SAFE public projects git trees. - safe/jmp/linux-2.6/blob - arch/arm/mach-ixp4xx/common.c

   1 /*
   2  * arch/arm/mach-ixp4xx/common.c
   3  *
   4  * Generic code shared across all IXP4XX platforms
   5  *
   6  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
   7  *
   8  * Copyright 2002 (c) Intel Corporation
   9  * Copyright 2003-2004 (c) MontaVista, Software, Inc.
  10  *
  11  * This file is licensed under  the terms of the GNU General Public
  12  * License version 2. This program is licensed "as is" without any
  13  * warranty of any kind, whether express or implied.
  14  */
  15
  16 #include <linux/config.h>
  17 #include <linux/kernel.h>
  18 #include <linux/mm.h>
  19 #include <linux/init.h>
  20 #include <linux/serial.h>
  21 #include <linux/sched.h>
  22 #include <linux/tty.h>
  23 #include <linux/serial_core.h>
  24 #include <linux/bootmem.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/bitops.h>
  27 #include <linux/time.h>
  28 #include <linux/timex.h>
  29
  30 #include <asm/hardware.h>
  31 #include <asm/uaccess.h>
  32 #include <asm/io.h>
  33 #include <asm/pgtable.h>
  34 #include <asm/page.h>
  35 #include <asm/irq.h>
  36
  37 #include <asm/mach/map.h>
  38 #include <asm/mach/irq.h>
  39 #include <asm/mach/time.h>
  40
  41 enum ixp4xx_irq_type {
  42         IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
  43 };
  44 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
  45
  46 /*************************************************************************
  47  * GPIO acces functions
  48  *************************************************************************/
  49
  50 /*
  51  * Configure GPIO line for input, interrupt, or output operation
  52  *
  53  * TODO: Enable/disable the irq_desc based on interrupt or output mode.
  54  * TODO: Should these be named ixp4xx_gpio_?
  55  */
  56 void gpio_line_config(u8 line, u32 style)
  57 {
  58         static const int gpio2irq[] = {
  59                 6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29
  60         };
  61         u32 enable;
  62         volatile u32 *int_reg;
  63         u32 int_style;
  64         enum ixp4xx_irq_type irq_type;
  65
  66         enable = *IXP4XX_GPIO_GPOER;
  67
  68         if (style & IXP4XX_GPIO_OUT) {
  69                 enable &= ~((1) << line);
  70         } else if (style & IXP4XX_GPIO_IN) {
  71                 enable |= ((1) << line);
  72
  73                 switch (style & IXP4XX_GPIO_INTSTYLE_MASK)
  74                 {
  75                 case (IXP4XX_GPIO_ACTIVE_HIGH):
  76                         int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
  77                         irq_type = IXP4XX_IRQ_LEVEL;
  78                         break;
  79                 case (IXP4XX_GPIO_ACTIVE_LOW):
  80                         int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
  81                         irq_type = IXP4XX_IRQ_LEVEL;
  82                         break;
  83                 case (IXP4XX_GPIO_RISING_EDGE):
  84                         int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
  85                         irq_type = IXP4XX_IRQ_EDGE;
  86                         break;
  87                 case (IXP4XX_GPIO_FALLING_EDGE):
  88                         int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
  89                         irq_type = IXP4XX_IRQ_EDGE;
  90                         break;
  91                 case (IXP4XX_GPIO_TRANSITIONAL):
  92                         int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
  93                         irq_type = IXP4XX_IRQ_EDGE;
  94                         break;
  95                 default:
  96                         int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
  97                         irq_type = IXP4XX_IRQ_LEVEL;
  98                         break;
  99                 }
 100
 101                 if (style & IXP4XX_GPIO_INTSTYLE_MASK)
 102                         ixp4xx_config_irq(gpio2irq[line], irq_type);
 103
 104                 if (line >= 8) {        /* pins 8-15 */
 105                         line -= 8;
 106                         int_reg = IXP4XX_GPIO_GPIT2R;
 107                 }
 108                 else {                  /* pins 0-7 */
 109                         int_reg = IXP4XX_GPIO_GPIT1R;
 110                 }
 111
 112                 /* Clear the style for the appropriate pin */
 113                 *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
 114                                 (line * IXP4XX_GPIO_STYLE_SIZE));
 115
 116                 /* Set the new style */
 117                 *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
 118         }
 119
 120         *IXP4XX_GPIO_GPOER = enable;
 121 }
 122
 123 EXPORT_SYMBOL(gpio_line_config);
 124
 125 /*************************************************************************
 126  * IXP4xx chipset I/O mapping
 127  *************************************************************************/
 128 static struct map_desc ixp4xx_io_desc[] __initdata = {
 129         {       /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
 130                 .virtual        = IXP4XX_PERIPHERAL_BASE_VIRT,
 131                 .physical       = IXP4XX_PERIPHERAL_BASE_PHYS,
 132                 .length         = IXP4XX_PERIPHERAL_REGION_SIZE,
 133                 .type           = MT_DEVICE
 134         }, {    /* Expansion Bus Config Registers */
 135                 .virtual        = IXP4XX_EXP_CFG_BASE_VIRT,
 136                 .physical       = IXP4XX_EXP_CFG_BASE_PHYS,
 137                 .length         = IXP4XX_EXP_CFG_REGION_SIZE,
 138                 .type           = MT_DEVICE
 139         }, {    /* PCI Registers */
 140                 .virtual        = IXP4XX_PCI_CFG_BASE_VIRT,
 141                 .physical       = IXP4XX_PCI_CFG_BASE_PHYS,
 142                 .length         = IXP4XX_PCI_CFG_REGION_SIZE,
 143                 .type           = MT_DEVICE
 144         }
 145 };
 146
 147 void __init ixp4xx_map_io(void)
 148 {
 149         iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
 150 }
 151
 152
 153 /*************************************************************************
 154  * IXP4xx chipset IRQ handling
 155  *
 156  * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
 157  *       (be it PCI or something else) configures that GPIO line
 158  *       as an IRQ.
 159  **************************************************************************/
 160 static void ixp4xx_irq_mask(unsigned int irq)
 161 {
 162         if (cpu_is_ixp46x() && irq >= 32)
 163                 *IXP4XX_ICMR2 &= ~(1 << (irq - 32));
 164         else
 165                 *IXP4XX_ICMR &= ~(1 << irq);
 166 }
 167
 168 static void ixp4xx_irq_unmask(unsigned int irq)
 169 {
 170         if (cpu_is_ixp46x() && irq >= 32)
 171                 *IXP4XX_ICMR2 |= (1 << (irq - 32));
 172         else
 173                 *IXP4XX_ICMR |= (1 << irq);
 174 }
 175
 176 static void ixp4xx_irq_ack(unsigned int irq)
 177 {
 178         static int irq2gpio[32] = {
 179                 -1, -1, -1, -1, -1, -1,  0,  1,
 180                 -1, -1, -1, -1, -1, -1, -1, -1,
 181                 -1, -1, -1,  2,  3,  4,  5,  6,
 182                  7,  8,  9, 10, 11, 12, -1, -1,
 183         };
 184         int line = (irq < 32) ? irq2gpio[irq] : -1;
 185
 186         if (line >= 0)
 187                 gpio_line_isr_clear(line);
 188 }
 189
 190 /*
 191  * Level triggered interrupts on GPIO lines can only be cleared when the
 192  * interrupt condition disappears.
 193  */
 194 static void ixp4xx_irq_level_unmask(unsigned int irq)
 195 {
 196         ixp4xx_irq_ack(irq);
 197         ixp4xx_irq_unmask(irq);
 198 }
 199
 200 static struct irqchip ixp4xx_irq_level_chip = {
 201         .ack    = ixp4xx_irq_mask,
 202         .mask   = ixp4xx_irq_mask,
 203         .unmask = ixp4xx_irq_level_unmask,
 204 };
 205
 206 static struct irqchip ixp4xx_irq_edge_chip = {
 207         .ack    = ixp4xx_irq_ack,
 208         .mask   = ixp4xx_irq_mask,
 209         .unmask = ixp4xx_irq_unmask,
 210 };
 211
 212 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
 213 {
 214         switch (type) {
 215         case IXP4XX_IRQ_LEVEL:
 216                 set_irq_chip(irq, &ixp4xx_irq_level_chip);
 217                 set_irq_handler(irq, do_level_IRQ);
 218                 break;
 219         case IXP4XX_IRQ_EDGE:
 220                 set_irq_chip(irq, &ixp4xx_irq_edge_chip);
 221                 set_irq_handler(irq, do_edge_IRQ);
 222                 break;
 223         }
 224         set_irq_flags(irq, IRQF_VALID);
 225 }
 226
 227 void __init ixp4xx_init_irq(void)
 228 {
 229         int i = 0;
 230
 231         /* Route all sources to IRQ instead of FIQ */
 232         *IXP4XX_ICLR = 0x0;
 233
 234         /* Disable all interrupt */
 235         *IXP4XX_ICMR = 0x0;
 236
 237         if (cpu_is_ixp46x()) {
 238                 /* Route upper 32 sources to IRQ instead of FIQ */
 239                 *IXP4XX_ICLR2 = 0x00;
 240
 241                 /* Disable upper 32 interrupts */
 242                 *IXP4XX_ICMR2 = 0x00;
 243         }
 244
 245         /* Default to all level triggered */
 246         for(i = 0; i < NR_IRQS; i++)
 247                 ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL);
 248 }
 249
 250
 251 /*************************************************************************
 252  * IXP4xx timer tick
 253  * We use OS timer1 on the CPU for the timer tick and the timestamp
 254  * counter as a source of real clock ticks to account for missed jiffies.
 255  *************************************************************************/
 256
 257 static unsigned volatile last_jiffy_time;
 258
 259 #define CLOCK_TICKS_PER_USEC    ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
 260
 261 /* IRQs are disabled before entering here from do_gettimeofday() */
 262 static unsigned long ixp4xx_gettimeoffset(void)
 263 {
 264         u32 elapsed;
 265
 266         elapsed = *IXP4XX_OSTS - last_jiffy_time;
 267
 268         return elapsed / CLOCK_TICKS_PER_USEC;
 269 }
 270
 271 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 272 {
 273         write_seqlock(&xtime_lock);
 274
 275         /* Clear Pending Interrupt by writing '1' to it */
 276         *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
 277
 278         /*
 279          * Catch up with the real idea of time
 280          */
 281         while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
 282                 timer_tick(regs);
 283                 last_jiffy_time += LATCH;
 284         }
 285
 286         write_sequnlock(&xtime_lock);
 287
 288         return IRQ_HANDLED;
 289 }
 290
 291 static struct irqaction ixp4xx_timer_irq = {
 292         .name           = "IXP4xx Timer Tick",
 293         .flags          = SA_INTERRUPT,
 294         .handler        = ixp4xx_timer_interrupt
 295 };
 296
 297 static void __init ixp4xx_timer_init(void)
 298 {
 299         /* Clear Pending Interrupt by writing '1' to it */
 300         *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
 301
 302         /* Setup the Timer counter value */
 303         *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
 304
 305         /* Reset time-stamp counter */
 306         *IXP4XX_OSTS = 0;
 307         last_jiffy_time = 0;
 308
 309         /* Connect the interrupt handler and enable the interrupt */
 310         setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
 311 }
 312
 313 struct sys_timer ixp4xx_timer = {
 314         .init           = ixp4xx_timer_init,
 315         .offset         = ixp4xx_gettimeoffset,
 316 };
 317
 318 static struct resource ixp46x_i2c_resources[] = {
 319         [0] = {
 320                 .start  = 0xc8011000,
 321                 .end    = 0xc801101c,
 322                 .flags  = IORESOURCE_MEM,
 323         },
 324         [1] = {
 325                 .start  = IRQ_IXP4XX_I2C,
 326                 .end    = IRQ_IXP4XX_I2C,
 327                 .flags  = IORESOURCE_IRQ
 328         }
 329 };
 330
 331 /*
 332  * I2C controller. The IXP46x uses the same block as the IOP3xx, so
 333  * we just use the same device name.
 334  */
 335 static struct platform_device ixp46x_i2c_controller = {
 336         .name           = "IOP3xx-I2C",
 337         .id             = 0,
 338         .num_resources  = 2,
 339         .resource       = ixp46x_i2c_resources
 340 };
 341
 342 static struct platform_device *ixp46x_devices[] __initdata = {
 343         &ixp46x_i2c_controller
 344 };
 345
 346 void __init ixp4xx_sys_init(void)
 347 {
 348         if (cpu_is_ixp46x()) {
 349                 platform_add_devices(ixp46x_devices,
 350                                 ARRAY_SIZE(ixp46x_devices));
 351         }
 352 }
 353