Linux-2.6.12-rc2
[safe/jmp/linux-2.6] / arch / alpha / kernel / core_polaris.c
1 /*
2  *      linux/arch/alpha/kernel/core_polaris.c
3  *
4  * POLARIS chip-specific code
5  */
6
7 #define __EXTERN_INLINE inline
8 #include <asm/io.h>
9 #include <asm/core_polaris.h>
10 #undef __EXTERN_INLINE
11
12 #include <linux/types.h>
13 #include <linux/pci.h>
14 #include <linux/sched.h>
15 #include <linux/init.h>
16
17 #include <asm/ptrace.h>
18
19 #include "proto.h"
20 #include "pci_impl.h"
21
22 /*
23  * BIOS32-style PCI interface:
24  */
25
26 #define DEBUG_CONFIG 0
27
28 #if DEBUG_CONFIG
29 # define DBG_CFG(args)  printk args
30 #else
31 # define DBG_CFG(args)
32 #endif
33
34
35 /*
36  * Given a bus, device, and function number, compute resulting
37  * configuration space address.  This is fairly straightforward
38  * on POLARIS, since the chip itself generates Type 0 or Type 1
39  * cycles automatically depending on the bus number (Bus 0 is
40  * hardwired to Type 0, all others are Type 1.  Peer bridges
41  * are not supported).
42  *
43  * All types:
44  *
45  *  3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
46  *  9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
47  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
48  * |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x|
49  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
50  *
51  *      23:16   bus number (8 bits = 128 possible buses)
52  *      15:11   Device number (5 bits)
53  *      10:8    function number
54  *       7:2    register number
55  *  
56  * Notes:
57  *      The function number selects which function of a multi-function device 
58  *      (e.g., scsi and ethernet).
59  * 
60  *      The register selects a DWORD (32 bit) register offset.  Hence it
61  *      doesn't get shifted by 2 bits as we want to "drop" the bottom two
62  *      bits.
63  */
64
65 static int
66 mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
67              unsigned long *pci_addr, u8 *type1)
68 {
69         u8 bus = pbus->number;
70
71         *type1 = (bus == 0) ? 0 : 1;
72         *pci_addr = (bus << 16) | (device_fn << 8) | (where) |
73                     POLARIS_DENSE_CONFIG_BASE;
74
75         DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
76                  " returning address 0x%p\n"
77                  bus, device_fn, where, *pci_addr));
78
79         return 0;
80 }
81
82 static int
83 polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where,
84                     int size, u32 *value)
85 {
86         unsigned long addr;
87         unsigned char type1;
88
89         if (mk_conf_addr(bus, devfn, where, &addr, &type1))
90                 return PCIBIOS_DEVICE_NOT_FOUND;
91
92         switch (size) {
93         case 1:
94                 *value = __kernel_ldbu(*(vucp)addr);
95                 break;
96         case 2:
97                 *value = __kernel_ldwu(*(vusp)addr);
98                 break;
99         case 4:
100                 *value = *(vuip)addr;
101                 break;
102         }
103
104         return PCIBIOS_SUCCESSFUL;
105 }
106
107
108 static int 
109 polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where,
110                      int size, u32 value)
111 {
112         unsigned long addr;
113         unsigned char type1;
114
115         if (mk_conf_addr(bus, devfn, where, &addr, &type1))
116                 return PCIBIOS_DEVICE_NOT_FOUND;
117
118         switch (size) {
119         case 1:
120                 __kernel_stb(value, *(vucp)addr);
121                 mb();
122                 __kernel_ldbu(*(vucp)addr);
123                 break;
124         case 2:
125                 __kernel_stw(value, *(vusp)addr);
126                 mb();
127                 __kernel_ldwu(*(vusp)addr);
128                 break;
129         case 4:
130                 *(vuip)addr = value;
131                 mb();
132                 *(vuip)addr;
133                 break;
134         }
135
136         return PCIBIOS_SUCCESSFUL;
137 }
138
139 struct pci_ops polaris_pci_ops = 
140 {
141         .read =         polaris_read_config,
142         .write =        polaris_write_config,
143 };
144 \f
145 void __init
146 polaris_init_arch(void)
147 {
148         struct pci_controller *hose;
149
150         /* May need to initialize error reporting (see PCICTL0/1), but
151          * for now assume that the firmware has done the right thing
152          * already.
153          */
154 #if 0
155         printk("polaris_init_arch(): trusting firmware for setup\n");
156 #endif
157
158         /*
159          * Create our single hose.
160          */
161
162         pci_isa_hose = hose = alloc_pci_controller();
163         hose->io_space = &ioport_resource;
164         hose->mem_space = &iomem_resource;
165         hose->index = 0;
166
167         hose->sparse_mem_base = 0;
168         hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR;
169         hose->sparse_io_base = 0;
170         hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR;
171
172         hose->sg_isa = hose->sg_pci = NULL;
173
174         /* The I/O window is fixed at 2G @ 2G.  */
175         __direct_map_base = 0x80000000;
176         __direct_map_size = 0x80000000;
177 }
178
179 static inline void
180 polaris_pci_clr_err(void)
181 {
182         *(vusp)POLARIS_W_STATUS;
183         /* Write 1's to settable bits to clear errors */
184         *(vusp)POLARIS_W_STATUS = 0x7800;
185         mb();
186         *(vusp)POLARIS_W_STATUS;
187 }
188
189 void
190 polaris_machine_check(unsigned long vector, unsigned long la_ptr,
191                       struct pt_regs * regs)
192 {
193         /* Clear the error before any reporting.  */
194         mb();
195         mb();
196         draina();
197         polaris_pci_clr_err();
198         wrmces(0x7);
199         mb();
200
201         process_mcheck_info(vector, la_ptr, regs, "POLARIS",
202                             mcheck_expected(0));
203 }