--- /dev/null
+/* saa7115 - Philips SAA7114/SAA7115 video decoder driver
+ *
+ * Based on saa7114 driver by Maxim Yevtyushkin, which is based on
+ * the saa7111 driver by Dave Perks.
+ *
+ * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
+ * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
+ *
+ * Slight changes for video timing and attachment output by
+ * Wolfgang Scherr <scherr@net4you.net>
+ *
+ * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003)
+ * by Ronald Bultje <rbultje@ronald.bitfreak.net>
+ *
+ * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com>
+ * (2/17/2003)
+ *
+ * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/i2c-compat.h>
+#include <media/v4l2-common.h>
+
+MODULE_DESCRIPTION("Philips SAA7114/SAA7115 video decoder driver");
+MODULE_AUTHOR("Maxim Yevtyushkin <max@linuxmedialabs.com>");
+MODULE_AUTHOR("Kevin Thayer <nufan_wfk@yahoo.com>");
+MODULE_AUTHOR("Chris Kennedy <c@groovy.org>");
+MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+#define saa7115_dbg(fmt,arg...) \
+ do { \
+ if (debug) \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg); \
+ } while (0)
+
+#define saa7115_err(fmt, arg...) do { \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+#define saa7115_info(fmt, arg...) do { \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
+
+static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+struct saa7115_state {
+ v4l2_std_id std;
+ int input;
+ int enable;
+ int bright;
+ int contrast;
+ int hue;
+ int sat;
+ enum v4l2_chip_ident ident;
+ enum v4l2_audio_clock_freq audclk_freq;
+};
+
+/* ----------------------------------------------------------------------- */
+
+static inline int saa7115_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int saa7115_writeregs(struct i2c_client *client, const unsigned char *regs)
+{
+ unsigned char reg, data;
+
+ while (*regs != 0x00) {
+ reg = *(regs++);
+ data = *(regs++);
+ if (saa7115_write(client, reg, data) < 0)
+ return -1;
+ }
+ return 0;
+}
+
+static inline int saa7115_read(struct i2c_client *client, u8 reg)
+{
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* If a value differs from the Hauppauge driver values, then the comment starts with
+ 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
+ Hauppauge driver sets. */
+
+static const unsigned char saa7115_init_auto_input[] = {
+ 0x01, 0x48, /* white peak control disabled */
+ 0x03, 0x20, /* was 0x30. 0x20: long vertical blanking */
+ 0x04, 0x90, /* analog gain set to 0 */
+ 0x05, 0x90, /* analog gain set to 0 */
+ 0x06, 0xeb, /* horiz sync begin = -21 */
+ 0x07, 0xe0, /* horiz sync stop = -17 */
+ 0x0a, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */
+ 0x0b, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */
+ 0x0c, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */
+ 0x0d, 0x00, /* chrominance hue control */
+ 0x0f, 0x00, /* chrominance gain control: use automicatic mode */
+ 0x10, 0x06, /* chrominance/luminance control: active adaptive combfilter */
+ 0x11, 0x00, /* delay control */
+ 0x12, 0x9d, /* RTS0 output control: VGATE */
+ 0x13, 0x80, /* X-port output control: ITU656 standard mode, RTCO output enable RTCE */
+ 0x14, 0x00, /* analog/ADC/auto compatibility control */
+ 0x18, 0x40, /* raw data gain 0x00 = nominal */
+ 0x19, 0x80, /* raw data offset 0x80 = 0 LSB */
+ 0x1a, 0x77, /* color killer level control 0x77 = recommended */
+ 0x1b, 0x42, /* misc chroma control 0x42 = recommended */
+ 0x1c, 0xa9, /* combfilter control 0xA9 = recommended */
+ 0x1d, 0x01, /* combfilter control 0x01 = recommended */
+ 0x88, 0xd0, /* reset device */
+ 0x88, 0xf0, /* set device programmed, all in operational mode */
+ 0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_reset_scaler[] = {
+ 0x87, 0x00, /* disable I-port output */
+ 0x88, 0xd0, /* reset scaler */
+ 0x88, 0xf0, /* activate scaler */
+ 0x87, 0x01, /* enable I-port output */
+ 0x00, 0x00
+};
+
+/* ============== SAA7715 VIDEO templates ============= */
+
+static const unsigned char saa7115_cfg_60hz_fullres_x[] = {
+ 0xcc, 0xd0, /* hsize low (output), hor. output window size = 0x2d0 = 720 */
+ 0xcd, 0x02, /* hsize hi (output) */
+
+ /* Why not in 60hz-Land, too? */
+ 0xd0, 0x01, /* downscale = 1 */
+ 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */
+ 0xd9, 0x04,
+ 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+ 0xdd, 0x02, /* H-scaling incr chroma */
+
+ 0x00, 0x00
+};
+static const unsigned char saa7115_cfg_60hz_fullres_y[] = {
+ 0xce, 0xf8, /* vsize low (output), ver. output window size = 248 (but 60hz is 240?) */
+ 0xcf, 0x00, /* vsize hi (output) */
+
+ /* Why not in 60hz-Land, too? */
+ 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */
+ 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */
+
+ 0xe0, 0x00, /* V-scaling incr luma low */
+ 0xe1, 0x04, /* " hi */
+ 0xe2, 0x00, /* V-scaling incr chroma low */
+ 0xe3, 0x04, /* " hi */
+
+ 0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_60hz_video[] = {
+ 0x80, 0x00, /* reset tasks */
+ 0x88, 0xd0, /* reset scaler */
+
+ 0x15, 0x03, /* VGATE pulse start */
+ 0x16, 0x11, /* VGATE pulse stop */
+ 0x17, 0x9c, /* VGATE MSB and other values */
+
+ 0x08, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */
+ 0x0e, 0x07, /* lots of different stuff... video autodetection is on */
+
+ 0x5a, 0x06, /* Vertical offset, standard 60hz value for ITU656 line counting */
+
+ /* Task A */
+ 0x90, 0x80, /* Task Handling Control */
+ 0x91, 0x48, /* X-port formats/config */
+ 0x92, 0x40, /* Input Ref. signal Def. */
+ 0x93, 0x84, /* I-port config */
+ 0x94, 0x01, /* hoffset low (input), 0x0002 is minimum */
+ 0x95, 0x00, /* hoffset hi (input) */
+ 0x96, 0xd0, /* hsize low (input), 0x02d0 = 720 */
+ 0x97, 0x02, /* hsize hi (input) */
+ 0x98, 0x05, /* voffset low (input) */
+ 0x99, 0x00, /* voffset hi (input) */
+ 0x9a, 0x0c, /* vsize low (input), 0x0c = 12 */
+ 0x9b, 0x00, /* vsize hi (input) */
+ 0x9c, 0xa0, /* hsize low (output), 0x05a0 = 1440 */
+ 0x9d, 0x05, /* hsize hi (output) */
+ 0x9e, 0x0c, /* vsize low (output), 0x0c = 12 */
+ 0x9f, 0x00, /* vsize hi (output) */
+
+ /* Task B */
+ 0xc0, 0x00, /* Task Handling Control */
+ 0xc1, 0x08, /* X-port formats/config */
+ 0xc2, 0x00, /* Input Ref. signal Def. */
+ 0xc3, 0x80, /* I-port config */
+ 0xc4, 0x02, /* hoffset low (input), 0x0002 is minimum */
+ 0xc5, 0x00, /* hoffset hi (input) */
+ 0xc6, 0xd0, /* hsize low (input), 0x02d0 = 720 */
+ 0xc7, 0x02, /* hsize hi (input) */
+ 0xc8, 0x12, /* voffset low (input), 0x12 = 18 */
+ 0xc9, 0x00, /* voffset hi (input) */
+ 0xca, 0xf8, /* vsize low (input), 0xf8 = 248 */
+ 0xcb, 0x00, /* vsize hi (input) */
+ 0xcc, 0xd0, /* hsize low (output), 0x02d0 = 720 */
+ 0xcd, 0x02, /* hsize hi (output) */
+
+ 0xf0, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
+ 0xf1, 0x05, /* low bit with 0xF0 */
+ 0xf5, 0xad, /* Set pulse generator register */
+ 0xf6, 0x01,
+
+ 0x87, 0x00, /* Disable I-port output */
+ 0x88, 0xd0, /* reset scaler */
+ 0x80, 0x20, /* Activate only task "B", continuous mode (was 0xA0) */
+ 0x88, 0xf0, /* activate scaler */
+ 0x87, 0x01, /* Enable I-port output */
+ 0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_50hz_fullres_x[] = {
+ 0xcc, 0xd0, /* hsize low (output), 720 same as 60hz */
+ 0xcd, 0x02, /* hsize hi (output) */
+
+ 0xd0, 0x01, /* down scale = 1 */
+ 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */
+ 0xd9, 0x04,
+ 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+ 0xdd, 0x02, /* H-scaling incr chroma */
+
+ 0x00, 0x00
+};
+static const unsigned char saa7115_cfg_50hz_fullres_y[] = {
+ 0xce, 0x20, /* vsize low (output), 0x0120 = 288 */
+ 0xcf, 0x01, /* vsize hi (output) */
+
+ 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */
+ 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */
+
+ 0xe0, 0x00, /* V-scaling incr luma low */
+ 0xe1, 0x04, /* " hi */
+ 0xe2, 0x00, /* V-scaling incr chroma low */
+ 0xe3, 0x04, /* " hi */
+
+ 0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_50hz_video[] = {
+ 0x80, 0x00, /* reset tasks */
+ 0x88, 0xd0, /* reset scaler */
+
+ 0x15, 0x37, /* VGATE start */
+ 0x16, 0x16, /* VGATE stop */
+ 0x17, 0x99, /* VGATE MSB and other values */
+
+ 0x08, 0x28, /* 0x28 = PAL */
+ 0x0e, 0x07, /* chrominance control 1 */
+
+ 0x5a, 0x03, /* Vertical offset, standard 50hz value */
+
+ /* Task A */
+ 0x90, 0x81, /* Task Handling Control */
+ 0x91, 0x48, /* X-port formats/config */
+ 0x92, 0x40, /* Input Ref. signal Def. */
+ 0x93, 0x84, /* I-port config */
+ /* This is weird: the datasheet says that you should use 2 as the minimum value, */
+ /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
+ 0x94, 0x00, /* hoffset low (input), 0x0002 is minimum */
+ 0x95, 0x00, /* hoffset hi (input) */
+ 0x96, 0xd0, /* hsize low (input), 0x02d0 = 720 */
+ 0x97, 0x02, /* hsize hi (input) */
+ 0x98, 0x03, /* voffset low (input) */
+ 0x99, 0x00, /* voffset hi (input) */
+ 0x9a, 0x12, /* vsize low (input), 0x12 = 18 */
+ 0x9b, 0x00, /* vsize hi (input) */
+ 0x9c, 0xa0, /* hsize low (output), 0x05a0 = 1440 */
+ 0x9d, 0x05, /* hsize hi (output) */
+ 0x9e, 0x12, /* vsize low (output), 0x12 = 18 */
+ 0x9f, 0x00, /* vsize hi (output) */
+
+ /* Task B */
+ 0xc0, 0x00, /* Task Handling Control */
+ 0xc1, 0x08, /* X-port formats/config */
+ 0xc2, 0x00, /* Input Ref. signal Def. */
+ 0xc3, 0x80, /* I-port config */
+ 0xc4, 0x00, /* hoffset low (input), 0x0002 is minimum. See comment at 0x94 above. */
+ 0xc5, 0x00, /* hoffset hi (input) */
+ 0xc6, 0xd0, /* hsize low (input), 0x02d0 = 720 */
+ 0xc7, 0x02, /* hsize hi (input) */
+ 0xc8, 0x16, /* voffset low (input), 0x16 = 22 */
+ 0xc9, 0x00, /* voffset hi (input) */
+ 0xca, 0x20, /* vsize low (input), 0x0120 = 288 */
+ 0xcb, 0x01, /* vsize hi (input) */
+ 0xcc, 0xd0, /* hsize low (output), 0x02d0 = 720 */
+ 0xcd, 0x02, /* hsize hi (output) */
+ 0xce, 0x20, /* vsize low (output), 0x0120 = 288 */
+ 0xcf, 0x01, /* vsize hi (output) */
+
+ 0xf0, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
+ 0xf1, 0x05, /* low bit with 0xF0, (was 0x05) */
+ 0xf5, 0xb0, /* Set pulse generator register */
+ 0xf6, 0x01,
+
+ 0x87, 0x00, /* Disable I-port output */
+ 0x88, 0xd0, /* reset scaler (was 0xD0) */
+ 0x80, 0x20, /* Activate only task "B" */
+ 0x88, 0xf0, /* activate scaler */
+ 0x87, 0x01, /* Enable I-port output */
+ 0x00, 0x00
+};
+
+/* ============== SAA7715 VIDEO templates (end) ======= */
+
+static const unsigned char saa7115_cfg_vbi_on[] = {
+ 0x80, 0x00, /* reset tasks */
+ 0x88, 0xd0, /* reset scaler */
+ 0x80, 0x30, /* Activate both tasks */
+ 0x88, 0xf0, /* activate scaler */
+ 0x87, 0x01, /* Enable I-port output */
+ 0x00, 0x00
+};
+
+static const unsigned char saa7115_cfg_vbi_off[] = {
+ 0x80, 0x00, /* reset tasks */
+ 0x88, 0xd0, /* reset scaler */
+ 0x80, 0x20, /* Activate only task "B" */
+ 0x88, 0xf0, /* activate scaler */
+ 0x87, 0x01, /* Enable I-port output */
+ 0x00, 0x00
+};
+
+static const unsigned char saa7115_init_misc[] = {
+ 0x38, 0x03, /* audio stuff */
+ 0x39, 0x10,
+ 0x3a, 0x08,
+
+ 0x81, 0x01, /* reg 0x15,0x16 define blanking window */
+ 0x82, 0x00,
+ 0x83, 0x01, /* I port settings */
+ 0x84, 0x20,
+ 0x85, 0x21,
+ 0x86, 0xc5,
+ 0x87, 0x01,
+
+ /* Task A */
+ 0xa0, 0x01, /* down scale = 1 */
+ 0xa1, 0x00, /* prescale accumulation length = 1 */
+ 0xa2, 0x00, /* dc gain and fir prefilter control */
+ 0xa4, 0x80, /* Lum Brightness, nominal value = 0x80 */
+ 0xa5, 0x40, /* Lum contrast, nominal value = 0x40 */
+ 0xa6, 0x40, /* Chroma satur. nominal value = 0x80 */
+ 0xa8, 0x00, /* hor lum scaling 0x0200 = 2 zoom */
+ 0xa9, 0x02, /* note: 2 x zoom ensures that VBI lines have same length as video lines. */
+ 0xaa, 0x00, /* H-phase offset Luma = 0 */
+ 0xac, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+ 0xad, 0x01, /* H-scaling incr chroma */
+ 0xae, 0x00, /* H-phase offset chroma. must be offset luma / 2 */
+
+ 0xb0, 0x00, /* V-scaling incr luma low */
+ 0xb1, 0x04, /* " hi */
+ 0xb2, 0x00, /* V-scaling incr chroma low */
+ 0xb3, 0x04, /* " hi */
+ 0xb4, 0x01, /* V-scaling mode control */
+ 0xb8, 0x00, /* V-phase offset chroma 00 */
+ 0xb9, 0x00, /* V-phase offset chroma 01 */
+ 0xba, 0x00, /* V-phase offset chroma 10 */
+ 0xbb, 0x00, /* V-phase offset chroma 11 */
+ 0xbc, 0x00, /* V-phase offset luma 00 */
+ 0xbd, 0x00, /* V-phase offset luma 01 */
+ 0xbe, 0x00, /* V-phase offset luma 10 */
+ 0xbf, 0x00, /* V-phase offset luma 11 */
+
+ /* Task B */
+ 0xd0, 0x01, /* down scale = 1 */
+ 0xd1, 0x00, /* prescale accumulation length = 1 */
+ 0xd2, 0x00, /* dc gain and fir prefilter control */
+ 0xd4, 0x80, /* Lum Brightness, nominal value = 0x80 */
+ 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */
+ 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */
+ 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */
+ 0xd9, 0x04,
+ 0xda, 0x00, /* H-phase offset Luma = 0 */
+ 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
+ 0xdd, 0x02, /* H-scaling incr chroma */
+ 0xde, 0x00, /* H-phase offset chroma. must be offset luma / 2 */
+
+ 0xe0, 0x00, /* V-scaling incr luma low */
+ 0xe1, 0x04, /* " hi */
+ 0xe2, 0x00, /* V-scaling incr chroma low */
+ 0xe3, 0x04, /* " hi */
+ 0xe4, 0x01, /* V-scaling mode control */
+ 0xe8, 0x00, /* V-phase offset chroma 00 */
+ 0xe9, 0x00, /* V-phase offset chroma 01 */
+ 0xea, 0x00, /* V-phase offset chroma 10 */
+ 0xeb, 0x00, /* V-phase offset chroma 11 */
+ 0xec, 0x00, /* V-phase offset luma 00 */
+ 0xed, 0x00, /* V-phase offset luma 01 */
+ 0xee, 0x00, /* V-phase offset luma 10 */
+ 0xef, 0x00, /* V-phase offset luma 11 */
+
+ 0xf2, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */
+ 0xf3, 0x46,
+ 0xf4, 0x00,
+ 0xf7, 0x4b, /* not the recommended settings! */
+ 0xf8, 0x00,
+ 0xf9, 0x4b,
+ 0xfa, 0x00,
+ 0xfb, 0x4b,
+ 0xff, 0x88, /* PLL2 lock detection settings: 71 lines 50% phase error */
+
+ /* Turn off VBI */
+ 0x40, 0x20, /* No framing code errors allowed. */
+ 0x41, 0xff,
+ 0x42, 0xff,
+ 0x43, 0xff,
+ 0x44, 0xff,
+ 0x45, 0xff,
+ 0x46, 0xff,
+ 0x47, 0xff,
+ 0x48, 0xff,
+ 0x49, 0xff,
+ 0x4a, 0xff,
+ 0x4b, 0xff,
+ 0x4c, 0xff,
+ 0x4d, 0xff,
+ 0x4e, 0xff,
+ 0x4f, 0xff,
+ 0x50, 0xff,
+ 0x51, 0xff,
+ 0x52, 0xff,
+ 0x53, 0xff,
+ 0x54, 0xff,
+ 0x55, 0xff,
+ 0x56, 0xff,
+ 0x57, 0xff,
+ 0x58, 0x40,
+ 0x59, 0x47,
+ 0x5b, 0x83,
+ 0x5d, 0xbd,
+ 0x5e, 0x35,
+
+ 0x02, 0x84, /* input tuner -> input 4, amplifier active */
+ 0x09, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */
+
+ 0x80, 0x20, /* enable task B */
+ 0x88, 0xd0,
+ 0x88, 0xf0,
+ 0x00, 0x00
+};
+
+/* ============== SAA7715 AUDIO settings ============= */
+
+/* 48.0 kHz */
+static const unsigned char saa7115_cfg_48_audio[] = {
+ 0x34, 0xce,
+ 0x35, 0xfb,
+ 0x36, 0x30,
+ 0x00, 0x00
+};
+
+/* 44.1 kHz */
+static const unsigned char saa7115_cfg_441_audio[] = {
+ 0x34, 0xf2,
+ 0x35, 0x00,
+ 0x36, 0x2d,
+ 0x00, 0x00
+};
+
+/* 32.0 kHz */
+static const unsigned char saa7115_cfg_32_audio[] = {
+ 0x34, 0xdf,
+ 0x35, 0xa7,
+ 0x36, 0x20,
+ 0x00, 0x00
+};
+
+/* 48.0 kHz 60hz */
+static const unsigned char saa7115_cfg_60hz_48_audio[] = {
+ 0x30, 0xcd,
+ 0x31, 0x20,
+ 0x32, 0x03,
+ 0x00, 0x00
+};
+
+/* 48.0 kHz 50hz */
+static const unsigned char saa7115_cfg_50hz_48_audio[] = {
+ 0x30, 0x00,
+ 0x31, 0xc0,
+ 0x32, 0x03,
+ 0x00, 0x00
+};
+
+/* 44.1 kHz 60hz */
+static const unsigned char saa7115_cfg_60hz_441_audio[] = {
+ 0x30, 0xbc,
+ 0x31, 0xdf,
+ 0x32, 0x02,
+ 0x00, 0x00
+};
+
+/* 44.1 kHz 50hz */
+static const unsigned char saa7115_cfg_50hz_441_audio[] = {
+ 0x30, 0x00,
+ 0x31, 0x72,
+ 0x32, 0x03,
+ 0x00, 0x00
+};
+
+/* 32.0 kHz 60hz */
+static const unsigned char saa7115_cfg_60hz_32_audio[] = {
+ 0x30, 0xde,
+ 0x31, 0x15,
+ 0x32, 0x02,
+ 0x00, 0x00
+};
+
+/* 32.0 kHz 50hz */
+static const unsigned char saa7115_cfg_50hz_32_audio[] = {
+ 0x30, 0x00,
+ 0x31, 0x80,
+ 0x32, 0x02,
+ 0x00, 0x00
+};
+
+static int saa7115_odd_parity(u8 c)
+{
+ c ^= (c >> 4);
+ c ^= (c >> 2);
+ c ^= (c >> 1);
+
+ return c & 1;
+}
+
+static int saa7115_decode_vps(u8 * dst, u8 * p)
+{
+ static const u8 biphase_tbl[] = {
+ 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+ 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+ 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+ 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+ 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+ 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+ 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+ 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+ 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+ 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+ 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
+ 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
+ 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
+ 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
+ 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
+ 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
+ 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+ 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+ 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
+ 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
+ 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
+ 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
+ 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
+ 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
+ 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+ 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+ 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
+ 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
+ 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
+ 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
+ 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
+ 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
+ };
+ int i;
+ u8 c, err = 0;
+
+ for (i = 0; i < 2 * 13; i += 2) {
+ err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
+ c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4);
+ dst[i / 2] = c;
+ }
+ return err & 0xf0;
+}
+
+static int saa7115_decode_wss(u8 * p)
+{
+ static const int wss_bits[8] = {
+ 0, 0, 0, 1, 0, 1, 1, 1
+ };
+ unsigned char parity;
+ int wss = 0;
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ int b1 = wss_bits[p[i] & 7];
+ int b2 = wss_bits[(p[i] >> 3) & 7];
+
+ if (b1 == b2)
+ return -1;
+ wss |= b2 << i;
+ }
+ parity = wss & 15;
+ parity ^= parity >> 2;
+ parity ^= parity >> 1;
+
+ if (!(parity & 1))
+ return -1;
+
+ return wss;
+}
+
+
+static int saa7115_set_audio_clock_freq(struct i2c_client *client, enum v4l2_audio_clock_freq freq)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+
+ saa7115_dbg("set audio clock freq: %d\n", freq);
+ switch (freq) {
+ case V4L2_AUDCLK_32_KHZ:
+ saa7115_writeregs(client, saa7115_cfg_32_audio);
+ if (state->std & V4L2_STD_525_60) {
+ saa7115_writeregs(client, saa7115_cfg_60hz_32_audio);
+ } else {
+ saa7115_writeregs(client, saa7115_cfg_50hz_32_audio);
+ }
+ break;
+ case V4L2_AUDCLK_441_KHZ:
+ saa7115_writeregs(client, saa7115_cfg_441_audio);
+ if (state->std & V4L2_STD_525_60) {
+ saa7115_writeregs(client, saa7115_cfg_60hz_441_audio);
+ } else {
+ saa7115_writeregs(client, saa7115_cfg_50hz_441_audio);
+ }
+ break;
+ case V4L2_AUDCLK_48_KHZ:
+ saa7115_writeregs(client, saa7115_cfg_48_audio);
+ if (state->std & V4L2_STD_525_60) {
+ saa7115_writeregs(client, saa7115_cfg_60hz_48_audio);
+ } else {
+ saa7115_writeregs(client, saa7115_cfg_50hz_48_audio);
+ }
+ break;
+ default:
+ saa7115_dbg("invalid audio setting %d\n", freq);
+ return -EINVAL;
+ }
+ state->audclk_freq = freq;
+ return 0;
+}
+
+static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ if (ctrl->value < 0 || ctrl->value > 255) {
+ saa7115_err("invalid brightness setting %d\n", ctrl->value);
+ return -ERANGE;
+ }
+
+ state->bright = ctrl->value;
+ saa7115_write(client, 0x0a, state->bright);
+ break;
+
+ case V4L2_CID_CONTRAST:
+ if (ctrl->value < 0 || ctrl->value > 127) {
+ saa7115_err("invalid contrast setting %d\n", ctrl->value);
+ return -ERANGE;
+ }
+
+ state->contrast = ctrl->value;
+ saa7115_write(client, 0x0b, state->contrast);
+ break;
+
+ case V4L2_CID_SATURATION:
+ if (ctrl->value < 0 || ctrl->value > 127) {
+ saa7115_err("invalid saturation setting %d\n", ctrl->value);
+ return -ERANGE;
+ }
+
+ state->sat = ctrl->value;
+ saa7115_write(client, 0x0c, state->sat);
+ break;
+
+ case V4L2_CID_HUE:
+ if (ctrl->value < -127 || ctrl->value > 127) {
+ saa7115_err("invalid hue setting %d\n", ctrl->value);
+ return -ERANGE;
+ }
+
+ state->hue = ctrl->value;
+ saa7115_write(client, 0x0d, state->hue);
+ break;
+ }
+
+ return 0;
+}
+
+static int saa7115_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->value = state->bright;
+ break;
+ case V4L2_CID_CONTRAST:
+ ctrl->value = state->contrast;
+ break;
+ case V4L2_CID_SATURATION:
+ ctrl->value = state->sat;
+ break;
+ case V4L2_CID_HUE:
+ ctrl->value = state->hue;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ int taskb = saa7115_read(client, 0x80) & 0x10;
+
+ // This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
+ if (std & V4L2_STD_525_60) {
+ saa7115_dbg("decoder set standard 60 Hz\n");
+ saa7115_writeregs(client, saa7115_cfg_60hz_video);
+ } else {
+ saa7115_dbg("decoder set standard 50 Hz\n");
+ saa7115_writeregs(client, saa7115_cfg_50hz_video);
+ }
+
+ state->std = std;
+
+ /* restart task B if needed */
+ if (taskb && state->ident == V4L2_IDENT_SAA7114) {
+ saa7115_writeregs(client, saa7115_cfg_vbi_on);
+ }
+
+ /* switch audio mode too! */
+ saa7115_set_audio_clock_freq(client, state->audclk_freq);
+}
+
+static v4l2_std_id saa7115_get_v4lstd(struct i2c_client *client)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+
+ return state->std;
+}
+
+static void saa7115_log_status(struct i2c_client *client)
+{
+ static const char * const audclk_freq_strs[] = {
+ "44.1 kHz",
+ "48 kHz",
+ "32 kHz"
+ };
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ int reg1e, reg1f;
+ int signalOk;
+ int vcr;
+
+ saa7115_info("Audio frequency: %s\n", audclk_freq_strs[state->audclk_freq]);
+ if (client->name[6] == '4') {
+ /* status for the saa7114 */
+ reg1f = saa7115_read(client, 0x1f);
+ signalOk = (reg1f & 0xc1) == 0x81;
+ saa7115_info("Video signal: %s\n", signalOk ? "ok" : "bad");
+ saa7115_info("Frequency: %s\n", (reg1f & 0x20) ? "60Hz" : "50Hz");
+ return;
+ }
+
+ /* status for the saa7115 */
+ reg1e = saa7115_read(client, 0x1e);
+ reg1f = saa7115_read(client, 0x1f);
+
+ signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
+ vcr = !(reg1f & 0x10);
+
+ saa7115_info("Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
+ saa7115_info("Frequency: %s\n", (reg1f & 0x20) ? "60Hz" : "50Hz");
+
+ switch (reg1e & 0x03) {
+ case 1:
+ saa7115_info("Detected format: NTSC\n");
+ break;
+ case 2:
+ saa7115_info("Detected format: PAL\n");
+ break;
+ case 3:
+ saa7115_info("Detected format: SECAM\n");
+ break;
+ default:
+ saa7115_info("Detected format: BW/No color\n");
+ break;
+ }
+}
+
+/* setup the sliced VBI lcr registers according to the sliced VBI format */
+static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_format *fmt)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ int is_50hz = (state->std & V4L2_STD_625_50);
+ u8 lcr[24];
+ int i, x;
+
+ /* saa7114 doesn't yet support VBI */
+ if (state->ident == V4L2_IDENT_SAA7114)
+ return;
+
+ for (i = 0; i <= 23; i++)
+ lcr[i] = 0xff;
+
+ if (fmt->service_set == 0) {
+ /* raw VBI */
+ if (is_50hz)
+ for (i = 6; i <= 23; i++)
+ lcr[i] = 0xdd;
+ else
+ for (i = 10; i <= 21; i++)
+ lcr[i] = 0xdd;
+ } else {
+ /* sliced VBI */
+ /* first clear lines that cannot be captured */
+ if (is_50hz) {
+ for (i = 0; i <= 5; i++)
+ fmt->service_lines[0][i] =
+ fmt->service_lines[1][i] = 0;
+ }
+ else {
+ for (i = 0; i <= 9; i++)
+ fmt->service_lines[0][i] =
+ fmt->service_lines[1][i] = 0;
+ for (i = 22; i <= 23; i++)
+ fmt->service_lines[0][i] =
+ fmt->service_lines[1][i] = 0;
+ }
+
+ /* Now set the lcr values according to the specified service */
+ for (i = 6; i <= 23; i++) {
+ lcr[i] = 0;
+ for (x = 0; x <= 1; x++) {
+ switch (fmt->service_lines[1-x][i]) {
+ case 0:
+ lcr[i] |= 0xf << (4 * x);
+ break;
+ case V4L2_SLICED_TELETEXT_B:
+ lcr[i] |= 1 << (4 * x);
+ break;
+ case V4L2_SLICED_CAPTION_525:
+ lcr[i] |= 4 << (4 * x);
+ break;
+ case V4L2_SLICED_WSS_625:
+ lcr[i] |= 5 << (4 * x);
+ break;
+ case V4L2_SLICED_VPS:
+ lcr[i] |= 7 << (4 * x);
+ break;
+ }
+ }
+ }
+ }
+
+ /* write the lcr registers */
+ for (i = 2; i <= 23; i++) {
+ saa7115_write(client, i - 2 + 0x41, lcr[i]);
+ }
+
+ /* enable/disable raw VBI capturing */
+ saa7115_writeregs(client, fmt->service_set == 0 ? saa7115_cfg_vbi_on : saa7115_cfg_vbi_off);
+}
+
+static int saa7115_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
+{
+ static u16 lcr2vbi[] = {
+ 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */
+ 0, V4L2_SLICED_CAPTION_525, /* 4 */
+ V4L2_SLICED_WSS_625, 0, /* 5 */
+ V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */
+ 0, 0, 0, 0
+ };
+ struct v4l2_sliced_vbi_format *sliced = &fmt->fmt.sliced;
+ int i;
+
+ if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+ return -EINVAL;
+ memset(sliced, 0, sizeof(*sliced));
+ /* done if using raw VBI */
+ if (saa7115_read(client, 0x80) & 0x10)
+ return 0;
+ for (i = 2; i <= 23; i++) {
+ u8 v = saa7115_read(client, i - 2 + 0x41);
+
+ sliced->service_lines[0][i] = lcr2vbi[v >> 4];
+ sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
+ sliced->service_set |=
+ sliced->service_lines[0][i] | sliced->service_lines[1][i];
+ }
+ return 0;
+}
+
+static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ struct v4l2_pix_format *pix;
+ int HPSC, HFSC;
+ int VSCY, Vsrc;
+ int is_50hz = state->std & V4L2_STD_625_50;
+
+ if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
+ saa7115_set_lcr(client, &fmt->fmt.sliced);
+ return 0;
+ }
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ pix = &(fmt->fmt.pix);
+
+ saa7115_dbg("decoder set size\n");
+
+ /* FIXME need better bounds checking here */
+ if ((pix->width < 1) || (pix->width > 1440))
+ return -EINVAL;
+ if ((pix->height < 1) || (pix->height > 960))
+ return -EINVAL;
+
+ /* probably have a valid size, let's set it */
+ /* Set output width/height */
+ /* width */
+ saa7115_write(client, 0xcc, (u8) (pix->width & 0xff));
+ saa7115_write(client, 0xcd, (u8) ((pix->width >> 8) & 0xff));
+ /* height */
+ saa7115_write(client, 0xce, (u8) (pix->height & 0xff));
+ saa7115_write(client, 0xcf, (u8) ((pix->height >> 8) & 0xff));
+
+ /* Scaling settings */
+ /* Hprescaler is floor(inres/outres) */
+ /* FIXME hardcoding input res */
+ if (pix->width != 720) {
+ HPSC = (int)(720 / pix->width);
+ /* 0 is not allowed (div. by zero) */
+ HPSC = HPSC ? HPSC : 1;
+ HFSC = (int)((1024 * 720) / (HPSC * pix->width));
+
+ saa7115_dbg("Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
+ /* FIXME hardcodes to "Task B"
+ * write H prescaler integer */
+ saa7115_write(client, 0xd0, (u8) (HPSC & 0x3f));
+
+ /* write H fine-scaling (luminance) */
+ saa7115_write(client, 0xd8, (u8) (HFSC & 0xff));
+ saa7115_write(client, 0xd9, (u8) ((HFSC >> 8) & 0xff));
+ /* write H fine-scaling (chrominance)
+ * must be lum/2, so i'll just bitshift :) */
+ saa7115_write(client, 0xDC, (u8) ((HFSC >> 1) & 0xff));
+ saa7115_write(client, 0xDD, (u8) ((HFSC >> 9) & 0xff));
+ } else {
+ if (is_50hz) {
+ saa7115_dbg("Setting full 50hz width\n");
+ saa7115_writeregs(client, saa7115_cfg_50hz_fullres_x);
+ } else {
+ saa7115_dbg("Setting full 60hz width\n");
+ saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x);
+ }
+ }
+
+ Vsrc = is_50hz ? 576 : 480;
+
+ if (pix->height != Vsrc) {
+ VSCY = (int)((1024 * Vsrc) / pix->height);
+ saa7115_dbg("Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
+
+ /* Correct Contrast and Luminance */
+ saa7115_write(client, 0xd5, (u8) (64 * 1024 / VSCY));
+ saa7115_write(client, 0xd6, (u8) (64 * 1024 / VSCY));
+
+ /* write V fine-scaling (luminance) */
+ saa7115_write(client, 0xe0, (u8) (VSCY & 0xff));
+ saa7115_write(client, 0xe1, (u8) ((VSCY >> 8) & 0xff));
+ /* write V fine-scaling (chrominance) */
+ saa7115_write(client, 0xe2, (u8) (VSCY & 0xff));
+ saa7115_write(client, 0xe3, (u8) ((VSCY >> 8) & 0xff));
+ } else {
+ if (is_50hz) {
+ saa7115_dbg("Setting full 50Hz height\n");
+ saa7115_writeregs(client, saa7115_cfg_50hz_fullres_y);
+ } else {
+ saa7115_dbg("Setting full 60hz height\n");
+ saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y);
+ }
+ }
+
+ saa7115_writeregs(client, saa7115_cfg_reset_scaler);
+ return 0;
+}
+
+/* Decode the sliced VBI data stream as created by the saa7115.
+ The format is described in the saa7115 datasheet in Tables 25 and 26
+ and in Figure 33.
+ The current implementation uses SAV/EAV codes and not the ancillary data
+ headers. The vbi->p pointer points to the SDID byte right after the SAV
+ code. */
+static void saa7115_decode_vbi_line(struct i2c_client *client,
+ struct v4l2_decode_vbi_line *vbi)
+{
+ static const char vbi_no_data_pattern[] = {
+ 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0
+ };
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ u8 *p = vbi->p;
+ u32 wss;
+ int id1, id2; /* the ID1 and ID2 bytes from the internal header */
+
+ vbi->type = 0; /* mark result as a failure */
+ id1 = p[2];
+ id2 = p[3];
+ /* Note: the field bit is inverted for 60 Hz video */
+ if (state->std & V4L2_STD_525_60)
+ id1 ^= 0x40;
+
+ /* Skip internal header, p now points to the start of the payload */
+ p += 4;
+ vbi->p = p;
+
+ /* calculate field and line number of the VBI packet (1-23) */
+ vbi->is_second_field = ((id1 & 0x40) != 0);
+ vbi->line = (id1 & 0x3f) << 3;
+ vbi->line |= (id2 & 0x70) >> 4;
+
+ /* Obtain data type */
+ id2 &= 0xf;
+
+ /* If the VBI slicer does not detect any signal it will fill up
+ the payload buffer with 0xa0 bytes. */
+ if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern)))
+ return;
+
+ /* decode payloads */
+ switch (id2) {
+ case 1:
+ vbi->type = V4L2_SLICED_TELETEXT_B;
+ break;
+ case 4:
+ if (!saa7115_odd_parity(p[0]) || !saa7115_odd_parity(p[1]))
+ return;
+ vbi->type = V4L2_SLICED_CAPTION_525;
+ break;
+ case 5:
+ wss = saa7115_decode_wss(p);
+ if (wss == -1)
+ return;
+ p[0] = wss & 0xff;
+ p[1] = wss >> 8;
+ vbi->type = V4L2_SLICED_WSS_625;
+ break;
+ case 7:
+ if (saa7115_decode_vps(p, p) != 0)
+ return;
+ vbi->type = V4L2_SLICED_VPS;
+ break;
+ default:
+ return;
+ }
+}
+
+/* ============ SAA7115 AUDIO settings (end) ============= */
+
+static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ int *iarg = arg;
+
+ /* ioctls to allow direct access to the saa7115 registers for testing */
+ switch (cmd) {
+ case VIDIOC_S_FMT:
+ return saa7115_set_v4lfmt(client, (struct v4l2_format *)arg);
+
+ case VIDIOC_G_FMT:
+ return saa7115_get_v4lfmt(client, (struct v4l2_format *)arg);
+
+ case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+ return saa7115_set_audio_clock_freq(client, *(enum v4l2_audio_clock_freq *)arg);
+
+ case VIDIOC_G_TUNER:
+ {
+ struct v4l2_tuner *vt = arg;
+ int status;
+
+ status = saa7115_read(client, 0x1f);
+
+ saa7115_dbg("status: 0x%02x\n", status);
+ vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
+ break;
+ }
+
+ case VIDIOC_LOG_STATUS:
+ saa7115_log_status(client);
+ break;
+
+ case VIDIOC_G_CTRL:
+ return saa7115_get_v4lctrl(client, (struct v4l2_control *)arg);
+
+ case VIDIOC_S_CTRL:
+ return saa7115_set_v4lctrl(client, (struct v4l2_control *)arg);
+
+ case VIDIOC_G_STD:
+ *(v4l2_std_id *)arg = saa7115_get_v4lstd(client);
+ break;
+
+ case VIDIOC_S_STD:
+ saa7115_set_v4lstd(client, *(v4l2_std_id *)arg);
+ break;
+
+ case VIDIOC_G_INPUT:
+ *(int *)arg = state->input;
+ break;
+
+ case VIDIOC_S_INPUT:
+ saa7115_dbg("decoder set input %d\n", *iarg);
+ /* inputs from 0-9 are available */
+ if (*iarg < 0 || *iarg > 9) {
+ return -EINVAL;
+ }
+
+ if (state->input == *iarg)
+ break;
+ saa7115_dbg("now setting %s input\n",
+ *iarg >= 6 ? "S-Video" : "Composite");
+ state->input = *iarg;
+
+ /* select mode */
+ saa7115_write(client, 0x02,
+ (saa7115_read(client, 0x02) & 0xf0) |
+ state->input);
+
+ /* bypass chrominance trap for modes 6..9 */
+ saa7115_write(client, 0x09,
+ (saa7115_read(client, 0x09) & 0x7f) |
+ (state->input < 6 ? 0x0 : 0x80));
+ break;
+
+ case VIDIOC_STREAMON:
+ case VIDIOC_STREAMOFF:
+ saa7115_dbg("%s output\n",
+ (cmd == VIDIOC_STREAMON) ? "enable" : "disable");
+
+ if (state->enable != (cmd == VIDIOC_STREAMON)) {
+ state->enable = (cmd == VIDIOC_STREAMON);
+ saa7115_write(client, 0x87, state->enable);
+ }
+ break;
+
+ case VIDIOC_INT_DECODE_VBI_LINE:
+ saa7115_decode_vbi_line(client, arg);
+ break;
+
+ case VIDIOC_INT_RESET:
+ saa7115_dbg("decoder RESET\n");
+ saa7115_writeregs(client, saa7115_cfg_reset_scaler);
+ break;
+
+ case VIDIOC_INT_G_VBI_DATA:
+ {
+ struct v4l2_sliced_vbi_data *data = arg;
+
+ switch (data->id) {
+ case V4L2_SLICED_WSS_625:
+ if (saa7115_read(client, 0x6b) & 0xc0)
+ return -EIO;
+ data->data[0] = saa7115_read(client, 0x6c);
+ data->data[1] = saa7115_read(client, 0x6d);
+ return 0;
+ case V4L2_SLICED_CAPTION_525:
+ if (data->field == 0) {
+ /* CC */
+ if (saa7115_read(client, 0x66) & 0xc0)
+ return -EIO;
+ data->data[0] = saa7115_read(client, 0x67);
+ data->data[1] = saa7115_read(client, 0x68);
+ return 0;
+ }
+ /* XDS */
+ if (saa7115_read(client, 0x66) & 0x30)
+ return -EIO;
+ data->data[0] = saa7115_read(client, 0x69);
+ data->data[1] = saa7115_read(client, 0x6a);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+ break;
+ }
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ case VIDIOC_INT_G_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (reg->i2c_id != I2C_DRIVERID_SAA711X)
+ return -EINVAL;
+ reg->val = saa7115_read(client, reg->reg & 0xff);
+ break;
+ }
+
+ case VIDIOC_INT_S_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (reg->i2c_id != I2C_DRIVERID_SAA711X)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ saa7115_write(client, reg->reg & 0xff, reg->val & 0xff);
+ break;
+ }
+#endif
+
+ case VIDIOC_INT_G_CHIP_IDENT:
+ *iarg = state->ident;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_driver i2c_driver_saa7115;
+
+static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct saa7115_state *state;
+ u8 chip_id;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return 0;
+
+ client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (client == 0)
+ return -ENOMEM;
+ memset(client, 0, sizeof(struct i2c_client));
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &i2c_driver_saa7115;
+ client->flags = I2C_CLIENT_ALLOW_USE;
+ snprintf(client->name, sizeof(client->name) - 1, "saa7115");
+
+ saa7115_dbg("detecting saa7115 client on address 0x%x\n", address << 1);
+
+ saa7115_write(client, 0, 5);
+ chip_id = saa7115_read(client, 0) & 0x0f;
+ if (chip_id != 4 && chip_id != 5) {
+ saa7115_dbg("saa7115 not found\n");
+ kfree(client);
+ return 0;
+ }
+ if (chip_id == 4) {
+ snprintf(client->name, sizeof(client->name) - 1, "saa7114");
+ }
+ saa7115_info("saa711%d found @ 0x%x (%s)\n", chip_id, address << 1, adapter->name);
+
+ state = kmalloc(sizeof(struct saa7115_state), GFP_KERNEL);
+ i2c_set_clientdata(client, state);
+ if (state == NULL) {
+ kfree(client);
+ return -ENOMEM;
+ }
+ memset(state, 0, sizeof(struct saa7115_state));
+ state->std = V4L2_STD_NTSC;
+ state->input = -1;
+ state->enable = 1;
+ state->bright = 128;
+ state->contrast = 64;
+ state->hue = 0;
+ state->sat = 64;
+ state->ident = (chip_id == 4) ? V4L2_IDENT_SAA7114 : V4L2_IDENT_SAA7115;
+ state->audclk_freq = V4L2_AUDCLK_48_KHZ;
+
+ saa7115_dbg("writing init values\n");
+
+ /* init to 60hz/48khz */
+ saa7115_writeregs(client, saa7115_init_auto_input);
+ saa7115_writeregs(client, saa7115_init_misc);
+ saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x);
+ saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y);
+ saa7115_writeregs(client, saa7115_cfg_60hz_video);
+ saa7115_writeregs(client, saa7115_cfg_48_audio);
+ saa7115_writeregs(client, saa7115_cfg_60hz_48_audio);
+ saa7115_writeregs(client, saa7115_cfg_reset_scaler);
+
+ i2c_attach_client(client);
+
+ saa7115_dbg("status: (1E) 0x%02x, (1F) 0x%02x\n",
+ saa7115_read(client, 0x1e), saa7115_read(client, 0x1f));
+
+ return 0;
+}
+
+static int saa7115_probe(struct i2c_adapter *adapter)
+{
+#ifdef I2C_CLASS_TV_ANALOG
+ if (adapter->class & I2C_CLASS_TV_ANALOG)
+#else
+ if (adapter->id == I2C_HW_B_BT848)
+#endif
+ return i2c_probe(adapter, &addr_data, &saa7115_attach);
+ return 0;
+}
+
+static int saa7115_detach(struct i2c_client *client)
+{
+ struct saa7115_state *state = i2c_get_clientdata(client);
+ int err;
+
+ err = i2c_detach_client(client);
+ if (err) {
+ return err;
+ }
+
+ kfree(state);
+ kfree(client);
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver_saa7115 = {
+ .name = "saa7115",
+ .id = I2C_DRIVERID_SAA711X,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = saa7115_probe,
+ .detach_client = saa7115_detach,
+ .command = saa7115_command,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init saa7115_init_module(void)
+{
+ return i2c_add_driver(&i2c_driver_saa7115);
+}
+
+static void __exit saa7115_cleanup_module(void)
+{
+ i2c_del_driver(&i2c_driver_saa7115);
+}
+
+module_init(saa7115_init_module);
+module_exit(saa7115_cleanup_module);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff