From: Vitaly Bordug Date: Mon, 2 Oct 2006 18:45:17 +0000 (+0400) Subject: POWERPC: mpc82xx merge: board-specific/platform stuff(resend) X-Git-Tag: v2.6.19-rc1~35^2~6^2 X-Git-Url: http://ftp.safe.ca/?a=commitdiff_plain;h=91bd61099defb28a442db358dd9c1693c6589cee;p=safe%2Fjmp%2Flinux-2.6 POWERPC: mpc82xx merge: board-specific/platform stuff(resend) This intruduces 82xx family in arch/powerpc/platforms, and has all the board-specific code to represent regression-less transaction from ppc. The functionality is apparently the same, including PCI controller. Signed-off-by: Vitaly Bordug --- diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig new file mode 100644 index 0000000..47d841e --- /dev/null +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -0,0 +1,21 @@ +menu "Platform support" + depends on PPC_82xx + +choice + prompt "Machine Type" + default MPC82xx_ADS + +config MPC82xx_ADS + bool "Freescale MPC82xx ADS" + select DEFAULT_UIMAGE + select PQ2ADS + select 8272 + select 8260 + select CPM2 + select FSL_SOC + help + This option enables support for the MPC8272 ADS board + +endchoice + +endmenu diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile new file mode 100644 index 0000000..d9fd4c8 --- /dev/null +++ b/arch/powerpc/platforms/82xx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the PowerPC 82xx linux kernel. +# +obj-$(CONFIG_PPC_82xx) += mpc82xx.o +obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h new file mode 100644 index 0000000..9cd8893 --- /dev/null +++ b/arch/powerpc/platforms/82xx/m82xx_pci.h @@ -0,0 +1,19 @@ +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c new file mode 100644 index 0000000..89d702d --- /dev/null +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -0,0 +1,111 @@ +/* + * MPC82xx setup and early boot code plus other random bits. + * + * Author: Vitaly Bordug + * + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "pq2ads_pd.h" + +static int __init get_freq(char *name, unsigned long *val) +{ + struct device_node *cpu; + unsigned int *fp; + int found = 0; + + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); + + if (cpu) { + fp = (unsigned int *)get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp++; + } + + of_node_put(cpu); + } + + return found; +} + +void __init m82xx_calibrate_decr(void) +{ + ppc_tb_freq = 125000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 4; + ppc_proc_freq = 1000000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); +} + +void mpc82xx_ads_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c new file mode 100644 index 0000000..4276f08 --- /dev/null +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -0,0 +1,661 @@ +/* + * MPC82xx_ads setup and early boot code plus other random bits. + * + * Author: Vitaly Bordug + * m82xx_restart fix by Wade Farnsworth + * + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include <../sysdev/cpm2_pic.h> + +#include "pq2ads_pd.h" + +#ifdef CONFIG_PCI +static uint pci_clk_frq; +static struct { + unsigned long *pci_int_stat_reg; + unsigned long *pci_int_mask_reg; +} pci_regs; + +static unsigned long pci_int_base; +static struct irq_host *pci_pic_host; +static struct device_node *pci_pic_node; +#endif + +static void __init mpc82xx_ads_pic_init(void) +{ + struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2"); + struct resource r; + cpm2_map_t *cpm_reg; + + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + return; + } + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "PIC init: invalid resource\n"); + of_node_put(np); + return; + } + cpm2_pic_init(np); + of_node_put(np); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t)); + cpm_reg->im_intctl.ic_siprr = 0x05309770; + iounmap(cpm_reg); +#ifdef CONFIG_PCI + /* Initialize stuff for the 82xx CPLD IC and install demux */ + m82xx_pci_init_irq(); +#endif +} + +static void init_fcc1_ioports(struct fs_platform_info *fpi) +{ + struct io_port *io; + u32 tempval; + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + struct device_node *np; + struct resource r; + u32 *bcsr; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) { + printk(KERN_INFO "No memory node in device tree\n"); + return; + } + if (of_address_to_resource(np, 1, &r)) { + printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + return; + } + of_node_put(np); + bcsr = ioremap(r.start + 4, sizeof(u32)); + io = &immap->im_ioport; + + /* Enable the PHY */ + clrbits32(bcsr, BCSR1_FETHIEN); + setbits32(bcsr, BCSR1_FETH_RST); + + /* FCC1 pins are on port A/C. */ + /* Configure port A and C pins for FCC1 Ethernet. */ + + tempval = in_be32(&io->iop_pdira); + tempval &= ~PA1_DIRA0; + tempval |= PA1_DIRA1; + out_be32(&io->iop_pdira, tempval); + + tempval = in_be32(&io->iop_psora); + tempval &= ~PA1_PSORA0; + tempval |= PA1_PSORA1; + out_be32(&io->iop_psora, tempval); + + setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1); + + /* Alter clocks */ + tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8); + + clrbits32(&io->iop_psorc, tempval); + clrbits32(&io->iop_pdirc, tempval); + setbits32(&io->iop_pparc, tempval); + + cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX); + + iounmap(bcsr); + iounmap(immap); +} + +static void init_fcc2_ioports(struct fs_platform_info *fpi) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + struct device_node *np; + struct resource r; + u32 *bcsr; + + struct io_port *io; + u32 tempval; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) { + printk(KERN_INFO "No memory node in device tree\n"); + return; + } + if (of_address_to_resource(np, 1, &r)) { + printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + return; + } + of_node_put(np); + io = &immap->im_ioport; + bcsr = ioremap(r.start + 12, sizeof(u32)); + + /* Enable the PHY */ + clrbits32(bcsr, BCSR3_FETHIEN2); + setbits32(bcsr, BCSR3_FETH2_RST); + + /* FCC2 are port B/C. */ + /* Configure port A and C pins for FCC2 Ethernet. */ + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1); + + tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8); + + /* Alter clocks */ + clrbits32(&io->iop_psorc, tempval); + clrbits32(&io->iop_pdirc, tempval); + setbits32(&io->iop_pparc, tempval); + + cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX); + + iounmap(bcsr); + iounmap(immap); +} + +void init_fcc_ioports(struct fs_platform_info *fpi) +{ + int fcc_no = fs_get_fcc_index(fpi->fs_no); + + switch (fcc_no) { + case 0: + init_fcc1_ioports(fpi); + break; + case 1: + init_fcc2_ioports(fpi); + break; + default: + printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n"); + return; + } +} + +static void init_scc1_uart_ioports(struct fs_uart_platform_info *data) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + + /* SCC1 is only on port D */ + setbits32(&immap->im_ioport.iop_ppard, 0x00000003); + clrbits32(&immap->im_ioport.iop_psord, 0x00000001); + setbits32(&immap->im_ioport.iop_psord, 0x00000002); + clrbits32(&immap->im_ioport.iop_pdird, 0x00000001); + setbits32(&immap->im_ioport.iop_pdird, 0x00000002); + + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx))); + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_tx - 1) << (4 - data->clk_tx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_rx - 1) << (4 - data->clk_rx))); + + iounmap(immap); +} + +static void init_scc4_uart_ioports(struct fs_uart_platform_info *data) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + + setbits32(&immap->im_ioport.iop_ppard, 0x00000600); + clrbits32(&immap->im_ioport.iop_psord, 0x00000600); + clrbits32(&immap->im_ioport.iop_pdird, 0x00000200); + setbits32(&immap->im_ioport.iop_pdird, 0x00000400); + + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx))); + clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_tx - 1) << (4 - data->clk_tx))); + setbits32(&immap->im_cpmux.cmx_scr, + ((data->clk_rx - 1) << (4 - data->clk_rx))); + + iounmap(immap); +} + +void init_scc_ioports(struct fs_uart_platform_info *data) +{ + int scc_no = fs_get_scc_index(data->fs_no); + + switch (scc_no) { + case 0: + init_scc1_uart_ioports(data); + data->brg = data->clk_rx; + break; + case 3: + init_scc4_uart_ioports(data); + data->brg = data->clk_rx; + break; + default: + printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + return; + } +} + +void __init m82xx_board_setup(void) +{ + cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t)); + struct device_node *np; + struct resource r; + u32 *bcsr; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) { + printk(KERN_INFO "No memory node in device tree\n"); + return; + } + if (of_address_to_resource(np, 1, &r)) { + printk(KERN_INFO "No memory reg property [1] in devicetree\n"); + return; + } + of_node_put(np); + bcsr = ioremap(r.start + 4, sizeof(u32)); + /* Enable the 2nd UART port */ + clrbits32(bcsr, BCSR1_RS232_EN2); + +#ifdef CONFIG_SERIAL_CPM_SCC1 + clrbits32((u32 *) & immap->im_scc[0].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + clrbits32((u32 *) & immap->im_scc[1].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + clrbits32((u32 *) & immap->im_scc[2].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + clrbits32((u32 *) & immap->im_scc[3].scc_sccm, + UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl, + SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + + iounmap(bcsr); + iounmap(immap); +} + +#ifdef CONFIG_PCI +static void m82xx_pci_mask_irq(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg |= (1 << (31 - bit)); + return; +} + +static void m82xx_pci_unmask_irq(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit)); + return; +} + +static void m82xx_pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg |= (1 << (31 - bit)); + return; +} + +static void m82xx_pci_end_irq(unsigned int irq) +{ + int bit = irq - pci_int_base; + + *pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type m82xx_pci_ic = { + .typename = "MPC82xx ADS PCI", + .name = "MPC82xx ADS PCI", + .enable = m82xx_pci_unmask_irq, + .disable = m82xx_pci_mask_irq, + .ack = m82xx_pci_mask_and_ack, + .end = m82xx_pci_end_irq, + .mask = m82xx_pci_mask_irq, + .mask_ack = m82xx_pci_mask_and_ack, + .unmask = m82xx_pci_unmask_irq, + .eoi = m82xx_pci_end_irq, +}; + +static void +m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for (;;) { + stat = *pci_regs.pci_int_stat_reg; + mask = *pci_regs.pci_int_mask_reg; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(pci_int_base + bit, regs); + } + } +} + +static int pci_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return node == pci_pic_node; +} + +static int pci_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip(virq, &m82xx_pci_ic); + return 0; +} + +static void pci_host_unmap(struct irq_host *h, unsigned int virq) +{ + /* remove chip and handler */ + set_irq_chip(virq, NULL); +} + +static struct irq_host_ops pci_pic_host_ops = { + .match = pci_pic_host_match, + .map = pci_pic_host_map, + .unmap = pci_host_unmap, +}; + +void m82xx_pci_init_irq(void) +{ + int irq; + cpm2_map_t *immap; + struct device_node *np; + struct resource r; + const u32 *regs; + unsigned int size; + const u32 *irq_map; + int i; + unsigned int irq_max, irq_min; + + if ((np = of_find_node_by_type(NULL, "soc")) == NULL) { + printk(KERN_INFO "No SOC node in device tree\n"); + return; + } + memset(&r, 0, sizeof(r)); + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_INFO "No SOC reg property in device tree\n"); + return; + } + immap = ioremap(r.start, sizeof(*immap)); + of_node_put(np); + + /* install the demultiplexer for the PCI cascade interrupt */ + np = of_find_node_by_type(NULL, "pci"); + if (!np) { + printk(KERN_INFO "No pci node on device tree\n"); + iounmap(immap); + return; + } + irq_map = get_property(np, "interrupt-map", &size); + if ((!irq_map) || (size <= 7)) { + printk(KERN_INFO "No interrupt-map property of pci node\n"); + iounmap(immap); + return; + } + size /= sizeof(irq_map[0]); + for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) { + if (irq_map[5] < irq_min) + irq_min = irq_map[5]; + if (irq_map[5] > irq_max) + irq_max = irq_map[5]; + } + pci_int_base = irq_min; + irq = irq_of_parse_and_map(np, 0); + set_irq_chained_handler(irq, m82xx_pci_irq_demux); + of_node_put(np); + np = of_find_node_by_type(NULL, "pci-pic"); + if (!np) { + printk(KERN_INFO "No pci pic node on device tree\n"); + iounmap(immap); + return; + } + pci_pic_node = of_node_get(np); + /* PCI interrupt controller registers: status and mask */ + regs = get_property(np, "reg", &size); + if ((!regs) || (size <= 2)) { + printk(KERN_INFO "No reg property in pci pic node\n"); + iounmap(immap); + return; + } + pci_regs.pci_int_stat_reg = + ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg)); + pci_regs.pci_int_mask_reg = + ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg)); + of_node_put(np); + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = regs[0] | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *pci_regs.pci_int_mask_reg |= 0xfff00000; + iounmap(immap); + pci_pic_host = + irq_alloc_host(IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1, + &pci_pic_host_ops, irq_max + 1); + return; +} + +static int m82xx_pci_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +static void +__init mpc82xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) { + pci_read_irq_line(dev); + } +} + +void __init add_bridge(struct device_node *np) +{ + int len; + struct pci_controller *hose; + struct resource r; + const int *bus_range; + const void *ptr; + + memset(&r, 0, sizeof(r)); + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_INFO "No PCI reg property in device tree\n"); + return; + } + if (!(ptr = get_property(np, "clock-frequency", NULL))) { + printk(KERN_INFO "No clock-frequency property in PCI node"); + return; + } + pci_clk_frq = *(uint *) ptr; + of_node_put(np); + bus_range = get_property(np, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", np->full_name); + } + + pci_assign_all_buses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->arch_data = np; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->bus_offset = 0; + + hose->set_cfg_type = 1; + + setup_indirect_pci(hose, + r.start + offsetof(pci_cpm2_t, pci_cfg_addr), + r.start + offsetof(pci_cpm2_t, pci_cfg_data)); + + pci_process_bridge_OF_ranges(hose, np, 1); +} +#endif + +/* + * Setup the architecture + */ +static void __init mpc82xx_ads_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc82xx_ads_setup_arch()", 0); + cpm2_reset(); + + /* Map I/O region to a 256MB BAT */ + + m82xx_board_setup(); + +#ifdef CONFIG_PCI + ppc_md.pci_exclude_device = m82xx_pci_exclude_device; + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + of_node_put(np); + ppc_md.pci_map_irq = NULL; + ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup; + ppc_md.pcibios_fixup_bus = NULL; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc82xx_ads_probe(void) +{ + /* We always match for now, eventually we should look at + * the flat dev tree to ensure this is the board we are + * supposed to run on + */ + return 1; +} + +#define RMR_CSRE 0x00000001 +static void m82xx_restart(char *cmd) +{ + __volatile__ unsigned char dummy; + + local_irq_disable(); + ((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE; + + /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */ + mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR)); + dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0]; + printk("Restart failed\n"); + while (1) ; +} + +static void m82xx_halt(void) +{ + local_irq_disable(); + while (1) ; +} + +define_machine(mpc82xx_ads) +{ + .name = "MPC82xx ADS", + .probe = mpc82xx_ads_probe, + .setup_arch = mpc82xx_ads_setup_arch, + .init_IRQ = mpc82xx_ads_pic_init, + .show_cpuinfo = mpc82xx_ads_show_cpuinfo, + .get_irq = cpm2_get_irq, + .calibrate_decr = m82xx_calibrate_decr, + .restart = m82xx_restart,.halt = m82xx_halt, +}; diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h new file mode 100644 index 0000000..a734821 --- /dev/null +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -0,0 +1,67 @@ +/* + * PQ2/mpc8260 board-specific stuff + * + * A collection of structures, addresses, and values associated with + * the Freescale MPC8260ADS/MPC8266ADS-PCI boards. + * Copied from the RPX-Classic and SBS8260 stuff. + * + * Author: Vitaly Bordug + * + * Originally written by Dan Malek for Motorola MPC8260 family + * + * Copyright (c) 2001 Dan Malek + * Copyright (c) 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __MACH_ADS8260_DEFS +#define __MACH_ADS8260_DEFS + +#include + +#include + +/* For our show_cpuinfo hooks. */ +#define CPUINFO_VENDOR "Freescale Semiconductor" +#define CPUINFO_MACHINE "PQ2 ADS PowerPC" + +/* Backword-compatibility stuff for the drivers */ +#define CPM_MAP_ADDR ((uint)0xf0000000) +#define CPM_IRQ_OFFSET 0 + +/* The ADS8260 has 16, 32-bit wide control/status registers, accessed + * only on word boundaries. + * Not all are used (yet), or are interesting to us (yet). + */ + +/* Things of interest in the CSR. + */ +#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */ +#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */ +#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable*/ +#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ +#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */ +#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */ +#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/ +#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */ + +/* cpm serial driver works with constants below */ + +#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) + +void m82xx_pci_init_irq(void); +void mpc82xx_ads_show_cpuinfo(struct seq_file*); +void m82xx_calibrate_decr(void); + +#endif /* __MACH_ADS8260_DEFS */ +#endif /* __KERNEL__ */