[SCSI] scsi_debug: fix lba and data length calculation bugs

For example, `modprobe scsi_debug virtual_gb=1100` gives:

scsi7 : scsi_debug, version 1.81 [20070104], dev_size_mb=8, opts=0x0
scsi 7:0:0:0: Direct-Access     Linux    scsi_debug       0004 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdc] 2306867200 512-byte hardware sectors (1181116 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 73 00 10 08
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 7:0:0:0: [sdc] 2306867200 512-byte hardware sectors (1181116 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 73 00 10 08
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdc: unknown partition table
sd 7:0:0:0: [sdc] Attached SCSI disk
sd 7:0:0:0: Attached scsi generic sg6 type 0
end_request: I/O error, dev sdc, sector 2306867072
Buffer I/O error on device sdc, logical block 288358384
end_request: I/O error, dev sdc, sector 2306867072
Buffer I/O error on device sdc, logical block 288358384
end_request: I/O error, dev sdc, sector 2306867192

(snip)

Note that this converts all the calculations (including the correct
calculations) for unification.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 5f348e7..65c88dd 100644 (file)
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -252,33 +252,37 @@ static struct bus_type pseudo_lld_bus;
 static void get_data_transfer_info(unsigned char *cmd,
                                   unsigned long long *lba, unsigned int *num)
 {
-       int i;
-
        switch (*cmd) {
        case WRITE_16:
        case READ_16:
-               for (*lba = 0, i = 0; i < 8; ++i) {
-                       if (i > 0)
-                               *lba <<= 8;
-                       *lba += cmd[2 + i];
-               }
-               *num = cmd[13] + (cmd[12] << 8) +
-                       (cmd[11] << 16) + (cmd[10] << 24);
+               *lba = (u64)cmd[9] | (u64)cmd[8] << 8 |
+                       (u64)cmd[7] << 16 | (u64)cmd[6] << 24 |
+                       (u64)cmd[5] << 32 | (u64)cmd[4] << 40 |
+                       (u64)cmd[3] << 48 | (u64)cmd[2] << 56;
+
+               *num = (u32)cmd[13] | (u32)cmd[12] << 8 | (u32)cmd[11] << 16 |
+                       (u32)cmd[10] << 24;
                break;
        case WRITE_12:
        case READ_12:
-               *lba = cmd[5] + (cmd[4] << 8) + (cmd[3] << 16) + (cmd[2] << 24);
-               *num = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
+               *lba = (u32)cmd[5] | (u32)cmd[4] << 8 | (u32)cmd[3] << 16 |
+                       (u32)cmd[2] << 24;
+
+               *num = (u32)cmd[9] | (u32)cmd[8] << 8 | (u32)cmd[7] << 16 |
+                       (u32)cmd[6] << 24;
                break;
        case WRITE_10:
        case READ_10:
        case XDWRITEREAD_10:
-               *lba = cmd[5] + (cmd[4] << 8) + (cmd[3] << 16) + (cmd[2] << 24);
-               *num = cmd[8] + (cmd[7] << 8);
+               *lba = (u32)cmd[5] | (u32)cmd[4] << 8 | (u32)cmd[3] << 16 |
+                       (u32)cmd[2] << 24;
+
+               *num = (u32)cmd[8] | (u32)cmd[7] << 8;
                break;
        case WRITE_6:
        case READ_6:
-               *lba = cmd[3] + (cmd[2] << 8) + ((cmd[1] & 0x1f) << 16);
+               *lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
+                       (u32)(cmd[1] & 0x1f) << 16;
                *num = (0 == cmd[4]) ? 256 : cmd[4];
                break;
        default: