[ALSA] Add ASUS Z71V support
authorTakashi Iwai <tiwai@suse.de>
Thu, 12 May 2005 12:31:49 +0000 (14:31 +0200)
committerJaroslav Kysela <perex@suse.cz>
Sun, 29 May 2005 08:08:33 +0000 (10:08 +0200)
Documentation,HDA Codec driver
Added the ASUS Z71V (or similar) laptop support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Documentation/sound/alsa/ALSA-Configuration.txt
sound/pci/hda/patch_realtek.c

index ef07506..d49325e 100644 (file)
@@ -636,6 +636,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
          5stack        5-jack in back, 2-jack in front
          5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
          w810          3-jack
+         z71v          3-jack (HP shared SPDIF)
 
        CMI9880
          minimal       3-jack in back
index 17c5062..c106e1f 100644 (file)
@@ -39,6 +39,7 @@ enum {
        ALC880_5ST,
        ALC880_5ST_DIG,
        ALC880_W810,
+       ALC880_Z71V,
 };
 
 struct alc_spec {
@@ -90,6 +91,11 @@ static hda_nid_t alc880_w810_dac_nids[3] = {
        0x02, 0x03, 0x04
 };
 
+static hda_nid_t alc880_z71v_dac_nids[1] = {
+       /* front only? */
+       0x02
+};
+
 static hda_nid_t alc880_adc_nids[3] = {
        /* ADC0-2 */
        0x07, 0x08, 0x09,
@@ -284,6 +290,10 @@ static struct alc_channel_mode alc880_w810_modes[1] = {
        { 6, NULL }
 };
 
+static struct alc_channel_mode alc880_z71v_modes[1] = {
+       { 2, NULL }
+};
+
 /*
  */
 static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
@@ -475,6 +485,35 @@ static snd_kcontrol_new_t alc880_w810_base_mixer[] = {
        { } /* end */
 };
 
+static snd_kcontrol_new_t alc880_z71v_mixer[] = {
+       HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+       HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+       HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+       HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+       HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+       HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+       HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
+       HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+       HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
+       HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
+       {
+               .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+               /* The multiple "Capture Source" controls confuse alsamixer
+                * So call somewhat different..
+                * FIXME: the controls appear in the "playback" view!
+                */
+               /* .name = "Capture Source", */
+               .name = "Input Source",
+               .count = 2,
+               .info = alc_mux_enum_info,
+               .get = alc_mux_enum_get,
+               .put = alc_mux_enum_put,
+       },
+       { } /* end */
+};
+
 /*
  */
 static int alc_build_controls(struct hda_codec *codec)
@@ -719,6 +758,58 @@ static struct hda_verb alc880_w810_init_verbs[] = {
        { }
 };
 
+static struct hda_verb alc880_z71v_init_verbs[] = {
+       /* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
+       {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+       /* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */
+       {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
+       /* front channel selector/amp: output 0: unmuted, max volume */
+       {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+       /* front out pin: muted, (no volume selection)  */
+       {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+       /* front out pin: NOT headphone enable, out enable, vref disabled */
+       {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+       /* headphone channel selector/amp: input 0: DAC: unmuted, (no volume selection) */
+       {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+       /* headphone channel selector/amp: input 1: capture mix: muted, (no volume selection) */
+       {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180},
+       /* headphone channel selector/amp: output 0: unmuted, max volume */
+       {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+       /* headphone out pin: muted, (no volume selection)  */
+       {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+       /* headpohne out pin: headphone enable, out enable, vref disabled */
+       {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+
+       /* Line In pin widget for input */
+       {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+       /* CD pin widget for input */
+       {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+       /* Mic1 (rear panel) pin widget for input and vref at 80% */
+       {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+       /* Mic2 (front panel) pin widget for input and vref at 80% */
+       {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+       /* unmute amp left and right */
+       {0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
+       /* set connection select to line in (default select for this ADC) */
+       {0x07, AC_VERB_SET_CONNECT_SEL, 0x02},
+
+       /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer
+        * widget(nid=0x0B) to support the input path of analog loopback
+        */
+       /* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */
+       /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/
+       /* unmute CD */
+       {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
+       /* unmute Line In */
+       {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+       /* unmute Mic 1 */
+       {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+       /* unmute Line In 2 (for PASD boards Mic 2) */
+       {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
+
+       { }
+};
+
 static int alc_init(struct hda_codec *codec)
 {
        struct alc_spec *spec = codec->spec;
@@ -993,6 +1084,9 @@ static struct hda_board_config alc880_cfg_tbl[] = {
        { .modelname = "w810", .config = ALC880_W810 },
        { .pci_vendor = 0x161f, .pci_device = 0x203d, .config = ALC880_W810 },
 
+       { .modelname = "z71v", .config = ALC880_Z71V },
+       { .pci_vendor = 0x1043, .pci_device = 0x1964, .config = ALC880_Z71V },
+
        {}
 };
 
@@ -1023,6 +1117,10 @@ static int patch_alc880(struct hda_codec *codec)
                spec->mixers[spec->num_mixers] = alc880_five_stack_mixer;
                spec->num_mixers++;
                break;
+       case ALC880_Z71V:
+               spec->mixers[spec->num_mixers] = alc880_z71v_mixer;
+               spec->num_mixers++;
+               break;
        default:
                spec->mixers[spec->num_mixers] = alc880_base_mixer;
                spec->num_mixers++;
@@ -1033,6 +1131,7 @@ static int patch_alc880(struct hda_codec *codec)
        case ALC880_3ST_DIG:
        case ALC880_5ST_DIG:
        case ALC880_W810:
+       case ALC880_Z71V:
                spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
                break;
        default:
@@ -1063,6 +1162,11 @@ static int patch_alc880(struct hda_codec *codec)
                spec->channel_mode = alc880_w810_modes;
                spec->num_channel_mode = ARRAY_SIZE(alc880_w810_modes);
                break;
+       case ALC880_Z71V:
+               spec->init_verbs = alc880_z71v_init_verbs;
+               spec->channel_mode = alc880_z71v_modes;
+               spec->num_channel_mode = ARRAY_SIZE(alc880_z71v_modes);
+               break;
        default:
                spec->init_verbs = alc880_init_verbs_three_stack;
                spec->channel_mode = alc880_threestack_modes;
@@ -1086,6 +1190,11 @@ static int patch_alc880(struct hda_codec *codec)
                spec->multiout.dac_nids = alc880_w810_dac_nids;
                // No dedicated headphone socket - it's shared with built-in speakers.
                break;
+       case ALC880_Z71V:
+               spec->multiout.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids);
+               spec->multiout.dac_nids = alc880_z71v_dac_nids;
+               spec->multiout.hp_nid = 0x03;
+               break;
        default:
                spec->multiout.num_dacs = ARRAY_SIZE(alc880_dac_nids);
                spec->multiout.dac_nids = alc880_dac_nids;