tulip_core: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where appropriate
Convert printks to pr_<level>
Change print formats with %d.dx to %0dx
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index da4fc45..e1a5f03 100644 (file)
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -41,7 +41,6 @@
 static char version[] __devinitdata =
        "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
 
-
 /* A few user-configurable values. */
 
 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
@@ -326,7 +325,8 @@ static void tulip_up(struct net_device *dev)
        udelay(100);
 
        if (tulip_debug > 1)
-               printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
+               printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
+                      dev->name, dev->irq);
 
        iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
        iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
@@ -387,8 +387,9 @@ static void tulip_up(struct net_device *dev)
                        (dev->if_port == 12 ? 0 : dev->if_port);
                for (i = 0; i < tp->mtable->leafcount; i++)
                        if (tp->mtable->mleaf[i].media == looking_for) {
-                               printk(KERN_INFO "%s: Using user-specified media %s.\n",
-                                          dev->name, medianame[dev->if_port]);
+                               dev_info(&dev->dev,
+                                        "Using user-specified media %s\n",
+                                        medianame[dev->if_port]);
                                goto media_picked;
                        }
        }
@@ -396,8 +397,9 @@ static void tulip_up(struct net_device *dev)
                int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
                for (i = 0; i < tp->mtable->leafcount; i++)
                        if (tp->mtable->mleaf[i].media == looking_for) {
-                               printk(KERN_INFO "%s: Using EEPROM-set media %s.\n",
-                                          dev->name, medianame[looking_for]);
+                               dev_info(&dev->dev,
+                                        "Using EEPROM-set media %s\n",
+                                        medianame[looking_for]);
                                goto media_picked;
                        }
        }
@@ -424,9 +426,10 @@ media_picked:
                if (tp->mii_cnt) {
                        tulip_select_media(dev, 1);
                        if (tulip_debug > 1)
-                               printk(KERN_INFO "%s: Using MII transceiver %d, status "
-                                          "%4.4x.\n",
-                                          dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
+                               dev_info(&dev->dev,
+                                        "Using MII transceiver %d, status %04x\n",
+                                        tp->phys[0],
+                                        tulip_mdio_read(dev, tp->phys[0], 1));
                        iowrite32(csr6_mask_defstate, ioaddr + CSR6);
                        tp->csr6 = csr6_mask_hdcap;
                        dev->if_port = 11;
@@ -490,9 +493,10 @@ media_picked:
        iowrite32(0, ioaddr + CSR2);            /* Rx poll demand */
 
        if (tulip_debug > 2) {
-               printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
-                          dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
-                          ioread32(ioaddr + CSR6));
+               printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+                      dev->name, ioread32(ioaddr + CSR0),
+                      ioread32(ioaddr + CSR5),
+                      ioread32(ioaddr + CSR6));
        }
 
        /* Set the timer to switch to check for link beat and perhaps switch
@@ -540,27 +544,30 @@ static void tulip_tx_timeout(struct net_device *dev)
        if (tulip_media_cap[dev->if_port] & MediaIsMII) {
                /* Do nothing -- the media monitor should handle this. */
                if (tulip_debug > 1)
-                       printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
-                                  dev->name);
+                       dev_warn(&dev->dev,
+                                "Transmit timeout using MII device\n");
        } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
                   tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
                   tp->chip_id == DM910X) {
-               printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
-                          "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
-                          dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
-                          ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+               dev_warn(&dev->dev,
+                        "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
+                        ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
+                        ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
+                        ioread32(ioaddr + CSR15));
                tp->timeout_recovery = 1;
                schedule_work(&tp->media_work);
                goto out_unlock;
        } else if (tp->chip_id == PNIC2) {
-               printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
-                      "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
-                      dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
-                      (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
+               dev_warn(&dev->dev,
+                        "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
+                        (int)ioread32(ioaddr + CSR5),
+                        (int)ioread32(ioaddr + CSR6),
+                        (int)ioread32(ioaddr + CSR7),
+                        (int)ioread32(ioaddr + CSR12));
        } else {
-               printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
-                          "%8.8x, resetting...\n",
-                          dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+               dev_warn(&dev->dev,
+                        "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
+                        ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
                dev->if_port = 0;
        }
 
@@ -570,26 +577,26 @@ static void tulip_tx_timeout(struct net_device *dev)
                for (i = 0; i < RX_RING_SIZE; i++) {
                        u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
                        int j;
-                       printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x  "
-                                  "%2.2x %2.2x %2.2x.\n",
-                                  i, (unsigned int)tp->rx_ring[i].status,
-                                  (unsigned int)tp->rx_ring[i].length,
-                                  (unsigned int)tp->rx_ring[i].buffer1,
-                                  (unsigned int)tp->rx_ring[i].buffer2,
-                                  buf[0], buf[1], buf[2]);
+                       printk(KERN_DEBUG
+                              "%2d: %08x %08x %08x %08x  %02x %02x %02x\n",
+                              i,
+                              (unsigned int)tp->rx_ring[i].status,
+                              (unsigned int)tp->rx_ring[i].length,
+                              (unsigned int)tp->rx_ring[i].buffer1,
+                              (unsigned int)tp->rx_ring[i].buffer2,
+                              buf[0], buf[1], buf[2]);
                        for (j = 0; buf[j] != 0xee && j < 1600; j++)
                                if (j < 100)
-                                       printk(KERN_CONT " %2.2x", buf[j]);
-                       printk(KERN_CONT " j=%d.\n", j);
+                                       pr_cont(" %02x", buf[j]);
+                       pr_cont(" j=%d\n", j);
                }
-               printk(KERN_DEBUG "  Rx ring %8.8x: ", (int)tp->rx_ring);
+               printk(KERN_DEBUG "  Rx ring %08x: ", (int)tp->rx_ring);
                for (i = 0; i < RX_RING_SIZE; i++)
-                       printk(KERN_CONT " %8.8x",
-                              (unsigned int)tp->rx_ring[i].status);
-               printk(KERN_DEBUG "  Tx ring %8.8x: ", (int)tp->tx_ring);
+                       pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
+               printk(KERN_DEBUG "  Tx ring %08x: ", (int)tp->tx_ring);
                for (i = 0; i < TX_RING_SIZE; i++)
-                       printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
-               printk(KERN_CONT "\n");
+                       pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
+               pr_cont("\n");
        }
 #endif
 
@@ -832,8 +839,9 @@ static int tulip_close (struct net_device *dev)
        tulip_down (dev);
 
        if (tulip_debug > 1)
-               printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
-                       dev->name, ioread32 (ioaddr + CSR5));
+               dev_printk(KERN_DEBUG, &dev->dev,
+                          "Shutting down ethercard, status was %02x\n",
+                          ioread32 (ioaddr + CSR5));
 
        free_irq (dev->irq, dev);
 
@@ -1073,10 +1081,10 @@ static void set_rx_mode(struct net_device *dev)
                                filterbit &= 0x3f;
                                mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
                                if (tulip_debug > 2)
-                                       printk(KERN_INFO "%s: Added filter for %pM"
-                                              "  %8.8x bit %d.\n",
-                                              dev->name, mclist->dmi_addr,
-                                              ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
+                                       dev_info(&dev->dev,
+                                                "Added filter for %pM  %08x bit %d\n",
+                                                mclist->dmi_addr,
+                                                ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
                        }
                        if (mc_filter[0] == tp->mc_filter[0]  &&
                                mc_filter[1] == tp->mc_filter[1])
@@ -1288,9 +1296,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
        unsigned int force_csr0 = 0;
 
 #ifndef MODULE
-       static int did_version;         /* Already printed version info. */
-       if (tulip_debug > 0  &&  did_version++ == 0)
-               printk (KERN_INFO "%s", version);
+       if (tulip_debug > 0)
+               printk_once(KERN_INFO "%s", version);
 #endif
 
        board_idx++;
@@ -1301,7 +1308,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
         */
 
         if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
-               printk (KERN_ERR PFX "skipping LMC card.\n");
+               pr_err(PFX "skipping LMC card\n");
                return -ENODEV;
        }
 
@@ -1317,15 +1324,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
                if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
                    pdev->revision < 0x30) {
-                       printk(KERN_INFO PFX
-                              "skipping early DM9100 with Crc bug (use dmfe)\n");
+                       pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
                        return -ENODEV;
                }
 
                dp = pci_device_to_OF_node(pdev);
                if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
-                       printk(KERN_INFO PFX
-                              "skipping DM910x expansion card (use dmfe)\n");
+                       pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
                        return -ENODEV;
                }
        }
@@ -1372,9 +1377,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
        i = pci_enable_device(pdev);
        if (i) {
-               printk (KERN_ERR PFX
-                       "Cannot enable tulip board #%d, aborting\n",
-                       board_idx);
+               pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
+                      board_idx);
                return i;
        }
 
@@ -1383,22 +1387,22 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
        /* alloc_etherdev ensures aligned and zeroed private structures */
        dev = alloc_etherdev (sizeof (*tp));
        if (!dev) {
-               printk (KERN_ERR PFX "ether device alloc failed, aborting\n");
+               pr_err(PFX "ether device alloc failed, aborting\n");
                return -ENOMEM;
        }
 
        SET_NETDEV_DEV(dev, &pdev->dev);
        if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
-               printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, "
-                       "aborting\n", pci_name(pdev),
-                       (unsigned long long)pci_resource_len (pdev, 0),
-                       (unsigned long long)pci_resource_start (pdev, 0));
+               pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+                      pci_name(pdev),
+                      (unsigned long long)pci_resource_len (pdev, 0),
+                      (unsigned long long)pci_resource_start (pdev, 0));
                goto err_out_free_netdev;
        }
 
        /* grab all resources from both PIO and MMIO regions, as we
         * don't want anyone else messing around with our hardware */
-       if (pci_request_regions (pdev, "tulip"))
+       if (pci_request_regions (pdev, DRV_NAME))
                goto err_out_free_netdev;
 
        ioaddr =  pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
@@ -1611,8 +1615,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
        if (dev->mem_start & MEDIA_MASK)
                tp->default_port = dev->mem_start & MEDIA_MASK;
        if (tp->default_port) {
-               printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n",
-                      board_idx, medianame[tp->default_port & MEDIA_MASK]);
+               pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
+                       board_idx, medianame[tp->default_port & MEDIA_MASK]);
                tp->medialock = 1;
                if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
                        tp->full_duplex = 1;
@@ -1627,7 +1631,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
        }
 
        if (tp->flags & HAS_MEDIA_TABLE) {
-               sprintf(dev->name, "tulip%d", board_idx);       /* hack */
+               sprintf(dev->name, DRV_NAME "%d", board_idx);   /* hack */
                tulip_parse_eeprom(dev);
                strcpy(dev->name, "eth%d");                     /* un-hack */
        }
@@ -1663,20 +1667,18 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
        if (register_netdev(dev))
                goto err_out_free_ring;
 
-       printk(KERN_INFO "%s: %s rev %d at "
+       pci_set_drvdata(pdev, dev);
+
+       dev_info(&dev->dev,
 #ifdef CONFIG_TULIP_MMIO
-               "MMIO"
+                "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
 #else
-               "Port"
+                "%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
 #endif
-               " %#llx,", dev->name, chip_name, pdev->revision,
-               (unsigned long long) pci_resource_start(pdev, TULIP_BAR));
-       pci_set_drvdata(pdev, dev);
-
-       if (eeprom_missing)
-               printk(" EEPROM not present,");
-       printk(" %pM", dev->dev_addr);
-       printk(", IRQ %d.\n", irq);
+                chip_name, pdev->revision,
+                (unsigned long long)pci_resource_start(pdev, TULIP_BAR),
+                eeprom_missing ? " EEPROM not present," : "",
+                dev->dev_addr, irq);
 
         if (tp->chip_id == PNIC2)
                tp->link_change = pnic2_lnk_change;
@@ -1799,12 +1801,12 @@ static int tulip_resume(struct pci_dev *pdev)
                return 0;
 
        if ((retval = pci_enable_device(pdev))) {
-               printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
+               pr_err(PFX "pci_enable_device failed in resume\n");
                return retval;
        }
 
        if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
-               printk (KERN_ERR "tulip: request_irq failed in resume\n");
+               pr_err(PFX "request_irq failed in resume\n");
                return retval;
        }
 
@@ -1874,7 +1876,7 @@ static struct pci_driver tulip_driver = {
 static int __init tulip_init (void)
 {
 #ifdef MODULE
-       printk (KERN_INFO "%s", version);
+       pr_info("%s", version);
 #endif
 
        /* copy module parms into globals */