From: Jiri Kosina Date: Thu, 8 Mar 2007 15:47:49 +0000 (+0100) Subject: USB HID: move usbhid code from drivers/usb/input to drivers/hid/usbhid X-Git-Tag: v2.6.22-rc1~1106^2~20 X-Git-Url: http://ftp.safe.ca/?a=commitdiff_plain;h=6db3dfefa28739e7c9c60809c3a5aef7cc088b97;p=safe%2Fjmp%2Flinux-2.6 USB HID: move usbhid code from drivers/usb/input to drivers/hid/usbhid Separate usbhid code into dedicated drivers/hid/usbhid directory as discussed previously with Greg, so that it eases maintaineance process. Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 850788f..8fbe9fd 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -36,5 +36,7 @@ config HID_DEBUG If unsure, say N +source "drivers/hid/usbhid/Kconfig" + endmenu diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 52e97d8..68d1376 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -6,3 +6,7 @@ hid-objs := hid-core.o hid-input.o obj-$(CONFIG_HID) += hid.o hid-$(CONFIG_HID_DEBUG) += hid-debug.o +obj-$(CONFIG_USB_HID) += usbhid/ +obj-$(CONFIG_USB_MOUSE) += usbhid/ +obj-$(CONFIG_USB_KBD) += usbhid/ + diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig new file mode 100644 index 0000000..7c87bdc --- /dev/null +++ b/drivers/hid/usbhid/Kconfig @@ -0,0 +1,149 @@ +comment "USB Input Devices" + depends on USB + +config USB_HID + tristate "USB Human Interface Device (full HID) support" + default y + depends on USB && INPUT + select HID + ---help--- + Say Y here if you want full HID support to connect USB keyboards, + mice, joysticks, graphic tablets, or any other HID based devices + to your computer via USB, as well as Uninterruptible Power Supply + (UPS) and monitor control devices. + + You can't use this driver and the HIDBP (Boot Protocol) keyboard + and mouse drivers at the same time. More information is available: + . + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called usbhid. + +comment "Input core support is needed for USB HID input layer or HIDBP support" + depends on USB_HID && INPUT=n + +config USB_HIDINPUT_POWERBOOK + bool "Enable support for iBook/PowerBook special keys" + default n + depends on USB_HID + help + Say Y here if you want support for the special keys (Fn, Numlock) on + Apple iBooks and PowerBooks. + + If unsure, say N. + +config HID_FF + bool "Force feedback support (EXPERIMENTAL)" + depends on USB_HID && EXPERIMENTAL + help + Say Y here is you want force feedback support for a few HID devices. + See below for a list of supported devices. + + See for a description of the force + feedback API. + + If unsure, say N. + +config HID_PID + bool "PID device support" + depends on HID_FF + help + Say Y here if you have a PID-compliant device and wish to enable force + feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such + devices. + +config LOGITECH_FF + bool "Logitech devices support" + depends on HID_FF + select INPUT_FF_MEMLESS if USB_HID + help + Say Y here if you have one of these devices: + - Logitech WingMan Cordless RumblePad + - Logitech WingMan Cordless RumblePad 2 + - Logitech WingMan Force 3D + - Logitech Formula Force EX + - Logitech MOMO Force wheel + + and if you want to enable force feedback for them. + Note: if you say N here, this device will still be supported, but without + force feedback. + +config PANTHERLORD_FF + bool "PantherLord USB/PS2 2in1 Adapter support" + depends on HID_FF + select INPUT_FF_MEMLESS if USB_HID + help + Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want + to enable force feedback support for it. + +config THRUSTMASTER_FF + bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)" + depends on HID_FF && EXPERIMENTAL + select INPUT_FF_MEMLESS if USB_HID + help + Say Y here if you have a THRUSTMASTER FireStore Dual Power 2, + and want to enable force feedback support for it. + Note: if you say N here, this device will still be supported, but without + force feedback. + +config ZEROPLUS_FF + bool "Zeroplus based game controller support" + depends on HID_FF + select INPUT_FF_MEMLESS if USB_HID + help + Say Y here if you have a Zeroplus based game controller and want to + enable force feedback for it. + +config USB_HIDDEV + bool "/dev/hiddev raw HID device support" + depends on USB_HID + help + Say Y here if you want to support HID devices (from the USB + specification standpoint) that aren't strictly user interface + devices, like monitor controls and Uninterruptable Power Supplies. + + This module supports these devices separately using a separate + event interface on /dev/usb/hiddevX (char 180:96 to 180:111). + + If unsure, say Y. + +menu "USB HID Boot Protocol drivers" + depends on USB!=n && USB_HID!=y + +config USB_KBD + tristate "USB HIDBP Keyboard (simple Boot) support" + depends on USB && INPUT + ---help--- + Say Y here only if you are absolutely sure that you don't want + to use the generic HID driver for your USB keyboard and prefer + to use the keyboard in its limited Boot Protocol mode instead. + + This is almost certainly not what you want. This is mostly + useful for embedded applications or simple keyboards. + + To compile this driver as a module, choose M here: the + module will be called usbkbd. + + If even remotely unsure, say N. + +config USB_MOUSE + tristate "USB HIDBP Mouse (simple Boot) support" + depends on USB && INPUT + ---help--- + Say Y here only if you are absolutely sure that you don't want + to use the generic HID driver for your USB mouse and prefer + to use the mouse in its limited Boot Protocol mode instead. + + This is almost certainly not what you want. This is mostly + useful for embedded applications or simple mice. + + To compile this driver as a module, choose M here: the + module will be called usbmouse. + + If even remotely unsure, say N. + +endmenu + + diff --git a/drivers/hid/usbhid/Makefile b/drivers/hid/usbhid/Makefile new file mode 100644 index 0000000..de9bc1f --- /dev/null +++ b/drivers/hid/usbhid/Makefile @@ -0,0 +1,35 @@ +# +# Makefile for the USB input drivers +# + +# Multipart objects. +usbhid-objs := hid-core.o + +# Optional parts of multipart objects. + +ifeq ($(CONFIG_USB_HIDDEV),y) + usbhid-objs += hiddev.o +endif +ifeq ($(CONFIG_HID_PID),y) + usbhid-objs += hid-pidff.o +endif +ifeq ($(CONFIG_LOGITECH_FF),y) + usbhid-objs += hid-lgff.o +endif +ifeq ($(CONFIG_PANTHERLORD_FF),y) + usbhid-objs += hid-plff.o +endif +ifeq ($(CONFIG_THRUSTMASTER_FF),y) + usbhid-objs += hid-tmff.o +endif +ifeq ($(CONFIG_ZEROPLUS_FF),y) + usbhid-objs += hid-zpff.o +endif +ifeq ($(CONFIG_HID_FF),y) + usbhid-objs += hid-ff.o +endif + +obj-$(CONFIG_USB_HID) += usbhid.o +obj-$(CONFIG_USB_KBD) += usbkbd.o +obj-$(CONFIG_USB_MOUSE) += usbmouse.o + diff --git a/drivers/usb/input/hid-core.c b/drivers/hid/usbhid/hid-core.c similarity index 100% rename from drivers/usb/input/hid-core.c rename to drivers/hid/usbhid/hid-core.c diff --git a/drivers/usb/input/hid-ff.c b/drivers/hid/usbhid/hid-ff.c similarity index 100% rename from drivers/usb/input/hid-ff.c rename to drivers/hid/usbhid/hid-ff.c diff --git a/drivers/usb/input/hid-lgff.c b/drivers/hid/usbhid/hid-lgff.c similarity index 100% rename from drivers/usb/input/hid-lgff.c rename to drivers/hid/usbhid/hid-lgff.c diff --git a/drivers/usb/input/hid-pidff.c b/drivers/hid/usbhid/hid-pidff.c similarity index 100% rename from drivers/usb/input/hid-pidff.c rename to drivers/hid/usbhid/hid-pidff.c diff --git a/drivers/usb/input/hid-plff.c b/drivers/hid/usbhid/hid-plff.c similarity index 100% rename from drivers/usb/input/hid-plff.c rename to drivers/hid/usbhid/hid-plff.c diff --git a/drivers/usb/input/hid-tmff.c b/drivers/hid/usbhid/hid-tmff.c similarity index 100% rename from drivers/usb/input/hid-tmff.c rename to drivers/hid/usbhid/hid-tmff.c diff --git a/drivers/usb/input/hid-zpff.c b/drivers/hid/usbhid/hid-zpff.c similarity index 100% rename from drivers/usb/input/hid-zpff.c rename to drivers/hid/usbhid/hid-zpff.c diff --git a/drivers/usb/input/hiddev.c b/drivers/hid/usbhid/hiddev.c similarity index 100% rename from drivers/usb/input/hiddev.c rename to drivers/hid/usbhid/hiddev.c diff --git a/drivers/usb/input/usbhid.h b/drivers/hid/usbhid/usbhid.h similarity index 100% rename from drivers/usb/input/usbhid.h rename to drivers/hid/usbhid/usbhid.h diff --git a/drivers/usb/input/usbkbd.c b/drivers/hid/usbhid/usbkbd.c similarity index 100% rename from drivers/usb/input/usbkbd.c rename to drivers/hid/usbhid/usbkbd.c diff --git a/drivers/usb/input/usbmouse.c b/drivers/hid/usbhid/usbmouse.c similarity index 100% rename from drivers/usb/input/usbmouse.c rename to drivers/hid/usbhid/usbmouse.c diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7ff46..f972fcc 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -27,10 +27,7 @@ obj-$(CONFIG_USB) += storage/ obj-$(CONFIG_USB_ACECAD) += input/ obj-$(CONFIG_USB_AIPTEK) += input/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ -obj-$(CONFIG_USB_HID) += input/ -obj-$(CONFIG_USB_KBD) += input/ obj-$(CONFIG_USB_KBTAB) += input/ -obj-$(CONFIG_USB_MOUSE) += input/ obj-$(CONFIG_USB_MTOUCH) += input/ obj-$(CONFIG_USB_POWERMATE) += input/ obj-$(CONFIG_USB_WACOM) += input/ diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 69a9f3b..a792e42 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -4,151 +4,6 @@ comment "USB Input Devices" depends on USB -config USB_HID - tristate "USB Human Interface Device (full HID) support" - default y - depends on USB && INPUT - select HID - ---help--- - Say Y here if you want full HID support to connect USB keyboards, - mice, joysticks, graphic tablets, or any other HID based devices - to your computer via USB, as well as Uninterruptible Power Supply - (UPS) and monitor control devices. - - You can't use this driver and the HIDBP (Boot Protocol) keyboard - and mouse drivers at the same time. More information is available: - . - - If unsure, say Y. - - To compile this driver as a module, choose M here: the - module will be called usbhid. - -comment "Input core support is needed for USB HID input layer or HIDBP support" - depends on USB_HID && INPUT=n - -config USB_HIDINPUT_POWERBOOK - bool "Enable support for iBook/PowerBook special keys" - default n - depends on USB_HID - help - Say Y here if you want support for the special keys (Fn, Numlock) on - Apple iBooks and PowerBooks. - - If unsure, say N. - -config HID_FF - bool "Force feedback support (EXPERIMENTAL)" - depends on USB_HID && EXPERIMENTAL - help - Say Y here is you want force feedback support for a few HID devices. - See below for a list of supported devices. - - See for a description of the force - feedback API. - - If unsure, say N. - -config HID_PID - bool "PID device support" - depends on HID_FF - help - Say Y here if you have a PID-compliant device and wish to enable force - feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such - devices. - -config LOGITECH_FF - bool "Logitech devices support" - depends on HID_FF - select INPUT_FF_MEMLESS if USB_HID - help - Say Y here if you have one of these devices: - - Logitech WingMan Cordless RumblePad - - Logitech WingMan Cordless RumblePad 2 - - Logitech WingMan Force 3D - - Logitech Formula Force EX - - Logitech MOMO Force wheel - - and if you want to enable force feedback for them. - Note: if you say N here, this device will still be supported, but without - force feedback. - -config PANTHERLORD_FF - bool "PantherLord USB/PS2 2in1 Adapter support" - depends on HID_FF - select INPUT_FF_MEMLESS if USB_HID - help - Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want - to enable force feedback support for it. - -config THRUSTMASTER_FF - bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)" - depends on HID_FF && EXPERIMENTAL - select INPUT_FF_MEMLESS if USB_HID - help - Say Y here if you have a THRUSTMASTER FireStore Dual Power 2, - and want to enable force feedback support for it. - Note: if you say N here, this device will still be supported, but without - force feedback. - -config ZEROPLUS_FF - bool "Zeroplus based game controller support" - depends on HID_FF - select INPUT_FF_MEMLESS if USB_HID - help - Say Y here if you have a Zeroplus based game controller and want to - enable force feedback for it. - -config USB_HIDDEV - bool "/dev/hiddev raw HID device support" - depends on USB_HID - help - Say Y here if you want to support HID devices (from the USB - specification standpoint) that aren't strictly user interface - devices, like monitor controls and Uninterruptable Power Supplies. - - This module supports these devices separately using a separate - event interface on /dev/usb/hiddevX (char 180:96 to 180:111). - - If unsure, say Y. - -menu "USB HID Boot Protocol drivers" - depends on USB!=n && USB_HID!=y - -config USB_KBD - tristate "USB HIDBP Keyboard (simple Boot) support" - depends on USB && INPUT - ---help--- - Say Y here only if you are absolutely sure that you don't want - to use the generic HID driver for your USB keyboard and prefer - to use the keyboard in its limited Boot Protocol mode instead. - - This is almost certainly not what you want. This is mostly - useful for embedded applications or simple keyboards. - - To compile this driver as a module, choose M here: the - module will be called usbkbd. - - If even remotely unsure, say N. - -config USB_MOUSE - tristate "USB HIDBP Mouse (simple Boot) support" - depends on USB && INPUT - ---help--- - Say Y here only if you are absolutely sure that you don't want - to use the generic HID driver for your USB mouse and prefer - to use the mouse in its limited Boot Protocol mode instead. - - This is almost certainly not what you want. This is mostly - useful for embedded applications or simple mice. - - To compile this driver as a module, choose M here: the - module will be called usbmouse. - - If even remotely unsure, say N. - -endmenu - config USB_AIPTEK tristate "Aiptek 6000U/8000U tablet support" depends on USB && INPUT diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index a9d206c..9bf420e 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -4,40 +4,12 @@ # Multipart objects. wacom-objs := wacom_wac.o wacom_sys.o -usbhid-objs := hid-core.o - -# Optional parts of multipart objects. - -ifeq ($(CONFIG_USB_HIDDEV),y) - usbhid-objs += hiddev.o -endif -ifeq ($(CONFIG_HID_PID),y) - usbhid-objs += hid-pidff.o -endif -ifeq ($(CONFIG_LOGITECH_FF),y) - usbhid-objs += hid-lgff.o -endif -ifeq ($(CONFIG_PANTHERLORD_FF),y) - usbhid-objs += hid-plff.o -endif -ifeq ($(CONFIG_THRUSTMASTER_FF),y) - usbhid-objs += hid-tmff.o -endif -ifeq ($(CONFIG_ZEROPLUS_FF),y) - usbhid-objs += hid-zpff.o -endif -ifeq ($(CONFIG_HID_FF),y) - usbhid-objs += hid-ff.o -endif obj-$(CONFIG_USB_AIPTEK) += aiptek.o obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o -obj-$(CONFIG_USB_HID) += usbhid.o -obj-$(CONFIG_USB_KBD) += usbkbd.o obj-$(CONFIG_USB_KBTAB) += kbtab.o obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o -obj-$(CONFIG_USB_MOUSE) += usbmouse.o obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o obj-$(CONFIG_USB_EGALAX) += touchkitusb.o