requests from the Controller's
5443     I/O Request Queue and queue them to the Controller.
5444   */
5445   DAC960_ProcessRequest(Controller);
5446   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5447   return IRQ_HANDLED;
5448 }
5449
5450
5451 /*
5452   DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
5453   Controllers.
5454 */
5455
5456 static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
5457                                        void *DeviceIdentifier)
5458 {
5459   DAC960_Controller_T *Controller = DeviceIdentifier;
5460   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5461   unsigned long flags;
5462
5463   spin_lock_irqsave(&Controller->queue_lock, flags);
5464   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5465     {
5466       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5467         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5468       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5469       Command->V1.CommandStatus =
5470         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5471       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5472       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5473       DAC960_V1_ProcessCompletedCommand(Command);
5474     }
5475   /*
5476     Attempt to remove additional I/O Requests from the Controller's
5477     I/O Request Queue and queue them to the Controller.
5478   */
5479   DAC960_ProcessRequest(Controller);
5480   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5481   return IRQ_HANDLED;
5482 }
5483
5484
5485 /*
5486   DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
5487   Controllers.
5488
5489   Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
5490   on the data having been placed into DAC960_Controller_T, rather than
5491   an arbitrary buffer.
5492 */
5493
5494 static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
5495                                       void *DeviceIdentifier)
5496 {
5497   DAC960_Controller_T *Controller = DeviceIdentifier;
5498   void __iomem *ControllerBaseAddress = Controller->BaseAddress;
5499   unsigned long flags;
5500
5501   spin_lock_irqsave(&Controller->queue_lock, flags);
5502   while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
5503     {
5504       DAC960_V1_CommandIdentifier_T CommandIdentifier =
5505         DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
5506       DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
5507       DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5508       DAC960_V1_CommandOpcode_T CommandOpcode =
5509         CommandMailbox->Common.CommandOpcode;
5510       Command->V1.CommandStatus =
5511         DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
5512       DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
5513       DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
5514       switch (CommandOpcode)
5515         {
5516         case DAC960_V1_Enquiry_Old:
5517           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
5518           DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
5519           break;
5520         case DAC960_V1_GetDeviceState_Old:
5521           Command->V1.CommandMailbox.Common.CommandOpcode =
5522                                                 DAC960_V1_GetDeviceState;
5523           DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
5524           break;
5525         case DAC960_V1_Read_Old:
5526           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
5527           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5528           break;
5529         case DAC960_V1_Write_Old:
5530           Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
5531           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5532           break;
5533         case DAC960_V1_ReadWithScatterGather_Old:
5534           Command->V1.CommandMailbox.Common.CommandOpcode =
5535             DAC960_V1_ReadWithScatterGather;
5536           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5537           break;
5538         case DAC960_V1_WriteWithScatterGather_Old:
5539           Command->V1.CommandMailbox.Common.CommandOpcode =
5540             DAC960_V1_WriteWithScatterGather;
5541           DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
5542           break;
5543         default:
5544           break;
5545         }
5546       DAC960_V1_ProcessCompletedCommand(Command);
5547     }
5548   /*
5549     Attempt to remove additional I/O Requests from the Controller's
5550     I/O Request Queue and queue them to the Controller.
5551   */
5552   DAC960_ProcessRequest(Controller);
5553   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5554   return IRQ_HANDLED;
5555 }
5556
5557
5558 /*
5559   DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
5560   Firmware Controllers.
5561 */
5562
5563 static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
5564 {
5565   DAC960_Controller_T *Controller = Command->Controller;
5566   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5567   DAC960_V1_ClearCommand(Command);
5568   Command->CommandType = DAC960_MonitoringCommand;
5569   CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
5570   CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
5571   DAC960_QueueCommand(Command);
5572 }
5573
5574
5575 /*
5576   DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
5577   Firmware Controllers.
5578 */
5579
5580 static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
5581 {
5582   DAC960_Controller_T *Controller = Command->Controller;
5583   DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
5584   DAC960_V2_ClearCommand(Command);
5585   Command->CommandType = DAC960_MonitoringCommand;
5586   CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
5587   CommandMailbox->ControllerInfo.CommandControlBits
5588                                 .DataTransferControllerToHost = true;
5589   CommandMailbox->ControllerInfo.CommandControlBits
5590                                 .NoAutoRequestSense = true;
5591   CommandMailbox->ControllerInfo.DataTransferSize =
5592     sizeof(DAC960_V2_ControllerInfo_T);
5593   CommandMailbox->ControllerInfo.ControllerNumber = 0;
5594   CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
5595   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5596                                 .ScatterGatherSegments[0]
5597                                 .SegmentDataPointer =
5598     Controller->V2.NewControllerInformationDMA;
5599   CommandMailbox->ControllerInfo.DataTransferMemoryAddress
5600                                 .ScatterGatherSegments[0]
5601                                 .SegmentByteCount =
5602     CommandMailbox->ControllerInfo.DataTransferSize;
5603   DAC960_QueueCommand(Command);
5604 }
5605
5606
5607 /*
5608   DAC960_MonitoringTimerFunction is the timer function for monitoring
5609   the status of DAC960 Controllers.
5610 */
5611
5612 static void DAC960_MonitoringTimerFunction(unsigned long TimerData)
5613 {
5614   DAC960_Controller_T *Controller = (DAC960_Controller_T *) TimerData;
5615   DAC960_Command_T *Command;
5616   unsigned long flags;
5617
5618   if (Controller->FirmwareType == DAC960_V1_Controller)
5619     {
5620       spin_lock_irqsave(&Controller->queue_lock, flags);
5621       /*
5622         Queue a Status Monitoring Command to Controller.
5623       */
5624       Command = DAC960_AllocateCommand(Controller);
5625       if (Command != NULL)
5626         DAC960_V1_QueueMonitoringCommand(Command);
5627       else Controller->MonitoringCommandDeferred = true;
5628       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5629     }
5630   else
5631     {
5632       DAC960_V2_ControllerInfo_T *ControllerInfo =
5633         &Controller->V2.ControllerInformation;
5634       unsigned int StatusChangeCounter =
5635         Controller->V2.HealthStatusBuffer->StatusChangeCounter;
5636       bool ForceMonitoringCommand = false;
5637       if (time_after(jiffies, Controller->SecondaryMonitoringTime
5638           + DAC960_SecondaryMonitoringInterval))
5639         {
5640           int LogicalDriveNumber;
5641           for (LogicalDriveNumber = 0;
5642                LogicalDriveNumber < DAC960_MaxLogicalDrives;
5643                LogicalDriveNumber++)
5644             {
5645               DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
5646                 Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
5647               if (LogicalDeviceInfo == NULL) continue;
5648               if (!LogicalDeviceInfo->LogicalDeviceControl
5649                                      .LogicalDeviceInitialized)
5650                 {
5651                   ForceMonitoringCommand = true;
5652                   break;
5653                 }
5654             }
5655           Controller->SecondaryMonitoringTime = jiffies;
5656         }
5657       if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
5658           Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
5659           == Controller->V2.NextEventSequenceNumber &&
5660           (ControllerInfo->BackgroundInitializationsActive +
5661            ControllerInfo->LogicalDeviceInitializationsActive +
5662            ControllerInfo->PhysicalDeviceInitializationsActive +
5663            ControllerInfo->ConsistencyChecksActive +
5664            ControllerInfo->RebuildsActive +
5665            ControllerInfo->OnlineExpansionsActive == 0 ||
5666            time_before(jiffies, Controller->PrimaryMonitoringTime
5667            + DAC960_MonitoringTimerInterval)) &&
5668           !ForceMonitoringCommand)
5669         {
5670           Controller->MonitoringTimer.expires =
5671             jiffies + DAC960_HealthStatusMonitoringInterval;
5672             add_timer(&Controller->MonitoringTimer);
5673           return;
5674         }
5675       Controller->V2.StatusChangeCounter = StatusChangeCounter;
5676       Controller->PrimaryMonitoringTime = jiffies;
5677
5678       spin_lock_irqsave(&Controller->queue_lock, flags);
5679       /*
5680         Queue a Status Monitoring Command to Controller.
5681       */
5682       Command = DAC960_AllocateCommand(Controller);
5683       if (Command != NULL)
5684         DAC960_V2_QueueMonitoringCommand(Command);
5685       else Controller->MonitoringCommandDeferred = true;
5686       spin_unlock_irqrestore(&Controller->queue_lock, flags);
5687       /*
5688         Wake up any processes waiting on a Health Status Buffer change.
5689       */
5690       wake_up(&Controller->HealthStatusWaitQueue);
5691     }
5692 }
5693
5694 /*
5695   DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
5696   additional bytes in the Combined Status Buffer and grows the buffer if
5697   necessary.  It returns true if there is enough room and false otherwise.
5698 */
5699
5700 static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
5701                                         unsigned int ByteCount)
5702 {
5703   unsigned char *NewStatusBuffer;
5704   if (Controller->InitialStatusLength + 1 +
5705       Controller->CurrentStatusLength + ByteCount + 1 <=
5706       Controller->CombinedStatusBufferLength)
5707     return true;
5708   if (Controller->CombinedStatusBufferLength == 0)
5709     {
5710       unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
5711       while (NewStatusBufferLength < ByteCount)
5712         NewStatusBufferLength *= 2;
5713       Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
5714                                                   GFP_ATOMIC);
5715       if (Controller->CombinedStatusBuffer == NULL) return false;
5716       Controller->CombinedStatusBufferLength = NewStatusBufferLength;
5717       return true;
5718     }
5719   NewStatusBuffer = kmalloc(2 * Controller->CombinedStatusBufferLength,
5720                              GFP_ATOMIC);
5721   if (NewStatusBuffer == NULL)
5722     {
5723       DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
5724                      Controller);
5725       return false;
5726     }
5727   memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
5728          Controller->CombinedStatusBufferLength);
5729   kfree(Controller->CombinedStatusBuffer);
5730   Controller->CombinedStatusBuffer = NewStatusBuffer;
5731   Controller->CombinedStatusBufferLength *= 2;
5732   Controller->CurrentStatusBuffer =
5733     &NewStatusBuffer[Controller->InitialStatusLength + 1];
5734   return true;
5735 }
5736
5737
5738 /*
5739   DAC960_Message prints Driver Messages.
5740 */
5741
5742 static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
5743                            unsigned char *Format,
5744                            DAC960_Controller_T *Controller,
5745                            ...)
5746 {
5747   static unsigned char Buffer[DAC960_LineBufferSize];
5748   static bool BeginningOfLine = true;
5749   va_list Arguments;
5750   int Length = 0;
5751   va_start(Arguments, Controller);
5752   Length = vsprintf(Buffer, Format, Arguments);
5753   va_end(Arguments);
5754   if (Controller == NULL)
5755     printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5756            DAC960_ControllerCount, Buffer);
5757   else if (MessageLevel == DAC960_AnnounceLevel ||
5758            MessageLevel == DAC960_InfoLevel)
5759     {
5760       if (!Controller->ControllerInitialized)
5761         {
5762           if (DAC960_CheckStatusBuffer(Controller, Length))
5763             {
5764               strcpy(&Controller->CombinedStatusBuffer
5765                                   [Controller->InitialStatusLength],
5766                      Buffer);
5767               Controller->InitialStatusLength += Length;
5768               Controller->CurrentStatusBuffer =
5769                 &Controller->CombinedStatusBuffer
5770                              [Controller->InitialStatusLength + 1];
5771             }
5772           if (MessageLevel == DAC960_AnnounceLevel)
5773             {
5774               static int AnnouncementLines = 0;
5775               if (++AnnouncementLines <= 2)
5776                 printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
5777                        Buffer);
5778             }
5779           else
5780             {
5781               if (BeginningOfLine)
5782                 {
5783                   if (Buffer[0] != '\n' || Length > 1)
5784                     printk("%sDAC960#%d: %s",
5785                            DAC960_MessageLevelMap[MessageLevel],
5786                            Controller->ControllerNumber, Buffer);
5787                 }
5788               else printk("%s", Buffer);
5789             }
5790         }
5791       else if (DAC960_CheckStatusBuffer(Controller, Length))
5792         {
5793           strcpy(&Controller->CurrentStatusBuffer[
5794                     Controller->CurrentStatusLength], Buffer);
5795           Controller->CurrentStatusLength += Length;
5796         }
5797     }
5798   else if (MessageLevel == DAC960_ProgressLevel)
5799     {
5800       strcpy(Controller->ProgressBuffer, Buffer);
5801       Controller->ProgressBufferLength = Length;
5802       if (Controller->EphemeralProgressMessage)
5803         {
5804           if (time_after_eq(jiffies, Controller->LastProgressReportTime
5805               + DAC960_ProgressReportingInterval))
5806             {
5807               printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5808                      Controller->ControllerNumber, Buffer);
5809               Controller->LastProgressReportTime = jiffies;
5810             }
5811         }
5812       else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5813                   Controller->ControllerNumber, Buffer);
5814     }
5815   else if (MessageLevel == DAC960_UserCriticalLevel)
5816     {
5817       strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
5818              Buffer);
5819       Controller->UserStatusLength += Length;
5820       if (Buffer[0] != '\n' || Length > 1)
5821         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5822                Controller->ControllerNumber, Buffer);
5823     }
5824   else
5825     {
5826       if (BeginningOfLine)
5827         printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
5828                Controller->ControllerNumber, Buffer);
5829       else printk("%s", Buffer);
5830     }
5831   BeginningOfLine = (Buffer[Length-1] == '\n');
5832 }
5833
5834
5835 /*
5836   DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
5837   Channel:TargetID specification from a User Command string.  It updates
5838   Channel and TargetID and returns true on success and false on failure.
5839 */
5840
5841 static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
5842                                           char *UserCommandString,
5843                                           unsigned char *Channel,
5844                                           unsigned char *TargetID)
5845 {
5846   char *NewUserCommandString = UserCommandString;
5847   unsigned long XChannel, XTargetID;
5848   while (*UserCommandString == ' ') UserCommandString++;
5849   if (UserCommandString == NewUserCommandString)
5850     return false;
5851   XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5852   if (NewUserCommandString == UserCommandString ||
5853       *NewUserCommandString != ':' ||
5854       XChannel >= Controller->Channels)
5855     return false;
5856   UserCommandString = ++NewUserCommandString;
5857   XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5858   if (NewUserCommandString == UserCommandString ||
5859       *NewUserCommandString != '\0' ||
5860       XTargetID >= Controller->Targets)
5861     return false;
5862   *Channel = XChannel;
5863   *TargetID = XTargetID;
5864   return true;
5865 }
5866
5867
5868 /*
5869   DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
5870   specification from a User Command string.  It updates LogicalDriveNumber and
5871   returns true on success and false on failure.
5872 */
5873
5874 static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
5875                                         char *UserCommandString,
5876                                         unsigned char *LogicalDriveNumber)
5877 {
5878   char *NewUserCommandString = UserCommandString;
5879   unsigned long XLogicalDriveNumber;
5880   while (*UserCommandString == ' ') UserCommandString++;
5881   if (UserCommandString == NewUserCommandString)
5882     return false;
5883   XLogicalDriveNumber =
5884     simple_strtoul(UserCommandString, &NewUserCommandString, 10);
5885   if (NewUserCommandString == UserCommandString ||
5886       *NewUserCommandString != '\0' ||
5887       XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
5888     return false;
5889   *LogicalDriveNumber = XLogicalDriveNumber;
5890   return true;
5891 }
5892
5893
5894 /*
5895   DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
5896   DAC960 V1 Firmware Controllers.
5897 */
5898
5899 static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
5900                                      DAC960_Command_T *Command,
5901                                      unsigned char Channel,
5902                                      unsigned char TargetID,
5903                                      DAC960_V1_PhysicalDeviceState_T
5904                                        DeviceState,
5905                                      const unsigned char *DeviceStateString)
5906 {
5907   DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
5908   CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
5909   CommandMailbox->Type3D.Channel = Channel;
5910   CommandMailbox->Type3D.TargetID = TargetID;
5911   CommandMailbox->Type3D.DeviceState = DeviceState;
5912   CommandMailbox->Type3D.Modifier = 0;
5913   DAC960_ExecuteCommand(Command);
5914   switch (Command->V1.CommandStatus)
5915     {
5916     case DAC960_V1_NormalCompletion:
5917       DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
5918                           DeviceStateString, Channel, TargetID);
5919       break;
5920     case DAC960_V1_UnableToStartDevice:
5921       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5922                           "Unable to Start Device\n", Controller,
5923                           DeviceStateString, Channel, TargetID);
5924       break;
5925     case DAC960_V1_NoDeviceAtAddress:
5926       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5927                           "No Device at Address\n", Controller,
5928                           DeviceStateString, Channel, TargetID);
5929       break;
5930     case DAC960_V1_InvalidChannelOrTargetOrModifier:
5931       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5932                           "Invalid Channel or Target or Modifier\n",
5933                           Controller, DeviceStateString, Channel, TargetID);
5934       break;
5935     case DAC960_V1_ChannelBusy:
5936       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5937                           "Channel Busy\n", Controller,
5938                           DeviceStateString, Channel, TargetID);
5939       break;
5940     default:
5941       DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
5942                           "Unexpected Status %04X\n", Controller,
5943                           DeviceStateString, Channel, TargetID,
5944                           Command->V1.CommandStatus);
5945       break;
5946     }
5947 }
5948
5949
5950 /*
5951   DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
5952   Controllers.
5953 */
5954
5955 static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
5956                                             unsigned char *UserCommand)
5957 {
5958   DAC960_Command_T *Command;
5959   DAC960_V1_CommandMailbox_T *CommandMailbox;
5960   unsigned long flags;
5961   unsigned char Channel, TargetID, LogicalDriveNumber;
5962
5963   spin_lock_irqsave(&Controller->queue_lock, flags);
5964   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
5965     DAC960_WaitForCommand(Controller);
5966   spin_unlock_irqrestore(&Controller->queue_lock, flags);
5967   Controller->UserStatusLength = 0;
5968   DAC960_V1_ClearCommand(Command);
5969   Command->CommandType = DAC960_ImmediateCommand;
5970   CommandMailbox = &Command->V1.CommandMailbox;
5971   if (strcmp(UserCommand, "flush-cache") == 0)
5972     {
5973       CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
5974       DAC960_ExecuteCommand(Command);
5975       DAC960_UserCritical("Cache Flush Completed\n", Controller);
5976     }
5977   else if (strncmp(UserCommand, "kill", 4) == 0 &&
5978            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
5979                                       &Channel, &TargetID))
5980     {
5981       DAC960_V1_DeviceState_T *DeviceState =
5982         &Controller->V1.DeviceState[Channel][TargetID];
5983       if (DeviceState->Present &&
5984           DeviceState->DeviceType == DAC960_V1_DiskType &&
5985           DeviceState->DeviceState != DAC960_V1_Device_Dead)
5986         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
5987                                  DAC960_V1_Device_Dead, "Kill");
5988       else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
5989                                Controller, Channel, TargetID);
5990     }
5991   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
5992            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
5993                                       &Channel, &TargetID))
5994     {
5995       DAC960_V1_DeviceState_T *DeviceState =
5996         &Controller->V1.DeviceState[Channel][TargetID];
5997       if (DeviceState->Present &&
5998           DeviceState->DeviceType == DAC960_V1_DiskType &&
5999           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6000         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6001                                  DAC960_V1_Device_Online, "Make Online");
6002       else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
6003                                Controller, Channel, TargetID);
6004
6005     }
6006   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6007            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6008                                       &Channel, &TargetID))
6009     {
6010       DAC960_V1_DeviceState_T *DeviceState =
6011         &Controller->V1.DeviceState[Channel][TargetID];
6012       if (DeviceState->Present &&
6013           DeviceState->DeviceType == DAC960_V1_DiskType &&
6014           DeviceState->DeviceState == DAC960_V1_Device_Dead)
6015         DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
6016                                  DAC960_V1_Device_Standby, "Make Standby");
6017       else DAC960_UserCritical("Make Standby of Physical "
6018                                "Device %d:%d Illegal\n",
6019                                Controller, Channel, TargetID);
6020     }
6021   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6022            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6023                                       &Channel, &TargetID))
6024     {
6025       CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
6026       CommandMailbox->Type3D.Channel = Channel;
6027       CommandMailbox->Type3D.TargetID = TargetID;
6028       DAC960_ExecuteCommand(Command);
6029       switch (Command->V1.CommandStatus)
6030         {
6031         case DAC960_V1_NormalCompletion:
6032           DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
6033                               Controller, Channel, TargetID);
6034           break;
6035         case DAC960_V1_AttemptToRebuildOnlineDrive:
6036           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6037                               "Attempt to Rebuild Online or "
6038                               "Unresponsive Drive\n",
6039                               Controller, Channel, TargetID);
6040           break;
6041         case DAC960_V1_NewDiskFailedDuringRebuild:
6042           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6043                               "New Disk Failed During Rebuild\n",
6044                               Controller, Channel, TargetID);
6045           break;
6046         case DAC960_V1_InvalidDeviceAddress:
6047           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6048                               "Invalid Device Address\n",
6049                               Controller, Channel, TargetID);
6050           break;
6051         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6052           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6053                               "Rebuild or Consistency Check Already "
6054                               "in Progress\n", Controller, Channel, TargetID);
6055           break;
6056         default:
6057           DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
6058                               "Unexpected Status %04X\n", Controller,
6059                               Channel, TargetID, Command->V1.CommandStatus);
6060           break;
6061         }
6062     }
6063   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6064            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6065                                     &LogicalDriveNumber))
6066     {
6067       CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
6068       CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
6069       CommandMailbox->Type3C.AutoRestore = true;
6070       DAC960_ExecuteCommand(Command);
6071       switch (Command->V1.CommandStatus)
6072         {
6073         case DAC960_V1_NormalCompletion:
6074           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6075                               "(/dev/rd/c%dd%d) Initiated\n",
6076                               Controller, LogicalDriveNumber,
6077                               Controller->ControllerNumber,
6078                               LogicalDriveNumber);
6079           break;
6080         case DAC960_V1_DependentDiskIsDead:
6081           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6082                               "(/dev/rd/c%dd%d) Failed - "
6083                               "Dependent Physical Device is DEAD\n",
6084                               Controller, LogicalDriveNumber,
6085                               Controller->ControllerNumber,
6086                               LogicalDriveNumber);
6087           break;
6088         case DAC960_V1_InvalidOrNonredundantLogicalDrive:
6089           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6090                               "(/dev/rd/c%dd%d) Failed - "
6091                               "Invalid or Nonredundant Logical Drive\n",
6092                               Controller, LogicalDriveNumber,
6093                               Controller->ControllerNumber,
6094                               LogicalDriveNumber);
6095           break;
6096         case DAC960_V1_RebuildOrCheckAlreadyInProgress:
6097           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6098                               "(/dev/rd/c%dd%d) Failed - Rebuild or "
6099                               "Consistency Check Already in Progress\n",
6100                               Controller, LogicalDriveNumber,
6101                               Controller->ControllerNumber,
6102                               LogicalDriveNumber);
6103           break;
6104         default:
6105           DAC960_UserCritical("Consistency Check of Logical Drive %d "
6106                               "(/dev/rd/c%dd%d) Failed - "
6107                               "Unexpected Status %04X\n",
6108                               Controller, LogicalDriveNumber,
6109                               Controller->ControllerNumber,
6110                               LogicalDriveNumber, Command->V1.CommandStatus);
6111           break;
6112         }
6113     }
6114   else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
6115            strcmp(UserCommand, "cancel-consistency-check") == 0)
6116     {
6117       /*
6118         the OldRebuildRateConstant is never actually used
6119         once its value is retrieved from the controller.
6120        */
6121       unsigned char *OldRebuildRateConstant;
6122       dma_addr_t OldRebuildRateConstantDMA;
6123
6124       OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
6125                 sizeof(char), &OldRebuildRateConstantDMA);
6126       if (OldRebuildRateConstant == NULL) {
6127          DAC960_UserCritical("Cancellation of Rebuild or "
6128                              "Consistency Check Failed - "
6129                              "Out of Memory",
6130                              Controller);
6131          goto failure;
6132       }
6133       CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
6134       CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
6135       CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
6136       DAC960_ExecuteCommand(Command);
6137       switch (Command->V1.CommandStatus)
6138         {
6139         case DAC960_V1_NormalCompletion:
6140           DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
6141                               Controller);
6142           break;
6143         default:
6144           DAC960_UserCritical("Cancellation of Rebuild or "
6145                               "Consistency Check Failed - "
6146                               "Unexpected Status %04X\n",
6147                               Controller, Command->V1.CommandStatus);
6148           break;
6149         }
6150 failure:
6151         pci_free_consistent(Controller->PCIDevice, sizeof(char),
6152                 OldRebuildRateConstant, OldRebuildRateConstantDMA);
6153     }
6154   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6155                            Controller, UserCommand);
6156
6157   spin_lock_irqsave(&Controller->queue_lock, flags);
6158   DAC960_DeallocateCommand(Command);
6159   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6160   return true;
6161 }
6162
6163
6164 /*
6165   DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
6166   TargetID into a Logical Device.  It returns true on success and false
6167   on failure.
6168 */
6169
6170 static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
6171                                                  unsigned char Channel,
6172                                                  unsigned char TargetID,
6173                                                  unsigned short
6174                                                    *LogicalDeviceNumber)
6175 {
6176   DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
6177   DAC960_Controller_T *Controller =  Command->Controller;
6178
6179   CommandMailbox = &Command->V2.CommandMailbox;
6180   memcpy(&SavedCommandMailbox, CommandMailbox,
6181          sizeof(DAC960_V2_CommandMailbox_T));
6182
6183   CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
6184   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6185                                     .DataTransferControllerToHost = true;
6186   CommandMailbox->PhysicalDeviceInfo.CommandControlBits
6187                                     .NoAutoRequestSense = true;
6188   CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
6189     sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
6190   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
6191   CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
6192   CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
6193     DAC960_V2_TranslatePhysicalToLogicalDevice;
6194   CommandMailbox->Common.DataTransferMemoryAddress
6195                         .ScatterGatherSegments[0]
6196                         .SegmentDataPointer =
6197                 Controller->V2.PhysicalToLogicalDeviceDMA;
6198   CommandMailbox->Common.DataTransferMemoryAddress
6199                         .ScatterGatherSegments[0]
6200                         .SegmentByteCount =
6201                 CommandMailbox->Common.DataTransferSize;
6202
6203   DAC960_ExecuteCommand(Command);
6204   *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
6205
6206   memcpy(CommandMailbox, &SavedCommandMailbox,
6207          sizeof(DAC960_V2_CommandMailbox_T));
6208   return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
6209 }
6210
6211
6212 /*
6213   DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
6214   Controllers.
6215 */
6216
6217 static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
6218                                             unsigned char *UserCommand)
6219 {
6220   DAC960_Command_T *Command;
6221   DAC960_V2_CommandMailbox_T *CommandMailbox;
6222   unsigned long flags;
6223   unsigned char Channel, TargetID, LogicalDriveNumber;
6224   unsigned short LogicalDeviceNumber;
6225
6226   spin_lock_irqsave(&Controller->queue_lock, flags);
6227   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6228     DAC960_WaitForCommand(Controller);
6229   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6230   Controller->UserStatusLength = 0;
6231   DAC960_V2_ClearCommand(Command);
6232   Command->CommandType = DAC960_ImmediateCommand;
6233   CommandMailbox = &Command->V2.CommandMailbox;
6234   CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
6235   CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
6236   CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
6237   if (strcmp(UserCommand, "flush-cache") == 0)
6238     {
6239       CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
6240       CommandMailbox->DeviceOperation.OperationDevice =
6241         DAC960_V2_RAID_Controller;
6242       DAC960_ExecuteCommand(Command);
6243       DAC960_UserCritical("Cache Flush Completed\n", Controller);
6244     }
6245   else if (strncmp(UserCommand, "kill", 4) == 0 &&
6246            DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
6247                                       &Channel, &TargetID) &&
6248            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6249                                              &LogicalDeviceNumber))
6250     {
6251       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6252         LogicalDeviceNumber;
6253       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6254         DAC960_V2_SetDeviceState;
6255       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6256         DAC960_V2_Device_Dead;
6257       DAC960_ExecuteCommand(Command);
6258       DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
6259                           Controller, Channel, TargetID,
6260                           (Command->V2.CommandStatus
6261                            == DAC960_V2_NormalCompletion
6262                            ? "Succeeded" : "Failed"));
6263     }
6264   else if (strncmp(UserCommand, "make-online", 11) == 0 &&
6265            DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
6266                                       &Channel, &TargetID) &&
6267            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6268                                              &LogicalDeviceNumber))
6269     {
6270       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6271         LogicalDeviceNumber;
6272       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6273         DAC960_V2_SetDeviceState;
6274       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6275         DAC960_V2_Device_Online;
6276       DAC960_ExecuteCommand(Command);
6277       DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
6278                           Controller, Channel, TargetID,
6279                           (Command->V2.CommandStatus
6280                            == DAC960_V2_NormalCompletion
6281                            ? "Succeeded" : "Failed"));
6282     }
6283   else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
6284            DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
6285                                       &Channel, &TargetID) &&
6286            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6287                                              &LogicalDeviceNumber))
6288     {
6289       CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
6290         LogicalDeviceNumber;
6291       CommandMailbox->SetDeviceState.IOCTL_Opcode =
6292         DAC960_V2_SetDeviceState;
6293       CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
6294         DAC960_V2_Device_Standby;
6295       DAC960_ExecuteCommand(Command);
6296       DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
6297                           Controller, Channel, TargetID,
6298                           (Command->V2.CommandStatus
6299                            == DAC960_V2_NormalCompletion
6300                            ? "Succeeded" : "Failed"));
6301     }
6302   else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
6303            DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
6304                                       &Channel, &TargetID) &&
6305            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6306                                              &LogicalDeviceNumber))
6307     {
6308       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6309         LogicalDeviceNumber;
6310       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6311         DAC960_V2_RebuildDeviceStart;
6312       DAC960_ExecuteCommand(Command);
6313       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6314                           Controller, Channel, TargetID,
6315                           (Command->V2.CommandStatus
6316                            == DAC960_V2_NormalCompletion
6317                            ? "Initiated" : "Not Initiated"));
6318     }
6319   else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
6320            DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
6321                                       &Channel, &TargetID) &&
6322            DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
6323                                              &LogicalDeviceNumber))
6324     {
6325       CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
6326         LogicalDeviceNumber;
6327       CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
6328         DAC960_V2_RebuildDeviceStop;
6329       DAC960_ExecuteCommand(Command);
6330       DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
6331                           Controller, Channel, TargetID,
6332                           (Command->V2.CommandStatus
6333                            == DAC960_V2_NormalCompletion
6334                            ? "Cancelled" : "Not Cancelled"));
6335     }
6336   else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
6337            DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
6338                                     &LogicalDriveNumber))
6339     {
6340       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6341         LogicalDriveNumber;
6342       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6343         DAC960_V2_ConsistencyCheckStart;
6344       CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
6345       CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
6346       DAC960_ExecuteCommand(Command);
6347       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6348                           "(/dev/rd/c%dd%d) %s\n",
6349                           Controller, LogicalDriveNumber,
6350                           Controller->ControllerNumber,
6351                           LogicalDriveNumber,
6352                           (Command->V2.CommandStatus
6353                            == DAC960_V2_NormalCompletion
6354                            ? "Initiated" : "Not Initiated"));
6355     }
6356   else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
6357            DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
6358                                     &LogicalDriveNumber))
6359     {
6360       CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
6361         LogicalDriveNumber;
6362       CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
6363         DAC960_V2_ConsistencyCheckStop;
6364       DAC960_ExecuteCommand(Command);
6365       DAC960_UserCritical("Consistency Check of Logical Drive %d "
6366                           "(/dev/rd/c%dd%d) %s\n",
6367                           Controller, LogicalDriveNumber,
6368                           Controller->ControllerNumber,
6369                           LogicalDriveNumber,
6370                           (Command->V2.CommandStatus
6371                            == DAC960_V2_NormalCompletion
6372                            ? "Cancelled" : "Not Cancelled"));
6373     }
6374   else if (strcmp(UserCommand, "perform-discovery") == 0)
6375     {
6376       CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
6377       DAC960_ExecuteCommand(Command);
6378       DAC960_UserCritical("Discovery %s\n", Controller,
6379                           (Command->V2.CommandStatus
6380                            == DAC960_V2_NormalCompletion
6381                            ? "Initiated" : "Not Initiated"));
6382       if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
6383         {
6384           CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
6385           CommandMailbox->ControllerInfo.CommandControlBits
6386                                         .DataTransferControllerToHost = true;
6387           CommandMailbox->ControllerInfo.CommandControlBits
6388                                         .NoAutoRequestSense = true;
6389           CommandMailbox->ControllerInfo.DataTransferSize =
6390             sizeof(DAC960_V2_ControllerInfo_T);
6391           CommandMailbox->ControllerInfo.ControllerNumber = 0;
6392           CommandMailbox->ControllerInfo.IOCTL_Opcode =
6393             DAC960_V2_GetControllerInfo;
6394           /*
6395            * How does this NOT race with the queued Monitoring
6396            * usage of this structure?
6397            */
6398           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6399                                         .ScatterGatherSegments[0]
6400                                         .SegmentDataPointer =
6401             Controller->V2.NewControllerInformationDMA;
6402           CommandMailbox->ControllerInfo.DataTransferMemoryAddress
6403                                         .ScatterGatherSegments[0]
6404                                         .SegmentByteCount =
6405             CommandMailbox->ControllerInfo.DataTransferSize;
6406           DAC960_ExecuteCommand(Command);
6407           while (Controller->V2.NewControllerInformation->PhysicalScanActive)
6408             {
6409               DAC960_ExecuteCommand(Command);
6410               sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
6411             }
6412           DAC960_UserCritical("Discovery Completed\n", Controller);
6413         }
6414     }
6415   else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
6416     Controller->SuppressEnclosureMessages = true;
6417   else DAC960_UserCritical("Illegal User Command: '%s'\n",
6418                            Controller, UserCommand);
6419
6420   spin_lock_irqsave(&Controller->queue_lock, flags);
6421   DAC960_DeallocateCommand(Command);
6422   spin_unlock_irqrestore(&Controller->queue_lock, flags);
6423   return true;
6424 }
6425
6426 static int dac960_proc_show(struct seq_file *m, void *v)
6427 {
6428   unsigned char *StatusMessage = "OK\n";
6429   int ControllerNumber;
6430   for (ControllerNumber = 0;
6431        ControllerNumber < DAC960_ControllerCount;
6432        ControllerNumber++)
6433     {
6434       DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
6435       if (Controller == NULL) continue;
6436       if (Controller->MonitoringAlertMode)
6437         {
6438           StatusMessage = "ALERT\n";
6439           break;
6440         }
6441     }
6442   seq_puts(m, StatusMessage);
6443   return 0;
6444 }
6445
6446 static int dac960_proc_open(struct inode *inode, struct file *file)
6447 {
6448         return single_open(file, dac960_proc_show, NULL);
6449 }
6450
6451 static const struct file_operations dac960_proc_fops = {
6452         .owner          = THIS_MODULE,
6453         .open           = dac960_proc_open,
6454         .read           = seq_read,
6455         .llseek         = seq_lseek,
6456         .release        = single_release,
6457 };
6458
6459 static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
6460 {
6461         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6462         seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
6463         return 0;
6464 }
6465
6466 static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
6467 {
6468         return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
6469 }
6470
6471 static const struct file_operations dac960_initial_status_proc_fops = {
6472         .owner          = THIS_MODULE,
6473         .open           = dac960_initial_status_proc_open,
6474         .read           = seq_read,
6475         .llseek         = seq_lseek,
6476         .release        = single_release,
6477 };
6478
6479 static int dac960_current_status_proc_show(struct seq_file *m, void *v)
6480 {
6481   DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
6482   unsigned char *StatusMessage =
6483     "No Rebuild or Consistency Check in Progress\n";
6484   int ProgressMessageLength = strlen(StatusMessage);
6485   if (jiffies != Controller->LastCurrentStatusTime)
6486     {
6487       Controller->CurrentStatusLength = 0;
6488       DAC960_AnnounceDriver(Controller);
6489       DAC960_ReportControllerConfiguration(Controller);
6490       DAC960_ReportDeviceConfiguration(Controller);
6491       if (Controller->ProgressBufferLength > 0)
6492         ProgressMessageLength = Controller->ProgressBufferLength;
6493       if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
6494         {
6495           unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
6496           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6497           CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
6498           if (Controller->ProgressBufferLength > 0)
6499             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6500                    Controller->ProgressBuffer);
6501           else
6502             strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
6503                    StatusMessage);
6504           Controller->CurrentStatusLength += ProgressMessageLength;
6505         }
6506       Controller->LastCurrentStatusTime = jiffies;
6507     }
6508         seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
6509         return 0;
6510 }
6511
6512 static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
6513 {
6514         return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
6515 }
6516
6517 static const struct file_operations dac960_current_status_proc_fops = {
6518         .owner          = THIS_MODULE,
6519         .open           = dac960_current_status_proc_open,
6520         .read           = seq_read,
6521         .llseek         = seq_lseek,
6522         .release        = single_release,
6523 };
6524
6525 static int dac960_user_command_proc_show(struct seq_file *m, void *v)
6526 {
6527         DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
6528
6529         seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
6530         return 0;
6531 }
6532
6533 static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
6534 {
6535         return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
6536 }
6537
6538 static ssize_t dac960_user_command_proc_write(struct file *file,
6539                                        const char __user *Buffer,
6540                                        size_t Count, loff_t *pos)
6541 {
6542   DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
6543   unsigned char CommandBuffer[80];
6544   int Length;
6545   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
6546   if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
6547   CommandBuffer[Count] = '\0';
6548   Length = strlen(CommandBuffer);
6549   if (Length > 0 && CommandBuffer[Length-1] == '\n')
6550     CommandBuffer[--Length] = '\0';
6551   if (Controller->FirmwareType == DAC960_V1_Controller)
6552     return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
6553             ? Count : -EBUSY);
6554   else
6555     return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
6556             ? Count : -EBUSY);
6557 }
6558
6559 static const struct file_operations dac960_user_command_proc_fops = {
6560         .owner          = THIS_MODULE,
6561         .open           = dac960_user_command_proc_open,
6562         .read           = seq_read,
6563         .llseek         = seq_lseek,
6564         .release        = single_release,
6565         .write          = dac960_user_command_proc_write,
6566 };
6567
6568 /*
6569   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
6570   DAC960 Driver.
6571 */
6572
6573 static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
6574 {
6575         struct proc_dir_entry *StatusProcEntry;
6576         struct proc_dir_entry *ControllerProcEntry;
6577         struct proc_dir_entry *UserCommandProcEntry;
6578
6579         if (DAC960_ProcDirectoryEntry == NULL) {
6580                 DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
6581                 StatusProcEntry = proc_create("status", 0,
6582                                            DAC960_ProcDirectoryEntry,
6583                                            &dac960_proc_fops);
6584         }
6585
6586       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
6587       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
6588                                        DAC960_ProcDirectoryEntry);
6589       proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
6590       proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
6591       UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
6592       Controller->ControllerProcEntry = ControllerProcEntry;
6593 }
6594
6595
6596 /*
6597   DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
6598   DAC960 Driver.
6599 */
6600
6601 static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
6602 {
6603       if (Controller->ControllerProcEntry == NULL)
6604               return;
6605       remove_proc_entry("initial_status", Controller->ControllerProcEntry);
6606       remove_proc_entry("current_status", Controller->ControllerProcEntry);
6607       remove_proc_entry("user_command", Controller->ControllerProcEntry);
6608       remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
6609       Controller->ControllerProcEntry = NULL;
6610 }
6611
6612 #ifdef DAC960_GAM_MINOR
6613
6614 /*
6615  * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
6616 */
6617
6618 static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
6619                                                 unsigned long Argument)
6620 {
6621   long ErrorCode = 0;
6622   if (!capable(CAP_SYS_ADMIN)) return -EACCES;
6623
6624   lock_kernel();
6625   switch (Request)
6626     {
6627     case DAC960_IOCTL_GET_CONTROLLER_COUNT:
6628       ErrorCode = DAC960_ControllerCount;
6629       break;
6630     case DAC960_IOCTL_GET_CONTROLLER_INFO:
6631       {
6632         DAC960_ControllerInfo_T __user *UserSpaceControllerInfo =
6633           (DAC960_ControllerInfo_T __user *) Argument;
6634         DAC960_ControllerInfo_T ControllerInfo;
6635         DAC960_Controller_T *Controller;
6636         int ControllerNumber;
6637         if (UserSpaceControllerInfo == NULL)
6638                 ErrorCode = -EINVAL;
6639         else ErrorCode = get_user(ControllerNumber,
6640                              &UserSpaceControllerInfo->ControllerNumber);
6641         if (ErrorCode != 0)
6642                 break;
6643         ErrorCode = -ENXIO;
6644         if (ControllerNumber < 0 ||
6645             ControllerNumber > DAC960_ControllerCount - 1) {
6646           break;
6647         }
6648         Controller = DAC960_Controllers[ControllerNumber];
6649         if (Controller == NULL)
6650                 break;
6651         memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
6652         ControllerInfo.ControllerNumber = ControllerNumber;
6653         ControllerInfo.FirmwareType = Controller->FirmwareType;
6654         ControllerInfo.Channels = Controller->Channels;
6655         ControllerInfo.Targets = Controller->Targets;
6656         ControllerInfo.PCI_Bus = Controller->Bus;
6657         ControllerInfo.PCI_Device = Controller->Device;
6658         ControllerInfo.PCI_Function = Controller->Function;
6659         ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
6660         ControllerInfo.PCI_Address = Controller->PCI_Address;
6661         strcpy(ControllerInfo.ModelName, Controller->ModelName);
6662         strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
6663         ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
6664                              sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
6665         break;
6666       }
6667     case DAC960_IOCTL_V1_EXECUTE_COMMAND:
6668       {
6669         DAC960_V1_UserCommand_T __user *UserSpaceUserCommand =
6670           (DAC960_V1_UserCommand_T __user *) Argument;
6671         DAC960_V1_UserCommand_T UserCommand;
6672         DAC960_Controller_T *Controller;
6673         DAC960_Command_T *Command = NULL;
6674         DAC960_V1_CommandOpcode_T CommandOpcode;
6675         DAC960_V1_CommandStatus_T CommandStatus;
6676         DAC960_V1_DCDB_T DCDB;
6677         DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
6678         dma_addr_t      DCDB_IOBUFDMA;
6679         unsigned long flags;
6680         int ControllerNumber, DataTransferLength;
6681         unsigned char *DataTransferBuffer = NULL;
6682         dma_addr_t DataTransferBufferDMA;
6683         if (UserSpaceUserCommand == NULL) {
6684                 ErrorCode = -EINVAL;
6685                 break;
6686         }
6687         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6688                                    sizeof(DAC960_V1_UserCommand_T))) {
6689                 ErrorCode = -EFAULT;
6690                 break;
6691         }
6692         ControllerNumber = UserCommand.ControllerNumber;
6693         ErrorCode = -ENXIO;
6694         if (ControllerNumber < 0 ||
6695             ControllerNumber > DAC960_ControllerCount - 1)
6696                 break;
6697         Controller = DAC960_Controllers[ControllerNumber];
6698         if (Controller == NULL)
6699                 break;
6700         ErrorCode = -EINVAL;
6701         if (Controller->FirmwareType != DAC960_V1_Controller)
6702                 break;
6703         CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
6704         DataTransferLength = UserCommand.DataTransferLength;
6705         if (CommandOpcode & 0x80)
6706                 break;
6707         if (CommandOpcode == DAC960_V1_DCDB)
6708           {
6709             if (copy_from_user(&DCDB, UserCommand.DCDB,
6710                                sizeof(DAC960_V1_DCDB_T))) {
6711                 ErrorCode = -EFAULT;
6712                 break;
6713             }
6714             if (DCDB.Channel >= DAC960_V1_MaxChannels)
6715                         break;
6716             if (!((DataTransferLength == 0 &&
6717                    DCDB.Direction
6718                    == DAC960_V1_DCDB_NoDataTransfer) ||
6719                   (DataTransferLength > 0 &&
6720                    DCDB.Direction
6721                    == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
6722                   (DataTransferLength < 0 &&
6723                    DCDB.Direction
6724                    == DAC960_V1_DCDB_DataTransferSystemToDevice)))
6725                         break;
6726             if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
6727                 != abs(DataTransferLength))
6728                         break;
6729             DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
6730                         sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
6731             if (DCDB_IOBUF == NULL) {
6732                         ErrorCode = -ENOMEM;
6733                         break;
6734                 }
6735           }
6736         ErrorCode = -ENOMEM;
6737         if (DataTransferLength > 0)
6738           {
6739             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6740                                 DataTransferLength, &DataTransferBufferDMA);
6741             if (DataTransferBuffer == NULL)
6742                 break;
6743             memset(DataTransferBuffer, 0, DataTransferLength);
6744           }
6745         else if (DataTransferLength < 0)
6746           {
6747             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6748                                 -DataTransferLength, &DataTransferBufferDMA);
6749             if (DataTransferBuffer == NULL)
6750                 break;
6751             if (copy_from_user(DataTransferBuffer,
6752                                UserCommand.DataTransferBuffer,
6753                                -DataTransferLength)) {
6754                 ErrorCode = -EFAULT;
6755                 break;
6756             }
6757           }
6758         if (CommandOpcode == DAC960_V1_DCDB)
6759           {
6760             spin_lock_irqsave(&Controller->queue_lock, flags);
6761             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6762               DAC960_WaitForCommand(Controller);
6763             while (Controller->V1.DirectCommandActive[DCDB.Channel]
6764                                                      [DCDB.TargetID])
6765               {
6766                 spin_unlock_irq(&Controller->queue_lock);
6767                 __wait_event(Controller->CommandWaitQueue,
6768                              !Controller->V1.DirectCommandActive
6769                                              [DCDB.Channel][DCDB.TargetID]);
6770                 spin_lock_irq(&Controller->queue_lock);
6771               }
6772             Controller->V1.DirectCommandActive[DCDB.Channel]
6773                                               [DCDB.TargetID] = true;
6774             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6775             DAC960_V1_ClearCommand(Command);
6776             Command->CommandType = DAC960_ImmediateCommand;
6777             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6778                    sizeof(DAC960_V1_CommandMailbox_T));
6779             Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
6780             DCDB.BusAddress = DataTransferBufferDMA;
6781             memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
6782           }
6783         else
6784           {
6785             spin_lock_irqsave(&Controller->queue_lock, flags);
6786             while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6787               DAC960_WaitForCommand(Controller);
6788             spin_unlock_irqrestore(&Controller->queue_lock, flags);
6789             DAC960_V1_ClearCommand(Command);
6790             Command->CommandType = DAC960_ImmediateCommand;
6791             memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
6792                    sizeof(DAC960_V1_CommandMailbox_T));
6793             if (DataTransferBuffer != NULL)
6794               Command->V1.CommandMailbox.Type3.BusAddress =
6795                 DataTransferBufferDMA;
6796           }
6797         DAC960_ExecuteCommand(Command);
6798         CommandStatus = Command->V1.CommandStatus;
6799         spin_lock_irqsave(&Controller->queue_lock, flags);
6800         DAC960_DeallocateCommand(Command);
6801         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6802         if (DataTransferLength > 0)
6803           {
6804             if (copy_to_user(UserCommand.DataTransferBuffer,
6805                              DataTransferBuffer, DataTransferLength)) {
6806                 ErrorCode = -EFAULT;
6807                 goto Failure1;
6808             }
6809           }
6810         if (CommandOpcode == DAC960_V1_DCDB)
6811           {
6812             /*
6813               I don't believe Target or Channel in the DCDB_IOBUF
6814               should be any different from the contents of DCDB.
6815              */
6816             Controller->V1.DirectCommandActive[DCDB.Channel]
6817                                               [DCDB.TargetID] = false;
6818             if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
6819                              sizeof(DAC960_V1_DCDB_T))) {
6820                 ErrorCode = -EFAULT;
6821                 goto Failure1;
6822             }
6823           }
6824         ErrorCode = CommandStatus;
6825       Failure1:
6826         if (DataTransferBuffer != NULL)
6827           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6828                         DataTransferBuffer, DataTransferBufferDMA);
6829         if (DCDB_IOBUF != NULL)
6830           pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
6831                         DCDB_IOBUF, DCDB_IOBUFDMA);
6832         break;
6833       }
6834     case DAC960_IOCTL_V2_EXECUTE_COMMAND:
6835       {
6836         DAC960_V2_UserCommand_T __user *UserSpaceUserCommand =
6837           (DAC960_V2_UserCommand_T __user *) Argument;
6838         DAC960_V2_UserCommand_T UserCommand;
6839         DAC960_Controller_T *Controller;
6840         DAC960_Command_T *Command = NULL;
6841         DAC960_V2_CommandMailbox_T *CommandMailbox;
6842         DAC960_V2_CommandStatus_T CommandStatus;
6843         unsigned long flags;
6844         int ControllerNumber, DataTransferLength;
6845         int DataTransferResidue, RequestSenseLength;
6846         unsigned char *DataTransferBuffer = NULL;
6847         dma_addr_t DataTransferBufferDMA;
6848         unsigned char *RequestSenseBuffer = NULL;
6849         dma_addr_t RequestSenseBufferDMA;
6850
6851         ErrorCode = -EINVAL;
6852         if (UserSpaceUserCommand == NULL)
6853                 break;
6854         if (copy_from_user(&UserCommand, UserSpaceUserCommand,
6855                            sizeof(DAC960_V2_UserCommand_T))) {
6856                 ErrorCode = -EFAULT;
6857                 break;
6858         }
6859         ErrorCode = -ENXIO;
6860         ControllerNumber = UserCommand.ControllerNumber;
6861         if (ControllerNumber < 0 ||
6862             ControllerNumber > DAC960_ControllerCount - 1)
6863                 break;
6864         Controller = DAC960_Controllers[ControllerNumber];
6865         if (Controller == NULL)
6866                 break;
6867         if (Controller->FirmwareType != DAC960_V2_Controller){
6868                 ErrorCode = -EINVAL;
6869                 break;
6870         }
6871         DataTransferLength = UserCommand.DataTransferLength;
6872         ErrorCode = -ENOMEM;
6873         if (DataTransferLength > 0)
6874           {
6875             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6876                                 DataTransferLength, &DataTransferBufferDMA);
6877             if (DataTransferBuffer == NULL)
6878                 break;
6879             memset(DataTransferBuffer, 0, DataTransferLength);
6880           }
6881         else if (DataTransferLength < 0)
6882           {
6883             DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
6884                                 -DataTransferLength, &DataTransferBufferDMA);
6885             if (DataTransferBuffer == NULL)
6886                 break;
6887             if (copy_from_user(DataTransferBuffer,
6888                                UserCommand.DataTransferBuffer,
6889                                -DataTransferLength)) {
6890                 ErrorCode = -EFAULT;
6891                 goto Failure2;
6892             }
6893           }
6894         RequestSenseLength = UserCommand.RequestSenseLength;
6895         if (RequestSenseLength > 0)
6896           {
6897             RequestSenseBuffer = pci_alloc_consistent(Controller->PCIDevice,
6898                         RequestSenseLength, &RequestSenseBufferDMA);
6899             if (RequestSenseBuffer == NULL)
6900               {
6901                 ErrorCode = -ENOMEM;
6902                 goto Failure2;
6903               }
6904             memset(RequestSenseBuffer, 0, RequestSenseLength);
6905           }
6906         spin_lock_irqsave(&Controller->queue_lock, flags);
6907         while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
6908           DAC960_WaitForCommand(Controller);
6909         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6910         DAC960_V2_ClearCommand(Command);
6911         Command->CommandType = DAC960_ImmediateCommand;
6912         CommandMailbox = &Command->V2.CommandMailbox;
6913         memcpy(CommandMailbox, &UserCommand.CommandMailbox,
6914                sizeof(DAC960_V2_CommandMailbox_T));
6915         CommandMailbox->Common.CommandControlBits
6916                               .AdditionalScatterGatherListMemory = false;
6917         CommandMailbox->Common.CommandControlBits
6918                               .NoAutoRequestSense = true;
6919         CommandMailbox->Common.DataTransferSize = 0;
6920         CommandMailbox->Common.DataTransferPageNumber = 0;
6921         memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
6922                sizeof(DAC960_V2_DataTransferMemoryAddress_T));
6923         if (DataTransferLength != 0)
6924           {
6925             if (DataTransferLength > 0)
6926               {
6927                 CommandMailbox->Common.CommandControlBits
6928                                       .DataTransferControllerToHost = true;
6929                 CommandMailbox->Common.DataTransferSize = DataTransferLength;
6930               }
6931             else
6932               {
6933                 CommandMailbox->Common.CommandControlBits
6934                                       .DataTransferControllerToHost = false;
6935                 CommandMailbox->Common.DataTransferSize = -DataTransferLength;
6936               }
6937             CommandMailbox->Common.DataTransferMemoryAddress
6938                                   .ScatterGatherSegments[0]
6939                                   .SegmentDataPointer = DataTransferBufferDMA;
6940             CommandMailbox->Common.DataTransferMemoryAddress
6941                                   .ScatterGatherSegments[0]
6942                                   .SegmentByteCount =
6943               CommandMailbox->Common.DataTransferSize;
6944           }
6945         if (RequestSenseLength > 0)
6946           {
6947             CommandMailbox->Common.CommandControlBits
6948                                   .NoAutoRequestSense = false;
6949             CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
6950             CommandMailbox->Common.RequestSenseBusAddress =
6951                                                         RequestSenseBufferDMA;
6952           }
6953         DAC960_ExecuteCommand(Command);
6954         CommandStatus = Command->V2.CommandStatus;
6955         RequestSenseLength = Command->V2.RequestSenseLength;
6956         DataTransferResidue = Command->V2.DataTransferResidue;
6957         spin_lock_irqsave(&Controller->queue_lock, flags);
6958         DAC960_DeallocateCommand(Command);
6959         spin_unlock_irqrestore(&Controller->queue_lock, flags);
6960         if (RequestSenseLength > UserCommand.RequestSenseLength)
6961           RequestSenseLength = UserCommand.RequestSenseLength;
6962         if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
6963                                  &DataTransferResidue,
6964                                  sizeof(DataTransferResidue))) {
6965                 ErrorCode = -EFAULT;
6966                 goto Failure2;
6967         }
6968         if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
6969                          &RequestSenseLength, sizeof(RequestSenseLength))) {
6970                 ErrorCode = -EFAULT;
6971                 goto Failure2;
6972         }
6973         if (DataTransferLength > 0)
6974           {
6975             if (copy_to_user(UserCommand.DataTransferBuffer,
6976                              DataTransferBuffer, DataTransferLength)) {
6977                 ErrorCode = -EFAULT;
6978                 goto Failure2;
6979             }
6980           }
6981         if (RequestSenseLength > 0)
6982           {
6983             if (copy_to_user(UserCommand.RequestSenseBuffer,
6984                              RequestSenseBuffer, RequestSenseLength)) {
6985                 ErrorCode = -EFAULT;
6986                 goto Failure2;
6987             }
6988           }
6989         ErrorCode = CommandStatus;
6990       Failure2:
6991           pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
6992                 DataTransferBuffer, DataTransferBufferDMA);
6993         if (RequestSenseBuffer != NULL)
6994           pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
6995                 RequestSenseBuffer, RequestSenseBufferDMA);
6996         break;
6997       }
6998     case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
6999       {
7000         DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus =
7001           (DAC960_V2_GetHealthStatus_T __user *) Argument;
7002         DAC960_V2_GetHealthStatus_T GetHealthStatus;
7003         DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
7004         DAC960_Controller_T *Controller;
7005         int ControllerNumber;
7006         if (UserSpaceGetHealthStatus == NULL) {
7007                 ErrorCode = -EINVAL;
7008                 break;
7009         }
7010         if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
7011                            sizeof(DAC960_V2_GetHealthStatus_T))) {
7012                 ErrorCode = -EFAULT;
7013                 break;
7014         }
7015         ErrorCode = -ENXIO;
7016         ControllerNumber = GetHealthStatus.ControllerNumber;
7017         if (ControllerNumber < 0 ||
7018             ControllerNumber > DAC960_ControllerCount - 1)
7019                     break;
7020         Controller = DAC960_Controllers[ControllerNumber];
7021         if (Controller == NULL)
7022                 break;
7023         if (Controller->FirmwareType != DAC960_V2_Controller) {
7024                 ErrorCode = -EINVAL;
7025                 break;
7026         }
7027         if (copy_from_user(&HealthStatusBuffer,
7028                            GetHealthStatus.HealthStatusBuffer,
7029                            sizeof(DAC960_V2_HealthStatusBuffer_T))) {
7030                 ErrorCode = -EFAULT;
7031                 break;
7032         }
7033         while (Controller->V2.HealthStatusBuffer->StatusChangeCounter
7034                == HealthStatusBuffer.StatusChangeCounter &&
7035                Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
7036                == HealthStatusBuffer.NextEventSequenceNumber)
7037           {
7038             interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue,
7039                                            DAC960_MonitoringTimerInterval);
7040             if (signal_pending(current)) {
7041                 ErrorCode = -EINTR;
7042                 break;
7043             }
7044           }
7045         if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
7046                          Controller->V2.HealthStatusBuffer,
7047                          sizeof(DAC960_V2_HealthStatusBuffer_T)))
7048                 ErrorCode = -EFAULT;
7049         else
7050                 ErrorCode =  0;
7051       }
7052       default:
7053         ErrorCode = -ENOTTY;
7054     }
7055   unlock_kernel();
7056   return ErrorCode;
7057 }
7058
7059 static const struct file_operations DAC960_gam_fops = {
7060         .owner          = THIS_MODULE,
7061         .unlocked_ioctl = DAC960_gam_ioctl
7062 };
7063
7064 static struct miscdevice DAC960_gam_dev = {
7065         DAC960_GAM_MINOR,
7066         "dac960_gam",
7067         &DAC960_gam_fops
7068 };
7069
7070 static int DAC960_gam_init(void)
7071 {
7072         int ret;
7073
7074         ret = misc_register(&DAC960_gam_dev);
7075         if (ret)
7076                 printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
7077         return ret;
7078 }
7079
7080 static void DAC960_gam_cleanup(void)
7081 {
7082         misc_deregister(&DAC960_gam_dev);
7083 }
7084
7085 #endif /* DAC960_GAM_MINOR */
7086
7087 static struct DAC960_privdata DAC960_GEM_privdata = {
7088         .HardwareType =         DAC960_GEM_Controller,
7089         .FirmwareType   =       DAC960_V2_Controller,
7090         .InterruptHandler =     DAC960_GEM_InterruptHandler,
7091         .MemoryWindowSize =     DAC960_GEM_RegisterWindowSize,
7092 };
7093
7094
7095 static struct DAC960_privdata DAC960_BA_privdata = {
7096         .HardwareType =         DAC960_BA_Controller,
7097         .FirmwareType   =       DAC960_V2_Controller,
7098         .InterruptHandler =     DAC960_BA_InterruptHandler,
7099         .MemoryWindowSize =     DAC960_BA_RegisterWindowSize,
7100 };
7101
7102 static struct DAC960_privdata DAC960_LP_privdata = {
7103         .HardwareType =         DAC960_LP_Controller,
7104         .FirmwareType   =       DAC960_LP_Controller,
7105         .InterruptHandler =     DAC960_LP_InterruptHandler,
7106         .MemoryWindowSize =     DAC960_LP_RegisterWindowSize,
7107 };
7108
7109 static struct DAC960_privdata DAC960_LA_privdata = {
7110         .HardwareType =         DAC960_LA_Controller,
7111         .FirmwareType   =       DAC960_V1_Controller,
7112         .InterruptHandler =     DAC960_LA_InterruptHandler,
7113         .MemoryWindowSize =     DAC960_LA_RegisterWindowSize,
7114 };
7115
7116 static struct DAC960_privdata DAC960_PG_privdata = {
7117         .HardwareType =         DAC960_PG_Controller,
7118         .FirmwareType   =       DAC960_V1_Controller,
7119         .InterruptHandler =     DAC960_PG_InterruptHandler,
7120         .MemoryWindowSize =     DAC960_PG_RegisterWindowSize,
7121 };
7122
7123 static struct DAC960_privdata DAC960_PD_privdata = {
7124         .HardwareType =         DAC960_PD_Controller,
7125         .FirmwareType   =       DAC960_V1_Controller,
7126         .InterruptHandler =     DAC960_PD_InterruptHandler,
7127         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7128 };
7129
7130 static struct DAC960_privdata DAC960_P_privdata = {
7131         .HardwareType =         DAC960_P_Controller,
7132         .FirmwareType   =       DAC960_V1_Controller,
7133         .InterruptHandler =     DAC960_P_InterruptHandler,
7134         .MemoryWindowSize =     DAC960_PD_RegisterWindowSize,
7135 };
7136
7137 static struct pci_device_id DAC960_id_table[] = {
7138         {
7139                 .vendor         = PCI_VENDOR_ID_MYLEX,
7140                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
7141                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7142                 .subdevice      = PCI_ANY_ID,
7143                 .driver_data    = (unsigned long) &DAC960_GEM_privdata,
7144         },
7145         {
7146                 .vendor         = PCI_VENDOR_ID_MYLEX,
7147                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_BA,
7148                 .subvendor      = PCI_ANY_ID,
7149                 .subdevice      = PCI_ANY_ID,
7150                 .driver_data    = (unsigned long) &DAC960_BA_privdata,
7151         },
7152         {
7153                 .vendor         = PCI_VENDOR_ID_MYLEX,
7154                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_LP,
7155                 .subvendor      = PCI_ANY_ID,
7156                 .subdevice      = PCI_ANY_ID,
7157                 .driver_data    = (unsigned long) &DAC960_LP_privdata,
7158         },
7159         {
7160                 .vendor         = PCI_VENDOR_ID_DEC,
7161                 .device         = PCI_DEVICE_ID_DEC_21285,
7162                 .subvendor      = PCI_VENDOR_ID_MYLEX,
7163                 .subdevice      = PCI_DEVICE_ID_MYLEX_DAC960_LA,
7164                 .driver_data    = (unsigned long) &DAC960_LA_privdata,
7165         },
7166         {
7167                 .vendor         = PCI_VENDOR_ID_MYLEX,
7168                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PG,
7169                 .subvendor      = PCI_ANY_ID,
7170                 .subdevice      = PCI_ANY_ID,
7171                 .driver_data    = (unsigned long) &DAC960_PG_privdata,
7172         },
7173         {
7174                 .vendor         = PCI_VENDOR_ID_MYLEX,
7175                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_PD,
7176                 .subvendor      = PCI_ANY_ID,
7177                 .subdevice      = PCI_ANY_ID,
7178                 .driver_data    = (unsigned long) &DAC960_PD_privdata,
7179         },
7180         {
7181                 .vendor         = PCI_VENDOR_ID_MYLEX,
7182                 .device         = PCI_DEVICE_ID_MYLEX_DAC960_P,
7183                 .subvendor      = PCI_ANY_ID,
7184                 .subdevice      = PCI_ANY_ID,
7185                 .driver_data    = (unsigned long) &DAC960_P_privdata,
7186         },
7187         {0, },
7188 };
7189
7190 MODULE_DEVICE_TABLE(pci, DAC960_id_table);
7191
7192 static struct pci_driver DAC960_pci_driver = {
7193         .name           = "DAC960",
7194         .id_table       = DAC960_id_table,
7195         .probe          = DAC960_Probe,
7196         .remove         = DAC960_Remove,
7197 };
7198
7199 static int __init DAC960_init_module(void)
7200 {
7201         int ret;
7202
7203         ret =  pci_register_driver(&DAC960_pci_driver);
7204 #ifdef DAC960_GAM_MINOR
7205         if (!ret)
7206                 DAC960_gam_init();
7207 #endif
7208         return ret;
7209 }
7210
7211 static void __exit DAC960_cleanup_module(void)
7212 {
7213         int i;
7214
7215 #ifdef DAC960_GAM_MINOR
7216         DAC960_gam_cleanup();
7217 #endif
7218
7219         for (i = 0; i < DAC960_ControllerCount; i++) {
7220                 DAC960_Controller_T *Controller = DAC960_Controllers[i];
7221                 if (Controller == NULL)
7222                         continue;
7223                 DAC960_FinalizeController(Controller);
7224         }
7225         if (DAC960_ProcDirectoryEntry != NULL) {
7226                 remove_proc_entry("rd/status", NULL);
7227                 remove_proc_entry("rd", NULL);
7228         }
7229         DAC960_ControllerCount = 0;
7230         pci_unregister_driver(&DAC960_pci_driver);
7231 }
7232
7233 module_init(DAC960_init_module);
7234 module_exit(DAC960_cleanup_module);
7235
7236 MODULE_LICENSE("GPL");