From 8d6cdd235d19c3bb1f86f40bf0305049c1a61955 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Apr 2006 13:19:24 -0300 Subject: [PATCH] V4L/DVB (3811): Cxusb: lgh064f: set auxiliary byte in pll_set This changeset removes pll_init, and instead sets the tuner auxiliary byte in pll_set. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cxusb.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 1f0d3e9..5151fb4 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -322,6 +322,36 @@ static int cxusb_mt352_demod_init(struct dvb_frontend* fe) return 0; } +static int cxusb_lgh064f_pll_set_i2c(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_device *d = fe->dvb->priv; + int ret = 0; + u8 b[5]; + struct i2c_msg msg = { .addr = d->pll_addr, .flags = 0, + .buf = &b[1], .len = 4 }; + + dvb_usb_pll_set(fe,fep,b); + + if (i2c_transfer (&d->i2c_adap, &msg, 1) != 1) { + err("tuner i2c write failed for pll_set."); + ret = -EREMOTEIO; + } + msleep(1); + + /* Set the Auxiliary Byte. */ + b[3] &= ~0x20; + b[3] |= 0x18; + b[4] = 0x50; + if (i2c_transfer(&d->i2c_adap, &msg, 1) != 1) { + err("tuner i2c write failed writing auxiliary byte."); + ret = -EREMOTEIO; + } + msleep(1); + + return ret; +} + static struct cx22702_config cxusb_cx22702_config = { .demod_address = 0x63, @@ -334,7 +364,7 @@ static struct cx22702_config cxusb_cx22702_config = { static struct lgdt330x_config cxusb_lgdt3303_config = { .demod_address = 0x0e, .demod_chip = LGDT3303, - .pll_set = dvb_usb_pll_set_i2c, + .pll_set = cxusb_lgh064f_pll_set_i2c, }; static struct mt352_config cxusb_dee1601_config = { @@ -362,11 +392,7 @@ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_device *d) static int cxusb_lgh064f_tuner_attach(struct dvb_usb_device *d) { - u8 bpll[4] = { 0x00, 0x00, 0x18, 0x50 }; - /* bpll[2] : unset bit 3, set bits 4&5 - bpll[3] : 0x50 - digital, 0x20 - analog */ d->pll_addr = 0x61; - memcpy(d->pll_init, bpll, 4); d->pll_desc = &dvb_pll_tdvs_tua6034; return 0; } -- 1.8.2.3