--- /dev/null
+/*
+ * Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
+ *
+ * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "mt2131.h"
+#include "mt2131_priv.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(level,fmt, arg...) if (debug >= level) \
+ printk(KERN_INFO "%s: " fmt, "mt2131", ## arg)
+
+static u8 mt2131_config1[] = {
+ 0x01,
+ 0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88,
+ 0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32,
+ 0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80,
+ 0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00
+};
+
+static u8 mt2131_config2[] = {
+ 0x10,
+ 0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04
+};
+
+static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 },
+ { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 },
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "mt2131 I2C read failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val)
+{
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2 };
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2131 I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len)
+{
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len };
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n",(int)len);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mt2131_set_gpo(struct dvb_frontend *fe, u8 val)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ u8 v;
+
+ mt2131_readreg(priv, 0x07, &v);
+ mt2131_writereg(priv, 0x07, (v & 0xfe) | (val & 0x01));
+
+ return 0;
+}
+
+static int mt2131_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mt2131_priv *priv;
+ int ret=0, i;
+ u32 freq;
+ u8 if_band_center;
+ u32 f_lo1,f_lo2;
+ u32 div1,num1,div2,num2;
+ u8 b[8];
+ u8 lockval = 0;
+
+ priv = fe->tuner_priv;
+ if (fe->ops.info.type == FE_OFDM)
+ priv->bandwidth = params->u.ofdm.bandwidth;
+ else
+ priv->bandwidth = 0;
+
+ freq = params->frequency / 1000; // Hz -> kHz
+ dprintk(1, "%s() freq=%d\n", __FUNCTION__, freq);
+
+ f_lo1 = freq + MT2131_IF1 * 1000;
+ f_lo1 = (f_lo1 / 250) * 250;
+ f_lo2 = f_lo1 - freq - MT2131_IF2;
+
+ priv->frequency = (f_lo1 - f_lo2 - MT2131_IF2) * 1000,
+
+ /* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
+ num1 = f_lo1 * 64 / (MT2131_FREF / 128);
+ div1 = num1 / 8192;
+ num1 &= 0x1fff;
+
+ /* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */
+ num2 = f_lo2 * 64 / (MT2131_FREF / 128);
+ div2 = num2 / 8192;
+ num2 &= 0x1fff;
+
+ if (freq <= 82500) if_band_center = 0x00; else
+ if (freq <= 137500) if_band_center = 0x01; else
+ if (freq <= 192500) if_band_center = 0x02; else
+ if (freq <= 247500) if_band_center = 0x03; else
+ if (freq <= 302500) if_band_center = 0x04; else
+ if (freq <= 357500) if_band_center = 0x05; else
+ if (freq <= 412500) if_band_center = 0x06; else
+ if (freq <= 467500) if_band_center = 0x07; else
+ if (freq <= 522500) if_band_center = 0x08; else
+ if (freq <= 577500) if_band_center = 0x09; else
+ if (freq <= 632500) if_band_center = 0x0A; else
+ if (freq <= 687500) if_band_center = 0x0B; else
+ if (freq <= 742500) if_band_center = 0x0C; else
+ if (freq <= 797500) if_band_center = 0x0D; else
+ if (freq <= 852500) if_band_center = 0x0E; else
+ if (freq <= 907500) if_band_center = 0x0F; else
+ if (freq <= 962500) if_band_center = 0x10; else
+ if (freq <= 1017500) if_band_center = 0x11; else
+ if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13;
+
+ b[0] = 1;
+ b[1] = (num1 >> 5) & 0xFF;
+ b[2] = (num1 & 0x1F);
+ b[3] = div1;
+ b[4] = (num2 >> 5) & 0xFF;
+ b[5] = num2 & 0x1F;
+ b[6] = div2;
+
+ dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2);
+ dprintk(1, "PLL freq=%dkHz band=%d\n", (int)freq, (int)if_band_center);
+ dprintk(1, "PLL f_lo1=%dkHz f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2);
+ dprintk(1, "PLL div1=%d num1=%d div2=%d num2=%d\n",
+ (int)div1, (int)num1, (int)div2, (int)num2);
+ dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n",
+ (int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5],
+ (int)b[6]);
+
+ ret = mt2131_writeregs(priv,b,7);
+ if (ret < 0)
+ return ret;
+
+ mt2131_writereg(priv, 0x0b, if_band_center);
+
+ /* Wait for lock */
+ i = 0;
+ do {
+ mt2131_readreg(priv, 0x08, &lockval);
+ if ((lockval & 0x88) == 0x88)
+ break;
+ msleep(4);
+ i++;
+ } while (i < 10);
+
+ return ret;
+}
+
+static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ dprintk(1, "%s()\n", __FUNCTION__);
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int mt2131_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ dprintk(1, "%s()\n", __FUNCTION__);
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+static int mt2131_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ u8 lock_status = 0;
+ u8 afc_status = 0;
+
+ *status = 0;
+
+ mt2131_readreg(priv, 0x08, &lock_status);
+ if ((lock_status & 0x88) == 0x88)
+ *status = TUNER_STATUS_LOCKED;
+
+ mt2131_readreg(priv, 0x09, &afc_status);
+ dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n",
+ __FUNCTION__, lock_status, afc_status);
+
+ return 0;
+}
+
+static int mt2131_init(struct dvb_frontend *fe)
+{
+ struct mt2131_priv *priv = fe->tuner_priv;
+ int ret;
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ if ((ret = mt2131_writeregs(priv, mt2131_config1, sizeof(mt2131_config1))) < 0)
+ return ret;
+
+ mt2131_writereg(priv, 0x0b, 0x09);
+ mt2131_writereg(priv, 0x15, 0x47);
+ mt2131_writereg(priv, 0x07, 0xf2);
+ mt2131_writereg(priv, 0x0b, 0x01);
+
+ if ((ret = mt2131_writeregs(priv, mt2131_config2, sizeof(mt2131_config2))) < 0)
+ return ret;
+
+ return ret;
+}
+
+static int mt2131_release(struct dvb_frontend *fe)
+{
+ dprintk(1, "%s()\n", __FUNCTION__);
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops mt2131_tuner_ops = {
+ .info = {
+ .name = "Microtune MT2131",
+ .frequency_min = 48000000,
+ .frequency_max = 860000000,
+ .frequency_step = 50000,
+ },
+
+ .release = mt2131_release,
+ .init = mt2131_init,
+
+ .set_params = mt2131_set_params,
+ .get_frequency = mt2131_get_frequency,
+ .get_bandwidth = mt2131_get_bandwidth,
+ .get_status = mt2131_get_status
+};
+
+struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2131_config *cfg, u16 if1)
+{
+ struct mt2131_priv *priv = NULL;
+ u8 id = 0;
+
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->bandwidth = 6000000; /* 6MHz */
+ priv->i2c = i2c;
+
+ if (mt2131_readreg(priv, 0, &id) != 0) {
+ kfree(priv);
+ return NULL;
+ }
+ if ( (id != 0x3E) && (id != 0x3F) ) {
+ printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n", cfg->i2c_address);
+ kfree(priv);
+ return NULL;
+ }
+
+ printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n", cfg->i2c_address);
+ memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops, sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = priv;
+ return fe;
+}
+EXPORT_SYMBOL(mt2131_attach);
+
+MODULE_AUTHOR("Steven Toth");
+MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver");
+MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff