[SCSI] advansys: use memcpy instead of open-coded loop

Use memcpy to initialise eep_config instead of a loop.  For
AdvInitFrom38C1600EEP where we need to modify the default EEPROM
configuration, do it after the loop, and do it using the structure
definition, not by finding the right byte.  I think it was wrong for
big-endian machines.

Also delete some non-useful comments and prototypes.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 986c52a..19c2d19 100644 (file)
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -3168,13 +3168,6 @@ do { \
 #define QHSTA_M_SGBACKUP_ERROR      0x47       /* Scatter-Gather backup error */
 
 /*
- * Default EEPROM Configuration structure defined in a_init.c.
- */
-static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config;
-static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config;
-static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config;
-
-/*
  * DvcGetPhyAddr() flag arguments
  */
 #define ADV_IS_SCSIQ_FLAG       0x01   /* 'addr' is ASC_SCSI_REQ_Q pointer */
@@ -13183,7 +13176,6 @@ static unsigned char _adv_asc38C1600_buf[] = {
 static unsigned short _adv_asc38C1600_size = sizeof(_adv_asc38C1600_buf);      /* 0x1673 */
 static ADV_DCNT _adv_asc38C1600_chksum = 0x0604EF77UL; /* Expanded little-endian checksum. */
 
-/* a_init.c */
 /*
  * EEPROM Configuration.
  *
@@ -15443,7 +15435,6 @@ static int __devinit AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc)
        AdvPortAddr iop_base;
        ushort warn_code;
        ADVEEP_3550_CONFIG eep_config;
-       int i;
 
        iop_base = asc_dvc->iop_base;
 
@@ -15460,15 +15451,12 @@ static int __devinit AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc)
                /*
                 * Set EEPROM default values.
                 */
-               for (i = 0; i < sizeof(ADVEEP_3550_CONFIG); i++) {
-                       *((uchar *)&eep_config + i) =
-                           *((uchar *)&Default_3550_EEPROM_Config + i);
-               }
+               memcpy(&eep_config, &Default_3550_EEPROM_Config,
+                       sizeof(ADVEEP_3550_CONFIG));
 
                /*
-                * Assume the 6 byte board serial number that was read
-                * from EEPROM is correct even if the EEPROM checksum
-                * failed.
+                * Assume the 6 byte board serial number that was read from
+                * EEPROM is correct even if the EEPROM checksum failed.
                 */
                eep_config.serial_number_word3 =
                    AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
@@ -15597,7 +15585,6 @@ static int __devinit AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc)
        AdvPortAddr iop_base;
        ushort warn_code;
        ADVEEP_38C0800_CONFIG eep_config;
-       int i;
        uchar tid, termination;
        ushort sdtr_speed = 0;
 
@@ -15617,15 +15604,12 @@ static int __devinit AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc)
                /*
                 * Set EEPROM default values.
                 */
-               for (i = 0; i < sizeof(ADVEEP_38C0800_CONFIG); i++) {
-                       *((uchar *)&eep_config + i) =
-                           *((uchar *)&Default_38C0800_EEPROM_Config + i);
-               }
+               memcpy(&eep_config, &Default_38C0800_EEPROM_Config,
+                       sizeof(ADVEEP_38C0800_CONFIG));
 
                /*
-                * Assume the 6 byte board serial number that was read
-                * from EEPROM is correct even if the EEPROM checksum
-                * failed.
+                * Assume the 6 byte board serial number that was read from
+                * EEPROM is correct even if the EEPROM checksum failed.
                 */
                eep_config.serial_number_word3 =
                    AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
@@ -15800,7 +15784,6 @@ static int __devinit AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc)
        AdvPortAddr iop_base;
        ushort warn_code;
        ADVEEP_38C1600_CONFIG eep_config;
-       int i;
        uchar tid, termination;
        ushort sdtr_speed = 0;
 
@@ -15821,68 +15804,46 @@ static int __devinit AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc)
                /*
                 * Set EEPROM default values.
                 */
-               for (i = 0; i < sizeof(ADVEEP_38C1600_CONFIG); i++) {
-                       if (i == 1 && PCI_FUNC(pdev->devfn) != 0) {
-                               /*
-                                * Set Function 1 EEPROM Word 0 MSB
-                                *
-                                * Clear the BIOS_ENABLE (bit 14) and INTAB (bit 11)
-                                * EEPROM bits.
-                                *
-                                * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60 and
-                                * old Mac system booting problem. The Expansion ROM must
-                                * be disabled in Function 1 for these systems.
-                                *
-                                */
-                               *((uchar *)&eep_config + i) =
-                                   ((*
-                                     ((uchar *)&Default_38C1600_EEPROM_Config
-                                      +
-                                      i)) &
-                                    (~
-                                     (((ADV_EEPROM_BIOS_ENABLE |
-                                        ADV_EEPROM_INTAB) >> 8) & 0xFF)));
+               memcpy(&eep_config, &Default_38C1600_EEPROM_Config,
+                       sizeof(ADVEEP_38C1600_CONFIG));
 
-                               /*
-                                * Set the INTAB (bit 11) if the GPIO 0 input indicates
-                                * the Function 1 interrupt line is wired to INTA.
-                                *
-                                * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input:
-                                *   1 - Function 1 interrupt line wired to INT A.
-                                *   0 - Function 1 interrupt line wired to INT B.
-                                *
-                                * Note: Adapter boards always have Function 0 wired to INTA.
-                                * Put all 5 GPIO bits in input mode and then read
-                                * their input values.
-                                */
-                               AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL,
-                                                    0);
-                               if (AdvReadByteRegister
-                                   (iop_base, IOPB_GPIO_DATA) & 0x01) {
-                                       /* Function 1 interrupt wired to INTA; Set EEPROM bit. */
-                                       *((uchar *)&eep_config + i) |=
-                                           ((ADV_EEPROM_INTAB >> 8) & 0xFF);
-                               }
-                       } else {
-                               *((uchar *)&eep_config + i) =
-                                   *((uchar *)&Default_38C1600_EEPROM_Config
-                                     + i);
-                       }
+               if (PCI_FUNC(pdev->devfn) != 0) {
+                       u8 ints;
+                       /*
+                        * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60
+                        * and old Mac system booting problem. The Expansion
+                        * ROM must be disabled in Function 1 for these systems
+                        */
+                       eep_config.cfg_lsw &= ~ADV_EEPROM_BIOS_ENABLE;
+                       /*
+                        * Clear the INTAB (bit 11) if the GPIO 0 input
+                        * indicates the Function 1 interrupt line is wired
+                        * to INTB.
+                        *
+                        * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input:
+                        *   1 - Function 1 interrupt line wired to INT A.
+                        *   0 - Function 1 interrupt line wired to INT B.
+                        *
+                        * Note: Function 0 is always wired to INTA.
+                        * Put all 5 GPIO bits in input mode and then read
+                        * their input values.
+                        */
+                       AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL, 0);
+                       ints = AdvReadByteRegister(iop_base, IOPB_GPIO_DATA);
+                       if ((ints & 0x01) == 0)
+                               eep_config.cfg_lsw &= ~ADV_EEPROM_INTAB;
                }
 
                /*
-                * Assume the 6 byte board serial number that was read
-                * from EEPROM is correct even if the EEPROM checksum
-                * failed.
+                * Assume the 6 byte board serial number that was read from
+                * EEPROM is correct even if the EEPROM checksum failed.
                 */
                eep_config.serial_number_word3 =
-                   AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
-
+                       AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1);
                eep_config.serial_number_word2 =
-                   AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
-
+                       AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2);
                eep_config.serial_number_word1 =
-                   AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
+                       AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3);
 
                AdvSet38C1600EEPConfig(iop_base, &eep_config);
        }