Linux-2.6.12-rc2
[safe/jmp/linux-2.6] / arch / alpha / kernel / ptrace.c
1 /* ptrace.c */
2 /* By Ross Biro 1/23/92 */
3 /* edited by Linus Torvalds */
4 /* mangled further by Bob Manson (manson@santafe.edu) */
5 /* more mutilation by David Mosberger (davidm@azstarnet.com) */
6
7 #include <linux/kernel.h>
8 #include <linux/sched.h>
9 #include <linux/mm.h>
10 #include <linux/smp.h>
11 #include <linux/smp_lock.h>
12 #include <linux/errno.h>
13 #include <linux/ptrace.h>
14 #include <linux/user.h>
15 #include <linux/slab.h>
16 #include <linux/security.h>
17
18 #include <asm/uaccess.h>
19 #include <asm/pgtable.h>
20 #include <asm/system.h>
21 #include <asm/fpu.h>
22
23 #include "proto.h"
24
25 #define DEBUG   DBG_MEM
26 #undef DEBUG
27
28 #ifdef DEBUG
29 enum {
30         DBG_MEM         = (1<<0),
31         DBG_BPT         = (1<<1),
32         DBG_MEM_ALL     = (1<<2)
33 };
34 #define DBG(fac,args)   {if ((fac) & DEBUG) printk args;}
35 #else
36 #define DBG(fac,args)
37 #endif
38
39 #define BREAKINST       0x00000080      /* call_pal bpt */
40
41 /*
42  * does not yet catch signals sent when the child dies.
43  * in exit.c or in signal.c.
44  */
45
46 /*
47  * Processes always block with the following stack-layout:
48  *
49  *  +================================+ <---- task + 2*PAGE_SIZE
50  *  | PALcode saved frame (ps, pc,   | ^
51  *  | gp, a0, a1, a2)                | |
52  *  +================================+ | struct pt_regs
53  *  |                                | |
54  *  | frame generated by SAVE_ALL    | |
55  *  |                                | v
56  *  +================================+
57  *  |                                | ^
58  *  | frame saved by do_switch_stack | | struct switch_stack
59  *  |                                | v
60  *  +================================+
61  */
62
63 /* 
64  * The following table maps a register index into the stack offset at
65  * which the register is saved.  Register indices are 0-31 for integer
66  * regs, 32-63 for fp regs, and 64 for the pc.  Notice that sp and
67  * zero have no stack-slot and need to be treated specially (see
68  * get_reg/put_reg below).
69  */
70 enum {
71         REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64
72 };
73
74 static int regoff[] = {
75         PT_REG(    r0), PT_REG(    r1), PT_REG(    r2), PT_REG(   r3),
76         PT_REG(    r4), PT_REG(    r5), PT_REG(    r6), PT_REG(   r7),
77         PT_REG(    r8), SW_REG(    r9), SW_REG(   r10), SW_REG(  r11),
78         SW_REG(   r12), SW_REG(   r13), SW_REG(   r14), SW_REG(  r15),
79         PT_REG(   r16), PT_REG(   r17), PT_REG(   r18), PT_REG(  r19),
80         PT_REG(   r20), PT_REG(   r21), PT_REG(   r22), PT_REG(  r23),
81         PT_REG(   r24), PT_REG(   r25), PT_REG(   r26), PT_REG(  r27),
82         PT_REG(   r28), PT_REG(    gp),            -1,             -1,
83         SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
84         SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
85         SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
86         SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
87         SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
88         SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
89         SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
90         SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
91         PT_REG(    pc)
92 };
93
94 static unsigned long zero;
95
96 /*
97  * Get address of register REGNO in task TASK.
98  */
99 static unsigned long *
100 get_reg_addr(struct task_struct * task, unsigned long regno)
101 {
102         unsigned long *addr;
103
104         if (regno == 30) {
105                 addr = &task->thread_info->pcb.usp;
106         } else if (regno == 65) {
107                 addr = &task->thread_info->pcb.unique;
108         } else if (regno == 31 || regno > 65) {
109                 zero = 0;
110                 addr = &zero;
111         } else {
112                 addr = (void *)task->thread_info + regoff[regno];
113         }
114         return addr;
115 }
116
117 /*
118  * Get contents of register REGNO in task TASK.
119  */
120 static unsigned long
121 get_reg(struct task_struct * task, unsigned long regno)
122 {
123         /* Special hack for fpcr -- combine hardware and software bits.  */
124         if (regno == 63) {
125                 unsigned long fpcr = *get_reg_addr(task, regno);
126                 unsigned long swcr
127                   = task->thread_info->ieee_state & IEEE_SW_MASK;
128                 swcr = swcr_update_status(swcr, fpcr);
129                 return fpcr | swcr;
130         }
131         return *get_reg_addr(task, regno);
132 }
133
134 /*
135  * Write contents of register REGNO in task TASK.
136  */
137 static int
138 put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
139 {
140         if (regno == 63) {
141                 task->thread_info->ieee_state
142                   = ((task->thread_info->ieee_state & ~IEEE_SW_MASK)
143                      | (data & IEEE_SW_MASK));
144                 data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data);
145         }
146         *get_reg_addr(task, regno) = data;
147         return 0;
148 }
149
150 static inline int
151 read_int(struct task_struct *task, unsigned long addr, int * data)
152 {
153         int copied = access_process_vm(task, addr, data, sizeof(int), 0);
154         return (copied == sizeof(int)) ? 0 : -EIO;
155 }
156
157 static inline int
158 write_int(struct task_struct *task, unsigned long addr, int data)
159 {
160         int copied = access_process_vm(task, addr, &data, sizeof(int), 1);
161         return (copied == sizeof(int)) ? 0 : -EIO;
162 }
163
164 /*
165  * Set breakpoint.
166  */
167 int
168 ptrace_set_bpt(struct task_struct * child)
169 {
170         int displ, i, res, reg_b, nsaved = 0;
171         unsigned int insn, op_code;
172         unsigned long pc;
173
174         pc  = get_reg(child, REG_PC);
175         res = read_int(child, pc, (int *) &insn);
176         if (res < 0)
177                 return res;
178
179         op_code = insn >> 26;
180         if (op_code >= 0x30) {
181                 /*
182                  * It's a branch: instead of trying to figure out
183                  * whether the branch will be taken or not, we'll put
184                  * a breakpoint at either location.  This is simpler,
185                  * more reliable, and probably not a whole lot slower
186                  * than the alternative approach of emulating the
187                  * branch (emulation can be tricky for fp branches).
188                  */
189                 displ = ((s32)(insn << 11)) >> 9;
190                 child->thread_info->bpt_addr[nsaved++] = pc + 4;
191                 if (displ)              /* guard against unoptimized code */
192                         child->thread_info->bpt_addr[nsaved++]
193                           = pc + 4 + displ;
194                 DBG(DBG_BPT, ("execing branch\n"));
195         } else if (op_code == 0x1a) {
196                 reg_b = (insn >> 16) & 0x1f;
197                 child->thread_info->bpt_addr[nsaved++] = get_reg(child, reg_b);
198                 DBG(DBG_BPT, ("execing jump\n"));
199         } else {
200                 child->thread_info->bpt_addr[nsaved++] = pc + 4;
201                 DBG(DBG_BPT, ("execing normal insn\n"));
202         }
203
204         /* install breakpoints: */
205         for (i = 0; i < nsaved; ++i) {
206                 res = read_int(child, child->thread_info->bpt_addr[i],
207                                (int *) &insn);
208                 if (res < 0)
209                         return res;
210                 child->thread_info->bpt_insn[i] = insn;
211                 DBG(DBG_BPT, ("    -> next_pc=%lx\n",
212                               child->thread_info->bpt_addr[i]));
213                 res = write_int(child, child->thread_info->bpt_addr[i],
214                                 BREAKINST);
215                 if (res < 0)
216                         return res;
217         }
218         child->thread_info->bpt_nsaved = nsaved;
219         return 0;
220 }
221
222 /*
223  * Ensure no single-step breakpoint is pending.  Returns non-zero
224  * value if child was being single-stepped.
225  */
226 int
227 ptrace_cancel_bpt(struct task_struct * child)
228 {
229         int i, nsaved = child->thread_info->bpt_nsaved;
230
231         child->thread_info->bpt_nsaved = 0;
232
233         if (nsaved > 2) {
234                 printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
235                 nsaved = 2;
236         }
237
238         for (i = 0; i < nsaved; ++i) {
239                 write_int(child, child->thread_info->bpt_addr[i],
240                           child->thread_info->bpt_insn[i]);
241         }
242         return (nsaved != 0);
243 }
244
245 /*
246  * Called by kernel/ptrace.c when detaching..
247  *
248  * Make sure the single step bit is not set.
249  */
250 void ptrace_disable(struct task_struct *child)
251
252         ptrace_cancel_bpt(child);
253 }
254
255 asmlinkage long
256 do_sys_ptrace(long request, long pid, long addr, long data,
257               struct pt_regs *regs)
258 {
259         struct task_struct *child;
260         unsigned long tmp;
261         size_t copied;
262         long ret;
263
264         lock_kernel();
265         DBG(DBG_MEM, ("request=%ld pid=%ld addr=0x%lx data=0x%lx\n",
266                       request, pid, addr, data));
267         ret = -EPERM;
268         if (request == PTRACE_TRACEME) {
269                 /* are we already being traced? */
270                 if (current->ptrace & PT_PTRACED)
271                         goto out_notsk;
272                 ret = security_ptrace(current->parent, current);
273                 if (ret)
274                         goto out_notsk;
275                 /* set the ptrace bit in the process ptrace flags. */
276                 current->ptrace |= PT_PTRACED;
277                 ret = 0;
278                 goto out_notsk;
279         }
280         if (pid == 1)           /* you may not mess with init */
281                 goto out_notsk;
282
283         ret = -ESRCH;
284         read_lock(&tasklist_lock);
285         child = find_task_by_pid(pid);
286         if (child)
287                 get_task_struct(child);
288         read_unlock(&tasklist_lock);
289         if (!child)
290                 goto out_notsk;
291
292         if (request == PTRACE_ATTACH) {
293                 ret = ptrace_attach(child);
294                 goto out;
295         }
296
297         ret = ptrace_check_attach(child, request == PTRACE_KILL);
298         if (ret < 0)
299                 goto out;
300
301         switch (request) {
302         /* When I and D space are separate, these will need to be fixed.  */
303         case PTRACE_PEEKTEXT: /* read word at location addr. */
304         case PTRACE_PEEKDATA:
305                 copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
306                 ret = -EIO;
307                 if (copied != sizeof(tmp))
308                         break;
309                 
310                 regs->r0 = 0;   /* special return: no errors */
311                 ret = tmp;
312                 break;
313
314         /* Read register number ADDR. */
315         case PTRACE_PEEKUSR:
316                 regs->r0 = 0;   /* special return: no errors */
317                 ret = get_reg(child, addr);
318                 DBG(DBG_MEM, ("peek $%ld->%#lx\n", addr, ret));
319                 break;
320
321         /* When I and D space are separate, this will have to be fixed.  */
322         case PTRACE_POKETEXT: /* write the word at location addr. */
323         case PTRACE_POKEDATA:
324                 tmp = data;
325                 copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1);
326                 ret = (copied == sizeof(tmp)) ? 0 : -EIO;
327                 break;
328
329         case PTRACE_POKEUSR: /* write the specified register */
330                 DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data));
331                 ret = put_reg(child, addr, data);
332                 break;
333
334         case PTRACE_SYSCALL:
335                 /* continue and stop at next (return from) syscall */
336         case PTRACE_CONT:    /* restart after signal. */
337                 ret = -EIO;
338                 if ((unsigned long) data > _NSIG)
339                         break;
340                 if (request == PTRACE_SYSCALL)
341                         set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
342                 else
343                         clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
344                 child->exit_code = data;
345                 /* make sure single-step breakpoint is gone. */
346                 ptrace_cancel_bpt(child);
347                 wake_up_process(child);
348                 ret = 0;
349                 break;
350
351         /*
352          * Make the child exit.  Best I can do is send it a sigkill.
353          * perhaps it should be put in the status that it wants to
354          * exit.
355          */
356         case PTRACE_KILL:
357                 ret = 0;
358                 if (child->exit_state == EXIT_ZOMBIE)
359                         break;
360                 child->exit_code = SIGKILL;
361                 /* make sure single-step breakpoint is gone. */
362                 ptrace_cancel_bpt(child);
363                 wake_up_process(child);
364                 goto out;
365
366         case PTRACE_SINGLESTEP:  /* execute single instruction. */
367                 ret = -EIO;
368                 if ((unsigned long) data > _NSIG)
369                         break;
370                 /* Mark single stepping.  */
371                 child->thread_info->bpt_nsaved = -1;
372                 clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
373                 child->exit_code = data;
374                 wake_up_process(child);
375                 /* give it a chance to run. */
376                 ret = 0;
377                 goto out;
378
379         case PTRACE_DETACH:      /* detach a process that was attached. */
380                 ret = ptrace_detach(child, data);
381                 goto out;
382
383         default:
384                 ret = ptrace_request(child, request, addr, data);
385                 goto out;
386         }
387  out:
388         put_task_struct(child);
389  out_notsk:
390         unlock_kernel();
391         return ret;
392 }
393
394 asmlinkage void
395 syscall_trace(void)
396 {
397         if (!test_thread_flag(TIF_SYSCALL_TRACE))
398                 return;
399         if (!(current->ptrace & PT_PTRACED))
400                 return;
401         /* The 0x80 provides a way for the tracing parent to distinguish
402            between a syscall stop and SIGTRAP delivery */
403         ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
404                                  ? 0x80 : 0));
405
406         /*
407          * This isn't the same as continuing with a signal, but it will do
408          * for normal use.  strace only continues with a signal if the
409          * stopping signal is not SIGTRAP.  -brl
410          */
411         if (current->exit_code) {
412                 send_sig(current->exit_code, current, 1);
413                 current->exit_code = 0;
414         }
415 }