mv643xx_eth: move PHY wait defines into callers
authorLennert Buytenhek <buytenh@wantstofly.org>
Sat, 31 May 2008 23:29:14 +0000 (01:29 +0200)
committerLennert Buytenhek <buytenh@wantstofly.org>
Thu, 12 Jun 2008 06:40:27 +0000 (08:40 +0200)
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Dale Farnsworth <dale@farnsworth.org>
drivers/net/mv643xx_eth.c

index d5c9ceb..ba1348f 100644 (file)
@@ -169,9 +169,6 @@ static char mv643xx_driver_version[] = "1.0";
 #define PORT_DEFAULT_TRANSMIT_QUEUE_SIZE       800
 #define PORT_DEFAULT_RECEIVE_QUEUE_SIZE                400
 
-#define PHY_WAIT_ITERATIONS    1000    /* 1000 iterations * 10uS = 10mS max */
-#define PHY_WAIT_MICRO_SECONDS 10
-
 /* Buffer offset from buffer pointer */
 #define RX_BUF_OFFSET                          0x2
 
@@ -484,7 +481,7 @@ static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp)
                /* Wait for all Rx activity to terminate. */
                /* Check port cause register that all Rx queues are stopped */
                while (rdl(mp, RXQ_COMMAND(port_num)) & 0xFF)
-                       udelay(PHY_WAIT_MICRO_SECONDS);
+                       udelay(10);
        }
 
        return queues;
@@ -510,11 +507,11 @@ static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp)
                /* Wait for all Tx activity to terminate. */
                /* Check port cause register that all Tx queues are stopped */
                while (rdl(mp, TXQ_COMMAND(port_num)) & 0xFF)
-                       udelay(PHY_WAIT_MICRO_SECONDS);
+                       udelay(10);
 
                /* Wait for Tx FIFO to empty */
                while (rdl(mp, PORT_STATUS(port_num)) & ETH_PORT_TX_FIFO_EMPTY)
-                       udelay(PHY_WAIT_MICRO_SECONDS);
+                       udelay(10);
        }
 
        return queues;
@@ -1067,11 +1064,11 @@ static void eth_port_read_smi_reg(struct mv643xx_private *mp,
 
        /* wait for the SMI register to become available */
        for (i = 0; readl(smi_reg) & ETH_SMI_BUSY; i++) {
-               if (i == PHY_WAIT_ITERATIONS) {
+               if (i == 1000) {
                        printk("%s: PHY busy timeout\n", mp->dev->name);
                        goto out;
                }
-               udelay(PHY_WAIT_MICRO_SECONDS);
+               udelay(10);
        }
 
        writel((phy_addr << 16) | (phy_reg << 21) | ETH_SMI_OPCODE_READ,
@@ -1079,11 +1076,11 @@ static void eth_port_read_smi_reg(struct mv643xx_private *mp,
 
        /* now wait for the data to be valid */
        for (i = 0; !(readl(smi_reg) & ETH_SMI_READ_VALID); i++) {
-               if (i == PHY_WAIT_ITERATIONS) {
+               if (i == 1000) {
                        printk("%s: PHY read timeout\n", mp->dev->name);
                        goto out;
                }
-               udelay(PHY_WAIT_MICRO_SECONDS);
+               udelay(10);
        }
 
        *value = readl(smi_reg) & 0xffff;
@@ -1124,11 +1121,11 @@ static void eth_port_write_smi_reg(struct mv643xx_private *mp,
 
        /* wait for the SMI register to become available */
        for (i = 0; readl(smi_reg) & ETH_SMI_BUSY; i++) {
-               if (i == PHY_WAIT_ITERATIONS) {
+               if (i == 1000) {
                        printk("%s: PHY busy timeout\n", mp->dev->name);
                        goto out;
                }
-               udelay(PHY_WAIT_MICRO_SECONDS);
+               udelay(10);
        }
 
        writel((phy_addr << 16) | (phy_reg << 21) |