From 9ab921201444e4dcfd0c14ac4cc6758e32059dae Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Fri, 6 Mar 2009 11:01:23 +0800 Subject: [PATCH] cpm_uart: fix non-console port startup bug After UART interrupt handler is installed and rx is enabled, if an rx interrupt comes before hardware init, rx->cur will be updated. Then the hardware init will reset BD and make rx->cur out of sync, move the hardware init code before request_irq. Signed-off-by: Xiaotian Feng Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart_core.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index bde4b4b..5c6ef51 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -406,6 +406,18 @@ static int cpm_uart_startup(struct uart_port *port) pr_debug("CPM uart[%d]:startup\n", port->line); + /* If the port is not the console, make sure rx is disabled. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Disable UART rx */ + if (IS_SMC(pinfo)) { + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + } else { + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + } + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } /* Install interrupt handler. */ retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); if (retval) @@ -420,8 +432,6 @@ static int cpm_uart_startup(struct uart_port *port) setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); } - if (!(pinfo->flags & FLAG_CONSOLE)) - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); return 0; } -- 1.8.2.3