#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Tue Mar 8 17:31:00 2005
+# Linux kernel version: 2.6.13-mm1
+# Thu Sep 1 17:16:03 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
+# CONFIG_E200 is not set
# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
# CONFIG_TAU is not set
+# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_83xx is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_STD_MMU=y
CONFIG_NOT_COHERENT_CACHE=y
#
+# Performance-monitoring counters support
+#
+# CONFIG_PERFCTR is not set
+
+#
# Platform options
#
# CONFIG_PPC_MULTIPLATFORM is not set
CONFIG_KATANA=y
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_EV64360 is not set
CONFIG_MV64360=y
CONFIG_MV64X60=y
CONFIG_MV64X60_BASE=0xf8100000
CONFIG_MV64X60_NEW_BASE=0xf8100000
# CONFIG_SMP is not set
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0,9600 ip=on"
+CONFIG_CMDLINE="console=ttyMM0 ip=on"
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# Bus options
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
#
# PCCARD (PCMCIA/CardBus) support
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_HIGHMEM_START_BOOL is not set
CONFIG_HIGHMEM_START=0xfe000000
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_BOOT_LOAD=0x00800000
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
CONFIG_MTD_PHYSMAP_START=0xe0000000
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
CONFIG_MV643XX_ETH_0=y
CONFIG_MV643XX_ETH_1=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_KGDBOE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
CONFIG_SERIAL_MPSC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_MV64XXX=y
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+CONFIG_SENSORS_M41T00=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_M41T00=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
+# Misc devices
#
-# CONFIG_W1 is not set
#
-# Misc devices
+# Multimedia Capabilities Port drivers
#
#
CONFIG_DUMMY_CONSOLE=y
#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+
+#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Kernel hacking
#
-# CONFIG_DEBUG_KERNEL is not set
# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SERIAL_TEXT_DEBUG is not set
#
# Security options
#include <linux/bootimg.h>
#endif
#include <asm/io.h>
+#include <asm/unistd.h>
#include <asm/page.h>
#include <asm/time.h>
#include <asm/smp.h>
#include <asm/mv64x60.h>
#include <platforms/katana.h>
-static struct mv64x60_handle bh;
-static katana_id_t katana_id;
-static void __iomem *cpld_base;
-static void __iomem *sram_base;
-
-static u32 katana_flash_size_0;
-static u32 katana_flash_size_1;
-
-static u32 katana_bus_frequency;
+static struct mv64x60_handle bh;
+static katana_id_t katana_id;
+static void __iomem *cpld_base;
+static void __iomem *sram_base;
+static u32 katana_flash_size_0;
+static u32 katana_flash_size_1;
+static u32 katana_bus_frequency;
+static struct pci_controller katana_hose_a;
unsigned char __res[sizeof(bd_t)];
KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i },
/* IDSEL 6 (T8110) */
{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
+ /* IDSEL 7 (unused) */
+ {0, 0, 0, 0 },
+ /* IDSEL 8 (Intel 82544) (752i only but doesn't harm 750i) */
+ {KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
};
- const long min_idsel = 4, max_idsel = 6, irqs_per_slot = 4;
+ const long min_idsel = 4, max_idsel = 8, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
save_exclude = mv64x60_pci_exclude_bridge;
mv64x60_pci_exclude_bridge = 0;
- early_read_config_word(bh.hose_a, 0,
+ early_read_config_word(bh.hose_b, 0,
PCI_DEVFN(0,0), PCI_DEVICE_ID, &val);
mv64x60_pci_exclude_bridge = save_exclude;
struct mv64x60_setup_info si;
void __iomem *vaddr;
int i;
- u16 val;
+ u32 v;
+ u16 val, type;
u8 save_exclude;
/*
PCI_DEVICE_ID, val);
}
+ /*
+ * While we're in here, set the hotswap register correctly.
+ * Turn off blue LED; mask ENUM#, clear insertion & extraction bits.
+ */
+ early_read_config_dword(&hose, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, &v);
+ v &= ~(1<<19);
+ v |= ((1<<17) | (1<<22) | (1<<23));
+ early_write_config_dword(&hose, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, v);
+
+ /* While we're at it, grab the bridge type for later */
+ early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &type);
+
mv64x60_pci_exclude_bridge = save_exclude;
iounmap(vaddr);
si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
si.pci_1.acc_cntl_options[i] =
- MV64360_PCI_ACC_CNTL_SNOOP_NONE |
- MV64360_PCI_ACC_CNTL_SWAP_NONE |
- MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
- MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+ MV64360_PCI_ACC_CNTL_SNOOP_NONE |
+ MV64360_PCI_ACC_CNTL_SWAP_NONE |
+ MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
+ MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
#else
si.cpu_prot_options[i] = 0;
- si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
- si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
- si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
+ si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
+ si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
+ si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
si.pci_1.acc_cntl_options[i] =
- MV64360_PCI_ACC_CNTL_SNOOP_WB |
- MV64360_PCI_ACC_CNTL_SWAP_NONE |
- MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
- MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+ MV64360_PCI_ACC_CNTL_SNOOP_WB |
+ MV64360_PCI_ACC_CNTL_SWAP_NONE |
+ MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
+ ((type == PCI_DEVICE_ID_MARVELL_MV64360) ?
+ MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES :
+ MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES);
#endif
}
mv64x60_set_bus(&bh, 1, 0);
bh.hose_b->first_busno = 0;
bh.hose_b->last_busno = 0xff;
+
+ /*
+ * Need to access hotswap reg which is in the pci config area of the
+ * bridge's hose 0. Note that pcibios_alloc_controller() can't be used
+ * to alloc hose_a b/c that would make hose 0 known to the generic
+ * pci code which we don't want.
+ */
+ bh.hose_a = &katana_hose_a;
+ setup_indirect_pci_nomap(bh.hose_a,
+ bh.v_base + MV64x60_PCI0_CONFIG_ADDR,
+ bh.v_base + MV64x60_PCI0_CONFIG_DATA);
}
/* Bridge & platform setup routines */
void __init
katana_intr_setup(void)
{
+ if (bh.type == MV64x60_TYPE_MV64460) /* As per instns from Marvell */
+ mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, 1 << 15);
+
/* MPP 8, 9, and 10 */
mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
/* Config GPP intr ctlr to respond to level trigger */
mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
- /* Erranum FEr PCI-#8 */
- mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
- mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
+ if (bh.type == MV64x60_TYPE_MV64360) {
+ /* Erratum FEr PCI-#9 */
+ mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD,
+ (1<<4) | (1<<5) | (1<<6) | (1<<7));
+ mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, (1<<8) | (1<<9));
+ } else {
+ mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<6) | (1<<7));
+ mv64x60_set_bits(&bh, MV64x60_PCI1_CMD,
+ (1<<4) | (1<<5) | (1<<8) | (1<<9));
+ }
/*
* Dismiss and then enable interrupt on GPP interrupt cause
ppc_md.progress("katana_setup_arch: exit", 0);
}
+void
+katana_fixup_resources(struct pci_dev *dev)
+{
+ u16 v16;
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_LINE_SIZE>>2);
+
+ pci_read_config_word(dev, PCI_COMMAND, &v16);
+ v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK;
+ pci_write_config_word(dev, PCI_COMMAND, v16);
+}
+
+static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
+ 0, 0, 2, 2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,/* 0-15*/
+ 16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 0 /*16-31*/
+};
+
+static int
+katana_get_cpu_freq(void)
+{
+ unsigned long pll_cfg;
+
+ pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
+ return katana_bus_frequency * cpu_750xx[pll_cfg]/2;
+}
+
/* Platform device data fixup routines. */
#if defined(CONFIG_SERIAL_MPSC)
static void __init
katana_fixup_mpsc_pdata(struct platform_device *pdev)
{
- struct mpsc_pdata *pdata;
+ struct mpsc_pdata *pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
+ bd_t *bdp = (bd_t *)__res;
- pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
+ if (bdp->bi_baudrate)
+ pdata->default_baud = bdp->bi_baudrate;
+ else
+ pdata->default_baud = KATANA_DEFAULT_BAUD;
pdata->max_idle = 40;
- pdata->default_baud = KATANA_DEFAULT_BAUD;
pdata->brg_clk_src = KATANA_MPSC_CLK_SRC;
/*
* TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts,
}
#endif
+#if defined(CONFIG_SYSFS)
+static void __init
+katana_fixup_mv64xxx_pdata(struct platform_device *pdev)
+{
+ struct mv64xxx_pdata *pdata = (struct mv64xxx_pdata *)
+ pdev->dev.platform_data;
+
+ /* Katana supports the mv64xxx hotswap register */
+ pdata->hs_reg_valid = 1;
+}
+#endif
+
static int __init
katana_platform_notify(struct device *dev)
{
{ MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata },
{ MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata },
#endif
+#if defined(CONFIG_SYSFS)
+ { MV64XXX_DEV_NAME ".0", katana_fixup_mv64xxx_pdata },
+#endif
};
struct platform_device *pdev;
int i;
if (dev && dev->bus_id)
for (i=0; i<ARRAY_SIZE(dev_map); i++)
if (!strncmp(dev->bus_id, dev_map[i].bus_id,
- BUS_ID_SIZE)) {
-
+ BUS_ID_SIZE)) {
pdev = container_of(dev,
struct platform_device, dev);
dev_map[i].rtn(pdev);
ptbl_entries = (size >= (64*MB)) ? 6 : 4;
if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition),
- GFP_KERNEL)) == NULL) {
-
+ GFP_KERNEL)) == NULL) {
printk(KERN_WARNING "Can't alloc MTD partition table\n");
return -ENOMEM;
}
physmap_set_partitions(ptbl, ptbl_entries);
return 0;
}
-
arch_initcall(katana_setup_mtd);
#endif
{
u8 v;
- if (katana_id == KATANA_ID_752I) {
+ /* Turn on blue LED to indicate its okay to remove */
+ if (katana_id == KATANA_ID_750I) {
+ u32 v;
+ u8 save_exclude;
+
+ /* Set LOO bit in cPCI HotSwap reg of hose 0 to turn on LED. */
+ save_exclude = mv64x60_pci_exclude_bridge;
+ mv64x60_pci_exclude_bridge = 0;
+ early_read_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, &v);
+ v &= 0xff;
+ v |= (1 << 19);
+ early_write_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, v);
+ mv64x60_pci_exclude_bridge = save_exclude;
+ } else if (katana_id == KATANA_ID_752I) {
v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF);
v |= HSL_PLD_HOT_SWAP_LED_BIT;
out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v);
static int
katana_show_cpuinfo(struct seq_file *m)
{
+ char *s;
+
+ seq_printf(m, "cpu freq\t: %dMHz\n",
+ (katana_get_cpu_freq() + 500000) / 1000000);
+ seq_printf(m, "bus freq\t: %ldMHz\n",
+ ((long)katana_bus_frequency + 500000) / 1000000);
seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n");
seq_printf(m, "board\t\t: ");
-
switch (katana_id) {
case KATANA_ID_3750:
- seq_printf(m, "Katana 3750\n");
+ seq_printf(m, "Katana 3750");
break;
case KATANA_ID_750I:
- seq_printf(m, "Katana 750i\n");
+ seq_printf(m, "Katana 750i");
break;
case KATANA_ID_752I:
- seq_printf(m, "Katana 752i\n");
+ seq_printf(m, "Katana 752i");
break;
default:
- seq_printf(m, "Unknown\n");
+ seq_printf(m, "Unknown");
break;
}
-
- seq_printf(m, "product ID\t: 0x%x\n",
+ seq_printf(m, " (product id: 0x%x)\n",
in_8(cpld_base + KATANA_CPLD_PRODUCT_ID));
+
+ seq_printf(m, "pci mode\t: %sMonarch\n",
+ katana_is_monarch()? "" : "Non-");
seq_printf(m, "hardware rev\t: 0x%x\n",
in_8(cpld_base+KATANA_CPLD_HARDWARE_VER));
- seq_printf(m, "PLD rev\t\t: 0x%x\n",
+ seq_printf(m, "pld rev\t\t: 0x%x\n",
in_8(cpld_base + KATANA_CPLD_PLD_VER));
- seq_printf(m, "PLB freq\t: %ldMhz\n",
- (long)katana_bus_frequency / 1000000);
- seq_printf(m, "PCI\t\t: %sMonarch\n", katana_is_monarch()? "" : "Non-");
+
+ switch(bh.type) {
+ case MV64x60_TYPE_GT64260A:
+ s = "gt64260a";
+ break;
+ case MV64x60_TYPE_GT64260B:
+ s = "gt64260b";
+ break;
+ case MV64x60_TYPE_MV64360:
+ s = "mv64360";
+ break;
+ case MV64x60_TYPE_MV64460:
+ s = "mv64460";
+ break;
+ default:
+ s = "Unknown";
+ }
+ seq_printf(m, "bridge type\t: %s\n", s);
+ seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ seq_printf(m, "coherency\t: %s\n", "off");
+#else
+ seq_printf(m, "coherency\t: %s\n", "on");
+#endif
return 0;
}
tb_to_us = mulhwu_scale_factor(freq, 1000000);
}
+/*
+ * The katana supports both uImage and zImage. If uImage, get the mem size
+ * from the bd info. If zImage, the bootwrapper adds a BI_MEMSIZE entry in
+ * the bi_rec data which is sucked out and put into boot_mem_size by
+ * parse_bootinfo(). MMU_init() will then use the boot_mem_size for the mem
+ * size and not call this routine. The only way this will fail is when a uImage
+ * is used but the fw doesn't pass in a valid bi_memsize. This should never
+ * happen, though.
+ */
unsigned long __init
katana_find_end_of_memory(void)
{
- return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
- MV64x60_TYPE_MV64360);
+ bd_t *bdp = (bd_t *)__res;
+ return bdp->bi_memsize;
}
#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00)
late_initcall(katana_rtc_hookup);
#endif
-static inline void
-katana_set_bat(void)
-{
- mb();
- mtspr(SPRN_DBAT2U, 0xf0001ffe);
- mtspr(SPRN_DBAT2L, 0xf000002a);
- mb();
-}
-
#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
static void __init
katana_map_io(void)
*/
if (r3 && r6) {
/* copy board info structure */
- memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+ memcpy((void *)__res, (void *)(r3+KERNELBASE), sizeof(bd_t));
/* copy command line */
*(char *)(r7+KERNELBASE) = 0;
strcpy(cmd_line, (char *)(r6+KERNELBASE));
}
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* take care of initrd if we have one */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
isa_mem_base = 0;
ppc_md.setup_arch = katana_setup_arch;
+ ppc_md.pcibios_fixup_resources = katana_fixup_resources;
ppc_md.show_cpuinfo = katana_show_cpuinfo;
ppc_md.init_IRQ = mv64360_init_irq;
ppc_md.get_irq = mv64360_get_irq;
#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
platform_notify = katana_platform_notify;
#endif
-
- katana_set_bat(); /* Need for katana_find_end_of_memory and progress */
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff