V4L/DVB (5062): SN9C102 driver updates
authorLuca Risolia <luca.risolia@studio.unibo.it>
Mon, 8 Jan 2007 13:43:56 +0000 (10:43 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 21 Feb 2007 15:34:19 +0000 (13:34 -0200)
- Add support for SN9C105 and SN9C120
- Add some more USB device identifiers
- Add support for OV7660
- Implement audio ioctl's and VIDIOC_ENUM_FRAMESIZES
- Add preliminary support for 0x0c45/0x6007
- Documentation updates
- Generic improvements
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 files changed:
Documentation/video4linux/sn9c102.txt
drivers/media/video/sn9c102/Kconfig
drivers/media/video/sn9c102/Makefile
drivers/media/video/sn9c102/sn9c102.h
drivers/media/video/sn9c102/sn9c102_config.h [new file with mode: 0644]
drivers/media/video/sn9c102/sn9c102_core.c
drivers/media/video/sn9c102/sn9c102_devtable.h [new file with mode: 0644]
drivers/media/video/sn9c102/sn9c102_hv7131d.c
drivers/media/video/sn9c102/sn9c102_mi0343.c
drivers/media/video/sn9c102/sn9c102_ov7630.c
drivers/media/video/sn9c102/sn9c102_ov7660.c [new file with mode: 0644]
drivers/media/video/sn9c102/sn9c102_pas106b.c
drivers/media/video/sn9c102/sn9c102_pas202bca.c [deleted file]
drivers/media/video/sn9c102/sn9c102_pas202bcb.c
drivers/media/video/sn9c102/sn9c102_sensor.h
drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
drivers/media/video/sn9c102/sn9c102_tas5130d1b.c

index 8cda472..2913da3 100644 (file)
@@ -1,5 +1,5 @@
 
-                        SN9C10x PC Camera Controllers
+                        SN9C1xx PC Camera Controllers
                                Driver for Linux
                         =============================
 
@@ -53,20 +53,14 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
 4. Overview and features
 ========================
-This driver attempts to support the video interface of the devices mounting the
-SONiX SN9C101, SN9C102 and SN9C103 PC Camera Controllers.
-
-It's worth to note that SONiX has never collaborated with the author during the
-development of this project, despite several requests for enough detailed
-specifications of the register tables, compression engine and video data format
-of the above chips. Nevertheless, these informations are no longer necessary,
-because all the aspects related to these chips are known and have been
-described in detail in this documentation.
+This driver attempts to support the video interface of the devices assembling
+the SONiX SN9C101, SN9C102, SN9C103, SN9C105 and SN9C120 PC Camera Controllers
+("SN9C1xx" from now on).
 
 The driver relies on the Video4Linux2 and USB core modules. It has been
 designed to run properly on SMP systems as well.
 
-The latest version of the SN9C10x driver can be found at the following URL:
+The latest version of the SN9C1xx driver can be found at the following URL:
 http://www.linux-projects.org/
 
 Some of the features of the driver are:
@@ -85,11 +79,11 @@ Some of the features of the driver are:
   high compression quality (see also "Notes for V4L2 application developers"
   and "Video frame formats" paragraphs);
 - full support for the capabilities of many of the possible image sensors that
-  can be connected to the SN9C10x bridges, including, for instance, red, green,
+  can be connected to the SN9C1xx bridges, including, for instance, red, green,
   blue and global gain adjustments and exposure (see "Supported devices"
   paragraph for details);
 - use of default color settings for sunlight conditions;
-- dynamic I/O interface for both SN9C10x and image sensor control and
+- dynamic I/O interface for both SN9C1xx and image sensor control and
   monitoring (see "Optional device control through 'sysfs'" paragraph);
 - dynamic driver control thanks to various module parameters (see "Module
   parameters" paragraph);
@@ -130,8 +124,8 @@ necessary:
        CONFIG_USB_UHCI_HCD=m
        CONFIG_USB_OHCI_HCD=m
 
-The SN9C103 controller also provides a built-in microphone interface. It is
-supported by the USB Audio driver thanks to the ALSA API:
+The SN9C103, SN9c105 and SN9C120 controllers also provide a built-in microphone
+interface. It is supported by the USB Audio driver thanks to the ALSA API:
 
        # Sound
        #
@@ -155,18 +149,27 @@ And finally:
 6. Module loading
 =================
 To use the driver, it is necessary to load the "sn9c102" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+after every other module required: "videodev", "v4l2_common", "compat_ioctl32",
+"usbcore" and, depending on the USB host controller you have, "ehci-hcd",
+"uhci-hcd" or "ohci-hcd".
 
 Loading can be done as shown below:
 
        [root@localhost home]# modprobe sn9c102
 
-At this point the devices should be recognized. You can invoke "dmesg" to
-analyze kernel messages and verify that the loading process has gone well:
+Note that the module is called "sn9c102" for historic reasons, althought it
+does not just support the SN9C102.
+
+At this point all the devices supported by the driver and connected to the USB
+ports should be recognized. You can invoke "dmesg" to analyze kernel messages
+and verify that the loading process has gone well:
 
        [user@localhost home]$ dmesg
 
+or, to isolate all the kernel messages generated by the driver:
+
+       [user@localhost home]$ dmesg | grep sn9c102
+
 
 7. Module parameters
 ====================
@@ -198,10 +201,11 @@ Default:        0
 -------------------------------------------------------------------------------
 Name:           frame_timeout
 Type:           uint array (min = 0, max = 64)
-Syntax:         <n[,...]>
-Description:    Timeout for a video frame in seconds. This parameter is
-               specific for each detected camera. This parameter can be
-               changed at runtime thanks to the /sys filesystem interface.
+Syntax:         <0|n[,...]>
+Description:    Timeout for a video frame in seconds before returning an I/O
+               error; 0 for infinity. This parameter is specific for each
+               detected camera and can be changed at runtime thanks to the
+               /sys filesystem interface.
 Default:        2
 -------------------------------------------------------------------------------
 Name:           debug
@@ -223,20 +227,21 @@ Default:        2
 8. Optional device control through "sysfs" [1]
 ==========================================
 If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
-it is possible to read and write both the SN9C10x and the image sensor
+it is possible to read and write both the SN9C1xx and the image sensor
 registers by using the "sysfs" filesystem interface.
 
 Every time a supported device is recognized, a write-only file named "green" is
 created in the /sys/class/video4linux/videoX directory. You can set the green
 channel's gain by writing the desired value to it. The value may range from 0
-to 15 for SN9C101 or SN9C102 bridges, from 0 to 127 for SN9C103 bridges.
-Similarly, only for SN9C103 controllers, blue and red gain control files are
-available in the same directory, for which accepted values may range from 0 to
-127.
+to 15 for the SN9C101 or SN9C102 bridges, from 0 to 127 for the SN9C103,
+SN9C105 and SN9C120 bridges.
+Similarly, only for the SN9C103, SN9C105 and SN9120 controllers, blue and red
+gain control files are available in the same directory, for which accepted
+values may range from 0 to 127.
 
 There are other four entries in the directory above for each registered camera:
 "reg", "val", "i2c_reg" and "i2c_val". The first two files control the
-SN9C10x bridge, while the other two control the sensor chip. "reg" and
+SN9C1xx bridge, while the other two control the sensor chip. "reg" and
 "i2c_reg" hold the values of the current register index where the following
 reading/writing operations are addressed at through "val" and "i2c_val". Their
 use is not intended for end-users. Note that "i2c_reg" and "i2c_val" will not
@@ -259,61 +264,84 @@ Now let's set the green gain's register of the SN9C101 or SN9C102 chips to 2:
        [root@localhost #] echo 0x11 > reg
        [root@localhost #] echo 2 > val
 
-Note that the SN9C10x always returns 0 when some of its registers are read.
+Note that the SN9C1xx always returns 0 when some of its registers are read.
 To avoid race conditions, all the I/O accesses to the above files are
 serialized.
-
 The sysfs interface also provides the "frame_header" entry, which exports the
 frame header of the most recent requested and captured video frame. The header
-is always 18-bytes long and is appended to every video frame by the SN9C10x
+is always 18-bytes long and is appended to every video frame by the SN9C1xx
 controllers. As an example, this additional information can be used by the user
 application for implementing auto-exposure features via software.
 
-The following table describes the frame header:
-
-Byte #  Value         Description
-------  -----         -----------
-0x00    0xFF          Frame synchronisation pattern.
-0x01    0xFF          Frame synchronisation pattern.
-0x02    0x00          Frame synchronisation pattern.
-0x03    0xC4          Frame synchronisation pattern.
-0x04    0xC4          Frame synchronisation pattern.
-0x05    0x96          Frame synchronisation pattern.
-0x06    0xXX          Unknown meaning. The exact value depends on the chip;
-                     possible values are 0x00, 0x01 and 0x20.
-0x07    0xXX          Variable value, whose bits are ff00uzzc, where ff is a
-                     frame counter, u is unknown, zz is a size indicator
-                     (00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
-                     "compression enabled" (1 = yes, 0 = no).
-0x08    0xXX          Brightness sum inside Auto-Exposure area (low-byte).
-0x09    0xXX          Brightness sum inside Auto-Exposure area (high-byte).
-                     For a pure white image, this number will be equal to 500
-                     times the area of the specified AE area. For images
-                     that are not pure white, the value scales down according
-                     to relative whiteness.
-0x0A    0xXX          Brightness sum outside Auto-Exposure area (low-byte).
-0x0B    0xXX          Brightness sum outside Auto-Exposure area (high-byte).
-                     For a pure white image, this number will be equal to 125
-                     times the area outside of the specified AE area. For
-                     images that are not pure white, the value scales down
-                     according to relative whiteness.
-                     according to relative whiteness.
-
-The following bytes are used by the SN9C103 bridge only:
-
-0x0C    0xXX          Unknown meaning
-0x0D    0xXX          Unknown meaning
-0x0E    0xXX          Unknown meaning
-0x0F    0xXX          Unknown meaning
-0x10    0xXX          Unknown meaning
-0x11    0xXX          Unknown meaning
+The following table describes the frame header exported by the SN9C101 and
+SN9C102:
+
+Byte #  Value or bits Description
+------  ------------- -----------
+0x00    0xFF          Frame synchronisation pattern
+0x01    0xFF          Frame synchronisation pattern
+0x02    0x00          Frame synchronisation pattern
+0x03    0xC4          Frame synchronisation pattern
+0x04    0xC4          Frame synchronisation pattern
+0x05    0x96          Frame synchronisation pattern
+0x06    [3:0]         Read channel gain control = (1+R_GAIN/8)
+       [7:4]         Blue channel gain control = (1+B_GAIN/8)
+0x07    [ 0 ]         Compression mode. 0=No compression, 1=Compression enabled
+       [2:1]         Maximum scale factor for compression
+       [ 3 ]         1 = USB fifo(2K bytes) is full
+       [ 4 ]         1 = Digital gain is finish
+       [ 5 ]         1 = Exposure is finish
+       [7:6]         Frame index
+0x08    [7:0]         Y sum inside Auto-Exposure area (low-byte)
+0x09    [7:0]         Y sum inside Auto-Exposure area (high-byte)
+                     where Y sum = (R/4 + 5G/16 + B/8) / 32
+0x0A    [7:0]         Y sum outside Auto-Exposure area (low-byte)
+0x0B    [7:0]         Y sum outside Auto-Exposure area (high-byte)
+                     where Y sum = (R/4 + 5G/16 + B/8) / 128
+0x0C    0xXX          Not used
+0x0D    0xXX          Not used
+0x0E    0xXX          Not used
+0x0F    0xXX          Not used
+0x10    0xXX          Not used
+0x11    0xXX          Not used
+
+The following table describes the frame header exported by the SN9C103:
+
+Byte #  Value or bits Description
+------  ------------- -----------
+0x00    0xFF          Frame synchronisation pattern
+0x01    0xFF          Frame synchronisation pattern
+0x02    0x00          Frame synchronisation pattern
+0x03    0xC4          Frame synchronisation pattern
+0x04    0xC4          Frame synchronisation pattern
+0x05    0x96          Frame synchronisation pattern
+0x06    [6:0]         Read channel gain control = (1/2+R_GAIN/64)
+0x07    [6:0]         Blue channel gain control = (1/2+B_GAIN/64)
+       [7:4]
+0x08    [ 0 ]         Compression mode. 0=No compression, 1=Compression enabled
+       [2:1]         Maximum scale factor for compression
+       [ 3 ]         1 = USB fifo(2K bytes) is full
+       [ 4 ]         1 = Digital gain is finish
+       [ 5 ]         1 = Exposure is finish
+       [7:6]         Frame index
+0x09    [7:0]         Y sum inside Auto-Exposure area (low-byte)
+0x0A    [7:0]         Y sum inside Auto-Exposure area (high-byte)
+                     where Y sum = (R/4 + 5G/16 + B/8) / 32
+0x0B    [7:0]         Y sum outside Auto-Exposure area (low-byte)
+0x0C    [7:0]         Y sum outside Auto-Exposure area (high-byte)
+                     where Y sum = (R/4 + 5G/16 + B/8) / 128
+0x0D    [1:0]         Audio frame number
+       [ 2 ]         1 = Audio is recording
+0x0E    [7:0]         Audio summation (low-byte)
+0x0F    [7:0]         Audio summation (high-byte)
+0x10    [7:0]         Audio sample count
+0x11    [7:0]         Audio peak data in audio frame
 
 The AE area (sx, sy, ex, ey) in the active window can be set by programming the
-registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C10x controllers, where one unit
+registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C1xx controllers, where one unit
 corresponds to 32 pixels.
 
-[1] Part of the meaning of the frame header has been documented by Bertrik
-    Sikken.
+[1] The frame headers exported by the SN9C105 and SN9C120 are not described.
 
 
 9. Supported devices
@@ -323,15 +351,19 @@ here. They have never collaborated with the author, so no advertising.
 
 From the point of view of a driver, what unambiguously identify a device are
 its vendor and product USB identifiers. Below is a list of known identifiers of
-devices mounting the SN9C10x PC camera controllers:
+devices assembling the SN9C1xx PC camera controllers:
 
 Vendor ID  Product ID
 ---------  ----------
+0x0471     0x0327
+0x0471     0x0328
 0x0c45     0x6001
 0x0c45     0x6005
 0x0c45     0x6007
 0x0c45     0x6009
 0x0c45     0x600d
+0x0c45     0x6011
+0x0c45     0x6019
 0x0c45     0x6024
 0x0c45     0x6025
 0x0c45     0x6028
@@ -342,6 +374,7 @@ Vendor ID  Product ID
 0x0c45     0x602d
 0x0c45     0x602e
 0x0c45     0x6030
+0x0c45     0x603f
 0x0c45     0x6080
 0x0c45     0x6082
 0x0c45     0x6083
@@ -368,24 +401,40 @@ Vendor ID  Product ID
 0x0c45     0x60bb
 0x0c45     0x60bc
 0x0c45     0x60be
+0x0c45     0x60c0
+0x0c45     0x60c8
+0x0c45     0x60cc
+0x0c45     0x60ea
+0x0c45     0x60ec
+0x0c45     0x60fa
+0x0c45     0x60fb
+0x0c45     0x60fc
+0x0c45     0x60fe
+0x0c45     0x6130
+0x0c45     0x613a
+0x0c45     0x613b
+0x0c45     0x613c
+0x0c45     0x613e
 
 The list above does not imply that all those devices work with this driver: up
-until now only the ones that mount the following image sensors are supported;
-kernel messages will always tell you whether this is the case:
+until now only the ones that assemble the following image sensors are
+supported; kernel messages will always tell you whether this is the case (see
+"Module loading" paragraph):
 
 Model       Manufacturer
 -----       ------------
 HV7131D     Hynix Semiconductor, Inc.
 MI-0343     Micron Technology, Inc.
 OV7630      OmniVision Technologies, Inc.
+OV7660      OmniVision Technologies, Inc.
 PAS106B     PixArt Imaging, Inc.
 PAS202BCA   PixArt Imaging, Inc.
 PAS202BCB   PixArt Imaging, Inc.
 TAS5110C1B  Taiwan Advanced Sensor Corporation
 TAS5130D1B  Taiwan Advanced Sensor Corporation
 
-All the available control settings of each image sensor are supported through
-the V4L2 interface.
+Some of the available control settings of each image sensor are supported
+through the V4L2 interface.
 
 Donations of new models for further testing and support would be much
 appreciated. Non-available hardware will not be supported by the author of this
@@ -429,12 +478,15 @@ supplied by this driver).
 
 11. Video frame formats [1]
 =======================
-The SN9C10x PC Camera Controllers can send images in two possible video
-formats over the USB: either native "Sequential RGB Bayer" or Huffman
-compressed. The latter is used to achieve high frame rates. The current video
-format may be selected or queried from the user application by calling the
-VIDIOC_S_FMT or VIDIOC_G_FMT ioctl's, as described in the V4L2 API
-specifications.
+The SN9C1xx PC Camera Controllers can send images in two possible video
+formats over the USB: either native "Sequential RGB Bayer" or compressed.
+The compression is used to achieve high frame rates. With regard to the
+SN9C101, SN9C102 and SN9C103, the compression is based on the Huffman encoding
+algorithm described below, while the SN9C105 and SN9C120 the compression is
+based on the JPEG standard.
+The current video format may be selected or queried from the user application
+by calling the VIDIOC_S_FMT or VIDIOC_G_FMT ioctl's, as described in the V4L2
+API specifications.
 
 The name "Sequential Bayer" indicates the organization of the red, green and
 blue pixels in one video frame. Each pixel is associated with a 8-bit long
@@ -447,14 +499,14 @@ G[m]   R[m+1]  G[m+2]  R[m+2]  ...   G[2m-2]        R[2m-1]
 ...                                  G[n(m-2)]      R[n(m-1)]
 
 The above matrix also represents the sequential or progressive read-out mode of
-the (n, m) Bayer color filter array used in many CCD/CMOS image sensors.
+the (n, m) Bayer color filter array used in many CCD or CMOS image sensors.
 
-One compressed video frame consists of a bitstream that encodes for every R, G,
-or B pixel the difference between the value of the pixel itself and some
-reference pixel value. Pixels are organised in the Bayer pattern and the Bayer
-sub-pixels are tracked individually and alternatingly. For example, in the
-first line values for the B and G1 pixels are alternatingly encoded, while in
-the second line values for the G2 and R pixels are alternatingly encoded.
+The Huffman compressed video frame consists of a bitstream that encodes for
+every R, G, or B pixel the difference between the value of the pixel itself and
+some reference pixel value. Pixels are organised in the Bayer pattern and the
+Bayer sub-pixels are tracked individually and alternatingly. For example, in
+the first line values for the B and G1 pixels are alternatingly encoded, while
+in the second line values for the G2 and R pixels are alternatingly encoded.
 
 The pixel reference value is calculated as follows:
 - the 4 top left pixels are encoded in raw uncompressed 8-bit format;
@@ -470,8 +522,9 @@ The pixel reference value is calculated as follows:
   decoding.
 
 The algorithm purely describes the conversion from compressed Bayer code used
-in the SN9C10x chips to uncompressed Bayer. Additional steps are required to
-convert this to a color image (i.e. a color interpolation algorithm).
+in the SN9C101, SN9C102 and SN9C103 chips to uncompressed Bayer. Additional
+steps are required to convert this to a color image (i.e. a color interpolation
+algorithm).
 
 The following Huffman codes have been found:
 0: +0 (relative to reference pixel value)
@@ -506,13 +559,18 @@ order):
 - Philippe Coval for having helped testing the PAS202BCA image sensor;
 - Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
   donation of a webcam;
+- Dennis Heitmann for the donation of a webcam;
 - Jon Hollstrom for the donation of a webcam;
+- Nick McGill for the donation of a webcam;
 - Carlos Eduardo Medaglia Dyonisio, who added the support for the PAS202BCB
   image sensor;
 - Stefano Mozzi, who donated 45 EU;
 - Andrew Pearce for the donation of a webcam;
+- John Pullan for the donation of a webcam;
 - Bertrik Sikken, who reverse-engineered and documented the Huffman compression
-  algorithm used in the SN9C10x controllers and implemented the first decoder;
+  algorithm used in the SN9C101, SN9C102 and SN9C103 controllers and
+  implemented the first decoder;
 - Mizuno Takafumi for the donation of a webcam;
 - an "anonymous" donator (who didn't want his name to be revealed) for the
   donation of a webcam.
+- an anonymous donator for the donation of four webcams.
index cf552e6..1a7ccb6 100644 (file)
@@ -1,9 +1,9 @@
 config USB_SN9C102
-       tristate "USB SN9C10x PC Camera Controller support"
+       tristate "USB SN9C1xx PC Camera Controller support"
        depends on USB && VIDEO_V4L1
        ---help---
          Say Y here if you want support for cameras based on SONiX SN9C101,
-         SN9C102 or SN9C103 PC Camera Controllers.
+         SN9C102, SN9C103, SN9C105 and SN9C120 PC Camera Controllers.
 
          See <file:Documentation/video4linux/sn9c102.txt> for more info.
 
index 536ad30..30e3dfe 100644 (file)
@@ -1,5 +1,5 @@
 sn9c102-objs    := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \
-                  sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \
+                  sn9c102_ov7630.o sn9c102_ov7660.o sn9c102_pas106b.o \
                   sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
                   sn9c102_tas5130d1b.o
 
index 2c6ff39..5428f34 100644 (file)
@@ -1,5 +1,5 @@
 /***************************************************************************
- * V4L2 driver for SN9C10x PC Camera Controllers                           *
+ * V4L2 driver for SN9C1xx PC Camera Controllers                           *
  *                                                                         *
  * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
 #include <linux/string.h>
 #include <linux/stddef.h>
 
+#include "sn9c102_config.h"
 #include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
 
-/*****************************************************************************/
-
-#define SN9C102_DEBUG
-#define SN9C102_DEBUG_LEVEL       2
-#define SN9C102_MAX_DEVICES       64
-#define SN9C102_PRESERVE_IMGSCALE 0
-#define SN9C102_FORCE_MUNMAP      0
-#define SN9C102_MAX_FRAMES        32
-#define SN9C102_URBS              2
-#define SN9C102_ISO_PACKETS       7
-#define SN9C102_ALTERNATE_SETTING 8
-#define SN9C102_URB_TIMEOUT       msecs_to_jiffies(2 * SN9C102_ISO_PACKETS)
-#define SN9C102_CTRL_TIMEOUT      300
-#define SN9C102_FRAME_TIMEOUT     2
-
-/*****************************************************************************/
-
-enum sn9c102_bridge {
-       BRIDGE_SN9C101 = 0x01,
-       BRIDGE_SN9C102 = 0x02,
-       BRIDGE_SN9C103 = 0x04,
-};
-
-SN9C102_ID_TABLE
-SN9C102_SENSOR_TABLE
 
 enum sn9c102_frame_state {
        F_UNUSED,
@@ -99,13 +76,11 @@ enum sn9c102_stream_state {
        STREAM_ON,
 };
 
-typedef char sn9c103_sof_header_t[18];
-typedef char sn9c102_sof_header_t[12];
-typedef char sn9c102_eof_header_t[4];
+typedef char sn9c102_sof_header_t[62];
 
 struct sn9c102_sysfs_attr {
        u8 reg, i2c_reg;
-       sn9c103_sof_header_t frame_header;
+       sn9c102_sof_header_t frame_header;
 };
 
 struct sn9c102_module_param {
@@ -137,8 +112,8 @@ struct sn9c102_device {
        struct v4l2_jpegcompression compression;
 
        struct sn9c102_sysfs_attr sysfs;
-       sn9c103_sof_header_t sof_header;
-       u16 reg[63];
+       sn9c102_sof_header_t sof_header;
+       u16 reg[384];
 
        struct sn9c102_module_param module_param;
 
@@ -155,10 +130,7 @@ struct sn9c102_device {
 struct sn9c102_device*
 sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id)
 {
-       if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
-               return cam;
-
-       return NULL;
+       return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL;
 }
 
 
@@ -169,6 +141,19 @@ sn9c102_attach_sensor(struct sn9c102_device* cam,
        memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor));
 }
 
+
+enum sn9c102_bridge
+sn9c102_get_bridge(struct sn9c102_device* cam)
+{
+       return cam->bridge;
+}
+
+
+struct sn9c102_sensor* sn9c102_get_sensor(struct sn9c102_device* cam)
+{
+       return &cam->sensor;
+}
+
 /*****************************************************************************/
 
 #undef DBG
diff --git a/drivers/media/video/sn9c102/sn9c102_config.h b/drivers/media/video/sn9c102/sn9c102_config.h
new file mode 100644 (file)
index 0000000..0f4e037
--- /dev/null
@@ -0,0 +1,86 @@
+/***************************************************************************
+ * Global parameters for the V4L2 driver for SN9C1xx PC Camera Controllers *
+ *                                                                         *
+ * Copyright (C) 2007 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _SN9C102_CONFIG_H_
+#define _SN9C102_CONFIG_H_
+
+#include <linux/types.h>
+#include <linux/jiffies.h>
+
+#define SN9C102_DEBUG
+#define SN9C102_DEBUG_LEVEL       2
+#define SN9C102_MAX_DEVICES       64
+#define SN9C102_PRESERVE_IMGSCALE 0
+#define SN9C102_FORCE_MUNMAP      0
+#define SN9C102_MAX_FRAMES        32
+#define SN9C102_URBS              2
+#define SN9C102_ISO_PACKETS       7
+#define SN9C102_ALTERNATE_SETTING 8
+#define SN9C102_URB_TIMEOUT       msecs_to_jiffies(2 * SN9C102_ISO_PACKETS)
+#define SN9C102_CTRL_TIMEOUT      300
+#define SN9C102_FRAME_TIMEOUT     0
+
+/*****************************************************************************/
+
+static const u8 SN9C102_Y_QTABLE0[64] = {
+        8,   5,   5,   8,  12,  20,  25,  30,
+        6,   6,   7,   9,  13,  29,  30,  27,
+        7,   6,   8,  12,  20,  28,  34,  28,
+        7,   8,  11,  14,  25,  43,  40,  31,
+        9,  11,  18,  28,  34,  54,  51,  38,
+       12,  17,  27,  32,  40,  52,  56,  46,
+       24,  32,  39,  43,  51,  60,  60,  50,
+       36,  46,  47,  49,  56,  50,  51,  49
+};
+
+static const u8 SN9C102_UV_QTABLE0[64] = {
+        8,   9,  12,  23,  49,  49,  49,  49,
+        9,  10,  13,  33,  49,  49,  49,  49,
+       12,  13,  28,  49,  49,  49,  49,  49,
+       23,  33,  49,  49,  49,  49,  49,  49,
+       49,  49,  49,  49,  49,  49,  49,  49,
+       49,  49,  49,  49,  49,  49,  49,  49,
+       49,  49,  49,  49,  49,  49,  49,  49,
+       49,  49,  49,  49,  49,  49,  49,  49
+};
+
+static const u8 SN9C102_Y_QTABLE1[64] = {
+       16,  11,  10,  16,  24,  40,  51,  61,
+       12,  12,  14,  19,  26,  58,  60,  55,
+       14,  13,  16,  24,  40,  57,  69,  56,
+       14,  17,  22,  29,  51,  87,  80,  62,
+       18,  22,  37,  56,  68, 109, 103,  77,
+       24,  35,  55,  64,  81, 104, 113,  92,
+       49,  64,  78,  87, 103, 121, 120, 101,
+       72,  92,  95,  98, 112, 100, 103,  99
+};
+
+static const u8 SN9C102_UV_QTABLE1[64] = {
+       17,  18,  24,  47,  99,  99,  99,  99,
+       18,  21,  26,  66,  99,  99,  99,  99,
+       24,  26,  56,  99,  99,  99,  99,  99,
+       47,  66,  99,  99,  99,  99,  99,  99,
+       99,  99,  99,  99,  99,  99,  99,  99,
+       99,  99,  99,  99,  99,  99,  99,  99,
+       99,  99,  99,  99,  99,  99,  99,  99,
+       99,  99,  99,  99,  99,  99,  99,  99
+};
+
+#endif /* _SN9C102_CONFIG_H_ */
index 04d4c8f..d0e2b40 100644 (file)
@@ -1,7 +1,7 @@
 /***************************************************************************
- * V4L2 driver for SN9C10x PC Camera Controllers                           *
+ * V4L2 driver for SN9C1xx PC Camera Controllers                           *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
 
 /*****************************************************************************/
 
-#define SN9C102_MODULE_NAME     "V4L2 driver for SN9C10x PC Camera Controllers"
+#define SN9C102_MODULE_NAME     "V4L2 driver for SN9C1xx PC Camera Controllers"
 #define SN9C102_MODULE_AUTHOR   "(C) 2004-2006 Luca Risolia"
 #define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
 #define SN9C102_MODULE_LICENSE  "GPL"
-#define SN9C102_MODULE_VERSION  "1:1.27"
-#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 27)
+#define SN9C102_MODULE_VERSION  "1:1.34"
+#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 34)
 
 /*****************************************************************************/
 
@@ -91,7 +91,8 @@ static unsigned int frame_timeout[] = {[0 ... SN9C102_MAX_DEVICES-1] =
                                       SN9C102_FRAME_TIMEOUT};
 module_param_array(frame_timeout, uint, NULL, 0644);
 MODULE_PARM_DESC(frame_timeout,
-                "\n<n[,...]> Timeout for a video frame in seconds."
+                "\n<0|n[,...]> Timeout for a video frame in seconds before"
+                "\nreturning an I/O error; 0 for infinity."
                 "\nThis parameter is specific for each detected camera."
                 "\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"."
                 "\n");
@@ -113,32 +114,13 @@ MODULE_PARM_DESC(debug,
 
 /*****************************************************************************/
 
-static sn9c102_sof_header_t sn9c102_sof_header[] = {
-       {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x00},
-       {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01},
-};
-
-static sn9c103_sof_header_t sn9c103_sof_header[] = {
-       {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20},
-};
-
-static sn9c102_eof_header_t sn9c102_eof_header[] = {
-       {0x00, 0x00, 0x00, 0x00},
-       {0x40, 0x00, 0x00, 0x00},
-       {0x80, 0x00, 0x00, 0x00},
-       {0xc0, 0x00, 0x00, 0x00},
-};
-
-/*****************************************************************************/
-
 static u32
 sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
                        enum sn9c102_io_method io)
 {
        struct v4l2_pix_format* p = &(cam->sensor.pix_format);
        struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
-       const size_t imagesize = cam->module_param.force_munmap ||
-                                io == IO_READ ?
+       size_t imagesize = cam->module_param.force_munmap || io == IO_READ ?
                                 (p->width * p->height * p->priv) / 8 :
                                 (r->width * r->height * p->priv) / 8;
        void* buff = NULL;
@@ -147,9 +129,13 @@ sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
        if (count > SN9C102_MAX_FRAMES)
                count = SN9C102_MAX_FRAMES;
 
+       if (cam->bridge == BRIDGE_SN9C105 || cam->bridge == BRIDGE_SN9C120)
+               imagesize += 589 + 2; /* length of JPEG header + EOI marker */
+
        cam->nbuffers = count;
        while (cam->nbuffers > 0) {
-               if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+               if ((buff = vmalloc_32_user(cam->nbuffers *
+                                           PAGE_ALIGN(imagesize))))
                        break;
                cam->nbuffers--;
        }
@@ -322,9 +308,21 @@ static int
 sn9c102_i2c_detect_read_error(struct sn9c102_device* cam,
                              struct sn9c102_sensor* sensor)
 {
-       int r;
+       int r , err = 0;
+
        r = sn9c102_read_reg(cam, 0x08);
-       return (r < 0 || (r >= 0 && !(r & 0x08))) ? -EIO : 0;
+       if (r < 0)
+               err += r;
+
+       if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) {
+               if (!(r & 0x08))
+                       err += -1;
+       } else {
+               if (r & 0x08)
+                       err += -1;
+       }
+
+       return err ? -EIO : 0;
 }
 
 
@@ -415,7 +413,7 @@ sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
        data[4] = data3;
        data[5] = data4;
        data[6] = data5;
-       data[7] = 0x14;
+       data[7] = 0x17;
        res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
                              0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
        if (res < 0)
@@ -467,31 +465,35 @@ int sn9c102_i2c_write(struct sn9c102_device* cam, u8 address, u8 value)
 
 /*****************************************************************************/
 
-static void*
-sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
+static size_t sn9c102_sof_length(struct sn9c102_device* cam)
 {
-       size_t soflen = 0, i;
-       u8 j, n = 0;
-
        switch (cam->bridge) {
        case BRIDGE_SN9C101:
        case BRIDGE_SN9C102:
-               soflen = sizeof(sn9c102_sof_header_t);
-               n = sizeof(sn9c102_sof_header) / soflen;
-               break;
+               return 12;
        case BRIDGE_SN9C103:
-               soflen = sizeof(sn9c103_sof_header_t);
-               n = sizeof(sn9c103_sof_header) / soflen;
+               return 18;
+       case BRIDGE_SN9C105:
+       case BRIDGE_SN9C120:
+               return 62;
        }
 
+       return 0;
+}
+
+
+static void*
+sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
+{
+       char sof_header[6] = {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
+       size_t soflen = 0, i;
+
+       soflen = sn9c102_sof_length(cam);
+
        for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
-               for (j = 0; j < n; j++)
-                       /* The invariable part of the header is 6 bytes long */
-                       if ((cam->bridge != BRIDGE_SN9C103 &&
-                           !memcmp(mem + i, sn9c102_sof_header[j], 6)) ||
-                           (cam->bridge == BRIDGE_SN9C103 &&
-                           !memcmp(mem + i, sn9c103_sof_header[j], 6))) {
-                               memcpy(cam->sof_header, mem + i, soflen);
+               if (!memcmp(mem + i, sof_header, sizeof(sof_header))) {
+                       memcpy(cam->sof_header, mem + i,
+                              sizeof(sn9c102_sof_header_t));
                                /* Skip the header */
                                return mem + i + soflen;
                        }
@@ -503,21 +505,123 @@ sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
 static void*
 sn9c102_find_eof_header(struct sn9c102_device* cam, void* mem, size_t len)
 {
-       size_t eoflen = sizeof(sn9c102_eof_header_t), i;
-       unsigned j, n = sizeof(sn9c102_eof_header) / eoflen;
+       char eof_header[4][4] = {
+               {0x00, 0x00, 0x00, 0x00},
+               {0x40, 0x00, 0x00, 0x00},
+               {0x80, 0x00, 0x00, 0x00},
+               {0xc0, 0x00, 0x00, 0x00},
+       };
+       size_t i, j;
 
-       if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
+       if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X ||
+           cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_JPEG)
                return NULL; /* EOF header does not exist in compressed data */
 
-       for (i = 0; (len >= eoflen) && (i <= len - eoflen); i++)
-               for (j = 0; j < n; j++)
-                       if (!memcmp(mem + i, sn9c102_eof_header[j], eoflen))
+       for (i = 0; (len >= 4) && (i <= len - 4); i++)
+               for (j = 0; j < ARRAY_SIZE(eof_header); j++)
+                       if (!memcmp(mem + i, eof_header[j], 4))
                                return mem + i;
 
        return NULL;
 }
 
 
+static void
+sn9c102_write_jpegheader(struct sn9c102_device* cam, struct sn9c102_frame_t* f)
+{
+       static u8 jpeg_header[589] = {
+               0xff, 0xd8, 0xff, 0xdb, 0x00, 0x84, 0x00, 0x06, 0x04, 0x05,
+               0x06, 0x05, 0x04, 0x06, 0x06, 0x05, 0x06, 0x07, 0x07, 0x06,
+               0x08, 0x0a, 0x10, 0x0a, 0x0a, 0x09, 0x09, 0x0a, 0x14, 0x0e,
+               0x0f, 0x0c, 0x10, 0x17, 0x14, 0x18, 0x18, 0x17, 0x14, 0x16,
+               0x16, 0x1a, 0x1d, 0x25, 0x1f, 0x1a, 0x1b, 0x23, 0x1c, 0x16,
+               0x16, 0x20, 0x2c, 0x20, 0x23, 0x26, 0x27, 0x29, 0x2a, 0x29,
+               0x19, 0x1f, 0x2d, 0x30, 0x2d, 0x28, 0x30, 0x25, 0x28, 0x29,
+               0x28, 0x01, 0x07, 0x07, 0x07, 0x0a, 0x08, 0x0a, 0x13, 0x0a,
+               0x0a, 0x13, 0x28, 0x1a, 0x16, 0x1a, 0x28, 0x28, 0x28, 0x28,
+               0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+               0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+               0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+               0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+               0x28, 0x28, 0x28, 0x28, 0x28, 0x28, 0xff, 0xc4, 0x01, 0xa2,
+               0x00, 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+               0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02,
+               0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x01,
+               0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+               0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03,
+               0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x10, 0x00,
+               0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, 0x05, 0x05, 0x04,
+               0x04, 0x00, 0x00, 0x01, 0x7d, 0x01, 0x02, 0x03, 0x00, 0x04,
+               0x11, 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
+               0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, 0x23,
+               0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, 0x24, 0x33, 0x62,
+               0x72, 0x82, 0x09, 0x0a, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x25,
+               0x26, 0x27, 0x28, 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38,
+               0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a,
+               0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0x63, 0x64,
+               0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76,
+               0x77, 0x78, 0x79, 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
+               0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
+               0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa,
+               0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2,
+               0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3,
+               0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, 0xe3,
+               0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, 0xf1, 0xf2, 0xf3,
+               0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0x11, 0x00, 0x02,
+               0x01, 0x02, 0x04, 0x04, 0x03, 0x04, 0x07, 0x05, 0x04, 0x04,
+               0x00, 0x01, 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
+               0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
+               0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, 0xa1, 0xb1,
+               0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, 0x15, 0x62, 0x72, 0xd1,
+               0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19,
+               0x1a, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38,
+               0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a,
+               0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0x63, 0x64,
+               0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76,
+               0x77, 0x78, 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+               0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
+               0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9,
+               0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba,
+               0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2,
+               0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe2, 0xe3,
+               0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, 0xf2, 0xf3, 0xf4,
+               0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0xff, 0xc0, 0x00, 0x11,
+               0x08, 0x01, 0xe0, 0x02, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02,
+               0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda, 0x00, 0x0c, 0x03,
+               0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+       };
+       u8 *pos = f->bufmem;
+
+       memcpy(pos, jpeg_header, sizeof(jpeg_header));
+       *(pos + 6) = 0x00;
+       *(pos + 7 + 64) = 0x01;
+       if (cam->compression.quality == 0) {
+               memcpy(pos + 7, SN9C102_Y_QTABLE0, 64);
+               memcpy(pos + 8 + 64, SN9C102_UV_QTABLE0, 64);
+       } else if (cam->compression.quality == 1) {
+               memcpy(pos + 7, SN9C102_Y_QTABLE1, 64);
+               memcpy(pos + 8 + 64, SN9C102_UV_QTABLE1, 64);
+       }
+       *(pos + 564) = cam->sensor.pix_format.width & 0xFF;
+       *(pos + 563) = (cam->sensor.pix_format.width >> 8) & 0xFF;
+       *(pos + 562) = cam->sensor.pix_format.height & 0xFF;
+       *(pos + 561) = (cam->sensor.pix_format.height >> 8) & 0xFF;
+       *(pos + 567) = 0x21;
+
+       f->buf.bytesused += sizeof(jpeg_header);
+}
+
+
+static void
+sn9c102_write_eoimarker(struct sn9c102_device* cam, struct sn9c102_frame_t* f)
+{
+       static const u8 eoi_marker[2] = {0xff, 0xd9};
+
+       memcpy(f->bufmem + f->buf.bytesused, eoi_marker, sizeof(eoi_marker));
+       f->buf.bytesused += sizeof(eoi_marker);
+}
+
+
 static void sn9c102_urb_complete(struct urb *urb)
 {
        struct sn9c102_device* cam = urb->context;
@@ -535,7 +639,7 @@ static void sn9c102_urb_complete(struct urb *urb)
                cam->stream = STREAM_OFF;
                if ((*f))
                        (*f)->state = F_QUEUED;
-               DBG(3, "Stream interrupted");
+               DBG(3, "Stream interrupted by application");
                wake_up(&cam->wait_stream);
        }
 
@@ -557,10 +661,9 @@ static void sn9c102_urb_complete(struct urb *urb)
        imagesize = (cam->sensor.pix_format.width *
                     cam->sensor.pix_format.height *
                     cam->sensor.pix_format.priv) / 8;
-
-       soflen = (cam->bridge) == BRIDGE_SN9C103 ?
-                                 sizeof(sn9c103_sof_header_t) :
-                                 sizeof(sn9c102_sof_header_t);
+       if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_JPEG)
+               imagesize += 589; /* length of jpeg header */
+       soflen = sn9c102_sof_length(cam);
 
        for (i = 0; i < urb->number_of_packets; i++) {
                unsigned int img, len, status;
@@ -610,12 +713,21 @@ end_of_frame:
                                (*f)->buf.bytesused += img;
 
                                if ((*f)->buf.bytesused == imagesize ||
-                                   (cam->sensor.pix_format.pixelformat ==
-                                               V4L2_PIX_FMT_SN9C10X && eof)) {
+                                   ((cam->sensor.pix_format.pixelformat ==
+                                     V4L2_PIX_FMT_SN9C10X ||
+                                     cam->sensor.pix_format.pixelformat ==
+                                     V4L2_PIX_FMT_JPEG) && eof)) {
                                        u32 b;
+
+                                       if (cam->sensor.pix_format.pixelformat
+                                           == V4L2_PIX_FMT_JPEG)
+                                               sn9c102_write_eoimarker(cam,
+                                                                       (*f));
+
                                        b = (*f)->buf.bytesused;
                                        (*f)->state = F_DONE;
                                        (*f)->buf.sequence= ++cam->frame_count;
+
                                        spin_lock(&cam->queue_lock);
                                        list_move_tail(&(*f)->frame,
                                                       &cam->outqueue);
@@ -627,8 +739,10 @@ end_of_frame:
                                        else
                                                (*f) = NULL;
                                        spin_unlock(&cam->queue_lock);
+
                                        memcpy(cam->sysfs.frame_header,
                                               cam->sof_header, soflen);
+
                                        DBG(3, "Video frame captured: %lu "
                                               "bytes", (unsigned long)(b));
 
@@ -661,6 +775,9 @@ start_of_frame:
                        (*f)->buf.bytesused = 0;
                        len -= (sof - pos);
                        pos = sof;
+                       if (cam->sensor.pix_format.pixelformat ==
+                           V4L2_PIX_FMT_JPEG)
+                               sn9c102_write_jpegheader(cam, (*f));
                        DBG(3, "SOF detected: new video frame");
                        if (len)
                                goto redo;
@@ -671,7 +788,9 @@ start_of_frame:
                                goto end_of_frame; /* (1) */
                        else {
                                if (cam->sensor.pix_format.pixelformat ==
-                                   V4L2_PIX_FMT_SN9C10X) {
+                                   V4L2_PIX_FMT_SN9C10X ||
+                                   cam->sensor.pix_format.pixelformat ==
+                                   V4L2_PIX_FMT_JPEG) {
                                        eof = sof - soflen;
                                        goto end_of_frame;
                                } else {
@@ -701,13 +820,11 @@ static int sn9c102_start_transfer(struct sn9c102_device* cam)
 {
        struct usb_device *udev = cam->usbdev;
        struct urb* urb;
-       const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512,
-                                                      680, 800, 900, 1023};
-       const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512,
-                                                      680, 800, 900, 1003};
-       const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ?
-                           sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
-                           sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
+       struct usb_host_interface* altsetting = usb_altnum_to_altsetting(
+                                                   usb_ifnum_to_if(udev, 0),
+                                                   SN9C102_ALTERNATE_SETTING);
+       const unsigned int psz = le16_to_cpu(altsetting->
+                                            endpoint[0].desc.wMaxPacketSize);
        s8 i, j;
        int err = 0;
 
@@ -775,7 +892,7 @@ static int sn9c102_start_transfer(struct sn9c102_device* cam)
        return 0;
 
 free_urbs:
-       for (i = 0; i < SN9C102_URBS; i++)
+       for (i = 0; (i < SN9C102_URBS) && cam->urb[i]; i++)
                usb_free_urb(cam->urb[i]);
 
 free_buffers:
@@ -834,29 +951,29 @@ static int sn9c102_stream_interrupt(struct sn9c102_device* cam)
 /*****************************************************************************/
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count)
+static u16 sn9c102_strtou16(const char* buff, size_t len, ssize_t* count)
 {
-       char str[5];
+       char str[7];
        char* endp;
        unsigned long val;
 
-       if (len < 4) {
+       if (len < 6) {
                strncpy(str, buff, len);
                str[len+1] = '\0';
        } else {
                strncpy(str, buff, 4);
-               str[4] = '\0';
+               str[6] = '\0';
        }
 
        val = simple_strtoul(str, &endp, 0);
 
        *count = 0;
-       if (val <= 0xff)
+       if (val <= 0xffff)
                *count = (ssize_t)(endp - str);
        if ((*count) && (len == *count+1) && (buff[*count] == '\n'))
                *count += 1;
 
-       return (u8)val;
+       return (u16)val;
 }
 
 /*
@@ -873,7 +990,8 @@ static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf)
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
@@ -891,27 +1009,28 @@ static ssize_t
 sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
 {
        struct sn9c102_device* cam;
-       u8 index;
+       u16 index;
        ssize_t count;
 
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
        }
 
-       index = sn9c102_strtou8(buf, len, &count);
-       if (index > 0x1f || !count) {
+       index = sn9c102_strtou16(buf, len, &count);
+       if (index >= ARRAY_SIZE(cam->reg) || !count) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -EINVAL;
        }
 
        cam->sysfs.reg = index;
 
-       DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg);
+       DBG(2, "Moved SN9C1XX register index to 0x%02X", cam->sysfs.reg);
        DBG(3, "Written bytes: %zd", count);
 
        mutex_unlock(&sn9c102_sysfs_lock);
@@ -929,7 +1048,8 @@ static ssize_t sn9c102_show_val(struct class_device* cd, char* buf)
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
@@ -954,20 +1074,21 @@ static ssize_t
 sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
 {
        struct sn9c102_device* cam;
-       u8 value;
+       u16 value;
        ssize_t count;
        int err;
 
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
        }
 
-       value = sn9c102_strtou8(buf, len, &count);
+       value = sn9c102_strtou16(buf, len, &count);
        if (!count) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -EINVAL;
@@ -979,7 +1100,7 @@ sn9c102_store_val(struct class_device* cd, const char* buf, size_t len)
                return -EIO;
        }
 
-       DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X",
+       DBG(2, "Written SN9C1XX reg. 0x%02X, val. 0x%02X",
            cam->sysfs.reg, value);
        DBG(3, "Written bytes: %zd", count);
 
@@ -997,7 +1118,8 @@ static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf)
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
@@ -1017,19 +1139,20 @@ static ssize_t
 sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
 {
        struct sn9c102_device* cam;
-       u8 index;
+       u16 index;
        ssize_t count;
 
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
        }
 
-       index = sn9c102_strtou8(buf, len, &count);
+       index = sn9c102_strtou16(buf, len, &count);
        if (!count) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -EINVAL;
@@ -1055,7 +1178,8 @@ static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf)
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
@@ -1085,14 +1209,15 @@ static ssize_t
 sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
 {
        struct sn9c102_device* cam;
-       u8 value;
+       u16 value;
        ssize_t count;
        int err;
 
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
@@ -1103,7 +1228,7 @@ sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
                return -ENOSYS;
        }
 
-       value = sn9c102_strtou8(buf, len, &count);
+       value = sn9c102_strtou16(buf, len, &count);
        if (!count) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -EINVAL;
@@ -1131,13 +1256,14 @@ sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
        struct sn9c102_device* cam;
        enum sn9c102_bridge bridge;
        ssize_t res = 0;
-       u8 value;
+       u16 value;
        ssize_t count;
 
        if (mutex_lock_interruptible(&sn9c102_sysfs_lock))
                return -ERESTARTSYS;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam) {
                mutex_unlock(&sn9c102_sysfs_lock);
                return -ENODEV;
@@ -1147,7 +1273,7 @@ sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
 
        mutex_unlock(&sn9c102_sysfs_lock);
 
-       value = sn9c102_strtou8(buf, len, &count);
+       value = sn9c102_strtou16(buf, len, &count);
        if (!count)
                return -EINVAL;
 
@@ -1160,9 +1286,11 @@ sn9c102_store_green(struct class_device* cd, const char* buf, size_t len)
                        res = sn9c102_store_val(cd, buf, len);
                break;
        case BRIDGE_SN9C103:
+       case BRIDGE_SN9C105:
+       case BRIDGE_SN9C120:
                if (value > 0x7f)
                        return -EINVAL;
-               if ((res = sn9c102_store_reg(cd, "0x04", 4)) >= 0)
+               if ((res = sn9c102_store_reg(cd, "0x07", 4)) >= 0)
                        res = sn9c102_store_val(cd, buf, len);
                break;
        }
@@ -1175,10 +1303,10 @@ static ssize_t
 sn9c102_store_blue(struct class_device* cd, const char* buf, size_t len)
 {
        ssize_t res = 0;
-       u8 value;
+       u16 value;
        ssize_t count;
 
-       value = sn9c102_strtou8(buf, len, &count);
+       value = sn9c102_strtou16(buf, len, &count);
        if (!count || value > 0x7f)
                return -EINVAL;
 
@@ -1193,10 +1321,10 @@ static ssize_t
 sn9c102_store_red(struct class_device* cd, const char* buf, size_t len)
 {
        ssize_t res = 0;
-       u8 value;
+       u16 value;
        ssize_t count;
 
-       value = sn9c102_strtou8(buf, len, &count);
+       value = sn9c102_strtou16(buf, len, &count);
        if (!count || value > 0x7f)
                return -EINVAL;
 
@@ -1212,7 +1340,8 @@ static ssize_t sn9c102_show_frame_header(struct class_device* cd, char* buf)
        struct sn9c102_device* cam;
        ssize_t count;
 
-       cam = video_get_drvdata(to_video_device(cd));
+       cam = video_get_drvdata(container_of(cd, struct video_device,
+                                            class_dev));
        if (!cam)
                return -ENODEV;
 
@@ -1243,30 +1372,36 @@ static CLASS_DEVICE_ATTR(frame_header, S_IRUGO,
 static int sn9c102_create_sysfs(struct sn9c102_device* cam)
 {
        struct video_device *v4ldev = cam->v4ldev;
-       int rc;
+       int err = 0;
 
-       rc = video_device_create_file(v4ldev, &class_device_attr_reg);
-       if (rc) goto err;
-       rc = video_device_create_file(v4ldev, &class_device_attr_val);
-       if (rc) goto err_reg;
-       rc = video_device_create_file(v4ldev, &class_device_attr_frame_header);
-       if (rc) goto err_val;
+       if ((err = video_device_create_file(v4ldev, &class_device_attr_reg)))
+               goto err_out;
+       if ((err = video_device_create_file(v4ldev, &class_device_attr_val)))
+               goto err_reg;
+       if ((err = video_device_create_file(v4ldev,
+                                           &class_device_attr_frame_header)))
+               goto err_val;
 
        if (cam->sensor.sysfs_ops) {
-               rc = video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
-               if (rc) goto err_frhead;
-               rc = video_device_create_file(v4ldev, &class_device_attr_i2c_val);
-               if (rc) goto err_i2c_reg;
+               if ((err = video_device_create_file(v4ldev,
+                                                 &class_device_attr_i2c_reg)))
+                       goto err_frame_header;
+               if ((err = video_device_create_file(v4ldev,
+                                                 &class_device_attr_i2c_val)))
+                       goto err_i2c_reg;
        }
 
        if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) {
-               rc = video_device_create_file(v4ldev, &class_device_attr_green);
-               if (rc) goto err_i2c_val;
-       } else if (cam->bridge == BRIDGE_SN9C103) {
-               rc = video_device_create_file(v4ldev, &class_device_attr_blue);
-               if (rc) goto err_i2c_val;
-               rc = video_device_create_file(v4ldev, &class_device_attr_red);
-               if (rc) goto err_blue;
+               if ((err = video_device_create_file(v4ldev,
+                                                   &class_device_attr_green)))
+                       goto err_i2c_val;
+       } else {
+               if ((err = video_device_create_file(v4ldev,
+                                                   &class_device_attr_blue)))
+                       goto err_i2c_val;
+               if ((err = video_device_create_file(v4ldev,
+                                                   &class_device_attr_red)))
+                       goto err_blue;
        }
 
        return 0;
@@ -1279,14 +1414,14 @@ err_i2c_val:
 err_i2c_reg:
        if (cam->sensor.sysfs_ops)
                video_device_remove_file(v4ldev, &class_device_attr_i2c_reg);
-err_frhead:
+err_frame_header:
        video_device_remove_file(v4ldev, &class_device_attr_frame_header);
 err_val:
        video_device_remove_file(v4ldev, &class_device_attr_val);
 err_reg:
        video_device_remove_file(v4ldev, &class_device_attr_reg);
-err:
-       return rc;
+err_out:
+       return err;
 }
 #endif /* CONFIG_VIDEO_ADV_DEBUG */
 
@@ -1297,10 +1432,36 @@ sn9c102_set_pix_format(struct sn9c102_device* cam, struct v4l2_pix_format* pix)
 {
        int err = 0;
 
-       if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
-               err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x80, 0x18);
-       else
-               err += sn9c102_write_reg(cam, cam->reg[0x18] & 0x7f, 0x18);
+       if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X ||
+           pix->pixelformat == V4L2_PIX_FMT_JPEG) {
+               switch (cam->bridge) {
+               case BRIDGE_SN9C101:
+               case BRIDGE_SN9C102:
+               case BRIDGE_SN9C103:
+                       err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x80,
+                                                0x18);
+                       break;
+               case BRIDGE_SN9C105:
+               case BRIDGE_SN9C120:
+                       err += sn9c102_write_reg(cam, cam->reg[0x18] & 0x7f,
+                                                0x18);
+                       break;
+               }
+       } else {
+               switch (cam->bridge) {
+               case BRIDGE_SN9C101:
+               case BRIDGE_SN9C102:
+               case BRIDGE_SN9C103:
+                       err += sn9c102_write_reg(cam, cam->reg[0x18] & 0x7f,
+                                                0x18);
+                       break;
+               case BRIDGE_SN9C105:
+               case BRIDGE_SN9C120:
+                       err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x80,
+                                                0x18);
+                       break;
+               }
+       }
 
        return err ? -EIO : 0;
 }
@@ -1310,12 +1471,46 @@ static int
 sn9c102_set_compression(struct sn9c102_device* cam,
                        struct v4l2_jpegcompression* compression)
 {
-       int err = 0;
+       int i, err = 0;
 
+       switch (cam->bridge) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
+       case BRIDGE_SN9C103:
        if (compression->quality == 0)
-               err += sn9c102_write_reg(cam, cam->reg[0x17] | 0x01, 0x17);
+                       err += sn9c102_write_reg(cam, cam->reg[0x17] | 0x01,
+                                                0x17);
        else if (compression->quality == 1)
-               err += sn9c102_write_reg(cam, cam->reg[0x17] & 0xfe, 0x17);
+                       err += sn9c102_write_reg(cam, cam->reg[0x17] & 0xfe,
+                                                0x17);
+               break;
+       case BRIDGE_SN9C105:
+       case BRIDGE_SN9C120:
+               if (compression->quality == 0) {
+                       for (i = 0; i <= 63; i++) {
+                               err += sn9c102_write_reg(cam,
+                                                        SN9C102_Y_QTABLE0[i],
+                                                        0x100 + i);
+                               err += sn9c102_write_reg(cam,
+                                                        SN9C102_UV_QTABLE0[i],
+                                                        0x140 + i);
+                       }
+                       err += sn9c102_write_reg(cam, cam->reg[0x18] & 0xbf,
+                                                0x18);
+               } else if (compression->quality == 1) {
+                       for (i = 0; i <= 63; i++) {
+                               err += sn9c102_write_reg(cam,
+                                                        SN9C102_Y_QTABLE1[i],
+                                                        0x100 + i);
+                               err += sn9c102_write_reg(cam,
+                                                        SN9C102_UV_QTABLE1[i],
+                                                        0x140 + i);
+                       }
+                       err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x40,
+                                                0x18);
+               }
+               break;
+       }
 
        return err ? -EIO : 0;
 }
@@ -1399,7 +1594,16 @@ static int sn9c102_init(struct sn9c102_device* cam)
        }
 
        if (!(cam->state & DEV_INITIALIZED))
-               cam->compression.quality =  cam->reg[0x17] & 0x01 ? 0 : 1;
+               if (cam->bridge == BRIDGE_SN9C101 ||
+                   cam->bridge == BRIDGE_SN9C102 ||
+                   cam->bridge == BRIDGE_SN9C103) {
+                       cam->compression.quality =  cam->reg[0x17] & 0x01 ?
+                                                   0 : 1;
+               } else {
+                       cam->compression.quality =  cam->reg[0x18] & 0x40 ?
+                                                   0 : 1;
+                       err += sn9c102_set_compression(cam, &cam->compression);
+               }
        else
                err += sn9c102_set_compression(cam, &cam->compression);
        err += sn9c102_set_pix_format(cam, &s->pix_format);
@@ -1408,7 +1612,8 @@ static int sn9c102_init(struct sn9c102_device* cam)
        if (err)
                return err;
 
-       if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
+       if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X ||
+           s->pix_format.pixelformat == V4L2_PIX_FMT_JPEG)
                DBG(3, "Compressed video format is active, quality %d",
                    cam->compression.quality);
        else
@@ -1490,6 +1695,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp)
 
        if (cam->users) {
                DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+               DBG(3, "Simultaneous opens are not supported");
                if ((filp->f_flags & O_NONBLOCK) ||
                    (filp->f_flags & O_NDELAY)) {
                        err = -EWOULDBLOCK;
@@ -1628,6 +1834,17 @@ sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
                        mutex_unlock(&cam->fileop_mutex);
                        return -EAGAIN;
                }
+               if (!cam->module_param.frame_timeout) {
+                       err = wait_event_interruptible
+                             ( cam->wait_frame,
+                               (!list_empty(&cam->outqueue)) ||
+                               (cam->state & DEV_DISCONNECTED) ||
+                               (cam->state & DEV_MISCONFIGURED) );
+                       if (err) {
+                               mutex_unlock(&cam->fileop_mutex);
+                               return err;
+                       }
+               } else {
                timeout = wait_event_interruptible_timeout
                          ( cam->wait_frame,
                            (!list_empty(&cam->outqueue)) ||
@@ -1638,12 +1855,18 @@ sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
                if (timeout < 0) {
                        mutex_unlock(&cam->fileop_mutex);
                        return timeout;
+                       } else if (timeout == 0 &&
+                                  !(cam->state & DEV_DISCONNECTED)) {
+                               DBG(1, "Video frame timeout elapsed");
+                               mutex_unlock(&cam->fileop_mutex);
+                               return -EIO;
+                       }
                }
                if (cam->state & DEV_DISCONNECTED) {
                        mutex_unlock(&cam->fileop_mutex);
                        return -ENODEV;
                }
-               if (!timeout || (cam->state & DEV_MISCONFIGURED)) {
+               if (cam->state & DEV_MISCONFIGURED) {
                        mutex_unlock(&cam->fileop_mutex);
                        return -EIO;
                }
@@ -1940,6 +2163,9 @@ exit:
        if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
                return -EFAULT;
 
+       PDBGG("VIDIOC_G_CTRL: id %lu, value %lu",
+             (unsigned long)ctrl.id, (unsigned long)ctrl.value);
+
        return err;
 }
 
@@ -2127,6 +2353,45 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
 
 
 static int
+sn9c102_vidioc_enum_framesizes(struct sn9c102_device* cam, void __user * arg)
+{
+       struct v4l2_frmsizeenum frmsize;
+
+       if (copy_from_user(&frmsize, arg, sizeof(frmsize)))
+               return -EFAULT;
+
+       if (frmsize.index != 0)
+               return -EINVAL;
+
+       switch (cam->bridge) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
+       case BRIDGE_SN9C103:
+               if (frmsize.pixel_format != V4L2_PIX_FMT_SN9C10X &&
+                   frmsize.pixel_format != V4L2_PIX_FMT_SBGGR8)
+                       return -EINVAL;
+       case BRIDGE_SN9C105:
+       case BRIDGE_SN9C120:
+               if (frmsize.pixel_format != V4L2_PIX_FMT_JPEG &&
+                   frmsize.pixel_format != V4L2_PIX_FMT_SBGGR8)
+                       return -EINVAL;
+       }
+
+       frmsize.type = V4L2_FRMSIZE_TYPE_STEPWISE;
+       frmsize.stepwise.min_width = frmsize.stepwise.step_width = 16;
+       frmsize.stepwise.min_height = frmsize.stepwise.step_height = 16;
+       frmsize.stepwise.max_width = cam->sensor.cropcap.bounds.width;
+       frmsize.stepwise.max_height = cam->sensor.cropcap.bounds.height;
+       memset(&frmsize.reserved, 0, sizeof(frmsize.reserved));
+
+       if (copy_to_user(arg, &frmsize, sizeof(frmsize)))
+               return -EFAULT;
+
+       return 0;
+}
+
+
+static int
 sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg)
 {
        struct v4l2_fmtdesc fmtd;
@@ -2134,12 +2399,26 @@ sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg)
        if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
                return -EFAULT;
 
+       if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+               return -EINVAL;
+
        if (fmtd.index == 0) {
                strcpy(fmtd.description, "bayer rgb");
                fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
        } else if (fmtd.index == 1) {
+               switch (cam->bridge) {
+               case BRIDGE_SN9C101:
+               case BRIDGE_SN9C102:
+               case BRIDGE_SN9C103:
                strcpy(fmtd.description, "compressed");
                fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
+                       break;
+               case BRIDGE_SN9C105:
+               case BRIDGE_SN9C120:
+                       strcpy(fmtd.description, "JPEG");
+                       fmtd.pixelformat = V4L2_PIX_FMT_JPEG;
+                       break;
+               }
                fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
        } else
                return -EINVAL;
@@ -2166,7 +2445,8 @@ sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg)
        if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
                return -EINVAL;
 
-       pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
+       pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X ||
+                             pfmt->pixelformat==V4L2_PIX_FMT_JPEG)
                             ? 0 : (pfmt->width * pfmt->priv) / 8;
        pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
        pfmt->field = V4L2_FIELD_NONE;
@@ -2237,12 +2517,25 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
        pix->width = rect.width / scale;
        pix->height = rect.height / scale;
 
+       switch (cam->bridge) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
+       case BRIDGE_SN9C103:
        if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
            pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
                pix->pixelformat = pfmt->pixelformat;
+               break;
+       case BRIDGE_SN9C105:
+       case BRIDGE_SN9C120:
+               if (pix->pixelformat != V4L2_PIX_FMT_JPEG &&
+                   pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+                       pix->pixelformat = pfmt->pixelformat;
+               break;
+       }
        pix->priv = pfmt->priv; /* bpp */
        pix->colorspace = pfmt->colorspace;
-       pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+       pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X ||
+                            pix->pixelformat == V4L2_PIX_FMT_JPEG)
                            ? 0 : (pix->width * pix->priv) / 8;
        pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
        pix->field = V4L2_FIELD_NONE;
@@ -2315,8 +2608,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
 static int
 sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg)
 {
-       if (copy_to_user(arg, &cam->compression,
-                        sizeof(cam->compression)))
+       if (copy_to_user(arg, &cam->compression, sizeof(cam->compression)))
                return -EFAULT;
 
        return 0;
@@ -2471,6 +2763,7 @@ sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
        struct sn9c102_frame_t *f;
        unsigned long lock_flags;
        long timeout;
+       int err = 0;
 
        if (copy_from_user(&b, arg, sizeof(b)))
                return -EFAULT;
@@ -2483,6 +2776,15 @@ sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
                        return -EINVAL;
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;
+               if (!cam->module_param.frame_timeout) {
+                       err = wait_event_interruptible
+                             ( cam->wait_frame,
+                               (!list_empty(&cam->outqueue)) ||
+                               (cam->state & DEV_DISCONNECTED) ||
+                               (cam->state & DEV_MISCONFIGURED) );
+                       if (err)
+                               return err;
+               } else {
                timeout = wait_event_interruptible_timeout
                          ( cam->wait_frame,
                            (!list_empty(&cam->outqueue)) ||
@@ -2492,9 +2794,15 @@ sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
                            1000 * msecs_to_jiffies(1) );
                if (timeout < 0)
                        return timeout;
+                       else if (timeout == 0 &&
+                                !(cam->state & DEV_DISCONNECTED)) {
+                               DBG(1, "Video frame timeout elapsed");
+                               return -EIO;
+                       }
+               }
                if (cam->state & DEV_DISCONNECTED)
                        return -ENODEV;
-               if (!timeout || (cam->state & DEV_MISCONFIGURED))
+               if (cam->state & DEV_MISCONFIGURED)
                        return -EIO;
        }
 
@@ -2612,6 +2920,70 @@ sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg)
 }
 
 
+static int
+sn9c102_vidioc_enumaudio(struct sn9c102_device* cam, void __user * arg)
+{
+       struct v4l2_audio audio;
+
+       if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102)
+               return -EINVAL;
+
+       if (copy_from_user(&audio, arg, sizeof(audio)))
+               return -EFAULT;
+
+       if (audio.index != 0)
+               return -EINVAL;
+
+       strcpy(audio.name, "Microphone");
+       audio.capability = 0;
+       audio.mode = 0;
+
+       if (copy_to_user(arg, &audio, sizeof(audio)))
+               return -EFAULT;
+
+       return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_audio(struct sn9c102_device* cam, void __user * arg)
+{
+       struct v4l2_audio audio;
+
+       if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102)
+               return -EINVAL;
+
+       if (copy_from_user(&audio, arg, sizeof(audio)))
+               return -EFAULT;
+
+       memset(&audio, 0, sizeof(audio));
+       strcpy(audio.name, "Microphone");
+
+       if (copy_to_user(arg, &audio, sizeof(audio)))
+               return -EFAULT;
+
+       return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_audio(struct sn9c102_device* cam, void __user * arg)
+{
+       struct v4l2_audio audio;
+
+       if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102)
+               return -EINVAL;
+
+       if (copy_from_user(&audio, arg, sizeof(audio)))
+               return -EFAULT;
+
+       if (audio.index != 0)
+               return -EINVAL;
+
+       return 0;
+}
+
+
 static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
                              unsigned int cmd, void __user * arg)
 {
@@ -2649,6 +3021,9 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
        case VIDIOC_S_CROP:
                return sn9c102_vidioc_s_crop(cam, arg);
 
+       case VIDIOC_ENUM_FRAMESIZES:
+               return sn9c102_vidioc_enum_framesizes(cam, arg);
+
        case VIDIOC_ENUM_FMT:
                return sn9c102_vidioc_enum_fmt(cam, arg);
 
@@ -2689,11 +3064,21 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
        case VIDIOC_S_PARM:
                return sn9c102_vidioc_s_parm(cam, arg);
 
+       case VIDIOC_ENUMAUDIO:
+               return sn9c102_vidioc_enumaudio(cam, arg);
+
+       case VIDIOC_G_AUDIO:
+               return sn9c102_vidioc_g_audio(cam, arg);
+
+       case VIDIOC_S_AUDIO:
+               return sn9c102_vidioc_s_audio(cam, arg);
+
        case VIDIOC_G_STD:
        case VIDIOC_S_STD:
        case VIDIOC_QUERYSTD:
        case VIDIOC_ENUMSTD:
        case VIDIOC_QUERYMENU:
+       case VIDIOC_ENUM_FRAMEINTERVALS:
                return -EINVAL;
 
        default:
@@ -2741,6 +3126,7 @@ static const struct file_operations sn9c102_fops = {
        .open =    sn9c102_open,
        .release = sn9c102_release,
        .ioctl =   sn9c102_ioctl,
+       .compat_ioctl = v4l_compat_ioctl32,
        .read =    sn9c102_read,
        .poll =    sn9c102_poll,
        .mmap =    sn9c102_mmap,
@@ -2765,7 +3151,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
        cam->usbdev = udev;
 
        if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
-               DBG(1, "kmalloc() failed");
+               DBG(1, "kzalloc() failed");
                err = -ENOMEM;
                goto fail;
        }
@@ -2779,24 +3165,31 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
        mutex_init(&cam->dev_mutex);
 
        r = sn9c102_read_reg(cam, 0x00);
-       if (r < 0 || r != 0x10) {
-               DBG(1, "Sorry, this is not a SN9C10x based camera "
-                      "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
+       if (r < 0 || (r != 0x10 && r != 0x11 && r != 0x12)) {
+               DBG(1, "Sorry, this is not a SN9C1xx based camera "
+                      "(vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
                err = -ENODEV;
                goto fail;
        }
 
-       cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ?
-                     BRIDGE_SN9C103 : BRIDGE_SN9C102;
+       cam->bridge = id->driver_info;
        switch (cam->bridge) {
        case BRIDGE_SN9C101:
        case BRIDGE_SN9C102:
                DBG(2, "SN9C10[12] PC Camera Controller detected "
-                      "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
+                      "(vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
                break;
        case BRIDGE_SN9C103:
                DBG(2, "SN9C103 PC Camera Controller detected "
-                      "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
+                      "(vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+               break;
+       case BRIDGE_SN9C105:
+               DBG(2, "SN9C105 PC Camera Controller detected "
+                      "(vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+               break;
+       case BRIDGE_SN9C120:
+               DBG(2, "SN9C120 PC Camera Controller detected "
+                      "(vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
                break;
        }
 
@@ -2816,12 +3209,18 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
                goto fail;
        }
 
+       if (!(cam->bridge & cam->sensor.supported_bridge)) {
+               DBG(1, "Bridge not supported");
+               err = -ENODEV;
+               goto fail;
+       }
+
        if (sn9c102_init(cam)) {
                DBG(1, "Initialization failed. I will retry on open().");
                cam->state |= DEV_MISCONFIGURED;
        }
 
-       strcpy(cam->v4ldev->name, "SN9C10x PC Camera");
+       strcpy(cam->v4ldev->name, "SN9C1xx PC Camera");
        cam->v4ldev->owner = THIS_MODULE;
        cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
        cam->v4ldev->hardware = 0;
@@ -2838,7 +3237,10 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
                DBG(1, "V4L2 device registration failed");
                if (err == -ENFILE && video_nr[dev_nr] == -1)
                        DBG(1, "Free /dev/videoX node not found");
-               goto fail2;
+               video_nr[dev_nr] = -1;
+               dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
+               mutex_unlock(&cam->dev_mutex);
+               goto fail;
        }
 
        DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
@@ -2850,9 +3252,14 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
        err = sn9c102_create_sysfs(cam);
-       if (err)
-               goto fail3;
-       DBG(2, "Optional device control through 'sysfs' interface ready");
+       if (!err)
+               DBG(2, "Optional device control through 'sysfs' "
+                      "interface ready");
+       else
+               DBG(2, "Failed to create optional 'sysfs' interface for "
+                      "device controlling. Error #%d", err);
+#else
+       DBG(2, "Optional device control through 'sysfs' interface disabled");
 #endif
 
        usb_set_intfdata(intf, cam);
@@ -2861,14 +3268,6 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 
        return 0;
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-fail3:
-       video_unregister_device(cam->v4ldev);
-#endif
-fail2:
-       video_nr[dev_nr] = -1;
-       dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
-       mutex_unlock(&cam->dev_mutex);
 fail:
        if (cam) {
                kfree(cam->control_buffer);
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
new file mode 100644 (file)
index 0000000..3a682ec
--- /dev/null
@@ -0,0 +1,142 @@
+/***************************************************************************
+ * Table of device identifiers of the SN9C1xx PC Camera Controllers        *
+ *                                                                         *
+ * Copyright (C) 2007 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _SN9C102_DEVTABLE_H_
+#define _SN9C102_DEVTABLE_H_
+
+#include <linux/usb.h>
+
+struct sn9c102_device;
+
+/*
+   Each SN9C1xx camera has proper PID/VID identifiers.
+   SN9C103, SN9C105, SN9C120 support multiple interfaces, but we only have to
+   handle the video class interface.
+*/
+#define SN9C102_USB_DEVICE(vend, prod, bridge)                                \
+       .match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
+                      USB_DEVICE_ID_MATCH_INT_CLASS,                         \
+       .idVendor = (vend),                                                   \
+       .idProduct = (prod),                                                  \
+       .bInterfaceClass = 0xff,                                              \
+       .driver_info = (bridge)
+
+static const struct usb_device_id sn9c102_id_table[] = {
+       /* SN9C101 and SN9C102 */
+       { SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6028, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x603f, BRIDGE_SN9C102), },
+       /* SN9C103 */
+       { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60ba, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), },
+       /* SN9C105 */
+       { SN9C102_USB_DEVICE(0x0471, 0x0327, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0471, 0x0328, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60c0, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60c8, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60cc, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60ea, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60ec, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), },
+       /* SN9C120 */
+       { SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), },
+       { SN9C102_USB_DEVICE(0x0c45, 0x613e, BRIDGE_SN9C120), },
+       { }
+};
+
+/*
+   Probing functions: on success, you must attach the sensor to the camera
+   by calling sn9c102_attach_sensor().
+   To enable the I2C communication, you might need to perform a really basic
+   initialization of the SN9C1XX chip.
+   Functions must return 0 on success, the appropriate error otherwise.
+*/
+extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
+extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
+extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
+extern int sn9c102_probe_ov7660(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
+extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
+
+/*
+   Add the above entries to this table. Be sure to add the entry in the right
+   place, since, on failure, the next probing routine is called according to
+   the order of the list below, from top to bottom.
+*/
+static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {
+       &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */
+       &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */
+       &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */
+       &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */
+       &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */
+       &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */
+       &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */
+       &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */
+       NULL,
+};
+
+#endif /* _SN9C102_DEVTABLE_H_ */
index c4117bf..7ae368f 100644 (file)
@@ -1,8 +1,8 @@
 /***************************************************************************
- * Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera     *
+ * Plug-in for HV7131D image sensor connected to the SN9C1xx PC Camera     *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -124,7 +124,7 @@ static int hv7131d_set_ctrl(struct sn9c102_device* cam,
 static int hv7131d_set_crop(struct sn9c102_device* cam,
                            const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &hv7131d;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        int err = 0;
        u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 2,
           v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2;
@@ -153,6 +153,7 @@ static int hv7131d_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor hv7131d = {
        .name = "HV7131D",
        .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
        .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
        .frequency = SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_2WIRES,
index 4169ea4..a33d1bc 100644 (file)
@@ -1,8 +1,8 @@
 /***************************************************************************
- * Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera     *
+ * Plug-in for MI-0343 image sensor connected to the SN9C1xx PC Camera     *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -201,7 +201,7 @@ static int mi0343_set_ctrl(struct sn9c102_device* cam,
 static int mi0343_set_crop(struct sn9c102_device* cam,
                            const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &mi0343;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        int err = 0;
        u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 0,
           v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2;
@@ -237,6 +237,7 @@ static int mi0343_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor mi0343 = {
        .name = "MI-0343",
        .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
        .frequency = SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_2WIRES,
        .i2c_slave_id = 0x5d,
index 3da0420..7df09ff 100644 (file)
@@ -1,8 +1,8 @@
 /***************************************************************************
- * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera      *
+ * Plug-in for OV7630 image sensor connected to the SN9C1xx PC Camera      *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -29,13 +29,17 @@ static int ov7630_init(struct sn9c102_device* cam)
 {
        int err = 0;
 
+       switch (sn9c102_get_bridge(cam)) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
        err += sn9c102_write_reg(cam, 0x00, 0x14);
        err += sn9c102_write_reg(cam, 0x60, 0x17);
        err += sn9c102_write_reg(cam, 0x0f, 0x18);
        err += sn9c102_write_reg(cam, 0x50, 0x19);
 
-       err += sn9c102_i2c_write(cam, 0x12, 0x80);
-       err += sn9c102_i2c_write(cam, 0x11, 0x01);
+               err += sn9c102_i2c_write(cam, 0x12, 0x8d);
+               err += sn9c102_i2c_write(cam, 0x12, 0x0d);
+               err += sn9c102_i2c_write(cam, 0x11, 0x00);
        err += sn9c102_i2c_write(cam, 0x15, 0x34);
        err += sn9c102_i2c_write(cam, 0x16, 0x03);
        err += sn9c102_i2c_write(cam, 0x17, 0x1c);
@@ -43,14 +47,72 @@ static int ov7630_init(struct sn9c102_device* cam)
        err += sn9c102_i2c_write(cam, 0x19, 0x06);
        err += sn9c102_i2c_write(cam, 0x1a, 0xf6);
        err += sn9c102_i2c_write(cam, 0x1b, 0x04);
-       err += sn9c102_i2c_write(cam, 0x20, 0xf6);
+               err += sn9c102_i2c_write(cam, 0x20, 0x44);
+               err += sn9c102_i2c_write(cam, 0x23, 0xee);
+               err += sn9c102_i2c_write(cam, 0x26, 0xa0);
+               err += sn9c102_i2c_write(cam, 0x27, 0x9a);
+               err += sn9c102_i2c_write(cam, 0x28, 0x20);
+               err += sn9c102_i2c_write(cam, 0x29, 0x30);
+               err += sn9c102_i2c_write(cam, 0x2f, 0x3d);
+               err += sn9c102_i2c_write(cam, 0x30, 0x24);
+               err += sn9c102_i2c_write(cam, 0x32, 0x86);
+               err += sn9c102_i2c_write(cam, 0x60, 0xa9);
+               err += sn9c102_i2c_write(cam, 0x61, 0x42);
+               err += sn9c102_i2c_write(cam, 0x65, 0x00);
+               err += sn9c102_i2c_write(cam, 0x69, 0x38);
+               err += sn9c102_i2c_write(cam, 0x6f, 0x88);
+               err += sn9c102_i2c_write(cam, 0x70, 0x0b);
+               err += sn9c102_i2c_write(cam, 0x71, 0x00);
+               err += sn9c102_i2c_write(cam, 0x74, 0x21);
+               err += sn9c102_i2c_write(cam, 0x7d, 0xf7);
+               break;
+       case BRIDGE_SN9C103:
+               err += sn9c102_write_reg(cam, 0x00, 0x02);
+               err += sn9c102_write_reg(cam, 0x00, 0x03);
+               err += sn9c102_write_reg(cam, 0x1a, 0x04);
+               err += sn9c102_write_reg(cam, 0x20, 0x05);
+               err += sn9c102_write_reg(cam, 0x20, 0x06);
+               err += sn9c102_write_reg(cam, 0x20, 0x07);
+               err += sn9c102_write_reg(cam, 0x03, 0x10);
+               err += sn9c102_write_reg(cam, 0x0a, 0x14);
+               err += sn9c102_write_reg(cam, 0x60, 0x17);
+               err += sn9c102_write_reg(cam, 0x0f, 0x18);
+               err += sn9c102_write_reg(cam, 0x50, 0x19);
+               err += sn9c102_write_reg(cam, 0x1d, 0x1a);
+               err += sn9c102_write_reg(cam, 0x10, 0x1b);
+               err += sn9c102_write_reg(cam, 0x02, 0x1c);
+               err += sn9c102_write_reg(cam, 0x03, 0x1d);
+               err += sn9c102_write_reg(cam, 0x0f, 0x1e);
+               err += sn9c102_write_reg(cam, 0x0c, 0x1f);
+               err += sn9c102_write_reg(cam, 0x00, 0x20);
+               err += sn9c102_write_reg(cam, 0x10, 0x21);
+               err += sn9c102_write_reg(cam, 0x20, 0x22);
+               err += sn9c102_write_reg(cam, 0x30, 0x23);
+               err += sn9c102_write_reg(cam, 0x40, 0x24);
+               err += sn9c102_write_reg(cam, 0x50, 0x25);
+               err += sn9c102_write_reg(cam, 0x60, 0x26);
+               err += sn9c102_write_reg(cam, 0x70, 0x27);
+               err += sn9c102_write_reg(cam, 0x80, 0x28);
+               err += sn9c102_write_reg(cam, 0x90, 0x29);
+               err += sn9c102_write_reg(cam, 0xa0, 0x2a);
+               err += sn9c102_write_reg(cam, 0xb0, 0x2b);
+               err += sn9c102_write_reg(cam, 0xc0, 0x2c);
+               err += sn9c102_write_reg(cam, 0xd0, 0x2d);
+               err += sn9c102_write_reg(cam, 0xe0, 0x2e);
+               err += sn9c102_write_reg(cam, 0xf0, 0x2f);
+               err += sn9c102_write_reg(cam, 0xff, 0x30);
+
+               err += sn9c102_i2c_write(cam, 0x12, 0x8d);
+               err += sn9c102_i2c_write(cam, 0x12, 0x0d);
+               err += sn9c102_i2c_write(cam, 0x15, 0x34);
+               err += sn9c102_i2c_write(cam, 0x11, 0x01);
+               err += sn9c102_i2c_write(cam, 0x1b, 0x04);
+               err += sn9c102_i2c_write(cam, 0x20, 0x44);
        err += sn9c102_i2c_write(cam, 0x23, 0xee);
        err += sn9c102_i2c_write(cam, 0x26, 0xa0);
        err += sn9c102_i2c_write(cam, 0x27, 0x9a);
-       err += sn9c102_i2c_write(cam, 0x28, 0xa0);
+               err += sn9c102_i2c_write(cam, 0x28, 0x20);
        err += sn9c102_i2c_write(cam, 0x29, 0x30);
-       err += sn9c102_i2c_write(cam, 0x2a, 0xa0);
-       err += sn9c102_i2c_write(cam, 0x2b, 0x1f);
        err += sn9c102_i2c_write(cam, 0x2f, 0x3d);
        err += sn9c102_i2c_write(cam, 0x30, 0x24);
        err += sn9c102_i2c_write(cam, 0x32, 0x86);
@@ -63,45 +125,97 @@ static int ov7630_init(struct sn9c102_device* cam)
        err += sn9c102_i2c_write(cam, 0x71, 0x00);
        err += sn9c102_i2c_write(cam, 0x74, 0x21);
        err += sn9c102_i2c_write(cam, 0x7d, 0xf7);
+               break;
+       default:
+               break;
+       }
 
        return err;
 }
 
 
-static int ov7630_set_ctrl(struct sn9c102_device* cam,
-                          const struct v4l2_control* ctrl)
+static int ov7630_get_ctrl(struct sn9c102_device* cam,
+                          struct v4l2_control* ctrl)
 {
        int err = 0;
 
        switch (ctrl->id) {
        case V4L2_CID_EXPOSURE:
-               err += sn9c102_i2c_write(cam, 0x10, ctrl->value >> 2);
-               err += sn9c102_i2c_write(cam, 0x76, ctrl->value & 0x03);
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x10)) < 0)
+                       return -EIO;
                break;
        case V4L2_CID_RED_BALANCE:
-               err += sn9c102_i2c_write(cam, 0x02, ctrl->value);
+               ctrl->value = sn9c102_pread_reg(cam, 0x07);
                break;
        case V4L2_CID_BLUE_BALANCE:
-               err += sn9c102_i2c_write(cam, 0x01, ctrl->value);
+               ctrl->value = sn9c102_pread_reg(cam, 0x06);
+               break;
+       case SN9C102_V4L2_CID_GREEN_BALANCE:
+               ctrl->value = sn9c102_pread_reg(cam, 0x05);
                break;
        case V4L2_CID_GAIN:
-               err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x00)) < 0)
+                       return -EIO;
+               ctrl->value &= 0x3f;
+               break;
+       case V4L2_CID_DO_WHITE_BALANCE:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0)
+                       return -EIO;
+               ctrl->value &= 0x3f;
+               break;
+       case V4L2_CID_WHITENESS:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x0d)) < 0)
+                       return -EIO;
+               ctrl->value &= 0x3f;
+               break;
+       case V4L2_CID_AUTOGAIN:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x13)) < 0)
+                       return -EIO;
+               ctrl->value &= 0x01;
+               break;
+       case V4L2_CID_VFLIP:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x75)) < 0)
+                       return -EIO;
+               ctrl->value = (ctrl->value & 0x80) ? 1 : 0;
+               break;
+       case SN9C102_V4L2_CID_GAMMA:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x14)) < 0)
+                       return -EIO;
+               ctrl->value = (ctrl->value & 0x02) ? 1 : 0;
+               break;
+       case SN9C102_V4L2_CID_BAND_FILTER:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x2d)) < 0)
+                       return -EIO;
+               ctrl->value = (ctrl->value & 0x02) ? 1 : 0;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return err ? -EIO : 0;
+}
+
+
+static int ov7630_set_ctrl(struct sn9c102_device* cam,
+                          const struct v4l2_control* ctrl)
+{
+       int err = 0;
+
+       switch (ctrl->id) {
+       case V4L2_CID_EXPOSURE:
+               err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
                break;
-       case V4L2_CID_CONTRAST:
-               err += ctrl->value ? sn9c102_i2c_write(cam, 0x05,
-                                                      (ctrl->value-1) | 0x20)
-                                  : sn9c102_i2c_write(cam, 0x05, 0x00);
+       case V4L2_CID_RED_BALANCE:
+               err += sn9c102_write_reg(cam, ctrl->value, 0x07);
                break;
-       case V4L2_CID_BRIGHTNESS:
-               err += sn9c102_i2c_write(cam, 0x06, ctrl->value);
+       case V4L2_CID_BLUE_BALANCE:
+               err += sn9c102_write_reg(cam, ctrl->value, 0x06);
                break;
-       case V4L2_CID_SATURATION:
-               err += sn9c102_i2c_write(cam, 0x03, ctrl->value << 4);
+       case SN9C102_V4L2_CID_GREEN_BALANCE:
+               err += sn9c102_write_reg(cam, ctrl->value, 0x05);
                break;
-       case V4L2_CID_HUE:
-               err += ctrl->value ? sn9c102_i2c_write(cam, 0x04,
-                                                      (ctrl->value-1) | 0x20)
-                                  : sn9c102_i2c_write(cam, 0x04, 0x00);
+       case V4L2_CID_GAIN:
+               err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
                break;
        case V4L2_CID_DO_WHITE_BALANCE:
                err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
@@ -109,23 +223,15 @@ static int ov7630_set_ctrl(struct sn9c102_device* cam,
        case V4L2_CID_WHITENESS:
                err += sn9c102_i2c_write(cam, 0x0d, ctrl->value);
                break;
-       case V4L2_CID_AUTO_WHITE_BALANCE:
-               err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x78);
-               break;
        case V4L2_CID_AUTOGAIN:
-               err += sn9c102_i2c_write(cam, 0x13, ctrl->value);
+               err += sn9c102_i2c_write(cam, 0x13, ctrl->value |
+                                                   (ctrl->value << 1));
                break;
        case V4L2_CID_VFLIP:
                err += sn9c102_i2c_write(cam, 0x75, 0x0e | (ctrl->value << 7));
                break;
-       case V4L2_CID_BLACK_LEVEL:
-               err += sn9c102_i2c_write(cam, 0x25, ctrl->value);
-               break;
-       case SN9C102_V4L2_CID_BRIGHT_LEVEL:
-               err += sn9c102_i2c_write(cam, 0x24, ctrl->value);
-               break;
        case SN9C102_V4L2_CID_GAMMA:
-               err += sn9c102_i2c_write(cam, 0x14, (ctrl->value << 2) | 0x80);
+               err += sn9c102_i2c_write(cam, 0x14, ctrl->value << 2);
                break;
        case SN9C102_V4L2_CID_BAND_FILTER:
                err += sn9c102_i2c_write(cam, 0x2d, ctrl->value << 2);
@@ -141,10 +247,12 @@ static int ov7630_set_ctrl(struct sn9c102_device* cam,
 static int ov7630_set_crop(struct sn9c102_device* cam,
                           const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &ov7630;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        int err = 0;
-       u8 v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
+       u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 1,
+          v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
 
+       err += sn9c102_write_reg(cam, h_start, 0x12);
        err += sn9c102_write_reg(cam, v_start, 0x13);
 
        return err;
@@ -168,7 +276,8 @@ static int ov7630_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor ov7630 = {
        .name = "OV7630",
        .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-       .sysfs_ops = SN9C102_I2C_WRITE,
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
+       .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
        .frequency = SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_2WIRES,
        .i2c_slave_id = 0x21,
@@ -185,73 +294,23 @@ static struct sn9c102_sensor ov7630 = {
                        .flags = 0,
                },
                {
-                       .id = V4L2_CID_HUE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "hue",
-                       .minimum = 0x00,
-                       .maximum = 0x1f+1,
-                       .step = 0x01,
-                       .default_value = 0x00,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_SATURATION,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "saturation",
-                       .minimum = 0x00,
-                       .maximum = 0x0f,
-                       .step = 0x01,
-                       .default_value = 0x08,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_CONTRAST,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "contrast",
-                       .minimum = 0x00,
-                       .maximum = 0x1f+1,
-                       .step = 0x01,
-                       .default_value = 0x00,
-                       .flags = 0,
-               },
-               {
                        .id = V4L2_CID_EXPOSURE,
                        .type = V4L2_CTRL_TYPE_INTEGER,
                        .name = "exposure",
-                       .minimum = 0x000,
-                       .maximum = 0x3ff,
-                       .step = 0x001,
-                       .default_value = 0x83<<2,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_RED_BALANCE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "red balance",
-                       .minimum = 0x00,
-                       .maximum = 0xff,
-                       .step = 0x01,
-                       .default_value = 0x3a,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_BLUE_BALANCE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "blue balance",
                        .minimum = 0x00,
                        .maximum = 0xff,
                        .step = 0x01,
-                       .default_value = 0x77,
+                       .default_value = 0x60,
                        .flags = 0,
                },
                {
-                       .id = V4L2_CID_BRIGHTNESS,
+                       .id = V4L2_CID_WHITENESS,
                        .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "brightness",
+                       .name = "white balance background: red",
                        .minimum = 0x00,
-                       .maximum = 0xff,
+                       .maximum = 0x3f,
                        .step = 0x01,
-                       .default_value = 0xa0,
+                       .default_value = 0x20,
                        .flags = 0,
                },
                {
@@ -265,31 +324,31 @@ static struct sn9c102_sensor ov7630 = {
                        .flags = 0,
                },
                {
-                       .id = V4L2_CID_WHITENESS,
+                       .id = V4L2_CID_RED_BALANCE,
                        .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "white balance background: red",
+                       .name = "red balance",
                        .minimum = 0x00,
-                       .maximum = 0x3f,
+                       .maximum = 0x7f,
                        .step = 0x01,
                        .default_value = 0x20,
                        .flags = 0,
                },
                {
-                       .id = V4L2_CID_AUTO_WHITE_BALANCE,
-                       .type = V4L2_CTRL_TYPE_BOOLEAN,
-                       .name = "auto white balance",
+                       .id = V4L2_CID_BLUE_BALANCE,
+                       .type = V4L2_CTRL_TYPE_INTEGER,
+                       .name = "blue balance",
                        .minimum = 0x00,
-                       .maximum = 0x01,
+                       .maximum = 0x7f,
                        .step = 0x01,
-                       .default_value = 0x01,
+                       .default_value = 0x20,
                        .flags = 0,
                },
                {
                        .id = V4L2_CID_AUTOGAIN,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "gain & exposure mode",
+                       .type = V4L2_CTRL_TYPE_BOOLEAN,
+                       .name = "auto adjust",
                        .minimum = 0x00,
-                       .maximum = 0x03,
+                       .maximum = 0x01,
                        .step = 0x01,
                        .default_value = 0x00,
                        .flags = 0,
@@ -305,23 +364,13 @@ static struct sn9c102_sensor ov7630 = {
                        .flags = 0,
                },
                {
-                       .id = V4L2_CID_BLACK_LEVEL,
+                       .id = SN9C102_V4L2_CID_GREEN_BALANCE,
                        .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "black pixel ratio",
-                       .minimum = 0x01,
-                       .maximum = 0x9a,
-                       .step = 0x01,
-                       .default_value = 0x8a,
-                       .flags = 0,
-               },
-               {
-                       .id = SN9C102_V4L2_CID_BRIGHT_LEVEL,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "bright pixel ratio",
-                       .minimum = 0x01,
-                       .maximum = 0x9a,
+                       .name = "green balance",
+                       .minimum = 0x00,
+                       .maximum = 0x7f,
                        .step = 0x01,
-                       .default_value = 0x10,
+                       .default_value = 0x20,
                        .flags = 0,
                },
                {
@@ -345,6 +394,7 @@ static struct sn9c102_sensor ov7630 = {
                        .flags = 0,
                },
        },
+       .get_ctrl = &ov7630_get_ctrl,
        .set_ctrl = &ov7630_set_ctrl,
        .cropcap = {
                .bounds = {
@@ -364,7 +414,7 @@ static struct sn9c102_sensor ov7630 = {
        .pix_format = {
                .width = 640,
                .height = 480,
-               .pixelformat = V4L2_PIX_FMT_SBGGR8,
+               .pixelformat = V4L2_PIX_FMT_SN9C10X,
                .priv = 8,
        },
        .set_pix_format = &ov7630_set_pix_format
@@ -373,28 +423,36 @@ static struct sn9c102_sensor ov7630 = {
 
 int sn9c102_probe_ov7630(struct sn9c102_device* cam)
 {
-       const struct usb_device_id ov7630_id_table[] = {
-               { USB_DEVICE(0x0c45, 0x602c), },
-               { USB_DEVICE(0x0c45, 0x602d), },
-               { USB_DEVICE(0x0c45, 0x608f), },
-               { USB_DEVICE(0x0c45, 0x60b0), },
-               { }
-       };
-       int err = 0;
-
-       if (!sn9c102_match_id(cam, ov7630_id_table))
-               return -ENODEV;
+       int pid, ver, err = 0;
 
+       switch (sn9c102_get_bridge(cam)) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
        err += sn9c102_write_reg(cam, 0x01, 0x01);
        err += sn9c102_write_reg(cam, 0x00, 0x01);
        err += sn9c102_write_reg(cam, 0x28, 0x17);
-       if (err)
-               return -EIO;
+               break;
+       case BRIDGE_SN9C103: /* do _not_ change anything! */
+               err += sn9c102_write_reg(cam, 0x09, 0x01);
+               err += sn9c102_write_reg(cam, 0x42, 0x01);
+               err += sn9c102_write_reg(cam, 0x28, 0x17);
+               err += sn9c102_write_reg(cam, 0x44, 0x02);
+               pid = sn9c102_i2c_try_read(cam, &ov7630, 0x0a);
+               if (err || pid < 0) { /* try a different initialization */
+                       err = sn9c102_write_reg(cam, 0x01, 0x01);
+                       err += sn9c102_write_reg(cam, 0x00, 0x01);
+               }
+               break;
+       default:
+               break;
+       }
 
-       err += sn9c102_i2c_try_write(cam, &ov7630, 0x0b, 0);
-       if (err)
+       pid = sn9c102_i2c_try_read(cam, &ov7630, 0x0a);
+       ver = sn9c102_i2c_try_read(cam, &ov7630, 0x0b);
+       if (err || pid < 0 || ver < 0)
+               return -EIO;
+       if (pid != 0x76 || ver != 0x31)
                return -ENODEV;
-
        sn9c102_attach_sensor(cam, &ov7630);
 
        return 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_ov7660.c b/drivers/media/video/sn9c102/sn9c102_ov7660.c
new file mode 100644 (file)
index 0000000..d670c24
--- /dev/null
@@ -0,0 +1,592 @@
+/***************************************************************************
+ * Plug-in for OV7660 image sensor connected to the SN9C1xx PC Camera      *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2007 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor ov7660;
+
+
+static int ov7660_init(struct sn9c102_device* cam)
+{
+       int err = 0;
+
+       err += sn9c102_write_reg(cam, 0x40, 0x02);
+       err += sn9c102_write_reg(cam, 0x00, 0x03);
+       err += sn9c102_write_reg(cam, 0x1a, 0x04);
+       err += sn9c102_write_reg(cam, 0x03, 0x10);
+       err += sn9c102_write_reg(cam, 0x08, 0x14);
+       err += sn9c102_write_reg(cam, 0x20, 0x17);
+       err += sn9c102_write_reg(cam, 0x8b, 0x18);
+       err += sn9c102_write_reg(cam, 0x00, 0x19);
+       err += sn9c102_write_reg(cam, 0x1d, 0x1a);
+       err += sn9c102_write_reg(cam, 0x10, 0x1b);
+       err += sn9c102_write_reg(cam, 0x02, 0x1c);
+       err += sn9c102_write_reg(cam, 0x03, 0x1d);
+       err += sn9c102_write_reg(cam, 0x0f, 0x1e);
+       err += sn9c102_write_reg(cam, 0x0c, 0x1f);
+       err += sn9c102_write_reg(cam, 0x00, 0x20);
+       err += sn9c102_write_reg(cam, 0x29, 0x21);
+       err += sn9c102_write_reg(cam, 0x40, 0x22);
+       err += sn9c102_write_reg(cam, 0x54, 0x23);
+       err += sn9c102_write_reg(cam, 0x66, 0x24);
+       err += sn9c102_write_reg(cam, 0x76, 0x25);
+       err += sn9c102_write_reg(cam, 0x85, 0x26);
+       err += sn9c102_write_reg(cam, 0x94, 0x27);
+       err += sn9c102_write_reg(cam, 0xa1, 0x28);
+       err += sn9c102_write_reg(cam, 0xae, 0x29);
+       err += sn9c102_write_reg(cam, 0xbb, 0x2a);
+       err += sn9c102_write_reg(cam, 0xc7, 0x2b);
+       err += sn9c102_write_reg(cam, 0xd3, 0x2c);
+       err += sn9c102_write_reg(cam, 0xde, 0x2d);
+       err += sn9c102_write_reg(cam, 0xea, 0x2e);
+       err += sn9c102_write_reg(cam, 0xf4, 0x2f);
+       err += sn9c102_write_reg(cam, 0xff, 0x30);
+       err += sn9c102_write_reg(cam, 0x00, 0x3F);
+       err += sn9c102_write_reg(cam, 0xC7, 0x40);
+       err += sn9c102_write_reg(cam, 0x01, 0x41);
+       err += sn9c102_write_reg(cam, 0x44, 0x42);
+       err += sn9c102_write_reg(cam, 0x00, 0x43);
+       err += sn9c102_write_reg(cam, 0x44, 0x44);
+       err += sn9c102_write_reg(cam, 0x00, 0x45);
+       err += sn9c102_write_reg(cam, 0x44, 0x46);
+       err += sn9c102_write_reg(cam, 0x00, 0x47);
+       err += sn9c102_write_reg(cam, 0xC7, 0x48);
+       err += sn9c102_write_reg(cam, 0x01, 0x49);
+       err += sn9c102_write_reg(cam, 0xC7, 0x4A);
+       err += sn9c102_write_reg(cam, 0x01, 0x4B);
+       err += sn9c102_write_reg(cam, 0xC7, 0x4C);
+       err += sn9c102_write_reg(cam, 0x01, 0x4D);
+       err += sn9c102_write_reg(cam, 0x44, 0x4E);
+       err += sn9c102_write_reg(cam, 0x00, 0x4F);
+       err += sn9c102_write_reg(cam, 0x44, 0x50);
+       err += sn9c102_write_reg(cam, 0x00, 0x51);
+       err += sn9c102_write_reg(cam, 0x44, 0x52);
+       err += sn9c102_write_reg(cam, 0x00, 0x53);
+       err += sn9c102_write_reg(cam, 0xC7, 0x54);
+       err += sn9c102_write_reg(cam, 0x01, 0x55);
+       err += sn9c102_write_reg(cam, 0xC7, 0x56);
+       err += sn9c102_write_reg(cam, 0x01, 0x57);
+       err += sn9c102_write_reg(cam, 0xC7, 0x58);
+       err += sn9c102_write_reg(cam, 0x01, 0x59);
+       err += sn9c102_write_reg(cam, 0x44, 0x5A);
+       err += sn9c102_write_reg(cam, 0x00, 0x5B);
+       err += sn9c102_write_reg(cam, 0x44, 0x5C);
+       err += sn9c102_write_reg(cam, 0x00, 0x5D);
+       err += sn9c102_write_reg(cam, 0x44, 0x5E);
+       err += sn9c102_write_reg(cam, 0x00, 0x5F);
+       err += sn9c102_write_reg(cam, 0xC7, 0x60);
+       err += sn9c102_write_reg(cam, 0x01, 0x61);
+       err += sn9c102_write_reg(cam, 0xC7, 0x62);
+       err += sn9c102_write_reg(cam, 0x01, 0x63);
+       err += sn9c102_write_reg(cam, 0xC7, 0x64);
+       err += sn9c102_write_reg(cam, 0x01, 0x65);
+       err += sn9c102_write_reg(cam, 0x44, 0x66);
+       err += sn9c102_write_reg(cam, 0x00, 0x67);
+       err += sn9c102_write_reg(cam, 0x44, 0x68);
+       err += sn9c102_write_reg(cam, 0x00, 0x69);
+       err += sn9c102_write_reg(cam, 0x44, 0x6A);
+       err += sn9c102_write_reg(cam, 0x00, 0x6B);
+       err += sn9c102_write_reg(cam, 0xC7, 0x6C);
+       err += sn9c102_write_reg(cam, 0x01, 0x6D);
+       err += sn9c102_write_reg(cam, 0xC7, 0x6E);
+       err += sn9c102_write_reg(cam, 0x01, 0x6F);
+       err += sn9c102_write_reg(cam, 0xC7, 0x70);
+       err += sn9c102_write_reg(cam, 0x01, 0x71);
+       err += sn9c102_write_reg(cam, 0x44, 0x72);
+       err += sn9c102_write_reg(cam, 0x00, 0x73);
+       err += sn9c102_write_reg(cam, 0x44, 0x74);
+       err += sn9c102_write_reg(cam, 0x00, 0x75);
+       err += sn9c102_write_reg(cam, 0x44, 0x76);
+       err += sn9c102_write_reg(cam, 0x00, 0x77);
+       err += sn9c102_write_reg(cam, 0xC7, 0x78);
+       err += sn9c102_write_reg(cam, 0x01, 0x79);
+       err += sn9c102_write_reg(cam, 0xC7, 0x7A);
+       err += sn9c102_write_reg(cam, 0x01, 0x7B);
+       err += sn9c102_write_reg(cam, 0xC7, 0x7C);
+       err += sn9c102_write_reg(cam, 0x01, 0x7D);
+       err += sn9c102_write_reg(cam, 0x44, 0x7E);
+       err += sn9c102_write_reg(cam, 0x00, 0x7F);
+       err += sn9c102_write_reg(cam, 0x14, 0x84);
+       err += sn9c102_write_reg(cam, 0x00, 0x85);
+       err += sn9c102_write_reg(cam, 0x27, 0x86);
+       err += sn9c102_write_reg(cam, 0x00, 0x87);
+       err += sn9c102_write_reg(cam, 0x07, 0x88);
+       err += sn9c102_write_reg(cam, 0x00, 0x89);
+       err += sn9c102_write_reg(cam, 0xEC, 0x8A);
+       err += sn9c102_write_reg(cam, 0x0f, 0x8B);
+       err += sn9c102_write_reg(cam, 0xD8, 0x8C);
+       err += sn9c102_write_reg(cam, 0x0f, 0x8D);
+       err += sn9c102_write_reg(cam, 0x3D, 0x8E);
+       err += sn9c102_write_reg(cam, 0x00, 0x8F);
+       err += sn9c102_write_reg(cam, 0x3D, 0x90);
+       err += sn9c102_write_reg(cam, 0x00, 0x91);
+       err += sn9c102_write_reg(cam, 0xCD, 0x92);
+       err += sn9c102_write_reg(cam, 0x0f, 0x93);
+       err += sn9c102_write_reg(cam, 0xf7, 0x94);
+       err += sn9c102_write_reg(cam, 0x0f, 0x95);
+       err += sn9c102_write_reg(cam, 0x0C, 0x96);
+       err += sn9c102_write_reg(cam, 0x00, 0x97);
+       err += sn9c102_write_reg(cam, 0x00, 0x98);
+       err += sn9c102_write_reg(cam, 0x66, 0x99);
+       err += sn9c102_write_reg(cam, 0x05, 0x9A);
+       err += sn9c102_write_reg(cam, 0x00, 0x9B);
+       err += sn9c102_write_reg(cam, 0x04, 0x9C);
+       err += sn9c102_write_reg(cam, 0x00, 0x9D);
+       err += sn9c102_write_reg(cam, 0x08, 0x9E);
+       err += sn9c102_write_reg(cam, 0x00, 0x9F);
+       err += sn9c102_write_reg(cam, 0x2D, 0xC0);
+       err += sn9c102_write_reg(cam, 0x2D, 0xC1);
+       err += sn9c102_write_reg(cam, 0x3A, 0xC2);
+       err += sn9c102_write_reg(cam, 0x05, 0xC3);
+       err += sn9c102_write_reg(cam, 0x04, 0xC4);
+       err += sn9c102_write_reg(cam, 0x3F, 0xC5);
+       err += sn9c102_write_reg(cam, 0x00, 0xC6);
+       err += sn9c102_write_reg(cam, 0x00, 0xC7);
+       err += sn9c102_write_reg(cam, 0x50, 0xC8);
+       err += sn9c102_write_reg(cam, 0x3C, 0xC9);
+       err += sn9c102_write_reg(cam, 0x28, 0xCA);
+       err += sn9c102_write_reg(cam, 0xD8, 0xCB);
+       err += sn9c102_write_reg(cam, 0x14, 0xCC);
+       err += sn9c102_write_reg(cam, 0xEC, 0xCD);
+       err += sn9c102_write_reg(cam, 0x32, 0xCE);
+       err += sn9c102_write_reg(cam, 0xDD, 0xCF);
+       err += sn9c102_write_reg(cam, 0x32, 0xD0);
+       err += sn9c102_write_reg(cam, 0xDD, 0xD1);
+       err += sn9c102_write_reg(cam, 0x6A, 0xD2);
+       err += sn9c102_write_reg(cam, 0x50, 0xD3);
+       err += sn9c102_write_reg(cam, 0x00, 0xD4);
+       err += sn9c102_write_reg(cam, 0x00, 0xD5);
+       err += sn9c102_write_reg(cam, 0x00, 0xD6);
+
+       err += sn9c102_i2c_write(cam, 0x12, 0x80);
+       err += sn9c102_i2c_write(cam, 0x11, 0x09);
+       err += sn9c102_i2c_write(cam, 0x00, 0x0A);
+       err += sn9c102_i2c_write(cam, 0x01, 0x78);
+       err += sn9c102_i2c_write(cam, 0x02, 0x90);
+       err += sn9c102_i2c_write(cam, 0x03, 0x00);
+       err += sn9c102_i2c_write(cam, 0x04, 0x00);
+       err += sn9c102_i2c_write(cam, 0x05, 0x08);
+       err += sn9c102_i2c_write(cam, 0x06, 0x0B);
+       err += sn9c102_i2c_write(cam, 0x07, 0x00);
+       err += sn9c102_i2c_write(cam, 0x08, 0x1C);
+       err += sn9c102_i2c_write(cam, 0x09, 0x01);
+       err += sn9c102_i2c_write(cam, 0x0A, 0x76);
+       err += sn9c102_i2c_write(cam, 0x0B, 0x60);
+       err += sn9c102_i2c_write(cam, 0x0C, 0x00);
+       err += sn9c102_i2c_write(cam, 0x0D, 0x08);
+       err += sn9c102_i2c_write(cam, 0x0E, 0x04);
+       err += sn9c102_i2c_write(cam, 0x0F, 0x6F);
+       err += sn9c102_i2c_write(cam, 0x10, 0x20);
+       err += sn9c102_i2c_write(cam, 0x11, 0x03);
+       err += sn9c102_i2c_write(cam, 0x12, 0x05);
+       err += sn9c102_i2c_write(cam, 0x13, 0xF8);
+       err += sn9c102_i2c_write(cam, 0x14, 0x2C);
+       err += sn9c102_i2c_write(cam, 0x15, 0x00);
+       err += sn9c102_i2c_write(cam, 0x16, 0x02);
+       err += sn9c102_i2c_write(cam, 0x17, 0x10);
+       err += sn9c102_i2c_write(cam, 0x18, 0x60);
+       err += sn9c102_i2c_write(cam, 0x19, 0x02);
+       err += sn9c102_i2c_write(cam, 0x1A, 0x7B);
+       err += sn9c102_i2c_write(cam, 0x1B, 0x02);
+       err += sn9c102_i2c_write(cam, 0x1C, 0x7F);
+       err += sn9c102_i2c_write(cam, 0x1D, 0xA2);
+       err += sn9c102_i2c_write(cam, 0x1E, 0x01);
+       err += sn9c102_i2c_write(cam, 0x1F, 0x0E);
+       err += sn9c102_i2c_write(cam, 0x20, 0x05);
+       err += sn9c102_i2c_write(cam, 0x21, 0x05);
+       err += sn9c102_i2c_write(cam, 0x22, 0x05);
+       err += sn9c102_i2c_write(cam, 0x23, 0x05);
+       err += sn9c102_i2c_write(cam, 0x24, 0x68);
+       err += sn9c102_i2c_write(cam, 0x25, 0x58);
+       err += sn9c102_i2c_write(cam, 0x26, 0xD4);
+       err += sn9c102_i2c_write(cam, 0x27, 0x80);
+       err += sn9c102_i2c_write(cam, 0x28, 0x80);
+       err += sn9c102_i2c_write(cam, 0x29, 0x30);
+       err += sn9c102_i2c_write(cam, 0x2A, 0x00);
+       err += sn9c102_i2c_write(cam, 0x2B, 0x00);
+       err += sn9c102_i2c_write(cam, 0x2C, 0x80);
+       err += sn9c102_i2c_write(cam, 0x2D, 0x00);
+       err += sn9c102_i2c_write(cam, 0x2E, 0x00);
+       err += sn9c102_i2c_write(cam, 0x2F, 0x0E);
+       err += sn9c102_i2c_write(cam, 0x30, 0x08);
+       err += sn9c102_i2c_write(cam, 0x31, 0x30);
+       err += sn9c102_i2c_write(cam, 0x32, 0xB4);
+       err += sn9c102_i2c_write(cam, 0x33, 0x00);
+       err += sn9c102_i2c_write(cam, 0x34, 0x07);
+       err += sn9c102_i2c_write(cam, 0x35, 0x84);
+       err += sn9c102_i2c_write(cam, 0x36, 0x00);
+       err += sn9c102_i2c_write(cam, 0x37, 0x0C);
+       err += sn9c102_i2c_write(cam, 0x38, 0x02);
+       err += sn9c102_i2c_write(cam, 0x39, 0x43);
+       err += sn9c102_i2c_write(cam, 0x3A, 0x00);
+       err += sn9c102_i2c_write(cam, 0x3B, 0x02);
+       err += sn9c102_i2c_write(cam, 0x3C, 0x6C);
+       err += sn9c102_i2c_write(cam, 0x3D, 0x99);
+       err += sn9c102_i2c_write(cam, 0x3E, 0x0E);
+       err += sn9c102_i2c_write(cam, 0x3F, 0x41);
+       err += sn9c102_i2c_write(cam, 0x40, 0xC1);
+       err += sn9c102_i2c_write(cam, 0x41, 0x22);
+       err += sn9c102_i2c_write(cam, 0x42, 0x08);
+       err += sn9c102_i2c_write(cam, 0x43, 0xF0);
+       err += sn9c102_i2c_write(cam, 0x44, 0x10);
+       err += sn9c102_i2c_write(cam, 0x45, 0x78);
+       err += sn9c102_i2c_write(cam, 0x46, 0xA8);
+       err += sn9c102_i2c_write(cam, 0x47, 0x60);
+       err += sn9c102_i2c_write(cam, 0x48, 0x80);
+       err += sn9c102_i2c_write(cam, 0x49, 0x00);
+       err += sn9c102_i2c_write(cam, 0x4A, 0x00);
+       err += sn9c102_i2c_write(cam, 0x4B, 0x00);
+       err += sn9c102_i2c_write(cam, 0x4C, 0x00);
+       err += sn9c102_i2c_write(cam, 0x4D, 0x00);
+       err += sn9c102_i2c_write(cam, 0x4E, 0x00);
+       err += sn9c102_i2c_write(cam, 0x4F, 0x46);
+       err += sn9c102_i2c_write(cam, 0x50, 0x36);
+       err += sn9c102_i2c_write(cam, 0x51, 0x0F);
+       err += sn9c102_i2c_write(cam, 0x52, 0x17);
+       err += sn9c102_i2c_write(cam, 0x53, 0x7F);
+       err += sn9c102_i2c_write(cam, 0x54, 0x96);
+       err += sn9c102_i2c_write(cam, 0x55, 0x40);
+       err += sn9c102_i2c_write(cam, 0x56, 0x40);
+       err += sn9c102_i2c_write(cam, 0x57, 0x40);
+       err += sn9c102_i2c_write(cam, 0x58, 0x0F);
+       err += sn9c102_i2c_write(cam, 0x59, 0xBA);
+       err += sn9c102_i2c_write(cam, 0x5A, 0x9A);
+       err += sn9c102_i2c_write(cam, 0x5B, 0x22);
+       err += sn9c102_i2c_write(cam, 0x5C, 0xB9);
+       err += sn9c102_i2c_write(cam, 0x5D, 0x9B);
+       err += sn9c102_i2c_write(cam, 0x5E, 0x10);
+       err += sn9c102_i2c_write(cam, 0x5F, 0xF0);
+       err += sn9c102_i2c_write(cam, 0x60, 0x05);
+       err += sn9c102_i2c_write(cam, 0x61, 0x60);
+       err += sn9c102_i2c_write(cam, 0x62, 0x00);
+       err += sn9c102_i2c_write(cam, 0x63, 0x00);
+       err += sn9c102_i2c_write(cam, 0x64, 0x50);
+       err += sn9c102_i2c_write(cam, 0x65, 0x30);
+       err += sn9c102_i2c_write(cam, 0x66, 0x00);
+       err += sn9c102_i2c_write(cam, 0x67, 0x80);
+       err += sn9c102_i2c_write(cam, 0x68, 0x7A);
+       err += sn9c102_i2c_write(cam, 0x69, 0x90);
+       err += sn9c102_i2c_write(cam, 0x6A, 0x80);
+       err += sn9c102_i2c_write(cam, 0x6B, 0x0A);
+       err += sn9c102_i2c_write(cam, 0x6C, 0x30);
+       err += sn9c102_i2c_write(cam, 0x6D, 0x48);
+       err += sn9c102_i2c_write(cam, 0x6E, 0x80);
+       err += sn9c102_i2c_write(cam, 0x6F, 0x74);
+       err += sn9c102_i2c_write(cam, 0x70, 0x64);
+       err += sn9c102_i2c_write(cam, 0x71, 0x60);
+       err += sn9c102_i2c_write(cam, 0x72, 0x5C);
+       err += sn9c102_i2c_write(cam, 0x73, 0x58);
+       err += sn9c102_i2c_write(cam, 0x74, 0x54);
+       err += sn9c102_i2c_write(cam, 0x75, 0x4C);
+       err += sn9c102_i2c_write(cam, 0x76, 0x40);
+       err += sn9c102_i2c_write(cam, 0x77, 0x38);
+       err += sn9c102_i2c_write(cam, 0x78, 0x34);
+       err += sn9c102_i2c_write(cam, 0x79, 0x30);
+       err += sn9c102_i2c_write(cam, 0x7A, 0x2F);
+       err += sn9c102_i2c_write(cam, 0x7B, 0x2B);
+       err += sn9c102_i2c_write(cam, 0x7C, 0x03);
+       err += sn9c102_i2c_write(cam, 0x7D, 0x07);
+       err += sn9c102_i2c_write(cam, 0x7E, 0x17);
+       err += sn9c102_i2c_write(cam, 0x7F, 0x34);
+       err += sn9c102_i2c_write(cam, 0x80, 0x41);
+       err += sn9c102_i2c_write(cam, 0x81, 0x4D);
+       err += sn9c102_i2c_write(cam, 0x82, 0x58);
+       err += sn9c102_i2c_write(cam, 0x83, 0x63);
+       err += sn9c102_i2c_write(cam, 0x84, 0x6E);
+       err += sn9c102_i2c_write(cam, 0x85, 0x77);
+       err += sn9c102_i2c_write(cam, 0x86, 0x87);
+       err += sn9c102_i2c_write(cam, 0x87, 0x95);
+       err += sn9c102_i2c_write(cam, 0x88, 0xAF);
+       err += sn9c102_i2c_write(cam, 0x89, 0xC7);
+       err += sn9c102_i2c_write(cam, 0x8A, 0xDF);
+       err += sn9c102_i2c_write(cam, 0x8B, 0x99);
+       err += sn9c102_i2c_write(cam, 0x8C, 0x99);
+       err += sn9c102_i2c_write(cam, 0x8D, 0xCF);
+       err += sn9c102_i2c_write(cam, 0x8E, 0x20);
+       err += sn9c102_i2c_write(cam, 0x8F, 0x26);
+       err += sn9c102_i2c_write(cam, 0x90, 0x10);
+       err += sn9c102_i2c_write(cam, 0x91, 0x0C);
+       err += sn9c102_i2c_write(cam, 0x92, 0x25);
+       err += sn9c102_i2c_write(cam, 0x93, 0x00);
+       err += sn9c102_i2c_write(cam, 0x94, 0x50);
+       err += sn9c102_i2c_write(cam, 0x95, 0x50);
+       err += sn9c102_i2c_write(cam, 0x96, 0x00);
+       err += sn9c102_i2c_write(cam, 0x97, 0x01);
+       err += sn9c102_i2c_write(cam, 0x98, 0x10);
+       err += sn9c102_i2c_write(cam, 0x99, 0x40);
+       err += sn9c102_i2c_write(cam, 0x9A, 0x40);
+       err += sn9c102_i2c_write(cam, 0x9B, 0x20);
+       err += sn9c102_i2c_write(cam, 0x9C, 0x00);
+       err += sn9c102_i2c_write(cam, 0x9D, 0x99);
+       err += sn9c102_i2c_write(cam, 0x9E, 0x7F);
+       err += sn9c102_i2c_write(cam, 0x9F, 0x00);
+       err += sn9c102_i2c_write(cam, 0xA0, 0x00);
+       err += sn9c102_i2c_write(cam, 0xA1, 0x00);
+
+       return err;
+}
+
+
+static int ov7660_get_ctrl(struct sn9c102_device* cam,
+                          struct v4l2_control* ctrl)
+{
+       int err = 0;
+
+       switch (ctrl->id) {
+       case V4L2_CID_EXPOSURE:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x10)) < 0)
+                       return -EIO;
+               break;
+       case V4L2_CID_DO_WHITE_BALANCE:
+               ctrl->value = sn9c102_pread_reg(cam, 0x02);
+               ctrl->value = (ctrl->value & 0x04) ? 1 : 0;
+               break;
+       case V4L2_CID_RED_BALANCE:
+               ctrl->value = sn9c102_pread_reg(cam, 0x05);
+               ctrl->value &= 0x7f;
+               break;
+       case V4L2_CID_BLUE_BALANCE:
+               ctrl->value = sn9c102_pread_reg(cam, 0x06);
+               ctrl->value &= 0x7f;
+               break;
+       case SN9C102_V4L2_CID_GREEN_BALANCE:
+               ctrl->value = sn9c102_pread_reg(cam, 0x07);
+               ctrl->value &= 0x7f;
+               break;
+       case V4L2_CID_GAIN:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x00)) < 0)
+                       return -EIO;
+               ctrl->value &= 0x7f;
+               break;
+       case V4L2_CID_AUTOGAIN:
+               if ((ctrl->value = sn9c102_i2c_read(cam, 0x13)) < 0)
+                       return -EIO;
+               ctrl->value &= 0x01;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return err ? -EIO : 0;
+}
+
+
+static int ov7660_set_ctrl(struct sn9c102_device* cam,
+                          const struct v4l2_control* ctrl)
+{
+       int err = 0;
+
+       switch (ctrl->id) {
+       case V4L2_CID_EXPOSURE:
+               err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
+               break;
+       case V4L2_CID_DO_WHITE_BALANCE:
+               err += sn9c102_write_reg(cam, 0x43 | (ctrl->value << 2), 0x02);
+               break;
+       case V4L2_CID_RED_BALANCE:
+               err += sn9c102_write_reg(cam, ctrl->value, 0x05);
+               break;
+       case V4L2_CID_BLUE_BALANCE:
+               err += sn9c102_write_reg(cam, ctrl->value, 0x06);
+               break;
+       case SN9C102_V4L2_CID_GREEN_BALANCE:
+               err += sn9c102_write_reg(cam, ctrl->value, 0x07);
+               break;
+       case V4L2_CID_GAIN:
+               err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
+               break;
+       case V4L2_CID_AUTOGAIN:
+               err += sn9c102_i2c_write(cam, 0x13, 0xf0 | ctrl->value |
+                                                   (ctrl->value << 1));
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return err ? -EIO : 0;
+}
+
+
+static int ov7660_set_crop(struct sn9c102_device* cam,
+                          const struct v4l2_rect* rect)
+{
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
+       int err = 0;
+       u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 1,
+          v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
+
+       err += sn9c102_write_reg(cam, h_start, 0x12);
+       err += sn9c102_write_reg(cam, v_start, 0x13);
+
+       return err;
+}
+
+
+static int ov7660_set_pix_format(struct sn9c102_device* cam,
+                                const struct v4l2_pix_format* pix)
+{
+       int r0, err = 0;
+
+       r0 = sn9c102_pread_reg(cam, 0x01);
+
+       if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
+               err += sn9c102_write_reg(cam, r0 | 0x40, 0x01);
+               err += sn9c102_write_reg(cam, 0xa2, 0x17);
+               err += sn9c102_i2c_write(cam, 0x11, 0x00);
+       } else {
+               err += sn9c102_write_reg(cam, r0 | 0x40, 0x01);
+               err += sn9c102_write_reg(cam, 0xa2, 0x17);
+               err += sn9c102_i2c_write(cam, 0x11, 0x0d);
+       }
+
+       return err;
+}
+
+
+static struct sn9c102_sensor ov7660 = {
+       .name = "OV7660",
+       .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C105 | BRIDGE_SN9C120,
+       .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
+       .frequency = SN9C102_I2C_100KHZ,
+       .interface = SN9C102_I2C_2WIRES,
+       .i2c_slave_id = 0x21,
+       .init = &ov7660_init,
+       .qctrl = {
+               {
+                       .id = V4L2_CID_GAIN,
+                       .type = V4L2_CTRL_TYPE_INTEGER,
+                       .name = "global gain",
+                       .minimum = 0x00,
+                       .maximum = 0x7f,
+                       .step = 0x01,
+                       .default_value = 0x0a,
+                       .flags = 0,
+               },
+               {
+                       .id = V4L2_CID_EXPOSURE,
+                       .type = V4L2_CTRL_TYPE_INTEGER,
+                       .name = "exposure",
+                       .minimum = 0x00,
+                       .maximum = 0xff,
+                       .step = 0x01,
+                       .default_value = 0x50,
+                       .flags = 0,
+               },
+               {
+                       .id = V4L2_CID_DO_WHITE_BALANCE,
+                       .type = V4L2_CTRL_TYPE_BOOLEAN,
+                       .name = "night mode",
+                       .minimum = 0x00,
+                       .maximum = 0x01,
+                       .step = 0x01,
+                       .default_value = 0x00,
+                       .flags = 0,
+               },
+               {
+                       .id = V4L2_CID_RED_BALANCE,
+                       .type = V4L2_CTRL_TYPE_INTEGER,
+                       .name = "red balance",
+                       .minimum = 0x00,
+                       .maximum = 0x7f,
+                       .step = 0x01,
+                       .default_value = 0x1f,
+                       .flags = 0,
+               },
+               {
+                       .id = V4L2_CID_BLUE_BALANCE,
+                       .type = V4L2_CTRL_TYPE_INTEGER,
+                       .name = "blue balance",
+                       .minimum = 0x00,
+                       .maximum = 0x7f,
+                       .step = 0x01,
+                       .default_value = 0x1e,
+                       .flags = 0,
+               },
+               {
+                       .id = V4L2_CID_AUTOGAIN,
+                       .type = V4L2_CTRL_TYPE_BOOLEAN,
+                       .name = "auto adjust",
+                       .minimum = 0x00,
+                       .maximum = 0x01,
+                       .step = 0x01,
+                       .default_value = 0x00,
+                       .flags = 0,
+               },
+               {
+                       .id = SN9C102_V4L2_CID_GREEN_BALANCE,
+                       .type = V4L2_CTRL_TYPE_INTEGER,
+                       .name = "green balance",
+                       .minimum = 0x00,
+                       .maximum = 0x7f,
+                       .step = 0x01,
+                       .default_value = 0x20,
+                       .flags = 0,
+               },
+       },
+       .get_ctrl = &ov7660_get_ctrl,
+       .set_ctrl = &ov7660_set_ctrl,
+       .cropcap = {
+               .bounds = {
+                       .left = 0,
+                       .top = 0,
+                       .width = 640,
+                       .height = 480,
+               },
+               .defrect = {
+                       .left = 0,
+                       .top = 0,
+                       .width = 640,
+                       .height = 480,
+               },
+       },
+       .set_crop = &ov7660_set_crop,
+       .pix_format = {
+               .width = 640,
+               .height = 480,
+               .pixelformat = V4L2_PIX_FMT_JPEG,
+               .priv = 8,
+       },
+       .set_pix_format = &ov7660_set_pix_format
+};
+
+
+int sn9c102_probe_ov7660(struct sn9c102_device* cam)
+{
+       int pid, ver, err = 0;
+
+       err += sn9c102_write_reg(cam, 0x01, 0xf1);
+       err += sn9c102_write_reg(cam, 0x00, 0xf1);
+       err += sn9c102_write_reg(cam, 0x01, 0x01);
+       err += sn9c102_write_reg(cam, 0x00, 0x01);
+       err += sn9c102_write_reg(cam, 0x28, 0x17);
+
+       pid = sn9c102_i2c_try_read(cam, &ov7660, 0x0a);
+       ver = sn9c102_i2c_try_read(cam, &ov7660, 0x0b);
+       if (err || pid < 0 || ver < 0)
+               return -EIO;
+       if (pid != 0x76 || ver != 0x60)
+               return -ENODEV;
+       sn9c102_attach_sensor(cam, &ov7660);
+
+       return 0;
+}
index 9915944..8d79a5f 100644 (file)
@@ -1,8 +1,8 @@
 /***************************************************************************
- * Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera     *
+ * Plug-in for PAS106B image sensor connected to the SN9C1xx PC Camera     *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -143,7 +143,7 @@ static int pas106b_set_ctrl(struct sn9c102_device* cam,
 static int pas106b_set_crop(struct sn9c102_device* cam,
                            const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &pas106b;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        int err = 0;
        u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4,
           v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
@@ -172,6 +172,7 @@ static int pas106b_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor pas106b = {
        .name = "PAS106B",
        .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
        .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
        .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_2WIRES,
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bca.c b/drivers/media/video/sn9c102/sn9c102_pas202bca.c
deleted file mode 100644 (file)
index c8f1ae2..0000000
+++ /dev/null
@@ -1,238 +0,0 @@
-/***************************************************************************
- * Plug-in for PAS202BCA image sensor connected to the SN9C10x PC Camera   *
- * Controllers                                                             *
- *                                                                         *
- * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#include <linux/delay.h>
-#include "sn9c102_sensor.h"
-
-
-static struct sn9c102_sensor pas202bca;
-
-
-static int pas202bca_init(struct sn9c102_device* cam)
-{
-       int err = 0;
-
-       err += sn9c102_write_reg(cam, 0x00, 0x10);
-       err += sn9c102_write_reg(cam, 0x00, 0x11);
-       err += sn9c102_write_reg(cam, 0x00, 0x14);
-       err += sn9c102_write_reg(cam, 0x20, 0x17);
-       err += sn9c102_write_reg(cam, 0x30, 0x19);
-       err += sn9c102_write_reg(cam, 0x09, 0x18);
-
-       err += sn9c102_i2c_write(cam, 0x02, 0x14);
-       err += sn9c102_i2c_write(cam, 0x03, 0x40);
-       err += sn9c102_i2c_write(cam, 0x0d, 0x2c);
-       err += sn9c102_i2c_write(cam, 0x0e, 0x01);
-       err += sn9c102_i2c_write(cam, 0x0f, 0xa9);
-       err += sn9c102_i2c_write(cam, 0x10, 0x08);
-       err += sn9c102_i2c_write(cam, 0x13, 0x63);
-       err += sn9c102_i2c_write(cam, 0x15, 0x70);
-       err += sn9c102_i2c_write(cam, 0x11, 0x01);
-
-       msleep(400);
-
-       return err;
-}
-
-
-static int pas202bca_set_pix_format(struct sn9c102_device* cam,
-                                   const struct v4l2_pix_format* pix)
-{
-       int err = 0;
-
-       if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
-               err += sn9c102_write_reg(cam, 0x24, 0x17);
-       else
-               err += sn9c102_write_reg(cam, 0x20, 0x17);
-
-       return err;
-}
-
-
-static int pas202bca_set_ctrl(struct sn9c102_device* cam,
-                             const struct v4l2_control* ctrl)
-{
-       int err = 0;
-
-       switch (ctrl->id) {
-       case V4L2_CID_EXPOSURE:
-               err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6);
-               err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f);
-               break;
-       case V4L2_CID_RED_BALANCE:
-               err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
-               break;
-       case V4L2_CID_BLUE_BALANCE:
-               err += sn9c102_i2c_write(cam, 0x07, ctrl->value);
-               break;
-       case V4L2_CID_GAIN:
-               err += sn9c102_i2c_write(cam, 0x10, ctrl->value);
-               break;
-       case SN9C102_V4L2_CID_GREEN_BALANCE:
-               err += sn9c102_i2c_write(cam, 0x08, ctrl->value);
-               break;
-       case SN9C102_V4L2_CID_DAC_MAGNITUDE:
-               err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
-               break;
-       default:
-               return -EINVAL;
-       }
-       err += sn9c102_i2c_write(cam, 0x11, 0x01);
-
-       return err ? -EIO : 0;
-}
-
-
-static int pas202bca_set_crop(struct sn9c102_device* cam,
-                             const struct v4l2_rect* rect)
-{
-       struct sn9c102_sensor* s = &pas202bca;
-       int err = 0;
-       u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3,
-          v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
-
-       err += sn9c102_write_reg(cam, h_start, 0x12);
-       err += sn9c102_write_reg(cam, v_start, 0x13);
-
-       return err;
-}
-
-
-static struct sn9c102_sensor pas202bca = {
-       .name = "PAS202BCA",
-       .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-       .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
-       .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
-       .interface = SN9C102_I2C_2WIRES,
-       .i2c_slave_id = 0x40,
-       .init = &pas202bca_init,
-       .qctrl = {
-               {
-                       .id = V4L2_CID_EXPOSURE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "exposure",
-                       .minimum = 0x01e5,
-                       .maximum = 0x3fff,
-                       .step = 0x0001,
-                       .default_value = 0x01e5,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_GAIN,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "global gain",
-                       .minimum = 0x00,
-                       .maximum = 0x1f,
-                       .step = 0x01,
-                       .default_value = 0x0c,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_RED_BALANCE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "red balance",
-                       .minimum = 0x00,
-                       .maximum = 0x0f,
-                       .step = 0x01,
-                       .default_value = 0x01,
-                       .flags = 0,
-               },
-               {
-                       .id = V4L2_CID_BLUE_BALANCE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "blue balance",
-                       .minimum = 0x00,
-                       .maximum = 0x0f,
-                       .step = 0x01,
-                       .default_value = 0x05,
-                       .flags = 0,
-               },
-               {
-                       .id = SN9C102_V4L2_CID_GREEN_BALANCE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "green balance",
-                       .minimum = 0x00,
-                       .maximum = 0x0f,
-                       .step = 0x01,
-                       .default_value = 0x00,
-                       .flags = 0,
-               },
-               {
-                       .id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
-                       .type = V4L2_CTRL_TYPE_INTEGER,
-                       .name = "DAC magnitude",
-                       .minimum = 0x00,
-                       .maximum = 0xff,
-                       .step = 0x01,
-                       .default_value = 0x04,
-                       .flags = 0,
-               },
-       },
-       .set_ctrl = &pas202bca_set_ctrl,
-       .cropcap = {
-               .bounds = {
-                       .left = 0,
-                       .top = 0,
-                       .width = 640,
-                       .height = 480,
-               },
-               .defrect = {
-                       .left = 0,
-                       .top = 0,
-                       .width = 640,
-                       .height = 480,
-               },
-       },
-       .set_crop = &pas202bca_set_crop,
-       .pix_format = {
-               .width = 640,
-               .height = 480,
-               .pixelformat = V4L2_PIX_FMT_SBGGR8,
-               .priv = 8,
-       },
-       .set_pix_format = &pas202bca_set_pix_format
-};
-
-
-int sn9c102_probe_pas202bca(struct sn9c102_device* cam)
-{
-       const struct usb_device_id pas202bca_id_table[] = {
-               { USB_DEVICE(0x0c45, 0x60af), },
-               { }
-       };
-       int err = 0;
-
-       if (!sn9c102_match_id(cam,pas202bca_id_table))
-               return -ENODEV;
-
-       err += sn9c102_write_reg(cam, 0x01, 0x01);
-       err += sn9c102_write_reg(cam, 0x40, 0x01);
-       err += sn9c102_write_reg(cam, 0x28, 0x17);
-       if (err)
-               return -EIO;
-
-       if (sn9c102_i2c_try_write(cam, &pas202bca, 0x10, 0)) /* try to write */
-               return -ENODEV;
-
-       sn9c102_attach_sensor(cam, &pas202bca);
-
-       return 0;
-}
index e3c1178..7894f01 100644 (file)
@@ -1,13 +1,13 @@
 /***************************************************************************
- * Plug-in for PAS202BCB image sensor connected to the SN9C10x PC Camera   *
+ * Plug-in for PAS202BCB image sensor connected to the SN9C1xx PC Camera   *
  * Controllers                                                             *
  *                                                                         *
  * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio                  *
  *                       <medaglia@undl.org.br>                            *
  *                       http://cadu.homelinux.com:8080/                   *
  *                                                                         *
- * DAC Magnitude, exposure and green gain controls added by                *
- * Luca Risolia <luca.risolia@studio.unibo.it>                             *
+ * Support for SN9C103, DAC Magnitude, exposure and green gain controls    *
+ * added by Luca Risolia <luca.risolia@studio.unibo.it>                    *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -35,12 +35,54 @@ static int pas202bcb_init(struct sn9c102_device* cam)
 {
        int err = 0;
 
+       switch (sn9c102_get_bridge(cam)) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
        err += sn9c102_write_reg(cam, 0x00, 0x10);
        err += sn9c102_write_reg(cam, 0x00, 0x11);
        err += sn9c102_write_reg(cam, 0x00, 0x14);
        err += sn9c102_write_reg(cam, 0x20, 0x17);
        err += sn9c102_write_reg(cam, 0x30, 0x19);
        err += sn9c102_write_reg(cam, 0x09, 0x18);
+               break;
+       case BRIDGE_SN9C103:
+               err += sn9c102_write_reg(cam, 0x00, 0x02);
+               err += sn9c102_write_reg(cam, 0x00, 0x03);
+               err += sn9c102_write_reg(cam, 0x1a, 0x04);
+               err += sn9c102_write_reg(cam, 0x20, 0x05);
+               err += sn9c102_write_reg(cam, 0x20, 0x06);
+               err += sn9c102_write_reg(cam, 0x20, 0x07);
+               err += sn9c102_write_reg(cam, 0x00, 0x10);
+               err += sn9c102_write_reg(cam, 0x00, 0x11);
+               err += sn9c102_write_reg(cam, 0x00, 0x14);
+               err += sn9c102_write_reg(cam, 0x20, 0x17);
+               err += sn9c102_write_reg(cam, 0x30, 0x19);
+               err += sn9c102_write_reg(cam, 0x09, 0x18);
+               err += sn9c102_write_reg(cam, 0x02, 0x1c);
+               err += sn9c102_write_reg(cam, 0x03, 0x1d);
+               err += sn9c102_write_reg(cam, 0x0f, 0x1e);
+               err += sn9c102_write_reg(cam, 0x0c, 0x1f);
+               err += sn9c102_write_reg(cam, 0x00, 0x20);
+               err += sn9c102_write_reg(cam, 0x10, 0x21);
+               err += sn9c102_write_reg(cam, 0x20, 0x22);
+               err += sn9c102_write_reg(cam, 0x30, 0x23);
+               err += sn9c102_write_reg(cam, 0x40, 0x24);
+               err += sn9c102_write_reg(cam, 0x50, 0x25);
+               err += sn9c102_write_reg(cam, 0x60, 0x26);
+               err += sn9c102_write_reg(cam, 0x70, 0x27);
+               err += sn9c102_write_reg(cam, 0x80, 0x28);
+               err += sn9c102_write_reg(cam, 0x90, 0x29);
+               err += sn9c102_write_reg(cam, 0xa0, 0x2a);
+               err += sn9c102_write_reg(cam, 0xb0, 0x2b);
+               err += sn9c102_write_reg(cam, 0xc0, 0x2c);
+               err += sn9c102_write_reg(cam, 0xd0, 0x2d);
+               err += sn9c102_write_reg(cam, 0xe0, 0x2e);
+               err += sn9c102_write_reg(cam, 0xf0, 0x2f);
+               err += sn9c102_write_reg(cam, 0xff, 0x30);
+               break;
+       default:
+               break;
+       }
 
        err += sn9c102_i2c_write(cam, 0x02, 0x14);
        err += sn9c102_i2c_write(cam, 0x03, 0x40);
@@ -107,7 +149,7 @@ static int pas202bcb_set_pix_format(struct sn9c102_device* cam,
        int err = 0;
 
        if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
-               err += sn9c102_write_reg(cam, 0x24, 0x17);
+               err += sn9c102_write_reg(cam, 0x28, 0x17);
        else
                err += sn9c102_write_reg(cam, 0x20, 0x17);
 
@@ -152,11 +194,23 @@ static int pas202bcb_set_ctrl(struct sn9c102_device* cam,
 static int pas202bcb_set_crop(struct sn9c102_device* cam,
                              const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &pas202bcb;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        int err = 0;
-       u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4,
+       u8 h_start = 0,
           v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
 
+       switch (sn9c102_get_bridge(cam)) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
+               h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4;
+               break;
+       case BRIDGE_SN9C103:
+               h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3;
+               break;
+       default:
+               break;
+       }
+
        err += sn9c102_write_reg(cam, h_start, 0x12);
        err += sn9c102_write_reg(cam, v_start, 0x13);
 
@@ -166,8 +220,8 @@ static int pas202bcb_set_crop(struct sn9c102_device* cam,
 
 static struct sn9c102_sensor pas202bcb = {
        .name = "PAS202BCB",
-       .maintainer = "Carlos Eduardo Medaglia Dyonisio "
-                     "<medaglia@undl.org.br>",
+       .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
        .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
        .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_2WIRES,
@@ -191,7 +245,7 @@ static struct sn9c102_sensor pas202bcb = {
                        .minimum = 0x00,
                        .maximum = 0x1f,
                        .step = 0x01,
-                       .default_value = 0x0c,
+                       .default_value = 0x0b,
                        .flags = 0,
                },
                {
@@ -201,7 +255,7 @@ static struct sn9c102_sensor pas202bcb = {
                        .minimum = 0x00,
                        .maximum = 0x0f,
                        .step = 0x01,
-                       .default_value = 0x01,
+                       .default_value = 0x00,
                        .flags = 0,
                },
                {
@@ -271,16 +325,27 @@ int sn9c102_probe_pas202bcb(struct sn9c102_device* cam)
         *  Minimal initialization to enable the I2C communication
         *  NOTE: do NOT change the values!
         */
-       err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */
-       err += sn9c102_write_reg(cam, 0x40, 0x01); /* sensor power on */
-       err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */
-       if (err)
-               return -EIO;
+       switch (sn9c102_get_bridge(cam)) {
+       case BRIDGE_SN9C101:
+       case BRIDGE_SN9C102:
+               err += sn9c102_write_reg(cam, 0x01, 0x01); /* power down */
+               err += sn9c102_write_reg(cam, 0x40, 0x01); /* power on */
+               err += sn9c102_write_reg(cam, 0x28, 0x17); /* clock 24 MHz */
+               break;
+       case BRIDGE_SN9C103: /* do _not_ change anything! */
+               err += sn9c102_write_reg(cam, 0x09, 0x01);
+               err += sn9c102_write_reg(cam, 0x44, 0x01);
+               err += sn9c102_write_reg(cam, 0x44, 0x02);
+               err += sn9c102_write_reg(cam, 0x29, 0x17);
+               break;
+       default:
+               break;
+       }
 
        r0 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x00);
        r1 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x01);
 
-       if (r0 < 0 || r1 < 0)
+       if (err || r0 < 0 || r1 < 0)
                return -EIO;
 
        pid = (r0 << 4) | ((r1 & 0xf0) >> 4);
index 2a874ee..05f2942 100644 (file)
@@ -1,7 +1,7 @@
 /***************************************************************************
- * API for image sensors connected to the SN9C10x PC Camera Controllers    *
+ * API for image sensors connected to the SN9C1xx PC Camera Controllers    *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -36,14 +36,13 @@ struct sn9c102_sensor;
 /*
    OVERVIEW.
    This is a small interface that allows you to add support for any CCD/CMOS
-   image sensors connected to the SN9C10X bridges. The entire API is documented
+   image sensors connected to the SN9C1XX bridges. The entire API is documented
    below. In the most general case, to support a sensor there are three steps
    you have to follow:
    1) define the main "sn9c102_sensor" structure by setting the basic fields;
    2) write a probing function to be called by the core module when the USB
       camera is recognized, then add both the USB ids and the name of that
-      function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see
-      below);
+      function to the two corresponding tables in sn9c102_devtable.h;
    3) implement the methods that you want/need (and fill the rest of the main
       structure accordingly).
    "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do
@@ -54,42 +53,21 @@ struct sn9c102_sensor;
 
 /*****************************************************************************/
 
-/*
-   Probing functions: on success, you must attach the sensor to the camera
-   by calling sn9c102_attach_sensor() provided below.
-   To enable the I2C communication, you might need to perform a really basic
-   initialization of the SN9C10X chip by using the write function declared
-   ahead.
-   Functions must return 0 on success, the appropriate error otherwise.
-*/
-extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
-extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
-extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
-extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
-extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam);
-extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
-extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
-extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
-
-/*
-   Add the above entries to this table. Be sure to add the entry in the right
-   place, since, on failure, the next probing routine is called according to
-   the order of the list below, from top to bottom.
-*/
-#define SN9C102_SENSOR_TABLE                                                  \
-static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {              \
-       &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */     \
-       &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */    \
-       &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */  \
-       &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */    \
-       &sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \
-       &sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */    \
-       &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */       \
-       &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */       \
-       NULL,                                                                 \
+enum sn9c102_bridge {
+       BRIDGE_SN9C101 = 0x01,
+       BRIDGE_SN9C102 = 0x02,
+       BRIDGE_SN9C103 = 0x04,
+       BRIDGE_SN9C105 = 0x08,
+       BRIDGE_SN9C120 = 0x10,
 };
 
-/* Device identification */
+/* Return the bridge name */
+enum sn9c102_bridge sn9c102_get_bridge(struct sn9c102_device* cam);
+
+/* Return a pointer the sensor struct attached to the camera */
+struct sn9c102_sensor* sn9c102_get_sensor(struct sn9c102_device* cam);
+
+/* Identify a device */
 extern struct sn9c102_device*
 sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id);
 
@@ -99,68 +77,8 @@ sn9c102_attach_sensor(struct sn9c102_device* cam,
                      struct sn9c102_sensor* sensor);
 
 /*
-   Each SN9C10x camera has proper PID/VID identifiers.
-   SN9C103 supports multiple interfaces, but we only handle the video class
-   interface.
-*/
-#define SN9C102_USB_DEVICE(vend, prod, intclass)                              \
-       .match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
-                      USB_DEVICE_ID_MATCH_INT_CLASS,                         \
-       .idVendor = (vend),                                                   \
-       .idProduct = (prod),                                                  \
-       .bInterfaceClass = (intclass)
-
-#define SN9C102_ID_TABLE                                                      \
-static const struct usb_device_id sn9c102_id_table[] = {                      \
-       { USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */                     \
-       { USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */                     \
-       { USB_DEVICE(0x0c45, 0x6007), },                                      \
-       { USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */                        \
-       { USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */                        \
-       { USB_DEVICE(0x0c45, 0x6024), },                                      \
-       { USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */      \
-       { USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */                      \
-       { USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */                        \
-       { USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */                        \
-       { USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */                        \
-       { USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */                         \
-       { USB_DEVICE(0x0c45, 0x602d), },                                      \
-       { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */                         \
-       { USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */                          \
-       { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */  \
-       { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */     \
-       { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */         \
-       { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */         \
-       { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */           \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */          \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */       \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */       \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */       \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), },                        \
-       { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), },                        \
-       { }                                                                   \
-};
-
-/*****************************************************************************/
-
-/*
    Read/write routines: they always return -1 on error, 0 or the read value
-   otherwise. NOTE that a real read operation is not supported by the SN9C10X
+   otherwise. NOTE that a real read operation is not supported by the SN9C1XX
    chip for some of its registers. To work around this problem, a pseudo-read
    call is provided instead: it returns the last successfully written value
    on the register (0 if it has never been written), the usual -1 on error.
@@ -176,7 +94,7 @@ extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*,
    These must be used if and only if the sensor doesn't implement the standard
    I2C protocol. There are a number of good reasons why you must use the
    single-byte versions of these functions: do not abuse. The first function
-   writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X
+   writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C1XX
    chip. The second one programs the registers 0x09 and 0x10 with data0 and
    data1, and places the n bytes read from the sensor register table in the
    buffer pointed by 'buffer'. Both the functions return -1 on error; the write
@@ -200,16 +118,6 @@ extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index);
 extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
 extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
 
-/*
-   NOTE: there are no exported debugging functions. To uniform the output you
-   must use the dev_info()/dev_warn()/dev_err() macros defined in device.h,
-   already included here, the argument being the struct device '&usbdev->dev'
-   of the sensor structure. Do NOT use these macros before the sensor is
-   attached or the kernel will crash! However, you should not need to notify
-   the user about common errors or other messages, since this is done by the
-   master module.
-*/
-
 /*****************************************************************************/
 
 enum sn9c102_i2c_sysfs_ops {
@@ -227,17 +135,19 @@ enum sn9c102_i2c_interface {
        SN9C102_I2C_3WIRES,
 };
 
-#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+#define SN9C102_MAX_CTRLS (V4L2_CID_LASTP1-V4L2_CID_BASE+10)
 
 struct sn9c102_sensor {
        char name[32], /* sensor name */
             maintainer[64]; /* name of the mantainer <email> */
 
+       enum sn9c102_bridge supported_bridge; /* supported SN9C1xx bridges */
+
        /* Supported operations through the 'sysfs' interface */
        enum sn9c102_i2c_sysfs_ops sysfs_ops;
 
        /*
-          These sensor capabilities must be provided if the SN9C10X controller
+          These sensor capabilities must be provided if the SN9C1XX controller
           needs to communicate through the sensor serial interface by using
           at least one of the i2c functions available.
        */
@@ -260,7 +170,7 @@ struct sn9c102_sensor {
        /*
           This function will be called after the sensor has been attached.
           It should be used to initialize the sensor only, but may also
-          configure part of the SN9C10X chip if necessary. You don't need to
+          configure part of the SN9C1XX chip if necessary. You don't need to
           setup picture settings like brightness, contrast, etc.. here, if
           the corrisponding controls are implemented (see below), since
           they are adjusted in the core driver by calling the set_ctrl()
@@ -300,7 +210,7 @@ struct sn9c102_sensor {
           It is not always true that the largest achievable active window can
           cover the whole array of pixels. The V4L2 API defines another
           area called "source rectangle", which, in turn, is a subrectangle of
-          the active window. The SN9C10X chip is always programmed to read the
+          the active window. The SN9C1XX chip is always programmed to read the
           source rectangle.
           The bounds of both the active window and the source rectangle are
           specified in the cropcap substructures 'bounds' and 'defrect'.
@@ -326,13 +236,13 @@ struct sn9c102_sensor {
                        const struct v4l2_rect* rect);
        /*
           To be called on VIDIOC_C_SETCROP. The core module always calls a
-          default routine which configures the appropriate SN9C10X regs (also
+          default routine which configures the appropriate SN9C1XX regs (also
           scaling), but you may need to override/adjust specific stuff.
           'rect' contains width and height values that are multiple of 16: in
           case you override the default function, you always have to program
           the chip to match those values; on error return the corresponding
           error code without rolling back.
-          NOTE: in case, you must program the SN9C10X chip to get rid of
+          NOTE: in case, you must program the SN9C1XX chip to get rid of
                 blank pixels or blank lines at the _start_ of each line or
                 frame after each HSYNC or VSYNC, so that the image starts with
                 real RGB data (see regs 0x12, 0x13) (having set H_SIZE and,
@@ -344,16 +254,16 @@ struct sn9c102_sensor {
        /*
           What you have to define here are: 1) initial 'width' and 'height' of
           the target rectangle 2) the initial 'pixelformat', which can be
-          either V4L2_PIX_FMT_SN9C10X (for compressed video) or
-          V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the
-          number of bits per pixel for uncompressed video, 8 or 9 (despite the
-          current value of 'pixelformat').
+          either V4L2_PIX_FMT_SN9C10X, V4L2_PIX_FMT_JPEG (for ompressed video)
+          or V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate
+          the number of bits per pixel for uncompressed video, 8 or 9 (despite
+          the current value of 'pixelformat').
           NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4
                   of cropcap.defrect.width and cropcap.defrect.height. I
                   suggest 1/1.
           NOTE 2: The initial compression quality is defined by the first bit
                   of reg 0x17 during the initialization of the image sensor.
-          NOTE 3: as said above, you have to program the SN9C10X chip to get
+          NOTE 3: as said above, you have to program the SN9C1XX chip to get
                   rid of any blank pixels, so that the output of the sensor
                   matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR).
        */
@@ -378,12 +288,12 @@ struct sn9c102_sensor {
 /*****************************************************************************/
 
 /* Private ioctl's for control settings supported by some image sensors */
-#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE
-#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1
-#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2
-#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3
-#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4
-#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5
-#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6
+#define SN9C102_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0)
+#define SN9C102_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1)
+#define SN9C102_V4L2_CID_RESET_LEVEL (V4L2_CID_PRIVATE_BASE + 2)
+#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE (V4L2_CID_PRIVATE_BASE + 3)
+#define SN9C102_V4L2_CID_GAMMA (V4L2_CID_PRIVATE_BASE + 4)
+#define SN9C102_V4L2_CID_BAND_FILTER (V4L2_CID_PRIVATE_BASE + 5)
+#define SN9C102_V4L2_CID_BRIGHT_LEVEL (V4L2_CID_PRIVATE_BASE + 6)
 
 #endif /* _SN9C102_SENSOR_H_ */
index 294eb02..90023ad 100644 (file)
@@ -1,8 +1,8 @@
 /***************************************************************************
- * Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera  *
+ * Plug-in for TAS5110C1B image sensor connected to the SN9C1xx PC Camera  *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -64,7 +64,7 @@ static int tas5110c1b_set_ctrl(struct sn9c102_device* cam,
 static int tas5110c1b_set_crop(struct sn9c102_device* cam,
                               const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &tas5110c1b;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        int err = 0;
        u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 69,
           v_start = (u8)(rect->top - s->cropcap.bounds.top) + 9;
@@ -98,6 +98,7 @@ static int tas5110c1b_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor tas5110c1b = {
        .name = "TAS5110C1B",
        .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
        .sysfs_ops = SN9C102_I2C_WRITE,
        .frequency = SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_3WIRES,
@@ -145,6 +146,7 @@ int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam)
        const struct usb_device_id tas5110c1b_id_table[] = {
                { USB_DEVICE(0x0c45, 0x6001), },
                { USB_DEVICE(0x0c45, 0x6005), },
+               { USB_DEVICE(0x0c45, 0x6007), },
                { USB_DEVICE(0x0c45, 0x60ab), },
                { }
        };
index 9ecb090..cb1b318 100644 (file)
@@ -1,8 +1,8 @@
 /***************************************************************************
- * Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera  *
+ * Plug-in for TAS5130D1B image sensor connected to the SN9C1xx PC Camera  *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -65,7 +65,7 @@ static int tas5130d1b_set_ctrl(struct sn9c102_device* cam,
 static int tas5130d1b_set_crop(struct sn9c102_device* cam,
                               const struct v4l2_rect* rect)
 {
-       struct sn9c102_sensor* s = &tas5130d1b;
+       struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
        u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 104,
           v_start = (u8)(rect->top - s->cropcap.bounds.top) + 12;
        int err = 0;
@@ -99,6 +99,7 @@ static int tas5130d1b_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor tas5130d1b = {
        .name = "TAS5130D1B",
        .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+       .supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
        .sysfs_ops = SN9C102_I2C_WRITE,
        .frequency = SN9C102_I2C_100KHZ,
        .interface = SN9C102_I2C_3WIRES,
@@ -154,6 +155,7 @@ static struct sn9c102_sensor tas5130d1b = {
 int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam)
 {
        const struct usb_device_id tas5130d1b_id_table[] = {
+               { USB_DEVICE(0x0c45, 0x6024), },
                { USB_DEVICE(0x0c45, 0x6025), },
                { USB_DEVICE(0x0c45, 0x60aa), },
                { }