USB: OHCI avoids root hub timer polling
authorDavid Brownell <david-b@pacbell.net>
Fri, 4 Aug 2006 18:31:55 +0000 (11:31 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 27 Sep 2006 18:58:48 +0000 (11:58 -0700)
This teaches OHCI to use the root hub status change (RHSC) IRQ, bypassing
root hub timers most of the time and switching over to the "new" root hub
polling scheme.  It's complicated by the fact that implementations of OHCI
trigger and ack that IRQ differently (the spec is vague there).

Avoiding root hub timers helps mechanisms like "dynamic tick" leave the
CPU in lowpower modes for longer intervals.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 files changed:
drivers/usb/host/ohci-at91.c
drivers/usb/host/ohci-au1xxx.c
drivers/usb/host/ohci-dbg.c
drivers/usb/host/ohci-ep93xx.c
drivers/usb/host/ohci-hcd.c
drivers/usb/host/ohci-hub.c
drivers/usb/host/ohci-lh7a404.c
drivers/usb/host/ohci-omap.c
drivers/usb/host/ohci-pci.c
drivers/usb/host/ohci-ppc-soc.c
drivers/usb/host/ohci-pxa27x.c
drivers/usb/host/ohci-s3c2410.c
drivers/usb/host/ohci-sa1111.c

index 85cc059..33b7508 100644 (file)
@@ -239,7 +239,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
-
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index f7a975d..44ed3a4 100644 (file)
@@ -268,10 +268,6 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
         * basic lifecycle operations
         */
        .start =                ohci_au1xxx_start,
-#ifdef CONFIG_PM
-       /* suspend:             ohci_au1xxx_suspend,  -- tbd */
-       /* resume:              ohci_au1xxx_resume,   -- tbd */
-#endif /*CONFIG_PM*/
        .stop =                 ohci_stop,
 
        /*
@@ -291,6 +287,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index 7bfffcb..da52609 100644 (file)
@@ -667,6 +667,11 @@ show_registers (struct class_device *class_dev, char *buf)
        size -= temp;
        next += temp;
 
+       temp = scnprintf (next, size, "hub poll timer %s\n",
+                       ohci_to_hcd(ohci)->poll_rh ? "ON" : "off");
+       size -= temp;
+       next += temp;
+
        /* roothub */
        ohci_dump_roothub (ohci, 1, &next, &size);
 
index 6531c4d..1a1d320 100644 (file)
@@ -134,6 +134,7 @@ static struct hc_driver ohci_ep93xx_hc_driver = {
        .get_frame_number       = ohci_get_frame,
        .hub_status_data        = ohci_hub_status_data,
        .hub_control            = ohci_hub_control,
+       .hub_irq_enable         = ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend            = ohci_bus_suspend,
        .bus_resume             = ohci_bus_resume,
index 94d8cf4..0684f57 100644 (file)
 
 #include "../core/hcd.h"
 
-#define DRIVER_VERSION "2005 April 22"
+#define DRIVER_VERSION "2006 August 04"
 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
 
 #undef OHCI_VERBOSE_DEBUG      /* not always helpful */
 
 /* For initializing controller (mask in an HCFS mode too) */
-#define        OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
+#define        OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
 #define        OHCI_INTR_INIT \
-       (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
+               (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
+               | OHCI_INTR_RD | OHCI_INTR_WDH)
 
 #ifdef __hppa__
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 
 static const char      hcd_name [] = "ohci_hcd";
 
+#define        STATECHANGE_DELAY       msecs_to_jiffies(300)
+
 #include "ohci.h"
 
 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
@@ -446,7 +449,6 @@ static int ohci_init (struct ohci_hcd *ohci)
 
        disable (ohci);
        ohci->regs = hcd->regs;
-       ohci->next_statechange = jiffies;
 
        /* REVISIT this BIOS handshake is now moved into PCI "quirks", and
         * was never needed for most non-PCI systems ... remove the code?
@@ -637,10 +639,14 @@ retry:
                return -EOVERFLOW;
        }
 
-       /* start controller operations */
+       /* use rhsc irqs after khubd is fully initialized */
+       hcd->poll_rh = 1;
+       hcd->uses_new_polling = 1;
+
+       /* start controller operations */
        ohci->hc_control &= OHCI_CTRL_RWC;
-       ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
-       ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+       ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+       ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
        hcd->state = HC_STATE_RUNNING;
 
        /* wake on ConnectStatusChange, matching external hubs */
@@ -648,7 +654,7 @@ retry:
 
        /* Choose the interrupts we care about now, others later on demand */
        mask = OHCI_INTR_INIT;
-       ohci_writel (ohci, mask, &ohci->regs->intrstatus);
+       ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
        ohci_writel (ohci, mask, &ohci->regs->intrenable);
 
        /* handle root hub init quirks ... */
@@ -672,6 +678,7 @@ retry:
        // flush those writes
        (void) ohci_readl (ohci, &ohci->regs->control);
 
+       ohci->next_statechange = jiffies + STATECHANGE_DELAY;
        spin_unlock_irq (&ohci->lock);
 
        // POTPGT delay is bits 24-31, in 2 ms units.
@@ -709,7 +716,23 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
        /* interrupt for some other device? */
        } else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
                return IRQ_NOTMINE;
-       } 
+       }
+
+       /* NOTE:  vendors didn't always make the same implementation
+        * choices for RHSC.  Sometimes it triggers on an edge (like
+        * setting and maybe clearing a port status change bit); and
+        * it's level-triggered on other silicon, active until khubd
+        * clears all active port status change bits.  Poll by timer
+        * til it's fully debounced and the difference won't matter.
+        */
+       if (ints & OHCI_INTR_RHSC) {
+               ohci_vdbg (ohci, "rhsc\n");
+               ohci_writel (ohci, OHCI_INTR_RHSC, &regs->intrdisable);
+               hcd->poll_rh = 1;
+               ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+               ohci_writel (ohci, OHCI_INTR_RHSC, &regs->intrstatus);
+               usb_hcd_poll_rh_status(hcd);
+       }
 
        if (ints & OHCI_INTR_UE) {
                disable (ohci);
index 5b0a23f..f1b1ed0 100644 (file)
 
 /*-------------------------------------------------------------------------*/
 
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+       struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
+
+       ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+}
+
 #ifdef CONFIG_PM
 
 #define OHCI_SCHED_ENABLES \
@@ -123,6 +131,9 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
        /* no resumes until devices finish suspending */
        ohci->next_statechange = jiffies + msecs_to_jiffies (5);
 
+       /* no timer polling */
+       hcd->poll_rh = 0;
+
 done:
        /* external suspend vs self autosuspend ... same effect */
        if (status == 0)
@@ -256,8 +267,8 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
        /* TRSMRCY */
        msleep (10);
 
-       /* keep it alive for ~5x suspend + resume costs */
-       ohci->next_statechange = jiffies + msecs_to_jiffies (250);
+       /* keep it alive for more than ~5x suspend + resume costs */
+       ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 
        /* maybe turn schedules back on */
        enables = 0;
@@ -302,9 +313,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
        int             i, changed = 0, length = 1;
-       int             can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
+       int             can_suspend;
        unsigned long   flags;
 
+       can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
        spin_lock_irqsave (&ohci->lock, flags);
 
        /* handle autosuspended root:  finish resuming before
@@ -339,6 +351,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
        for (i = 0; i < ohci->num_ports; i++) {
                u32     status = roothub_portstatus (ohci, i);
 
+               /* can't autosuspend with active ports */
+               if ((status & RH_PS_PES) && !(status & RH_PS_PSS))
+                       can_suspend = 0;
+
                if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
                                | RH_PS_OCIC | RH_PS_PRSC)) {
                        changed = 1;
@@ -348,32 +364,41 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
                            buf [1] |= 1 << (i - 7);
                        continue;
                }
+       }
 
-               /* can suspend if no ports are enabled; or if all all
-                * enabled ports are suspended AND remote wakeup is on.
-                */
-               if (!(status & RH_PS_CCS))
-                       continue;
-               if ((status & RH_PS_PSS) && can_suspend)
-                       continue;
+       /* after root hub changes, stop polling after debouncing
+        * for a while and maybe kicking in autosuspend
+        */
+       if (changed) {
+               ohci->next_statechange = jiffies + STATECHANGE_DELAY;
                can_suspend = 0;
+       } else if (time_before (jiffies, ohci->next_statechange)) {
+               can_suspend = 0;
+       } else {
+#ifdef CONFIG_PM
+               can_suspend = can_suspend
+                       && !ohci->ed_rm_list
+                       && ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
+                                       & ohci->hc_control)
+                               == OHCI_USB_OPER;
+#endif
+               if (hcd->uses_new_polling) {
+                       hcd->poll_rh = 0;
+                       /* use INTR_RHSC iff INTR_RD won't apply */
+                       if (!can_suspend)
+                               ohci_writel (ohci, OHCI_INTR_RHSC,
+                                               &ohci->regs->intrenable);
+               }
        }
+
 done:
        spin_unlock_irqrestore (&ohci->lock, flags);
 
-#ifdef CONFIG_PM
-       /* save power by suspending idle root hubs;
+#ifdef CONFIG_PM
+       /* save power by autosuspending idle root hubs;
         * INTR_RD wakes us when there's work
         */
-       if (can_suspend
-                       && !changed
-                       && !ohci->ed_rm_list
-                       && ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
-                                       & ohci->hc_control)
-                               == OHCI_USB_OPER
-                       && time_after (jiffies, ohci->next_statechange)
-                       && usb_trylock_device (hcd->self.root_hub) == 0
-                       ) {
+       if (can_suspend && usb_trylock_device (hcd->self.root_hub) == 0) {
                ohci_vdbg (ohci, "autosuspend\n");
                (void) ohci_bus_suspend (hcd);
                usb_unlock_device (hcd->self.root_hub);
index 5602da9..f2c9161 100644 (file)
@@ -173,10 +173,6 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
         * basic lifecycle operations
         */
        .start =                ohci_lh7a404_start,
-#ifdef CONFIG_PM
-       /* suspend:             ohci_lh7a404_suspend,  -- tbd */
-       /* resume:              ohci_lh7a404_resume,   -- tbd */
-#endif /*CONFIG_PM*/
        .stop =                 ohci_stop,
 
        /*
@@ -196,6 +192,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index c4c4bab..47f1c9b 100644 (file)
@@ -382,8 +382,10 @@ ohci_omap_start (struct usb_hcd *hcd)
        int             ret;
 
        config = hcd->self.controller->platform_data;
-       if (config->otg || config->rwc)
+       if (config->otg || config->rwc) {
+               ohci->hc_control = OHCI_CTRL_RWC;
                writel(OHCI_CTRL_RWC, &ohci->regs->control);
+       }
 
        if ((ret = ohci_run (ohci)) < 0) {
                dev_err(hcd->self.controller, "can't start\n");
@@ -429,6 +431,7 @@ static const struct hc_driver ohci_omap_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index 37e1228..ef87444 100644 (file)
@@ -176,11 +176,13 @@ static const struct hc_driver ohci_pci_hc_driver = {
         */
        .reset =                ohci_pci_reset,
        .start =                ohci_pci_start,
+       .stop =                 ohci_stop,
+
 #ifdef CONFIG_PM
+       /* these suspend/resume entries are for upstream PCI glue ONLY */
        .suspend =              ohci_pci_suspend,
        .resume =               ohci_pci_resume,
 #endif
-       .stop =                 ohci_stop,
 
        /*
         * managing i/o requests and associated device resources
@@ -199,6 +201,7 @@ static const struct hc_driver ohci_pci_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index 9fe56ff..270aaaa 100644 (file)
@@ -166,6 +166,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index 6f559e1..2752d36 100644 (file)
@@ -288,6 +288,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef  CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index d2fc696..c4c77d2 100644 (file)
@@ -465,6 +465,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
         */
        .hub_status_data =      ohci_s3c2410_hub_status_data,
        .hub_control =          ohci_s3c2410_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,
index ce3de10..71371de 100644 (file)
@@ -212,10 +212,6 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
         * basic lifecycle operations
         */
        .start =                ohci_sa1111_start,
-#ifdef CONFIG_PM
-       /* suspend:             ohci_sa1111_suspend,  -- tbd */
-       /* resume:              ohci_sa1111_resume,   -- tbd */
-#endif
        .stop =                 ohci_stop,
 
        /*
@@ -235,6 +231,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
         */
        .hub_status_data =      ohci_hub_status_data,
        .hub_control =          ohci_hub_control,
+       .hub_irq_enable =       ohci_rhsc_enable,
 #ifdef CONFIG_PM
        .bus_suspend =          ohci_bus_suspend,
        .bus_resume =           ohci_bus_resume,