Linux-2.6.12-rc2
[safe/jmp/linux-2.6] / arch / arm / mach-lh7a40x / arch-lpd7a40x.c
1 /* arch/arm/mach-lh7a40x/arch-lpd7a40x.c
2  *
3  *  Copyright (C) 2004 Logic Product Development
4  *
5  *  This program is free software; you can redistribute it and/or
6  *  modify it under the terms of the GNU General Public License
7  *  version 2 as published by the Free Software Foundation.
8  *
9  */
10
11 #include <linux/tty.h>
12 #include <linux/init.h>
13 #include <linux/device.h>
14 #include <linux/interrupt.h>
15
16 #include <asm/hardware.h>
17 #include <asm/setup.h>
18 #include <asm/mach-types.h>
19 #include <asm/mach/arch.h>
20 #include <asm/irq.h>
21 #include <asm/mach/irq.h>
22 #include <asm/mach/map.h>
23
24 #include "common.h"
25
26 static struct resource smc91x_resources[] = {
27         [0] = {
28                 .start  = CPLD00_PHYS,
29                 .end    = CPLD00_PHYS + CPLD00_SIZE - 1, /* Only needs 16B */
30                 .flags  = IORESOURCE_MEM,
31         },
32
33         [1] = {
34                 .start  = IRQ_LPD7A40X_ETH_INT,
35                 .end    = IRQ_LPD7A40X_ETH_INT,
36                 .flags  = IORESOURCE_IRQ,
37         },
38
39 };
40
41 static struct platform_device smc91x_device = {
42         .name           = "smc91x",
43         .id             = 0,
44         .num_resources  = ARRAY_SIZE(smc91x_resources),
45         .resource       = smc91x_resources,
46 };
47
48 static struct resource lh7a40x_usbclient_resources[] = {
49         [0] = {
50                 .start  = USB_PHYS,
51                 .end    = (USB_PHYS + 0xFF),
52                 .flags  = IORESOURCE_MEM,
53         },
54         [1] = {
55                 .start  = IRQ_USBINTR,
56                 .end    = IRQ_USBINTR,
57                 .flags  = IORESOURCE_IRQ,
58         },
59 };
60
61 static u64 lh7a40x_usbclient_dma_mask = 0xffffffffUL;
62
63 static struct platform_device lh7a40x_usbclient_device = {
64         .name           = "lh7a40x_udc",
65         .id             = 0,
66         .dev            = {
67                 .dma_mask = &lh7a40x_usbclient_dma_mask,
68                 .coherent_dma_mask = 0xffffffffUL,
69         },
70         .num_resources  = ARRAY_SIZE (lh7a40x_usbclient_resources),
71         .resource       = lh7a40x_usbclient_resources,
72 };
73
74 #if defined (CONFIG_ARCH_LH7A404)
75
76 static struct resource lh7a404_usbhost_resources [] = {
77         [0] = {
78                 .start  = USBH_PHYS,
79                 .end    = (USBH_PHYS + 0xFF),
80                 .flags  = IORESOURCE_MEM,
81         },
82         [1] = {
83                 .start  = IRQ_USHINTR,
84                 .end    = IRQ_USHINTR,
85                 .flags  = IORESOURCE_IRQ,
86         },
87 };
88
89 static u64 lh7a404_usbhost_dma_mask = 0xffffffffUL;
90
91 static struct platform_device lh7a404_usbhost_device = {
92         .name           = "lh7a404-ohci",
93         .id             = 0,
94         .dev            = {
95                 .dma_mask = &lh7a404_usbhost_dma_mask,
96                 .coherent_dma_mask = 0xffffffffUL,
97         },
98         .num_resources  = ARRAY_SIZE (lh7a404_usbhost_resources),
99         .resource       = lh7a404_usbhost_resources,
100 };
101
102 #endif
103
104 static struct platform_device *lpd7a40x_devs[] __initdata = {
105         &smc91x_device,
106         &lh7a40x_usbclient_device,
107 #if defined (CONFIG_ARCH_LH7A404)
108         &lh7a404_usbhost_device,
109 #endif
110 };
111
112 extern void lpd7a400_map_io (void);
113
114 static void __init lpd7a40x_init (void)
115 {
116         CPLD_CONTROL |=     (1<<6); /* Mask USB1 connection IRQ */
117         CPLD_CONTROL &= ~(0
118                           | (1<<1) /* Disable LCD */
119                           | (1<<0) /* Enable WLAN */
120                 );
121
122         platform_add_devices (lpd7a40x_devs, ARRAY_SIZE (lpd7a40x_devs));
123 }
124
125 static void lh7a40x_ack_cpld_irq (u32 irq)
126 {
127         /* CPLD doesn't have ack capability */
128 }
129
130 static void lh7a40x_mask_cpld_irq (u32 irq)
131 {
132         switch (irq) {
133         case IRQ_LPD7A40X_ETH_INT:
134                 CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4;
135                 break;
136         case IRQ_LPD7A400_TS:
137                 CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8;
138                 break;
139         }
140 }
141
142 static void lh7a40x_unmask_cpld_irq (u32 irq)
143 {
144         switch (irq) {
145         case IRQ_LPD7A40X_ETH_INT:
146                 CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4;
147                 break;
148         case IRQ_LPD7A400_TS:
149                 CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8;
150                 break;
151         }
152 }
153
154 static struct irqchip lpd7a40x_cpld_chip = {
155         .ack    = lh7a40x_ack_cpld_irq,
156         .mask   = lh7a40x_mask_cpld_irq,
157         .unmask = lh7a40x_unmask_cpld_irq,
158 };
159
160 static void lpd7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc,
161                                   struct pt_regs *regs)
162 {
163         unsigned int mask = CPLD_INTERRUPTS;
164
165         desc->chip->ack (irq);
166
167         if ((mask & 0x1) == 0)  /* WLAN */
168                 IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
169
170         if ((mask & 0x2) == 0)  /* Touch */
171                 IRQ_DISPATCH (IRQ_LPD7A400_TS);
172
173         desc->chip->unmask (irq); /* Level-triggered need this */
174 }
175
176
177 void __init lh7a40x_init_board_irq (void)
178 {
179         int irq;
180
181                 /* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
182                                  PF7 supports the CPLD.
183                    Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
184                                  PF3 supports the CPLD.
185                    (Some) LPD7A404 prerelease boards report a version
186                    number of 0x16, but we force an override since the
187                    hardware is of the newer variety.
188                 */
189
190         unsigned char cpld_version = CPLD_REVISION;
191         int pinCPLD = (cpld_version == 0x28) ? 7 : 3;
192
193 #if defined CONFIG_MACH_LPD7A404
194         cpld_version = 0x34;    /* Coerce LPD7A404 to RevB */
195 #endif
196
197                 /* First, configure user controlled GPIOF interrupts  */
198
199         GPIO_PFDD       &= ~0x0f; /* PF0-3 are inputs */
200         GPIO_INTTYPE1   &= ~0x0f; /* PF0-3 are level triggered */
201         GPIO_INTTYPE2   &= ~0x0f; /* PF0-3 are active low */
202         barrier ();
203         GPIO_GPIOFINTEN |=  0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
204
205                 /* Then, configure CPLD interrupt */
206
207         CPLD_INTERRUPTS =   0x9c; /* Disable all CPLD interrupts */
208         GPIO_PFDD       &= ~(1 << pinCPLD); /* Make input */
209         GPIO_INTTYPE1   |=  (1 << pinCPLD); /* Edge triggered */
210         GPIO_INTTYPE2   &= ~(1 << pinCPLD); /* Active low */
211         barrier ();
212         GPIO_GPIOFINTEN |=  (1 << pinCPLD); /* Enable */
213
214                 /* Cascade CPLD interrupts */
215
216         for (irq = IRQ_BOARD_START;
217              irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
218                 set_irq_chip (irq, &lpd7a40x_cpld_chip);
219                 set_irq_handler (irq, do_edge_IRQ);
220                 set_irq_flags (irq, IRQF_VALID);
221         }
222
223         set_irq_chained_handler ((cpld_version == 0x28)
224                                  ? IRQ_CPLD_V28
225                                  : IRQ_CPLD_V34,
226                                  lpd7a40x_cpld_handler);
227 }
228
229 static struct map_desc lpd7a400_io_desc[] __initdata = {
230         {     IO_VIRT,      IO_PHYS,        IO_SIZE,    MT_DEVICE },
231         /* Mapping added to work around chip select problems */
232         { IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE },
233         { CF_VIRT,      CF_PHYS,        CF_SIZE,        MT_DEVICE },
234         /* This mapping is redundant since the smc driver performs another. */
235 /*      { CPLD00_VIRT,  CPLD00_PHYS,    CPLD00_SIZE,    MT_DEVICE }, */
236         { CPLD02_VIRT,  CPLD02_PHYS,    CPLD02_SIZE,    MT_DEVICE },
237         { CPLD06_VIRT,  CPLD06_PHYS,    CPLD06_SIZE,    MT_DEVICE },
238         { CPLD08_VIRT,  CPLD08_PHYS,    CPLD08_SIZE,    MT_DEVICE },
239         { CPLD0C_VIRT,  CPLD0C_PHYS,    CPLD0C_SIZE,    MT_DEVICE },
240         { CPLD0E_VIRT,  CPLD0E_PHYS,    CPLD0E_SIZE,    MT_DEVICE },
241         { CPLD10_VIRT,  CPLD10_PHYS,    CPLD10_SIZE,    MT_DEVICE },
242         { CPLD12_VIRT,  CPLD12_PHYS,    CPLD12_SIZE,    MT_DEVICE },
243         { CPLD14_VIRT,  CPLD14_PHYS,    CPLD14_SIZE,    MT_DEVICE },
244         { CPLD16_VIRT,  CPLD16_PHYS,    CPLD16_SIZE,    MT_DEVICE },
245         { CPLD18_VIRT,  CPLD18_PHYS,    CPLD18_SIZE,    MT_DEVICE },
246         { CPLD1A_VIRT,  CPLD1A_PHYS,    CPLD1A_SIZE,    MT_DEVICE },
247 };
248
249 void __init
250 lpd7a400_map_io(void)
251 {
252         iotable_init (lpd7a400_io_desc, ARRAY_SIZE (lpd7a400_io_desc));
253
254                 /* Fixup (improve) Static Memory Controller settings */
255         SMC_BCR0 = 0x200039af;  /* Boot Flash */
256         SMC_BCR6 = 0x1000fbe0;  /* CPLD */
257         SMC_BCR7 = 0x1000b2c2;  /* Compact Flash */
258 }
259
260 #ifdef CONFIG_MACH_LPD7A400
261
262 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
263         MAINTAINER ("Marc Singer")
264         BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000))
265         BOOT_PARAMS (0xc0000100)
266         MAPIO (lpd7a400_map_io)
267         INITIRQ (lh7a400_init_irq)
268         .timer          = &lh7a40x_timer,
269         INIT_MACHINE (lpd7a40x_init)
270 MACHINE_END
271
272 #endif
273
274 #ifdef CONFIG_MACH_LPD7A404
275
276 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
277         MAINTAINER ("Marc Singer")
278         BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000))
279         BOOT_PARAMS (0xc0000100)
280         MAPIO (lpd7a400_map_io)
281         INITIRQ (lh7a404_init_irq)
282         .timer          = &lh7a40x_timer,
283         INIT_MACHINE (lpd7a40x_init)
284 MACHINE_END
285
286 #endif