From 862bc36f682b25dd97833f702b4f8c97661b8811 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:12:01 +0200 Subject: [PATCH] [PATCH] hwmon: Drop useless w83627hf initialization step Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627hf.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 494274d..4827081 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -201,7 +201,6 @@ superio_exit(void) #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B -#define W83627HF_REG_PWMCLK12 0x5C #define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ #define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ @@ -1373,12 +1372,6 @@ static void w83627hf_init_client(struct i2c_client *client) } } - if (type == w83627hf) { - /* enable PWM2 control (can't hurt since PWM reg - should have been reset to 0xff) */ - w83627hf_write_value(client, W83627HF_REG_PWMCLK12, - 0x19); - } /* enable comparator mode for temp2 and temp3 so alarm indication will work correctly */ i = w83627hf_read_value(client, W83781D_REG_IRQ); -- 1.8.2.3