From e2aed29f29d0d289df3b0b627b122832d4dc80fe Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 26 Feb 2010 14:15:00 -0500 Subject: [PATCH] [SCSI] lpfc 8.3.10: Added management for LP21000 through BSG. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 6 + drivers/scsi/lpfc/lpfc_bsg.c | 332 ++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_bsg.h | 12 ++ drivers/scsi/lpfc/lpfc_init.c | 8 + 4 files changed, 358 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 4d45e69..565e16d 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -37,6 +37,9 @@ struct lpfc_sli2_slim; the NameServer before giving up. */ #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */ #define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */ +#define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi + cmnd for menlo needs nearly twice as for firmware + downloads using bsg */ #define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */ #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */ #define LPFC_MAX_PROT_SG_SEG_CNT 4096 /* prot sg element count per scsi cmd*/ @@ -806,6 +809,9 @@ struct lpfc_hba { struct list_head ct_ev_waiters; struct unsol_rcv_ct_ctx ct_ctx[64]; uint32_t ctx_idx; + + uint8_t menlo_flag; /* menlo generic flags */ +#define HBA_MENLO_SUPPORT 0x1 /* HBA supports menlo commands */ }; static inline struct Scsi_Host * diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index f3f1bf1..692c29f 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -83,15 +83,28 @@ struct lpfc_bsg_mbox { struct fc_bsg_job *set_job; }; +#define MENLO_DID 0x0000FC0E + +struct lpfc_bsg_menlo { + struct lpfc_iocbq *cmdiocbq; + struct lpfc_iocbq *rspiocbq; + struct lpfc_dmabuf *bmp; + + /* job waiting for this iocb to finish */ + struct fc_bsg_job *set_job; +}; + #define TYPE_EVT 1 #define TYPE_IOCB 2 #define TYPE_MBOX 3 +#define TYPE_MENLO 4 struct bsg_job_data { uint32_t type; union { struct lpfc_bsg_event *evt; struct lpfc_bsg_iocb iocb; struct lpfc_bsg_mbox mbox; + struct lpfc_bsg_menlo menlo; } context_un; }; @@ -2456,6 +2469,18 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, case MBX_PORT_IOV_CONTROL: break; case MBX_SET_VARIABLE: + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "1226 mbox: set_variable 0x%x, 0x%x\n", + mb->un.varWords[0], + mb->un.varWords[1]); + if ((mb->un.varWords[0] == SETVAR_MLOMNT) + && (mb->un.varWords[1] == 1)) { + phba->wait_4_mlo_maint_flg = 1; + } else if (mb->un.varWords[0] == SETVAR_MLORST) { + phba->link_flag &= ~LS_LOOPBACK_MODE; + phba->fc_topology = TOPOLOGY_PT_PT; + } + break; case MBX_RUN_BIU_DIAG64: case MBX_READ_EVENT_LOG: case MBX_READ_SPARM64: @@ -2638,6 +2663,297 @@ job_error: } /** + * lpfc_bsg_menlo_cmd_cmp - lpfc_menlo_cmd completion handler + * @phba: Pointer to HBA context object. + * @cmdiocbq: Pointer to command iocb. + * @rspiocbq: Pointer to response iocb. + * + * This function is the completion handler for iocbs issued using + * lpfc_menlo_cmd function. This function is called by the + * ring event handler function without any lock held. This function + * can be called from both worker thread context and interrupt + * context. This function also can be called from another thread which + * cleans up the SLI layer objects. + * This function copies the contents of the response iocb to the + * response iocb memory object provided by the caller of + * lpfc_sli_issue_iocb_wait and then wakes up the thread which + * sleeps for the iocb completion. + **/ +static void +lpfc_bsg_menlo_cmd_cmp(struct lpfc_hba *phba, + struct lpfc_iocbq *cmdiocbq, + struct lpfc_iocbq *rspiocbq) +{ + struct bsg_job_data *dd_data; + struct fc_bsg_job *job; + IOCB_t *rsp; + struct lpfc_dmabuf *bmp; + struct lpfc_bsg_menlo *menlo; + unsigned long flags; + struct menlo_response *menlo_resp; + int rc = 0; + + spin_lock_irqsave(&phba->ct_ev_lock, flags); + dd_data = cmdiocbq->context1; + if (!dd_data) { + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + return; + } + + menlo = &dd_data->context_un.menlo; + job = menlo->set_job; + job->dd_data = NULL; /* so timeout handler does not reply */ + + spin_lock_irqsave(&phba->hbalock, flags); + cmdiocbq->iocb_flag |= LPFC_IO_WAKE; + if (cmdiocbq->context2 && rspiocbq) + memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb, + &rspiocbq->iocb, sizeof(IOCB_t)); + spin_unlock_irqrestore(&phba->hbalock, flags); + + bmp = menlo->bmp; + rspiocbq = menlo->rspiocbq; + rsp = &rspiocbq->iocb; + + pci_unmap_sg(phba->pcidev, job->request_payload.sg_list, + job->request_payload.sg_cnt, DMA_TO_DEVICE); + pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list, + job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + + /* always return the xri, this would be used in the case + * of a menlo download to allow the data to be sent as a continuation + * of the exchange. + */ + menlo_resp = (struct menlo_response *) + job->reply->reply_data.vendor_reply.vendor_rsp; + menlo_resp->xri = rsp->ulpContext; + if (rsp->ulpStatus) { + if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) { + switch (rsp->un.ulpWord[4] & 0xff) { + case IOERR_SEQUENCE_TIMEOUT: + rc = -ETIMEDOUT; + break; + case IOERR_INVALID_RPI: + rc = -EFAULT; + break; + default: + rc = -EACCES; + break; + } + } else + rc = -EACCES; + } else + job->reply->reply_payload_rcv_len = + rsp->un.genreq64.bdl.bdeSize; + + lpfc_mbuf_free(phba, bmp->virt, bmp->phys); + lpfc_sli_release_iocbq(phba, rspiocbq); + lpfc_sli_release_iocbq(phba, cmdiocbq); + kfree(bmp); + kfree(dd_data); + /* make error code available to userspace */ + job->reply->result = rc; + /* complete the job back to userspace */ + job->job_done(job); + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + return; +} + +/** + * lpfc_menlo_cmd - send an ioctl for menlo hardware + * @job: fc_bsg_job to handle + * + * This function issues a gen request 64 CR ioctl for all menlo cmd requests, + * all the command completions will return the xri for the command. + * For menlo data requests a gen request 64 CX is used to continue the exchange + * supplied in the menlo request header xri field. + **/ +static int +lpfc_menlo_cmd(struct fc_bsg_job *job) +{ + struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct lpfc_iocbq *cmdiocbq, *rspiocbq; + IOCB_t *cmd, *rsp; + int rc = 0; + struct menlo_command *menlo_cmd; + struct menlo_response *menlo_resp; + struct lpfc_dmabuf *bmp = NULL; + int request_nseg; + int reply_nseg; + struct scatterlist *sgel = NULL; + int numbde; + dma_addr_t busaddr; + struct bsg_job_data *dd_data; + struct ulp_bde64 *bpl = NULL; + + /* in case no data is returned return just the return code */ + job->reply->reply_payload_rcv_len = 0; + + if (job->request_len < + sizeof(struct fc_bsg_request) + + sizeof(struct menlo_command)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "2784 Received MENLO_CMD request below " + "minimum size\n"); + rc = -ERANGE; + goto no_dd_data; + } + + if (job->reply_len < + sizeof(struct fc_bsg_request) + sizeof(struct menlo_response)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "2785 Received MENLO_CMD reply below " + "minimum size\n"); + rc = -ERANGE; + goto no_dd_data; + } + + if (!(phba->menlo_flag & HBA_MENLO_SUPPORT)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "2786 Adapter does not support menlo " + "commands\n"); + rc = -EPERM; + goto no_dd_data; + } + + menlo_cmd = (struct menlo_command *) + job->request->rqst_data.h_vendor.vendor_cmd; + + menlo_resp = (struct menlo_response *) + job->reply->reply_data.vendor_reply.vendor_rsp; + + /* allocate our bsg tracking structure */ + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "2787 Failed allocation of dd_data\n"); + rc = -ENOMEM; + goto no_dd_data; + } + + bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!bmp) { + rc = -ENOMEM; + goto free_dd; + } + + cmdiocbq = lpfc_sli_get_iocbq(phba); + if (!cmdiocbq) { + rc = -ENOMEM; + goto free_bmp; + } + + rspiocbq = lpfc_sli_get_iocbq(phba); + if (!rspiocbq) { + rc = -ENOMEM; + goto free_cmdiocbq; + } + + rsp = &rspiocbq->iocb; + + bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys); + if (!bmp->virt) { + rc = -ENOMEM; + goto free_rspiocbq; + } + + INIT_LIST_HEAD(&bmp->list); + bpl = (struct ulp_bde64 *) bmp->virt; + request_nseg = pci_map_sg(phba->pcidev, job->request_payload.sg_list, + job->request_payload.sg_cnt, DMA_TO_DEVICE); + for_each_sg(job->request_payload.sg_list, sgel, request_nseg, numbde) { + busaddr = sg_dma_address(sgel); + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bpl->tus.f.bdeSize = sg_dma_len(sgel); + bpl->tus.w = cpu_to_le32(bpl->tus.w); + bpl->addrLow = cpu_to_le32(putPaddrLow(busaddr)); + bpl->addrHigh = cpu_to_le32(putPaddrHigh(busaddr)); + bpl++; + } + + reply_nseg = pci_map_sg(phba->pcidev, job->reply_payload.sg_list, + job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + for_each_sg(job->reply_payload.sg_list, sgel, reply_nseg, numbde) { + busaddr = sg_dma_address(sgel); + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; + bpl->tus.f.bdeSize = sg_dma_len(sgel); + bpl->tus.w = cpu_to_le32(bpl->tus.w); + bpl->addrLow = cpu_to_le32(putPaddrLow(busaddr)); + bpl->addrHigh = cpu_to_le32(putPaddrHigh(busaddr)); + bpl++; + } + + cmd = &cmdiocbq->iocb; + cmd->un.genreq64.bdl.ulpIoTag32 = 0; + cmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys); + cmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys); + cmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; + cmd->un.genreq64.bdl.bdeSize = + (request_nseg + reply_nseg) * sizeof(struct ulp_bde64); + cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA); + cmd->un.genreq64.w5.hcsw.Dfctl = 0; + cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CMD; + cmd->un.genreq64.w5.hcsw.Type = MENLO_TRANSPORT_TYPE; /* 0xfe */ + cmd->ulpBdeCount = 1; + cmd->ulpClass = CLASS3; + cmd->ulpOwner = OWN_CHIP; + cmd->ulpLe = 1; /* Limited Edition */ + cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; + cmdiocbq->vport = phba->pport; + /* We want the firmware to timeout before we do */ + cmd->ulpTimeout = MENLO_TIMEOUT - 5; + cmdiocbq->context3 = bmp; + cmdiocbq->context2 = rspiocbq; + cmdiocbq->iocb_cmpl = lpfc_bsg_menlo_cmd_cmp; + cmdiocbq->context1 = dd_data; + cmdiocbq->context2 = rspiocbq; + if (menlo_cmd->cmd == LPFC_BSG_VENDOR_MENLO_CMD) { + cmd->ulpCommand = CMD_GEN_REQUEST64_CR; + cmd->ulpPU = MENLO_PU; /* 3 */ + cmd->un.ulpWord[4] = MENLO_DID; /* 0x0000FC0E */ + cmd->ulpContext = MENLO_CONTEXT; /* 0 */ + } else { + cmd->ulpCommand = CMD_GEN_REQUEST64_CX; + cmd->ulpPU = 1; + cmd->un.ulpWord[4] = 0; + cmd->ulpContext = menlo_cmd->xri; + } + + dd_data->type = TYPE_MENLO; + dd_data->context_un.menlo.cmdiocbq = cmdiocbq; + dd_data->context_un.menlo.rspiocbq = rspiocbq; + dd_data->context_un.menlo.set_job = job; + dd_data->context_un.menlo.bmp = bmp; + + rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, + MENLO_TIMEOUT - 5); + if (rc == IOCB_SUCCESS) + return 0; /* done for now */ + + /* iocb failed so cleanup */ + pci_unmap_sg(phba->pcidev, job->request_payload.sg_list, + job->request_payload.sg_cnt, DMA_TO_DEVICE); + pci_unmap_sg(phba->pcidev, job->reply_payload.sg_list, + job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + + lpfc_mbuf_free(phba, bmp->virt, bmp->phys); + +free_rspiocbq: + lpfc_sli_release_iocbq(phba, rspiocbq); +free_cmdiocbq: + lpfc_sli_release_iocbq(phba, cmdiocbq); +free_bmp: + kfree(bmp); +free_dd: + kfree(dd_data); +no_dd_data: + /* make error code available to userspace */ + job->reply->result = rc; + job->dd_data = NULL; + return rc; +} +/** * lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job * @job: fc_bsg_job to handle **/ @@ -2669,6 +2985,10 @@ lpfc_bsg_hst_vendor(struct fc_bsg_job *job) case LPFC_BSG_VENDOR_MBOX: rc = lpfc_bsg_mbox_cmd(job); break; + case LPFC_BSG_VENDOR_MENLO_CMD: + case LPFC_BSG_VENDOR_MENLO_DATA: + rc = lpfc_menlo_cmd(job); + break; default: rc = -EINVAL; job->reply->reply_payload_rcv_len = 0; @@ -2728,6 +3048,7 @@ lpfc_bsg_timeout(struct fc_bsg_job *job) struct lpfc_bsg_event *evt; struct lpfc_bsg_iocb *iocb; struct lpfc_bsg_mbox *mbox; + struct lpfc_bsg_menlo *menlo; struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; struct bsg_job_data *dd_data; unsigned long flags; @@ -2775,6 +3096,17 @@ lpfc_bsg_timeout(struct fc_bsg_job *job) spin_unlock_irqrestore(&phba->ct_ev_lock, flags); job->job_done(job); break; + case TYPE_MENLO: + menlo = &dd_data->context_un.menlo; + cmdiocb = menlo->cmdiocbq; + /* hint to completion handler that the job timed out */ + job->reply->result = -EAGAIN; + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + /* this will call our completion handler */ + spin_lock_irq(&phba->hbalock); + lpfc_sli_issue_abort_iotag(phba, pring, cmdiocb); + spin_unlock_irq(&phba->hbalock); + break; default: spin_unlock_irqrestore(&phba->ct_ev_lock, flags); break; diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index 6c8f87e..5bc6308 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -31,6 +31,8 @@ #define LPFC_BSG_VENDOR_DIAG_TEST 5 #define LPFC_BSG_VENDOR_GET_MGMT_REV 6 #define LPFC_BSG_VENDOR_MBOX 7 +#define LPFC_BSG_VENDOR_MENLO_CMD 8 +#define LPFC_BSG_VENDOR_MENLO_DATA 9 struct set_ct_event { uint32_t command; @@ -96,3 +98,13 @@ struct dfc_mbox_req { uint8_t mbOffset; }; +/* Used for menlo command or menlo data. The xri is only used for menlo data */ +struct menlo_command { + uint32_t cmd; + uint32_t xri; +}; + +struct menlo_response { + uint32_t xri; /* return the xri of the iocb exchange */ +}; + diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b7889c5..88e02a4 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2597,6 +2597,14 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) init_timer(&vport->els_tmofunc); vport->els_tmofunc.function = lpfc_els_timeout; vport->els_tmofunc.data = (unsigned long)vport; + if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) { + phba->menlo_flag |= HBA_MENLO_SUPPORT; + /* check for menlo minimum sg count */ + if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT) { + phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT; + shost->sg_tablesize = phba->cfg_sg_seg_cnt; + } + } error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev); if (error) -- 1.8.2.3