From 1a51e3a0aed18767cf2762e95456ecfeb0bca5e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Jan 2009 20:41:35 +0900 Subject: [PATCH] x86: fold pda into percpu area on SMP [ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: Tejun Heo Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 8 +++ arch/x86/include/asm/smp.h | 2 - arch/x86/kernel/asm-offsets_64.c | 1 + arch/x86/kernel/cpu/common.c | 6 +-- arch/x86/kernel/head64.c | 8 ++- arch/x86/kernel/head_64.S | 15 ++++-- arch/x86/kernel/setup_percpu.c | 107 ++++++++++++++++---------------------- arch/x86/kernel/smpboot.c | 60 +-------------------- arch/x86/kernel/vmlinux_64.lds.S | 6 ++- arch/x86/xen/smp.c | 10 ---- include/asm-generic/vmlinux.lds.h | 25 ++++++++- 11 files changed, 104 insertions(+), 144 deletions(-) diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index df644f3..0ed77cf 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -1,6 +1,14 @@ #ifndef _ASM_X86_PERCPU_H #define _ASM_X86_PERCPU_H +#ifndef __ASSEMBLY__ +#ifdef CONFIG_X86_64 +extern void load_pda_offset(int cpu); +#else +static inline void load_pda_offset(int cpu) { } +#endif +#endif + #ifdef CONFIG_X86_64 #include diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index a8cea7b..1274154 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -19,8 +19,6 @@ #include #include -extern int __cpuinit get_local_pda(int cpu); - extern int smp_num_siblings; extern unsigned int num_processors; diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index 1d41d3f..f8d1b04 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -56,6 +56,7 @@ int main(void) ENTRY(cpunumber); ENTRY(irqstackptr); ENTRY(data_offset); + DEFINE(pda_size, sizeof(struct x8664_pda)); BLANK(); #undef ENTRY #ifdef CONFIG_PARAVIRT diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c116c59..7041acd 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -893,10 +893,8 @@ void __cpuinit pda_init(int cpu) /* Setup up data that may be needed in __get_free_pages early */ loadsegment(fs, 0); loadsegment(gs, 0); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); + + load_pda_offset(cpu); pda->cpunumber = cpu; pda->irqcount = -1; diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 462d0be..1a31129 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -26,12 +26,18 @@ #include #include -/* boot cpu pda, referenced by head_64.S to initialize %gs for boot CPU */ +#ifndef CONFIG_SMP +/* boot cpu pda, referenced by head_64.S to initialize %gs on UP */ struct x8664_pda _boot_cpu_pda; +#endif void __init x86_64_init_pda(void) { +#ifdef CONFIG_SMP + cpu_pda(0) = (void *)__per_cpu_load; +#else cpu_pda(0) = &_boot_cpu_pda; +#endif cpu_pda(0)->data_offset = (unsigned long)(__per_cpu_load - __per_cpu_start); pda_init(0); diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 2f0ab00..7a995d0 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -245,10 +245,13 @@ ENTRY(secondary_startup_64) /* Set up %gs. * - * %gs should point to the pda. For initial boot, make %gs point - * to the _boot_cpu_pda in data section. For a secondary CPU, - * initial_gs should be set to its pda address before the CPU runs - * this code. + * On SMP, %gs should point to the per-cpu area. For initial + * boot, make %gs point to the init data section. For a + * secondary CPU,initial_gs should be set to its pda address + * before the CPU runs this code. + * + * On UP, initial_gs points to _boot_cpu_pda and doesn't + * change. */ movl $MSR_GS_BASE,%ecx movq initial_gs(%rip),%rax @@ -278,7 +281,11 @@ ENTRY(secondary_startup_64) ENTRY(initial_code) .quad x86_64_start_kernel ENTRY(initial_gs) +#ifdef CONFIG_SMP + .quad __per_cpu_load +#else .quad _boot_cpu_pda +#endif __FINITDATA ENTRY(stack_start) diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 73ab01b..63d4628 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #ifdef CONFIG_DEBUG_PER_CPU_MAPS @@ -65,6 +66,36 @@ static void __init setup_node_to_cpumask_map(void); static inline void setup_node_to_cpumask_map(void) { } #endif +#ifdef CONFIG_X86_64 +void __cpuinit load_pda_offset(int cpu) +{ + /* Memory clobbers used to order pda/percpu accesses */ + mb(); + wrmsrl(MSR_GS_BASE, cpu_pda(cpu)); + mb(); +} + +#endif /* CONFIG_SMP && CONFIG_X86_64 */ + +#ifdef CONFIG_X86_64 + +/* correctly size the local cpu masks */ +static void setup_cpu_local_masks(void) +{ + alloc_bootmem_cpumask_var(&cpu_initialized_mask); + alloc_bootmem_cpumask_var(&cpu_callin_mask); + alloc_bootmem_cpumask_var(&cpu_callout_mask); + alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); +} + +#else /* CONFIG_X86_32 */ + +static inline void setup_cpu_local_masks(void) +{ +} + +#endif /* CONFIG_X86_32 */ + #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA /* * Copy data used in early init routines from the initial arrays to the @@ -101,63 +132,7 @@ static void __init setup_per_cpu_maps(void) */ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; EXPORT_SYMBOL(__per_cpu_offset); -static inline void setup_cpu_pda_map(void) { } - -#elif !defined(CONFIG_SMP) -static inline void setup_cpu_pda_map(void) { } - -#else /* CONFIG_SMP && CONFIG_X86_64 */ - -/* - * Allocate cpu_pda pointer table and array via alloc_bootmem. - */ -static void __init setup_cpu_pda_map(void) -{ - char *pda; - unsigned long size; - int cpu; - - size = roundup(sizeof(struct x8664_pda), cache_line_size()); - - /* allocate cpu_pda array and pointer table */ - { - unsigned long asize = size * (nr_cpu_ids - 1); - - pda = alloc_bootmem(asize); - } - - /* initialize pointer table to static pda's */ - for_each_possible_cpu(cpu) { - if (cpu == 0) { - /* leave boot cpu pda in place */ - continue; - } - cpu_pda(cpu) = (struct x8664_pda *)pda; - cpu_pda(cpu)->in_bootmem = 1; - pda += size; - } -} - -#endif /* CONFIG_SMP && CONFIG_X86_64 */ - -#ifdef CONFIG_X86_64 - -/* correctly size the local cpu masks */ -static void setup_cpu_local_masks(void) -{ - alloc_bootmem_cpumask_var(&cpu_initialized_mask); - alloc_bootmem_cpumask_var(&cpu_callin_mask); - alloc_bootmem_cpumask_var(&cpu_callout_mask); - alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); -} - -#else /* CONFIG_X86_32 */ - -static inline void setup_cpu_local_masks(void) -{ -} - -#endif /* CONFIG_X86_32 */ +#endif /* * Great future plan: @@ -171,9 +146,6 @@ void __init setup_per_cpu_areas(void) int cpu; unsigned long align = 1; - /* Setup cpu_pda map */ - setup_cpu_pda_map(); - /* Copy section for each CPU (we discard the original) */ old_size = PERCPU_ENOUGH_ROOM; align = max_t(unsigned long, PAGE_SIZE, align); @@ -204,8 +176,21 @@ void __init setup_per_cpu_areas(void) cpu, node, __pa(ptr)); } #endif - per_cpu_offset(cpu) = ptr - __per_cpu_start; + memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start); +#ifdef CONFIG_X86_64 + cpu_pda(cpu) = (void *)ptr; + + /* + * CPU0 modified pda in the init data area, reload pda + * offset for CPU0 and clear the area for others. + */ + if (cpu == 0) + load_pda_offset(0); + else + memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu))); +#endif + per_cpu_offset(cpu) = ptr - __per_cpu_start; DBG("PERCPU: cpu %4d %p\n", cpu, ptr); } diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 70d8466..f2f77ca 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -744,52 +744,6 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } -#ifdef CONFIG_X86_64 - -/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */ -static void __ref free_bootmem_pda(struct x8664_pda *oldpda) -{ - if (!after_bootmem) - free_bootmem((unsigned long)oldpda, sizeof(*oldpda)); -} - -/* - * Allocate node local memory for the AP pda. - * - * Must be called after the _cpu_pda pointer table is initialized. - */ -int __cpuinit get_local_pda(int cpu) -{ - struct x8664_pda *oldpda, *newpda; - unsigned long size = sizeof(struct x8664_pda); - int node = cpu_to_node(cpu); - - if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem) - return 0; - - oldpda = cpu_pda(cpu); - newpda = kmalloc_node(size, GFP_ATOMIC, node); - if (!newpda) { - printk(KERN_ERR "Could not allocate node local PDA " - "for CPU %d on node %d\n", cpu, node); - - if (oldpda) - return 0; /* have a usable pda */ - else - return -1; - } - - if (oldpda) { - memcpy(newpda, oldpda, size); - free_bootmem_pda(oldpda); - } - - newpda->in_bootmem = 0; - cpu_pda(cpu) = newpda; - return 0; -} -#endif /* CONFIG_X86_64 */ - static int __cpuinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad @@ -807,16 +761,6 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) }; INIT_WORK(&c_idle.work, do_fork_idle); -#ifdef CONFIG_X86_64 - /* Allocate node local memory for AP pdas */ - if (cpu > 0) { - boot_error = get_local_pda(cpu); - if (boot_error) - goto restore_state; - /* if can't get pda memory, can't start cpu */ - } -#endif - alternatives_smp_switch(1); c_idle.idle = get_idle_for_cpu(cpu); @@ -931,9 +875,7 @@ do_rest: inquire_remote_apic(apicid); } } -#ifdef CONFIG_X86_64 -restore_state: -#endif + if (boot_error) { /* Try to put things back the way they were before ... */ numa_remove_cpu(cpu); /* was set by numa_add_cpu */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index f50280d..962f21f 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -5,6 +5,7 @@ #define LOAD_OFFSET __START_KERNEL_map #include +#include #include #undef i386 /* in case the preprocessor is a 32bit one */ @@ -215,10 +216,11 @@ SECTIONS /* * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the * output PHDR, so the next output section - __data_nosave - should - * switch it back to data.init. + * switch it back to data.init. Also, pda should be at the head of + * percpu area. Preallocate it. */ . = ALIGN(PAGE_SIZE); - PERCPU_VADDR(0, :percpu) + PERCPU_VADDR_PREALLOC(0, :percpu, pda_size) #else PERCPU(PAGE_SIZE) #endif diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index c44e206..83fa423 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -283,16 +283,6 @@ static int __cpuinit xen_cpu_up(unsigned int cpu) struct task_struct *idle = idle_task(cpu); int rc; -#ifdef CONFIG_X86_64 - /* Allocate node local memory for AP pdas */ - WARN_ON(cpu == 0); - if (cpu > 0) { - rc = get_local_pda(cpu); - if (rc) - return rc; - } -#endif - #ifdef CONFIG_X86_32 init_gdt(cpu); per_cpu(current_task, cpu) = idle; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index fc2f55f..e53319c 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -441,9 +441,10 @@ . = __per_cpu_load + SIZEOF(.data.percpu); /** - * PERCPU_VADDR - define output section for percpu area + * PERCPU_VADDR_PREALLOC - define output section for percpu area with prealloc * @vaddr: explicit base address (optional) * @phdr: destination PHDR (optional) + * @prealloc: the size of prealloc area * * Macro which expands to output section for percpu area. If @vaddr * is not blank, it specifies explicit base address and all percpu @@ -455,11 +456,33 @@ * section in the linker script will go there too. @phdr should have * a leading colon. * + * If @prealloc is non-zero, the specified number of bytes will be + * reserved at the start of percpu area. As the prealloc area is + * likely to break alignment, this macro puts areas in increasing + * alignment order. + * * This macro defines three symbols, __per_cpu_load, __per_cpu_start * and __per_cpu_end. The first one is the vaddr of loaded percpu * init data. __per_cpu_start equals @vaddr and __per_cpu_end is the * end offset. */ +#define PERCPU_VADDR_PREALLOC(vaddr, segment, prealloc) \ + PERCPU_PROLOG(vaddr) \ + . += prealloc; \ + *(.data.percpu) \ + *(.data.percpu.shared_aligned) \ + *(.data.percpu.page_aligned) \ + PERCPU_EPILOG(segment) + +/** + * PERCPU_VADDR - define output section for percpu area + * @vaddr: explicit base address (optional) + * @phdr: destination PHDR (optional) + * + * Macro which expands to output section for percpu area. Mostly + * identical to PERCPU_VADDR_PREALLOC(@vaddr, @phdr, 0) other than + * using slighly different layout. + */ #define PERCPU_VADDR(vaddr, phdr) \ PERCPU_PROLOG(vaddr) \ *(.data.percpu.page_aligned) \ -- 1.8.2.3