From: Alan Cox Date: Wed, 24 Jun 2009 17:29:44 +0000 (+0100) Subject: [libata] Add pata_rdc driver for RDC ATA devices X-Git-Tag: v2.6.32-rc1~717^2~17 X-Git-Url: http://ftp.safe.ca/?a=commitdiff_plain;h=6b406782ad0408f9cb480c2e1b543d194e8206d0;p=safe%2Fjmp%2Flinux-2.6 [libata] Add pata_rdc driver for RDC ATA devices From: Alan Cox Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 8e64d3c..ab2fa4e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -597,6 +597,16 @@ config PATA_RB532 If unsure, say N. +config PATA_RDC + tristate "RDC PATA support" + depends on PCI + help + This option enables basic support for the later RDC PATA controllers + controllers via the new ATA layer. For the RDC 1010, you need to + enable the IT821X driver instead. + + If unsure, say N. + config PATA_RZ1000 tristate "PC Tech RZ1000 PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 38906f9..463eb52 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o +obj-$(CONFIG_PATA_RDC) += pata_rdc.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c new file mode 100644 index 0000000..c843a1e --- /dev/null +++ b/drivers/ata/pata_rdc.c @@ -0,0 +1,400 @@ +/* + * pata_rdc - Driver for later RDC PATA controllers + * + * This is actually a driver for hardware meeting + * INCITS 370-2004 (1510D): ATA Host Adapter Standards + * + * Based on ata_piix. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_rdc" +#define DRV_VERSION "0.01" + +struct rdc_host_priv { + u32 saved_iocfg; +}; + +/** + * rdc_pata_cable_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from ATA PCI device's PCI config + * register. This register is normally set by firmware (BIOS). + * + * LOCKING: + * None (inherited from caller). + */ + +static int rdc_pata_cable_detect(struct ata_port *ap) +{ + struct rdc_host_priv *hpriv = ap->host->private_data; + u8 mask; + + /* check BIOS cable detect results */ + mask = 0x30 << (2 * ap->port_no); + if ((hpriv->saved_iocfg & mask) == 0) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * rdc_pata_prereset - prereset for PATA host controller + * @link: Target link + * @deadline: deadline jiffies for the operation + * + * LOCKING: + * None (inherited from caller). + */ +static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + static const struct pci_bits rdc_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no])) + return -ENOENT; + return ata_sff_prereset(link, deadline); +} + +/** + * rdc_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int is_slave = (adev->devno != 0); + unsigned int master_port= ap->port_no ? 0x42 : 0x40; + unsigned int slave_port = 0x44; + u16 master_data; + u8 slave_data; + u8 udma_enable; + int control = 0; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio >= 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE enable */ + + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + /* PIO configuration clears DTE unconditionally. It will be + * programmed in set_dmamode which is guaranteed to be called + * after set_piomode if any DMA mode is available. + */ + pci_read_config_word(dev, master_port, &master_data); + if (is_slave) { + /* clear TIME1|IE1|PPE1|DTE1 */ + master_data &= 0xff0f; + /* Enable SITRE (separate slave timing register) */ + master_data |= 0x4000; + /* enable PPE1, IE1 and TIME1 as needed */ + master_data |= (control << 4); + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + /* Load the timing nibble for this slave */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) + << (ap->port_no ? 4 : 0); + } else { + /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */ + master_data &= 0xccf0; + /* Enable PPE, IE and TIME as appropriate */ + master_data |= control; + /* load ISP and RCT */ + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); + + /* Ensure the UDMA bit is off - it will be turned back on if + UDMA is selected */ + + pci_read_config_byte(dev, 0x48, &udma_enable); + udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); + pci_write_config_byte(dev, 0x48, udma_enable); +} + +/** + * rdc_set_dmamode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Drive in question + * + * Set UDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable = 0; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + u16 ideconf; + int u_clock, u_speed; + + /* + * UDMA is handled by a combination of clock switching and + * selection of dividers + * + * Handy rule: Odd modes are UDMATIMx 01, even are 02 + * except UDMA0 which is 00 + */ + u_speed = min(2 - (udma & 1), udma); + if (udma == 5) + u_clock = 0x1000; /* 100Mhz */ + else if (udma > 2) + u_clock = 1; /* 66Mhz */ + else + u_clock = 0; /* 33Mhz */ + + udma_enable |= (1 << devid); + + /* Load the CT/RP selection */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(3 << (4 * devid)); + udma_timing |= u_speed << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + + /* Select a 33/66/100Mhz clock */ + pci_read_config_word(dev, 0x54, &ideconf); + ideconf &= ~(0x1001 << devid); + ideconf |= u_clock << devid; + pci_write_config_word(dev, 0x54, ideconf); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (ap->port_no ? 0x0f : 0xf0); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); +} + +static struct ata_port_operations rdc_pata_ops = { + .inherits = &ata_bmdma32_port_ops, + .cable_detect = rdc_pata_cable_detect, + .set_piomode = rdc_set_piomode, + .set_dmamode = rdc_set_dmamode, + .prereset = rdc_pata_prereset, +}; + +static struct ata_port_info rdc_port_info = { + + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &rdc_pata_ops, +}; + +static struct scsi_host_template rdc_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/** + * rdc_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in rdc_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int __devinit rdc_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct device *dev = &pdev->dev; + struct ata_port_info port_info[2]; + const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; + unsigned long port_flags; + struct ata_host *host; + struct rdc_host_priv *hpriv; + int rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + port_info[0] = rdc_port_info; + port_info[1] = rdc_port_info; + + port_flags = port_info[0].flags; + + /* enable device and prepare host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + + /* Save IOCFG, this will be used for cable detection, quirk + * detection and restoration on detach. + */ + pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg); + + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + host->private_data = hpriv; + + pci_intx(pdev, 1); + + host->flags |= ATA_HOST_PARALLEL_SCAN; + + pci_set_master(pdev); + return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht); +} + +static void rdc_remove_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct rdc_host_priv *hpriv = host->private_data; + + pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg); + + ata_pci_remove_one(pdev); +} + +static const struct pci_device_id rdc_pci_tbl[] = { + { PCI_DEVICE(0x17F3, 0x1011), }, + { PCI_DEVICE(0x17F3, 0x1012), }, + { } /* terminate list */ +}; + +static struct pci_driver rdc_pci_driver = { + .name = DRV_NAME, + .id_table = rdc_pci_tbl, + .probe = rdc_init_one, + .remove = rdc_remove_one, +}; + + +static int __init rdc_init(void) +{ + return pci_register_driver(&rdc_pci_driver); +} + +static void __exit rdc_exit(void) +{ + pci_unregister_driver(&rdc_pci_driver); +} + +module_init(rdc_init); +module_exit(rdc_exit); + +MODULE_AUTHOR("Alan Cox (based on ata_piix)"); +MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, rdc_pci_tbl); +MODULE_VERSION(DRV_VERSION);