9 = /dev/urandom Faster, less secure random number gen.
10 = /dev/aio Asynchronous I/O notification interface
11 = /dev/kmsg Writes to this come out as printk's
+ 12 = /dev/oldmem Used by crashdump kernels to access
+ the memory of the kernel that crashed.
1 block RAM disk
0 = /dev/ram0 First RAM disk
--- /dev/null
+
+LOCK STATISTICS
+
+- WHAT
+
+As the name suggests, it provides statistics on locks.
+
+- WHY
+
+Because things like lock contention can severely impact performance.
+
+- HOW
+
+Lockdep already has hooks in the lock functions and maps lock instances to
+lock classes. We build on that. The graph below shows the relation between
+the lock functions and the various hooks therein.
+
+ __acquire
+ |
+ lock _____
+ | \
+ | __contended
+ | |
+ | <wait>
+ | _______/
+ |/
+ |
+ __acquired
+ |
+ .
+ <hold>
+ .
+ |
+ __release
+ |
+ unlock
+
+lock, unlock - the regular lock functions
+__* - the hooks
+<> - states
+
+With these hooks we provide the following statistics:
+
+ con-bounces - number of lock contention that involved x-cpu data
+ contentions - number of lock acquisitions that had to wait
+ wait time min - shortest (non-0) time we ever had to wait for a lock
+ max - longest time we ever had to wait for a lock
+ total - total time we spend waiting on this lock
+ acq-bounces - number of lock acquisitions that involved x-cpu data
+ acquisitions - number of times we took the lock
+ hold time min - shortest (non-0) time we ever held the lock
+ max - longest time we ever held the lock
+ total - total time this lock was held
+
+From these number various other statistics can be derived, such as:
+
+ hold time average = hold time total / acquisitions
+
+These numbers are gathered per lock class, per read/write state (when
+applicable).
+
+It also tracks 4 contention points per class. A contention point is a call site
+that had to wait on lock acquisition.
+
+ - USAGE
+
+Look at the current lock statistics:
+
+( line numbers not part of actual output, done for clarity in the explanation
+ below )
+
+# less /proc/lock_stat
+
+01 lock_stat version 0.2
+02 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+03 class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total
+04 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+05
+06 &inode->i_data.tree_lock-W: 15 21657 0.18 1093295.30 11547131054.85 58 10415 0.16 87.51 6387.60
+07 &inode->i_data.tree_lock-R: 0 0 0.00 0.00 0.00 23302 231198 0.25 8.45 98023.38
+08 --------------------------
+09 &inode->i_data.tree_lock 0 [<ffffffff8027c08f>] add_to_page_cache+0x5f/0x190
+10
+11 ...............................................................................................................................................................................................
+12
+13 dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24
+14 -----------
+15 dcache_lock 180 [<ffffffff802c0d7e>] sys_getcwd+0x11e/0x230
+16 dcache_lock 165 [<ffffffff802c002a>] d_alloc+0x15a/0x210
+17 dcache_lock 33 [<ffffffff8035818d>] _atomic_dec_and_lock+0x4d/0x70
+18 dcache_lock 1 [<ffffffff802beef8>] shrink_dcache_parent+0x18/0x130
+
+This excerpt shows the first two lock class statistics. Line 01 shows the
+output version - each time the format changes this will be updated. Line 02-04
+show the header with column descriptions. Lines 05-10 and 13-18 show the actual
+statistics. These statistics come in two parts; the actual stats separated by a
+short separator (line 08, 14) from the contention points.
+
+The first lock (05-10) is a read/write lock, and shows two lines above the
+short separator. The contention points don't match the column descriptors,
+they have two: contentions and [<IP>] symbol.
+
+
+View the top contending locks:
+
+# grep : /proc/lock_stat | head
+ &inode->i_data.tree_lock-W: 15 21657 0.18 1093295.30 11547131054.85 58 10415 0.16 87.51 6387.60
+ &inode->i_data.tree_lock-R: 0 0 0.00 0.00 0.00 23302 231198 0.25 8.45 98023.38
+ dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24
+ &inode->i_mutex: 161 286 18446744073709 62882.54 1244614.55 3653 20598 18446744073709 62318.60 1693822.74
+ &zone->lru_lock: 94 94 0.53 7.33 92.10 4366 32690 0.29 59.81 16350.06
+ &inode->i_data.i_mmap_lock: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44
+ &q->__queue_lock: 48 50 0.52 31.62 86.31 774 13131 0.17 113.08 12277.52
+ &rq->rq_lock_key: 43 47 0.74 68.50 170.63 3706 33929 0.22 107.99 17460.62
+ &rq->rq_lock_key#2: 39 46 0.75 6.68 49.03 2979 32292 0.17 125.17 17137.63
+ tasklist_lock-W: 15 15 1.45 10.87 32.70 1201 7390 0.58 62.55 13648.47
+
+Clear the statistics:
+
+# echo 0 > /proc/lock_stat
keyboards may not have a key labeled 'SysRq'. The 'SysRq' key is
also known as the 'Print Screen' key. Also some keyboards cannot
handle so many keys being pressed at the same time, so you might
- have better luck with "press Alt", "press SysRq", "release Alt",
+ have better luck with "press Alt", "press SysRq", "release SysRq",
"press <command key>", release everything.
On SPARC - You press 'ALT-STOP-<command key>', I believe.
as a driver attribute (see below).
Sysfs driver attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/bus/platform/drivers/thinkpad_acpi/.
+for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and
+/sys/bus/platform/drivers/thinkpad_hwmon/
-Sysfs device attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/devices/platform/thinkpad_acpi/.
+Sysfs device attributes are on the thinkpad_acpi device sysfs attribute
+space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/.
+
+Sysfs device attributes for the sensors and fan are on the
+thinkpad_hwmon device's sysfs attribute space, but you should locate it
+looking for a hwmon device with the name attribute of "thinkpad".
Driver version
--------------
-------------------
procfs: /proc/acpi/ibm/thermal
-sysfs device attributes: (hwmon) temp*_input
+sysfs device attributes: (hwmon "thinkpad") temp*_input
Most ThinkPads include six or more separate temperature sensors but only
expose the CPU temperature through the standard ACPI methods. This
---------------------------------------------------------
procfs: /proc/acpi/ibm/fan
-sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable
+sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
+ pwm1_enable
+sysfs hwmon driver attributes: fan_watchdog
NOTE NOTE NOTE: fan control operations are disabled by default for
safety reasons. To enable them, the module parameter "fan_control=1"
which can take up to two minutes. May return rubbish on older
ThinkPads.
-driver attribute fan_watchdog:
+hwmon driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
layer, the radio switch generates input event EV_RADIO,
and the driver enables hot key handling by default in
the firmware.
+
+0x020000: ABI fix: added a separate hwmon platform device and
+ driver, which must be located by name (thinkpad)
+ and the hwmon class for libsensors4 (lm-sensors 3)
+ compatibility. Moved all hwmon attributes to this
+ new platform device.
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 23
-EXTRAVERSION =-rc8
+EXTRAVERSION =
NAME = Arr Matey! A Hairy Bilge Rat!
# *DOCUMENTATION*
* pcibios_fixup_bus - Called after each bus is probed,
* but before its children are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_sys_data *root = bus->sysdata;
struct pci_dev *dev;
/*
* Convert from Linux-centric to bus-centric addresses for bridge devices.
*/
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
{
+ unsigned int tmp;
+
pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+ /* ensure correct NAND slot is selected on resume */
+ if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+ tmp |= 2;
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+ /* ensure that an nRESET is not generated on resume. */
+ s3c2410_gpio_setpin(S3C2410_GPA21, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+
return 0;
}
if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+ __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+ s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+
return 0;
}
#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <linux/irq.h>
#ifdef BF533_FAMILY
};
#endif
-static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
+char *str_ident = NULL;
+
+#define RESOURCE_LABEL_SIZE 16
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
return 0;
}
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident + ident * RESOURCE_LABEL_SIZE, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident * RESOURCE_LABEL_SIZE +
+ RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (str_ident[ident * RESOURCE_LABEL_SIZE] ?
+ (str_ident + ident * RESOURCE_LABEL_SIZE) : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident + ident * RESOURCE_LABEL_SIZE,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
#ifdef BF537_FAMILY
static void port_setup(unsigned short gpio, unsigned short usage)
{
- if (usage == GPIO_USAGE) {
- if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
- printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
- *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
- } else
- *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
- SSYNC();
+ if (!check_gpio(gpio)) {
+ if (usage == GPIO_USAGE) {
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ } else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+ }
}
#else
# define port_setup(...) do { } while (0)
#endif
+#ifdef BF537_FAMILY
+
+#define PMUX_LUT_RES 0
+#define PMUX_LUT_OFFSET 1
+#define PMUX_LUT_ENTRIES 41
+#define PMUX_LUT_SIZE 2
+
+static unsigned short port_mux_lut[PMUX_LUT_ENTRIES][PMUX_LUT_SIZE] = {
+ {P_PPI0_D13, 11}, {P_PPI0_D14, 11}, {P_PPI0_D15, 11},
+ {P_SPORT1_TFS, 11}, {P_SPORT1_TSCLK, 11}, {P_SPORT1_DTPRI, 11},
+ {P_PPI0_D10, 10}, {P_PPI0_D11, 10}, {P_PPI0_D12, 10},
+ {P_SPORT1_RSCLK, 10}, {P_SPORT1_RFS, 10}, {P_SPORT1_DRPRI, 10},
+ {P_PPI0_D8, 9}, {P_PPI0_D9, 9}, {P_SPORT1_DRSEC, 9},
+ {P_SPORT1_DTSEC, 9}, {P_TMR2, 8}, {P_PPI0_FS3, 8}, {P_TMR3, 7},
+ {P_SPI0_SSEL4, 7}, {P_TMR4, 6}, {P_SPI0_SSEL5, 6}, {P_TMR5, 5},
+ {P_SPI0_SSEL6, 5}, {P_UART1_RX, 4}, {P_UART1_TX, 4}, {P_TMR6, 4},
+ {P_TMR7, 4}, {P_UART0_RX, 3}, {P_UART0_TX, 3}, {P_DMAR0, 3},
+ {P_DMAR1, 3}, {P_SPORT0_DTSEC, 1}, {P_SPORT0_DRSEC, 1},
+ {P_CAN0_RX, 1}, {P_CAN0_TX, 1}, {P_SPI0_SSEL7, 1},
+ {P_SPORT0_TFS, 0}, {P_SPORT0_DTPRI, 0}, {P_SPI0_SSEL2, 0},
+ {P_SPI0_SSEL3, 0}
+};
+
+static void portmux_setup(unsigned short per, unsigned short function)
+{
+ u16 y, muxreg, offset;
+
+ for (y = 0; y < PMUX_LUT_ENTRIES; y++) {
+ if (port_mux_lut[y][PMUX_LUT_RES] == per) {
+
+ /* SET PORTMUX REG */
+
+ offset = port_mux_lut[y][PMUX_LUT_OFFSET];
+ muxreg = bfin_read_PORT_MUX();
+
+ if (offset != 1) {
+ muxreg &= ~(1 << offset);
+ } else {
+ muxreg &= ~(3 << 1);
+ }
+
+ muxreg |= (function << offset);
+ bfin_write_PORT_MUX(muxreg);
+ }
+ }
+}
+
+#else
+# define portmux_setup(...) do { } while (0)
+#endif
static void default_gpio(unsigned short gpio)
{
static int __init bfin_gpio_init(void)
{
- int i;
-
- printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
- reserved_map[gpio_bank(i)] = 0;
+ str_ident = kzalloc(RESOURCE_LABEL_SIZE * 256, GFP_KERNEL);
+ if (!str_ident)
+ return -ENOMEM;
-#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-# if defined(CONFIG_BFIN_MAC_RMII)
- reserved_map[gpio_bank(PORT_H)] = 0xC373;
-# else
- reserved_map[gpio_bank(PORT_H)] = 0xFFFF;
-# endif
-#endif
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
+
}
arch_initcall(bfin_gpio_init);
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
unsigned long flags; \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
local_irq_save(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
void set_gpio_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
if (arg)
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
bfin_read_CHIPID();
#else
void set_gpio_toggle(unsigned short gpio)
{
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
}
#endif
{
unsigned long flags;
unsigned short ret;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
bfin_read_CHIPID();
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
- gpio_bank_saved[bank].reserved = reserved_map[bank];
+ gpio_bank_saved[bank].reserved =
+ reserved_gpio_map[bank];
gpio = i;
while (mask) {
if (mask & 1) {
- reserved_map[gpio_bank(gpio)] |=
+ reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
wakeup_flags_map[gpio]);
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
- reserved_map[bank] = gpio_bank_saved[bank].reserved;
+ reserved_gpio_map[bank] =
+ gpio_bank_saved[bank].reserved;
}
#endif
+
+
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ local_irq_save(flags);
+
+ if (!check_gpio(ident)) {
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!(per & P_MAYSHARE)) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already"
+ "reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per),
+ get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+anyway:
+
+
+ portmux_setup(per, P_FUNCT2MUX(per));
+
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ ret = peripheral_request(per[cnt], label);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (check_gpio(ident) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_peri_map[gpio_bank(ident)]
+ & gpio_bit(ident)))) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ if (!(per & P_MAYSHARE)) {
+ port_setup(ident, GPIO_USAGE);
+ }
+
+ reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(unsigned short per[])
+{
+ u16 cnt;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ peripheral_free(per[cnt]);
+ }
+
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
local_irq_save(flags);
- if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
- reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
local_irq_save(flags);
- if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
default_gpio(gpio);
- reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
ALIGN
ENTRY(_sys_call_table)
- .long _sys_ni_syscall /* 0 - old "setup()" system call*/
+ .long _sys_restart_syscall /* 0 */
.long _sys_exit
.long _sys_fork
.long _sys_read
.long _sys_sched_get_priority_min /* 160 */
.long _sys_sched_rr_get_interval
.long _sys_nanosleep
- .long _sys_ni_syscall /* sys_mremap */
+ .long _sys_mremap
.long _sys_setresuid /* setresuid16 */
.long _sys_getresuid /* getresuid16 */ /* 165 */
.long _sys_ni_syscall /* for vm86 */
.long _sys_ni_syscall /* old "query_module" */
.long _sys_ni_syscall /* sys_poll */
- .long _sys_ni_syscall /* sys_nfsservctl */
+ .long _sys_nfsservctl
.long _sys_setresgid /* setresgid16 */ /* 170 */
.long _sys_getresgid /* getresgid16 */
.long _sys_prctl
.long _sys_ni_syscall /* reserved for TUX */
.long _sys_ni_syscall
.long _sys_gettid
- .long _sys_ni_syscall /* 225 */ /* sys_readahead */
+ .long _sys_readahead /* 225 */
.long _sys_setxattr
.long _sys_lsetxattr
.long _sys_fsetxattr
.long _sys_shmctl
.long _sys_shmdt /* 340 */
.long _sys_shmget
+ .long _sys_splice
+ .long _sys_sync_file_range
+ .long _sys_tee
+ .long _sys_vmsplice /* 345 */
+ .long _sys_epoll_pwait
+ .long _sys_utimensat
+ .long _sys_signalfd
+ .long _sys_timerfd
+ .long _sys_eventfd /* 350 */
+ .long _sys_pread64
+ .long _sys_pwrite64
+ .long _sys_fadvise64
+ .long _sys_set_robust_list
+ .long _sys_get_robust_list /* 355 */
+ .long _sys_fallocate
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
do {
size = sizeof(struct e820entry);
- id = SMAP;
+
+ /* Important: %edx is clobbered by some BIOSes,
+ so it must be either used for the error output
+ or explicitly marked clobbered. */
asm("int $0x15; setc %0"
- : "=am" (err), "+b" (next), "+d" (id), "+c" (size),
+ : "=d" (err), "+b" (next), "=a" (id), "+c" (size),
"=m" (*desc)
- : "D" (desc), "a" (0xe820));
+ : "D" (desc), "d" (SMAP), "a" (0xe820));
/* Some BIOSes stop returning SMAP in the middle of
the search loop. We don't know exactly how the BIOS
/* Module parameters */
static int scale_voltage;
static int disable_acpi_c3;
+static int revid_errata;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Setup new frequency */
- longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+ if (!revid_errata)
+ longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+ else
+ longhaul.bits.RevisionKey = 0;
longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
/* Setup new voltage */
dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
-
+retry_loop:
preempt_disable();
local_irq_save(flags);
preempt_enable();
freqs.new = calc_speed(longhaul_get_cpu_mult());
+ /* Check if requested frequency is set. */
+ if (unlikely(freqs.new != speed)) {
+ printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+ /* Revision ID = 1 but processor is expecting revision key
+ * equal to 0. Jumpers at the bottom of processor will change
+ * multiplier and FSB, but will not change bits in Longhaul
+ * MSR nor enable voltage scaling. */
+ if (!revid_errata) {
+ printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
+ "option.\n");
+ revid_errata = 1;
+ msleep(200);
+ goto retry_loop;
+ }
+ /* Why ACPI C3 sometimes doesn't work is a mystery for me.
+ * But it does happen. Processor is entering ACPI C3 state,
+ * but it doesn't change frequency. I tried poking various
+ * bits in northbridge registers, but without success. */
+ if (longhaul_flags & USE_ACPI_C3) {
+ printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+ longhaul_flags &= ~USE_ACPI_C3;
+ if (revid_errata) {
+ printk(KERN_INFO PFX "Disabling \"Ignore "
+ "Revision ID\" option.\n");
+ revid_errata = 0;
+ }
+ msleep(200);
+ goto retry_loop;
+ }
+ /* This shouldn't happen. Longhaul ver. 2 was reported not
+ * working on processors without voltage scaling, but with
+ * RevID = 1. RevID errata will make things right. Just
+ * to be 100% sure. */
+ if (longhaul_version == TYPE_LONGHAUL_V2) {
+ printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+ longhaul_version = TYPE_LONGHAUL_V1;
+ msleep(200);
+ goto retry_loop;
+ }
+ }
+ /* Report true CPU frequency */
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
if (!bm_timeout)
kfree(longhaul_table);
}
+/* Even if BIOS is exporting ACPI C3 state, and it is used
+ * with success when CPU is idle, this state doesn't
+ * trigger frequency transition in some cases. */
module_param (disable_acpi_c3, int, 0644);
MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
-
+/* Change CPU voltage with frequency. Very usefull to save
+ * power, but most VIA C3 processors aren't supporting it. */
module_param (scale_voltage, int, 0644);
MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
+/* Force revision key to 0 for processors which doesn't
+ * support voltage scaling, but are introducing itself as
+ * such. */
+module_param(revid_errata, int, 0644);
+MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
printk(KERN_ERR "Unable to ioremap pci space\n");
return 1;
}
+ au1x_controller.io_map_base = virt_io_addr;
#ifdef CONFIG_DMA_NONCOHERENT
{
void __init board_setup(void)
{
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
// enable USB power switch
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
au_writel( 0x100000, GPIO2_OUTPUT );
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
au_writel(0, SYS_PINSTATERD);
udelay(100);
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
// make gpio 15 an input (for interrupt line)
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
au_writel(0, SYS_PININPUTEN);
udelay(100);
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
{
u32 pin_func, sys_freqctrl, sys_clksrc;
pin_func |= 0x8000;
au_writel(pin_func, SYS_PINFUNC);
}
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
// 2nd USB port is USB host
pin_func |= 0x8000;
au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI)
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
PTR compat_sys_signalfd
PTR compat_sys_timerfd
PTR sys_eventfd
- PTR sys_fallocate /* 4320 */
+ PTR sys32_fallocate /* 4320 */
.size sys_call_table,.-sys_call_table
__dbe_table : { *(__dbe_table) }
__stop___dbe_table = .;
+ NOTES
+
RODATA
/* writeable */
}
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
- build_insn_word(0x3c01a000); /* lui $at, 0xa000 */
+ build_insn_word(0x8c200000); /* lw $zero, ($at) */
mi.c_format.opcode = cache_op;
mi.c_format.rs = 4; /* $a0 */
* 4 N/C
*/
-#define chkslot(_bus,_devfn) \
-do { \
- if ((_bus)->number > 0 || PCI_SLOT (_devfn) < 1 \
- || PCI_SLOT (_devfn) > 3) \
- return PCIBIOS_DEVICE_NOT_FOUND; \
-} while (0)
+static inline int mkaddr(struct pci_bus *bus, unsigned int devfn,
+ unsigned int reg)
+{
+ return ((bus->number & 0xff) << 16) |
+ ((devfn & 0xff) << 8) |
+ (reg & 0xfc);
+}
-#define mkaddr(_devfn, _reg) \
-((((_devfn) & 0xffUL) << 8) | ((_reg) & 0xfcUL))
static int
mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
{
- chkslot(bus, devfn);
- mace->pci.config_addr = mkaddr(devfn, reg);
+ mace->pci.config_addr = mkaddr(bus, devfn, reg);
switch (size) {
case 1:
*val = mace->pci.config_data.b[(reg & 3) ^ 3];
mace_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 val)
{
- chkslot(bus, devfn);
- mace->pci.config_addr = mkaddr(devfn, reg);
+ mace->pci.config_addr = mkaddr(bus, devfn, reg);
switch (size) {
case 1:
mace->pci.config_data.b[(reg & 3) ^ 3] = val;
static int __init uart8250_init(void)
{
- uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1;
- uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1;
+ uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
+ uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
return platform_device_register(&uart8250_device);
}
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
+ dr_mode = "peripheral";
phy_type = "ulpi";
};
if (port0_is_dr)
printk(KERN_WARNING
"834x USB port0 can't be used by both DR and MPH!\n");
- sicrl |= MPC834X_SICRL_USB0;
+ sicrl &= ~MPC834X_SICRL_USB0;
}
prop = of_get_property(np, "port1", NULL);
if (prop) {
if (port1_is_dr)
printk(KERN_WARNING
"834x USB port1 can't be used by both DR and MPH!\n");
- sicrl |= MPC834X_SICRL_USB1;
+ sicrl &= ~MPC834X_SICRL_USB1;
}
of_node_put(np);
}
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- irq_server = get_irq_server(irq, 1);
+ irq_server = get_irq_server(virq, 1);
if (irq_server == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
{
return (dpram_pbase + (uint)(addr - dpram_vbase));
}
-EXPORT_SYMBOL(cpm_dpram_addr);
+EXPORT_SYMBOL(cpm_dpram_phys);
void *cpm_dpram_addr(unsigned long offset)
{
- return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
+ return (void *)(dpram_vbase + offset);
}
EXPORT_SYMBOL(cpm_dpram_addr);
dev->prom_node = dp;
regs = of_get_property(dp, "reg", &len);
+ if (!regs)
+ len = 0;
if (len % sizeof(struct linux_prom_registers)) {
prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
dev->prom_node->name, len,
get_user(c,p++);
} while (c);
}
- put_user(NULL,argv);
+ put_user(0,argv);
current->mm->arg_end = current->mm->env_start = (unsigned long) p;
while (envc-->0) {
char c;
get_user(c,p++);
} while (c);
}
- put_user(NULL,envp);
+ put_user(0,envp);
current->mm->env_end = (unsigned long) p;
return sp;
}
dev->num_addrs = 0;
dev->num_irqs = 0;
} else {
- (void) of_get_property(dp, "reg", &len);
+ const int *regs = of_get_property(dp, "reg", &len);
+
+ if (!regs)
+ len = 0;
dev->num_addrs = len / sizeof(struct linux_prom_registers);
for (i = 0; i < dev->num_addrs; i++)
unsigned int func = PCI_FUNC(devfn);
unsigned long ret;
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
+ if (!bus && devfn == 0x00)
return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
size, value);
if (config_out_of_range(pbm, bus, devfn, where)) {
unsigned int func = PCI_FUNC(devfn);
unsigned long ret;
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
+ if (!bus && devfn == 0x00)
return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
size, value);
if (config_out_of_range(pbm, bus, devfn, where)) {
if (!strcmp(dp->name, "fhc") &&
!strcmp(dp->parent->name, "central"))
return central_irq_trans_init(dp);
- if (!strcmp(dp->name, "virtual-devices"))
+ if (!strcmp(dp->name, "virtual-devices") ||
+ !strcmp(dp->name, "niu"))
return sun4v_vdev_irq_trans_init(dp);
}
int timeout, ret;
p = fork_idle(cpu);
+ if (IS_ERR(p))
+ return PTR_ERR(p);
callin_flag = 0;
cpu_new_thread = task_thread_info(p);
}
vdev->dp = dp;
- printk(KERN_ERR "VIO: Adding device %s\n", vdev->dev.bus_id);
+ printk(KERN_INFO "VIO: Adding device %s\n", vdev->dev.bus_id);
err = device_register(&vdev->dev);
if (err) {
.node_name = "virtual-device-port",
};
+/* We are only interested in domain service ports under the
+ * "domain-services" node. On control nodes there is another port
+ * under "openboot" that we should not mess with as aparently that is
+ * reserved exclusively for OBP use.
+ */
+static void vio_add_ds(struct mdesc_handle *hp, u64 node)
+{
+ int found;
+ u64 a;
+
+ found = 0;
+ mdesc_for_each_arc(a, hp, node, MDESC_ARC_TYPE_BACK) {
+ u64 target = mdesc_arc_target(hp, a);
+ const char *name = mdesc_node_name(hp, target);
+
+ if (!strcmp(name, "domain-services")) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found)
+ (void) vio_create_one(hp, node, &root_vdev->dev);
+}
+
static struct mdesc_notifier_client vio_ds_notifier = {
- .add = vio_add,
+ .add = vio_add_ds,
.remove = vio_remove,
.node_name = "domain-services-port",
};
/* NGcopy_from_user.S: Niagara optimized copy from userspace.
*
- * Copyright (C) 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#define EX_LD(x) \
.section .fixup; \
.align 4; \
99: wr %g0, ASI_AIUS, %asi;\
- retl; \
- mov 1, %o0; \
+ ret; \
+ restore %g0, 1, %o0; \
.section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
#define LOAD(type,addr,dest) type##a [addr] ASI_AIUS, dest
#define LOAD_TWIN(addr_reg,dest0,dest1) \
ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_AIUS, dest0
-#define EX_RETVAL(x) 0
+#define EX_RETVAL(x) %g0
#ifdef __KERNEL__
#define PREAMBLE \
/* NGcopy_to_user.S: Niagara optimized copy to userspace.
*
- * Copyright (C) 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#define EX_ST(x) \
.section .fixup; \
.align 4; \
99: wr %g0, ASI_AIUS, %asi;\
- retl; \
- mov 1, %o0; \
+ ret; \
+ restore %g0, 1, %o0; \
.section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
#define FUNC_NAME NGcopy_to_user
#define STORE(type,src,addr) type##a src, [addr] ASI_AIUS
#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_AIUS
-#define EX_RETVAL(x) 0
+#define EX_RETVAL(x) %g0
#ifdef __KERNEL__
/* Writing to %asi is _expensive_ so we hardcode it.
/* NGmemcpy.S: Niagara optimized memcpy.
*
- * Copyright (C) 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#ifdef __KERNEL__
wr %g0, ASI_PNF, %asi
#endif
+#ifdef __sparc_v9__
+#define SAVE_AMOUNT 128
+#else
+#define SAVE_AMOUNT 64
+#endif
+
#ifndef STORE_ASI
#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P
#endif
#endif
#ifndef STORE_INIT
+#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA
#define STORE_INIT(src,addr) stxa src, [addr] %asi
+#else
+#define STORE_INIT(src,addr) stx src, [addr + 0x00]
+#endif
#endif
#ifndef FUNC_NAME
.globl FUNC_NAME
.type FUNC_NAME,#function
-FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
- srlx %o2, 31, %g2
+FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */
+ PREAMBLE
+ save %sp, -SAVE_AMOUNT, %sp
+ srlx %i2, 31, %g2
cmp %g2, 0
tne %xcc, 5
- PREAMBLE
- mov %o0, GLOBAL_SPARE
- cmp %o2, 0
+ mov %i0, %o0
+ cmp %i2, 0
be,pn %XCC, 85f
- or %o0, %o1, %o3
- cmp %o2, 16
+ or %o0, %i1, %i3
+ cmp %i2, 16
blu,a,pn %XCC, 80f
- or %o3, %o2, %o3
+ or %i3, %i2, %i3
/* 2 blocks (128 bytes) is the minimum we can do the block
* copy with. We need to ensure that we'll iterate at least
* to (64 - 1) bytes from the length before we perform the
* block copy loop.
*/
- cmp %o2, (2 * 64)
+ cmp %i2, (2 * 64)
blu,pt %XCC, 70f
- andcc %o3, 0x7, %g0
+ andcc %i3, 0x7, %g0
/* %o0: dst
- * %o1: src
- * %o2: len (known to be >= 128)
+ * %i1: src
+ * %i2: len (known to be >= 128)
*
- * The block copy loops will use %o4/%o5,%g2/%g3 as
+ * The block copy loops will use %i4/%i5,%g2/%g3 as
* temporaries while copying the data.
*/
- LOAD(prefetch, %o1, #one_read)
+ LOAD(prefetch, %i1, #one_read)
wr %g0, STORE_ASI, %asi
/* Align destination on 64-byte boundary. */
- andcc %o0, (64 - 1), %o4
+ andcc %o0, (64 - 1), %i4
be,pt %XCC, 2f
- sub %o4, 64, %o4
- sub %g0, %o4, %o4 ! bytes to align dst
- sub %o2, %o4, %o2
-1: subcc %o4, 1, %o4
- EX_LD(LOAD(ldub, %o1, %g1))
+ sub %i4, 64, %i4
+ sub %g0, %i4, %i4 ! bytes to align dst
+ sub %i2, %i4, %i2
+1: subcc %i4, 1, %i4
+ EX_LD(LOAD(ldub, %i1, %g1))
EX_ST(STORE(stb, %g1, %o0))
- add %o1, 1, %o1
+ add %i1, 1, %i1
bne,pt %XCC, 1b
add %o0, 1, %o0
* aligned store data at a time, this is easy to ensure.
*/
2:
- andcc %o1, (16 - 1), %o4
- andn %o2, (64 - 1), %g1 ! block copy loop iterator
- sub %o2, %g1, %o2 ! final sub-block copy bytes
+ andcc %i1, (16 - 1), %i4
+ andn %i2, (64 - 1), %g1 ! block copy loop iterator
be,pt %XCC, 50f
- cmp %o4, 8
- be,a,pt %XCC, 10f
- sub %o1, 0x8, %o1
+ sub %i2, %g1, %i2 ! final sub-block copy bytes
+
+ cmp %i4, 8
+ be,pt %XCC, 10f
+ sub %i1, %i4, %i1
/* Neither 8-byte nor 16-byte aligned, shift and mask. */
- mov %g1, %o4
- and %o1, 0x7, %g1
- sll %g1, 3, %g1
- mov 64, %o3
- andn %o1, 0x7, %o1
- EX_LD(LOAD(ldx, %o1, %g2))
- sub %o3, %g1, %o3
- sllx %g2, %g1, %g2
+ and %i4, 0x7, GLOBAL_SPARE
+ sll GLOBAL_SPARE, 3, GLOBAL_SPARE
+ mov 64, %i5
+ EX_LD(LOAD_TWIN(%i1, %g2, %g3))
+ sub %i5, GLOBAL_SPARE, %i5
+ mov 16, %o4
+ mov 32, %o5
+ mov 48, %o7
+ mov 64, %i3
+
+ bg,pn %XCC, 9f
+ nop
-#define SWIVEL_ONE_DWORD(SRC, TMP1, TMP2, PRE_VAL, PRE_SHIFT, POST_SHIFT, DST)\
- EX_LD(LOAD(ldx, SRC, TMP1)); \
- srlx TMP1, PRE_SHIFT, TMP2; \
- or TMP2, PRE_VAL, TMP2; \
- EX_ST(STORE_INIT(TMP2, DST)); \
- sllx TMP1, POST_SHIFT, PRE_VAL;
-
-1: add %o1, 0x8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x00)
- add %o1, 0x8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x08)
- add %o1, 0x8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x10)
- add %o1, 0x8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x18)
- add %o1, 32, %o1
- LOAD(prefetch, %o1, #one_read)
- sub %o1, 32 - 8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x20)
- add %o1, 8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x28)
- add %o1, 8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x30)
- add %o1, 8, %o1
- SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x38)
- subcc %o4, 64, %o4
- bne,pt %XCC, 1b
+#define MIX_THREE_WORDS(WORD1, WORD2, WORD3, PRE_SHIFT, POST_SHIFT, TMP) \
+ sllx WORD1, POST_SHIFT, WORD1; \
+ srlx WORD2, PRE_SHIFT, TMP; \
+ sllx WORD2, POST_SHIFT, WORD2; \
+ or WORD1, TMP, WORD1; \
+ srlx WORD3, PRE_SHIFT, TMP; \
+ or WORD2, TMP, WORD2;
+
+8: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3))
+ MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1)
+ LOAD(prefetch, %i1 + %i3, #one_read)
+
+ EX_ST(STORE_INIT(%g2, %o0 + 0x00))
+ EX_ST(STORE_INIT(%g3, %o0 + 0x08))
+
+ EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3))
+ MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1)
+
+ EX_ST(STORE_INIT(%o2, %o0 + 0x10))
+ EX_ST(STORE_INIT(%o3, %o0 + 0x18))
+
+ EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
+ MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1)
+
+ EX_ST(STORE_INIT(%g2, %o0 + 0x20))
+ EX_ST(STORE_INIT(%g3, %o0 + 0x28))
+
+ EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3))
+ add %i1, 64, %i1
+ MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1)
+
+ EX_ST(STORE_INIT(%o2, %o0 + 0x30))
+ EX_ST(STORE_INIT(%o3, %o0 + 0x38))
+
+ subcc %g1, 64, %g1
+ bne,pt %XCC, 8b
add %o0, 64, %o0
-#undef SWIVEL_ONE_DWORD
+ ba,pt %XCC, 60f
+ add %i1, %i4, %i1
+
+9: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3))
+ MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1)
+ LOAD(prefetch, %i1 + %i3, #one_read)
+
+ EX_ST(STORE_INIT(%g3, %o0 + 0x00))
+ EX_ST(STORE_INIT(%o2, %o0 + 0x08))
+
+ EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3))
+ MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1)
+
+ EX_ST(STORE_INIT(%o3, %o0 + 0x10))
+ EX_ST(STORE_INIT(%g2, %o0 + 0x18))
+
+ EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
+ MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1)
+
+ EX_ST(STORE_INIT(%g3, %o0 + 0x20))
+ EX_ST(STORE_INIT(%o2, %o0 + 0x28))
+
+ EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3))
+ add %i1, 64, %i1
+ MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1)
+
+ EX_ST(STORE_INIT(%o3, %o0 + 0x30))
+ EX_ST(STORE_INIT(%g2, %o0 + 0x38))
+
+ subcc %g1, 64, %g1
+ bne,pt %XCC, 9b
+ add %o0, 64, %o0
- srl %g1, 3, %g1
ba,pt %XCC, 60f
- add %o1, %g1, %o1
+ add %i1, %i4, %i1
10: /* Destination is 64-byte aligned, source was only 8-byte
* aligned but it has been subtracted by 8 and we perform
* one twin load ahead, then add 8 back into source when
* we finish the loop.
*/
- EX_LD(LOAD_TWIN(%o1, %o4, %o5))
-1: add %o1, 16, %o1
- EX_LD(LOAD_TWIN(%o1, %g2, %g3))
- add %o1, 16 + 32, %o1
- LOAD(prefetch, %o1, #one_read)
- sub %o1, 32, %o1
+ EX_LD(LOAD_TWIN(%i1, %o4, %o5))
+ mov 16, %o7
+ mov 32, %g2
+ mov 48, %g3
+ mov 64, %o1
+1: EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
+ LOAD(prefetch, %i1 + %o1, #one_read)
EX_ST(STORE_INIT(%o5, %o0 + 0x00)) ! initializes cache line
- EX_ST(STORE_INIT(%g2, %o0 + 0x08))
- EX_LD(LOAD_TWIN(%o1, %o4, %o5))
- add %o1, 16, %o1
- EX_ST(STORE_INIT(%g3, %o0 + 0x10))
+ EX_ST(STORE_INIT(%o2, %o0 + 0x08))
+ EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5))
+ EX_ST(STORE_INIT(%o3, %o0 + 0x10))
EX_ST(STORE_INIT(%o4, %o0 + 0x18))
- EX_LD(LOAD_TWIN(%o1, %g2, %g3))
- add %o1, 16, %o1
+ EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3))
EX_ST(STORE_INIT(%o5, %o0 + 0x20))
- EX_ST(STORE_INIT(%g2, %o0 + 0x28))
- EX_LD(LOAD_TWIN(%o1, %o4, %o5))
- EX_ST(STORE_INIT(%g3, %o0 + 0x30))
+ EX_ST(STORE_INIT(%o2, %o0 + 0x28))
+ EX_LD(LOAD_TWIN(%i1 + %o1, %o4, %o5))
+ add %i1, 64, %i1
+ EX_ST(STORE_INIT(%o3, %o0 + 0x30))
EX_ST(STORE_INIT(%o4, %o0 + 0x38))
subcc %g1, 64, %g1
bne,pt %XCC, 1b
add %o0, 64, %o0
ba,pt %XCC, 60f
- add %o1, 0x8, %o1
+ add %i1, 0x8, %i1
50: /* Destination is 64-byte aligned, and source is 16-byte
* aligned.
*/
-1: EX_LD(LOAD_TWIN(%o1, %o4, %o5))
- add %o1, 16, %o1
- EX_LD(LOAD_TWIN(%o1, %g2, %g3))
- add %o1, 16 + 32, %o1
- LOAD(prefetch, %o1, #one_read)
- sub %o1, 32, %o1
+ mov 16, %o7
+ mov 32, %g2
+ mov 48, %g3
+ mov 64, %o1
+1: EX_LD(LOAD_TWIN(%i1 + %g0, %o4, %o5))
+ EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3))
+ LOAD(prefetch, %i1 + %o1, #one_read)
EX_ST(STORE_INIT(%o4, %o0 + 0x00)) ! initializes cache line
EX_ST(STORE_INIT(%o5, %o0 + 0x08))
- EX_LD(LOAD_TWIN(%o1, %o4, %o5))
- add %o1, 16, %o1
- EX_ST(STORE_INIT(%g2, %o0 + 0x10))
- EX_ST(STORE_INIT(%g3, %o0 + 0x18))
- EX_LD(LOAD_TWIN(%o1, %g2, %g3))
- add %o1, 16, %o1
+ EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5))
+ EX_ST(STORE_INIT(%o2, %o0 + 0x10))
+ EX_ST(STORE_INIT(%o3, %o0 + 0x18))
+ EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3))
+ add %i1, 64, %i1
EX_ST(STORE_INIT(%o4, %o0 + 0x20))
EX_ST(STORE_INIT(%o5, %o0 + 0x28))
- EX_ST(STORE_INIT(%g2, %o0 + 0x30))
- EX_ST(STORE_INIT(%g3, %o0 + 0x38))
+ EX_ST(STORE_INIT(%o2, %o0 + 0x30))
+ EX_ST(STORE_INIT(%o3, %o0 + 0x38))
subcc %g1, 64, %g1
bne,pt %XCC, 1b
add %o0, 64, %o0
60:
membar #Sync
- /* %o2 contains any final bytes still needed to be copied
+ /* %i2 contains any final bytes still needed to be copied
* over. If anything is left, we copy it one byte at a time.
*/
- RESTORE_ASI(%o3)
- brz,pt %o2, 85f
- sub %o0, %o1, %o3
+ RESTORE_ASI(%i3)
+ brz,pt %i2, 85f
+ sub %o0, %i1, %i3
ba,a,pt %XCC, 90f
.align 64
70: /* 16 < len <= 64 */
bne,pn %XCC, 75f
- sub %o0, %o1, %o3
+ sub %o0, %i1, %i3
72:
- andn %o2, 0xf, %o4
- and %o2, 0xf, %o2
-1: subcc %o4, 0x10, %o4
- EX_LD(LOAD(ldx, %o1, %o5))
- add %o1, 0x08, %o1
- EX_LD(LOAD(ldx, %o1, %g1))
- sub %o1, 0x08, %o1
- EX_ST(STORE(stx, %o5, %o1 + %o3))
- add %o1, 0x8, %o1
- EX_ST(STORE(stx, %g1, %o1 + %o3))
+ andn %i2, 0xf, %i4
+ and %i2, 0xf, %i2
+1: subcc %i4, 0x10, %i4
+ EX_LD(LOAD(ldx, %i1, %o4))
+ add %i1, 0x08, %i1
+ EX_LD(LOAD(ldx, %i1, %g1))
+ sub %i1, 0x08, %i1
+ EX_ST(STORE(stx, %o4, %i1 + %i3))
+ add %i1, 0x8, %i1
+ EX_ST(STORE(stx, %g1, %i1 + %i3))
bgu,pt %XCC, 1b
- add %o1, 0x8, %o1
-73: andcc %o2, 0x8, %g0
+ add %i1, 0x8, %i1
+73: andcc %i2, 0x8, %g0
be,pt %XCC, 1f
nop
- sub %o2, 0x8, %o2
- EX_LD(LOAD(ldx, %o1, %o5))
- EX_ST(STORE(stx, %o5, %o1 + %o3))
- add %o1, 0x8, %o1
-1: andcc %o2, 0x4, %g0
+ sub %i2, 0x8, %i2
+ EX_LD(LOAD(ldx, %i1, %o4))
+ EX_ST(STORE(stx, %o4, %i1 + %i3))
+ add %i1, 0x8, %i1
+1: andcc %i2, 0x4, %g0
be,pt %XCC, 1f
nop
- sub %o2, 0x4, %o2
- EX_LD(LOAD(lduw, %o1, %o5))
- EX_ST(STORE(stw, %o5, %o1 + %o3))
- add %o1, 0x4, %o1
-1: cmp %o2, 0
+ sub %i2, 0x4, %i2
+ EX_LD(LOAD(lduw, %i1, %i5))
+ EX_ST(STORE(stw, %i5, %i1 + %i3))
+ add %i1, 0x4, %i1
+1: cmp %i2, 0
be,pt %XCC, 85f
nop
ba,pt %xcc, 90f
sub %g1, 0x8, %g1
be,pn %icc, 2f
sub %g0, %g1, %g1
- sub %o2, %g1, %o2
+ sub %i2, %g1, %i2
1: subcc %g1, 1, %g1
- EX_LD(LOAD(ldub, %o1, %o5))
- EX_ST(STORE(stb, %o5, %o1 + %o3))
+ EX_LD(LOAD(ldub, %i1, %i5))
+ EX_ST(STORE(stb, %i5, %i1 + %i3))
bgu,pt %icc, 1b
- add %o1, 1, %o1
+ add %i1, 1, %i1
-2: add %o1, %o3, %o0
- andcc %o1, 0x7, %g1
+2: add %i1, %i3, %o0
+ andcc %i1, 0x7, %g1
bne,pt %icc, 8f
sll %g1, 3, %g1
- cmp %o2, 16
+ cmp %i2, 16
bgeu,pt %icc, 72b
nop
ba,a,pt %xcc, 73b
-8: mov 64, %o3
- andn %o1, 0x7, %o1
- EX_LD(LOAD(ldx, %o1, %g2))
- sub %o3, %g1, %o3
- andn %o2, 0x7, %o4
+8: mov 64, %i3
+ andn %i1, 0x7, %i1
+ EX_LD(LOAD(ldx, %i1, %g2))
+ sub %i3, %g1, %i3
+ andn %i2, 0x7, %i4
sllx %g2, %g1, %g2
-1: add %o1, 0x8, %o1
- EX_LD(LOAD(ldx, %o1, %g3))
- subcc %o4, 0x8, %o4
- srlx %g3, %o3, %o5
- or %o5, %g2, %o5
- EX_ST(STORE(stx, %o5, %o0))
+1: add %i1, 0x8, %i1
+ EX_LD(LOAD(ldx, %i1, %g3))
+ subcc %i4, 0x8, %i4
+ srlx %g3, %i3, %i5
+ or %i5, %g2, %i5
+ EX_ST(STORE(stx, %i5, %o0))
add %o0, 0x8, %o0
bgu,pt %icc, 1b
sllx %g3, %g1, %g2
srl %g1, 3, %g1
- andcc %o2, 0x7, %o2
+ andcc %i2, 0x7, %i2
be,pn %icc, 85f
- add %o1, %g1, %o1
+ add %i1, %g1, %i1
ba,pt %xcc, 90f
- sub %o0, %o1, %o3
+ sub %o0, %i1, %i3
.align 64
80: /* 0 < len <= 16 */
- andcc %o3, 0x3, %g0
+ andcc %i3, 0x3, %g0
bne,pn %XCC, 90f
- sub %o0, %o1, %o3
+ sub %o0, %i1, %i3
1:
- subcc %o2, 4, %o2
- EX_LD(LOAD(lduw, %o1, %g1))
- EX_ST(STORE(stw, %g1, %o1 + %o3))
+ subcc %i2, 4, %i2
+ EX_LD(LOAD(lduw, %i1, %g1))
+ EX_ST(STORE(stw, %g1, %i1 + %i3))
bgu,pt %XCC, 1b
- add %o1, 4, %o1
+ add %i1, 4, %i1
-85: retl
- mov EX_RETVAL(GLOBAL_SPARE), %o0
+85: ret
+ restore EX_RETVAL(%i0), %g0, %o0
.align 32
90:
- subcc %o2, 1, %o2
- EX_LD(LOAD(ldub, %o1, %g1))
- EX_ST(STORE(stb, %g1, %o1 + %o3))
+ subcc %i2, 1, %i2
+ EX_LD(LOAD(ldub, %i1, %g1))
+ EX_ST(STORE(stb, %g1, %i1 + %i3))
bgu,pt %XCC, 90b
- add %o1, 1, %o1
- retl
- mov EX_RETVAL(GLOBAL_SPARE), %o0
+ add %i1, 1, %i1
+ ret
+ restore EX_RETVAL(%i0), %g0, %o0
.size FUNC_NAME, .-FUNC_NAME
-#define VDSO_TEXT_OFFSET 0x500
+#define VDSO_TEXT_OFFSET 0x600
config ACPI_VIDEO
tristate "Video"
depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL
+ depends on INPUT
help
This driver implement the ACPI Extensions For Display Adapters
for integrated graphics devices on motherboard, as specified in
"While executing method _SST"));
}
- /*
- * 1) Disable/Clear all GPEs
- */
+ /* Disable/Clear all GPEs */
+
status = acpi_hw_disable_all_gpes();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
static void acpi_hibernation_finish(void)
{
+ /*
+ * If ACPI is not enabled by the BIOS and the boot kernel, we need to
+ * enable it here.
+ */
+ acpi_enable();
acpi_leave_sleep_state(ACPI_STATE_S4);
acpi_disable_wakeup_device(ACPI_STATE_S4);
u32 table_count;
struct acpi_table_header *table;
acpi_physical_address address;
- acpi_physical_address rsdt_address;
+ acpi_physical_address uninitialized_var(rsdt_address);
u32 length;
u8 *table_entry;
acpi_status status;
struct acpi_thermal_trips trips;
struct acpi_handle_list devices;
struct timer_list timer;
+ struct mutex lock;
};
static const struct file_operations acpi_thermal_state_fops = {
int result = 0;
struct acpi_thermal *tz = data;
unsigned long sleep_time = 0;
+ unsigned long timeout_jiffies = 0;
int i = 0;
struct acpi_thermal_state state;
return;
}
+ /* Check if someone else is already running */
+ if (!mutex_trylock(&tz->lock))
+ return;
+
state = tz->state;
result = acpi_thermal_get_temperature(tz);
if (result)
- return;
+ goto unlock;
memset(&tz->state, 0, sizeof(tz->state));
* a thermal event occurs). Note that _TSP and _TZD values are
* given in 1/10th seconds (we must covert to milliseconds).
*/
- if (tz->state.passive)
+ if (tz->state.passive) {
sleep_time = tz->trips.passive.tsp * 100;
- else if (tz->polling_frequency > 0)
+ timeout_jiffies = jiffies + (HZ * sleep_time) / 1000;
+ } else if (tz->polling_frequency > 0) {
sleep_time = tz->polling_frequency * 100;
+ timeout_jiffies = round_jiffies(jiffies + (HZ * sleep_time) / 1000);
+ }
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
tz->name, tz->temperature, sleep_time));
del_timer(&(tz->timer));
} else {
if (timer_pending(&(tz->timer)))
- mod_timer(&(tz->timer),
- jiffies + (HZ * sleep_time) / 1000);
+ mod_timer(&(tz->timer), timeout_jiffies);
else {
tz->timer.data = (unsigned long)tz;
tz->timer.function = acpi_thermal_run;
- tz->timer.expires = jiffies + (HZ * sleep_time) / 1000;
+ tz->timer.expires = timeout_jiffies;
add_timer(&(tz->timer));
}
}
-
- return;
+ unlock:
+ mutex_unlock(&tz->lock);
}
/* --------------------------------------------------------------------------
strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
acpi_driver_data(device) = tz;
-
+ mutex_init(&tz->lock);
result = acpi_thermal_get_info(tz);
if (result)
goto end;
}
acpi_thermal_remove_fs(device);
-
+ mutex_destroy(&tz->lock);
kfree(tz);
return 0;
}
static int
acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
{
- int status;
+ int status = AE_OK;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
arg0.integer.value = level;
- status = acpi_evaluate_object(device->dev->handle, "_BCM", &args, NULL);
+ if (device->cap._BCM)
+ status = acpi_evaluate_object(device->dev->handle, "_BCM",
+ &args, NULL);
+ device->brightness->curr = level;
return status;
}
acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
unsigned long *level)
{
- int status;
-
- status = acpi_evaluate_integer(device->dev->handle, "_BQC", NULL, level);
-
- return status;
+ if (device->cap._BQC)
+ return acpi_evaluate_integer(device->dev->handle, "_BQC", NULL,
+ level);
+ *level = device->brightness->curr;
+ return AE_OK;
}
static int
acpi_video_get_next_level(struct acpi_video_device *device,
u32 level_current, u32 event)
{
- int min, max, min_above, max_below, i, l;
+ int min, max, min_above, max_below, i, l, delta = 255;
max = max_below = 0;
min = min_above = 255;
+ /* Find closest level to level_current */
+ for (i = 0; i < device->brightness->count; i++) {
+ l = device->brightness->levels[i];
+ if (abs(l - level_current) < abs(delta)) {
+ delta = l - level_current;
+ if (!delta)
+ break;
+ }
+ }
+ /* Ajust level_current to closest available level */
+ level_current += delta;
for (i = 0; i < device->brightness->count; i++) {
l = device->brightness->levels[i];
if (l < min)
{
static struct dmi_system_id sysids[] = {
{
+ .ident = "TECRA M3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"),
+ },
+ },
+ {
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
+ if (!data->cs0 || !data->cs1)
+ return -ENOMEM;
+
irq = platform_get_irq(pdev, 0);
if (irq)
set_irq_type(irq, IRQT_RISING);
return -ENOMEM;
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
- printk("%02X:%02X ", i, readb(barp + i));
+ printk("%02X:%02X ", i, ioread8(barp + i));
printk("\n");
- devices = readl(barp + 0x0C);
+ devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
enum {
- MV_DMA_BOUNDARY = 0xffffffffU,
+ /* DMA boundary 0xffff is required by the s/g splitting
+ * we need on /length/ in mv_fill-sg().
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
/* mask of register bits containing lower 32 bits
* of EDMA request queue DMA address
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_MAX_SG_CT,
+ .sg_tablesize = MV_MAX_SG_CT / 2,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = 1,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_MAX_SG_CT,
+ .sg_tablesize = MV_MAX_SG_CT / 2,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = 1,
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
- mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
- mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff);
+ while (sg_len) {
+ u32 offset = addr & 0xffff;
+ u32 len = sg_len;
+
+ if ((offset + sg_len > 0x10000))
+ len = 0x10000 - offset;
+
+ mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+ mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ mv_sg->flags_size = cpu_to_le32(len);
- if (ata_sg_is_last(sg, qc))
- mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ sg_len -= len;
+ addr += len;
+
+ if (!sg_len && ata_sg_is_last(sg, qc))
+ mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+
+ mv_sg++;
+ n_sg++;
+ }
- mv_sg++;
- n_sg++;
}
return n_sg;
static struct kobject * get_device_parent(struct device *dev,
struct device *parent)
{
- /* Set the parent to the class, not the parent device */
- /* this keeps sysfs from having a symlink to make old udevs happy */
- if (dev->class)
+ /*
+ * Set the parent to the class, not the parent device
+ * for topmost devices in class hierarchy.
+ * This keeps sysfs from having a symlink to make old
+ * udevs happy
+ */
+ if (dev->class && (!parent || parent->class != dev->class))
return &dev->class->subsys.kobj;
else if (parent)
return &parent->kobj;
ifdef GENERATE_KEYMAP
-$(obj)/defkeymap.c $(obj)/%.c: $(src)/%.map
+$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
loadkeys --mktable $< > $@.tmp
sed -e 's/^static *//' $@.tmp > $@
rm $@.tmp
break;
}
} else {
- /* G33's GTT stolen memory is separate from gfx data
- * stolen memory.
- */
- if (IS_G33)
- size = 0;
switch (gmch_ctrl & I855_GMCH_GMS_MASK) {
case I855_GMCH_GMS_STOLEN_1M:
gtt_entries = MB(1) - KB(size);
#define I915REG_INT_MASK_R 0x020a8
#define I915REG_INT_ENABLE_R 0x020a0
+#define I915REG_PIPEASTAT 0x70024
+#define I915REG_PIPEBSTAT 0x71024
+
+#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
+#define I915_VBLANK_CLEAR (1UL<<1)
+
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
#define SR01 1
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u16 temp;
+ u32 pipea_stats, pipeb_stats;
+
+ pipea_stats = I915_READ(I915REG_PIPEASTAT);
+ pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
temp = I915_READ16(I915REG_INT_IDENTITY_R);
return IRQ_NONE;
I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
+ (void) I915_READ16(I915REG_INT_IDENTITY_R);
+ DRM_READMEMORYBARRIER();
dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
if (dev_priv->swaps_pending > 0)
drm_locked_tasklet(dev, i915_vblank_tasklet);
+ I915_WRITE(I915REG_PIPEASTAT,
+ pipea_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
+ I915_WRITE(I915REG_PIPEBSTAT,
+ pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
}
return IRQ_HANDLED;
* As close as possible to RFC 793, which
* suggests using a 250 kHz clock.
* Further reading shows this assumes 2 Mb/s networks.
- * For 10 Gb/s Ethernet, a 1 GHz clock is appropriate.
- * That's funny, Linux has one built in! Use it!
- * (Networks are faster now - should this be increased?)
+ * For 10 Mb/s Ethernet, a 1 MHz clock is appropriate.
+ * For 10 Gb/s Ethernet, a 1 GHz clock should be ok, but
+ * we also need to limit the resolution so that the u32 seq
+ * overlaps less than one time per MSL (2 minutes).
+ * Choosing a clock of 64 ns period is OK. (period of 274 s)
*/
- seq += ktime_get_real().tv64;
+ seq += ktime_get_real().tv64 >> 6;
#if 0
printk("init_seq(%lx, %lx, %d, %d) = %d\n",
saddr, daddr, sport, dport, seq);
/*
* Switching-from response
*/
+ acquire_console_sem();
if (vc->vt_newvt >= 0) {
if (arg == 0)
/*
* complete the switch.
*/
int newvt;
- acquire_console_sem();
newvt = vc->vt_newvt;
vc->vt_newvt = -1;
i = vc_allocate(newvt);
* other console switches..
*/
complete_change_console(vc_cons[newvt].d);
- release_console_sem();
}
}
/*
* If it's just an ACK, ignore it
*/
- if (arg != VT_ACKACQ)
+ if (arg != VT_ACKACQ) {
+ release_console_sem();
return -EINVAL;
+ }
}
+ release_console_sem();
return 0;
/*
* Sleeps until a vt is activated, or the task is interrupted. Returns
- * 0 if activation, -EINTR if interrupted.
+ * 0 if activation, -EINTR if interrupted by a signal handler.
*/
int vt_waitactive(int vt)
{
break;
}
release_console_sem();
- retval = -EINTR;
+ retval = -ERESTARTNOHAND;
if (signal_pending(current))
break;
schedule();
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
- * is awry
+ * is awry.
+ *
+ * We need to set vt_newvt *before* sending the signal or we
+ * have a race.
*/
+ vc->vt_newvt = new_vc->vc_num;
if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
/*
* It worked. Mark the vt to switch to and
* return. The process needs to send us a
* VT_RELDISP ioctl to complete the switch.
*/
- vc->vt_newvt = new_vc->vc_num;
return;
}
This is the "Juju" FireWire stack, a new alternative implementation
designed for robustness and simplicity. You can build either this
stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
- or both.
+ or both. Please read http://wiki.linux1394.org/JujuMigration before
+ you enable the new stack.
To compile this driver as a module, say M here: the module will be
called firewire-core. It functionally replaces ieee1394, raw1394,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {},
};
static struct pci_driver pmac_ide_pci_driver = {
config JOYSTICK_XPAD_LEDS
bool "LED Support for Xbox360 controller 'BigX' LED"
- depends on LEDS_CLASS && JOYSTICK_XPAD
+ depends on JOYSTICK_XPAD && (LEDS_CLASS=y || LEDS_CLASS=JOYSTICK_XPAD)
---help---
This option enables support for the LED which surrounds the Big X on
XBox 360 controller.
if (count > dev->drv[drvidx]->stavail)
count = dev->drv[drvidx]->stavail;
len = dev->drv[drvidx]->interface->readstat(buf, count,
- drvidx, isdn_minor2chan(minor));
+ drvidx, isdn_minor2chan(minor - ISDN_MINOR_CTRL));
if (len < 0) {
retval = len;
goto out;
*/
if (dev->drv[drvidx]->interface->writecmd)
retval = dev->drv[drvidx]->interface->
- writecmd(buf, count, drvidx, isdn_minor2chan(minor));
+ writecmd(buf, count, drvidx,
+ isdn_minor2chan(minor - ISDN_MINOR_CTRL));
else
retval = count;
goto out;
ivtv_yuv_close(itv);
}
if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_YUV)
- itv->output_mode = OUT_NONE;
+ itv->output_mode = OUT_NONE;
+ else if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_UDMA_YUV)
+ itv->output_mode = OUT_NONE;
else if (s->type == IVTV_DEC_STREAM_TYPE_MPG && itv->output_mode == OUT_MPG)
- itv->output_mode = OUT_NONE;
+ itv->output_mode = OUT_NONE;
itv->speed = 0;
clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags);
If you have an ACPI-compatible ASUS laptop, say Y or M here.
+config FUJITSU_LAPTOP
+ tristate "Fujitsu Laptop Extras"
+ depends on X86
+ depends on ACPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ ---help---
+ This is a driver for laptops built by Fujitsu:
+
+ * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
+ * Possibly other Fujitsu laptop models
+
+ It adds support for LCD brightness control.
+
+ If you have a Fujitsu laptop, say Y or M here.
+
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on X86
tristate "Sony Laptop Extras"
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
+ depends on INPUT
---help---
This mini-driver drives the SNC and SPIC devices present in the ACPI
BIOS of the Sony Vaio laptops.
select BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
+ depends on INPUT
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
+obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
--- /dev/null
+/*-*-linux-c-*-*/
+
+/*
+ Copyright (C) 2007 Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+ Based on earlier work:
+ Copyright (C) 2003 Shane Spencer <shane@bogomip.com>
+ Adrian Yee <brewt-fujitsu@brewt.org>
+
+ Templated from msi-laptop.c which is copyright by its respective authors.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+ */
+
+/*
+ * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional
+ * features made available on a range of Fujitsu laptops including the
+ * P2xxx/P5xxx/S6xxx/S7xxx series.
+ *
+ * This driver exports a few files in /sys/devices/platform/fujitsu-laptop/;
+ * others may be added at a later date.
+ *
+ * lcd_level - Screen brightness: contains a single integer in the
+ * range 0..7. (rw)
+ *
+ * In addition to these platform device attributes the driver
+ * registers itself in the Linux backlight control subsystem and is
+ * available to userspace under /sys/class/backlight/fujitsu-laptop/.
+ *
+ * This driver has been tested on a Fujitsu Lifebook S7020. It should
+ * work on most P-series and S-series Lifebooks, but YMMV.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/autoconf.h>
+
+#define FUJITSU_DRIVER_VERSION "0.3"
+
+#define FUJITSU_LCD_N_LEVELS 8
+
+#define ACPI_FUJITSU_CLASS "fujitsu"
+#define ACPI_FUJITSU_HID "FUJ02B1"
+#define ACPI_FUJITSU_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI extras driver"
+#define ACPI_FUJITSU_DEVICE_NAME "Fujitsu FUJ02B1"
+
+struct fujitsu_t {
+ acpi_handle acpi_handle;
+ struct backlight_device *bl_device;
+ struct platform_device *pf_device;
+
+ unsigned long fuj02b1_state;
+ unsigned int brightness_changed;
+ unsigned int brightness_level;
+};
+
+static struct fujitsu_t *fujitsu;
+
+/* Hardware access */
+
+static int set_lcd_level(int level)
+{
+ acpi_status status = AE_OK;
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list arg_list = { 1, &arg0 };
+ acpi_handle handle = NULL;
+
+ if (level < 0 || level >= FUJITSU_LCD_N_LEVELS)
+ return -EINVAL;
+
+ if (!fujitsu)
+ return -EINVAL;
+
+ status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle);
+ if (ACPI_FAILURE(status)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "SBLL not present\n"));
+ return -ENODEV;
+ }
+
+ arg0.integer.value = level;
+
+ status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int get_lcd_level(void)
+{
+ unsigned long state = 0;
+ acpi_status status = AE_OK;
+
+ // Get the Brightness
+ status =
+ acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state);
+ if (status < 0)
+ return status;
+
+ fujitsu->fuj02b1_state = state;
+ fujitsu->brightness_level = state & 0x0fffffff;
+
+ if (state & 0x80000000)
+ fujitsu->brightness_changed = 1;
+ else
+ fujitsu->brightness_changed = 0;
+
+ if (status < 0)
+ return status;
+
+ return fujitsu->brightness_level;
+}
+
+/* Backlight device stuff */
+
+static int bl_get_brightness(struct backlight_device *b)
+{
+ return get_lcd_level();
+}
+
+static int bl_update_status(struct backlight_device *b)
+{
+ return set_lcd_level(b->props.brightness);
+}
+
+static struct backlight_ops fujitsubl_ops = {
+ .get_brightness = bl_get_brightness,
+ .update_status = bl_update_status,
+};
+
+/* Platform device */
+
+static ssize_t show_lcd_level(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+
+ int ret;
+
+ ret = get_lcd_level();
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%i\n", ret);
+}
+
+static ssize_t store_lcd_level(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+
+ int level, ret;
+
+ if (sscanf(buf, "%i", &level) != 1
+ || (level < 0 || level >= FUJITSU_LCD_N_LEVELS))
+ return -EINVAL;
+
+ ret = set_lcd_level(level);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level);
+
+static struct attribute *fujitsupf_attributes[] = {
+ &dev_attr_lcd_level.attr,
+ NULL
+};
+
+static struct attribute_group fujitsupf_attribute_group = {
+ .attrs = fujitsupf_attributes
+};
+
+static struct platform_driver fujitsupf_driver = {
+ .driver = {
+ .name = "fujitsu-laptop",
+ .owner = THIS_MODULE,
+ }
+};
+
+/* ACPI device */
+
+int acpi_fujitsu_add(struct acpi_device *device)
+{
+ int result = 0;
+ int state = 0;
+
+ ACPI_FUNCTION_TRACE("acpi_fujitsu_add");
+
+ if (!device)
+ return -EINVAL;
+
+ fujitsu->acpi_handle = device->handle;
+ sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME);
+ sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
+ acpi_driver_data(device) = fujitsu;
+
+ result = acpi_bus_get_power(fujitsu->acpi_handle, &state);
+ if (result) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ "Error reading power state\n"));
+ goto end;
+ }
+
+ printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
+ acpi_device_name(device), acpi_device_bid(device),
+ !device->power.state ? "on" : "off");
+
+ end:
+
+ return result;
+}
+
+int acpi_fujitsu_remove(struct acpi_device *device, int type)
+{
+ ACPI_FUNCTION_TRACE("acpi_fujitsu_remove");
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+ fujitsu->acpi_handle = 0;
+
+ return 0;
+}
+
+static const struct acpi_device_id fujitsu_device_ids[] = {
+ {ACPI_FUJITSU_HID, 0},
+ {"", 0},
+};
+
+static struct acpi_driver acpi_fujitsu_driver = {
+ .name = ACPI_FUJITSU_DRIVER_NAME,
+ .class = ACPI_FUJITSU_CLASS,
+ .ids = fujitsu_device_ids,
+ .ops = {
+ .add = acpi_fujitsu_add,
+ .remove = acpi_fujitsu_remove,
+ },
+};
+
+/* Initialization */
+
+static int __init fujitsu_init(void)
+{
+ int ret, result;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ fujitsu = kmalloc(sizeof(struct fujitsu_t), GFP_KERNEL);
+ if (!fujitsu)
+ return -ENOMEM;
+ memset(fujitsu, 0, sizeof(struct fujitsu_t));
+
+ result = acpi_bus_register_driver(&acpi_fujitsu_driver);
+ if (result < 0) {
+ ret = -ENODEV;
+ goto fail_acpi;
+ }
+
+ /* Register backlight stuff */
+
+ fujitsu->bl_device =
+ backlight_device_register("fujitsu-laptop", NULL, NULL,
+ &fujitsubl_ops);
+ if (IS_ERR(fujitsu->bl_device))
+ return PTR_ERR(fujitsu->bl_device);
+
+ fujitsu->bl_device->props.max_brightness = FUJITSU_LCD_N_LEVELS - 1;
+ ret = platform_driver_register(&fujitsupf_driver);
+ if (ret)
+ goto fail_backlight;
+
+ /* Register platform stuff */
+
+ fujitsu->pf_device = platform_device_alloc("fujitsu-laptop", -1);
+ if (!fujitsu->pf_device) {
+ ret = -ENOMEM;
+ goto fail_platform_driver;
+ }
+
+ ret = platform_device_add(fujitsu->pf_device);
+ if (ret)
+ goto fail_platform_device1;
+
+ ret =
+ sysfs_create_group(&fujitsu->pf_device->dev.kobj,
+ &fujitsupf_attribute_group);
+ if (ret)
+ goto fail_platform_device2;
+
+ printk(KERN_INFO "fujitsu-laptop: driver " FUJITSU_DRIVER_VERSION
+ " successfully loaded.\n");
+
+ return 0;
+
+ fail_platform_device2:
+
+ platform_device_del(fujitsu->pf_device);
+
+ fail_platform_device1:
+
+ platform_device_put(fujitsu->pf_device);
+
+ fail_platform_driver:
+
+ platform_driver_unregister(&fujitsupf_driver);
+
+ fail_backlight:
+
+ backlight_device_unregister(fujitsu->bl_device);
+
+ fail_acpi:
+
+ kfree(fujitsu);
+
+ return ret;
+}
+
+static void __exit fujitsu_cleanup(void)
+{
+ sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
+ &fujitsupf_attribute_group);
+ platform_device_unregister(fujitsu->pf_device);
+ platform_driver_unregister(&fujitsupf_driver);
+ backlight_device_unregister(fujitsu->bl_device);
+
+ acpi_bus_unregister_driver(&acpi_fujitsu_driver);
+
+ kfree(fujitsu);
+
+ printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n");
+}
+
+module_init(fujitsu_init);
+module_exit(fujitsu_cleanup);
+
+MODULE_AUTHOR("Jonathan Woithe");
+MODULE_DESCRIPTION("Fujitsu laptop extras support");
+MODULE_VERSION(FUJITSU_DRIVER_VERSION);
+MODULE_LICENSE("GPL");
#define SONYPI_TYPE3_OFFSET 0x12
struct sony_pic_ioport {
- struct acpi_resource_io io;
+ struct acpi_resource_io io1;
+ struct acpi_resource_io io2;
struct list_head list;
};
{
u8 v1, v2;
- wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+ wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2,
ITERATIONS_LONG);
- outb(dev, spic_dev.cur_ioport->io.minimum + 4);
- v1 = inb_p(spic_dev.cur_ioport->io.minimum + 4);
- v2 = inb_p(spic_dev.cur_ioport->io.minimum);
+ outb(dev, spic_dev.cur_ioport->io1.minimum + 4);
+ v1 = inb_p(spic_dev.cur_ioport->io1.minimum + 4);
+ v2 = inb_p(spic_dev.cur_ioport->io1.minimum);
dprintk("sony_pic_call1: 0x%.4x\n", (v2 << 8) | v1);
return v2;
}
{
u8 v1;
- wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+ wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2,
ITERATIONS_LONG);
- outb(dev, spic_dev.cur_ioport->io.minimum + 4);
- wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+ outb(dev, spic_dev.cur_ioport->io1.minimum + 4);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2,
ITERATIONS_LONG);
- outb(fn, spic_dev.cur_ioport->io.minimum);
- v1 = inb_p(spic_dev.cur_ioport->io.minimum);
+ outb(fn, spic_dev.cur_ioport->io1.minimum);
+ v1 = inb_p(spic_dev.cur_ioport->io1.minimum);
dprintk("sony_pic_call2: 0x%.4x\n", v1);
return v1;
}
{
u8 v1;
- wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
- outb(dev, spic_dev.cur_ioport->io.minimum + 4);
- wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
- outb(fn, spic_dev.cur_ioport->io.minimum);
- wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
- outb(v, spic_dev.cur_ioport->io.minimum);
- v1 = inb_p(spic_dev.cur_ioport->io.minimum);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2, ITERATIONS_LONG);
+ outb(dev, spic_dev.cur_ioport->io1.minimum + 4);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2, ITERATIONS_LONG);
+ outb(fn, spic_dev.cur_ioport->io1.minimum);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2, ITERATIONS_LONG);
+ outb(v, spic_dev.cur_ioport->io1.minimum);
+ v1 = inb_p(spic_dev.cur_ioport->io1.minimum);
dprintk("sony_pic_call3: 0x%.4x\n", v1);
return v1;
}
switch (resource->type) {
case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+ {
+ /* start IO enumeration */
+ struct sony_pic_ioport *ioport = kzalloc(sizeof(*ioport), GFP_KERNEL);
+ if (!ioport)
+ return AE_ERROR;
+
+ list_add(&ioport->list, &dev->ioports);
+ return AE_OK;
+ }
+
case ACPI_RESOURCE_TYPE_END_DEPENDENT:
+ /* end IO enumeration */
return AE_OK;
case ACPI_RESOURCE_TYPE_IRQ:
if (!interrupt)
return AE_ERROR;
- list_add_tail(&interrupt->list, &dev->interrupts);
+ list_add(&interrupt->list, &dev->interrupts);
interrupt->irq.triggering = p->triggering;
interrupt->irq.polarity = p->polarity;
interrupt->irq.sharable = p->sharable;
case ACPI_RESOURCE_TYPE_IO:
{
struct acpi_resource_io *io = &resource->data.io;
- struct sony_pic_ioport *ioport = NULL;
+ struct sony_pic_ioport *ioport =
+ list_first_entry(&dev->ioports, struct sony_pic_ioport, list);
if (!io) {
dprintk("Blank IO resource\n");
return AE_OK;
}
- ioport = kzalloc(sizeof(*ioport), GFP_KERNEL);
- if (!ioport)
+ if (!ioport->io1.minimum) {
+ memcpy(&ioport->io1, io, sizeof(*io));
+ dprintk("IO1 at 0x%.4x (0x%.2x)\n", ioport->io1.minimum,
+ ioport->io1.address_length);
+ }
+ else if (!ioport->io2.minimum) {
+ memcpy(&ioport->io2, io, sizeof(*io));
+ dprintk("IO2 at 0x%.4x (0x%.2x)\n", ioport->io2.minimum,
+ ioport->io2.address_length);
+ }
+ else {
+ printk(KERN_ERR DRV_PFX "Unknown SPIC Type, more than 2 IO Ports\n");
return AE_ERROR;
-
- list_add_tail(&ioport->list, &dev->ioports);
- memcpy(&ioport->io, io, sizeof(*io));
+ }
return AE_OK;
}
default:
{
acpi_status status;
int result = 0;
+ /* Type 1 resource layout is:
+ * IO
+ * IO
+ * IRQNoFlags
+ * End
+ *
+ * Type 2 and 3 resource layout is:
+ * IO
+ * IRQNoFlags
+ * End
+ */
struct {
- struct acpi_resource io_res;
- struct acpi_resource irq_res;
- struct acpi_resource end;
+ struct acpi_resource res1;
+ struct acpi_resource res2;
+ struct acpi_resource res3;
+ struct acpi_resource res4;
} *resource;
struct acpi_buffer buffer = { 0, NULL };
buffer.length = sizeof(*resource) + 1;
buffer.pointer = resource;
- /* setup io resource */
- resource->io_res.type = ACPI_RESOURCE_TYPE_IO;
- resource->io_res.length = sizeof(struct acpi_resource);
- memcpy(&resource->io_res.data.io, &ioport->io,
- sizeof(struct acpi_resource_io));
+ /* setup Type 1 resources */
+ if (spic_dev.model == SONYPI_DEVICE_TYPE1) {
- /* setup irq resource */
- resource->irq_res.type = ACPI_RESOURCE_TYPE_IRQ;
- resource->irq_res.length = sizeof(struct acpi_resource);
- memcpy(&resource->irq_res.data.irq, &irq->irq,
- sizeof(struct acpi_resource_irq));
- /* we requested a shared irq */
- resource->irq_res.data.irq.sharable = ACPI_SHARED;
+ /* setup io resources */
+ resource->res1.type = ACPI_RESOURCE_TYPE_IO;
+ resource->res1.length = sizeof(struct acpi_resource);
+ memcpy(&resource->res1.data.io, &ioport->io1,
+ sizeof(struct acpi_resource_io));
- resource->end.type = ACPI_RESOURCE_TYPE_END_TAG;
+ resource->res2.type = ACPI_RESOURCE_TYPE_IO;
+ resource->res2.length = sizeof(struct acpi_resource);
+ memcpy(&resource->res2.data.io, &ioport->io2,
+ sizeof(struct acpi_resource_io));
+
+ /* setup irq resource */
+ resource->res3.type = ACPI_RESOURCE_TYPE_IRQ;
+ resource->res3.length = sizeof(struct acpi_resource);
+ memcpy(&resource->res3.data.irq, &irq->irq,
+ sizeof(struct acpi_resource_irq));
+ /* we requested a shared irq */
+ resource->res3.data.irq.sharable = ACPI_SHARED;
+
+ resource->res4.type = ACPI_RESOURCE_TYPE_END_TAG;
+
+ }
+ /* setup Type 2/3 resources */
+ else {
+ /* setup io resource */
+ resource->res1.type = ACPI_RESOURCE_TYPE_IO;
+ resource->res1.length = sizeof(struct acpi_resource);
+ memcpy(&resource->res1.data.io, &ioport->io1,
+ sizeof(struct acpi_resource_io));
+
+ /* setup irq resource */
+ resource->res2.type = ACPI_RESOURCE_TYPE_IRQ;
+ resource->res2.length = sizeof(struct acpi_resource);
+ memcpy(&resource->res2.data.irq, &irq->irq,
+ sizeof(struct acpi_resource_irq));
+ /* we requested a shared irq */
+ resource->res2.data.irq.sharable = ACPI_SHARED;
+
+ resource->res3.type = ACPI_RESOURCE_TYPE_END_TAG;
+ }
/* Attempt to set the resource */
dprintk("Evaluating _SRS\n");
/* check for total failure */
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR DRV_PFX "Error evaluating _SRS");
+ printk(KERN_ERR DRV_PFX "Error evaluating _SRS\n");
result = -ENODEV;
goto end;
}
struct sony_pic_dev *dev = (struct sony_pic_dev *) dev_id;
- ev = inb_p(dev->cur_ioport->io.minimum);
- data_mask = inb_p(dev->cur_ioport->io.minimum + dev->evport_offset);
+ ev = inb_p(dev->cur_ioport->io1.minimum);
+ if (dev->cur_ioport->io2.minimum)
+ data_mask = inb_p(dev->cur_ioport->io2.minimum);
+ else
+ data_mask = inb_p(dev->cur_ioport->io1.minimum + dev->evport_offset);
dprintk("event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
- ev, data_mask, dev->cur_ioport->io.minimum, dev->evport_offset);
+ ev, data_mask, dev->cur_ioport->io1.minimum, dev->evport_offset);
if (ev == 0x00 || ev == 0xff)
return IRQ_HANDLED;
}
free_irq(spic_dev.cur_irq->irq.interrupts[0], &spic_dev);
- release_region(spic_dev.cur_ioport->io.minimum,
- spic_dev.cur_ioport->io.address_length);
+ release_region(spic_dev.cur_ioport->io1.minimum,
+ spic_dev.cur_ioport->io1.address_length);
+ if (spic_dev.cur_ioport->io2.minimum)
+ release_region(spic_dev.cur_ioport->io2.minimum,
+ spic_dev.cur_ioport->io2.address_length);
sonypi_compat_exit();
goto err_remove_input;
/* request io port */
- list_for_each_entry(io, &spic_dev.ioports, list) {
- if (request_region(io->io.minimum, io->io.address_length,
+ list_for_each_entry_reverse(io, &spic_dev.ioports, list) {
+ if (request_region(io->io1.minimum, io->io1.address_length,
"Sony Programable I/O Device")) {
- dprintk("I/O port: 0x%.4x (0x%.4x) + 0x%.2x\n",
- io->io.minimum, io->io.maximum,
- io->io.address_length);
- spic_dev.cur_ioport = io;
- break;
+ dprintk("I/O port1: 0x%.4x (0x%.4x) + 0x%.2x\n",
+ io->io1.minimum, io->io1.maximum,
+ io->io1.address_length);
+ /* Type 1 have 2 ioports */
+ if (io->io2.minimum) {
+ if (request_region(io->io2.minimum,
+ io->io2.address_length,
+ "Sony Programable I/O Device")) {
+ dprintk("I/O port2: 0x%.4x (0x%.4x) + 0x%.2x\n",
+ io->io2.minimum, io->io2.maximum,
+ io->io2.address_length);
+ spic_dev.cur_ioport = io;
+ break;
+ }
+ else {
+ dprintk("Unable to get I/O port2: "
+ "0x%.4x (0x%.4x) + 0x%.2x\n",
+ io->io2.minimum, io->io2.maximum,
+ io->io2.address_length);
+ release_region(io->io1.minimum,
+ io->io1.address_length);
+ }
+ }
+ else {
+ spic_dev.cur_ioport = io;
+ break;
+ }
}
}
if (!spic_dev.cur_ioport) {
}
/* request IRQ */
- list_for_each_entry(irq, &spic_dev.interrupts, list) {
+ list_for_each_entry_reverse(irq, &spic_dev.interrupts, list) {
if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
IRQF_SHARED, "sony-laptop", &spic_dev)) {
dprintk("IRQ: %d - triggering: %d - "
free_irq(spic_dev.cur_irq->irq.interrupts[0], &spic_dev);
err_release_region:
- release_region(spic_dev.cur_ioport->io.minimum,
- spic_dev.cur_ioport->io.address_length);
+ release_region(spic_dev.cur_ioport->io1.minimum,
+ spic_dev.cur_ioport->io1.address_length);
+ if (spic_dev.cur_ioport->io2.minimum)
+ release_region(spic_dev.cur_ioport->io2.minimum,
+ spic_dev.cur_ioport->io2.address_length);
err_remove_compat:
sonypi_compat_exit();
*/
#define IBM_VERSION "0.16"
-#define TPACPI_SYSFS_VERSION 0x010000
+#define TPACPI_SYSFS_VERSION 0x020000
/*
* Changelog:
#define __unused __attribute__ ((unused))
+static enum {
+ TPACPI_LIFE_INIT = 0,
+ TPACPI_LIFE_RUNNING,
+ TPACPI_LIFE_EXITING,
+} tpacpi_lifecycle;
+
/****************************************************************************
****************************************************************************
*
{
struct ibm_struct *ibm = data;
+ if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING)
+ return;
+
if (!ibm || !ibm->acpi || !ibm->acpi->notify)
return;
****************************************************************************/
static struct platform_device *tpacpi_pdev;
+static struct platform_device *tpacpi_sensors_pdev;
static struct class_device *tpacpi_hwmon;
static struct input_dev *tpacpi_inputdev;
+static struct mutex tpacpi_inputdev_send_mutex;
static int tpacpi_resume_handler(struct platform_device *pdev)
.resume = tpacpi_resume_handler,
};
+static struct platform_driver tpacpi_hwmon_pdriver = {
+ .driver = {
+ .name = IBM_HWMON_DRVR_NAME,
+ .owner = THIS_MODULE,
+ },
+};
/*************************************************************************
* thinkpad-acpi driver attributes
{
char *endp;
+ while (*buf && isspace(*buf))
+ buf++;
*value = simple_strtoul(buf, &endp, 0);
while (*endp && isspace(*endp))
endp++;
int res, i;
int status;
+ int hkeyv;
vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
return res;
/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- A30, R30, R31, T20-22, X20-21, X22-24 */
- tp_features.hotkey_mask =
- acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
+ A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
+ for HKEY interface version 0x100 */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) != 1) {
+ printk(IBM_ERR "unknown version of the "
+ "HKEY interface: 0x%x\n", hkeyv);
+ printk(IBM_ERR "please report this to %s\n",
+ IBM_MAIL);
+ } else {
+ /*
+ * MHKV 0x100 in A31, R40, R40e,
+ * T4x, X31, and later
+ * */
+ tp_features.hotkey_mask = 1;
+ }
+ }
vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
str_supported(tp_features.hotkey_mask));
if (tp_features.hotkey_mask) {
- /* MHKA available in A31, R40, R40e, T4x, X31, and later */
if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
- "MHKA", "qd"))
+ "MHKA", "qd")) {
+ printk(IBM_ERR
+ "missing MHKA handler, "
+ "please report this to %s\n",
+ IBM_MAIL);
hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */
+ }
}
res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask);
unsigned int keycode)
{
if (keycode != KEY_RESERVED) {
+ mutex_lock(&tpacpi_inputdev_send_mutex);
+
input_report_key(tpacpi_inputdev, keycode, 1);
if (keycode == KEY_UNKNOWN)
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
scancode);
input_sync(tpacpi_inputdev);
+
+ mutex_unlock(&tpacpi_inputdev_send_mutex);
}
}
{
int wlsw;
- if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw))
+ mutex_lock(&tpacpi_inputdev_send_mutex);
+
+ if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
input_report_switch(tpacpi_inputdev,
SW_RADIO, !!wlsw);
+ input_sync(tpacpi_inputdev);
+ }
+
+ mutex_unlock(&tpacpi_inputdev_send_mutex);
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
{
u32 hkey;
unsigned int keycode, scancode;
- int send_acpi_ev = 0;
+ int send_acpi_ev;
+ int ignore_acpi_ev;
+
+ if (event != 0x80) {
+ printk(IBM_ERR "unknown HKEY notification event %d\n", event);
+ /* forward it to userspace, maybe it knows how to handle it */
+ acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
+ ibm->acpi->device->dev.bus_id,
+ event, 0);
+ return;
+ }
+
+ while (1) {
+ if (!acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
+ printk(IBM_ERR "failed to retrieve HKEY event\n");
+ return;
+ }
+
+ if (hkey == 0) {
+ /* queue empty */
+ return;
+ }
+
+ send_acpi_ev = 0;
+ ignore_acpi_ev = 0;
- if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
switch (hkey >> 12) {
case 1:
/* 0x1000-0x1FFF: key presses */
* eat up known LID events */
if (hkey != 0x5001 && hkey != 0x5002) {
printk(IBM_ERR
- "unknown LID-related hotkey event: 0x%04x\n",
- hkey);
+ "unknown LID-related HKEY event: 0x%04x\n",
+ hkey);
send_acpi_ev = 1;
+ } else {
+ ignore_acpi_ev = 1;
}
break;
case 7:
printk(IBM_NOTICE "unhandled HKEY event 0x%04x\n", hkey);
send_acpi_ev = 1;
}
- } else {
- printk(IBM_ERR "unknown hotkey notification event %d\n", event);
- hkey = 0;
- send_acpi_ev = 1;
- }
- /* Legacy events */
- if (send_acpi_ev || hotkey_report_mode < 2)
- acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey);
+ /* Legacy events */
+ if (!ignore_acpi_ev && (send_acpi_ev || hotkey_report_mode < 2)) {
+ acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey);
+ }
- /* netlink events */
- if (send_acpi_ev) {
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- ibm->acpi->device->dev.bus_id,
- event, hkey);
+ /* netlink events */
+ if (!ignore_acpi_ev && send_acpi_ev) {
+ acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
+ ibm->acpi->device->dev.bus_id,
+ event, hkey);
+ }
}
}
switch(thermal_read_mode) {
case TPACPI_THERMAL_TPEC_16:
- res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ res = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input16_group);
if (res)
return res;
case TPACPI_THERMAL_TPEC_8:
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
- res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ res = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input8_group);
if (res)
return res;
{
switch(thermal_read_mode) {
case TPACPI_THERMAL_TPEC_16:
- sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input16_group);
break;
case TPACPI_THERMAL_TPEC_8:
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
- sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
&thermal_temp_input16_group);
break;
case TPACPI_THERMAL_NONE:
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
-/* sysfs fan fan_watchdog (driver) ------------------------------------- */
+/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
{
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
- rc = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (!(rc < 0))
- rc = driver_create_file(&tpacpi_pdriver.driver,
+ rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
&driver_attr_fan_watchdog);
if (rc < 0)
return rc;
vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n");
/* FIXME: can we really do this unconditionally? */
- sysfs_remove_group(&tpacpi_pdev->dev.kobj, &fan_attr_group);
- driver_remove_file(&tpacpi_pdriver.driver, &driver_attr_fan_watchdog);
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group);
+ driver_remove_file(&tpacpi_hwmon_pdriver.driver, &driver_attr_fan_watchdog);
cancel_delayed_work(&fan_watchdog_task);
flush_scheduled_work();
{
int rc;
+ if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING)
+ return;
+
printk(IBM_NOTICE "fan watchdog: enabling fan\n");
rc = fan_set_enable();
if (rc < 0) {
if (fan_watchdog_active)
cancel_delayed_work(&fan_watchdog_task);
- if (fan_watchdog_maxinterval > 0) {
+ if (fan_watchdog_maxinterval > 0 &&
+ tpacpi_lifecycle != TPACPI_LIFE_EXITING) {
fan_watchdog_active = 1;
if (!schedule_delayed_work(&fan_watchdog_task,
msecs_to_jiffies(fan_watchdog_maxinterval
****************************************************************************
****************************************************************************/
+/* sysfs name ---------------------------------------------------------- */
+static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", IBM_NAME);
+}
+
+static struct device_attribute dev_attr_thinkpad_acpi_pdev_name =
+ __ATTR(name, S_IRUGO, thinkpad_acpi_pdev_name_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
/* /proc support */
static struct proc_dir_entry *proc_dir;
{
int ret, i;
+ tpacpi_lifecycle = TPACPI_LIFE_INIT;
+
/* Parameter checking */
if (hotkey_report_mode > 2)
return -EINVAL;
ret = platform_driver_register(&tpacpi_pdriver);
if (ret) {
- printk(IBM_ERR "unable to register platform driver\n");
+ printk(IBM_ERR "unable to register main platform driver\n");
thinkpad_acpi_module_exit();
return ret;
}
tp_features.platform_drv_registered = 1;
+ ret = platform_driver_register(&tpacpi_hwmon_pdriver);
+ if (ret) {
+ printk(IBM_ERR "unable to register hwmon platform driver\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ tp_features.sensors_pdrv_registered = 1;
+
ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver);
+ if (!ret) {
+ tp_features.platform_drv_attrs_registered = 1;
+ ret = tpacpi_create_driver_attributes(&tpacpi_hwmon_pdriver.driver);
+ }
if (ret) {
printk(IBM_ERR "unable to create sysfs driver attributes\n");
thinkpad_acpi_module_exit();
return ret;
}
- tp_features.platform_drv_attrs_registered = 1;
+ tp_features.sensors_pdrv_attrs_registered = 1;
/* Device initialization */
thinkpad_acpi_module_exit();
return ret;
}
- tpacpi_hwmon = hwmon_device_register(&tpacpi_pdev->dev);
+ tpacpi_sensors_pdev = platform_device_register_simple(
+ IBM_HWMON_DRVR_NAME,
+ -1, NULL, 0);
+ if (IS_ERR(tpacpi_sensors_pdev)) {
+ ret = PTR_ERR(tpacpi_sensors_pdev);
+ tpacpi_sensors_pdev = NULL;
+ printk(IBM_ERR "unable to register hwmon platform device\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ ret = device_create_file(&tpacpi_sensors_pdev->dev,
+ &dev_attr_thinkpad_acpi_pdev_name);
+ if (ret) {
+ printk(IBM_ERR
+ "unable to create sysfs hwmon device attributes\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ tp_features.sensors_pdev_attrs_registered = 1;
+ tpacpi_hwmon = hwmon_device_register(&tpacpi_sensors_pdev->dev);
if (IS_ERR(tpacpi_hwmon)) {
ret = PTR_ERR(tpacpi_hwmon);
tpacpi_hwmon = NULL;
thinkpad_acpi_module_exit();
return ret;
}
+ mutex_init(&tpacpi_inputdev_send_mutex);
tpacpi_inputdev = input_allocate_device();
if (!tpacpi_inputdev) {
printk(IBM_ERR "unable to allocate input device\n");
tp_features.input_device_registered = 1;
}
+ tpacpi_lifecycle = TPACPI_LIFE_RUNNING;
return 0;
}
{
struct ibm_struct *ibm, *itmp;
+ tpacpi_lifecycle = TPACPI_LIFE_EXITING;
+
list_for_each_entry_safe_reverse(ibm, itmp,
&tpacpi_all_drivers,
all_drivers) {
if (tpacpi_hwmon)
hwmon_device_unregister(tpacpi_hwmon);
+ if (tp_features.sensors_pdev_attrs_registered)
+ device_remove_file(&tpacpi_sensors_pdev->dev,
+ &dev_attr_thinkpad_acpi_pdev_name);
+ if (tpacpi_sensors_pdev)
+ platform_device_unregister(tpacpi_sensors_pdev);
if (tpacpi_pdev)
platform_device_unregister(tpacpi_pdev);
+ if (tp_features.sensors_pdrv_attrs_registered)
+ tpacpi_remove_driver_attributes(&tpacpi_hwmon_pdriver.driver);
if (tp_features.platform_drv_attrs_registered)
tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
+ if (tp_features.sensors_pdrv_registered)
+ platform_driver_unregister(&tpacpi_hwmon_pdriver);
+
if (tp_features.platform_drv_registered)
platform_driver_unregister(&tpacpi_pdriver);
#define IBM_NAME "thinkpad"
#define IBM_DESC "ThinkPad ACPI Extras"
-#define IBM_FILE "thinkpad_acpi"
+#define IBM_FILE IBM_NAME "_acpi"
#define IBM_URL "http://ibm-acpi.sf.net/"
#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net"
#define IBM_PROC_DIR "ibm"
#define IBM_ACPI_EVENT_PREFIX "ibm"
#define IBM_DRVR_NAME IBM_FILE
+#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon"
#define IBM_LOG IBM_FILE ": "
#define IBM_ERR KERN_ERR IBM_LOG
/* Device model */
static struct platform_device *tpacpi_pdev;
+static struct platform_device *tpacpi_sensors_pdev;
static struct class_device *tpacpi_hwmon;
static struct platform_driver tpacpi_pdriver;
static struct input_dev *tpacpi_inputdev;
static struct {
#ifdef CONFIG_THINKPAD_ACPI_BAY
- u16 bay_status:1;
- u16 bay_eject:1;
- u16 bay_status2:1;
- u16 bay_eject2:1;
+ u32 bay_status:1;
+ u32 bay_eject:1;
+ u32 bay_status2:1;
+ u32 bay_eject2:1;
#endif
- u16 bluetooth:1;
- u16 hotkey:1;
- u16 hotkey_mask:1;
- u16 hotkey_wlsw:1;
- u16 light:1;
- u16 light_status:1;
- u16 wan:1;
- u16 fan_ctrl_status_undef:1;
- u16 input_device_registered:1;
- u16 platform_drv_registered:1;
- u16 platform_drv_attrs_registered:1;
+ u32 bluetooth:1;
+ u32 hotkey:1;
+ u32 hotkey_mask:1;
+ u32 hotkey_wlsw:1;
+ u32 light:1;
+ u32 light_status:1;
+ u32 wan:1;
+ u32 fan_ctrl_status_undef:1;
+ u32 input_device_registered:1;
+ u32 platform_drv_registered:1;
+ u32 platform_drv_attrs_registered:1;
+ u32 sensors_pdrv_registered:1;
+ u32 sensors_pdrv_attrs_registered:1;
+ u32 sensors_pdev_attrs_registered:1;
} tp_features;
struct thinkpad_id_data {
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
/* quad port adapters only support WoL on port A */
if (!adapter->quad_port_a) {
case E1000_DEV_ID_82571EB_SERDES_DUAL:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
hw->mac_type = e1000_82571;
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC
#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
INTEL_E1000_ETHERNET_DEVICE(0x10BC),
INTEL_E1000_ETHERNET_DEVICE(0x10C4),
INTEL_E1000_ETHERNET_DEVICE(0x10C5),
+ INTEL_E1000_ETHERNET_DEVICE(0x10D5),
INTEL_E1000_ETHERNET_DEVICE(0x10D9),
INTEL_E1000_ETHERNET_DEVICE(0x10DA),
/* required last entry */
case E1000_DEV_ID_82571EB_QUAD_COPPER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
adapter->eeprom_wol = 0;
}
/* PHY status changed */
- if (eth_int_cause_ext & ETH_INT_CAUSE_PHY) {
+ if (eth_int_cause_ext & (ETH_INT_CAUSE_PHY | ETH_INT_CAUSE_STATE)) {
struct ethtool_cmd cmd;
if (mii_link_ok(&mp->mii)) {
#endif
dev->watchdog_timeo = 2 * HZ;
- dev->tx_queue_len = mp->tx_ring_size;
dev->base_addr = 0;
dev->change_mtu = mv643xx_eth_change_mtu;
dev->do_ioctl = mv643xx_eth_do_ioctl;
#define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8)
#define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR)
#define ETH_INT_CAUSE_PHY 0x00010000
-#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY)
+#define ETH_INT_CAUSE_STATE 0x00100000
+#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \
+ ETH_INT_CAUSE_STATE)
#define ETH_INT_MASK_ALL 0x00000000
#define ETH_INT_MASK_ALL_EXT 0x00000000
qdev->rsp_consumer_index) && (work_done < work_to_do)) {
net_rsp = qdev->rsp_current;
+ rmb();
+ /*
+ * Fix 4032 chipe undocumented "feature" where bit-8 is set if the
+ * inbound completion is for a VLAN.
+ */
+ if (qdev->device_id == QL3032_DEVICE_ID)
+ net_rsp->opcode &= 0x7f;
switch (net_rsp->opcode) {
case OPCODE_OB_MAC_IOCB_FN0:
rtl_set_rx_max_size(ioaddr);
- rtl_set_rx_tx_config_registers(tp);
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ rtl_set_rx_tx_config_registers(tp);
tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
rtl_set_rx_tx_desc_registers(tp, ioaddr);
+ if ((tp->mac_version != RTL_GIGA_MAC_VER_01) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_02) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_03) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_04)) {
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ rtl_set_rx_tx_config_registers(tp);
+ }
+
RTL_W8(Cfg9346, Cfg9346_Lock);
/* Initially a 10 us delay. Turned it into a PCI commit. - FR */
/* Enable all known interrupts by setting the interrupt mask. */
RTL_W16(IntrMask, tp->intr_event);
-
- RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
}
static void rtl_hw_start_8168(struct net_device *dev)
return le;
}
+static void tx_init(struct sky2_port *sky2)
+{
+ struct sky2_tx_le *le;
+
+ sky2->tx_prod = sky2->tx_cons = 0;
+ sky2->tx_tcpsum = 0;
+ sky2->tx_last_mss = 0;
+
+ le = get_tx_le(sky2);
+ le->addr = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+ sky2->tx_addr64 = 0;
+}
+
static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
struct sky2_tx_le *le)
{
GFP_KERNEL);
if (!sky2->tx_ring)
goto err_out;
- sky2->tx_prod = sky2->tx_cons = 0;
+
+ tx_init(sky2);
sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
&sky2->rx_le_map);
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
prefetch(sky2->rx_ring + sky2->rx_next);
+ /* This chip has hardware problems that generates bogus status.
+ * So do only marginal checking and expect higher level protocols
+ * to handle crap frames.
+ */
+ if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
+ length != count)
+ goto okay;
+
if (status & GMR_FS_ANY_ERR)
goto error;
/* if length reported by DMA does not match PHY, packet was truncated */
if (length != count)
- goto len_mismatch;
+ goto len_error;
+okay:
if (length < copybreak)
skb = receive_copy(sky2, re, length);
else
return skb;
-len_mismatch:
+len_error:
/* Truncation of overlength packets
causes PHY length to not match MAC length */
++sky2->net_stats.rx_length_errors;
if (netif_msg_rx_err(sky2) && net_ratelimit())
- pr_info(PFX "%s: rx length mismatch: length %d status %#x\n",
- dev->name, length, status);
+ pr_info(PFX "%s: rx length error: status %#x length %d\n",
+ dev->name, status, length);
goto resubmit;
error:
sky2->hw = hw;
sky2->msg_enable = netif_msg_init(debug, default_msg);
- /* This chip has hardware problems that generates
- * bogus PHY receive status so by default shut up the message.
- */
- if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
- hw->chip_rev == CHIP_REV_YU_FE2_A0)
- sky2->msg_enable &= ~NETIF_MSG_RX_ERR;
-
/* Auto speed and flow control */
sky2->autoneg = AUTONEG_ENABLE;
sky2->flow_mode = FC_BOTH;
dev->features |= NETIF_F_HIGHDMA;
#ifdef SKY2_VLAN_TAG_USED
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->vlan_rx_register = sky2_vlan_rx_register;
+ /* The workaround for FE+ status conflicts with VLAN tag detection. */
+ if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_rx_register = sky2_vlan_rx_register;
+ }
#endif
/* read the mac address */
dev->net->ethtool_ops = &dm9601_ethtool_ops;
dev->net->hard_header_len += DM_TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
- dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD;
+ dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD;
dev->mii.dev = dev->net;
dev->mii.mdio_read = dm9601_mdio_read;
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
-obj-$(CONFIG_LIBERTAS_USB) += libertas/
+obj-$(CONFIG_LIBERTAS) += libertas/
rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o
obj-$(CONFIG_RTL8187) += rtl8187.o
u16 maxpower;
if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) {
- printk(PFX KERN_ERR "TX power not in dBm.\n");
+ printk(KERN_ERR PFX "TX power not in dBm.\n");
return -EOPNOTSUPP;
}
static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
{
u16 command;
- u32 bar;
u8 __iomem *csr;
u8 cmd_hi;
* re-enable them when it's ready.
*/
pci_read_config_word(dev, PCI_COMMAND, &command);
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar);
- if (!(command & PCI_COMMAND_MEMORY) || !bar)
+ if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
return;
- csr = ioremap(bar, 8);
+ /* Convert from PCI bus to resource space. */
+ csr = ioremap(pci_resource_start(dev, 0), 8);
if (!csr) {
printk(KERN_WARNING "PCI: Can't map %s e100 registers\n",
pci_name(dev));
struct scb *scb;
pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1,
- PCI_DMA_FROMDEVICE);
+ PCI_DMA_TODEVICE);
pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1,
PCI_DMA_FROMDEVICE);
BUG_ON(!task);
pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1,
- PCI_DMA_FROMDEVICE);
+ PCI_DMA_TODEVICE);
pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1,
PCI_DMA_FROMDEVICE);
}
*len = 0;
+ if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
+ sg = scsi_sglist(cmd);
+ scb->dma_h_bulkdata = sg_dma_address(sg);
+ *buf = (u32)scb->dma_h_bulkdata;
+ *len = sg_dma_len(sg);
+ return 0;
+ }
+
scsi_for_each_sg(cmd, sg, sgcnt, idx) {
if (adapter->has_64bit_addr) {
scb->sgl64[idx].address = sg_dma_address(sg);
up->smc_tfcr = SMC_EB;
}
-#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0])
+#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0))
#endif
PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
/* too generic */
/* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
/* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
fput(file);
return -EAGAIN;
}
+ req->ki_filp = file;
if (iocb->aio_flags & IOCB_FLAG_RESFD) {
/*
* If the IOCB_FLAG_RESFD flag of aio_flags is set, get an
}
}
- req->ki_filp = file;
ret = put_user(req->ki_key, &user_iocb->aio_key);
if (unlikely(ret)) {
dprintk("EFAULT: aio_key\n");
* __start to address 4 so that is okay).
*/
if (rev > OLD_FLAT_VERSION) {
+ unsigned long persistent = 0;
for (i=0; i < relocs; i++) {
unsigned long addr, relval;
relocated (of course, the address has to be
relocated first). */
relval = ntohl(reloc[i]);
+ if (flat_set_persistent (relval, &persistent))
+ continue;
addr = flat_get_relocate_addr(relval);
rp = (unsigned long *) calc_reloc(addr, libinfo, id, 1);
if (rp == (unsigned long *)RELOC_FAILED) {
}
/* Get the pointer's value. */
- addr = flat_get_addr_from_rp(rp, relval, flags);
+ addr = flat_get_addr_from_rp(rp, relval, flags,
+ &persistent);
if (addr != 0) {
/*
* Do the relocation. PIC relocs in the data section are
return nlm_granted;
/* Create host handle for callback */
host = nlmsvc_lookup_host(rqstp, lock->caller, lock->len);
- if (host == NULL)
+ if (host == NULL) {
+ kfree(conf);
return nlm_lck_denied_nolocks;
+ }
block = nlmsvc_create_block(rqstp, host, file, lock, cookie);
if (block == NULL) {
kfree(conf);
server->namelen = data->namlen;
/* Create a client RPC handle for the NFSv3 ACL management interface */
nfs_init_server_aclclient(server);
- if (clp->cl_nfsversion == 3) {
- if (server->namelen == 0 || server->namelen > NFS3_MAXNAMLEN)
- server->namelen = NFS3_MAXNAMLEN;
- if (!(data->flags & NFS_MOUNT_NORDIRPLUS))
- server->caps |= NFS_CAP_READDIRPLUS;
- } else {
- if (server->namelen == 0 || server->namelen > NFS2_MAXNAMLEN)
- server->namelen = NFS2_MAXNAMLEN;
- }
-
dprintk("<-- nfs_init_server() = 0 [new %p]\n", clp);
return 0;
error = nfs_probe_fsinfo(server, mntfh, &fattr);
if (error < 0)
goto error;
+ if (server->nfs_client->rpc_ops->version == 3) {
+ if (server->namelen == 0 || server->namelen > NFS3_MAXNAMLEN)
+ server->namelen = NFS3_MAXNAMLEN;
+ if (!(data->flags & NFS_MOUNT_NORDIRPLUS))
+ server->caps |= NFS_CAP_READDIRPLUS;
+ } else {
+ if (server->namelen == 0 || server->namelen > NFS2_MAXNAMLEN)
+ server->namelen = NFS2_MAXNAMLEN;
+ }
+
if (!(fattr.valid & NFS_ATTR_FATTR)) {
error = server->nfs_client->rpc_ops->getattr(server, mntfh, &fattr);
if (error < 0) {
if (error < 0)
goto error;
+ if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+ server->namelen = NFS4_MAXNAMLEN;
+
BUG_ON(!server->nfs_client);
BUG_ON(!server->nfs_client->rpc_ops);
BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
if (error < 0)
goto error;
+ if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+ server->namelen = NFS4_MAXNAMLEN;
+
dprintk("Referral FSID: %llx:%llx\n",
(unsigned long long) server->fsid.major,
(unsigned long long) server->fsid.minor);
if (error < 0)
goto out_free_server;
+ if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+ server->namelen = NFS4_MAXNAMLEN;
+
dprintk("Cloned FSID: %llx:%llx\n",
(unsigned long long) server->fsid.major,
(unsigned long long) server->fsid.minor);
}
if (!desc->plus || !(entry->fattr->valid & NFS_ATTR_FATTR))
return NULL;
+ if (name.len > NFS_SERVER(dir)->namelen)
+ return NULL;
/* Note: caller is already holding the dir->i_mutex! */
dentry = d_alloc(parent, &name);
if (dentry == NULL)
path++;
name.len = path - (const char *) name.name;
+ if (name.len > NFS4_MAXNAMLEN)
+ return -ENAMETOOLONG;
+
eat_dot_dir:
while (*path == '/')
path++;
ac->ac_bh = osb->local_alloc_bh;
status = 0;
bail:
- if (status < 0 && local_alloc_inode)
+ if (status < 0 && local_alloc_inode) {
+ mutex_unlock(&local_alloc_inode->i_mutex);
iput(local_alloc_inode);
+ }
mlog_exit(status);
return status;
}
/*
+ * Do a copy-from-user while holding the mmap_semaphore for reading, in a
+ * manner safe from deadlocking with simultaneous mmap() (grabbing mmap_sem
+ * for writing) and page faulting on the user memory pointed to by src.
+ * This assumes that we will very rarely hit the partial != 0 path, or this
+ * will not be a win.
+ */
+static int copy_from_user_mmap_sem(void *dst, const void __user *src, size_t n)
+{
+ int partial;
+
+ pagefault_disable();
+ partial = __copy_from_user_inatomic(dst, src, n);
+ pagefault_enable();
+
+ /*
+ * Didn't copy everything, drop the mmap_sem and do a faulting copy
+ */
+ if (unlikely(partial)) {
+ up_read(¤t->mm->mmap_sem);
+ partial = copy_from_user(dst, src, n);
+ down_read(¤t->mm->mmap_sem);
+ }
+
+ return partial;
+}
+
+/*
* Map an iov into an array of pages and offset/length tupples. With the
* partial_page structure, we can map several non-contiguous ranges into
* our ones pages[] map instead of splitting that operation into pieces.
{
int buffers = 0, error = 0;
- /*
- * It's ok to take the mmap_sem for reading, even
- * across a "get_user()".
- */
down_read(¤t->mm->mmap_sem);
while (nr_vecs) {
unsigned long off, npages;
+ struct iovec entry;
void __user *base;
size_t len;
int i;
- /*
- * Get user address base and length for this iovec.
- */
- error = get_user(base, &iov->iov_base);
- if (unlikely(error))
- break;
- error = get_user(len, &iov->iov_len);
- if (unlikely(error))
+ error = -EFAULT;
+ if (copy_from_user_mmap_sem(&entry, iov, sizeof(entry)))
break;
+ base = entry.iov_base;
+ len = entry.iov_len;
+
/*
* Sanity check this iovec. 0 read succeeds.
*/
+ error = 0;
if (unlikely(!len))
break;
error = -EFAULT;
#define XFS_BLI_UDQUOT_BUF 0x4
#define XFS_BLI_PDQUOT_BUF 0x8
#define XFS_BLI_GDQUOT_BUF 0x10
-/*
- * This flag indicates that the buffer contains newly allocated
- * inodes.
- */
-#define XFS_BLI_INODE_NEW_BUF 0x20
#define XFS_BLI_CHUNK 128
#define XFS_BLI_SHIFT 7
/*ARGSUSED*/
STATIC void
xlog_recover_do_reg_buffer(
- xfs_mount_t *mp,
xlog_recover_item_t *item,
xfs_buf_t *bp,
xfs_buf_log_format_t *buf_f)
unsigned int *data_map = NULL;
unsigned int map_size = 0;
int error;
- int stale_buf = 1;
-
- /*
- * Scan through the on-disk inode buffer and attempt to
- * determine if it has been written to since it was logged.
- *
- * - If any of the magic numbers are incorrect then the buffer is stale
- * - If any of the modes are non-zero then the buffer is not stale
- * - If all of the modes are zero and at least one of the generation
- * counts is non-zero then the buffer is stale
- *
- * If the end result is a stale buffer then the log buffer is replayed
- * otherwise it is skipped.
- *
- * This heuristic is not perfect. It can be improved by scanning the
- * entire inode chunk for evidence that any of the inode clusters have
- * been updated. To fix this problem completely we will need a major
- * architectural change to the logging system.
- */
- if (buf_f->blf_flags & XFS_BLI_INODE_NEW_BUF) {
- xfs_dinode_t *dip;
- int inodes_per_buf;
- int mode_count = 0;
- int gen_count = 0;
-
- stale_buf = 0;
- inodes_per_buf = XFS_BUF_COUNT(bp) >> mp->m_sb.sb_inodelog;
- for (i = 0; i < inodes_per_buf; i++) {
- dip = (xfs_dinode_t *)xfs_buf_offset(bp,
- i * mp->m_sb.sb_inodesize);
- if (be16_to_cpu(dip->di_core.di_magic) !=
- XFS_DINODE_MAGIC) {
- stale_buf = 1;
- break;
- }
- if (dip->di_core.di_mode)
- mode_count++;
- if (dip->di_core.di_gen)
- gen_count++;
- }
-
- if (!mode_count && gen_count)
- stale_buf = 1;
- }
switch (buf_f->blf_type) {
case XFS_LI_BUF:
-1, 0, XFS_QMOPT_DOWARN,
"dquot_buf_recover");
}
- if (!error && stale_buf)
+ if (!error)
memcpy(xfs_buf_offset(bp,
(uint)bit << XFS_BLI_SHIFT), /* dest */
item->ri_buf[i].i_addr, /* source */
if (log->l_quotaoffs_flag & type)
return;
- xlog_recover_do_reg_buffer(mp, item, bp, buf_f);
+ xlog_recover_do_reg_buffer(item, bp, buf_f);
}
/*
(XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) {
xlog_recover_do_dquot_buffer(mp, log, item, bp, buf_f);
} else {
- xlog_recover_do_reg_buffer(mp, item, bp, buf_f);
+ xlog_recover_do_reg_buffer(item, bp, buf_f);
}
if (error)
return XFS_ERROR(error);
ASSERT(atomic_read(&bip->bli_refcount) > 0);
bip->bli_flags |= XFS_BLI_INODE_ALLOC_BUF;
- bip->bli_format.blf_flags |= XFS_BLI_INODE_NEW_BUF;
}
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 1
}
};
+#define DRIVER_NAME "bfin-uart"
int nr_ports = NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_input(uart->rts_pin);
}
#endif
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 2
int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+#define DRIVER_NAME "bfin-uart"
+
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
- unsigned short val;
- val = bfin_read16(BFIN_PORT_MUX);
- val &= ~(PFDE | PFTE);
- bfin_write16(BFIN_PORT_MUX, val);
- val = bfin_read16(PORTF_FER);
- val |= 0xF;
- bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ peripheral_request(P_UART1_TX, DRIVER_NAME);
+ peripheral_request(P_UART1_RX, DRIVER_NAME);
+#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_output(uart->rts_pin);
}
#endif
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
-#endif /* _MACH_PORTMUX_H_ */
+#define P_MII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MDC, \
+ P_MDIO, 0}
+
+
+#define P_RMII0 {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_RMII0_REF_CLK, \
+ P_RMII0_MDINT, \
+ P_RMII0_CRS_DV, \
+ P_MDC, \
+ P_MDIO, 0}
+#endif /* _MACH_PORTMUX_H_ */
#include <linux/serial.h>
#include <asm/dma.h>
+#include <asm/portmux.h>
#define NR_PORTS 1
}
};
+#define DRIVER_NAME "bfin-uart"
int nr_ports = NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ peripheral_request(P_UART0_TX, DRIVER_NAME);
+ peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
- gpio_request(uart->cts_pin, NULL);
+ gpio_request(uart->cts_pin, DRIVER_NAME);
gpio_direction_input(uart->cts_pin);
}
if (uart->rts_pin >= 0) {
- gpio_request(uart->rts_pin, NULL);
+ gpio_request(uart->rts_pin, DRIVER_NAME);
gpio_direction_input(uart->rts_pin);
}
#endif
#define P_MAYSHARE 0x2000
#define P_DONTCARE 0x1000
+
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(unsigned short per[], const char *label);
+void peripheral_free_list(unsigned short per[]);
+
#include <asm/gpio.h>
#include <asm/mach/portmux.h>
#define P_SPI2_SSEL3 P_UNDEF
#endif
+#ifndef P_SPI2_SSEL4
+#define P_SPI2_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL5
+#define P_SPI2_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL6
+#define P_SPI2_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL7
+#define P_SPI2_SSEL7 P_UNDEF
+#endif
+
#ifndef P_SPI2_SCK
#define P_SPI2_SCK P_UNDEF
#endif
#define P_SPI0_SSEL3 P_UNDEF
#endif
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
#ifndef P_UART0_TX
#define P_UART0_TX P_UNDEF
#endif
#define P_SPI1_SSEL3 P_UNDEF
#endif
+
+#ifndef P_SPI1_SSEL4
+#define P_SPI1_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL5
+#define P_SPI1_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL6
+#define P_SPI1_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL7
+#define P_SPI1_SSEL7 P_UNDEF
+#endif
+
#ifndef P_SPI1_SCK
#define P_SPI1_SCK P_UNDEF
#endif
/*
* This file contains the system call numbers.
*/
+#define __NR_restart_syscall 0
#define __NR_exit 1
#define __NR_fork 2
#define __NR_read 3
#define __NR_sched_get_priority_min 160
#define __NR_sched_rr_get_interval 161
#define __NR_nanosleep 162
- /* 163 __NR_mremap */
+#define __NR_mremap 163
#define __NR_setresuid 164
#define __NR_getresuid 165
/* 166 __NR_vm86 */
/* 167 __NR_query_module */
/* 168 __NR_poll */
- /* 169 __NR_nfsservctl */
+#define __NR_nfsservctl 169
#define __NR_setresgid 170
#define __NR_getresgid 171
#define __NR_prctl 172
/* 222 reserved for TUX */
/* 223 reserved for TUX */
#define __NR_gettid 224
- /* 225 __NR_readahead */
+#define __NR_readahead 225
#define __NR_setxattr 226
#define __NR_lsetxattr 227
#define __NR_fsetxattr 228
#define __NR_mq_timedreceive (__NR_mq_open+3)
#define __NR_mq_notify (__NR_mq_open+4)
#define __NR_mq_getsetattr (__NR_mq_open+5)
- /* 284 __NR_sys_kexec_load */
+#define __NR_kexec_load 284
#define __NR_waitid 285
#define __NR_add_key 286
#define __NR_request_key 287
#define __NR_shmdt 340
#define __NR_shmget 341
-#define __NR_syscall 342
+#define __NR_splice 342
+#define __NR_sync_file_range 343
+#define __NR_tee 344
+#define __NR_vmsplice 345
+
+#define __NR_epoll_pwait 346
+#define __NR_utimensat 347
+#define __NR_signalfd 348
+#define __NR_timerfd 349
+#define __NR_eventfd 350
+#define __NR_pread64 351
+#define __NR_pwrite64 352
+#define __NR_fadvise64 353
+#define __NR_set_robust_list 354
+#define __NR_get_robust_list 355
+#define __NR_fallocate 356
+
+#define __NR_syscall 357
#define NR_syscalls __NR_syscall
+/* Old optional stuff no one actually uses */
+#define __IGNORE_sysfs
+#define __IGNORE_uselib
+
+/* Implement the newer interfaces */
+#define __IGNORE_mmap
+#define __IGNORE_poll
+#define __IGNORE_select
+#define __IGNORE_utime
+
+/* Not relevant on no-mmu */
+#define __IGNORE_swapon
+#define __IGNORE_swapoff
+#define __IGNORE_msync
+#define __IGNORE_mlock
+#define __IGNORE_munlock
+#define __IGNORE_mlockall
+#define __IGNORE_munlockall
+#define __IGNORE_mincore
+#define __IGNORE_madvise
+#define __IGNORE_remap_file_pages
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+#define __IGNORE_getcpu
+
#ifdef __KERNEL__
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_STAT64
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_set_persistent(relval, p) 0
/*
* on the H8 a couple of the relocations have an instruction in the
*/
#define flat_get_relocate_addr(rel) (rel)
-#define flat_get_addr_from_rp(rp, relval, flags) \
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
(get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
#define flat_put_addr_at_rp(rp, addr, rel) \
put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
*/
-/*
- * Actually only lfence would be needed for mb() because all stores done
- * by the kernel should be already ordered. But keep a full barrier for now.
- */
-
#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
+#define flat_set_persistent(relval, p) 0
#define flat_reloc_valid(reloc, size) \
(((reloc) - textlen_for_m32r_lo16_data) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags) \
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
m32r_flat_get_addr_from_rp(rp, relval, (text_len) )
#define flat_put_addr_at_rp(rp, addr, relval) \
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
#define flat_get_relocate_addr(rel) (rel)
+#define flat_set_persistent(relval, p) 0
#endif /* __M68KNOMMU_FLAT_H__ */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_CMPXCHG_H
+#define __ASM_CMPXCHG_H
+
+#include <linux/irqflags.h>
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define __cmpxchg_asm(ld, st, m, old, new) \
+({ \
+ __typeof(*(m)) __ret; \
+ \
+ if (cpu_has_llsc && R10000_LLSC_WAR) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: " ld " %0, %2 # __cmpxchg_asm \n" \
+ " bne %0, %z3, 2f \n" \
+ " .set mips0 \n" \
+ " move $1, %z4 \n" \
+ " .set mips3 \n" \
+ " " st " $1, %1 \n" \
+ " beqzl $1, 1b \n" \
+ "2: \n" \
+ " .set pop \n" \
+ : "=&r" (__ret), "=R" (*m) \
+ : "R" (*m), "Jr" (old), "Jr" (new) \
+ : "memory"); \
+ } else if (cpu_has_llsc) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: " ld " %0, %2 # __cmpxchg_asm \n" \
+ " bne %0, %z3, 2f \n" \
+ " .set mips0 \n" \
+ " move $1, %z4 \n" \
+ " .set mips3 \n" \
+ " " st " $1, %1 \n" \
+ " beqz $1, 3f \n" \
+ "2: \n" \
+ " .subsection 2 \n" \
+ "3: b 1b \n" \
+ " .previous \n" \
+ " .set pop \n" \
+ : "=&r" (__ret), "=R" (*m) \
+ : "R" (*m), "Jr" (old), "Jr" (new) \
+ : "memory"); \
+ } else { \
+ unsigned long __flags; \
+ \
+ raw_local_irq_save(__flags); \
+ __ret = *m; \
+ if (__ret == old) \
+ *m = new; \
+ raw_local_irq_restore(__flags); \
+ } \
+ \
+ __ret; \
+})
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __cmpxchg(ptr,old,new,barrier) \
+({ \
+ __typeof__(ptr) __ptr = (ptr); \
+ __typeof__(*(ptr)) __old = (old); \
+ __typeof__(*(ptr)) __new = (new); \
+ __typeof__(*(ptr)) __res = 0; \
+ \
+ barrier; \
+ \
+ switch (sizeof(*(__ptr))) { \
+ case 4: \
+ __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \
+ break; \
+ case 8: \
+ if (sizeof(long) == 8) { \
+ __res = __cmpxchg_asm("lld", "scd", __ptr, \
+ __old, __new); \
+ break; \
+ } \
+ default: \
+ __cmpxchg_called_with_bad_pointer(); \
+ break; \
+ } \
+ \
+ barrier; \
+ \
+ __res; \
+})
+
+#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new,)
+
+#endif /* __ASM_CMPXCHG_H */
#define O_SYNC 0x0010
#define O_NONBLOCK 0x0080
#define O_CREAT 0x0100 /* not fcntl */
+#define O_TRUNC 0x0200 /* not fcntl */
#define O_EXCL 0x0400 /* not fcntl */
#define O_NOCTTY 0x0800 /* not fcntl */
#define FASYNC 0x1000 /* fcntl, for BSD compatibility */
#include <linux/percpu.h>
#include <linux/bitops.h>
#include <asm/atomic.h>
+#include <asm/cmpxchg.h>
#include <asm/war.h>
typedef struct
return result;
}
-/*
- * local_sub_if_positive - conditionally subtract integer from atomic variable
- * @i: integer value to subtract
- * @l: pointer of type local_t
- *
- * Atomically test @l and subtract @i if @l is greater or equal than @i.
- * The function returns the old value of @l minus @i.
- */
-static __inline__ long local_sub_if_positive(long i, local_t * l)
-{
- unsigned long result;
-
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- unsigned long temp;
-
- __asm__ __volatile__(
- " .set mips3 \n"
- "1:" __LL "%1, %2 # local_sub_if_positive\n"
- " dsubu %0, %1, %3 \n"
- " bltz %0, 1f \n"
- __SC "%0, %2 \n"
- " .set noreorder \n"
- " beqzl %0, 1b \n"
- " dsubu %0, %1, %3 \n"
- " .set reorder \n"
- "1: \n"
- " .set mips0 \n"
- : "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
- : "Ir" (i), "m" (l->a.counter)
- : "memory");
- } else if (cpu_has_llsc) {
- unsigned long temp;
-
- __asm__ __volatile__(
- " .set mips3 \n"
- "1:" __LL "%1, %2 # local_sub_if_positive\n"
- " dsubu %0, %1, %3 \n"
- " bltz %0, 1f \n"
- __SC "%0, %2 \n"
- " .set noreorder \n"
- " beqz %0, 1b \n"
- " dsubu %0, %1, %3 \n"
- " .set reorder \n"
- "1: \n"
- " .set mips0 \n"
- : "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
- : "Ir" (i), "m" (l->a.counter)
- : "memory");
- } else {
- unsigned long flags;
-
- local_irq_save(flags);
- result = l->a.counter;
- result -= i;
- if (result >= 0)
- l->a.counter = result;
- local_irq_restore(flags);
- }
-
- return result;
-}
-
#define local_cmpxchg(l, o, n) \
((long)cmpxchg_local(&((l)->a.counter), (o), (n)))
#define local_xchg(l, n) (xchg_local(&((l)->a.counter),(n)))
#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0)
/*
- * local_dec_if_positive - decrement by 1 if old value positive
- * @l: pointer of type local_t
- */
-#define local_dec_if_positive(l) local_sub_if_positive(1, l)
-
-/*
* local_add_negative - add and test if negative
* @l: pointer of type local_t
* @i: integer value to add
/*
* __pa()/__va() should be used only during mem init.
*/
-#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
+#ifdef CONFIG_64BIT
#define __pa(x) \
({ \
unsigned long __x = (unsigned long)(x); \
#include <asm/addrspace.h>
#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
#include <asm/cpu-features.h>
#include <asm/dsp.h>
#include <asm/war.h>
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
- unsigned long new)
-{
- __u32 retval;
-
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: ll %0, %2 # __cmpxchg_u32 \n"
- " bne %0, %z3, 2f \n"
- " .set mips0 \n"
- " move $1, %z4 \n"
- " .set mips3 \n"
- " sc $1, %1 \n"
- " beqzl $1, 1b \n"
- "2: \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else if (cpu_has_llsc) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: ll %0, %2 # __cmpxchg_u32 \n"
- " bne %0, %z3, 2f \n"
- " .set mips0 \n"
- " move $1, %z4 \n"
- " .set mips3 \n"
- " sc $1, %1 \n"
- " beqz $1, 3f \n"
- "2: \n"
- " .subsection 2 \n"
- "3: b 1b \n"
- " .previous \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else {
- unsigned long flags;
-
- raw_local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- raw_local_irq_restore(flags); /* implies memory barrier */
- }
-
- smp_llsc_mb();
-
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u32_local(volatile int * m,
- unsigned long old, unsigned long new)
-{
- __u32 retval;
-
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: ll %0, %2 # __cmpxchg_u32 \n"
- " bne %0, %z3, 2f \n"
- " .set mips0 \n"
- " move $1, %z4 \n"
- " .set mips3 \n"
- " sc $1, %1 \n"
- " beqzl $1, 1b \n"
- "2: \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else if (cpu_has_llsc) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: ll %0, %2 # __cmpxchg_u32 \n"
- " bne %0, %z3, 2f \n"
- " .set mips0 \n"
- " move $1, %z4 \n"
- " .set mips3 \n"
- " sc $1, %1 \n"
- " beqz $1, 1b \n"
- "2: \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else {
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags); /* implies memory barrier */
- }
-
- return retval;
-}
-
-#ifdef CONFIG_64BIT
-static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old,
- unsigned long new)
-{
- __u64 retval;
-
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: lld %0, %2 # __cmpxchg_u64 \n"
- " bne %0, %z3, 2f \n"
- " move $1, %z4 \n"
- " scd $1, %1 \n"
- " beqzl $1, 1b \n"
- "2: \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else if (cpu_has_llsc) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: lld %0, %2 # __cmpxchg_u64 \n"
- " bne %0, %z3, 2f \n"
- " move $1, %z4 \n"
- " scd $1, %1 \n"
- " beqz $1, 3f \n"
- "2: \n"
- " .subsection 2 \n"
- "3: b 1b \n"
- " .previous \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else {
- unsigned long flags;
-
- raw_local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- raw_local_irq_restore(flags); /* implies memory barrier */
- }
-
- smp_llsc_mb();
-
- return retval;
-}
-
-static inline unsigned long __cmpxchg_u64_local(volatile int * m,
- unsigned long old, unsigned long new)
-{
- __u64 retval;
-
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: lld %0, %2 # __cmpxchg_u64 \n"
- " bne %0, %z3, 2f \n"
- " move $1, %z4 \n"
- " scd $1, %1 \n"
- " beqzl $1, 1b \n"
- "2: \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else if (cpu_has_llsc) {
- __asm__ __volatile__(
- " .set push \n"
- " .set noat \n"
- " .set mips3 \n"
- "1: lld %0, %2 # __cmpxchg_u64 \n"
- " bne %0, %z3, 2f \n"
- " move $1, %z4 \n"
- " scd $1, %1 \n"
- " beqz $1, 1b \n"
- "2: \n"
- " .set pop \n"
- : "=&r" (retval), "=R" (*m)
- : "R" (*m), "Jr" (old), "Jr" (new)
- : "memory");
- } else {
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags); /* implies memory barrier */
- }
-
- return retval;
-}
-
-#else
-extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels(
- volatile int * m, unsigned long old, unsigned long new);
-#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels
-extern unsigned long __cmpxchg_u64_local_unsupported_on_32bit_kernels(
- volatile int * m, unsigned long old, unsigned long new);
-#define __cmpxchg_u64_local __cmpxchg_u64_local_unsupported_on_32bit_kernels
-#endif
-
-/* This function doesn't exist, so you'll get a linker error
- if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
- case 8:
- return __cmpxchg_u64(ptr, old, new);
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-static inline unsigned long __cmpxchg_local(volatile void * ptr,
- unsigned long old, unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32_local(ptr, old, new);
- case 8:
- return __cmpxchg_u64_local(ptr, old, new);
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define cmpxchg(ptr,old,new) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), \
- (unsigned long)(old), (unsigned long)(new),sizeof(*(ptr))))
-
-#define cmpxchg_local(ptr,old,new) \
- ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
- (unsigned long)(old), (unsigned long)(new),sizeof(*(ptr))))
-
extern void set_handler (unsigned long offset, void *addr, unsigned long len);
extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len);
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
#define flat_get_relocate_addr(rel) (rel)
+#define flat_set_persistent(relval, p) 0
#endif /* __ASM_SH_FLAT_H */
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
+#define flat_set_persistent(relval, p) 0
/* We store the type of relocation in the top 4 bits of the `relval.' */
For the v850, RP should always be half-word aligned. */
static inline unsigned long flat_get_addr_from_rp (unsigned long *rp,
unsigned long relval,
- unsigned long flags)
+ unsigned long flags,
+ unsigned long *persistent)
{
short *srp = (short *)rp;
#define ARCH_HAS_PREFETCH
static inline void prefetch(void *x)
{
- asm volatile("prefetcht0 %0" :: "m" (*(unsigned long *)x));
+ asm volatile("prefetcht0 (%0)" :: "r" (x));
}
#define ARCH_HAS_PREFETCHW 1
#define FSHIFT 11 /* nr of bits of precision */
#define FIXED_1 (1<<FSHIFT) /* 1.0 as fixed-point */
-#define LOAD_FREQ (5*HZ) /* 5 sec intervals */
+#define LOAD_FREQ (5*HZ+1) /* 5 sec intervals */
#define EXP_1 1884 /* 1/exp(5sec/1min) as fixed-point */
#define EXP_5 2014 /* 1/exp(5sec/5min) */
#define EXP_15 2037 /* 1/exp(5sec/15min) */
loff_t pos, loff_t count);
int sync_page_range_nolock(struct inode *inode, struct address_space *mapping,
loff_t pos, loff_t count);
-void set_page_dirty_balance(struct page *page);
+void set_page_dirty_balance(struct page *page, int page_mkwrite);
void writeback_set_ratelimit(void);
/* pdflush.c */
extern void rose_enquiry_response(struct sock *);
/* rose_route.c */
-extern struct rose_neigh rose_loopback_neigh;
+extern struct rose_neigh *rose_loopback_neigh;
extern const struct file_operations rose_neigh_fops;
extern const struct file_operations rose_nodes_fops;
extern const struct file_operations rose_routes_fops;
};
struct tcp4_md5sig_key {
- u8 *key;
- u16 keylen;
+ struct tcp_md5sig_key base;
__be32 addr;
};
struct tcp6_md5sig_key {
- u8 *key;
- u16 keylen;
+ struct tcp_md5sig_key base;
#if 0
u32 scope_id; /* XXX */
#endif
void exit_robust_list(struct task_struct *curr)
{
struct robust_list_head __user *head = curr->robust_list;
- struct robust_list __user *entry, *pending;
- unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+ struct robust_list __user *entry, *next_entry, *pending;
+ unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
unsigned long futex_offset;
+ int rc;
/*
* Fetch the list head (which was registered earlier, via
if (fetch_robust_entry(&pending, &head->list_op_pending, &pip))
return;
- if (pending)
- handle_futex_death((void __user *)pending + futex_offset,
- curr, pip);
-
+ next_entry = NULL; /* avoid warning with gcc */
while (entry != &head->list) {
/*
+ * Fetch the next entry in the list before calling
+ * handle_futex_death:
+ */
+ rc = fetch_robust_entry(&next_entry, &entry->next, &next_pi);
+ /*
* A pending lock might already be on the list, so
* don't process it twice:
*/
if (handle_futex_death((void __user *)entry + futex_offset,
curr, pi))
return;
- /*
- * Fetch the next entry in the list:
- */
- if (fetch_robust_entry(&entry, &entry->next, &pi))
+ if (rc)
return;
+ entry = next_entry;
+ pi = next_pi;
/*
* Avoid excessively long or circular lists:
*/
cond_resched();
}
+
+ if (pending)
+ handle_futex_death((void __user *)pending + futex_offset,
+ curr, pip);
}
long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
void compat_exit_robust_list(struct task_struct *curr)
{
struct compat_robust_list_head __user *head = curr->compat_robust_list;
- struct robust_list __user *entry, *pending;
- unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
- compat_uptr_t uentry, upending;
+ struct robust_list __user *entry, *next_entry, *pending;
+ unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+ compat_uptr_t uentry, next_uentry, upending;
compat_long_t futex_offset;
+ int rc;
/*
* Fetch the list head (which was registered earlier, via
if (fetch_robust_entry(&upending, &pending,
&head->list_op_pending, &pip))
return;
- if (pending)
- handle_futex_death((void __user *)pending + futex_offset, curr, pip);
+ next_entry = NULL; /* avoid warning with gcc */
while (entry != (struct robust_list __user *) &head->list) {
/*
+ * Fetch the next entry in the list before calling
+ * handle_futex_death:
+ */
+ rc = fetch_robust_entry(&next_uentry, &next_entry,
+ (compat_uptr_t __user *)&entry->next, &next_pi);
+ /*
* A pending lock might already be on the list, so
* dont process it twice:
*/
curr, pi))
return;
- /*
- * Fetch the next entry in the list:
- */
- if (fetch_robust_entry(&uentry, &entry,
- (compat_uptr_t __user *)&entry->next, &pi))
+ if (rc)
return;
+ uentry = next_uentry;
+ entry = next_entry;
+ pi = next_pi;
/*
* Avoid excessively long or circular lists:
*/
cond_resched();
}
+ if (pending)
+ handle_futex_death((void __user *)pending + futex_offset,
+ curr, pip);
}
asmlinkage long
se->block_start = 0;
se->sum_sleep_runtime += delta;
+
+ /*
+ * Blocking time is in units of nanosecs, so shift by 20 to
+ * get a milliseconds-range estimation of the amount of
+ * time that the task spent sleeping:
+ */
+ if (unlikely(prof_on == SLEEP_PROFILING)) {
+ profile_hits(SLEEP_PROFILING, (void *)get_wchan(tsk),
+ delta >> 20);
+ }
}
#endif
}
if (!valid_signal(sig))
return error;
- error = audit_signal_info(sig, t); /* Let audit system see the signal */
- if (error)
- return error;
-
- error = -EPERM;
- if ((info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info)))
- && ((sig != SIGCONT) ||
- (process_session(current) != process_session(t)))
- && (current->euid ^ t->suid) && (current->euid ^ t->uid)
- && (current->uid ^ t->suid) && (current->uid ^ t->uid)
- && !capable(CAP_KILL))
+ if (info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info))) {
+ error = audit_signal_info(sig, t); /* Let audit system see the signal */
+ if (error)
+ return error;
+ error = -EPERM;
+ if (((sig != SIGCONT) ||
+ (process_session(current) != process_session(t)))
+ && (current->euid ^ t->suid) && (current->euid ^ t->uid)
+ && (current->uid ^ t->suid) && (current->uid ^ t->uid)
+ && !capable(CAP_KILL))
return error;
+ }
return security_task_kill(t, info, sig, 0);
}
#include <linux/getcpu.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/seccomp.h>
+#include <linux/cpu.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
kernel_shutdown_prepare(SYSTEM_POWER_OFF);
if (pm_power_off_prepare)
pm_power_off_prepare();
+ disable_nonboot_cpus();
sysdev_shutdown();
printk(KERN_EMERG "Power down.\n");
machine_power_off();
ms = 1;
if (events && period.tv_sec)
- seq_printf(m, "%ld total events, %ld.%ld events/sec\n", events,
- events / period.tv_sec, events * 1000 / ms);
+ seq_printf(m, "%ld total events, %ld.%03ld events/sec\n",
+ events, events * 1000 / ms,
+ (events * 1000000 / ms) % 1000);
else
seq_printf(m, "%ld total events\n", events);
help
This feature enables tracking lock contention points
+ For more details, see Documentation/lockstat.txt
+
config DEBUG_LOCKDEP
bool "Lock dependency engine debugging"
depends on DEBUG_KERNEL && LOCKDEP
# Makefile for some libs needed in the kernel.
#
-lib-y := ctype.o string.o vsprintf.o kasprintf.o cmdline.o \
+lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o dump_stack.o \
idr.o int_sqrt.o bitmap.o extable.o prio_tree.o \
sha1.o irq_regs.o reciprocal_div.o argv_split.o
lib-y += kobject.o kref.o kobject_uevent.o klist.o
obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
- bust_spinlocks.o hexdump.o
+ bust_spinlocks.o hexdump.o kasprintf.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
int
default "4096" if ARM && !CPU_CACHE_VIPT
default "4096" if PARISC && !PA20
+ default "4096" if XEN
default "4"
#
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (unlikely(vmf->pgoff >= size)) {
unlock_page(page);
+ page_cache_release(page);
goto outside_data_content;
}
if (vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR))
goto out;
- if (!vma->vm_flags & VM_CAN_NONLINEAR)
+ if (!(vma->vm_flags & VM_CAN_NONLINEAR))
goto out;
if (end <= start || start < vma->vm_start || end > vma->vm_end)
might_sleep();
for (i = 0; i < (HPAGE_SIZE/PAGE_SIZE); i++) {
cond_resched();
- clear_user_highpage(page + i, addr);
+ clear_user_highpage(page + i, addr + i * PAGE_SIZE);
}
}
struct page *old_page, *new_page;
pte_t entry;
int reuse = 0, ret = 0;
+ int page_mkwrite = 0;
struct page *dirty_page = NULL;
old_page = vm_normal_page(vma, address, orig_pte);
page_cache_release(old_page);
if (!pte_same(*page_table, orig_pte))
goto unlock;
+
+ page_mkwrite = 1;
}
dirty_page = old_page;
get_page(dirty_page);
* do_no_page is protected similarly.
*/
wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page);
+ set_page_dirty_balance(dirty_page, page_mkwrite);
put_page(dirty_page);
}
return ret;
* do not need to flush old virtual caches or the TLB.
*
* We enter with non-exclusive mmap_sem (to exclude vma changes,
- * but allow concurrent faults), and pte mapped but not yet locked.
+ * but allow concurrent faults), and pte neither mapped nor locked.
* We return with mmap_sem still held, but pte unmapped and unlocked.
*/
static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long address, pte_t *page_table, pmd_t *pmd,
+ unsigned long address, pmd_t *pmd,
pgoff_t pgoff, unsigned int flags, pte_t orig_pte)
{
+ pte_t *page_table;
spinlock_t *ptl;
struct page *page;
pte_t entry;
struct page *dirty_page = NULL;
struct vm_fault vmf;
int ret;
+ int page_mkwrite = 0;
vmf.virtual_address = (void __user *)(address & PAGE_MASK);
vmf.pgoff = pgoff;
vmf.flags = flags;
vmf.page = NULL;
- pte_unmap(page_table);
BUG_ON(vma->vm_flags & VM_PFNMAP);
if (likely(vma->vm_ops->fault)) {
anon = 1; /* no anon but release vmf.page */
goto out;
}
+ page_mkwrite = 1;
}
}
if (anon)
page_cache_release(vmf.page);
else if (dirty_page) {
- set_page_dirty_balance(dirty_page);
+ set_page_dirty_balance(dirty_page, page_mkwrite);
put_page(dirty_page);
}
- vma->vm_start) >> PAGE_CACHE_SHIFT) + vma->vm_pgoff;
unsigned int flags = (write_access ? FAULT_FLAG_WRITE : 0);
- return __do_fault(mm, vma, address, page_table, pmd, pgoff,
- flags, orig_pte);
+ pte_unmap(page_table);
+ return __do_fault(mm, vma, address, pmd, pgoff, flags, orig_pte);
}
}
pgoff = pte_to_pgoff(orig_pte);
-
- return __do_fault(mm, vma, address, page_table, pmd, pgoff,
- flags, orig_pte);
+ return __do_fault(mm, vma, address, pmd, pgoff, flags, orig_pte);
}
/*
pdflush_operation(background_writeout, 0);
}
-void set_page_dirty_balance(struct page *page)
+void set_page_dirty_balance(struct page *page, int page_mkwrite)
{
- if (set_page_dirty(page)) {
+ if (set_page_dirty(page) || page_mkwrite) {
struct address_space *mapping = page_mapping(page);
if (mapping)
frag = WLAN_GET_SEQ_FRAG(sc);
hdrlen = ieee80211_get_hdrlen(fc);
+ if (skb->len < hdrlen) {
+ printk(KERN_INFO "%s: invalid SKB length %d\n",
+ dev->name, skb->len);
+ goto rx_dropped;
+ }
+
/* Put this code here so that we avoid duplicating it in all
* Rx paths. - Jean II */
#ifdef CONFIG_WIRELESS_EXT
sm->associnfo.associating = 1;
/* queue lower level code to do work (if necessary) */
schedule_delayed_work(&sm->associnfo.work, 0);
-out:
+
mutex_unlock(&sm->associnfo.mutex);
return 0;
__u32 dval = min(tp->fackets_out, packets_acked);
tp->fackets_out -= dval;
}
+ /* hint's skb might be NULL but we don't need to care */
+ tp->fastpath_cnt_hint -= min_t(u32, packets_acked,
+ tp->fastpath_cnt_hint);
tp->packets_out -= packets_acked;
BUG_ON(tcp_skb_pcount(skb) == 0);
return NULL;
for (i = 0; i < tp->md5sig_info->entries4; i++) {
if (tp->md5sig_info->keys4[i].addr == addr)
- return (struct tcp_md5sig_key *)
- &tp->md5sig_info->keys4[i];
+ return &tp->md5sig_info->keys4[i].base;
}
return NULL;
}
key = (struct tcp4_md5sig_key *)tcp_v4_md5_do_lookup(sk, addr);
if (key) {
/* Pre-existing entry - just update that one. */
- kfree(key->key);
- key->key = newkey;
- key->keylen = newkeylen;
+ kfree(key->base.key);
+ key->base.key = newkey;
+ key->base.keylen = newkeylen;
} else {
struct tcp_md5sig_info *md5sig;
md5sig->alloced4++;
}
md5sig->entries4++;
- md5sig->keys4[md5sig->entries4 - 1].addr = addr;
- md5sig->keys4[md5sig->entries4 - 1].key = newkey;
- md5sig->keys4[md5sig->entries4 - 1].keylen = newkeylen;
+ md5sig->keys4[md5sig->entries4 - 1].addr = addr;
+ md5sig->keys4[md5sig->entries4 - 1].base.key = newkey;
+ md5sig->keys4[md5sig->entries4 - 1].base.keylen = newkeylen;
}
return 0;
}
for (i = 0; i < tp->md5sig_info->entries4; i++) {
if (tp->md5sig_info->keys4[i].addr == addr) {
/* Free the key */
- kfree(tp->md5sig_info->keys4[i].key);
+ kfree(tp->md5sig_info->keys4[i].base.key);
tp->md5sig_info->entries4--;
if (tp->md5sig_info->entries4 == 0) {
if (tp->md5sig_info->entries4) {
int i;
for (i = 0; i < tp->md5sig_info->entries4; i++)
- kfree(tp->md5sig_info->keys4[i].key);
+ kfree(tp->md5sig_info->keys4[i].base.key);
tp->md5sig_info->entries4 = 0;
tcp_free_md5sig_pool();
}
if (ipv6_addr_equal(dest, target)) {
on_link = 1;
- } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
+ } else if (ipv6_addr_type(target) !=
+ (IPV6_ADDR_UNICAST|IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
- "ICMPv6 Redirect: target address is not link-local.\n");
+ "ICMPv6 Redirect: target address is not link-local unicast.\n");
return;
}
}
if (!ipv6_addr_equal(&ipv6_hdr(skb)->daddr, target) &&
- !(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
+ ipv6_addr_type(target) != (IPV6_ADDR_UNICAST|IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
- "ICMPv6 Redirect: target address is not link-local.\n");
+ "ICMPv6 Redirect: target address is not link-local unicast.\n");
return;
}
for (i = 0; i < tp->md5sig_info->entries6; i++) {
if (ipv6_addr_cmp(&tp->md5sig_info->keys6[i].addr, addr) == 0)
- return (struct tcp_md5sig_key *)&tp->md5sig_info->keys6[i];
+ return &tp->md5sig_info->keys6[i].base;
}
return NULL;
}
key = (struct tcp6_md5sig_key*) tcp_v6_md5_do_lookup(sk, peer);
if (key) {
/* modify existing entry - just update that one */
- kfree(key->key);
- key->key = newkey;
- key->keylen = newkeylen;
+ kfree(key->base.key);
+ key->base.key = newkey;
+ key->base.keylen = newkeylen;
} else {
/* reallocate new list if current one is full. */
if (!tp->md5sig_info) {
ipv6_addr_copy(&tp->md5sig_info->keys6[tp->md5sig_info->entries6].addr,
peer);
- tp->md5sig_info->keys6[tp->md5sig_info->entries6].key = newkey;
- tp->md5sig_info->keys6[tp->md5sig_info->entries6].keylen = newkeylen;
+ tp->md5sig_info->keys6[tp->md5sig_info->entries6].base.key = newkey;
+ tp->md5sig_info->keys6[tp->md5sig_info->entries6].base.keylen = newkeylen;
tp->md5sig_info->entries6++;
}
for (i = 0; i < tp->md5sig_info->entries6; i++) {
if (ipv6_addr_cmp(&tp->md5sig_info->keys6[i].addr, peer) == 0) {
/* Free the key */
- kfree(tp->md5sig_info->keys6[i].key);
+ kfree(tp->md5sig_info->keys6[i].base.key);
tp->md5sig_info->entries6--;
if (tp->md5sig_info->entries6 == 0) {
if (tp->md5sig_info->entries6) {
for (i = 0; i < tp->md5sig_info->entries6; i++)
- kfree(tp->md5sig_info->keys6[i].key);
+ kfree(tp->md5sig_info->keys6[i].base.key);
tp->md5sig_info->entries6 = 0;
tcp_free_md5sig_pool();
}
if (tp->md5sig_info->entries4) {
for (i = 0; i < tp->md5sig_info->entries4; i++)
- kfree(tp->md5sig_info->keys4[i].key);
+ kfree(tp->md5sig_info->keys4[i].base.key);
tp->md5sig_info->entries4 = 0;
tcp_free_md5sig_pool();
}
skb_reset_transport_header(skb);
- sk = rose_find_socket(lci_o, &rose_loopback_neigh);
+ sk = rose_find_socket(lci_o, rose_loopback_neigh);
if (sk) {
if (rose_process_rx_frame(sk, skb) == 0)
kfree_skb(skb);
if (frametype == ROSE_CALL_REQUEST) {
if ((dev = rose_dev_get(dest)) != NULL) {
- if (rose_rx_call_request(skb, dev, &rose_loopback_neigh, lci_o) == 0)
+ if (rose_rx_call_request(skb, dev, rose_loopback_neigh, lci_o) == 0)
kfree_skb(skb);
} else {
kfree_skb(skb);
static struct rose_route *rose_route_list;
static DEFINE_SPINLOCK(rose_route_list_lock);
-struct rose_neigh rose_loopback_neigh;
+struct rose_neigh *rose_loopback_neigh;
/*
* Add a new route to a node, and in the process add the node and the
*/
void rose_add_loopback_neigh(void)
{
- struct rose_neigh *sn = &rose_loopback_neigh;
+ struct rose_neigh *sn;
+
+ rose_loopback_neigh = kmalloc(sizeof(struct rose_neigh), GFP_KERNEL);
+ if (!rose_loopback_neigh)
+ return;
+ sn = rose_loopback_neigh;
sn->callsign = null_ax25_address;
sn->digipeat = NULL;
rose_node->mask = 10;
rose_node->count = 1;
rose_node->loopback = 1;
- rose_node->neighbour[0] = &rose_loopback_neigh;
+ rose_node->neighbour[0] = rose_loopback_neigh;
/* Insert at the head of list. Address is always mask=10 */
rose_node->next = rose_node_list;
rose_node_list = rose_node;
- rose_loopback_neigh.count++;
+ rose_loopback_neigh->count++;
out:
spin_unlock_bh(&rose_node_list_lock);
rose_remove_node(rose_node);
- rose_loopback_neigh.count--;
+ rose_loopback_neigh->count--;
out:
spin_unlock_bh(&rose_node_list_lock);
#ifdef CONFIG_NET_CLS_IND
if (tb[TCA_U32_INDEV-1]) {
- int err = tcf_change_indev(tp, n->indev, tb[TCA_U32_INDEV-1]);
+ err = tcf_change_indev(tp, n->indev, tb[TCA_U32_INDEV-1]);
if (err < 0)
goto errout;
}
#include <linux/init.h>
#include <linux/ipv6.h>
#include <linux/skbuff.h>
+#include <linux/jhash.h>
#include <net/ip.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
/* Variables */
struct timer_list perturb_timer;
- int perturbation;
+ u32 perturbation;
sfq_index tail; /* Index of current slot in round */
sfq_index max_depth; /* Maximal depth */
static __inline__ unsigned sfq_fold_hash(struct sfq_sched_data *q, u32 h, u32 h1)
{
- int pert = q->perturbation;
-
- /* Have we any rotation primitives? If not, WHY? */
- h ^= (h1<<pert) ^ (h1>>(0x1F - pert));
- h ^= h>>10;
- return h & 0x3FF;
+ return jhash_2words(h, h1, q->perturbation) & (SFQ_HASH_DIVISOR - 1);
}
static unsigned sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb)
q->ht[hash] = x = q->dep[SFQ_DEPTH].next;
q->hash[x] = hash;
}
+ /* If selected queue has length q->limit, this means that
+ * all another queues are empty and that we do simple tail drop,
+ * i.e. drop _this_ packet.
+ */
+ if (q->qs[x].qlen >= q->limit)
+ return qdisc_drop(skb, sch);
+
sch->qstats.backlog += skb->len;
__skb_queue_tail(&q->qs[x], skb);
sfq_inc(q, x);
}
sch->qstats.backlog += skb->len;
__skb_queue_head(&q->qs[x], skb);
+ /* If selected queue has length q->limit+1, this means that
+ * all another queues are empty and we do simple tail drop.
+ * This packet is still requeued at head of queue, tail packet
+ * is dropped.
+ */
+ if (q->qs[x].qlen > q->limit) {
+ skb = q->qs[x].prev;
+ __skb_unlink(skb, &q->qs[x]);
+ sch->qstats.drops++;
+ sch->qstats.backlog -= skb->len;
+ kfree_skb(skb);
+ return NET_XMIT_CN;
+ }
sfq_inc(q, x);
if (q->qs[x].qlen == 1) { /* The flow is new */
if (q->tail == SFQ_DEPTH) { /* It is the first flow */
struct Qdisc *sch = (struct Qdisc*)arg;
struct sfq_sched_data *q = qdisc_priv(sch);
- q->perturbation = net_random()&0x1F;
+ get_random_bytes(&q->perturbation, 4);
- if (q->perturb_period) {
- q->perturb_timer.expires = jiffies + q->perturb_period;
- add_timer(&q->perturb_timer);
- }
+ if (q->perturb_period)
+ mod_timer(&q->perturb_timer, jiffies + q->perturb_period);
}
static int sfq_change(struct Qdisc *sch, struct rtattr *opt)
q->quantum = ctl->quantum ? : psched_mtu(sch->dev);
q->perturb_period = ctl->perturb_period*HZ;
if (ctl->limit)
- q->limit = min_t(u32, ctl->limit, SFQ_DEPTH - 2);
+ q->limit = min_t(u32, ctl->limit, SFQ_DEPTH - 1);
qlen = sch->q.qlen;
while (sch->q.qlen > q->limit)
del_timer(&q->perturb_timer);
if (q->perturb_period) {
- q->perturb_timer.expires = jiffies + q->perturb_period;
- add_timer(&q->perturb_timer);
+ mod_timer(&q->perturb_timer, jiffies + q->perturb_period);
+ get_random_bytes(&q->perturbation, 4);
}
sch_tree_unlock(sch);
return 0;
q->dep[i+SFQ_DEPTH].next = i+SFQ_DEPTH;
q->dep[i+SFQ_DEPTH].prev = i+SFQ_DEPTH;
}
- q->limit = SFQ_DEPTH - 2;
+ q->limit = SFQ_DEPTH - 1;
q->max_depth = 0;
q->tail = SFQ_DEPTH;
if (opt == NULL) {
q->quantum = psched_mtu(sch->dev);
q->perturb_period = 0;
+ get_random_bytes(&q->perturbation, 4);
} else {
int err = sfq_change(sch, opt);
if (err)
if (pos != 0)
return -ESPIPE;
- if (iocb->ki_left == 0) /* Match SYS5 behaviour */
- return 0;
-
x = alloc_sock_iocb(iocb, &siocb);
if (!x)
return -ENOMEM;
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff