TCP protocol
============
-Last updated: 21 June 2005
+Last updated: 9 February 2008
Contents
========
The method that is used to determine which congestion control mechanism is
determined by the setting of the sysctl net.ipv4.tcp_congestion_control.
The default congestion control will be the last one registered (LIFO);
-so if you built everything as modules. the default will be reno. If you
-build with the default's from Kconfig, then BIC will be builtin (not a module)
-and it will end up the default.
+so if you built everything as modules, the default will be reno. If you
+build with the defaults from Kconfig, then CUBIC will be builtin (not a
+module) and it will end up the default.
If you really want a particular default value then you will need
to set it with the sysctl. If you use a sysctl, the module will be autoloaded
iv->sprom.revision = 3;
if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.r1.et0mac);
+ str2eaddr(buf, iv->sprom.et0mac);
if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.r1.et1mac);
+ str2eaddr(buf, iv->sprom.et1mac);
if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.r1.et0phyaddr = simple_strtoul(buf, NULL, 10);
+ iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.r1.et1phyaddr = simple_strtoul(buf, NULL, 10);
+ iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.r1.et0mdcport = simple_strtoul(buf, NULL, 10);
+ iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.r1.et1mdcport = simple_strtoul(buf, NULL, 10);
+ iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
return 0;
}
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
#include <linux/ssb/ssb.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
}
};
+
+/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+ firmware. */
+static struct mtd_partition wgt634u_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0,
+ .size = 0x60000, /* 384k */
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "config",
+ .offset = 0x60000,
+ .size = 0x20000 /* 128k */
+ },
+ {
+ .name = "linux",
+ .offset = 0x80000,
+ .size = 0x140000 /* 1280k */
+ },
+ {
+ .name = "jffs",
+ .offset = 0x1c0000,
+ .size = 0x620000 /* 6272k */
+ },
+ {
+ .name = "nvram",
+ .offset = 0x7e0000,
+ .size = 0x20000 /* 128k */
+ },
+};
+
+static struct physmap_flash_data wgt634u_flash_data = {
+ .parts = wgt634u_partitions,
+ .nr_parts = ARRAY_SIZE(wgt634u_partitions)
+};
+
+static struct resource wgt634u_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device wgt634u_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &wgt634u_flash_data, },
+ .resource = &wgt634u_flash_resource,
+ .num_resources = 1,
+};
+
+/* Platform devices */
+static struct platform_device *wgt634u_devices[] __initdata = {
+ &wgt634u_flash,
+ &wgt634u_gpio_leds,
+};
+
static int __init wgt634u_init(void)
{
/* There is no easy way to detect that we are running on a WGT634U
* been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
*/
- u8 *et0mac = ssb_bcm47xx.sprom.r1.et0mac;
+ u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
if (et0mac[0] == 0x00 &&
((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5)))
- return platform_device_register(&wgt634u_gpio_leds);
- else
+ (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ wgt634u_flash_data.width = mcore->flash_buswidth;
+ wgt634u_flash_resource.start = mcore->flash_window;
+ wgt634u_flash_resource.end = mcore->flash_window
+ + mcore->flash_window_size
+ - 1;
+ return platform_add_devices(wgt634u_devices,
+ ARRAY_SIZE(wgt634u_devices));
+ } else
return -ENODEV;
}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc2
+# Mon Feb 18 11:55:24 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+CONFIG_BCM47XX=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_CFE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+CONFIG_TIPC_ADVANCED=y
+CONFIG_TIPC_ZONES=3
+CONFIG_TIPC_CLUSTERS=1
+CONFIG_TIPC_NODES=255
+CONFIG_TIPC_SLAVE_NODES=0
+CONFIG_TIPC_PORTS=8191
+CONFIG_TIPC_LOG=0
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_SIMPLE is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_NET_9P=m
+CONFIG_NET_9P_FD=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+CONFIG_B44=y
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_ATH5K=m
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+CONFIG_ATM_DUMMY=m
+CONFIG_ATM_TCP=m
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+# CONFIG_SLIP_COMPRESSED is not set
+CONFIG_SLHC=m
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
+CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# ALSA MIPS devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_U132_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_TI is not set
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_SECURITY=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_NCP_FS=m
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_KARMA_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Mon Feb 11 15:58:54 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+CONFIG_SGI_IP28=y
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SGI_HAS_DS1286=y
+CONFIG_SGI_HAS_INDYDOG=y
+CONFIG_SGI_HAS_SEEQ=y
+CONFIG_SGI_HAS_WD93=y
+CONFIG_SGI_HAS_ZILOG=y
+CONFIG_SGI_HAS_I8042=y
+CONFIG_DEFAULT_SGI_PARTITION=y
+CONFIG_MIPS_L1_CACHE_SHIFT=7
+CONFIG_ARC_CONSOLE=y
+CONFIG_ARC_PROMLIB=y
+CONFIG_ARC64=y
+CONFIG_BOOT_ELF64=y
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+CONFIG_CPU_R10000=y
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_R10000=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_MIPS_INSANE_LARGE is not set
+# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_EISA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ISA=y
+CONFIG_EISA=y
+CONFIG_EISA_NAMES=y
+CONFIG_MMU=y
+CONFIG_I8253=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+CONFIG_SGIWD93_SCSI=y
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_SGISEEQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IP22_ZILOG=y
+CONFIG_SERIAL_IP22_ZILOG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+CONFIG_SGI_DS1286=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_INDYDOG=y
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:39 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_COHERENT=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_I8259=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_ISA=y
-CONFIG_MMU=y
-CONFIG_PCSPEAKER=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
-CONFIG_NE2000=y
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
.mask = mask_rm7k_irq,
.mask_ack = mask_rm7k_irq,
.unmask = unmask_rm7k_irq,
+ .eoi = unmask_rm7k_irq
};
void __init rm7k_cpu_irq_init(void)
.mask = mask_rm9k_irq,
.mask_ack = mask_rm9k_irq,
.unmask = unmask_rm9k_irq,
+ .eoi = unmask_rm9k_irq
};
static struct irq_chip rm9k_perfcounter_irq = {
*/
static inline struct task_struct *find_process_by_pid(pid_t pid)
{
- return pid ? find_task_by_pid(pid) : current;
+ return pid ? find_task_by_vpid(pid) : current;
}
sys sys_ni_syscall 0
sys sys_eventfd 1
sys sys_fallocate 6 /* 4320 */
+ sys sys_timerfd_create 2
+ sys sys_timerfd_gettime 2
+ sys sys_timerfd_settime 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_ni_syscall
PTR sys_eventfd
PTR sys_fallocate
+ PTR sys_timerfd_create /* 5280 */
+ PTR sys_timerfd_gettime
+ PTR sys_timerfd_settime
.size sys_call_table,.-sys_call_table
PTR sys_ni_syscall
PTR sys_eventfd
PTR sys_fallocate
+ PTR sys_timerfd_create
+ PTR sys_timerfd_gettime /* 5285 */
+ PTR sys_timerfd_settime
.size sysn32_call_table,.-sysn32_call_table
PTR sys_ni_syscall
PTR sys_eventfd
PTR sys32_fallocate /* 4320 */
+ PTR sys_timerfd_create
+ PTR sys_timerfd_gettime
+ PTR sys_timerfd_settime
.size sys_call_table,.-sys_call_table
printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
current->comm, current->pid);
read_lock(&tasklist_lock);
- task = find_task_by_pid(va_arg(args, pid_t));
+ task = find_task_by_vpid(va_arg(args, pid_t));
error = -ESRCH;
if (error)
error = (task->run_list.next != NULL);
static inline void local_r4k_flush_cache_range(void * args)
{
struct vm_area_struct *vma = args;
+ int exec = vma->vm_flags & VM_EXEC;
if (!(has_valid_asid(vma->vm_mm)))
return;
r4k_blast_dcache();
+ if (exec)
+ r4k_blast_icache();
}
static void r4k_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- if (!cpu_has_dc_aliases)
- return;
+ int exec = vma->vm_flags & VM_EXEC;
- r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+ if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc))
+ r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
}
static inline void local_r4k_flush_cache_mm(void * args)
void __flush_anon_page(struct page *page, unsigned long vmaddr)
{
- if (pages_do_alias((unsigned long)page_address(page), vmaddr)) {
- void *kaddr;
+ unsigned long addr = (unsigned long) page_address(page);
- kaddr = kmap_coherent(page, vmaddr);
- flush_data_cache_page((unsigned long)kaddr);
- kunmap_coherent();
+ if (pages_do_alias(addr, vmaddr)) {
+ if (page_mapped(page) && !Page_dcache_dirty(page)) {
+ void *kaddr;
+
+ kaddr = kmap_coherent(page, vmaddr);
+ flush_data_cache_page((unsigned long)kaddr);
+ kunmap_coherent();
+ } else
+ flush_data_cache_page(addr);
}
}
void *vfrom, *vto;
vto = kmap_atomic(to, KM_USER1);
- if (cpu_has_dc_aliases && page_mapped(from)) {
+ if (cpu_has_dc_aliases &&
+ page_mapped(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
kunmap_coherent();
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases && page_mapped(page)) {
+ if (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
kunmap_coherent();
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases && page_mapped(page)) {
+ if (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
kunmap_coherent();
int i;
for (i = 0; i < DM_NUM_CHANNELS; i++) {
- const u64 base_val = CPHYSADDR(&page_descr[i]) |
+ const u64 base_val = CPHYSADDR((unsigned long)&page_descr[i]) |
V_DM_DSCR_BASE_RINGSZ(1);
void *base_reg = IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
void clear_page(void *page)
{
- u64 to_phys = CPHYSADDR(page);
+ u64 to_phys = CPHYSADDR((unsigned long)page);
unsigned int cpu = smp_processor_id();
/* if the page is not in KSEG0, use old way */
- if ((long)KSEGX(page) != (long)CKSEG0)
+ if ((long)KSEGX((unsigned long)page) != (long)CKSEG0)
return clear_page_cpu(page);
page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM |
void copy_page(void *to, void *from)
{
- u64 from_phys = CPHYSADDR(from);
- u64 to_phys = CPHYSADDR(to);
+ u64 from_phys = CPHYSADDR((unsigned long)from);
+ u64 to_phys = CPHYSADDR((unsigned long)to);
unsigned int cpu = smp_processor_id();
/* if any page is not in KSEG0, use old way */
- if ((long)KSEGX(to) != (long)CKSEG0
- || (long)KSEGX(from) != (long)CKSEG0)
+ if ((long)KSEGX((unsigned long)to) != (long)CKSEG0
+ || (long)KSEGX((unsigned long)from) != (long)CKSEG0)
return copy_page_cpu(to, from);
page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST |
continue;
r = &dev->resource[idx];
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+ printk(KERN_ERR "PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
sb1480_clockevent_init();
local_irq_enable();
- bcm1480_smp_finish();
}
/*
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc2
-# Fri Nov 16 13:36:38 2007
+# Linux kernel version: 2.6.25-rc2
+# Tue Feb 19 18:52:24 2008
#
CONFIG_MN10300=y
CONFIG_AM33=y
# CONFIG_ARCH_SUPPORTS_AOUT is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HOTPLUG_CPU is not set
+CONFIG_HZ=1000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# Matsushita MN10300 system setup
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PARPORT is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
#
# File systems
#
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Profiling support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
try_again:
/* pull chars out of the buffer */
ix = gdbstub_rx_outp;
+ barrier();
if (ix == gdbstub_rx_inp) {
if (nonblock)
return -EAGAIN;
ch = gdbstub_rx_buffer[ix++];
st = gdbstub_rx_buffer[ix++];
+ barrier();
gdbstub_rx_outp = ix & (PAGE_SIZE - 1);
st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF |
/* advance the kernel's time tracking system */
profile_tick(CPU_PROFILING);
do_timer(1);
- update_process_times(user_mode(get_irq_regs()));
check_rtc_time();
}
write_sequnlock(&xtime_lock);
+
+ update_process_times(user_mode(get_irq_regs()));
+
return IRQ_HANDLED;
}
if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
#ifdef CONFIG_GDBSTUB
- __gdbstub_bug_trap();
+ gdbstub_intercept(regs, code);
#endif
}
}
int "Maximum number of CPUs (2-64)"
range 2 64
depends on SMP
- default "32"
+ default "32" if !64BIT
+ default "64" if 64BIT
help
This allows you to specify the maximum number of CPUs which this
kernel will support. The maximum supported value is 64 and the
static void default_idle(void)
{
int cpu, rc;
+ int nr_calls = 0;
+ void *hcpu;
#ifdef CONFIG_SMP
struct s390_idle_data *idle;
#endif
/* CPU is going idle. */
cpu = smp_processor_id();
-
+ hcpu = (void *)(long)cpu;
local_irq_disable();
if (need_resched()) {
local_irq_enable();
return;
}
- rc = atomic_notifier_call_chain(&idle_chain,
- S390_CPU_IDLE, (void *)(long) cpu);
- if (rc != NOTIFY_OK && rc != NOTIFY_DONE)
- BUG();
- if (rc != NOTIFY_OK) {
+ rc = __atomic_notifier_call_chain(&idle_chain, S390_CPU_IDLE, hcpu, -1,
+ &nr_calls);
+ if (rc == NOTIFY_BAD) {
+ nr_calls--;
+ __atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
+ hcpu, nr_calls, NULL);
local_irq_enable();
return;
}
if (!lowcore)
return -ENOMEM;
async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
- if (!async_stack)
- goto out_async_stack;
panic_stack = __get_free_page(GFP_KERNEL);
- if (!panic_stack)
- goto out_panic_stack;
-
- *lowcore = S390_lowcore;
+ if (!panic_stack || !async_stack)
+ goto out;
+ /*
+ * Only need to copy the first 512 bytes from address 0. But since
+ * the compiler emits a warning if src == NULL for memcpy use copy_page
+ * instead. Copies more than needed but this code is not performance
+ * critical.
+ */
+ copy_page(lowcore, &S390_lowcore);
+ memset((void *)lowcore + 512, 0, sizeof(*lowcore) - 512);
lowcore->async_stack = async_stack + ASYNC_SIZE;
lowcore->panic_stack = panic_stack + PAGE_SIZE;
out_save_area:
free_page(panic_stack);
#endif
-out_panic_stack:
+out:
free_pages(async_stack, ASYNC_ORDER);
-out_async_stack:
free_pages((unsigned long) lowcore, lc_order);
return -ENOMEM;
}
cpu_lowcore->percpu_offset = __per_cpu_offset[cpu];
cpu_lowcore->current_task = (unsigned long) idle;
cpu_lowcore->cpu_data.cpu_nr = cpu;
- cpu_lowcore->softirq_pending = 0;
- cpu_lowcore->ext_call_fast = 0;
+ cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+ cpu_lowcore->ipl_device = S390_lowcore.ipl_device;
eieio();
while (signal_processor(cpu, sigp_restart) == sigp_busy)
void __init smp_prepare_cpus(unsigned int max_cpus)
{
+#ifndef CONFIG_64BIT
+ unsigned long save_area = 0;
+#endif
+ unsigned long async_stack, panic_stack;
+ struct _lowcore *lowcore;
unsigned int cpu;
+ int lc_order;
smp_detect_cpus();
/* request the 0x1201 emergency signal external interrupt */
if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
panic("Couldn't request external interrupt 0x1201");
- memset(lowcore_ptr, 0, sizeof(lowcore_ptr));
print_cpu_info(&S390_lowcore.cpu_data);
- smp_alloc_lowcore(smp_processor_id());
+ /* Reallocate current lowcore, but keep its contents. */
+ lc_order = sizeof(long) == 8 ? 1 : 0;
+ lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, lc_order);
+ panic_stack = __get_free_page(GFP_KERNEL);
+ async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE)
- ctl_set_bit(14, 29); /* enable extended save area */
+ save_area = get_zeroed_page(GFP_KERNEL);
#endif
- set_prefix((u32)(unsigned long) lowcore_ptr[smp_processor_id()]);
-
+ local_irq_disable();
+ local_mcck_disable();
+ lowcore_ptr[smp_processor_id()] = lowcore;
+ *lowcore = S390_lowcore;
+ lowcore->panic_stack = panic_stack + PAGE_SIZE;
+ lowcore->async_stack = async_stack + ASYNC_SIZE;
+#ifndef CONFIG_64BIT
+ if (MACHINE_HAS_IEEE)
+ lowcore->extended_save_area_addr = (u32) save_area;
+#endif
+ set_prefix((u32)(unsigned long) lowcore);
+ local_mcck_enable();
+ local_irq_enable();
for_each_possible_cpu(cpu)
if (cpu != smp_processor_id())
smp_create_idle(cpu);
}
}
-#ifdef CONFIG_SMP
static void etr_sync_cpu_start(void *dummy)
{
int *in_sync = dummy;
static void etr_sync_cpu_end(void *dummy)
{
}
-#endif /* CONFIG_SMP */
/*
* Sync the TOD clock using the port refered to by aibp. This port
asm volatile(
" sacf 256\n"
- " cs %1,%4,0(%5)\n"
- "0: lr %0,%1\n"
- "1: sacf 0\n"
- EX_TABLE(0b,1b)
+ "0: cs %1,%4,0(%5)\n"
+ "1: lr %0,%1\n"
+ "2: sacf 0\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+d" (oldval), "=m" (*uaddr)
: "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
: "cc", "memory" );
extern char reboot_command [];
-extern void (*prom_palette)(int);
-
/* XXX cli/sti -> local_irq_xxx here, check this works once SMP is fixed. */
void machine_halt(void)
{
local_irq_enable();
mdelay(8);
local_irq_disable();
- if (prom_palette)
- prom_palette (1);
prom_halt();
panic("Halt failed!");
}
p = strchr (reboot_command, '\n');
if (p) *p = 0;
- if (prom_palette)
- prom_palette (1);
if (cmd)
prom_reboot(cmd);
if (*reboot_command)
*/
extern unsigned long trapbase;
-void (*prom_palette)(int);
/* Pretty sick eh? */
void prom_sync_me(void)
"nop\n\t"
"nop\n\t" : : "r" (&trapbase));
- if (prom_palette)
- prom_palette(1);
prom_printf("PROM SYNC COMMAND...\n");
show_free_areas();
if(current->pid != 0) {
extern void sun4c_probe_vac(void);
extern char cputypval;
extern unsigned long start, end;
-extern void panic_setup(char *, int *);
extern unsigned short root_flags;
extern unsigned short root_dev;
if ((pte = sun4c_pte_alloc_one_fast(mm, address)) != NULL)
return pte;
- pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
- if (pte)
- memset(pte, 0, PAGE_SIZE);
+ pte = (pte_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
return pte;
}
spin_unlock_irqrestore(&prom_lock, flags);
}
-/* We want to do this more nicely some day. */
-extern void (*prom_palette)(int);
-
/* Drop into the prom, with the chance to continue with the 'go'
* prom command.
*/
extern void install_linux_ticker(void);
unsigned long flags;
- if (prom_palette)
- prom_palette (1);
spin_lock_irqsave(&prom_lock, flags);
install_obp_ticker();
(*(romvec->pv_abort))();
#ifdef CONFIG_SUN_AUXIO
set_auxio(AUXIO_LED, 0);
#endif
- if (prom_palette)
- prom_palette (0);
}
/* Drop into the prom, but completely terminate the program.
depends on DEBUG_KERNEL
bool "Stack Overflow Detection Support"
-config DEBUG_BOOTMEM
- depends on DEBUG_KERNEL
- bool "Debug BOOTMEM initialization"
-
config DEBUG_PAGEALLOC
bool "Debug page memory allocations"
depends on DEBUG_KERNEL && !HIBERNATION
CPPFLAGS_vmlinux.lds += -Usparc
-CC := $(shell if $(CC) -m64 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo $(CC); else echo sparc64-linux-gcc; fi )
-
-NEW_GCC := $(call cc-option-yn, -m64 -mcmodel=medlow)
-NEW_GAS := $(shell if $(LD) -V 2>&1 | grep 'elf64_sparc' > /dev/null; then echo y; else echo n; fi)
-UNDECLARED_REGS := $(shell if $(CC) -c -x assembler /dev/null -Wa,--help | grep undeclared-regs > /dev/null; then echo y; else echo n; fi; )
-
-ifneq ($(NEW_GAS),y)
-AS = sparc64-linux-as
-LD = sparc64-linux-ld
-NM = sparc64-linux-nm
-AR = sparc64-linux-ar
-RANLIB = sparc64-linux-ranlib
-else
-AS := $(AS) -64
LDFLAGS := -m elf64_sparc
-endif
-ifneq ($(UNDECLARED_REGS),y)
-CC_UNDECL =
-else
-CC_UNDECL = -Wa,--undeclared-regs
-AS := $(AS) --undeclared-regs
-endif
-
-ifneq ($(NEW_GCC),y)
- KBUILD_CFLAGS += -pipe -mno-fpu -mtune=ultrasparc -mmedlow \
- -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare
-else
- KBUILD_CFLAGS += -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow \
- -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare \
- $(CC_UNDECL)
- KBUILD_AFLAGS += -m64 -mcpu=ultrasparc $(CC_UNDECL)
-endif
+KBUILD_CFLAGS += -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow \
+ -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare \
+ -Wa,--undeclared-regs
+KBUILD_CFLAGS += $(call cc-option,-mtune=ultrasparc3)
+KBUILD_AFLAGS += -m64 -mcpu=ultrasparc -Wa,--undeclared-regs
ifeq ($(CONFIG_MCOUNT),y)
KBUILD_CFLAGS += -pg
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Feb 5 17:28:19 2008
+# Linux kernel version: 2.6.25-rc1
+# Sun Feb 17 22:44:12 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_IOMMU_HELPER=y
CONFIG_QUICKLIST=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
-CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SOLARIS_EMUL=y
CONFIG_SCHED_SMT=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
/* Allocate and initialize the dummy page which we
* set inactive IO PTEs to point to.
*/
- iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
+ iommu->dummy_page = get_zeroed_page(GFP_KERNEL);
if (!iommu->dummy_page) {
printk(KERN_ERR "IOMMU: Error, gfp(dummy_page) failed.\n");
goto out_free_map;
}
- memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
/* Now allocate and setup the IOMMU page table itself. */
return 0;
}
-static int __init pci_is_controller(const char *model_name, int namelen, struct device_node *dp)
-{
- int i;
-
- for (i = 0; i < PCI_NUM_CONTROLLER_TYPES; i++) {
- if (!strncmp(model_name,
- pci_controller_table[i].model_name,
- namelen)) {
- return 1;
- }
- }
- return 0;
-}
-
static int __init pci_controller_scan(int (*handler)(const char *, int, struct device_node *))
{
struct device_node *dp;
return count;
}
-
-/* Is there some PCI controller in the system? */
-int __init pcic_present(void)
-{
- return pci_controller_scan(pci_is_controller);
-}
-
/* Find each controller in the system, attach and initialize
* software state structure for each and link into the
* pci_pbm_root. Setup the controller enough such
extern char reboot_command [];
-extern void (*prom_palette)(int);
-extern void (*prom_keyboard)(void);
-
void machine_halt(void)
{
sstate_halt();
- if (prom_palette)
- prom_palette (1);
- if (prom_keyboard)
- prom_keyboard();
prom_halt();
panic("Halt failed!");
}
void machine_alt_power_off(void)
{
sstate_poweroff();
- if (prom_palette)
- prom_palette(1);
- if (prom_keyboard)
- prom_keyboard();
prom_halt_power_off();
panic("Power-off failed!");
}
sstate_reboot();
p = strchr (reboot_command, '\n');
if (p) *p = 0;
- if (prom_palette)
- prom_palette (1);
- if (prom_keyboard)
- prom_keyboard();
if (cmd)
prom_reboot(cmd);
if (*reboot_command)
of_console_device = dp;
- prom_printf(msg, of_console_path);
printk(msg, of_console_path);
}
16 /* orig-video-points */
};
-void (*prom_palette)(int);
-void (*prom_keyboard)(void);
-
static void
prom_console_write(struct console *con, const char *s, unsigned n)
{
prom_write(s, n);
}
-unsigned int boot_flags = 0;
-#define BOOTME_DEBUG 0x1
-
/* Exported for mm/init.c:paging_init. */
unsigned long cmdline_memory_size = 0;
-static struct console prom_debug_console = {
- .name = "debug",
+static struct console prom_early_console = {
+ .name = "earlyprom",
.write = prom_console_write,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
.index = -1,
};
-/* XXX Implement this at some point... */
-void kernel_enter_debugger(void)
-{
-}
-
/*
* Process kernel command line switches that are specific to the
* SPARC or that require special low-level processing.
{
switch (c) {
case 'd':
- boot_flags |= BOOTME_DEBUG;
- break;
case 's':
break;
case 'h':
prom_halt();
break;
case 'p':
- /* Use PROM debug console. */
- register_console(&prom_debug_console);
+ /* Just ignore, this behavior is now the default. */
break;
case 'P':
/* Force UltraSPARC-III P-Cache on. */
}
}
-extern void panic_setup(char *, int *);
-
extern unsigned short root_flags;
extern unsigned short root_dev;
extern unsigned short ram_flags;
*cmdline_p = prom_getbootargs();
strcpy(boot_command_line, *cmdline_p);
+ boot_flags_init(*cmdline_p);
+ register_console(&prom_early_console);
+
if (tlb_type == hypervisor)
printk("ARCH: SUN4V\n");
else
conswitchp = &prom_con;
#endif
- boot_flags_init(*cmdline_p);
-
idprom_init();
if (!root_flags)
extern long sparc32_open(const char __user * filename, int flags, int mode);
extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
unsigned long pfn, unsigned long size, pgprot_t prot);
-extern void (*prom_palette)(int);
extern int __ashrdi3(int, int);
EXPORT_SYMBOL(xor_niagara_3);
EXPORT_SYMBOL(xor_niagara_4);
EXPORT_SYMBOL(xor_niagara_5);
-
-EXPORT_SYMBOL(prom_palette);
*/
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
{
static unsigned long count, last_time;
- if (jiffies - last_time > 5 * HZ)
+ if (time_after(jiffies, last_time + 5 * HZ))
count = 0;
if (count < 5) {
last_time = jiffies;
read_obp_translations();
/* Now fixup OBP's idea about where we really are mapped. */
- prom_printf("Remapping the kernel... ");
+ printk("Remapping the kernel... ");
remap_kernel();
- prom_printf("done.\n");
+ printk("done.\n");
}
void prom_world(int enter)
avoid_end = PAGE_ALIGN(initrd_end);
#endif
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("choose_bootmap_pfn: kern[%lx:%lx] avoid[%lx:%lx]\n",
- kern_base, PAGE_ALIGN(kern_base + kern_size),
- avoid_start, avoid_end);
-#endif
for (i = 0; i < pavail_ents; i++) {
unsigned long start, end;
}
/* OK, it doesn't overlap anything, use it. */
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("choose_bootmap_pfn: Using %lx [%lx]\n",
- start >> PAGE_SHIFT, start);
-#endif
return start >> PAGE_SHIFT;
}
}
unsigned long bootmap_pfn, bytes_avail, size;
int i;
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("bootmem_init: Scan pavail, ");
-#endif
-
bytes_avail = 0UL;
for (i = 0; i < pavail_ents; i++) {
end_of_phys_memory = pavail[i].phys_addr +
bootmap_pfn = choose_bootmap_pfn(min_low_pfn, end_pfn);
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("init_bootmem(min[%lx], bootmap[%lx], max[%lx])\n",
- min_low_pfn, bootmap_pfn, max_low_pfn);
-#endif
bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn,
min_low_pfn, end_pfn);
/* Now register the available physical memory with the
* allocator.
*/
- for (i = 0; i < pavail_ents; i++) {
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("free_bootmem(pavail:%d): base[%lx] size[%lx]\n",
- i, pavail[i].phys_addr, pavail[i].reg_size);
-#endif
+ for (i = 0; i < pavail_ents; i++)
free_bootmem(pavail[i].phys_addr, pavail[i].reg_size);
- }
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start) {
size = initrd_end - initrd_start;
/* Reserve the initrd image area. */
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("reserve_bootmem(initrd): base[%llx] size[%lx]\n",
- initrd_start, initrd_end);
-#endif
reserve_bootmem(initrd_start, size, BOOTMEM_DEFAULT);
initrd_start += PAGE_OFFSET;
}
#endif
/* Reserve the kernel text/data/bss. */
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("reserve_bootmem(kernel): base[%lx] size[%lx]\n", kern_base, kern_size);
-#endif
reserve_bootmem(kern_base, kern_size, BOOTMEM_DEFAULT);
*pages_avail -= PAGE_ALIGN(kern_size) >> PAGE_SHIFT;
* in free_all_bootmem.
*/
size = bootmap_size;
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("reserve_bootmem(bootmap): base[%lx] size[%lx]\n",
- (bootmap_pfn << PAGE_SHIFT), size);
-#endif
reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT);
for (i = 0; i < pavail_ents; i++) {
start_pfn = pavail[i].phys_addr >> PAGE_SHIFT;
end_pfn = (start_pfn + (pavail[i].reg_size >> PAGE_SHIFT));
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("memory_present(0, %lx, %lx)\n",
- start_pfn, end_pfn);
-#endif
memory_present(0, start_pfn, end_pfn);
}
zholes_size);
}
- prom_printf("Booting Linux...\n");
+ printk("Booting Linux...\n");
central_probe();
cpu_probe();
high_memory = __va(last_valid_pfn << PAGE_SHIFT);
-#ifdef CONFIG_DEBUG_BOOTMEM
- prom_printf("mem_init: Calling free_all_bootmem().\n");
-#endif
-
/* We subtract one to account for the mem_map_zero page
* allocated below.
*/
P1275_INOUT(1, 1), fstring);
}
-/* We want to do this more nicely some day. */
-extern void (*prom_palette)(int);
-
#ifdef CONFIG_SMP
extern void smp_capture(void);
extern void smp_release(void);
local_irq_save(flags);
- if (prom_palette)
- prom_palette(1);
-
#ifdef CONFIG_SMP
smp_capture();
#endif
smp_release();
#endif
- if (prom_palette)
- prom_palette(0);
-
local_irq_restore(flags);
}
head-y := arch/xtensa/kernel/head.o
core-y += arch/xtensa/kernel/ arch/xtensa/mm/
ifneq ($(PLATFORM),)
-core-y += arch/xtensa/platform-$(PLATFORM)/
+core-y += arch/xtensa/platforms/$(PLATFORM)/
endif
libs-y += arch/xtensa/lib/ $(LIBGCC)
endif
export OBJCOPY_ARGS
+export CPPFLAGS_boot.lds += -P -C
boot-y := bootstrap.o
OBJS := $(addprefix $(obj)/,$(boot-y))
-Image: vmlinux $(OBJS)
- $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \
+Image: vmlinux $(OBJS) arch/$(ARCH)/boot/boot-elf/boot.lds
+ $(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
vmlinux vmlinux.tmp
$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
--add-section image=vmlinux.tmp \
--set-section-flags image=contents,alloc,load,load,data \
$(OBJS) $@.tmp
$(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \
- -T $(srctree)/arch/$(ARCH)/boot/boot-elf/boot.ld \
+ -T arch/$(ARCH)/boot/boot-elf/boot.lds \
-o arch/$(ARCH)/boot/$@.elf $@.tmp
rm -f $@.tmp vmlinux.tmp
Image.initrd: vmlinux $(OBJS)
- $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \
+ $(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
--add-section .initrd=arch/$(ARCH)/boot/ramdisk \
--set-section-flags .initrd=contents,alloc,load,load,data \
vmlinux vmlinux.tmp
+#include <asm/variant/core.h>
OUTPUT_ARCH(xtensa)
+ENTRY(_ResetVector)
SECTIONS
{
_end = .;
_param_start = .;
- .ResetVector.text 0xfe000020 :
+ .ResetVector.text XCHAL_RESET_VECTOR_VADDR :
{
*(.ResetVector.text)
}
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
zImage: vmlinux $(OBJS) $(LIBS)
- $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \
+ $(OBJCOPY) --strip-all -R .comment -R .note.gnu.build-id -O binary \
vmlinux vmlinux.tmp
gzip -vf9 vmlinux.tmp
$(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \
SECTIONS
{
- .start 0xD0200000 : { *(.start) }
+ .start 0xD1000000 : { *(.start) }
.text :
{
#include <linux/mm.h>
#include <asm/ptrace.h>
-#include <asm/processor.h>
#include <asm/uaccess.h>
#define DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val))
DEFINE(PT_SIZE, sizeof(struct pt_regs));
DEFINE(PT_AREG_END, offsetof (struct pt_regs, areg[XCHAL_NUM_AREGS]));
DEFINE(PT_USER_SIZE, offsetof(struct pt_regs, areg[XCHAL_NUM_AREGS]));
+ DEFINE(PT_XTREGS_OPT, offsetof(struct pt_regs, xtregs_opt));
+ DEFINE(XTREGS_OPT_SIZE, sizeof(xtregs_opt_t));
/* struct task_struct */
DEFINE(TASK_PTRACE, offsetof (struct task_struct, ptrace));
/* struct thread_info (offset from start_struct) */
DEFINE(THREAD_RA, offsetof (struct task_struct, thread.ra));
DEFINE(THREAD_SP, offsetof (struct task_struct, thread.sp));
- DEFINE(THREAD_CP_SAVE, offsetof (struct task_struct, thread.cp_save));
+ DEFINE(THREAD_CPENABLE, offsetof (struct thread_info, cpenable));
+#if XTENSA_HAVE_COPROCESSORS
+ DEFINE(THREAD_XTREGS_CP0, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP1, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP2, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP3, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP4, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP5, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP6, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP7, offsetof (struct thread_info, xtregs_cp));
+#endif
+ DEFINE(THREAD_XTREGS_USER, offsetof (struct thread_info, xtregs_user));
+ DEFINE(XTREGS_USER_SIZE, sizeof(xtregs_user_t));
DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, thread.current_ds));
/* struct mm_struct */
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 - 2005 Tensilica Inc.
- *
- * Marc Gauthier <marc@tensilica.com> <marc@alumni.uwaterloo.ca>
+ * Copyright (C) 2003 - 2007 Tensilica Inc.
*/
-/*
- * This module contains a table that describes the layout of the various
- * custom registers and states associated with each coprocessor, as well
- * as those not associated with any coprocessor ("extra state").
- * This table is included with core dumps and is available via the ptrace
- * interface, allowing the layout of such register/state information to
- * be modified in the kernel without affecting the debugger. Each
- * register or state is identified using a 32-bit "libdb target number"
- * assigned when the Xtensa processor is generated.
- */
#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
#include <asm/processor.h>
+#include <asm/coprocessor.h>
+#include <asm/thread_info.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/signal.h>
+#include <asm/tlbflush.h>
-#if XCHAL_HAVE_CP
+/*
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: dispatch table
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: a3
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
-#define CP_LAST ((XCHAL_CP_MAX - 1) * COPROCESSOR_INFO_SIZE)
+/* IO protection is currently unsupported. */
-ENTRY(release_coprocessors)
+ENTRY(fast_io_protect)
+ wsr a0, EXCSAVE_1
+ movi a0, unrecoverable_exception
+ callx0 a0
- entry a1, 16
- # a2: task
- movi a3, 1 << XCHAL_CP_MAX # a3: coprocessor-bit
- movi a4, coprocessor_info+CP_LAST # a4: owner-table
- # a5: tmp
- movi a6, 0 # a6: 0
- rsil a7, LOCKLEVEL # a7: PS
+#if XTENSA_HAVE_COPROCESSORS
-1: /* Check if task is coprocessor owner of coprocessor[i]. */
+/*
+ * Macros for lazy context switch.
+ */
- l32i a5, a4, COPROCESSOR_INFO_OWNER
- srli a3, a3, 1
- beqz a3, 1f
- addi a4, a4, -8
- beq a2, a5, 1b
+#define SAVE_CP_REGS(x) \
+ .align 4; \
+ .Lsave_cp_regs_cp##x: \
+ .if XTENSA_HAVE_COPROCESSOR(x); \
+ xchal_cp##x##_store a2 a4 a5 a6 a7; \
+ .endif; \
+ jx a0
- /* Found an entry: Clear entry CPENABLE bit to disable CP. */
+#define SAVE_CP_REGS_TAB(x) \
+ .if XTENSA_HAVE_COPROCESSOR(x); \
+ .long .Lsave_cp_regs_cp##x - .Lsave_cp_regs_jump_table; \
+ .else; \
+ .long 0; \
+ .endif; \
+ .long THREAD_XTREGS_CP##x
- rsr a5, CPENABLE
- s32i a6, a4, COPROCESSOR_INFO_OWNER
- xor a5, a3, a5
- wsr a5, CPENABLE
- bnez a3, 1b
+#define LOAD_CP_REGS(x) \
+ .align 4; \
+ .Lload_cp_regs_cp##x: \
+ .if XTENSA_HAVE_COPROCESSOR(x); \
+ xchal_cp##x##_load a2 a4 a5 a6 a7; \
+ .endif; \
+ jx a0
-1: wsr a7, PS
- rsync
- retw
+#define LOAD_CP_REGS_TAB(x) \
+ .if XTENSA_HAVE_COPROCESSOR(x); \
+ .long .Lload_cp_regs_cp##x - .Lload_cp_regs_jump_table; \
+ .else; \
+ .long 0; \
+ .endif; \
+ .long THREAD_XTREGS_CP##x
+ SAVE_CP_REGS(0)
+ SAVE_CP_REGS(1)
+ SAVE_CP_REGS(2)
+ SAVE_CP_REGS(3)
+ SAVE_CP_REGS(4)
+ SAVE_CP_REGS(5)
+ SAVE_CP_REGS(6)
+ SAVE_CP_REGS(7)
-ENTRY(disable_coprocessor)
- entry sp, 16
- rsil a7, LOCKLEVEL
- rsr a3, CPENABLE
- movi a4, 1
- ssl a2
- sll a4, a4
- and a4, a3, a4
- xor a3, a3, a4
- wsr a3, CPENABLE
- wsr a7, PS
- rsync
- retw
+ LOAD_CP_REGS(0)
+ LOAD_CP_REGS(1)
+ LOAD_CP_REGS(2)
+ LOAD_CP_REGS(3)
+ LOAD_CP_REGS(4)
+ LOAD_CP_REGS(5)
+ LOAD_CP_REGS(6)
+ LOAD_CP_REGS(7)
-ENTRY(enable_coprocessor)
- entry sp, 16
- rsil a7, LOCKLEVEL
- rsr a3, CPENABLE
- movi a4, 1
- ssl a2
- sll a4, a4
- or a3, a3, a4
- wsr a3, CPENABLE
- wsr a7, PS
- rsync
- retw
+ .align 4
+.Lsave_cp_regs_jump_table:
+ SAVE_CP_REGS_TAB(0)
+ SAVE_CP_REGS_TAB(1)
+ SAVE_CP_REGS_TAB(2)
+ SAVE_CP_REGS_TAB(3)
+ SAVE_CP_REGS_TAB(4)
+ SAVE_CP_REGS_TAB(5)
+ SAVE_CP_REGS_TAB(6)
+ SAVE_CP_REGS_TAB(7)
+.Lload_cp_regs_jump_table:
+ LOAD_CP_REGS_TAB(0)
+ LOAD_CP_REGS_TAB(1)
+ LOAD_CP_REGS_TAB(2)
+ LOAD_CP_REGS_TAB(3)
+ LOAD_CP_REGS_TAB(4)
+ LOAD_CP_REGS_TAB(5)
+ LOAD_CP_REGS_TAB(6)
+ LOAD_CP_REGS_TAB(7)
-ENTRY(save_coprocessor_extra)
- entry sp, 16
- xchal_extra_store_funcbody
- retw
+/*
+ * coprocessor_save(buffer, index)
+ * a2 a3
+ * coprocessor_load(buffer, index)
+ * a2 a3
+ *
+ * Save or load coprocessor registers for coprocessor 'index'.
+ * The register values are saved to or loaded from them 'buffer' address.
+ *
+ * Note that these functions don't update the coprocessor_owner information!
+ *
+ */
-ENTRY(restore_coprocessor_extra)
- entry sp, 16
- xchal_extra_load_funcbody
+ENTRY(coprocessor_save)
+ entry a1, 32
+ s32i a0, a1, 0
+ movi a0, .Lsave_cp_regs_jump_table
+ addx8 a3, a3, a0
+ l32i a3, a3, 0
+ beqz a3, 1f
+ add a0, a0, a3
+ callx0 a0
+1: l32i a0, a1, 0
retw
-ENTRY(save_coprocessor_registers)
- entry sp, 16
- xchal_cpi_store_funcbody
+ENTRY(coprocessor_load)
+ entry a1, 32
+ s32i a0, a1, 0
+ movi a0, .Lload_cp_regs_jump_table
+ addx4 a3, a3, a0
+ l32i a3, a3, 0
+ beqz a3, 1f
+ add a0, a0, a3
+ callx0 a0
+1: l32i a0, a1, 0
retw
-ENTRY(restore_coprocessor_registers)
- entry sp, 16
- xchal_cpi_load_funcbody
+/*
+ * coprocessor_flush(struct task_info*, index)
+ * a2 a3
+ * coprocessor_restore(struct task_info*, index)
+ * a2 a3
+ *
+ * Save or load coprocessor registers for coprocessor 'index'.
+ * The register values are saved to or loaded from the coprocessor area
+ * inside the task_info structure.
+ *
+ * Note that these functions don't update the coprocessor_owner information!
+ *
+ */
+
+
+ENTRY(coprocessor_flush)
+ entry a1, 32
+ s32i a0, a1, 0
+ movi a0, .Lsave_cp_regs_jump_table
+ addx8 a3, a3, a0
+ l32i a4, a3, 4
+ l32i a3, a3, 0
+ add a2, a2, a4
+ beqz a3, 1f
+ add a0, a0, a3
+ callx0 a0
+1: l32i a0, a1, 0
retw
+ENTRY(coprocessor_restore)
+ entry a1, 32
+ s32i a0, a1, 0
+ movi a0, .Lload_cp_regs_jump_table
+ addx4 a3, a3, a0
+ l32i a4, a3, 4
+ l32i a3, a3, 0
+ add a2, a2, a4
+ beqz a3, 1f
+ add a0, a0, a3
+ callx0 a0
+1: l32i a0, a1, 0
+ retw
/*
- * The Xtensa compile-time HAL (core.h) XCHAL_*_SA_CONTENTS_LIBDB macros
- * describe the contents of coprocessor & extra save areas in terms of
- * undefined CONTENTS_LIBDB_{SREG,UREG,REGF} macros. We define these
- * latter macros here; they expand into a table of the format we want.
- * The general format is:
+ * Entry condition:
*
- * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum,
- * bitmask, rsv2, rsv3)
- * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum,
- * bitmask, rsv2, rsv3)
- * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index,
- * numentries, contentsize, regname_base,
- * regfile_name, rsv2, rsv3)
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: dispatch table
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: a3
*
- * For this table, we only care about the <libdbnum>, <offset> and <size>
- * fields.
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
-/* Map all XCHAL CONTENTS macros to the reg_entry asm macro defined below: */
-
-#define CONTENTS_LIBDB_SREG(libdbnum,offset,size,align,rsv1,name,sregnum, \
- bitmask, rsv2, rsv3) \
- reg_entry libdbnum, offset, size ;
-#define CONTENTS_LIBDB_UREG(libdbnum,offset,size,align,rsv1,name,uregnum, \
- bitmask, rsv2, rsv3) \
- reg_entry libdbnum, offset, size ;
-#define CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, \
- numentries, contentsize, regname_base, \
- regfile_name, rsv2, rsv3) \
- reg_entry libdbnum, offset, size ;
-
-/* A single table entry: */
- .macro reg_entry libdbnum, offset, size
- .ifne (__last_offset-(__last_group_offset+\offset))
- /* padding entry */
- .word (0xFC000000+__last_offset-(__last_group_offset+\offset))
- .endif
- .word \libdbnum /* actual entry */
- .set __last_offset, __last_group_offset+\offset+\size
- .endm /* reg_entry */
-
-
-/* Table entry that marks the beginning of a group (coprocessor or "extra"): */
- .macro reg_group cpnum, num_entries, align
- .set __last_group_offset, (__last_offset + \align- 1) & -\align
- .ifne \num_entries
- .word 0xFD000000+(\cpnum<<16)+\num_entries
- .endif
- .endm /* reg_group */
+ENTRY(fast_coprocessor_double)
+ wsr a0, EXCSAVE_1
+ movi a0, unrecoverable_exception
+ callx0 a0
-/*
- * Register info tables.
- */
- .section .rodata, "a"
- .globl _xtensa_reginfo_tables
- .globl _xtensa_reginfo_table_size
- .align 4
-_xtensa_reginfo_table_size:
- .word _xtensa_reginfo_table_end - _xtensa_reginfo_tables
-
-_xtensa_reginfo_tables:
- .set __last_offset, 0
- reg_group 0xFF, XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM, XCHAL_EXTRA_SA_ALIGN
- XCHAL_EXTRA_SA_CONTENTS_LIBDB
- reg_group 0, XCHAL_CP0_SA_CONTENTS_LIBDB_NUM, XCHAL_CP0_SA_ALIGN
- XCHAL_CP0_SA_CONTENTS_LIBDB
- reg_group 1, XCHAL_CP1_SA_CONTENTS_LIBDB_NUM, XCHAL_CP1_SA_ALIGN
- XCHAL_CP1_SA_CONTENTS_LIBDB
- reg_group 2, XCHAL_CP2_SA_CONTENTS_LIBDB_NUM, XCHAL_CP2_SA_ALIGN
- XCHAL_CP2_SA_CONTENTS_LIBDB
- reg_group 3, XCHAL_CP3_SA_CONTENTS_LIBDB_NUM, XCHAL_CP3_SA_ALIGN
- XCHAL_CP3_SA_CONTENTS_LIBDB
- reg_group 4, XCHAL_CP4_SA_CONTENTS_LIBDB_NUM, XCHAL_CP4_SA_ALIGN
- XCHAL_CP4_SA_CONTENTS_LIBDB
- reg_group 5, XCHAL_CP5_SA_CONTENTS_LIBDB_NUM, XCHAL_CP5_SA_ALIGN
- XCHAL_CP5_SA_CONTENTS_LIBDB
- reg_group 6, XCHAL_CP6_SA_CONTENTS_LIBDB_NUM, XCHAL_CP6_SA_ALIGN
- XCHAL_CP6_SA_CONTENTS_LIBDB
- reg_group 7, XCHAL_CP7_SA_CONTENTS_LIBDB_NUM, XCHAL_CP7_SA_ALIGN
- XCHAL_CP7_SA_CONTENTS_LIBDB
- .word 0xFC000000 /* invalid register number,marks end of table*/
-_xtensa_reginfo_table_end:
-#endif
+ENTRY(fast_coprocessor)
+
+ /* Save remaining registers a1-a3 and SAR */
+
+ xsr a3, EXCSAVE_1
+ s32i a3, a2, PT_AREG3
+ rsr a3, SAR
+ s32i a1, a2, PT_AREG1
+ s32i a3, a2, PT_SAR
+ mov a1, a2
+ rsr a2, DEPC
+ s32i a2, a1, PT_AREG2
+
+ /*
+ * The hal macros require up to 4 temporary registers. We use a3..a6.
+ */
+
+ s32i a4, a1, PT_AREG4
+ s32i a5, a1, PT_AREG5
+ s32i a6, a1, PT_AREG6
+
+ /* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
+
+ rsr a3, EXCCAUSE
+ addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
+
+ /* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1<<cp-index)*/
+
+ ssl a3 # SAR: 32 - coprocessor_number
+ movi a2, 1
+ rsr a0, CPENABLE
+ sll a2, a2
+ or a0, a0, a2
+ wsr a0, CPENABLE
+ rsync
+
+ /* Retrieve previous owner. (a3 still holds CP number) */
+
+ movi a0, coprocessor_owner # list of owners
+ addx4 a0, a3, a0 # entry for CP
+ l32i a4, a0, 0
+
+ beqz a4, 1f # skip 'save' if no previous owner
+
+ /* Disable coprocessor for previous owner. (a2 = 1 << CP number) */
+
+ l32i a5, a4, THREAD_CPENABLE
+ xor a5, a5, a2 # (1 << cp-id) still in a2
+ s32i a5, a4, THREAD_CPENABLE
+
+ /*
+ * Get context save area and 'call' save routine.
+ * (a4 still holds previous owner (thread_info), a3 CP number)
+ */
+
+ movi a5, .Lsave_cp_regs_jump_table
+ movi a0, 2f # a0: 'return' address
+ addx8 a3, a3, a5 # a3: coprocessor number
+ l32i a2, a3, 4 # a2: xtregs offset
+ l32i a3, a3, 0 # a3: jump offset
+ add a2, a2, a4
+ add a4, a3, a5 # a4: address of save routine
+ jx a4
+
+ /* Note that only a0 and a1 were preserved. */
+
+2: rsr a3, EXCCAUSE
+ addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED
+ movi a0, coprocessor_owner
+ addx4 a0, a3, a0
+
+ /* Set new 'owner' (a0 points to the CP owner, a3 contains the CP nr) */
+
+1: GET_THREAD_INFO (a4, a1)
+ s32i a4, a0, 0
+
+ /* Get context save area and 'call' load routine. */
+
+ movi a5, .Lload_cp_regs_jump_table
+ movi a0, 1f
+ addx8 a3, a3, a5
+ l32i a2, a3, 4 # a2: xtregs offset
+ l32i a3, a3, 0 # a3: jump offset
+ add a2, a2, a4
+ add a4, a3, a5
+ jx a4
+
+ /* Restore all registers and return from exception handler. */
+
+1: l32i a6, a1, PT_AREG6
+ l32i a5, a1, PT_AREG5
+ l32i a4, a1, PT_AREG4
+
+ l32i a0, a1, PT_SAR
+ l32i a3, a1, PT_AREG3
+ l32i a2, a1, PT_AREG2
+ wsr a0, SAR
+ l32i a0, a1, PT_AREG0
+ l32i a1, a1, PT_AREG1
+
+ rfe
+
+ .data
+ENTRY(coprocessor_owner)
+ .fill XCHAL_CP_MAX, 4, 0
+
+#endif /* XTENSA_HAVE_COPROCESSORS */
#include <asm/page.h>
#include <asm/signal.h>
#include <asm/tlbflush.h>
+#include <asm/variant/tie-asm.h>
/* Unimplemented features. */
-#undef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
#undef KERNEL_STACK_OVERFLOW_CHECK
#undef PREEMPTIBLE_KERNEL
#undef ALLOCA_EXCEPTION_IN_IRAM
/* We are back to the original stack pointer (a1) */
-2:
-#if XCHAL_EXTRA_SA_SIZE
-
- /* For user exceptions, save the extra state into the user's TCB.
- * Note: We must assume that xchal_extra_store_funcbody destroys a2..a15
- */
-
- GET_CURRENT(a2,a1)
- addi a2, a2, THREAD_CP_SAVE
- xchal_extra_store_funcbody
-#endif
-
- /* Now, jump to the common exception handler. */
+2: /* Now, jump to the common exception handler. */
j common_exception
s32i a2, a1, PT_LBEG
s32i a3, a1, PT_LEND
+ /* Save optional registers. */
+
+ save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
+
/* Go to second-level dispatcher. Set up parameters to pass to the
* exception handler and call the exception handler.
*/
/* Jump if we are returning from kernel exceptions. */
1: l32i a3, a1, PT_PS
- _bbsi.l a3, PS_UM_BIT, 2f
- j kernel_exception_exit
+ _bbci.l a3, PS_UM_BIT, 4f
/* Specific to a user exception exit:
* We need to check some flags for signal handling and rescheduling,
* and have to restore WB and WS, extra states, and all registers
* in the register file that were in use in the user task.
- */
-
-2: wsr a3, PS /* disable interrupts */
-
- /* Check for signals (keep interrupts disabled while we read TI_FLAGS)
- * Note: PS.INTLEVEL = 0, PS.EXCM = 1
+ * Note that we don't disable interrupts here.
*/
GET_THREAD_INFO(a2,a1)
l32i a4, a2, TI_FLAGS
- /* Enable interrupts again.
- * Note: When we get here, we certainly have handled any interrupts.
- * (Hint: There is only one user exception frame on stack)
- */
-
- movi a3, 1 << PS_WOE_BIT
-
_bbsi.l a4, TIF_NEED_RESCHED, 3f
_bbci.l a4, TIF_SIGPENDING, 4f
-#ifndef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
l32i a4, a1, PT_DEPC
bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f
-#endif
- /* Reenable interrupts and call do_signal() */
+ /* Call do_signal() */
- wsr a3, PS
movi a4, do_signal # int do_signal(struct pt_regs*, sigset_t*)
mov a6, a1
movi a7, 0
callx4 a4
j 1b
-3: /* Reenable interrupts and reschedule */
+3: /* Reschedule */
- wsr a3, PS
movi a4, schedule # void schedule (void)
callx4 a4
j 1b
- /* Restore the state of the task and return from the exception. */
-
-4: /* a2 holds GET_CURRENT(a2,a1) */
-
-#if XCHAL_EXTRA_SA_SIZE
+4: /* Restore optional registers. */
- /* For user exceptions, restore the extra state from the user's TCB. */
+ load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
- /* Note: a2 still contains GET_CURRENT(a2,a1) */
- addi a2, a2, THREAD_CP_SAVE
- xchal_extra_load_funcbody
+ wsr a3, PS /* disable interrupts */
- /* We must assume that xchal_extra_store_funcbody destroys
- * registers a2..a15. FIXME, this list can eventually be
- * reduced once real register requirements of the macro are
- * finalized. */
+ _bbci.l a3, PS_UM_BIT, kernel_exception_exit
-#endif /* XCHAL_EXTRA_SA_SIZE */
+user_exception_exit:
+ /* Restore the state of the task and return from the exception. */
/* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */
kernel_exception_exit:
- /* Disable interrupts (a3 holds PT_PS) */
-
- wsr a3, PS
-
#ifdef PREEMPTIBLE_KERNEL
#ifdef CONFIG_PREEMPT
common_exception_exit:
+ /* Restore address registers. */
+
_bbsi.l a2, 1, 1f
l32i a4, a1, PT_AREG4
l32i a5, a1, PT_AREG5
* excsave_1: a3
*
* Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
- * Note: We don't need to save a2 in depc (return value)
*/
ENTRY(fast_syscall_spill_registers)
rsr a0, SAR
xsr a3, EXCSAVE_1 # restore a3 and excsave_1
- s32i a0, a2, PT_AREG4 # store SAR to PT_AREG4
s32i a3, a2, PT_AREG3
+ s32i a4, a2, PT_AREG4
+ s32i a0, a2, PT_AREG5 # store SAR to PT_AREG5
/* The spill routine might clobber a7, a11, and a15. */
- s32i a7, a2, PT_AREG5
- s32i a11, a2, PT_AREG6
- s32i a15, a2, PT_AREG7
+ s32i a7, a2, PT_AREG7
+ s32i a11, a2, PT_AREG11
+ s32i a15, a2, PT_AREG15
- call0 _spill_registers # destroys a3, DEPC, and SAR
+ call0 _spill_registers # destroys a3, a4, and SAR
/* Advance PC, restore registers and SAR, and return from exception. */
- l32i a3, a2, PT_AREG4
+ l32i a3, a2, PT_AREG5
+ l32i a4, a2, PT_AREG4
l32i a0, a2, PT_AREG0
wsr a3, SAR
l32i a3, a2, PT_AREG3
/* Restore clobbered registers. */
- l32i a7, a2, PT_AREG5
- l32i a11, a2, PT_AREG6
- l32i a15, a2, PT_AREG7
+ l32i a7, a2, PT_AREG7
+ l32i a11, a2, PT_AREG11
+ l32i a15, a2, PT_AREG15
movi a2, 0
rfe
* Note: This frame might be the same as above.
*/
-#ifdef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
- /* Restore registers we precautiously saved.
- * We have the value of the 'right' a3
- */
-
- l32i a7, a2, PT_AREG5
- l32i a11, a2, PT_AREG6
- l32i a15, a2, PT_AREG7
-#endif
-
/* Setup stack pointer. */
addi a2, a2, -PT_USER_SIZE
movi a3, exc_table
rsr a0, EXCCAUSE
- addx4 a0, a0, a3 # find entry in table
- l32i a0, a0, EXC_TABLE_FAST_USER # load handler
- jx a0
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_USER # load handler
+ jx a0
fast_syscall_spill_registers_fixup_return:
s32i a2, a3, EXC_TABLE_PARAM
l32i a2, a3, EXC_TABLE_KSTK
-#ifdef SIGNAL_HANDLING_IN_DOUBLE_EXCEPTION
- /* Save registers again that might be clobbered. */
-
- s32i a7, a2, PT_AREG5
- s32i a11, a2, PT_AREG6
- s32i a15, a2, PT_AREG7
-#endif
-
/* Load WB at the time the exception occurred. */
rsr a3, SAR # WB is still in SAR
* This is not a real function. The following conditions must be met:
*
* - must be called with call0.
- * - uses DEPC, a3 and SAR.
+ * - uses a3, a4 and SAR.
* - the last 'valid' register of each frame are clobbered.
* - the caller must have registered a fixup handler
* (or be inside a critical section)
/*
* Rotate ws so that the current windowbase is at bit 0.
* Assume ws = xxxwww1yy (www1 current window frame).
- * Rotate ws right so that a2 = yyxxxwww1.
+ * Rotate ws right so that a4 = yyxxxwww1.
*/
- wsr a2, DEPC # preserve a2
- rsr a2, WINDOWBASE
- rsr a3, WINDOWSTART
- ssr a2 # holds WB
- slli a2, a3, WSBITS
- or a3, a3, a2 # a2 = xxxwww1yyxxxwww1yy
- srl a3, a3
+ rsr a4, WINDOWBASE
+ rsr a3, WINDOWSTART # a3 = xxxwww1yy
+ ssr a4 # holds WB
+ slli a4, a3, WSBITS
+ or a3, a3, a4 # a3 = xxxwww1yyxxxwww1yy
+ srl a3, a3 # a3 = 00xxxwww1yyxxxwww1
/* We are done if there are no more than the current register frame. */
- extui a3, a3, 1, WSBITS-2 # a3 = 0yyxxxwww
- movi a2, (1 << (WSBITS-1))
+ extui a3, a3, 1, WSBITS-1 # a3 = 0yyxxxwww
+ movi a4, (1 << (WSBITS-1))
_beqz a3, .Lnospill # only one active frame? jump
/* We want 1 at the top, so that we return to the current windowbase */
- or a3, a3, a2 # 1yyxxxwww
+ or a3, a3, a4 # 1yyxxxwww
/* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
wsr a3, WINDOWSTART # save shifted windowstart
- neg a2, a3
- and a3, a2, a3 # first bit set from right: 000010000
+ neg a4, a3
+ and a3, a4, a3 # first bit set from right: 000010000
- ffs_ws a2, a3 # a2: shifts to skip empty frames
+ ffs_ws a4, a3 # a4: shifts to skip empty frames
movi a3, WSBITS
- sub a2, a3, a2 # WSBITS-a2:number of 0-bits from right
- ssr a2 # save in SAR for later.
+ sub a4, a3, a4 # WSBITS-a4:number of 0-bits from right
+ ssr a4 # save in SAR for later.
rsr a3, WINDOWBASE
- add a3, a3, a2
- rsr a2, DEPC # restore a2
+ add a3, a3, a4
wsr a3, WINDOWBASE
rsync
l32e a4, a1, -16
j .Lc12c
+.Lnospill:
+ ret
+
.Lloop: _bbsi.l a3, 1, .Lc4
_bbci.l a3, 2, .Lc12
movi a3, 1
sll a3, a3
wsr a3, WINDOWSTART
-
-.Lnospill:
- jx a0
+ ret
.Lc4: s32e a4, a9, -16
s32e a5, a9, -12
1: j _user_exception
-#if XCHAL_EXTRA_SA_SIZE
-
-#warning fast_coprocessor untested
-
-/*
- * Entry condition:
- *
- * a0: trashed, original value saved on stack (PT_AREG0)
- * a1: a1
- * a2: new stack pointer, original in DEPC
- * a3: dispatch table
- * depc: a2, original value saved on stack (PT_DEPC)
- * excsave_1: a3
- *
- * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
- * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
- */
-
-ENTRY(fast_coprocessor_double)
- wsr a0, EXCSAVE_1
- movi a0, unrecoverable_exception
- callx0 a0
-
-ENTRY(fast_coprocessor)
-
- /* Fatal if we are in a double exception. */
-
- l32i a0, a2, PT_DEPC
- _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_coprocessor_double
-
- /* Save some registers a1, a3, a4, SAR */
-
- xsr a3, EXCSAVE_1
- s32i a3, a2, PT_AREG3
- rsr a3, SAR
- s32i a4, a2, PT_AREG4
- s32i a1, a2, PT_AREG1
- s32i a5, a1, PT_AREG5
- s32i a3, a2, PT_SAR
- mov a1, a2
-
- /* Currently, the HAL macros only guarantee saving a0 and a1.
- * These can and will be refined in the future, but for now,
- * just save the remaining registers of a2...a15.
- */
- s32i a6, a1, PT_AREG6
- s32i a7, a1, PT_AREG7
- s32i a8, a1, PT_AREG8
- s32i a9, a1, PT_AREG9
- s32i a10, a1, PT_AREG10
- s32i a11, a1, PT_AREG11
- s32i a12, a1, PT_AREG12
- s32i a13, a1, PT_AREG13
- s32i a14, a1, PT_AREG14
- s32i a15, a1, PT_AREG15
-
- /* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */
-
- rsr a0, EXCCAUSE
- addi a3, a0, -XCHAL_EXCCAUSE_COPROCESSOR0_DISABLED
-
- /* Set corresponding CPENABLE bit */
-
- movi a4, 1
- ssl a3 # SAR: 32 - coprocessor_number
- rsr a5, CPENABLE
- sll a4, a4
- or a4, a5, a4
- wsr a4, CPENABLE
- rsync
- movi a5, coprocessor_info # list of owner and offset into cp_save
- addx8 a0, a4, a5 # entry for CP
-
- bne a4, a5, .Lload # bit wasn't set before, cp not in use
-
- /* Now compare the current task with the owner of the coprocessor.
- * If they are the same, there is no reason to save or restore any
- * coprocessor state. Having already enabled the coprocessor,
- * branch ahead to return.
- */
- GET_CURRENT(a5,a1)
- l32i a4, a0, COPROCESSOR_INFO_OWNER # a4: current owner for this CP
- beq a4, a5, .Ldone
-
- /* Find location to dump current coprocessor state:
- * task_struct->task_cp_save_offset + coprocessor_offset[coprocessor]
- *
- * Note: a0 pointer to the entry in the coprocessor owner table,
- * a3 coprocessor number,
- * a4 current owner of coprocessor.
- */
- l32i a5, a0, COPROCESSOR_INFO_OFFSET
- addi a2, a4, THREAD_CP_SAVE
- add a2, a2, a5
-
- /* Store current coprocessor states. (a5 still has CP number) */
-
- xchal_cpi_store_funcbody
-
- /* The macro might have destroyed a3 (coprocessor number), but
- * SAR still has 32 - coprocessor_number!
- */
- movi a3, 32
- rsr a4, SAR
- sub a3, a3, a4
-
-.Lload: /* A new task now owns the corpocessors. Save its TCB pointer into
- * the coprocessor owner table.
- *
- * Note: a0 pointer to the entry in the coprocessor owner table,
- * a3 coprocessor number.
- */
- GET_CURRENT(a4,a1)
- s32i a4, a0, 0
-
- /* Find location from where to restore the current coprocessor state.*/
-
- l32i a5, a0, COPROCESSOR_INFO_OFFSET
- addi a2, a4, THREAD_CP_SAVE
- add a2, a2, a4
-
- xchal_cpi_load_funcbody
-
- /* We must assume that the xchal_cpi_store_funcbody macro destroyed
- * registers a2..a15.
- */
-
-.Ldone: l32i a15, a1, PT_AREG15
- l32i a14, a1, PT_AREG14
- l32i a13, a1, PT_AREG13
- l32i a12, a1, PT_AREG12
- l32i a11, a1, PT_AREG11
- l32i a10, a1, PT_AREG10
- l32i a9, a1, PT_AREG9
- l32i a8, a1, PT_AREG8
- l32i a7, a1, PT_AREG7
- l32i a6, a1, PT_AREG6
- l32i a5, a1, PT_AREG5
- l32i a4, a1, PT_AREG4
- l32i a3, a1, PT_AREG3
- l32i a2, a1, PT_AREG2
- l32i a0, a1, PT_AREG0
- l32i a1, a1, PT_AREG1
-
- rfe
-
-#endif /* XCHAL_EXTRA_SA_SIZE */
-
/*
* System Calls.
*
entry a1, 16
- mov a4, a3 # preserve a3
+ mov a12, a2 # preserve 'prev' (a2)
+ mov a13, a3 # and 'next' (a3)
+
+ l32i a4, a2, TASK_THREAD_INFO
+ l32i a5, a3, TASK_THREAD_INFO
+
+ save_xtregs_user a4 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
- s32i a0, a2, THREAD_RA # save return address
- s32i a1, a2, THREAD_SP # save stack pointer
+ s32i a0, a12, THREAD_RA # save return address
+ s32i a1, a12, THREAD_SP # save stack pointer
- /* Disable ints while we manipulate the stack pointer; spill regs. */
+ /* Disable ints while we manipulate the stack pointer. */
- movi a5, (1 << PS_EXCM_BIT) | LOCKLEVEL
- xsr a5, PS
+ movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL
+ xsr a14, PS
rsr a3, EXCSAVE_1
rsync
s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */
- call0 _spill_registers
+ /* Switch CPENABLE */
+
+#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
+ l32i a3, a5, THREAD_CPENABLE
+ xsr a3, CPENABLE
+ s32i a3, a4, THREAD_CPENABLE
+#endif
+
+ /* Flush register file. */
+
+ call0 _spill_registers # destroys a3, a4, and SAR
/* Set kernel stack (and leave critical section)
* Note: It's save to set it here. The stack will not be overwritten
* we return from kernel space.
*/
- l32i a0, a4, TASK_THREAD_INFO
rsr a3, EXCSAVE_1 # exc_table
- movi a1, 0
- addi a0, a0, PT_REGS_OFFSET
- s32i a1, a3, EXC_TABLE_FIXUP
- s32i a0, a3, EXC_TABLE_KSTK
+ movi a6, 0
+ addi a7, a5, PT_REGS_OFFSET
+ s32i a6, a3, EXC_TABLE_FIXUP
+ s32i a7, a3, EXC_TABLE_KSTK
/* restore context of the task that 'next' addresses */
- l32i a0, a4, THREAD_RA /* restore return address */
- l32i a1, a4, THREAD_SP /* restore stack pointer */
+ l32i a0, a13, THREAD_RA # restore return address
+ l32i a1, a13, THREAD_SP # restore stack pointer
+
+ load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
- wsr a5, PS
+ wsr a14, PS
+ mov a2, a12 # return 'prev'
rsync
retw
{
if (size == 0)
return NULL;
- return vmalloc(size);
+ return vmalloc_exec(size);
}
void module_free(struct module *mod, void *module_region)
EXPORT_SYMBOL(pm_power_off);
+#if XTENSA_HAVE_COPROCESSORS
+
+void coprocessor_release_all(struct thread_info *ti)
+{
+ unsigned long cpenable;
+ int i;
+
+ /* Make sure we don't switch tasks during this operation. */
+
+ preempt_disable();
+
+ /* Walk through all cp owners and release it for the requested one. */
+
+ cpenable = ti->cpenable;
+
+ for (i = 0; i < XCHAL_CP_MAX; i++) {
+ if (coprocessor_owner[i] == ti) {
+ coprocessor_owner[i] = 0;
+ cpenable &= ~(1 << i);
+ }
+ }
+
+ ti->cpenable = cpenable;
+ coprocessor_clear_cpenable();
+
+ preempt_enable();
+}
+
+void coprocessor_flush_all(struct thread_info *ti)
+{
+ unsigned long cpenable;
+ int i;
+
+ preempt_disable();
+
+ cpenable = ti->cpenable;
+
+ for (i = 0; i < XCHAL_CP_MAX; i++) {
+ if ((cpenable & 1) != 0 && coprocessor_owner[i] == ti)
+ coprocessor_flush(ti, i);
+ cpenable >>= 1;
+ }
+
+ preempt_enable();
+}
+
+#endif
+
+
/*
* Powermanagement idle function, if any is provided by the platform.
*/
}
/*
- * Free current thread data structures etc..
+ * This is called when the thread calls exit().
*/
-
void exit_thread(void)
{
+#if XTENSA_HAVE_COPROCESSORS
+ coprocessor_release_all(current_thread_info());
+#endif
}
+/*
+ * Flush thread state. This is called when a thread does an execve()
+ * Note that we flush coprocessor registers for the case execve fails.
+ */
void flush_thread(void)
{
+#if XTENSA_HAVE_COPROCESSORS
+ struct thread_info *ti = current_thread_info();
+ coprocessor_flush_all(ti);
+ coprocessor_release_all(ti);
+#endif
+}
+
+/*
+ * This is called before the thread is copied.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+#if XTENSA_HAVE_COPROCESSORS
+ coprocessor_flush_all(task_thread_info(tsk));
+#endif
}
/*
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs *childregs;
+ struct thread_info *ti;
unsigned long tos;
int user_mode = user_mode(regs);
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
p->thread.sp = (unsigned long)childregs;
+
if (user_mode(regs)) {
int len = childregs->wmask & ~0xf;
childregs->areg[1] = usp;
memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
®s->areg[XCHAL_NUM_AREGS - len/4], len);
-
+// FIXME: we need to set THREADPTR in thread_info...
if (clone_flags & CLONE_SETTLS)
childregs->areg[2] = childregs->areg[6];
/* In kernel space, we start a new thread with a new stack. */
childregs->wmask = 1;
}
+
+#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
+ ti = task_thread_info(p);
+ ti->cpenable = 0;
+#endif
+
return 0;
}
}
/*
- * do_copy_regs() gathers information from 'struct pt_regs' and
- * 'current->thread.areg[]' to fill in the xtensa_gregset_t
- * structure.
- *
* xtensa_gregset_t and 'struct pt_regs' are vastly different formats
* of processor registers. Besides different ordering,
* xtensa_gregset_t contains non-live register information that
*
*/
-void do_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs,
- struct task_struct *tsk)
+void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs)
{
- int i, n, wb_offset;
+ unsigned long wb, ws, wm;
+ int live, last;
- elfregs->xchal_config_id0 = XCHAL_HW_CONFIGID0;
- elfregs->xchal_config_id1 = XCHAL_HW_CONFIGID1;
+ wb = regs->windowbase;
+ ws = regs->windowstart;
+ wm = regs->wmask;
+ ws = ((ws >> wb) | (ws << (WSBITS - wb))) & ((1 << WSBITS) - 1);
- __asm__ __volatile__ ("rsr %0, 176\n" : "=a" (i));
- elfregs->cpux = i;
- __asm__ __volatile__ ("rsr %0, 208\n" : "=a" (i));
- elfregs->cpuy = i;
+ /* Don't leak any random bits. */
+
+ memset(elfregs, 0, sizeof (elfregs));
/* Note: PS.EXCM is not set while user task is running; its
* being set in regs->ps is for exception handling convenience.
elfregs->pc = regs->pc;
elfregs->ps = (regs->ps & ~(1 << PS_EXCM_BIT));
- elfregs->exccause = regs->exccause;
- elfregs->excvaddr = regs->excvaddr;
- elfregs->windowbase = regs->windowbase;
- elfregs->windowstart = regs->windowstart;
elfregs->lbeg = regs->lbeg;
elfregs->lend = regs->lend;
elfregs->lcount = regs->lcount;
elfregs->sar = regs->sar;
- elfregs->syscall = regs->syscall;
-
- /* Copy register file.
- * The layout looks like this:
- *
- * | a0 ... a15 | Z ... Z | arX ... arY |
- * current window unused saved frames
- */
-
- memset (elfregs->ar, 0, sizeof(elfregs->ar));
+ elfregs->windowstart = ws;
- wb_offset = regs->windowbase * 4;
- n = (regs->wmask&1)? 4 : (regs->wmask&2)? 8 : (regs->wmask&4)? 12 : 16;
-
- for (i = 0; i < n; i++)
- elfregs->ar[(wb_offset + i) % XCHAL_NUM_AREGS] = regs->areg[i];
-
- n = (regs->wmask >> 4) * 4;
-
- for (i = XCHAL_NUM_AREGS - n; n > 0; i++, n--)
- elfregs->ar[(wb_offset + i) % XCHAL_NUM_AREGS] = regs->areg[i];
+ live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16;
+ last = XCHAL_NUM_AREGS - (wm >> 4) * 4;
+ memcpy(elfregs->a, regs->areg, live * 4);
+ memcpy(elfregs->a + last, regs->areg + last, (wm >> 4) * 16);
}
-void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs)
+int dump_fpu(void)
{
- do_copy_regs ((xtensa_gregset_t *)elfregs, regs, current);
-}
-
-
-/* The inverse of do_copy_regs(). No error or sanity checking. */
-
-void do_restore_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs,
- struct task_struct *tsk)
-{
- int i, n, wb_offset;
-
- /* Note: PS.EXCM is not set while user task is running; it
- * needs to be set in regs->ps is for exception handling convenience.
- */
-
- regs->pc = elfregs->pc;
- regs->ps = (elfregs->ps | (1 << PS_EXCM_BIT));
- regs->exccause = elfregs->exccause;
- regs->excvaddr = elfregs->excvaddr;
- regs->windowbase = elfregs->windowbase;
- regs->windowstart = elfregs->windowstart;
- regs->lbeg = elfregs->lbeg;
- regs->lend = elfregs->lend;
- regs->lcount = elfregs->lcount;
- regs->sar = elfregs->sar;
- regs->syscall = elfregs->syscall;
-
- /* Clear everything. */
-
- memset (regs->areg, 0, sizeof(regs->areg));
-
- /* Copy regs from live window frame. */
-
- wb_offset = regs->windowbase * 4;
- n = (regs->wmask&1)? 4 : (regs->wmask&2)? 8 : (regs->wmask&4)? 12 : 16;
-
- for (i = 0; i < n; i++)
- regs->areg[(wb_offset+i) % XCHAL_NUM_AREGS] = elfregs->ar[i];
-
- n = (regs->wmask >> 4) * 4;
-
- for (i = XCHAL_NUM_AREGS - n; n > 0; i++, n--)
- regs->areg[(wb_offset+i) % XCHAL_NUM_AREGS] = elfregs->ar[i];
-}
-
-/*
- * do_save_fpregs() gathers information from 'struct pt_regs' and
- * 'current->thread' to fill in the elf_fpregset_t structure.
- *
- * Core files and ptrace use elf_fpregset_t.
- */
-
-void do_save_fpregs (elf_fpregset_t *fpregs, struct pt_regs *regs,
- struct task_struct *tsk)
-{
-#if XCHAL_HAVE_CP
-
- extern unsigned char _xtensa_reginfo_tables[];
- extern unsigned _xtensa_reginfo_table_size;
- int i;
- unsigned long flags;
-
- /* Before dumping coprocessor state from memory,
- * ensure any live coprocessor contents for this
- * task are first saved to memory:
- */
- local_irq_save(flags);
-
- for (i = 0; i < XCHAL_CP_MAX; i++) {
- if (tsk == coprocessor_info[i].owner) {
- enable_coprocessor(i);
- save_coprocessor_registers(
- tsk->thread.cp_save+coprocessor_info[i].offset,i);
- disable_coprocessor(i);
- }
- }
-
- local_irq_restore(flags);
-
- /* Now dump coprocessor & extra state: */
- memcpy((unsigned char*)fpregs,
- _xtensa_reginfo_tables, _xtensa_reginfo_table_size);
- memcpy((unsigned char*)fpregs + _xtensa_reginfo_table_size,
- tsk->thread.cp_save, XTENSA_CP_EXTRA_SIZE);
-#endif
-}
-
-/*
- * The inverse of do_save_fpregs().
- * Copies coprocessor and extra state from fpregs into regs and tsk->thread.
- * Returns 0 on success, non-zero if layout doesn't match.
- */
-
-int do_restore_fpregs (elf_fpregset_t *fpregs, struct pt_regs *regs,
- struct task_struct *tsk)
-{
-#if XCHAL_HAVE_CP
-
- extern unsigned char _xtensa_reginfo_tables[];
- extern unsigned _xtensa_reginfo_table_size;
- int i;
- unsigned long flags;
-
- /* Make sure save area layouts match.
- * FIXME: in the future we could allow restoring from
- * a different layout of the same registers, by comparing
- * fpregs' table with _xtensa_reginfo_tables and matching
- * entries and copying registers one at a time.
- * Not too sure yet whether that's very useful.
- */
-
- if( memcmp((unsigned char*)fpregs,
- _xtensa_reginfo_tables, _xtensa_reginfo_table_size) ) {
- return -1;
- }
-
- /* Before restoring coprocessor state from memory,
- * ensure any live coprocessor contents for this
- * task are first invalidated.
- */
-
- local_irq_save(flags);
-
- for (i = 0; i < XCHAL_CP_MAX; i++) {
- if (tsk == coprocessor_info[i].owner) {
- enable_coprocessor(i);
- save_coprocessor_registers(
- tsk->thread.cp_save+coprocessor_info[i].offset,i);
- coprocessor_info[i].owner = 0;
- disable_coprocessor(i);
- }
- }
-
- local_irq_restore(flags);
-
- /* Now restore coprocessor & extra state: */
-
- memcpy(tsk->thread.cp_save,
- (unsigned char*)fpregs + _xtensa_reginfo_table_size,
- XTENSA_CP_EXTRA_SIZE);
-#endif
return 0;
}
-/*
- * Fill in the CP structure for a core dump for a particular task.
- */
-
-int
-dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r)
-{
- return 0; /* no coprocessors active on this processor */
-}
-
-/*
- * Fill in the CP structure for a core dump.
- * This includes any FPU coprocessor.
- * Here, we dump all coprocessors, and other ("extra") custom state.
- *
- * This function is called by elf_core_dump() in fs/binfmt_elf.c
- * (in which case 'regs' comes from calls to do_coredump, see signals.c).
- */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r)
-{
- return dump_task_fpu(regs, current, r);
-}
asmlinkage
long xtensa_clone(unsigned long clone_flags, unsigned long newsp,
}
/*
- * * xtensa_execve() executes a new program.
- * */
+ * xtensa_execve() executes a new program.
+ */
asmlinkage
long xtensa_execve(char __user *name, char __user * __user *argv,
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- // FIXME: release coprocessor??
error = do_execve(filename, argv, envp, regs);
if (error == 0) {
task_lock(current);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
*
* Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
* Chris Zankel <chris@zankel.net>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/elf.h>
-
-#define TEST_KERNEL // verify kernel operations FIXME: remove
-
+#include <asm/coprocessor.h>
/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure single step bits etc are not set.
+ * Called by kernel/ptrace.c when detaching to disable single stepping.
*/
void ptrace_disable(struct task_struct *child)
/* Nothing to do.. */
}
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+int ptrace_getregs(struct task_struct *child, void __user *uregs)
{
- int ret = -EPERM;
+ struct pt_regs *regs = task_pt_regs(child);
+ xtensa_gregset_t __user *gregset = uregs;
+ unsigned long wm = regs->wmask;
+ unsigned long wb = regs->windowbase;
+ int live, i;
+
+ if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t)))
+ return -EIO;
+
+ __put_user(regs->pc, &gregset->pc);
+ __put_user(regs->ps & ~(1 << PS_EXCM_BIT), &gregset->ps);
+ __put_user(regs->lbeg, &gregset->lbeg);
+ __put_user(regs->lend, &gregset->lend);
+ __put_user(regs->lcount, &gregset->lcount);
+ __put_user(regs->windowstart, &gregset->windowstart);
+ __put_user(regs->windowbase, &gregset->windowbase);
+
+ live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16;
+
+ for (i = 0; i < live; i++)
+ __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS));
+ for (i = XCHAL_NUM_AREGS - (wm >> 4) * 4; i < XCHAL_NUM_AREGS; i++)
+ __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS));
+
+ return 0;
+}
- switch (request) {
- case PTRACE_PEEKTEXT: /* read word at location addr. */
- case PTRACE_PEEKDATA:
- ret = generic_ptrace_peekdata(child, addr, data);
- goto out;
+int ptrace_setregs(struct task_struct *child, void __user *uregs)
+{
+ struct pt_regs *regs = task_pt_regs(child);
+ xtensa_gregset_t *gregset = uregs;
+ const unsigned long ps_mask = PS_CALLINC_MASK | PS_OWB_MASK;
+ unsigned long ps;
+ unsigned long wb;
- /* Read the word at location addr in the USER area. */
+ if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t)))
+ return -EIO;
- case PTRACE_PEEKUSR:
- {
- struct pt_regs *regs;
- unsigned long tmp;
+ __get_user(regs->pc, &gregset->pc);
+ __get_user(ps, &gregset->ps);
+ __get_user(regs->lbeg, &gregset->lbeg);
+ __get_user(regs->lend, &gregset->lend);
+ __get_user(regs->lcount, &gregset->lcount);
+ __get_user(regs->windowstart, &gregset->windowstart);
+ __get_user(wb, &gregset->windowbase);
+
+ regs->ps = (regs->ps & ~ps_mask) | (ps & ps_mask) | (1 << PS_EXCM_BIT);
+
+ if (wb >= XCHAL_NUM_AREGS / 4)
+ return -EFAULT;
+
+ regs->windowbase = wb;
+
+ if (wb != 0 && __copy_from_user(regs->areg + XCHAL_NUM_AREGS - wb * 4,
+ gregset->a, wb * 16))
+ return -EFAULT;
+
+ if (__copy_from_user(regs->areg, gregset->a + wb*4, (WSBITS-wb) * 16))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+int ptrace_getxregs(struct task_struct *child, void __user *uregs)
+{
+ struct pt_regs *regs = task_pt_regs(child);
+ struct thread_info *ti = task_thread_info(child);
+ elf_xtregs_t __user *xtregs = uregs;
+ int ret = 0;
+
+ if (!access_ok(VERIFY_WRITE, uregs, sizeof(elf_xtregs_t)))
+ return -EIO;
+
+#if XTENSA_HAVE_COPROCESSORS
+ /* Flush all coprocessor registers to memory. */
+ coprocessor_flush_all(ti);
+ ret |= __copy_to_user(&xtregs->cp0, &ti->xtregs_cp,
+ sizeof(xtregs_coprocessor_t));
+#endif
+ ret |= __copy_to_user(&xtregs->opt, ®s->xtregs_opt,
+ sizeof(xtregs->opt));
+ ret |= __copy_to_user(&xtregs->user,&ti->xtregs_user,
+ sizeof(xtregs->user));
+
+ return ret ? -EFAULT : 0;
+}
+
+int ptrace_setxregs(struct task_struct *child, void __user *uregs)
+{
+ struct thread_info *ti = task_thread_info(child);
+ struct pt_regs *regs = task_pt_regs(child);
+ elf_xtregs_t *xtregs = uregs;
+ int ret = 0;
+
+#if XTENSA_HAVE_COPROCESSORS
+ /* Flush all coprocessors before we overwrite them. */
+ coprocessor_flush_all(ti);
+ coprocessor_release_all(ti);
+
+ ret |= __copy_from_user(&ti->xtregs_cp, &xtregs->cp0,
+ sizeof(xtregs_coprocessor_t));
+#endif
+ ret |= __copy_from_user(®s->xtregs_opt, &xtregs->opt,
+ sizeof(xtregs->opt));
+ ret |= __copy_from_user(&ti->xtregs_user, &xtregs->user,
+ sizeof(xtregs->user));
+
+ return ret ? -EFAULT : 0;
+}
+
+int ptrace_peekusr(struct task_struct *child, long regno, long __user *ret)
+{
+ struct pt_regs *regs;
+ unsigned long tmp;
- regs = task_pt_regs(child);
- tmp = 0; /* Default return value. */
+ regs = task_pt_regs(child);
+ tmp = 0; /* Default return value. */
- switch(addr) {
+ switch(regno) {
case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1:
- {
- int ar = addr - REG_AR_BASE - regs->windowbase * 4;
- ar &= (XCHAL_NUM_AREGS - 1);
- if (ar < 16 && ar + (regs->wmask >> 4) * 4 >= 0)
- tmp = regs->areg[ar];
- else
- ret = -EIO;
+ tmp = regs->areg[regno - REG_AR_BASE];
break;
- }
+
case REG_A_BASE ... REG_A_BASE + 15:
- tmp = regs->areg[addr - REG_A_BASE];
+ tmp = regs->areg[regno - REG_A_BASE];
break;
+
case REG_PC:
tmp = regs->pc;
break;
+
case REG_PS:
/* Note: PS.EXCM is not set while user task is running;
* its being set in regs is for exception handling
* convenience. */
tmp = (regs->ps & ~(1 << PS_EXCM_BIT));
break;
+
case REG_WB:
- tmp = regs->windowbase;
- break;
+ break; /* tmp = 0 */
+
case REG_WS:
- tmp = regs->windowstart;
+ {
+ unsigned long wb = regs->windowbase;
+ unsigned long ws = regs->windowstart;
+ tmp = ((ws>>wb) | (ws<<(WSBITS-wb))) & ((1<<WSBITS)-1);
break;
+ }
case REG_LBEG:
tmp = regs->lbeg;
break;
+
case REG_LEND:
tmp = regs->lend;
break;
+
case REG_LCOUNT:
tmp = regs->lcount;
break;
+
case REG_SAR:
tmp = regs->sar;
break;
- case REG_DEPC:
- tmp = regs->depc;
- break;
- case REG_EXCCAUSE:
- tmp = regs->exccause;
- break;
- case REG_EXCVADDR:
- tmp = regs->excvaddr;
- break;
+
case SYSCALL_NR:
tmp = regs->syscall;
break;
- default:
- tmp = 0;
- ret = -EIO;
- goto out;
- }
- ret = put_user(tmp, (unsigned long *) data);
- goto out;
- }
- case PTRACE_POKETEXT: /* write the word at location addr. */
- case PTRACE_POKEDATA:
- ret = generic_ptrace_pokedata(child, addr, data);
- goto out;
+ default:
+ return -EIO;
+ }
+ return put_user(tmp, ret);
+}
- case PTRACE_POKEUSR:
- {
- struct pt_regs *regs;
- regs = task_pt_regs(child);
+int ptrace_pokeusr(struct task_struct *child, long regno, long val)
+{
+ struct pt_regs *regs;
+ regs = task_pt_regs(child);
- switch (addr) {
+ switch (regno) {
case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1:
- {
- int ar = addr - REG_AR_BASE - regs->windowbase * 4;
- if (ar < 16 && ar + (regs->wmask >> 4) * 4 >= 0)
- regs->areg[ar & (XCHAL_NUM_AREGS - 1)] = data;
- else
- ret = -EIO;
+ regs->areg[regno - REG_AR_BASE] = val;
break;
- }
+
case REG_A_BASE ... REG_A_BASE + 15:
- regs->areg[addr - REG_A_BASE] = data;
+ regs->areg[regno - REG_A_BASE] = val;
break;
+
case REG_PC:
- regs->pc = data;
+ regs->pc = val;
break;
+
case SYSCALL_NR:
- regs->syscall = data;
- break;
-#ifdef TEST_KERNEL
- case REG_WB:
- regs->windowbase = data;
- break;
- case REG_WS:
- regs->windowstart = data;
+ regs->syscall = val;
break;
-#endif
default:
- /* The rest are not allowed. */
- ret = -EIO;
- break;
- }
+ return -EIO;
+ }
+ return 0;
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ int ret = -EPERM;
+
+ switch (request) {
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ case PTRACE_PEEKDATA:
+ ret = generic_ptrace_peekdata(child, addr, data);
+ break;
+
+ case PTRACE_PEEKUSR: /* read register specified by addr. */
+ ret = ptrace_peekusr(child, addr, (void __user *) data);
+ break;
+
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ case PTRACE_POKEDATA:
+ ret = generic_ptrace_pokedata(child, addr, data);
+ break;
+
+ case PTRACE_POKEUSR: /* write register specified by addr. */
+ ret = ptrace_pokeusr(child, addr, data);
break;
- }
/* continue and stop at next (return from) syscall */
+
case PTRACE_SYSCALL:
case PTRACE_CONT: /* restart after signal. */
{
break;
case PTRACE_GETREGS:
- {
- /* 'data' points to user memory in which to write.
- * Mainly due to the non-live register values, we
- * reformat the register values into something more
- * standard. For convenience, we use the handy
- * elf_gregset_t format. */
-
- xtensa_gregset_t format;
- struct pt_regs *regs = task_pt_regs(child);
-
- do_copy_regs (&format, regs, child);
-
- /* Now, copy to user space nice and easy... */
- ret = 0;
- if (copy_to_user((void *)data, &format, sizeof(elf_gregset_t)))
- ret = -EFAULT;
+ ret = ptrace_getregs(child, (void __user *) data);
break;
- }
case PTRACE_SETREGS:
- {
- /* 'data' points to user memory that contains the new
- * values in the elf_gregset_t format. */
-
- xtensa_gregset_t format;
- struct pt_regs *regs = task_pt_regs(child);
-
- if (copy_from_user(&format,(void *)data,sizeof(elf_gregset_t))){
- ret = -EFAULT;
- break;
- }
-
- /* FIXME: Perhaps we want some sanity checks on
- * these user-space values? See ARM version. Are
- * debuggers a security concern? */
-
- do_restore_regs (&format, regs, child);
-
- ret = 0;
- break;
- }
-
- case PTRACE_GETFPREGS:
- {
- /* 'data' points to user memory in which to write.
- * For convenience, we use the handy
- * elf_fpregset_t format. */
-
- elf_fpregset_t fpregs;
- struct pt_regs *regs = task_pt_regs(child);
-
- do_save_fpregs (&fpregs, regs, child);
-
- /* Now, copy to user space nice and easy... */
- ret = 0;
- if (copy_to_user((void *)data, &fpregs, sizeof(elf_fpregset_t)))
- ret = -EFAULT;
-
+ ret = ptrace_setregs(child, (void __user *) data);
break;
- }
-
- case PTRACE_SETFPREGS:
- {
- /* 'data' points to user memory that contains the new
- * values in the elf_fpregset_t format.
- */
- elf_fpregset_t fpregs;
- struct pt_regs *regs = task_pt_regs(child);
- ret = 0;
- if (copy_from_user(&fpregs, (void *)data, sizeof(elf_fpregset_t))) {
- ret = -EFAULT;
- break;
- }
-
- if (do_restore_fpregs (&fpregs, regs, child))
- ret = -EIO;
+ case PTRACE_GETXTREGS:
+ ret = ptrace_getxregs(child, (void __user *) data);
break;
- }
- case PTRACE_GETFPREGSIZE:
- /* 'data' points to 'unsigned long' set to the size
- * of elf_fpregset_t
- */
- ret = put_user(sizeof(elf_fpregset_t), (unsigned long *) data);
+ case PTRACE_SETXTREGS:
+ ret = ptrace_setxregs(child, (void __user *) data);
break;
default:
ret = ptrace_request(child, request, addr, data);
- goto out;
+ break;
}
- out:
+
return ret;
}
extern struct rtc_ops no_rtc_ops;
struct rtc_ops *rtc_ops;
-#ifdef CONFIG_PC_KEYB
-extern struct kbd_ops no_kbd_ops;
-struct kbd_ops *kbd_ops;
-#endif
-
#ifdef CONFIG_BLK_DEV_INITRD
extern void *initrd_start;
extern void *initrd_end;
extern struct task_struct *coproc_owners[];
-extern void release_all_cp (struct task_struct *);
-
struct rt_sigframe
{
struct siginfo info;
struct ucontext uc;
- cp_state_t cpstate;
+ struct {
+ xtregs_opt_t opt;
+ xtregs_user_t user;
+#if XTENSA_HAVE_COPROCESSORS
+ xtregs_coprocessor_t cp;
+#endif
+ } xtregs;
unsigned char retcode[6];
unsigned int window[4];
};
/*
* Flush register windows stored in pt_regs to stack.
* Returns 1 for errors.
- *
- * Note that windowbase, windowstart, and wmask are not updated!
*/
int
base += inc;
}
+ regs->wmask = 1;
+ regs->windowstart = 1 << wb;
+
return 0;
errout:
*/
static int
-setup_sigcontext(struct sigcontext __user *sc, cp_state_t *cpstate,
- struct pt_regs *regs, unsigned long mask)
+setup_sigcontext(struct rt_sigframe __user *frame, struct pt_regs *regs)
{
+ struct sigcontext __user *sc = &frame->uc.uc_mcontext;
+ struct thread_info *ti = current_thread_info();
int err = 0;
#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x)
err |= flush_window_regs_user(regs);
err |= __copy_to_user (sc->sc_a, regs->areg, 16 * 4);
+ err |= __put_user(0, &sc->sc_xtregs);
- // err |= __copy_to_user (sc->sc_a, regs->areg, XCHAL_NUM_AREGS * 4)
+ if (err)
+ return err;
-#if XCHAL_HAVE_CP
-# error Coprocessors unsupported
- err |= save_cpextra(cpstate);
- err |= __put_user(err ? NULL : cpstate, &sc->sc_cpstate);
+#if XTENSA_HAVE_COPROCESSORS
+ coprocessor_flush_all(ti);
+ coprocessor_release_all(ti);
+ err |= __copy_to_user(&frame->xtregs.cp, &ti->xtregs_cp,
+ sizeof (frame->xtregs.cp));
#endif
- /* non-iBCS2 extensions.. */
- err |= __put_user(mask, &sc->oldmask);
+ err |= __copy_to_user(&frame->xtregs.opt, ®s->xtregs_opt,
+ sizeof (xtregs_opt_t));
+ err |= __copy_to_user(&frame->xtregs.user, &ti->xtregs_user,
+ sizeof (xtregs_user_t));
+
+ err |= __put_user(err ? NULL : &frame->xtregs, &sc->sc_xtregs);
return err;
}
static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+restore_sigcontext(struct pt_regs *regs, struct rt_sigframe __user *frame)
{
+ struct sigcontext __user *sc = &frame->uc.uc_mcontext;
+ struct thread_info *ti = current_thread_info();
unsigned int err = 0;
unsigned long ps;
regs->windowbase = 0;
regs->windowstart = 1;
+ regs->syscall = -1; /* disable syscall checks */
+
/* For PS, restore only PS.CALLINC.
* Assume that all other bits are either the same as for the signal
* handler, or the user mode value doesn't matter (e.g. PS.OWB).
err |= __copy_from_user(regs->areg, sc->sc_a, 16 * 4);
-#if XCHAL_HAVE_CP
-# error Coprocessors unsupported
+ if (err)
+ return err;
+
/* The signal handler may have used coprocessors in which
* case they are still enabled. We disable them to force a
* reloading of the original task's CP state by the lazy
* Also, we essentially discard any coprocessor state that the
* signal handler created. */
- if (!err) {
- struct task_struct *tsk = current;
- release_all_cp(tsk);
- err |= __copy_from_user(tsk->thread.cpextra, sc->sc_cpstate,
- XTENSA_CP_EXTRA_SIZE);
- }
+#if XTENSA_HAVE_COPROCESSORS
+ coprocessor_release_all(ti);
+ err |= __copy_from_user(&ti->xtregs_cp, &frame->xtregs.cp,
+ sizeof (frame->xtregs.cp));
#endif
+ err |= __copy_from_user(&ti->xtregs_user, &frame->xtregs.user,
+ sizeof (xtregs_user_t));
+ err |= __copy_from_user(®s->xtregs_opt, &frame->xtregs.opt,
+ sizeof (xtregs_opt_t));
- regs->syscall = -1; /* disable syscall checks */
return err;
}
-
/*
* Do a signal return; undo the signal stack.
*/
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+ if (restore_sigcontext(regs, frame))
goto badframe;
ret = regs->areg[2];
err |= __put_user(sas_ss_flags(regs->areg[1]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->cpstate,
- regs, set->sig[0]);
+ err |= setup_sigcontext(frame, regs);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
- /* Create sys_rt_sigreturn syscall in stack frame */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ ra = (unsigned long)ka->sa.sa_restorer;
+ } else {
- err |= gen_return_code(frame->retcode);
+ /* Create sys_rt_sigreturn syscall in stack frame */
- if (err) {
- goto give_sigsegv;
+ err |= gen_return_code(frame->retcode);
+
+ if (err) {
+ goto give_sigsegv;
+ }
+ ra = (unsigned long) frame->retcode;
}
-
/*
* Create signal handler execution context.
/* Set up a stack frame for a call4
* Note: PS.CALLINC is set to one by start_thread
*/
- ra = (unsigned long) frame->retcode;
regs->areg[4] = (((unsigned long) ra) & 0x3fffffff) | 0x40000000;
regs->areg[6] = (unsigned long) signal;
regs->areg[7] = (unsigned long) &frame->info;
{ EXCCAUSE_STORE_CACHE_ATTRIBUTE, 0, do_page_fault },
{ EXCCAUSE_LOAD_CACHE_ATTRIBUTE, 0, do_page_fault },
/* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */
-#if (XCHAL_CP_MASK & 1)
+#if XTENSA_HAVE_COPROCESSOR(0)
COPROCESSOR(0),
#endif
-#if (XCHAL_CP_MASK & 2)
+#if XTENSA_HAVE_COPROCESSOR(1)
COPROCESSOR(1),
#endif
-#if (XCHAL_CP_MASK & 4)
+#if XTENSA_HAVE_COPROCESSOR(2)
COPROCESSOR(2),
#endif
-#if (XCHAL_CP_MASK & 8)
+#if XTENSA_HAVE_COPROCESSOR(3)
COPROCESSOR(3),
#endif
-#if (XCHAL_CP_MASK & 16)
+#if XTENSA_HAVE_COPROCESSOR(4)
COPROCESSOR(4),
#endif
-#if (XCHAL_CP_MASK & 32)
+#if XTENSA_HAVE_COPROCESSOR(5)
COPROCESSOR(5),
#endif
-#if (XCHAL_CP_MASK & 64)
+#if XTENSA_HAVE_COPROCESSOR(6)
COPROCESSOR(6),
#endif
-#if (XCHAL_CP_MASK & 128)
+#if XTENSA_HAVE_COPROCESSOR(7)
COPROCESSOR(7),
#endif
{ EXCCAUSE_MAPPED_DEBUG, 0, do_debug },
wmask = regs->wmask & ~1;
- for (i = 0; i < 32; i++) {
- if (wmask & (1 << (i / 4)))
- break;
+ for (i = 0; i < 16; i++) {
if ((i % 8) == 0)
printk ("\n" KERN_INFO "a%02d: ", i);
printk("%08lx ", regs->areg[i]);
__init_begin = .;
.init.text : {
_sinittext = .;
- *(.init.literal) INIT_TEXT
+ *(.init.literal) *(.cpuinit.literal)
+ *(.devinit.literal) *(.meminit.literal)
+ INIT_TEXT
_einittext = .;
}
.DoubleExceptionVector.literal);
RELOCATE_ENTRY(_DoubleExceptionVector_text,
.DoubleExceptionVector.text);
+ RELOCATE_ENTRY(_DebugInterruptVector_text,
+ .DebugInterruptVector.text);
__boot_reloc_table_end = ABSOLUTE(.) ;
}
#include <linux/swap.h>
#include <linux/pagemap.h>
-#include <asm/pgtable.h>
#include <asm/bootparam.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
#else
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)
&& (vma->vm_flags & VM_EXEC) != 0) {
- unsigned long vaddr = addr & PAGE_MASK;
- __flush_dcache_page(vaddr);
- __invalidate_icache_page(vaddr);
+ unsigned long paddr = (unsigned long) page_address(page);
+ __flush_dcache_page(paddr);
+ __invalidate_icache_page(paddr);
set_bit(PG_arch_1, &page->flags);
}
#endif
struct kmem_cache *pgtable_cache __read_mostly;
-static void pgd_ctor(void *addr, struct kmem_cache *cache, unsigned long flags)
+static void pgd_ctor(struct kmem_cache *cache, void* addr)
{
pte_t* ptep = (pte_t*)addr;
int i;
ENTRY(__invalidate_icache_page_alias)
entry sp, 16
- addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE)
+ addi a6, a3, (PAGE_KERNEL_EXEC | _PAGE_HW_WRITE)
mov a4, a2
witlb a6, a2
isync
int errno;
+static int __simc (int a, int b, int c, int d, int e, int f) __attribute__((__noinline__));
static int __simc (int a, int b, int c, int d, int e, int f)
{
int ret;
#include <linux/bootmem.h>
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
-#include <linux/timer.h>
#include <linux/platform_device.h>
#include <asm/platform/simcall.h>
static int errno;
+static int __simc (int a, int b, int c, int d, int e, int f) __attribute__((__noinline__));
static int __simc (int a, int b, int c, int d, int e, int f)
{
int ret;
/*
* For the allocated request tables
*/
-struct kmem_cache *request_cachep;
+static struct kmem_cache *request_cachep;
/*
* For queue allocation
rq->nr_hw_segments = 0;
rq->ioprio = 0;
rq->special = NULL;
+ rq->raw_data_len = 0;
rq->buffer = NULL;
rq->tag = -1;
rq->errors = 0;
rq->hard_cur_sectors = rq->current_nr_sectors;
rq->hard_nr_sectors = rq->nr_sectors = bio_sectors(bio);
rq->buffer = bio_data(bio);
+ rq->raw_data_len = bio->bi_size;
rq->data_len = bio->bi_size;
rq->bio = rq->biotail = bio;
static void cfq_dtor(struct io_context *ioc)
{
- struct cfq_io_context *cic[1];
- int r;
+ if (!hlist_empty(&ioc->cic_list)) {
+ struct cfq_io_context *cic;
- /*
- * We don't have a specific key to lookup with, so use the gang
- * lookup to just retrieve the first item stored. The cfq exit
- * function will iterate the full tree, so any member will do.
- */
- r = radix_tree_gang_lookup(&ioc->radix_root, (void **) cic, 0, 1);
- if (r > 0)
- cic[0]->dtor(ioc);
+ cic = list_entry(ioc->cic_list.first, struct cfq_io_context,
+ cic_list);
+ cic->dtor(ioc);
+ }
}
/*
static void cfq_exit(struct io_context *ioc)
{
- struct cfq_io_context *cic[1];
- int r;
-
rcu_read_lock();
- /*
- * See comment for cfq_dtor()
- */
- r = radix_tree_gang_lookup(&ioc->radix_root, (void **) cic, 0, 1);
- rcu_read_unlock();
- if (r > 0)
- cic[0]->exit(ioc);
+ if (!hlist_empty(&ioc->cic_list)) {
+ struct cfq_io_context *cic;
+
+ cic = list_entry(ioc->cic_list.first, struct cfq_io_context,
+ cic_list);
+ cic->exit(ioc);
+ }
+ rcu_read_unlock();
}
/* Called by the exitting task */
ret->nr_batch_requests = 0; /* because this is 0 */
ret->aic = NULL;
INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH);
+ INIT_HLIST_HEAD(&ret->cic_list);
ret->ioc_data = NULL;
}
}
EXPORT_SYMBOL(copy_io_context);
-int __init blk_ioc_init(void)
+static int __init blk_ioc_init(void)
{
iocontext_cachep = kmem_cache_create("blkdev_ioc",
sizeof(struct io_context), 0, SLAB_PANIC, NULL);
rq->biotail->bi_next = bio;
rq->biotail = bio;
+ rq->raw_data_len += bio->bi_size;
rq->data_len += bio->bi_size;
}
return 0;
ubuf += ret;
}
+ /*
+ * __blk_rq_map_user() copies the buffers if starting address
+ * or length isn't aligned. As the copied buffer is always
+ * page aligned, we know that there's enough room for padding.
+ * Extend the last bio and update rq->data_len accordingly.
+ *
+ * On unmap, bio_uncopy_user() will use unmodified
+ * bio_map_data pointed to by bio->bi_private.
+ */
+ if (len & queue_dma_alignment(q)) {
+ unsigned int pad_len = (queue_dma_alignment(q) & ~len) + 1;
+ struct bio *bio = rq->biotail;
+
+ bio->bi_io_vec[bio->bi_vcnt - 1].bv_len += pad_len;
+ bio->bi_size += pad_len;
+ rq->data_len += pad_len;
+ }
+
rq->buffer = rq->data = NULL;
return 0;
unmap_rq:
blk_rq_unmap_user(bio);
+ rq->bio = NULL;
return ret;
}
EXPORT_SYMBOL(blk_rq_map_user);
bvprv = bvec;
} /* segments in rq */
- if (q->dma_drain_size) {
+ if (q->dma_drain_size && q->dma_drain_needed(rq)) {
+ if (rq->cmd_flags & REQ_RW)
+ memset(q->dma_drain_buffer, 0, q->dma_drain_size);
+
sg->page_link &= ~0x02;
sg = sg_next(sg);
sg_set_page(sg, virt_to_page(q->dma_drain_buffer),
((unsigned long)q->dma_drain_buffer) &
(PAGE_SIZE - 1));
nsegs++;
+ rq->data_len += q->dma_drain_size;
}
if (sg)
* blk_queue_dma_drain - Set up a drain buffer for excess dma.
*
* @q: the request queue for the device
+ * @dma_drain_needed: fn which returns non-zero if drain is necessary
* @buf: physically contiguous buffer
* @size: size of the buffer in bytes
*
* device can support otherwise there won't be room for the drain
* buffer.
*/
-int blk_queue_dma_drain(struct request_queue *q, void *buf,
- unsigned int size)
+extern int blk_queue_dma_drain(struct request_queue *q,
+ dma_drain_needed_fn *dma_drain_needed,
+ void *buf, unsigned int size)
{
if (q->max_hw_segments < 2 || q->max_phys_segments < 2)
return -EINVAL;
/* make room for appending the drain */
--q->max_hw_segments;
--q->max_phys_segments;
+ q->dma_drain_needed = dma_drain_needed;
q->dma_drain_buffer = buf;
q->dma_drain_size = size;
}
EXPORT_SYMBOL(blk_queue_update_dma_alignment);
-int __init blk_settings_init(void)
+static int __init blk_settings_init(void)
{
blk_max_low_pfn = max_low_pfn - 1;
blk_max_pfn = max_pfn - 1;
}
if (rq->next_rq) {
- hdr->dout_resid = rq->data_len;
- hdr->din_resid = rq->next_rq->data_len;
+ hdr->dout_resid = rq->raw_data_len;
+ hdr->din_resid = rq->next_rq->raw_data_len;
blk_rq_unmap_user(bidi_bio);
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
- hdr->din_resid = rq->data_len;
+ hdr->din_resid = rq->raw_data_len;
else
- hdr->dout_resid = rq->data_len;
+ hdr->dout_resid = rq->raw_data_len;
/*
* If the request generated a negative error number, return it
/*
* Call func for each cic attached to this ioc. Returns number of cic's seen.
*/
-#define CIC_GANG_NR 16
static unsigned int
call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
{
- struct cfq_io_context *cics[CIC_GANG_NR];
- unsigned long index = 0;
- unsigned int called = 0;
- int nr;
+ struct cfq_io_context *cic;
+ struct hlist_node *n;
+ int called = 0;
rcu_read_lock();
-
- do {
- int i;
-
- /*
- * Perhaps there's a better way - this just gang lookups from
- * 0 to the end, restarting after each CIC_GANG_NR from the
- * last key + 1.
- */
- nr = radix_tree_gang_lookup(&ioc->radix_root, (void **) cics,
- index, CIC_GANG_NR);
- if (!nr)
- break;
-
- called += nr;
- index = 1 + (unsigned long) cics[nr - 1]->key;
-
- for (i = 0; i < nr; i++)
- func(ioc, cics[i]);
- } while (nr == CIC_GANG_NR);
-
+ hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) {
+ func(ioc, cic);
+ called++;
+ }
rcu_read_unlock();
return called;
spin_lock_irqsave(&ioc->lock, flags);
radix_tree_delete(&ioc->radix_root, cic->dead_key);
+ hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
kmem_cache_free(cfq_ioc_pool, cic);
if (cic) {
cic->last_end_request = jiffies;
INIT_LIST_HEAD(&cic->queue_list);
+ INIT_HLIST_NODE(&cic->cic_list);
cic->dtor = cfq_free_io_context;
cic->exit = cfq_exit_io_context;
elv_ioc_count_inc(ioc_count);
rcu_assign_pointer(ioc->ioc_data, NULL);
radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
+ hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
cfq_cic_free(cic);
spin_lock_irqsave(&ioc->lock, flags);
ret = radix_tree_insert(&ioc->radix_root,
(unsigned long) cfqd, cic);
+ if (!ret)
+ hlist_add_head_rcu(&cic->cic_list, &ioc->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
radix_tree_preload_end();
spin_lock(&elv_list_lock);
e = elevator_find(name);
+ if (!e) {
+ char elv[ELV_NAME_MAX + strlen("-iosched")];
+
+ spin_unlock(&elv_list_lock);
+
+ if (!strcmp(name, "anticipatory"))
+ sprintf(elv, "as-iosched");
+ else
+ sprintf(elv, "%s-iosched", name);
+
+ request_module(elv);
+ spin_lock(&elv_list_lock);
+ e = elevator_find(name);
+ }
+
if (e && !try_module_get(e->elevator_owner))
e = NULL;
hdr->info = 0;
if (hdr->masked_status || hdr->host_status || hdr->driver_status)
hdr->info |= SG_INFO_CHECK;
- hdr->resid = rq->data_len;
+ hdr->resid = rq->raw_data_len;
hdr->sb_len_wr = 0;
if (rq->sense_len && hdr->sbp) {
rq = blk_get_request(q, WRITE, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->data = NULL;
+ rq->raw_data_len = 0;
rq->data_len = 0;
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
memset(rq->cmd, 0, sizeof(rq->cmd));
struct ahci_port_priv *pp;
void *mem;
dma_addr_t mem_dma;
- int rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem)
struct ata_port *ap = qc->ap;
struct scatterlist *sg = qc->sg;
int dir = qc->dma_dir;
- void *pad_buf = NULL;
WARN_ON(sg == NULL);
- VPRINTK("unmapping %u sg elements\n", qc->mapped_n_elem);
+ VPRINTK("unmapping %u sg elements\n", qc->n_elem);
- /* if we padded the buffer out to 32-bit bound, and data
- * xfer direction is from-device, we must copy from the
- * pad buffer back into the supplied buffer
- */
- if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
- pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
-
- if (qc->mapped_n_elem)
- dma_unmap_sg(ap->dev, sg, qc->mapped_n_elem, dir);
- /* restore last sg */
- if (qc->last_sg)
- *qc->last_sg = qc->saved_last_sg;
- if (pad_buf) {
- struct scatterlist *psg = &qc->extra_sg[1];
- void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
- memcpy(addr + psg->offset, pad_buf, qc->pad_len);
- kunmap_atomic(addr, KM_IRQ0);
- }
+ if (qc->n_elem)
+ dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
}
/**
- * atapi_qc_may_overflow - Check whether data transfer may overflow
- * @qc: ATA command in question
- *
- * ATAPI commands which transfer variable length data to host
- * might overflow due to application error or hardare bug. This
- * function checks whether overflow should be drained and ignored
- * for @qc.
- *
- * LOCKING:
- * None.
- *
- * RETURNS:
- * 1 if @qc may overflow; otherwise, 0.
- */
-static int atapi_qc_may_overflow(struct ata_queued_cmd *qc)
-{
- if (qc->tf.protocol != ATAPI_PROT_PIO &&
- qc->tf.protocol != ATAPI_PROT_DMA)
- return 0;
-
- if (qc->tf.flags & ATA_TFLAG_WRITE)
- return 0;
-
- switch (qc->cdb[0]) {
- case READ_10:
- case READ_12:
- case WRITE_10:
- case WRITE_12:
- case GPCMD_READ_CD:
- case GPCMD_READ_CD_MSF:
- return 0;
- }
-
- return 1;
-}
-
-/**
* ata_std_qc_defer - Check whether a qc needs to be deferred
* @qc: ATA command in question
*
qc->cursg = qc->sg;
}
-static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc,
- unsigned int *n_elem_extra,
- unsigned int *nbytes_extra)
-{
- struct ata_port *ap = qc->ap;
- unsigned int n_elem = qc->n_elem;
- struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL;
-
- *n_elem_extra = 0;
- *nbytes_extra = 0;
-
- /* needs padding? */
- qc->pad_len = qc->nbytes & 3;
-
- if (likely(!qc->pad_len))
- return n_elem;
-
- /* locate last sg and save it */
- lsg = sg_last(qc->sg, n_elem);
- qc->last_sg = lsg;
- qc->saved_last_sg = *lsg;
-
- sg_init_table(qc->extra_sg, ARRAY_SIZE(qc->extra_sg));
-
- if (qc->pad_len) {
- struct scatterlist *psg = &qc->extra_sg[1];
- void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
- unsigned int offset;
-
- WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
-
- memset(pad_buf, 0, ATA_DMA_PAD_SZ);
-
- /* psg->page/offset are used to copy to-be-written
- * data in this function or read data in ata_sg_clean.
- */
- offset = lsg->offset + lsg->length - qc->pad_len;
- sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT),
- qc->pad_len, offset_in_page(offset));
-
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
- memcpy(pad_buf, addr + psg->offset, qc->pad_len);
- kunmap_atomic(addr, KM_IRQ0);
- }
-
- sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
- sg_dma_len(psg) = ATA_DMA_PAD_SZ;
-
- /* Trim the last sg entry and chain the original and
- * padding sg lists.
- *
- * Because chaining consumes one sg entry, one extra
- * sg entry is allocated and the last sg entry is
- * copied to it if the length isn't zero after padded
- * amount is removed.
- *
- * If the last sg entry is completely replaced by
- * padding sg entry, the first sg entry is skipped
- * while chaining.
- */
- lsg->length -= qc->pad_len;
- if (lsg->length) {
- copy_lsg = &qc->extra_sg[0];
- tsg = &qc->extra_sg[0];
- } else {
- n_elem--;
- tsg = &qc->extra_sg[1];
- }
-
- esg = &qc->extra_sg[1];
-
- (*n_elem_extra)++;
- (*nbytes_extra) += 4 - qc->pad_len;
- }
-
- if (copy_lsg)
- sg_set_page(copy_lsg, sg_page(lsg), lsg->length, lsg->offset);
-
- sg_chain(lsg, 1, tsg);
- sg_mark_end(esg);
-
- /* sglist can't start with chaining sg entry, fast forward */
- if (qc->sg == lsg) {
- qc->sg = tsg;
- qc->cursg = tsg;
- }
-
- return n_elem;
-}
-
/**
* ata_sg_setup - DMA-map the scatter-gather table associated with a command.
* @qc: Command with scatter-gather table to be mapped.
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- unsigned int n_elem, n_elem_extra, nbytes_extra;
+ unsigned int n_elem;
VPRINTK("ENTER, ata%u\n", ap->print_id);
- n_elem = ata_sg_setup_extra(qc, &n_elem_extra, &nbytes_extra);
+ n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
+ if (n_elem < 1)
+ return -1;
- if (n_elem) {
- n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir);
- if (n_elem < 1) {
- /* restore last sg */
- if (qc->last_sg)
- *qc->last_sg = qc->saved_last_sg;
- return -1;
- }
- DPRINTK("%d sg elements mapped\n", n_elem);
- }
+ DPRINTK("%d sg elements mapped\n", n_elem);
- qc->n_elem = qc->mapped_n_elem = n_elem;
- qc->n_elem += n_elem_extra;
- qc->nbytes += nbytes_extra;
+ qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
return 0;
*/
static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
{
- int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ;
struct ata_port *ap = qc->ap;
- struct ata_eh_info *ehi = &qc->dev->link->eh_info;
+ struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
struct scatterlist *sg;
struct page *page;
unsigned char *buf;
- unsigned int offset, count;
+ unsigned int offset, count, consumed;
next_sg:
sg = qc->cursg;
if (unlikely(!sg)) {
- /*
- * The end of qc->sg is reached and the device expects
- * more data to transfer. In order not to overrun qc->sg
- * and fulfill length specified in the byte count register,
- * - for read case, discard trailing data from the device
- * - for write case, padding zero data to the device
- */
- u16 pad_buf[1] = { 0 };
- unsigned int i;
-
- if (bytes > qc->curbytes - qc->nbytes + ATAPI_MAX_DRAIN) {
- ata_ehi_push_desc(ehi, "too much trailing data "
- "buf=%u cur=%u bytes=%u",
- qc->nbytes, qc->curbytes, bytes);
- return -1;
- }
-
- /* overflow is exptected for misc ATAPI commands */
- if (bytes && !atapi_qc_may_overflow(qc))
- ata_dev_printk(qc->dev, KERN_WARNING, "ATAPI %u bytes "
- "trailing data (cdb=%02x nbytes=%u)\n",
- bytes, qc->cdb[0], qc->nbytes);
-
- for (i = 0; i < (bytes + 1) / 2; i++)
- ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write);
-
- qc->curbytes += bytes;
-
- return 0;
+ ata_ehi_push_desc(ehi, "unexpected or too much trailing data "
+ "buf=%u cur=%u bytes=%u",
+ qc->nbytes, qc->curbytes, bytes);
+ return -1;
}
page = sg_page(sg);
buf = kmap_atomic(page, KM_IRQ0);
/* do the actual data transfer */
- ap->ops->data_xfer(qc->dev, buf + offset, count, do_write);
+ consumed = ap->ops->data_xfer(dev, buf + offset, count, rw);
kunmap_atomic(buf, KM_IRQ0);
local_irq_restore(flags);
} else {
buf = page_address(page);
- ap->ops->data_xfer(qc->dev, buf + offset, count, do_write);
+ consumed = ap->ops->data_xfer(dev, buf + offset, count, rw);
}
- bytes -= count;
- if ((count & 1) && bytes)
- bytes--;
+ bytes -= min(bytes, consumed);
qc->curbytes += count;
qc->cursg_ofs += count;
qc->cursg_ofs = 0;
}
+ /* consumed can be larger than count only for the last transfer */
+ WARN_ON(qc->cursg && count != consumed);
+
if (bytes)
goto next_sg;
-
return 0;
}
{
struct ata_port *ap = qc->ap;
struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
unsigned int ireason, bc_lo, bc_hi, bytes;
int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
/* shall be cleared to zero, indicating xfer of data */
if (unlikely(ireason & (1 << 0)))
- goto err_out;
+ goto atapi_check;
/* make sure transfer direction matches expected */
i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
if (unlikely(do_write != i_write))
- goto err_out;
+ goto atapi_check;
if (unlikely(!bytes))
- goto err_out;
+ goto atapi_check;
VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
- if (__atapi_pio_bytes(qc, bytes))
+ if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
ata_altstatus(ap); /* flush */
return;
-err_out:
- ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n");
+ atapi_check:
+ ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)",
+ ireason, bytes);
+ err_out:
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
}
*/
BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes));
- /* ata_sg_setup() may update nbytes */
- qc->raw_nbytes = qc->nbytes;
-
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
(ap->flags & ATA_FLAG_PIO_DMA)))
if (ata_sg_setup(qc))
int ata_port_start(struct ata_port *ap)
{
struct device *dev = ap->dev;
- int rc;
ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
GFP_KERNEL);
if (!ap->prd)
return -ENOMEM;
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
- DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd,
- (unsigned long long)ap->prd_dma);
return 0;
}
sdev->max_device_blocked = 1;
}
-static void ata_scsi_dev_config(struct scsi_device *sdev,
- struct ata_device *dev)
+/**
+ * atapi_drain_needed - Check whether data transfer may overflow
+ * @request: request to be checked
+ *
+ * ATAPI commands which transfer variable length data to host
+ * might overflow due to application error or hardare bug. This
+ * function checks whether overflow should be drained and ignored
+ * for @request.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if ; otherwise, 0.
+ */
+static int atapi_drain_needed(struct request *rq)
+{
+ if (likely(!blk_pc_request(rq)))
+ return 0;
+
+ if (!rq->data_len || (rq->cmd_flags & REQ_RW))
+ return 0;
+
+ return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC;
+}
+
+static int ata_scsi_dev_config(struct scsi_device *sdev,
+ struct ata_device *dev)
{
/* configure max sectors */
blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
- /* SATA DMA transfers must be multiples of 4 byte, so
- * we need to pad ATAPI transfers using an extra sg.
- * Decrement max hw segments accordingly.
- */
if (dev->class == ATA_DEV_ATAPI) {
struct request_queue *q = sdev->request_queue;
- blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
+ void *buf;
/* set the min alignment */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
- } else
+
+ /* configure draining */
+ buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
+ if (!buf) {
+ ata_dev_printk(dev, KERN_ERR,
+ "drain buffer allocation failed\n");
+ return -ENOMEM;
+ }
+
+ blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
+ } else {
/* ATA devices must be sector aligned */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_SECT_SIZE - 1);
-
- if (dev->class == ATA_DEV_ATA)
sdev->manage_start_stop = 1;
+ }
if (dev->flags & ATA_DFLAG_AN)
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
depth = min(ATA_MAX_QUEUE - 1, depth);
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
}
+
+ return 0;
}
/**
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
+ int rc = 0;
ata_scsi_sdev_config(sdev);
if (dev)
- ata_scsi_dev_config(sdev, dev);
+ rc = ata_scsi_dev_config(sdev, dev);
- return 0;
+ return rc;
}
/**
void ata_scsi_slave_destroy(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct request_queue *q = sdev->request_queue;
unsigned long flags;
struct ata_device *dev;
ata_port_schedule_eh(ap);
}
spin_unlock_irqrestore(ap->lock, flags);
+
+ kfree(q->dma_drain_buffer);
+ q->dma_drain_buffer = NULL;
+ q->dma_drain_size = 0;
}
/**
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(qc->nbytes, (unsigned int)63 * 1024);
+ nbytes = min(scmd->request->raw_data_len, (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
* @ap: Port to initialize
*
* Called just after data structures for each port are
- * initialized. Allocates DMA pad.
+ * initialized.
*
* May be used as the port_start() entry in ata_port_operations.
*
*/
int ata_sas_port_start(struct ata_port *ap)
{
- return ata_pad_alloc(ap, ap->dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(ata_sas_port_start);
* ata_port_stop - Undo ata_sas_port_start()
* @ap: Port to shut down
*
- * Frees the DMA pad.
- *
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
void ata_sas_port_stop(struct ata_port *ap)
{
- ata_pad_free(ap, ap->dev);
}
EXPORT_SYMBOL_GPL(ata_sas_port_stop);
}
-static int pata_icside_port_start(struct ata_port *ap)
-{
- /* No PRD to alloc */
- return ata_pad_alloc(ap, ap->dev);
-}
-
static struct scsi_host_template pata_icside_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.irq_clear = ata_dummy_noret,
.irq_on = ata_irq_on,
- .port_start = pata_icside_port_start,
-
.bmdma_stop = pata_icside_bmdma_stop,
.bmdma_status = pata_icside_bmdma_status,
};
if (!pp)
return -ENOMEM;
- /*
- * allocate per command dma alignment pad buffer, which is used
- * internally by libATA to ensure that all transfers ending on
- * unaligned boundaries are padded, to align on Dword boundaries
- */
- retval = ata_pad_alloc(ap, dev);
- if (retval) {
- kfree(pp);
- return retval;
- }
-
mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem) {
- ata_pad_free(ap, dev);
kfree(pp);
return -ENOMEM;
}
dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
pp->cmdslot, pp->cmdslot_paddr);
- ata_pad_free(ap, dev);
kfree(pp);
}
struct mv_port_priv *pp;
void __iomem *port_mmio = mv_ap_base(ap);
unsigned long flags;
- int tag, rc;
+ int tag;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
ap->private_data = pp;
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
if (!pp->crqb)
return -ENOMEM;
union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
dma_addr_t cb_dma;
- int rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
memset(cb, 0, cb_size);
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
pp->cmd_block = cb;
pp->cmd_block_dma = cb_dma;
mthca_table_put(dev, dev->mr_table.mpt_table, key);
err_out_mpt_free:
- mthca_free(&dev->mr_table.mpt_alloc, mr->ibmr.lkey);
+ mthca_free(&dev->mr_table.mpt_alloc, key);
return err;
}
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_cm_rx *p;
unsigned long begin;
- LIST_HEAD(list);
int ret;
if (!IPOIB_CM_SUPPORTED(dev->dev_addr) || !priv->cm.id)
/*
* assume the HW is wedged and just free up everything.
*/
- list_splice_init(&priv->cm.rx_flush_list, &list);
- list_splice_init(&priv->cm.rx_error_list, &list);
- list_splice_init(&priv->cm.rx_drain_list, &list);
+ list_splice_init(&priv->cm.rx_flush_list,
+ &priv->cm.rx_reap_list);
+ list_splice_init(&priv->cm.rx_error_list,
+ &priv->cm.rx_reap_list);
+ list_splice_init(&priv->cm.rx_drain_list,
+ &priv->cm.rx_reap_list);
break;
}
spin_unlock_irq(&priv->lock);
* information for a retry or there was no other
* mirror in-sync.
*/
- DMERR_LIMIT("Mirror read failed from %s.",
- m->dev->name);
+ DMERR_LIMIT("Mirror read failed.");
return -EIO;
}
+
+ m = read_record->m;
+
DMERR("Mirror read failed from %s. Trying alternative device.",
m->dev->name);
- m = read_record->m;
fail_mirror(m, DM_RAID1_READ_ERROR);
/*
int stat_offset;
};
-#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
+#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \
offsetof(struct e1000_adapter, m)
static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(stats.gprc) },
printk("%s\n", print_mac(mac, netdev->dev_addr));
+ if (adapter->hw.bus_type == e1000_bus_type_pci_express) {
+ DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
+ "longer be supported by this driver in the future.\n",
+ pdev->vendor, pdev->device);
+ DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
+ "driver instead.\n");
+ }
+
/* reset the hardware with the new settings */
e1000_reset(adapter);
}
}
-static void e1000_release_manageability(struct e1000_adapter *adapter)
-{
- if (adapter->flags & FLAG_MNG_PT_ENABLED) {
- struct e1000_hw *hw = &adapter->hw;
-
- u32 manc = er32(MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
- ew32(MANC, manc);
- }
-}
-
/**
* @e1000_alloc_ring - allocate memory for a ring structure
**/
manc = er32(MANC);
- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host. this will probably
* generate destination unreachable messages from the host OS, but
* the packets will be handled on SMBUS */
else
rctl |= E1000_RCTL_LPE;
+ /* Enable hardware CRC frame stripping */
+ rctl |= E1000_RCTL_SECRC;
+
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
-
- /* Enable hardware CRC frame stripping */
- rctl |= E1000_RCTL_SECRC;
psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
u16 mii_reg;
/* WoL is enabled */
- if (!adapter->wol)
+ if (adapter->wol)
return;
/* non-copper PHY? */
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
}
-
- e1000_release_manageability(adapter);
}
int e1000e_up(struct e1000_adapter *adapter)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- e1000_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->flags & FLAG_MNG_PT_ENABLED) {
pci_enable_wake(pdev, PCI_D3hot, 1);
flush_scheduled_work();
- e1000_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
static void gfar_configure_serdes(struct net_device *dev);
-extern int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value);
-extern int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum);
+extern int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value);
+extern int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum);
#ifdef CONFIG_GFAR_NAPI
static int gfar_poll(struct napi_struct *napi, int budget);
#endif
* the local mdio pins, which may not be the same as system mdio bus, used for
* controlling the external PHYs, for example.
*/
-int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
+int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
int regnum, u16 value)
{
/* Set the PHY address and the register address we want to write */
* and are always tied to the local mdio pins, which may not be the
* same as system mdio bus, used for controlling the external PHYs, for eg.
*/
-int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum)
+int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum)
{
u16 value;
*ax->rbuff &= ~0x20;
}
}
- spin_unlock_bh(&ax->buflock);
count = ax->rcount;
printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n",
ax->dev->name);
ax->stats.rx_dropped++;
+ spin_unlock_bh(&ax->buflock);
return;
}
- spin_lock_bh(&ax->buflock);
memcpy(skb_put(skb,count), ax->rbuff, count);
- spin_unlock_bh(&ax->buflock);
skb->protocol = ax25_type_trans(skb, ax->dev);
netif_rx(skb);
ax->dev->last_rx = jiffies;
ax->stats.rx_packets++;
ax->stats.rx_bytes += count;
+ spin_unlock_bh(&ax->buflock);
}
static void kiss_unesc(struct mkiss *ax, unsigned char s)
int stat_offset;
};
-#define IGB_STAT(m) sizeof(((struct igb_adapter *)0)->m), \
+#define IGB_STAT(m) FIELD_SIZEOF(struct igb_adapter, m), \
offsetof(struct igb_adapter, m)
static const struct igb_stats igb_gstrings_stats[] = {
{ "rx_packets", IGB_STAT(stats.gprc) },
u32 manc2h = rd32(E1000_MANC2H);
u32 manc = rd32(E1000_MANC);
- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host */
/* this will probably generate destination unreachable messages
* from the host OS, but the packets will be handled on SMBUS */
}
}
-static void igb_release_manageability(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->en_mng_pt) {
- u32 manc = rd32(E1000_MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
-
- /* XXX stop the hardware watchdog ? */
- wr32(E1000_MANC, manc);
- }
-}
-
/**
* igb_configure - configure the hardware for RX and TX
* @adapter: private board structure
igb_reset_adaptive(&adapter->hw);
adapter->hw.phy.ops.get_phy_info(&adapter->hw);
- igb_release_manageability(adapter);
}
/**
flush_scheduled_work();
-
- igb_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
igb_release_hw_control(adapter);
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- igb_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->en_mng_pt) {
pci_enable_wake(pdev, PCI_D3hot, 1);
int stat_offset;
};
-#define IXGB_STAT(m) sizeof(((struct ixgb_adapter *)0)->m), \
+#define IXGB_STAT(m) FIELD_SIZEOF(struct ixgb_adapter, m), \
offsetof(struct ixgb_adapter, m)
static struct ixgb_stats ixgb_gstrings_stats[] = {
{"rx_packets", IXGB_STAT(net_stats.rx_packets)},
tx_ring->stats.bytes += tx_buffer_info->length;
if (cleaned) {
struct sk_buff *skb = tx_buffer_info->skb;
-#ifdef NETIF_F_TSO
unsigned int segs, bytecount;
segs = skb_shinfo(skb)->gso_segs ?: 1;
/* multiply data chunks by size of headers */
skb->len;
total_tx_packets += segs;
total_tx_bytes += bytecount;
-#else
- total_tx_packets++;
- total_tx_bytes += skb->len;
-#endif
}
ixgbe_unmap_and_free_tx_resource(adapter,
tx_buffer_info);
int err;
u32 num_rx_queues = adapter->num_rx_queues;
+ /* disallow open during test */
+ if (test_bit(__IXGBE_TESTING, &adapter->state))
+ return -EBUSY;
+
try_intr_reinit:
/* allocate transmit descriptors */
err = ixgbe_setup_all_tx_resources(adapter);
IXGBE_ADVTXD_DTYP_CTXT);
if (skb->ip_summed == CHECKSUM_PARTIAL) {
- if (skb->protocol == htons(ETH_P_IP))
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_IP):
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ break;
+
+ case __constant_htons(ETH_P_IPV6):
+ /* XXX what about other V6 headers?? */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ break;
- if (skb->sk->sk_protocol == IPPROTO_TCP)
- type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ default:
+ if (unlikely(net_ratelimit())) {
+ DPRINTK(PROBE, WARNING,
+ "partial checksum but proto=%x!\n",
+ skb->protocol);
+ }
+ break;
+ }
}
context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
hw->mac.type, hw->phy.type,
(part_num >> 8), (part_num & 0xff));
+ if (link_width <= IXGBE_PCI_LINK_WIDTH_4) {
+ dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
+ "this card is not sufficient for optimal "
+ "performance.\n");
+ dev_warn(&pdev->dev, "For optimal performance a x8 "
+ "PCI-Express slot is required.\n");
+ }
+
/* reset the hardware with the new settings */
ixgbe_start_hw(hw);
#define DRV_MODULE_NAME "niu"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "0.6"
-#define DRV_MODULE_RELDATE "January 5, 2008"
+#define DRV_MODULE_VERSION "0.7"
+#define DRV_MODULE_RELDATE "February 18, 2008"
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
index++;
}
} else {
- for (i = 0; i < niu_num_alt_addr(np); i++) {
+ int alt_start;
+ if (np->flags & NIU_FLAGS_XMAC)
+ alt_start = 0;
+ else
+ alt_start = 1;
+ for (i = alt_start; i < niu_num_alt_addr(np); i++) {
err = niu_enable_alt_mac(np, i, 0);
if (err)
printk(KERN_WARNING PFX "%s: Error %d "
/* Read the station address from the CIS. It is stored as the last
(fourth) string in the Version 1 Version/ID tuple. */
- if (link->prod_id[3]) {
- station_addr = link->prod_id[3];
+ tuple->DesiredTuple = CISTPL_VERS_1;
+ if (first_tuple(link, tuple, parse) != CS_SUCCESS) {
+ rc = -1;
+ goto free_cfg_mem;
+ }
+ /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
+ if (next_tuple(link, tuple, parse) != CS_SUCCESS)
+ first_tuple(link, tuple, parse);
+ if (parse->version_1.ns > 3) {
+ station_addr = parse->version_1.str + parse->version_1.ofs[3];
if (cvt_ascii_address(dev, station_addr) == 0) {
rc = 0;
goto free_cfg_mem;
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
u32 speed;
unsigned long flags;
- /* Do a dummy read, as for some reason the first read
- * after a link becomes up returns link down, even if
- * it's been a while since the link came up.
- */
-
spin_lock_irqsave(&phy_lock, flags);
if (!data->phy_ok)
goto out;
- tsi108_read_mii(data, MII_BMSR);
-
duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media);
data->init_media = 0;
TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
+ }
- if (data->link_up == 0) {
- /* The manual says it can take 3-4 usecs for the speed change
- * to take effect.
- */
- udelay(5);
+ if (data->link_up == 0) {
+ /* The manual says it can take 3-4 usecs for the speed change
+ * to take effect.
+ */
+ udelay(5);
- spin_lock(&data->txlock);
- if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
- netif_wake_queue(dev);
+ spin_lock(&data->txlock);
+ if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
+ netif_wake_queue(dev);
- data->link_up = 1;
- spin_unlock(&data->txlock);
- }
+ data->link_up = 1;
+ spin_unlock(&data->txlock);
}
-
} else {
if (data->link_up == 1) {
netif_stop_queue(dev);
* PHY_STAT register before the link up status bit is set.
*/
- data->link_up = 1;
+ data->link_up = 0;
while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
BMSR_LSTATUS)) {
if (i++ > (MII_READ_DELAY / 10)) {
- data->link_up = 0;
break;
}
spin_unlock_irqrestore(&phy_lock, flags);
spin_lock_irqsave(&phy_lock, flags);
}
+ data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
data->phy_ok = 1;
data->init_media = 1;
TSI_WRITE(TSI108_EC_INTMASK, ~0);
}
+static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_gset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
+static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_sset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct tsi108_prv_data *data = netdev_priv(dev);
+ if (!netif_running(dev))
+ return -EINVAL;
return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
}
+static const struct ethtool_ops tsi108_ethtool_ops = {
+ .get_link = ethtool_op_get_link,
+ .get_settings = tsi108_get_settings,
+ .set_settings = tsi108_set_settings,
+};
+
static int
tsi108_init_one(struct platform_device *pdev)
{
data->mii_if.phy_id = einfo->phy;
data->mii_if.phy_id_mask = 0x1f;
data->mii_if.reg_num_mask = 0x1f;
- data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
data->phy = einfo->phy;
data->phy_type = einfo->phy_type;
dev->get_stats = tsi108_get_stats;
netif_napi_add(dev, &data->napi, tsi108_poll, 64);
dev->do_ioctl = tsi108_do_ioctl;
+ dev->ethtool_ops = &tsi108_ethtool_ops;
/* Apparently, the Linux networking code won't use scatter-gather
* if the hardware doesn't do checksums. However, it's faster
goto register_fail;
}
+ platform_set_drvdata(pdev, dev);
printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n",
dev->name, print_mac(mac, dev->dev_addr));
#ifdef DEBUG
if (ctl->flags & IEEE80211_TXCTL_NO_ACK)
flags |= AR5K_TXDESC_NOACK;
- pktlen = skb->len + FCS_LEN;
+ pktlen = skb->len;
if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) {
keyidx = ctl->key_idx;
}
ds->ds_data = bf->skbaddr;
- ret = ah->ah_setup_tx_desc(ah, ds, skb->len + FCS_LEN,
+ ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
ieee80211_get_hdrlen_from_skb(skb),
AR5K_PKT_TYPE_BEACON, (ctl->power_level * 2), ctl->tx_rate, 1,
AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0);
{
u32 frame_type;
struct ath5k_hw_2w_tx_desc *tx_desc;
- unsigned int buff_len;
+ unsigned int frame_len;
tx_desc = (struct ath5k_hw_2w_tx_desc *)&desc->ds_ctl0;
/* Setup control descriptor */
/* Verify and set frame length */
- if (pkt_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+ if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
return -EINVAL;
- tx_desc->tx_control_0 = pkt_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+ tx_desc->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
/* Verify and set buffer length */
- buff_len = pkt_len - FCS_LEN;
/* NB: beacon's BufLen must be a multiple of 4 bytes */
if(type == AR5K_PKT_TYPE_BEACON)
- buff_len = roundup(buff_len, 4);
+ pkt_len = roundup(pkt_len, 4);
- if (buff_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+ if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
return -EINVAL;
- tx_desc->tx_control_1 = buff_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+ tx_desc->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
/*
* Verify and set header length
{
struct ath5k_hw_4w_tx_desc *tx_desc;
struct ath5k_hw_tx_status *tx_status;
- unsigned int buff_len;
+ unsigned int frame_len;
ATH5K_TRACE(ah->ah_sc);
tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0;
/* Setup control descriptor */
/* Verify and set frame length */
- if (pkt_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+
+ /* remove padding we might have added before */
+ frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+ if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
return -EINVAL;
- tx_desc->tx_control_0 = pkt_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+ tx_desc->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
/* Verify and set buffer length */
- buff_len = pkt_len - FCS_LEN;
/* NB: beacon's BufLen must be a multiple of 4 bytes */
if(type == AR5K_PKT_TYPE_BEACON)
- buff_len = roundup(buff_len, 4);
+ pkt_len = roundup(pkt_len, 4);
- if (buff_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+ if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
return -EINVAL;
- tx_desc->tx_control_1 = buff_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+ tx_desc->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
tx_desc->tx_control_0 |=
AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
#include "lo.h"
#include "phy.h"
+
+/* The unique identifier of the firmware that's officially supported by
+ * this driver version. */
+#define B43_SUPPORTED_FIRMWARE_ID "FW13"
+
+
#ifdef CONFIG_B43_DEBUG
# define B43_DEBUG 1
#else
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
+
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
err = -EOPNOTSUPP;
goto error;
}
- b43dbg(dev->wl, "Loading firmware version %u.%u "
- "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
- fwrev, fwpatch,
- (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
- (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
+ b43info(dev->wl, "Loading firmware version %u.%u "
+ "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
+ fwrev, fwpatch,
+ (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
+ (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
.resume = b43_resume,
};
+static void b43_print_driverinfo(void)
+{
+ const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
+ *feat_leds = "", *feat_rfkill = "";
+
+#ifdef CONFIG_B43_PCI_AUTOSELECT
+ feat_pci = "P";
+#endif
+#ifdef CONFIG_B43_PCMCIA
+ feat_pcmcia = "M";
+#endif
+#ifdef CONFIG_B43_NPHY
+ feat_nphy = "N";
+#endif
+#ifdef CONFIG_B43_LEDS
+ feat_leds = "L";
+#endif
+#ifdef CONFIG_B43_RFKILL
+ feat_rfkill = "R";
+#endif
+ printk(KERN_INFO "Broadcom 43xx driver loaded "
+ "[ Features: %s%s%s%s%s, Firmware-ID: "
+ B43_SUPPORTED_FIRMWARE_ID " ]\n",
+ feat_pci, feat_pcmcia, feat_nphy,
+ feat_leds, feat_rfkill);
+}
+
static int __init b43_init(void)
{
int err;
err = ssb_driver_register(&b43_ssb_driver);
if (err)
goto err_pcmcia_exit;
+ b43_print_driverinfo();
return err;
#include "phy.h"
+/* The unique identifier of the firmware that's officially supported by this
+ * driver version. */
+#define B43legacy_SUPPORTED_FIRMWARE_ID "FW10"
+
#define B43legacy_IRQWAIT_MAX_RETRIES 20
#define B43legacy_RX_MAX_SSI 60 /* best guess at max ssi */
}
-u16 b43legacy_dmacontroller_base(int dma64bit, int controller_idx)
+static u16 b43legacy_dmacontroller_base(enum b43legacy_dmatype type,
+ int controller_idx)
{
static const u16 map64[] = {
B43legacy_MMIO_DMA64_BASE0,
B43legacy_MMIO_DMA32_BASE5,
};
- if (dma64bit) {
+ if (type == B43legacy_DMA_64BIT) {
B43legacy_WARN_ON(!(controller_idx >= 0 &&
controller_idx < ARRAY_SIZE(map64)));
return map64[controller_idx];
}
/* Reset the RX DMA channel */
-int b43legacy_dmacontroller_rx_reset(struct b43legacy_wldev *dev,
- u16 mmio_base, int dma64)
+static int b43legacy_dmacontroller_rx_reset(struct b43legacy_wldev *dev,
+ u16 mmio_base,
+ enum b43legacy_dmatype type)
{
int i;
u32 value;
might_sleep();
- offset = dma64 ? B43legacy_DMA64_RXCTL : B43legacy_DMA32_RXCTL;
+ offset = (type == B43legacy_DMA_64BIT) ?
+ B43legacy_DMA64_RXCTL : B43legacy_DMA32_RXCTL;
b43legacy_write32(dev, mmio_base + offset, 0);
for (i = 0; i < 10; i++) {
- offset = dma64 ? B43legacy_DMA64_RXSTATUS :
- B43legacy_DMA32_RXSTATUS;
+ offset = (type == B43legacy_DMA_64BIT) ?
+ B43legacy_DMA64_RXSTATUS : B43legacy_DMA32_RXSTATUS;
value = b43legacy_read32(dev, mmio_base + offset);
- if (dma64) {
+ if (type == B43legacy_DMA_64BIT) {
value &= B43legacy_DMA64_RXSTAT;
if (value == B43legacy_DMA64_RXSTAT_DISABLED) {
i = -1;
}
/* Reset the RX DMA channel */
-int b43legacy_dmacontroller_tx_reset(struct b43legacy_wldev *dev,
- u16 mmio_base, int dma64)
+static int b43legacy_dmacontroller_tx_reset(struct b43legacy_wldev *dev,
+ u16 mmio_base,
+ enum b43legacy_dmatype type)
{
int i;
u32 value;
might_sleep();
for (i = 0; i < 10; i++) {
- offset = dma64 ? B43legacy_DMA64_TXSTATUS :
- B43legacy_DMA32_TXSTATUS;
+ offset = (type == B43legacy_DMA_64BIT) ?
+ B43legacy_DMA64_TXSTATUS : B43legacy_DMA32_TXSTATUS;
value = b43legacy_read32(dev, mmio_base + offset);
- if (dma64) {
+ if (type == B43legacy_DMA_64BIT) {
value &= B43legacy_DMA64_TXSTAT;
if (value == B43legacy_DMA64_TXSTAT_DISABLED ||
value == B43legacy_DMA64_TXSTAT_IDLEWAIT ||
}
msleep(1);
}
- offset = dma64 ? B43legacy_DMA64_TXCTL : B43legacy_DMA32_TXCTL;
+ offset = (type == B43legacy_DMA_64BIT) ? B43legacy_DMA64_TXCTL :
+ B43legacy_DMA32_TXCTL;
b43legacy_write32(dev, mmio_base + offset, 0);
for (i = 0; i < 10; i++) {
- offset = dma64 ? B43legacy_DMA64_TXSTATUS :
- B43legacy_DMA32_TXSTATUS;
+ offset = (type == B43legacy_DMA_64BIT) ?
+ B43legacy_DMA64_TXSTATUS : B43legacy_DMA32_TXSTATUS;
value = b43legacy_read32(dev, mmio_base + offset);
- if (dma64) {
+ if (type == B43legacy_DMA_64BIT) {
value &= B43legacy_DMA64_TXSTAT;
if (value == B43legacy_DMA64_TXSTAT_DISABLED) {
i = -1;
return 0;
}
+/* Check if a DMA mapping address is invalid. */
+static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring,
+ dma_addr_t addr,
+ size_t buffersize)
+{
+ if (unlikely(dma_mapping_error(addr)))
+ return 1;
+
+ switch (ring->type) {
+ case B43legacy_DMA_30BIT:
+ if ((u64)addr + buffersize > (1ULL << 30))
+ return 1;
+ break;
+ case B43legacy_DMA_32BIT:
+ if ((u64)addr + buffersize > (1ULL << 32))
+ return 1;
+ break;
+ case B43legacy_DMA_64BIT:
+ /* Currently we can't have addresses beyond 64 bits in the kernel. */
+ break;
+ }
+
+ /* The address is OK. */
+ return 0;
+}
+
static int setup_rx_descbuffer(struct b43legacy_dmaring *ring,
struct b43legacy_dmadesc_generic *desc,
struct b43legacy_dmadesc_meta *meta,
return -ENOMEM;
dmaaddr = map_descbuffer(ring, skb->data,
ring->rx_buffersize, 0);
- if (dma_mapping_error(dmaaddr)) {
+ if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
/* ugh. try to realloc in zone_dma */
gfp_flags |= GFP_DMA;
ring->rx_buffersize, 0);
}
- if (dma_mapping_error(dmaaddr)) {
+ if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
dev_kfree_skb_any(skb);
return -EIO;
}
u32 trans = ssb_dma_translation(ring->dev->dev);
if (ring->tx) {
- if (ring->dma64) {
+ if (ring->type == B43legacy_DMA_64BIT) {
u64 ringbase = (u64)(ring->dmabase);
addrext = ((ringbase >> 32) & SSB_DMA_TRANSLATION_MASK)
err = alloc_initial_descbuffers(ring);
if (err)
goto out;
- if (ring->dma64) {
+ if (ring->type == B43legacy_DMA_64BIT) {
u64 ringbase = (u64)(ring->dmabase);
addrext = ((ringbase >> 32) & SSB_DMA_TRANSLATION_MASK)
{
if (ring->tx) {
b43legacy_dmacontroller_tx_reset(ring->dev, ring->mmio_base,
- ring->dma64);
- if (ring->dma64) {
+ ring->type);
+ if (ring->type == B43legacy_DMA_64BIT) {
b43legacy_dma_write(ring, B43legacy_DMA64_TXRINGLO, 0);
b43legacy_dma_write(ring, B43legacy_DMA64_TXRINGHI, 0);
} else
b43legacy_dma_write(ring, B43legacy_DMA32_TXRING, 0);
} else {
b43legacy_dmacontroller_rx_reset(ring->dev, ring->mmio_base,
- ring->dma64);
- if (ring->dma64) {
+ ring->type);
+ if (ring->type == B43legacy_DMA_64BIT) {
b43legacy_dma_write(ring, B43legacy_DMA64_RXRINGLO, 0);
b43legacy_dma_write(ring, B43legacy_DMA64_RXRINGHI, 0);
} else
/* Main initialization function. */
static
-struct b43legacy_dmaring *b43legacy_setup_dmaring(
- struct b43legacy_wldev *dev,
- int controller_index,
- int for_tx,
- int dma64)
+struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
+ int controller_index,
+ int for_tx,
+ enum b43legacy_dmatype type)
{
struct b43legacy_dmaring *ring;
int err;
ring = kzalloc(sizeof(*ring), GFP_KERNEL);
if (!ring)
goto out;
+ ring->type = type;
nr_slots = B43legacy_RXRING_SLOTS;
if (for_tx)
goto err_kfree_meta;
/* test for ability to dma to txhdr_cache */
- dma_test = dma_map_single(dev->dev->dev,
- ring->txhdr_cache,
- sizeof(struct b43legacy_txhdr_fw3),
- DMA_TO_DEVICE);
+ dma_test = dma_map_single(dev->dev->dev, ring->txhdr_cache,
+ sizeof(struct b43legacy_txhdr_fw3),
+ DMA_TO_DEVICE);
- if (dma_mapping_error(dma_test)) {
+ if (b43legacy_dma_mapping_error(ring, dma_test,
+ sizeof(struct b43legacy_txhdr_fw3))) {
/* ugh realloc */
kfree(ring->txhdr_cache);
ring->txhdr_cache = kcalloc(nr_slots,
sizeof(struct b43legacy_txhdr_fw3),
DMA_TO_DEVICE);
- if (dma_mapping_error(dma_test))
+ if (b43legacy_dma_mapping_error(ring, dma_test,
+ sizeof(struct b43legacy_txhdr_fw3)))
goto err_kfree_txhdr_cache;
}
ring->dev = dev;
ring->nr_slots = nr_slots;
- ring->mmio_base = b43legacy_dmacontroller_base(dma64,
- controller_index);
+ ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index);
ring->index = controller_index;
- ring->dma64 = !!dma64;
- if (dma64)
+ if (type == B43legacy_DMA_64BIT)
ring->ops = &dma64_ops;
else
ring->ops = &dma32_ops;
if (!ring)
return;
- b43legacydbg(ring->dev->wl, "DMA-%s 0x%04X (%s) max used slots:"
- " %d/%d\n", (ring->dma64) ? "64" : "32", ring->mmio_base,
- (ring->tx) ? "TX" : "RX",
- ring->max_used_slots, ring->nr_slots);
+ b43legacydbg(ring->dev->wl, "DMA-%u 0x%04X (%s) max used slots:"
+ " %d/%d\n", (unsigned int)(ring->type), ring->mmio_base,
+ (ring->tx) ? "TX" : "RX", ring->max_used_slots,
+ ring->nr_slots);
/* Device IRQs are disabled prior entering this function,
* so no need to take care of concurrency with rx handler stuff.
*/
struct b43legacy_dmaring *ring;
int err;
u64 dmamask;
- int dma64 = 0;
+ enum b43legacy_dmatype type;
dmamask = supported_dma_mask(dev);
- if (dmamask == DMA_64BIT_MASK)
- dma64 = 1;
+ switch (dmamask) {
+ default:
+ B43legacy_WARN_ON(1);
+ case DMA_30BIT_MASK:
+ type = B43legacy_DMA_30BIT;
+ break;
+ case DMA_32BIT_MASK:
+ type = B43legacy_DMA_32BIT;
+ break;
+ case DMA_64BIT_MASK:
+ type = B43legacy_DMA_64BIT;
+ break;
+ }
err = ssb_dma_set_mask(dev->dev, dmamask);
if (err) {
err = -ENOMEM;
/* setup TX DMA channels. */
- ring = b43legacy_setup_dmaring(dev, 0, 1, dma64);
+ ring = b43legacy_setup_dmaring(dev, 0, 1, type);
if (!ring)
goto out;
dma->tx_ring0 = ring;
- ring = b43legacy_setup_dmaring(dev, 1, 1, dma64);
+ ring = b43legacy_setup_dmaring(dev, 1, 1, type);
if (!ring)
goto err_destroy_tx0;
dma->tx_ring1 = ring;
- ring = b43legacy_setup_dmaring(dev, 2, 1, dma64);
+ ring = b43legacy_setup_dmaring(dev, 2, 1, type);
if (!ring)
goto err_destroy_tx1;
dma->tx_ring2 = ring;
- ring = b43legacy_setup_dmaring(dev, 3, 1, dma64);
+ ring = b43legacy_setup_dmaring(dev, 3, 1, type);
if (!ring)
goto err_destroy_tx2;
dma->tx_ring3 = ring;
- ring = b43legacy_setup_dmaring(dev, 4, 1, dma64);
+ ring = b43legacy_setup_dmaring(dev, 4, 1, type);
if (!ring)
goto err_destroy_tx3;
dma->tx_ring4 = ring;
- ring = b43legacy_setup_dmaring(dev, 5, 1, dma64);
+ ring = b43legacy_setup_dmaring(dev, 5, 1, type);
if (!ring)
goto err_destroy_tx4;
dma->tx_ring5 = ring;
/* setup RX DMA channels. */
- ring = b43legacy_setup_dmaring(dev, 0, 0, dma64);
+ ring = b43legacy_setup_dmaring(dev, 0, 0, type);
if (!ring)
goto err_destroy_tx5;
dma->rx_ring0 = ring;
if (dev->dev->id.revision < 5) {
- ring = b43legacy_setup_dmaring(dev, 3, 0, dma64);
+ ring = b43legacy_setup_dmaring(dev, 3, 0, type);
if (!ring)
goto err_destroy_rx0;
dma->rx_ring3 = ring;
}
- b43legacydbg(dev->wl, "%d-bit DMA initialized\n",
- (dmamask == DMA_64BIT_MASK) ? 64 :
- (dmamask == DMA_32BIT_MASK) ? 32 : 30);
+ b43legacydbg(dev->wl, "%u-bit DMA initialized\n", (unsigned int)type);
err = 0;
out:
return err;
}
meta_hdr->dmaaddr = map_descbuffer(ring, (unsigned char *)header,
- sizeof(struct b43legacy_txhdr_fw3), 1);
- if (dma_mapping_error(meta_hdr->dmaaddr))
+ sizeof(struct b43legacy_txhdr_fw3), 1);
+ if (b43legacy_dma_mapping_error(ring, meta_hdr->dmaaddr,
+ sizeof(struct b43legacy_txhdr_fw3))) {
+ ring->current_slot = old_top_slot;
+ ring->used_slots = old_used_slots;
return -EIO;
+ }
ops->fill_descriptor(ring, desc, meta_hdr->dmaaddr,
sizeof(struct b43legacy_txhdr_fw3), 1, 0, 0);
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
/* create a bounce buffer in zone_dma on mapping failure. */
- if (dma_mapping_error(meta->dmaaddr)) {
+ if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb) {
ring->current_slot = old_top_slot;
skb = bounce_skb;
meta->skb = skb;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
- if (dma_mapping_error(meta->dmaaddr)) {
+ if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
err = -EIO;
void (*set_current_rxslot)(struct b43legacy_dmaring *ring, int slot);
};
+enum b43legacy_dmatype {
+ B43legacy_DMA_30BIT = 30,
+ B43legacy_DMA_32BIT = 32,
+ B43legacy_DMA_64BIT = 64,
+};
+
struct b43legacy_dmaring {
/* Lowlevel DMA ops. */
const struct b43legacy_dma_ops *ops;
int index;
/* Boolean. Is this a TX ring? */
bool tx;
- /* Boolean. 64bit DMA if true, 32bit DMA otherwise. */
- bool dma64;
+ /* The type of DMA engine used. */
+ enum b43legacy_dmatype type;
/* Boolean. Is this ring stopped at ieee80211 level? */
bool stopped;
/* Lock, only used for TX. */
int b43legacy_dma_init(struct b43legacy_wldev *dev);
void b43legacy_dma_free(struct b43legacy_wldev *dev);
-int b43legacy_dmacontroller_rx_reset(struct b43legacy_wldev *dev,
- u16 dmacontroller_mmio_base,
- int dma64);
-int b43legacy_dmacontroller_tx_reset(struct b43legacy_wldev *dev,
- u16 dmacontroller_mmio_base,
- int dma64);
-
-u16 b43legacy_dmacontroller_base(int dma64bit, int dmacontroller_idx);
-
void b43legacy_dma_tx_suspend(struct b43legacy_wldev *dev);
void b43legacy_dma_tx_resume(struct b43legacy_wldev *dev);
{
}
static inline
-int b43legacy_dmacontroller_rx_reset(struct b43legacy_wldev *dev,
- u16 dmacontroller_mmio_base,
- int dma64)
-{
- return 0;
-}
-static inline
-int b43legacy_dmacontroller_tx_reset(struct b43legacy_wldev *dev,
- u16 dmacontroller_mmio_base,
- int dma64)
-{
- return 0;
-}
-static inline
void b43legacy_dma_get_tx_stats(struct b43legacy_wldev *dev,
struct ieee80211_tx_queue_stats *stats)
{
* Broadcom B43legacy wireless driver
*
* Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
- * Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+ * Copyright (c) 2005-2008 Stefano Brivio <stefano.brivio@polimi.it>
* Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
* Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
* Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(B43legacy_SUPPORTED_FIRMWARE_ID);
+
#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
err = -EOPNOTSUPP;
goto error;
}
- b43legacydbg(dev->wl, "Loading firmware version 0x%X, patch level %u "
- "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch,
- (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
- (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
+ b43legacyinfo(dev->wl, "Loading firmware version 0x%X, patch level %u "
+ "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch,
+ (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
+ (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F,
+ fwtime & 0x1F);
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
.resume = b43legacy_resume,
};
+static void b43legacy_print_driverinfo(void)
+{
+ const char *feat_pci = "", *feat_leds = "", *feat_rfkill = "",
+ *feat_pio = "", *feat_dma = "";
+
+#ifdef CONFIG_B43LEGACY_PCI_AUTOSELECT
+ feat_pci = "P";
+#endif
+#ifdef CONFIG_B43LEGACY_LEDS
+ feat_leds = "L";
+#endif
+#ifdef CONFIG_B43LEGACY_RFKILL
+ feat_rfkill = "R";
+#endif
+#ifdef CONFIG_B43LEGACY_PIO
+ feat_pio = "I";
+#endif
+#ifdef CONFIG_B43LEGACY_DMA
+ feat_dma = "D";
+#endif
+ printk(KERN_INFO "Broadcom 43xx driver loaded "
+ "[ Features: %s%s%s%s%s, Firmware-ID: "
+ B43legacy_SUPPORTED_FIRMWARE_ID " ]\n",
+ feat_pci, feat_leds, feat_rfkill, feat_pio, feat_dma);
+}
+
static int __init b43legacy_init(void)
{
int err;
if (err)
goto err_dfs_exit;
+ b43legacy_print_driverinfo();
+
return err;
err_dfs_exit:
/* Set us so that we have processed and used all buffers, but have
* not restocked the Rx queue with fresh buffers */
rxq->read = rxq->write = 0;
- rxq->processed = RX_QUEUE_SIZE - 1;
rxq->free_count = 0;
spin_unlock_irqrestore(&rxq->lock, flags);
}
* Driver allocates buffers of this size for Rx
*/
-static inline int ipw_queue_space(const struct clx2_queue *q)
+/**
+ * ipw_rx_queue_space - Return number of free slots available in queue.
+ */
+static int ipw_rx_queue_space(const struct ipw_rx_queue *q)
+{
+ int s = q->read - q->write;
+ if (s <= 0)
+ s += RX_QUEUE_SIZE;
+ /* keep some buffer to not confuse full and empty queue */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+
+static inline int ipw_tx_queue_space(const struct clx2_queue *q)
{
int s = q->last_used - q->first_empty;
if (s <= 0)
priv->tx_packets++;
}
done:
- if ((ipw_queue_space(q) > q->low_mark) &&
+ if ((ipw_tx_queue_space(q) > q->low_mark) &&
(qindex >= 0) &&
(priv->status & STATUS_ASSOCIATED) && netif_running(priv->net_dev))
netif_wake_queue(priv->net_dev);
struct clx2_queue *q = &txq->q;
struct tfd_frame *tfd;
- if (ipw_queue_space(q) < (sync ? 1 : 2)) {
+ if (ipw_tx_queue_space(q) < (sync ? 1 : 2)) {
IPW_ERROR("No space for Tx\n");
return -EBUSY;
}
spin_lock_irqsave(&rxq->lock, flags);
write = rxq->write;
- while ((rxq->write != rxq->processed) && (rxq->free_count)) {
+ while ((ipw_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
element = rxq->rx_free.next;
rxb = list_entry(element, struct ipw_rx_mem_buffer, list);
list_del(element);
/* Set us so that we have processed and used all buffers, but have
* not restocked the Rx queue with fresh buffers */
rxq->read = rxq->write = 0;
- rxq->processed = RX_QUEUE_SIZE - 1;
rxq->free_count = 0;
return rxq;
struct ieee80211_hdr_4addr *header;
u32 r, w, i;
u8 network_packet;
+ u8 fill_rx = 0;
DECLARE_MAC_BUF(mac);
DECLARE_MAC_BUF(mac2);
DECLARE_MAC_BUF(mac3);
r = ipw_read32(priv, IPW_RX_READ_INDEX);
w = ipw_read32(priv, IPW_RX_WRITE_INDEX);
- i = (priv->rxq->processed + 1) % RX_QUEUE_SIZE;
+ i = priv->rxq->read;
+
+ if (ipw_rx_queue_space (priv->rxq) > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
while (i != r) {
rxb = priv->rxq->queue[i];
list_add_tail(&rxb->list, &priv->rxq->rx_used);
i = (i + 1) % RX_QUEUE_SIZE;
+
+ /* If there are a lot of unsued frames, restock the Rx queue
+ * so the ucode won't assert */
+ if (fill_rx) {
+ priv->rxq->read = i;
+ ipw_rx_queue_replenish(priv);
+ }
}
/* Backtrack one entry */
- priv->rxq->processed = (i ? i : RX_QUEUE_SIZE) - 1;
-
+ priv->rxq->read = i;
ipw_rx_queue_restock(priv);
}
q->first_empty = ipw_queue_inc_wrap(q->first_empty, q->n_bd);
ipw_write32(priv, q->reg_w, q->first_empty);
- if (ipw_queue_space(q) < q->high_mark)
+ if (ipw_tx_queue_space(q) < q->high_mark)
netif_stop_queue(priv->net_dev);
return NETDEV_TX_OK;
struct clx2_tx_queue *txq = &priv->txq[0];
#endif /* CONFIG_IPW2200_QOS */
- if (ipw_queue_space(&txq->q) < txq->q.high_mark)
+ if (ipw_tx_queue_space(&txq->q) < txq->q.high_mark)
return 1;
return 0;
BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
!(cmd->meta.flags & CMD_SIZE_HUGE));
+
+ if (iwl3945_is_rfkill(priv)) {
+ IWL_DEBUG_INFO("Not sending command - RF KILL");
+ return -EIO;
+ }
+
if (iwl3945_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
IWL_ERROR("No space for Tx\n");
return -ENOSPC;
*/
int iwl3945_eeprom_init(struct iwl3945_priv *priv)
{
- __le16 *e = (__le16 *)&priv->eeprom;
+ u16 *e = (u16 *)&priv->eeprom;
u32 gp = iwl3945_read32(priv, CSR_EEPROM_GP);
u32 r;
int sz = sizeof(priv->eeprom);
IWL_ERROR("Time out reading EEPROM[%d]", addr);
return -ETIMEDOUT;
}
- e[addr / 2] = cpu_to_le16(r >> 16);
+ e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
}
return 0;
#endif
/* drop all data frame if we are not associated */
- if ((!iwl3945_is_associated(priv) || !priv->assoc_id) &&
+ if ((!iwl3945_is_associated(priv) ||
+ ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id)) &&
((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) {
IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
goto drop_unlock;
int reclaim;
unsigned long flags;
u8 fill_rx = 0;
- u32 count = 0;
+ u32 count = 8;
/* uCode's read index (stored in shared DRAM) indicates the last Rx
* buffer that the driver may process (last buffer filled by ucode). */
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
+ test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND;
goto exit;
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
+ test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND |
test_bit(STATUS_FW_ERROR, &priv->status) <<
BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
!(cmd->meta.flags & CMD_SIZE_HUGE));
+ if (iwl4965_is_rfkill(priv)) {
+ IWL_DEBUG_INFO("Not sending command - RF KILL");
+ return -EIO;
+ }
+
if (iwl4965_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
IWL_ERROR("No space for Tx\n");
return -ENOSPC;
*/
int iwl4965_eeprom_init(struct iwl4965_priv *priv)
{
- __le16 *e = (__le16 *)&priv->eeprom;
+ u16 *e = (u16 *)&priv->eeprom;
u32 gp = iwl4965_read32(priv, CSR_EEPROM_GP);
u32 r;
int sz = sizeof(priv->eeprom);
rc = -ETIMEDOUT;
goto done;
}
- e[addr / 2] = cpu_to_le16(r >> 16);
+ e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
}
rc = 0;
/* drop all data frame if we are not associated */
if (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
(!iwl4965_is_associated(priv) ||
- !priv->assoc_id ||
+ ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) ||
!priv->assoc_station_added)) {
IWL_DEBUG_DROP("Dropping - !iwl4965_is_associated\n");
goto drop_unlock;
int reclaim;
unsigned long flags;
u8 fill_rx = 0;
- u32 count = 0;
+ u32 count = 8;
/* uCode's read index (stored in shared DRAM) indicates the last Rx
* buffer that the driver may process (last buffer filled by ucode). */
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
+ test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND;
goto exit;
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
+ test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND |
test_bit(STATUS_FW_ERROR, &priv->status) <<
struct usbnet *usbdev = priv->usbdev;
struct iw_statistics iwstats;
__le32 rssi, tmp;
- int len, ret, bitrate, j;
+ int len, ret, j;
unsigned long flags;
int update_jiffies = STATS_UPDATE_JIFFIES;
void *buf;
if (ret == 0)
iwstats.discard.misc += le32_to_cpu(tmp);
- /* Workaround transfer stalls on poor quality links. */
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_GEN_LINK_SPEED, &tmp, &len);
- if (ret == 0) {
- bitrate = le32_to_cpu(tmp) * 100;
- if (bitrate > 11000000)
- goto end;
-
+ /* Workaround transfer stalls on poor quality links.
+ * TODO: find right way to fix these stalls (as stalls do not happen
+ * with ndiswrapper/windows driver). */
+ if (iwstats.qual.qual <= 25) {
/* Decrease stats worker interval to catch stalls.
* faster. Faster than 400-500ms causes packet loss,
* Slower doesn't catch stalls fast enough.
/* Hercules */
{ USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Melco */
+ { USB_DEVICE(0x0411, 0x005e), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
-
/* MSI */
{ USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
#define HASR_MMC_INTR 0x0002 /* Interrupt request from MMC */
#define HASR_MMC_BUSY 0x0004 /* MMC busy indication */
#define HASR_PSA_BUSY 0x0008 /* LAN parameter storage area busy */
-};
+} __attribute__ ((packed));
typedef struct ha_t ha_t;
struct ha_t
#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */
#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */
#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */
-};
+} __attribute__ ((packed));
#define MMW_SIZE 37
unsigned char mmr_unused4[1]; /* unused */
unsigned char mmr_fee_data_l; /* Read data from EEPROM (low) */
unsigned char mmr_fee_data_h; /* Read data from EEPROM (high) */
-};
+} __attribute__ ((packed));
#define MMR_SIZE 36
{
struct list_head *l, *n;
struct dasd_ccw_req *cqr;
+ struct dasd_block *block;
list_for_each_safe(l, n, final_queue) {
cqr = list_entry(l, struct dasd_ccw_req, devlist);
list_del_init(&cqr->devlist);
- if (cqr->block)
- spin_lock_bh(&cqr->block->queue_lock);
+ block = cqr->block;
+ if (block)
+ spin_lock_bh(&block->queue_lock);
switch (cqr->status) {
case DASD_CQR_SUCCESS:
cqr->status = DASD_CQR_DONE;
cqr, cqr->status);
BUG();
}
- if (cqr->block)
- spin_unlock_bh(&cqr->block->queue_lock);
if (cqr->callback != NULL)
(cqr->callback)(cqr, cqr->callback_data);
+ if (block)
+ spin_unlock_bh(&block->queue_lock);
}
}
-
-
/*
* Take a look at the first request on the ccw queue and check
* if it reached its expire time. If so, terminate the IO.
page_addr = (unsigned long)
page_address(bvec->bv_page) + bvec->bv_offset;
source_addr = dev_info->start + (index<<12) + bytes_done;
- if (unlikely(page_addr & 4095) != 0 || (bvec->bv_len & 4095) != 0)
+ if (unlikely((page_addr & 4095) != 0) || (bvec->bv_len & 4095) != 0)
// More paranoia.
goto fail;
if (bio_data_dir(bio) == READ) {
/* Lock to protect internal data consistency. */
static DEFINE_SPINLOCK(sclp_lock);
-/* Mask of events that we can receive from the sclp interface. */
+/* Mask of events that we can send to the sclp interface. */
static sccb_mask_t sclp_receive_mask;
-/* Mask of events that we can send to the sclp interface. */
+/* Mask of events that we can receive from the sclp interface. */
static sccb_mask_t sclp_send_mask;
/* List of registered event listeners and senders. */
}
sclp_running_state = sclp_running_state_idle;
}
- if (evbuf_pending && sclp_receive_mask != 0 &&
+ if (evbuf_pending &&
sclp_activation_state == sclp_activation_state_active)
__sclp_queue_read_req();
spin_unlock(&sclp_lock);
reg = NULL;
list_for_each(l, &sclp_reg_list) {
reg = list_entry(l, struct sclp_register, list);
- receive_mask = reg->receive_mask & sclp_receive_mask;
- send_mask = reg->send_mask & sclp_send_mask;
+ receive_mask = reg->send_mask & sclp_receive_mask;
+ send_mask = reg->receive_mask & sclp_send_mask;
if (reg->sclp_receive_mask != receive_mask ||
reg->sclp_send_mask != send_mask) {
reg->sclp_receive_mask = receive_mask;
u16 mask_length;
sccb_mask_t receive_mask;
sccb_mask_t send_mask;
- sccb_mask_t sclp_send_mask;
sccb_mask_t sclp_receive_mask;
+ sccb_mask_t sclp_send_mask;
} __attribute__((packed));
/* Prepare init mask request. Called while sclp_lock is locked. */
/* of some routines it wants to be called from the low level driver */
struct sclp_register {
struct list_head list;
- /* event masks this user is registered for */
+ /* User wants to receive: */
sccb_mask_t receive_mask;
+ /* User wants to send: */
sccb_mask_t send_mask;
- /* actually present events */
+ /* H/W can receive: */
sccb_mask_t sclp_receive_mask;
+ /* H/W can send: */
sccb_mask_t sclp_send_mask;
/* called if event type availability changes */
void (*state_change_fn)(struct sclp_register *);
return rc;
}
- if (!(sclp_conf_register.sclp_receive_mask & EVTYP_CONFMGMDATA_MASK)) {
+ if (!(sclp_conf_register.sclp_send_mask & EVTYP_CONFMGMDATA_MASK)) {
printk(KERN_WARNING TAG "no configuration management.\n");
sclp_unregister(&sclp_conf_register);
rc = -ENOSYS;
"to hardware console.\n");
goto out;
}
- if (!(sclp_cpi_event.sclp_send_mask & EVTYP_CTLPROGIDENT_MASK)) {
+ if (!(sclp_cpi_event.sclp_receive_mask & EVTYP_CTLPROGIDENT_MASK)) {
printk(KERN_WARNING "cpi: no control program "
"identification support\n");
rc = -EOPNOTSUPP;
return -EIO;
sccb = buffer->sccb;
- if (sclp_rw_event.sclp_send_mask & EVTYP_MSG_MASK)
+ if (sclp_rw_event.sclp_receive_mask & EVTYP_MSG_MASK)
/* Use normal write message */
sccb->msg_buf.header.type = EVTYP_MSG;
- else if (sclp_rw_event.sclp_send_mask & EVTYP_PMSGCMD_MASK)
+ else if (sclp_rw_event.sclp_receive_mask & EVTYP_PMSGCMD_MASK)
/* Use write priority message */
sccb->msg_buf.header.type = EVTYP_PMSGCMD;
else
static int
__sclp_vt220_emit(struct sclp_vt220_request *request)
{
- if (!(sclp_vt220_register.sclp_send_mask & EVTYP_VT220MSG_MASK)) {
+ if (!(sclp_vt220_register.sclp_receive_mask & EVTYP_VT220MSG_MASK)) {
request->sclp_req.status = SCLP_REQ_FAILED;
return -EIO;
}
#include "io_sch.h"
static struct timer_list recovery_timer;
-static spinlock_t recovery_lock;
+static DEFINE_SPINLOCK(recovery_lock);
static int recovery_phase;
static const unsigned long recovery_delay[] = { 3, 30, 300 };
return 0;
}
-static void recovery_func(unsigned long data)
+static void recovery_work_func(struct work_struct *unused)
{
int redo = 0;
CIO_MSG_EVENT(2, "recovery: end\n");
}
+static DECLARE_WORK(recovery_work, recovery_work_func);
+
+static void recovery_func(unsigned long data)
+{
+ /*
+ * We can't do our recovery in softirq context and it's not
+ * performance critical, so we schedule it.
+ */
+ schedule_work(&recovery_work);
+}
+
void ccw_device_schedule_recovery(void)
{
unsigned long flags;
#include <linux/module.h>
#include <linux/init.h>
-
+#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/proc_fs.h>
if (!no_used)
return 1;
- if (!q->siga_sync && !irq->is_qebsm)
- /* we'll check for more primed buffers in qeth_stop_polling */
- return 0;
if (irq->is_qebsm) {
count = 1;
start_buf = q->first_to_check;
}
}
- wait_event_interruptible_timeout(cdev->private->wait_q,
- ((irq_ptr->state ==
- QDIO_IRQ_STATE_STOPPED) ||
- (irq_ptr->state ==
- QDIO_IRQ_STATE_ERR)),
- QDIO_ACTIVATE_TIMEOUT);
-
+ msleep(QDIO_ACTIVATE_TIMEOUT);
switch (irq_ptr->state) {
case QDIO_IRQ_STATE_STOPPED:
case QDIO_IRQ_STATE_ERR:
of the queue to 0 */
#define QDIO_ESTABLISH_TIMEOUT (1*HZ)
-#define QDIO_ACTIVATE_TIMEOUT (5*HZ)
#define QDIO_CLEANUP_CLEAR_TIMEOUT (20*HZ)
#define QDIO_CLEANUP_HALT_TIMEOUT (10*HZ)
#define QDIO_FORCE_CHECK_TIMEOUT (10*HZ)
+#define QDIO_ACTIVATE_TIMEOUT (5) /* 5 ms */
enum qdio_irq_states {
QDIO_IRQ_STATE_INACTIVE,
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
struct ipr_ioadl_desc *last_ioadl = NULL;
- int len = qc->nbytes + qc->pad_len;
+ int len = qc->nbytes;
struct scatterlist *sg;
unsigned int si;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
- ipr_cmd->dma_use_sg = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
+ ipr_cmd->dma_use_sg = qc->n_elem;
ipr_build_ata_ioadl(ipr_cmd, qc);
regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
task->uldd_task = qc;
if (ata_is_atapi(qc->tf.protocol)) {
memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
- task->total_xfer_len = qc->nbytes + qc->pad_len;
- task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
+ task->total_xfer_len = qc->nbytes;
+ task->num_scatter = qc->n_elem;
} else {
for_each_sg(qc->sg, sg, qc->n_elem, si)
xfer += sg->length;
}
req->buffer = NULL;
- if (blk_pc_request(req))
- sdb->length = req->data_len;
- else
- sdb->length = req->nr_sectors << 9;
/*
* Next, walk the list, and fill in the addresses and sizes of
count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
BUG_ON(count > sdb->table.nents);
sdb->table.nents = count;
+ if (blk_pc_request(req))
+ sdb->length = req->data_len;
+ else
+ sdb->length = req->nr_sectors << 9;
return BLKPREP_OK;
}
par->mmaped = 1;
return 0;
}
-
-static struct {
- u32 yoffset;
- u8 r[2][256];
- u8 g[2][256];
- u8 b[2][256];
-} atyfb_save;
-
-static void atyfb_save_palette(struct atyfb_par *par, int enter)
-{
- int i, tmp;
-
- for (i = 0; i < 256; i++) {
- tmp = aty_ld_8(DAC_CNTL, par) & 0xfc;
- if (M64_HAS(EXTRA_BRIGHT))
- tmp |= 0x2;
- aty_st_8(DAC_CNTL, tmp, par);
- aty_st_8(DAC_MASK, 0xff, par);
-
- aty_st_8(DAC_R_INDEX, i, par);
- atyfb_save.r[enter][i] = aty_ld_8(DAC_DATA, par);
- atyfb_save.g[enter][i] = aty_ld_8(DAC_DATA, par);
- atyfb_save.b[enter][i] = aty_ld_8(DAC_DATA, par);
- aty_st_8(DAC_W_INDEX, i, par);
- aty_st_8(DAC_DATA, atyfb_save.r[1 - enter][i], par);
- aty_st_8(DAC_DATA, atyfb_save.g[1 - enter][i], par);
- aty_st_8(DAC_DATA, atyfb_save.b[1 - enter][i], par);
- }
-}
-
-static void atyfb_palette(int enter)
-{
- struct atyfb_par *par;
- struct fb_info *info;
- int i;
-
- for (i = 0; i < FB_MAX; i++) {
- info = registered_fb[i];
- if (info && info->fbops == &atyfb_ops) {
- par = (struct atyfb_par *) info->par;
-
- atyfb_save_palette(par, enter);
- if (enter) {
- atyfb_save.yoffset = info->var.yoffset;
- info->var.yoffset = 0;
- set_off_pitch(par, info);
- } else {
- info->var.yoffset = atyfb_save.yoffset;
- set_off_pitch(par, info);
- }
- aty_st_le32(CRTC_OFF_PITCH, par->crtc.off_pitch, par);
- break;
- }
- }
-}
#endif /* __sparc__ */
goto aty_init_exit;
}
-#ifdef __sparc__
- atyfb_save_palette(par, 0);
-#endif
-
#ifdef CONFIG_FB_ATY_CT
if (!noaccel && M64_HAS(INTEGRATED))
aty_init_cursor(info);
#ifdef __sparc__
-extern void (*prom_palette) (int);
-
static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
struct fb_info *info, unsigned long addr)
{
goto err_release_io;
#ifdef __sparc__
- if (!prom_palette)
- prom_palette = atyfb_palette;
-
/*
* Add /dev/fb mmap values.
*/
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/mm.h>
+#include <linux/uaccess.h>
#include <asm/oplib.h>
#include <asm/fbio.h>
To compile this driver as a module, choose M here: the
module will be called it8712f_wdt.
+config HP_WATCHDOG
+ tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+ depends on X86
+ help
+ A software monitoring watchdog and NMI sourcing driver. This driver
+ will detect lockups and provide stack trace. Also, when an NMI
+ occurs this driver will make the necessary BIOS calls to log
+ the cause of the NMI. This is a driver that will only load on a
+ HP ProLiant system with a minimum of iLO2 support.
+ To compile this driver as a module, choose M here: the
+ module will be called hpwdt.
+
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on X86
To compile this driver as a module, choose M here: the
module will be called rm9k_wdt.
+config SIBYTE_WDOG
+ tristate "Sibyte SoC hardware watchdog"
+ depends on CPU_SB1
+ help
+ Watchdog driver for the built in watchdog hardware in Sibyte
+ SoC processors. There are apparently two watchdog timers
+ on such processors; this driver supports only the first one,
+ because currently Linux only supports exporting one watchdog
+ to userspace.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called sb_wdog.
+
config AR7_WDT
tristate "TI AR7 Watchdog Timer"
depends on AR7
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
+obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
#define stampit() stamp("here i am")
+#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
#define WATCHDOG_NAME "bfin-wdt"
#define PFX WATCHDOG_NAME ": "
ret = register_reboot_notifier(&bfin_wdt_notifier);
if (ret) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
return ret;
}
ret = misc_register(&bfin_wdt_miscdev);
if (ret) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
unregister_reboot_notifier(&bfin_wdt_notifier);
return ret;
}
- printk(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
+ pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
timeout, nowayout);
return 0;
--- /dev/null
+/*
+ * HP WatchDog Driver
+ * based on
+ *
+ * SoftDog 0.05: A Software Watchdog Device
+ *
+ * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
+ * Thomas Mingarelli <thomas.mingarelli@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/moduleparam.h>
+#include <linux/notifier.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <asm/dmi.h>
+#include <asm/desc.h>
+#include <asm/kdebug.h>
+
+#define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
+#define CRU_BIOS_SIGNATURE_VALUE 0x55524324
+#define PCI_BIOS32_PARAGRAPH_LEN 16
+#define PCI_ROM_BASE1 0x000F0000
+#define ROM_SIZE 0x10000
+
+struct bios32_service_dir {
+ u32 signature;
+ u32 entry_point;
+ u8 revision;
+ u8 length;
+ u8 checksum;
+ u8 reserved[5];
+};
+
+/*
+ * smbios_entry_point - defines SMBIOS entry point structure
+ *
+ * anchor[4] - anchor string (_SM_)
+ * checksum - checksum of the entry point structure
+ * length - length of the entry point structure
+ * major_ver - major version (02h for revision 2.1)
+ * minor_ver - minor version (01h for revision 2.1)
+ * max_struct_size - size of the largest SMBIOS structure
+ * revision - entry point structure revision implemented
+ * formatted_area[5] - reserved
+ * intermediate_anchor[5] - intermediate anchor string (_DMI_)
+ * intermediate_checksum - intermediate checksum
+ * table_length - structure table length
+ * table_address - structure table address
+ * table_num_structs - number of SMBIOS structures present
+ * bcd_revision - BCD revision
+ */
+struct smbios_entry_point {
+ u8 anchor[4];
+ u8 checksum;
+ u8 length;
+ u8 major_ver;
+ u8 minor_ver;
+ u16 max_struct_size;
+ u8 revision;
+ u8 formatted_area[5];
+ u8 intermediate_anchor[5];
+ u8 intermediate_checksum;
+ u16 table_length;
+ u64 table_address;
+ u16 table_num_structs;
+ u8 bcd_revision;
+};
+
+/* type 212 */
+struct smbios_cru64_info {
+ u8 type;
+ u8 byte_length;
+ u16 handle;
+ u32 signature;
+ u64 physical_address;
+ u32 double_length;
+ u32 double_offset;
+};
+#define SMBIOS_CRU64_INFORMATION 212
+
+struct cmn_registers {
+ union {
+ struct {
+ u8 ral;
+ u8 rah;
+ u16 rea2;
+ };
+ u32 reax;
+ } u1;
+ union {
+ struct {
+ u8 rbl;
+ u8 rbh;
+ u8 reb2l;
+ u8 reb2h;
+ };
+ u32 rebx;
+ } u2;
+ union {
+ struct {
+ u8 rcl;
+ u8 rch;
+ u16 rec2;
+ };
+ u32 recx;
+ } u3;
+ union {
+ struct {
+ u8 rdl;
+ u8 rdh;
+ u16 red2;
+ };
+ u32 redx;
+ } u4;
+
+ u32 resi;
+ u32 redi;
+ u16 rds;
+ u16 res;
+ u32 reflags;
+} __attribute__((packed));
+
+#define DEFAULT_MARGIN 30
+static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */
+static unsigned int reload; /* the computed soft_margin */
+static int nowayout = WATCHDOG_NOWAYOUT;
+static char expect_release;
+static unsigned long hpwdt_is_open;
+
+static void __iomem *pci_mem_addr; /* the PCI-memory address */
+static unsigned long __iomem *hpwdt_timer_reg;
+static unsigned long __iomem *hpwdt_timer_con;
+
+static DEFINE_SPINLOCK(rom_lock);
+
+static void *cru_rom_addr;
+
+static struct cmn_registers cmn_regs;
+
+static struct pci_device_id hpwdt_devices[] = {
+ {
+ .vendor = PCI_VENDOR_ID_COMPAQ,
+ .device = 0xB203,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {0}, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+
+/*
+ * bios_checksum
+ */
+static int __devinit bios_checksum(const char __iomem *ptr, int len)
+{
+ char sum = 0;
+ int i;
+
+ /*
+ * calculate checksum of size bytes. This should add up
+ * to zero if we have a valid header.
+ */
+ for (i = 0; i < len; i++)
+ sum += ptr[i];
+
+ return ((sum == 0) && (len > 0));
+}
+
+#ifndef CONFIG_X86_64
+/* --32 Bit Bios------------------------------------------------------------ */
+
+#define HPWDT_ARCH 32
+
+asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
+ unsigned long *pRomEntry)
+{
+ asm("pushl %ebp \n\t"
+ "movl %esp, %ebp \n\t"
+ "pusha \n\t"
+ "pushf \n\t"
+ "push %es \n\t"
+ "push %ds \n\t"
+ "pop %es \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl 4(%eax),%ebx \n\t"
+ "movl 8(%eax),%ecx \n\t"
+ "movl 12(%eax),%edx \n\t"
+ "movl 16(%eax),%esi \n\t"
+ "movl 20(%eax),%edi \n\t"
+ "movl (%eax),%eax \n\t"
+ "push %cs \n\t"
+ "call *12(%ebp) \n\t"
+ "pushf \n\t"
+ "pushl %eax \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl %ebx,4(%eax) \n\t"
+ "movl %ecx,8(%eax) \n\t"
+ "movl %edx,12(%eax) \n\t"
+ "movl %esi,16(%eax) \n\t"
+ "movl %edi,20(%eax) \n\t"
+ "movw %ds,24(%eax) \n\t"
+ "movw %es,26(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,28(%eax) \n\t"
+ "pop %es \n\t"
+ "popf \n\t"
+ "popa \n\t"
+ "leave \n\t" "ret");
+}
+
+/*
+ * cru_detect
+ *
+ * Routine Description:
+ * This function uses the 32-bit BIOS Service Directory record to
+ * search for a $CRU record.
+ *
+ * Return Value:
+ * 0 : SUCCESS
+ * <0 : FAILURE
+ */
+static int __devinit cru_detect(unsigned long map_entry,
+ unsigned long map_offset)
+{
+ void *bios32_map;
+ unsigned long *bios32_entrypoint;
+ unsigned long cru_physical_address;
+ unsigned long cru_length;
+ unsigned long physical_bios_base = 0;
+ unsigned long physical_bios_offset = 0;
+ int retval = -ENODEV;
+
+ bios32_map = ioremap(map_entry, (2 * PAGE_SIZE));
+
+ if (bios32_map == NULL)
+ return -ENODEV;
+
+ bios32_entrypoint = bios32_map + map_offset;
+
+ cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
+
+ asminline_call(&cmn_regs, bios32_entrypoint);
+
+ if (cmn_regs.u1.ral != 0) {
+ printk(KERN_WARNING
+ "hpwdt: Call succeeded but with an error: 0x%x\n",
+ cmn_regs.u1.ral);
+ } else {
+ physical_bios_base = cmn_regs.u2.rebx;
+ physical_bios_offset = cmn_regs.u4.redx;
+ cru_length = cmn_regs.u3.recx;
+ cru_physical_address =
+ physical_bios_base + physical_bios_offset;
+
+ /* If the values look OK, then map it in. */
+ if ((physical_bios_base + physical_bios_offset)) {
+ cru_rom_addr =
+ ioremap(cru_physical_address, cru_length);
+ if (cru_rom_addr)
+ retval = 0;
+ }
+
+ printk(KERN_DEBUG "hpwdt: CRU Base Address: 0x%lx\n",
+ physical_bios_base);
+ printk(KERN_DEBUG "hpwdt: CRU Offset Address: 0x%lx\n",
+ physical_bios_offset);
+ printk(KERN_DEBUG "hpwdt: CRU Length: 0x%lx\n",
+ cru_length);
+ printk(KERN_DEBUG "hpwdt: CRU Mapped Address: 0x%x\n",
+ (unsigned int)&cru_rom_addr);
+ }
+ iounmap(bios32_map);
+ return retval;
+}
+
+/*
+ * bios32_present
+ *
+ * Routine Description:
+ * This function finds the 32-bit BIOS Service Directory
+ *
+ * Return Value:
+ * 0 : SUCCESS
+ * <0 : FAILURE
+ */
+static int __devinit bios32_present(const char __iomem *p)
+{
+ struct bios32_service_dir *bios_32_ptr;
+ int length;
+ unsigned long map_entry, map_offset;
+
+ bios_32_ptr = (struct bios32_service_dir *) p;
+
+ /*
+ * Search for signature by checking equal to the swizzled value
+ * instead of calling another routine to perform a strcmp.
+ */
+ if (bios_32_ptr->signature == PCI_BIOS32_SD_VALUE) {
+ length = bios_32_ptr->length * PCI_BIOS32_PARAGRAPH_LEN;
+ if (bios_checksum(p, length)) {
+ /*
+ * According to the spec, we're looking for the
+ * first 4KB-aligned address below the entrypoint
+ * listed in the header. The Service Directory code
+ * is guaranteed to occupy no more than 2 4KB pages.
+ */
+ map_entry = bios_32_ptr->entry_point & ~(PAGE_SIZE - 1);
+ map_offset = bios_32_ptr->entry_point - map_entry;
+
+ return cru_detect(map_entry, map_offset);
+ }
+ }
+ return -ENODEV;
+}
+
+static int __devinit detect_cru_service(void)
+{
+ char __iomem *p, *q;
+ int rc = -1;
+
+ /*
+ * Search from 0x0f0000 through 0x0fffff, inclusive.
+ */
+ p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
+ if (p == NULL)
+ return -ENOMEM;
+
+ for (q = p; q < p + ROM_SIZE; q += 16) {
+ rc = bios32_present(q);
+ if (!rc)
+ break;
+ }
+ iounmap(p);
+ return rc;
+}
+
+#else
+/* --64 Bit Bios------------------------------------------------------------ */
+
+#define HPWDT_ARCH 64
+
+asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
+ unsigned long *pRomEntry)
+{
+ asm("pushq %rbp \n\t"
+ "movq %rsp, %rbp \n\t"
+ "pushq %rax \n\t"
+ "pushq %rbx \n\t"
+ "pushq %rdx \n\t"
+ "pushq %r12 \n\t"
+ "pushq %r9 \n\t"
+ "movq %rsi, %r12 \n\t"
+ "movq %rdi, %r9 \n\t"
+ "movl 4(%r9),%ebx \n\t"
+ "movl 8(%r9),%ecx \n\t"
+ "movl 12(%r9),%edx \n\t"
+ "movl 16(%r9),%esi \n\t"
+ "movl 20(%r9),%edi \n\t"
+ "movl (%r9),%eax \n\t"
+ "call *%r12 \n\t"
+ "pushfq \n\t"
+ "popq %r12 \n\t"
+ "popfq \n\t"
+ "movl %eax, (%r9) \n\t"
+ "movl %ebx, 4(%r9) \n\t"
+ "movl %ecx, 8(%r9) \n\t"
+ "movl %edx, 12(%r9) \n\t"
+ "movl %esi, 16(%r9) \n\t"
+ "movl %edi, 20(%r9) \n\t"
+ "movq %r12, %rax \n\t"
+ "movl %eax, 28(%r9) \n\t"
+ "popq %r9 \n\t"
+ "popq %r12 \n\t"
+ "popq %rdx \n\t"
+ "popq %rbx \n\t"
+ "popq %rax \n\t"
+ "leave \n\t" "ret");
+}
+
+/*
+ * dmi_find_cru
+ *
+ * Routine Description:
+ * This function checks wether or not a SMBIOS/DMI record is
+ * the 64bit CRU info or not
+ *
+ * Return Value:
+ * 0 : SUCCESS - if record found
+ * <0 : FAILURE - if record not found
+ */
+static void __devinit dmi_find_cru(const struct dmi_header *dm)
+{
+ struct smbios_cru64_info *smbios_cru64_ptr;
+ unsigned long cru_physical_address;
+
+ if (dm->type == SMBIOS_CRU64_INFORMATION) {
+ smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
+ if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
+ cru_physical_address =
+ smbios_cru64_ptr->physical_address +
+ smbios_cru64_ptr->double_offset;
+ cru_rom_addr = ioremap(cru_physical_address,
+ smbios_cru64_ptr->double_length);
+ }
+ }
+}
+
+/*
+ * dmi_table
+ *
+ * Routine Description:
+ * Decode the SMBIOS/DMI table and check if we have a 64bit CRU record
+ * or not.
+ *
+ * We have to be cautious here. We have seen BIOSes with DMI pointers
+ * pointing to completely the wrong place for example
+ */
+static void __devinit dmi_table(u8 *buf, int len, int num,
+ void (*decode)(const struct dmi_header *))
+{
+ u8 *data = buf;
+ int i = 0;
+
+ /*
+ * Stop when we see all the items the table claimed to have
+ * OR we run off the end of the table (also happens)
+ */
+ while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
+ const struct dmi_header *dm = (const struct dmi_header *)data;
+
+ /*
+ * We want to know the total length (formated area and strings)
+ * before decoding to make sure we won't run off the table in
+ * dmi_decode or dmi_string
+ */
+ data += dm->length;
+ while ((data - buf < len - 1) && (data[0] || data[1]))
+ data++;
+ if (data - buf < len - 1)
+ decode(dm);
+ data += 2;
+ i++;
+ }
+}
+
+/*
+ * smbios_present
+ *
+ * Routine Description:
+ * This function parses the SMBIOS entry point table to retrieve
+ * the 64 bit CRU Service.
+ *
+ * Return Value:
+ * 0 : SUCCESS
+ * <0 : FAILURE
+ */
+static int __devinit smbios_present(const char __iomem *p)
+{
+ struct smbios_entry_point *eps =
+ (struct smbios_entry_point *) p;
+ int length;
+ u8 *buf;
+
+ /* check if we have indeed the SMBIOS table entry point */
+ if ((strncmp((char *)eps->anchor, "_SM_",
+ sizeof(eps->anchor))) == 0) {
+ length = eps->length;
+
+ /* SMBIOS v2.1 implementation might use 0x1e */
+ if ((length == 0x1e) &&
+ (eps->major_ver == 2) &&
+ (eps->minor_ver == 1))
+ length = 0x1f;
+
+ /*
+ * Now we will check:
+ * - SMBIOS checksum must be 0
+ * - intermediate anchor should be _DMI_
+ * - intermediate checksum should be 0
+ */
+ if ((bios_checksum(p, length)) &&
+ (strncmp((char *)eps->intermediate_anchor, "_DMI_",
+ sizeof(eps->intermediate_anchor)) == 0) &&
+ (bios_checksum(p+0x10, 15))) {
+ buf = ioremap(eps->table_address, eps->table_length);
+ if (buf == NULL)
+ return -ENODEV;
+
+
+ /* Scan the DMI table for the 64 bit CRU service */
+ dmi_table(buf, eps->table_length,
+ eps->table_num_structs, dmi_find_cru);
+
+ iounmap(buf);
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
+static int __devinit smbios_scan_machine(void)
+{
+ char __iomem *p, *q;
+ int rc;
+
+ if (efi_enabled) {
+ if (efi.smbios == EFI_INVALID_TABLE_ADDR)
+ return -ENODEV;
+
+ p = ioremap(efi.smbios, 32);
+ if (p == NULL)
+ return -ENOMEM;
+
+ rc = smbios_present(p);
+ iounmap(p);
+ } else {
+ /*
+ * Search from 0x0f0000 through 0x0fffff, inclusive.
+ */
+ p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
+ if (p == NULL)
+ return -ENOMEM;
+
+ for (q = p; q < p + ROM_SIZE; q += 16) {
+ rc = smbios_present(q);
+ if (!rc) {
+ break;
+ }
+ }
+ iounmap(p);
+ }
+}
+
+static int __devinit detect_cru_service(void)
+{
+ cru_rom_addr = NULL;
+
+ smbios_scan_machine(); /* will become dmi_walk(dmi_find_cru); */
+
+ /* if cru_rom_addr has been set then we found a CRU service */
+ return ((cru_rom_addr != NULL)? 0: -ENODEV);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#endif
+
+/*
+ * NMI Handler
+ */
+static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
+ void *data)
+{
+ static unsigned long rom_pl;
+ static int die_nmi_called;
+
+ if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+ return NOTIFY_OK;
+
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral == 0) {
+ printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ "but unable to determine source.\n");
+ } else {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
+ }
+
+ return NOTIFY_STOP;
+}
+
+/*
+ * Watchdog operations
+ */
+static void hpwdt_start(void)
+{
+ reload = (soft_margin * 1000) / 128;
+ iowrite16(reload, hpwdt_timer_reg);
+ iowrite16(0x85, hpwdt_timer_con);
+}
+
+static void hpwdt_stop(void)
+{
+ unsigned long data;
+
+ data = ioread16(hpwdt_timer_con);
+ data &= 0xFE;
+ iowrite16(data, hpwdt_timer_con);
+}
+
+static void hpwdt_ping(void)
+{
+ iowrite16(reload, hpwdt_timer_reg);
+}
+
+static int hpwdt_change_timer(int new_margin)
+{
+ /* Arbitrary, can't find the card's limits */
+ if (new_margin < 30 || new_margin > 600) {
+ printk(KERN_WARNING
+ "hpwdt: New value passed in is invalid: %d seconds.\n",
+ new_margin);
+ return -EINVAL;
+ }
+
+ soft_margin = new_margin;
+ printk(KERN_DEBUG
+ "hpwdt: New timer passed in is %d seconds.\n",
+ new_margin);
+ reload = (soft_margin * 1000) / 128;
+
+ return 0;
+}
+
+/*
+ * /dev/watchdog handling
+ */
+static int hpwdt_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &hpwdt_is_open))
+ return -EBUSY;
+
+ /* Start the watchdog */
+ hpwdt_start();
+ hpwdt_ping();
+
+ return nonseekable_open(inode, file);
+}
+
+static int hpwdt_release(struct inode *inode, struct file *file)
+{
+ /* Stop the watchdog */
+ if (expect_release == 42) {
+ hpwdt_stop();
+ } else {
+ printk(KERN_CRIT
+ "hpwdt: Unexpected close, not stopping watchdog!\n");
+ hpwdt_ping();
+ }
+
+ expect_release = 0;
+
+ /* /dev/watchdog is being closed, make sure it can be re-opened */
+ clear_bit(0, &hpwdt_is_open);
+
+ return 0;
+}
+
+static ssize_t hpwdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* note: just in case someone wrote the magic character
+ * five months ago... */
+ expect_release = 0;
+
+ /* scan to see whether or not we got the magic char. */
+ for (i = 0; i != len; i++) {
+ char c;
+ if (get_user(c, data+i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_release = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ hpwdt_ping();
+ }
+
+ return len;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .identity = "HP iLO2 HW Watchdog Timer",
+};
+
+static long hpwdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_margin;
+ int ret = -ENOTTY;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = 0;
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ ret = -EFAULT;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(0, p);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ hpwdt_ping();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(new_margin, p);
+ if (ret)
+ break;
+
+ ret = hpwdt_change_timer(new_margin);
+ if (ret)
+ break;
+
+ hpwdt_ping();
+ /* Fall */
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(soft_margin, p);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Kernel interfaces
+ */
+static struct file_operations hpwdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = hpwdt_write,
+ .unlocked_ioctl = hpwdt_ioctl,
+ .open = hpwdt_open,
+ .release = hpwdt_release,
+};
+
+static struct miscdevice hpwdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &hpwdt_fops,
+};
+
+static struct notifier_block die_notifier = {
+ .notifier_call = hpwdt_pretimeout,
+ .priority = 0x7FFFFFFF,
+};
+
+/*
+ * Init & Exit
+ */
+
+static int __devinit hpwdt_init_one(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ int retval;
+
+ /*
+ * First let's find out if we are on an iLO2 server. We will
+ * not run on a legacy ASM box.
+ */
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
+ dev_warn(&dev->dev,
+ "This server does not have an iLO2 ASIC.\n");
+ return -ENODEV;
+ }
+
+ if (pci_enable_device(dev)) {
+ dev_warn(&dev->dev,
+ "Not possible to enable PCI Device: 0x%x:0x%x.\n",
+ ent->vendor, ent->device);
+ return -ENODEV;
+ }
+
+ pci_mem_addr = pci_iomap(dev, 1, 0x80);
+ if (!pci_mem_addr) {
+ dev_warn(&dev->dev,
+ "Unable to detect the iLO2 server memory.\n");
+ retval = -ENOMEM;
+ goto error_pci_iomap;
+ }
+ hpwdt_timer_reg = pci_mem_addr + 0x70;
+ hpwdt_timer_con = pci_mem_addr + 0x72;
+
+ /* Make sure that we have a valid soft_margin */
+ if (hpwdt_change_timer(soft_margin))
+ hpwdt_change_timer(DEFAULT_MARGIN);
+
+ /*
+ * We need to map the ROM to get the CRU service.
+ * For 32 bit Operating Systems we need to go through the 32 Bit
+ * BIOS Service Directory
+ * For 64 bit Operating Systems we get that service through SMBIOS.
+ */
+ retval = detect_cru_service();
+ if (retval < 0) {
+ dev_warn(&dev->dev,
+ "Unable to detect the %d Bit CRU Service.\n",
+ HPWDT_ARCH);
+ goto error_get_cru;
+ }
+
+ /*
+ * We know this is the only CRU call we need to make so lets keep as
+ * few instructions as possible once the NMI comes in.
+ */
+ cmn_regs.u1.rah = 0x0D;
+ cmn_regs.u1.ral = 0x02;
+
+ retval = register_die_notifier(&die_notifier);
+ if (retval != 0) {
+ dev_warn(&dev->dev,
+ "Unable to register a die notifier (err=%d).\n",
+ retval);
+ goto error_die_notifier;
+ }
+
+ retval = misc_register(&hpwdt_miscdev);
+ if (retval < 0) {
+ dev_warn(&dev->dev,
+ "Unable to register miscdev on minor=%d (err=%d).\n",
+ WATCHDOG_MINOR, retval);
+ goto error_misc_register;
+ }
+
+ printk(KERN_INFO
+ "hp Watchdog Timer Driver: 1.00"
+ ", timer margin: %d seconds( nowayout=%d).\n",
+ soft_margin, nowayout);
+
+ return 0;
+
+error_misc_register:
+ unregister_die_notifier(&die_notifier);
+error_die_notifier:
+ if (cru_rom_addr)
+ iounmap(cru_rom_addr);
+error_get_cru:
+ pci_iounmap(dev, pci_mem_addr);
+error_pci_iomap:
+ pci_disable_device(dev);
+ return retval;
+}
+
+static void __devexit hpwdt_exit(struct pci_dev *dev)
+{
+ if (!nowayout)
+ hpwdt_stop();
+
+ misc_deregister(&hpwdt_miscdev);
+ unregister_die_notifier(&die_notifier);
+
+ if (cru_rom_addr)
+ iounmap(cru_rom_addr);
+ pci_iounmap(dev, pci_mem_addr);
+ pci_disable_device(dev);
+}
+
+static struct pci_driver hpwdt_driver = {
+ .name = "hpwdt",
+ .id_table = hpwdt_devices,
+ .probe = hpwdt_init_one,
+ .remove = __devexit_p(hpwdt_exit),
+};
+
+static void __exit hpwdt_cleanup(void)
+{
+ pci_unregister_driver(&hpwdt_driver);
+}
+
+static int __init hpwdt_init(void)
+{
+ return pci_register_driver(&hpwdt_driver);
+}
+
+MODULE_AUTHOR("Tom Mingarelli");
+MODULE_DESCRIPTION("hp watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+module_param(soft_margin, int, 0);
+MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+module_init(hpwdt_init);
+module_exit(hpwdt_cleanup);
#include <linux/completion.h>
#include <linux/jiffies.h>
#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/gpio.h>
#define MTX1_WDT_INTERVAL (5 * HZ)
volatile int queue;
int default_ticks;
unsigned long inuse;
+ unsigned gpio;
} mtx1_wdt_device;
static void mtx1_wdt_trigger(unsigned long unused)
* toggle GPIO2_15
*/
tmp = au_readl(GPIO2_DIR);
- tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15));
+ tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
+ ((~tmp) & (1 << mtx1_wdt_device.gpio));
au_writel (tmp, GPIO2_DIR);
if (mtx1_wdt_device.queue && ticks)
{
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
- au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR);
+ gpio_set_value(mtx1_wdt_device.gpio, 1);
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
}
mtx1_wdt_device.running++;
{
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
- au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR);
+ gpio_set_value(mtx1_wdt_device.gpio, 0);
}
ticks = mtx1_wdt_device.default_ticks;
};
-static int __init mtx1_wdt_init(void)
+static int mtx1_wdt_probe(struct platform_device *pdev)
{
int ret;
+ mtx1_wdt_device.gpio = pdev->resource[0].start;
+
if ((ret = misc_register(&mtx1_wdt_misc)) < 0) {
printk(KERN_ERR " mtx-1_wdt : failed to register\n");
return ret;
return 0;
}
-static void __exit mtx1_wdt_exit(void)
+static int mtx1_wdt_remove(struct platform_device *pdev)
{
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
wait_for_completion(&mtx1_wdt_device.stop);
}
misc_deregister(&mtx1_wdt_misc);
+ return 0;
+}
+
+static struct platform_driver mtx1_wdt = {
+ .probe = mtx1_wdt_probe,
+ .remove = mtx1_wdt_remove,
+ .driver.name = "mtx1-wdt",
+};
+
+static int __init mtx1_wdt_init(void)
+{
+ return platform_driver_register(&mtx1_wdt);
+}
+
+static void __exit mtx1_wdt_exit(void)
+{
+ platform_driver_unregister(&mtx1_wdt);
}
module_init(mtx1_wdt_init);
MODULE_AUTHOR("Michael Stickel, Florian Fainelli");
MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
--- /dev/null
+/*
+ * Watchdog driver for SiByte SB1 SoCs
+ *
+ * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@onstor.com>
+ *
+ * This driver is intended to make the second of two hardware watchdogs
+ * on the Sibyte 12XX and 11XX SoCs available to the user. There are two
+ * such devices available on the SoC, but it seems that there isn't an
+ * enumeration class for watchdogs in Linux like there is for RTCs.
+ * The second is used rather than the first because it uses IRQ 1,
+ * thereby avoiding all that IRQ 0 problematic nonsense.
+ *
+ * I have not tried this driver on a 1480 processor; it might work
+ * just well enough to really screw things up.
+ *
+ * It is a simple timer, and there is an interrupt that is raised the
+ * first time the timer expires. The second time it expires, the chip
+ * is reset and there is no way to redirect that NMI. Which could
+ * be problematic in some cases where this chip is sitting on the HT
+ * bus and has just taken responsibility for providing a cache block.
+ * Since the reset can't be redirected to the external reset pin, it is
+ * possible that other HT connected processors might hang and not reset.
+ * For Linux, a soft reset would probably be even worse than a hard reset.
+ * There you have it.
+ *
+ * The timer takes 23 bits of a 64 bit register (?) as a count value,
+ * and decrements the count every microsecond, for a max value of
+ * 0x7fffff usec or about 8.3ish seconds.
+ *
+ * This watchdog borrows some user semantics from the softdog driver,
+ * in that if you close the fd, it leaves the watchdog running, unless
+ * you previously wrote a 'V' to the fd, in which case it disables
+ * the watchdog when you close the fd like some other drivers.
+ *
+ * Based on various other watchdog drivers, which are probably all
+ * loosely based on something Alan Cox wrote years ago.
+ *
+ * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ * http://www.redhat.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 1 or 2 as published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/interrupt.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+
+/*
+ * set the initial count value of a timer
+ *
+ * wdog is the iomem address of the cfg register
+ */
+void sbwdog_set(char __iomem *wdog, unsigned long t)
+{
+ __raw_writeb(0, wdog - 0x10);
+ __raw_writeq(t & 0x7fffffUL, wdog);
+}
+
+/*
+ * cause the timer to [re]load it's initial count and start counting
+ * all over again
+ *
+ * wdog is the iomem address of the cfg register
+ */
+void sbwdog_pet(char __iomem *wdog)
+{
+ __raw_writeb(__raw_readb(wdog) | 1, wdog);
+}
+
+static unsigned long sbwdog_gate; /* keeps it to one thread only */
+static char __iomem *kern_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_0));
+static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1));
+static unsigned long timeout = 0x7fffffUL; /* useconds: 8.3ish secs. */
+static int expect_close;
+
+static struct watchdog_info ident = {
+ .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "SiByte Watchdog",
+};
+
+/*
+ * Allow only a single thread to walk the dog
+ */
+static int sbwdog_open(struct inode *inode, struct file *file)
+{
+ nonseekable_open(inode, file);
+ if (test_and_set_bit(0, &sbwdog_gate)) {
+ return -EBUSY;
+ }
+ __module_get(THIS_MODULE);
+
+ /*
+ * Activate the timer
+ */
+ sbwdog_set(user_dog, timeout);
+ __raw_writeb(1, user_dog);
+
+ return 0;
+}
+
+/*
+ * Put the dog back in the kennel.
+ */
+static int sbwdog_release(struct inode *inode, struct file *file)
+{
+ if (expect_close == 42) {
+ __raw_writeb(0, user_dog);
+ module_put(THIS_MODULE);
+ } else {
+ printk(KERN_CRIT "%s: Unexpected close, not stopping watchdog!\n",
+ ident.identity);
+ sbwdog_pet(user_dog);
+ }
+ clear_bit(0, &sbwdog_gate);
+ expect_close = 0;
+
+ return 0;
+}
+
+/*
+ * 42 - the answer
+ */
+static ssize_t sbwdog_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ int i;
+
+ if (len) {
+ /*
+ * restart the timer
+ */
+ expect_close = 0;
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i)) {
+ return -EFAULT;
+ }
+ if (c == 'V') {
+ expect_close = 42;
+ }
+ }
+ sbwdog_pet(user_dog);
+ }
+
+ return len;
+}
+
+static int sbwdog_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret = -ENOTTY;
+ unsigned long time;
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(0, p);
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(time, p);
+ if (ret) {
+ break;
+ }
+
+ time *= 1000000;
+ if (time > 0x7fffffUL) {
+ ret = -EINVAL;
+ break;
+ }
+ timeout = time;
+ sbwdog_set(user_dog, timeout);
+ sbwdog_pet(user_dog);
+
+ case WDIOC_GETTIMEOUT:
+ /*
+ * get the remaining count from the ... count register
+ * which is 1*8 before the config register
+ */
+ ret = put_user(__raw_readq(user_dog - 8) / 1000000, p);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ sbwdog_pet(user_dog);
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Notifier for system down
+ */
+static int
+sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf)
+{
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ /*
+ * sit and sit
+ */
+ __raw_writeb(0, user_dog);
+ __raw_writeb(0, kern_dog);
+ }
+
+ return NOTIFY_DONE;
+}
+
+static const struct file_operations sbwdog_fops =
+{
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = sbwdog_write,
+ .ioctl = sbwdog_ioctl,
+ .open = sbwdog_open,
+ .release = sbwdog_release,
+};
+
+static struct miscdevice sbwdog_miscdev =
+{
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &sbwdog_fops,
+};
+
+static struct notifier_block sbwdog_notifier = {
+ .notifier_call = sbwdog_notify_sys,
+};
+
+/*
+ * interrupt handler
+ *
+ * doesn't do a whole lot for user, but oh so cleverly written so kernel
+ * code can use it to re-up the watchdog, thereby saving the kernel from
+ * having to create and maintain a timer, just to tickle another timer,
+ * which is just so wrong.
+ */
+irqreturn_t sbwdog_interrupt(int irq, void *addr)
+{
+ unsigned long wd_init;
+ char *wd_cfg_reg = (char *)addr;
+ u8 cfg;
+
+ cfg = __raw_readb(wd_cfg_reg);
+ wd_init = __raw_readq(wd_cfg_reg - 8) & 0x7fffff;
+
+ /*
+ * if it's the second watchdog timer, it's for those users
+ */
+ if (wd_cfg_reg == user_dog) {
+ printk(KERN_CRIT
+ "%s in danger of initiating system reset in %ld.%01ld seconds\n",
+ ident.identity, wd_init / 1000000, (wd_init / 100000) % 10);
+ } else {
+ cfg |= 1;
+ }
+
+ __raw_writeb(cfg, wd_cfg_reg);
+
+ return IRQ_HANDLED;
+}
+
+static int __init sbwdog_init(void)
+{
+ int ret;
+
+ /*
+ * register a reboot notifier
+ */
+ ret = register_reboot_notifier(&sbwdog_notifier);
+ if (ret) {
+ printk (KERN_ERR "%s: cannot register reboot notifier (err=%d)\n",
+ ident.identity, ret);
+ return ret;
+ }
+
+ /*
+ * get the resources
+ */
+ ret = misc_register(&sbwdog_miscdev);
+ if (ret == 0) {
+ printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", ident.identity,
+ timeout / 1000000, (timeout / 100000) % 10);
+ }
+
+ ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ ident.identity, (void *)user_dog);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to request irq 1 - %d\n", ident.identity,
+ ret);
+ misc_deregister(&sbwdog_miscdev);
+ }
+
+ return ret;
+}
+
+static void __exit sbwdog_exit(void)
+{
+ misc_deregister(&sbwdog_miscdev);
+}
+
+module_init(sbwdog_init);
+module_exit(sbwdog_exit);
+
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>");
+MODULE_DESCRIPTION("SiByte Watchdog");
+
+module_param(timeout, ulong, 0);
+MODULE_PARM_DESC(timeout,
+ "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+/*
+ * example code that can be put in a platform code area to utilize the
+ * first watchdog timer for the kernels own purpose.
+
+ void
+platform_wd_setup(void)
+{
+ int ret;
+
+ ret = request_irq(0, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
+ if (ret) {
+ printk(KERN_CRIT "Watchdog IRQ zero(0) failed to be requested - %d\n",
+ ret);
+ }
+}
+
+
+ */
}
}
-void bio_release_pages(struct bio *bio)
+static void bio_release_pages(struct bio *bio)
{
struct bio_vec *bvec = bio->bi_io_vec;
int i;
struct inode vfs_inode;
};
+static const struct address_space_operations def_blk_aops;
+
static inline struct bdev_inode *BDEV_I(struct inode *inode)
{
return container_of(inode, struct bdev_inode, vfs_inode);
iov, offset, nr_segs, blkdev_get_blocks, NULL);
}
-#if 0
-static void blk_end_aio(struct bio *bio, int error)
-{
- struct kiocb *iocb = bio->bi_private;
- atomic_t *bio_count = &iocb->ki_bio_count;
-
- if (bio_data_dir(bio) == READ)
- bio_check_pages_dirty(bio);
- else {
- bio_release_pages(bio);
- bio_put(bio);
- }
-
- /* iocb->ki_nbytes stores error code from LLDD */
- if (error)
- iocb->ki_nbytes = -EIO;
-
- if (atomic_dec_and_test(bio_count)) {
- if ((long)iocb->ki_nbytes < 0)
- aio_complete(iocb, iocb->ki_nbytes, 0);
- else
- aio_complete(iocb, iocb->ki_left, 0);
- }
-
- return 0;
-}
-
-#define VEC_SIZE 16
-struct pvec {
- unsigned short nr;
- unsigned short idx;
- struct page *page[VEC_SIZE];
-};
-
-#define PAGES_SPANNED(addr, len) \
- (DIV_ROUND_UP((addr) + (len), PAGE_SIZE) - (addr) / PAGE_SIZE);
-
-/*
- * get page pointer for user addr, we internally cache struct page array for
- * (addr, count) range in pvec to avoid frequent call to get_user_pages. If
- * internal page list is exhausted, a batch count of up to VEC_SIZE is used
- * to get next set of page struct.
- */
-static struct page *blk_get_page(unsigned long addr, size_t count, int rw,
- struct pvec *pvec)
-{
- int ret, nr_pages;
- if (pvec->idx == pvec->nr) {
- nr_pages = PAGES_SPANNED(addr, count);
- nr_pages = min(nr_pages, VEC_SIZE);
- down_read(¤t->mm->mmap_sem);
- ret = get_user_pages(current, current->mm, addr, nr_pages,
- rw == READ, 0, pvec->page, NULL);
- up_read(¤t->mm->mmap_sem);
- if (ret < 0)
- return ERR_PTR(ret);
- pvec->nr = ret;
- pvec->idx = 0;
- }
- return pvec->page[pvec->idx++];
-}
-
-/* return a page back to pvec array */
-static void blk_unget_page(struct page *page, struct pvec *pvec)
-{
- pvec->page[--pvec->idx] = page;
-}
-
-static ssize_t
-blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
- loff_t pos, unsigned long nr_segs)
-{
- struct inode *inode = iocb->ki_filp->f_mapping->host;
- unsigned blkbits = blksize_bits(bdev_hardsect_size(I_BDEV(inode)));
- unsigned blocksize_mask = (1 << blkbits) - 1;
- unsigned long seg = 0; /* iov segment iterator */
- unsigned long nvec; /* number of bio vec needed */
- unsigned long cur_off; /* offset into current page */
- unsigned long cur_len; /* I/O len of current page, up to PAGE_SIZE */
-
- unsigned long addr; /* user iovec address */
- size_t count; /* user iovec len */
- size_t nbytes = iocb->ki_nbytes = iocb->ki_left; /* total xfer size */
- loff_t size; /* size of block device */
- struct bio *bio;
- atomic_t *bio_count = &iocb->ki_bio_count;
- struct page *page;
- struct pvec pvec;
-
- pvec.nr = 0;
- pvec.idx = 0;
-
- if (pos & blocksize_mask)
- return -EINVAL;
-
- size = i_size_read(inode);
- if (pos + nbytes > size) {
- nbytes = size - pos;
- iocb->ki_left = nbytes;
- }
-
- /*
- * check first non-zero iov alignment, the remaining
- * iov alignment is checked inside bio loop below.
- */
- do {
- addr = (unsigned long) iov[seg].iov_base;
- count = min(iov[seg].iov_len, nbytes);
- if (addr & blocksize_mask || count & blocksize_mask)
- return -EINVAL;
- } while (!count && ++seg < nr_segs);
- atomic_set(bio_count, 1);
-
- while (nbytes) {
- /* roughly estimate number of bio vec needed */
- nvec = (nbytes + PAGE_SIZE - 1) / PAGE_SIZE;
- nvec = max(nvec, nr_segs - seg);
- nvec = min(nvec, (unsigned long) BIO_MAX_PAGES);
-
- /* bio_alloc should not fail with GFP_KERNEL flag */
- bio = bio_alloc(GFP_KERNEL, nvec);
- bio->bi_bdev = I_BDEV(inode);
- bio->bi_end_io = blk_end_aio;
- bio->bi_private = iocb;
- bio->bi_sector = pos >> blkbits;
-same_bio:
- cur_off = addr & ~PAGE_MASK;
- cur_len = PAGE_SIZE - cur_off;
- if (count < cur_len)
- cur_len = count;
-
- page = blk_get_page(addr, count, rw, &pvec);
- if (unlikely(IS_ERR(page)))
- goto backout;
-
- if (bio_add_page(bio, page, cur_len, cur_off)) {
- pos += cur_len;
- addr += cur_len;
- count -= cur_len;
- nbytes -= cur_len;
-
- if (count)
- goto same_bio;
- while (++seg < nr_segs) {
- addr = (unsigned long) iov[seg].iov_base;
- count = iov[seg].iov_len;
- if (!count)
- continue;
- if (unlikely(addr & blocksize_mask ||
- count & blocksize_mask)) {
- page = ERR_PTR(-EINVAL);
- goto backout;
- }
- count = min(count, nbytes);
- goto same_bio;
- }
- } else {
- blk_unget_page(page, &pvec);
- }
-
- /* bio is ready, submit it */
- if (rw == READ)
- bio_set_pages_dirty(bio);
- atomic_inc(bio_count);
- submit_bio(rw, bio);
- }
-
-completion:
- iocb->ki_left -= nbytes;
- nbytes = iocb->ki_left;
- iocb->ki_pos += nbytes;
-
- blk_run_address_space(inode->i_mapping);
- if (atomic_dec_and_test(bio_count))
- aio_complete(iocb, nbytes, 0);
-
- return -EIOCBQUEUED;
-
-backout:
- /*
- * back out nbytes count constructed so far for this bio,
- * we will throw away current bio.
- */
- nbytes += bio->bi_size;
- bio_release_pages(bio);
- bio_put(bio);
-
- /*
- * if no bio was submmitted, return the error code.
- * otherwise, proceed with pending I/O completion.
- */
- if (atomic_read(bio_count) == 1)
- return PTR_ERR(page);
- goto completion;
-}
-#endif
-
static int blkdev_writepage(struct page *page, struct writeback_control *wbc)
{
return block_write_full_page(page, blkdev_get_block, wbc);
return blkdev_ioctl(file->f_mapping->host, file, cmd, arg);
}
-const struct address_space_operations def_blk_aops = {
+static const struct address_space_operations def_blk_aops = {
.readpage = blkdev_readpage,
.writepage = blkdev_writepage,
.sync_page = block_sync_page,
*(.kprobes.text) \
VMLINUX_SYMBOL(__kprobes_text_end) = .;
+/* Section used for early init (in .S files) */
+#define HEAD_TEXT *(.head.text)
+
/* init and exit section handling */
#define INIT_DATA \
*(.init.data) \
static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
{
- return dma_addr & (0xffUL << 56);
+ return dma_addr & ~(0xffUL << 56);
}
static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 by Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_QEMU_H
-#define __ASM_QEMU_H
-
-/*
- * Interrupt numbers
- */
-#define Q_PIC_IRQ_BASE 0
-#define Q_COUNT_COMPARE_IRQ 23
-
-/*
- * Qemu clock rate. Unlike on real MIPS this has no relation to the
- * instruction issue rate, so the choosen value is pure fiction, just needs
- * to match the value in Qemu itself.
- */
-#define QEMU_C0_COUNTER_CLOCK 100000000
-
-/*
- * Magic qemu system control location.
- */
-#define QEMU_RESTART_REG 0xBFBF0000
-#define QEMU_HALT_REG 0xBFBF0004
-
-#endif /* __ASM_QEMU_H */
extern void sni_cpu_time_init(void);
/* eisa init for RM200/400 */
+#ifdef CONFIG_EISA
extern int sni_eisa_root_init(void);
+#else
+static inline int sni_eisa_root_init(void)
+{
+ return 0;
+}
+#endif
/* common irq stuff */
extern void (*sni_hwint)(void);
#define __NR_timerfd (__NR_Linux + 318)
#define __NR_eventfd (__NR_Linux + 319)
#define __NR_fallocate (__NR_Linux + 320)
+#define __NR_timerfd_create (__NR_Linux + 321)
+#define __NR_timerfd_gettime (__NR_Linux + 322)
+#define __NR_timerfd_settime (__NR_Linux + 323)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 320
+#define __NR_Linux_syscalls 323
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 320
+#define __NR_O32_Linux_syscalls 323
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_timerfd (__NR_Linux + 277)
#define __NR_eventfd (__NR_Linux + 278)
#define __NR_fallocate (__NR_Linux + 279)
+#define __NR_timerfd_create (__NR_Linux + 280)
+#define __NR_timerfd_gettime (__NR_Linux + 281)
+#define __NR_timerfd_settime (__NR_Linux + 282)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 279
+#define __NR_Linux_syscalls 282
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 279
+#define __NR_64_Linux_syscalls 282
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_timerfd (__NR_Linux + 281)
#define __NR_eventfd (__NR_Linux + 282)
#define __NR_fallocate (__NR_Linux + 283)
+#define __NR_timerfd_create (__NR_Linux + 284)
+#define __NR_timerfd_gettime (__NR_Linux + 285)
+#define __NR_timerfd_settime (__NR_Linux + 286)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 283
+#define __NR_Linux_syscalls 286
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 283
+#define __NR_N32_Linux_syscalls 286
#ifdef __KERNEL__
asm volatile(
#ifndef __s390x__
- " ahi %1,31\n"
- " srl %1,5\n"
+ " ahi %1,-1\n"
+ " sra %1,5\n"
+ " jz 1f\n"
"0: c %2,0(%0,%3)\n"
" jne 1f\n"
" la %0,4(%0)\n"
" brct %1,0b\n"
"1:\n"
#else
- " aghi %1,63\n"
- " srlg %1,%1,6\n"
+ " aghi %1,-1\n"
+ " srag %1,%1,6\n"
+ " jz 1f\n"
"0: cg %2,0(%0,%3)\n"
" jne 1f\n"
" la %0,8(%0)\n"
asm volatile(
#ifndef __s390x__
- " ahi %1,31\n"
- " srl %1,5\n"
+ " ahi %1,-1\n"
+ " sra %1,5\n"
+ " jz 1f\n"
"0: c %2,0(%0,%3)\n"
" jne 1f\n"
" la %0,4(%0)\n"
" brct %1,0b\n"
"1:\n"
#else
- " aghi %1,63\n"
- " srlg %1,%1,6\n"
+ " aghi %1,-1\n"
+ " srag %1,%1,6\n"
+ " jz 1f\n"
"0: cg %2,0(%0,%3)\n"
" jne 1f\n"
" la %0,8(%0)\n"
} while (0)
#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
#define instruction_pointer(regs) ((regs)->tpc)
+#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
#ifdef CONFIG_SMP
extern unsigned long profile_pc(struct pt_regs *);
#else
#endif
#if (ICACHE_WAY_SIZE > PAGE_SIZE)
extern void __invalidate_icache_page_alias(unsigned long, unsigned long);
+#else
+# define __invalidate_icache_page_alias(v,p) do { } while(0)
#endif
/*
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 - 2005 Tensilica Inc.
+ * Copyright (C) 2003 - 2007 Tensilica Inc.
*/
+
#ifndef _XTENSA_COPROCESSOR_H
#define _XTENSA_COPROCESSOR_H
-#include <asm/variant/core.h>
+#include <linux/stringify.h>
#include <asm/variant/tie.h>
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+# include <asm/variant/tie-asm.h>
+
+.macro xchal_sa_start a b
+ .set .Lxchal_pofs_, 0
+ .set .Lxchal_ofs_, 0
+.endm
+
+.macro xchal_sa_align ptr minofs maxofs ofsalign totalign
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + .Lxchal_pofs_ + \totalign - 1
+ .set .Lxchal_ofs_, (.Lxchal_ofs_ & -\totalign) - .Lxchal_pofs_
+.endm
+
+#define _SELECT ( XTHAL_SAS_TIE | XTHAL_SAS_OPT \
+ | XTHAL_SAS_CC \
+ | XTHAL_SAS_CALR | XTHAL_SAS_CALE )
+
+.macro save_xtregs_opt ptr clb at1 at2 at3 at4 offset
+ .if XTREGS_OPT_SIZE > 0
+ addi \clb, \ptr, \offset
+ xchal_ncp_store \clb \at1 \at2 \at3 \at4 select=_SELECT
+ .endif
+.endm
+
+.macro load_xtregs_opt ptr clb at1 at2 at3 at4 offset
+ .if XTREGS_OPT_SIZE > 0
+ addi \clb, \ptr, \offset
+ xchal_ncp_load \clb \at1 \at2 \at3 \at4 select=_SELECT
+ .endif
+.endm
+#undef _SELECT
+
+#define _SELECT ( XTHAL_SAS_TIE | XTHAL_SAS_OPT \
+ | XTHAL_SAS_NOCC \
+ | XTHAL_SAS_CALR | XTHAL_SAS_CALE | XTHAL_SAS_GLOB )
+
+.macro save_xtregs_user ptr clb at1 at2 at3 at4 offset
+ .if XTREGS_USER_SIZE > 0
+ addi \clb, \ptr, \offset
+ xchal_ncp_store \clb \at1 \at2 \at3 \at4 select=_SELECT
+ .endif
+.endm
+
+.macro load_xtregs_user ptr clb at1 at2 at3 at4 offset
+ .if XTREGS_USER_SIZE > 0
+ addi \clb, \ptr, \offset
+ xchal_ncp_load \clb \at1 \at2 \at3 \at4 select=_SELECT
+ .endif
+.endm
+#undef _SELECT
+
+
+
+#endif /* __ASSEMBLY__ */
-#if !XCHAL_HAVE_CP
-
-#define XTENSA_CP_EXTRA_OFFSET 0
-#define XTENSA_CP_EXTRA_ALIGN 1 /* must be a power of 2 */
-#define XTENSA_CP_EXTRA_SIZE 0
-
-#else
-
-#define XTOFS(last_start,last_size,align) \
- ((last_start+last_size+align-1) & -align)
-
-#define XTENSA_CP_EXTRA_OFFSET 0
-#define XTENSA_CP_EXTRA_ALIGN XCHAL_EXTRA_SA_ALIGN
-
-#define XTENSA_CPE_CP0_OFFSET \
- XTOFS(XTENSA_CP_EXTRA_OFFSET, XCHAL_EXTRA_SA_SIZE, XCHAL_CP0_SA_ALIGN)
-#define XTENSA_CPE_CP1_OFFSET \
- XTOFS(XTENSA_CPE_CP0_OFFSET, XCHAL_CP0_SA_SIZE, XCHAL_CP1_SA_ALIGN)
-#define XTENSA_CPE_CP2_OFFSET \
- XTOFS(XTENSA_CPE_CP1_OFFSET, XCHAL_CP1_SA_SIZE, XCHAL_CP2_SA_ALIGN)
-#define XTENSA_CPE_CP3_OFFSET \
- XTOFS(XTENSA_CPE_CP2_OFFSET, XCHAL_CP2_SA_SIZE, XCHAL_CP3_SA_ALIGN)
-#define XTENSA_CPE_CP4_OFFSET \
- XTOFS(XTENSA_CPE_CP3_OFFSET, XCHAL_CP3_SA_SIZE, XCHAL_CP4_SA_ALIGN)
-#define XTENSA_CPE_CP5_OFFSET \
- XTOFS(XTENSA_CPE_CP4_OFFSET, XCHAL_CP4_SA_SIZE, XCHAL_CP5_SA_ALIGN)
-#define XTENSA_CPE_CP6_OFFSET \
- XTOFS(XTENSA_CPE_CP5_OFFSET, XCHAL_CP5_SA_SIZE, XCHAL_CP6_SA_ALIGN)
-#define XTENSA_CPE_CP7_OFFSET \
- XTOFS(XTENSA_CPE_CP6_OFFSET, XCHAL_CP6_SA_SIZE, XCHAL_CP7_SA_ALIGN)
-#define XTENSA_CP_EXTRA_SIZE \
- XTOFS(XTENSA_CPE_CP7_OFFSET, XCHAL_CP7_SA_SIZE, 16)
-
-#if XCHAL_CP_NUM > 0
-# ifndef __ASSEMBLY__
/*
- * Tasks that own contents of (last user) each coprocessor.
- * Entries are 0 for not-owned or non-existent coprocessors.
- * Note: The size of this structure is fixed to 8 bytes in entry.S
+ * XTENSA_HAVE_COPROCESSOR(x) returns 1 if coprocessor x is configured.
+ *
+ * XTENSA_HAVE_IO_PORT(x) returns 1 if io-port x is configured.
+ *
*/
-typedef struct {
- struct task_struct *owner; /* owner */
- int offset; /* offset in cpextra space. */
-} coprocessor_info_t;
-# else
-# define COPROCESSOR_INFO_OWNER 0
-# define COPROCESSOR_INFO_OFFSET 4
-# define COPROCESSOR_INFO_SIZE 8
-# endif
-#endif
-#endif /* XCHAL_HAVE_CP */
+#define XTENSA_HAVE_COPROCESSOR(x) \
+ ((XCHAL_CP_MASK ^ XCHAL_CP_PORT_MASK) & (1 << (x)))
+#define XTENSA_HAVE_COPROCESSORS \
+ (XCHAL_CP_MASK ^ XCHAL_CP_PORT_MASK)
+#define XTENSA_HAVE_IO_PORT(x) \
+ (XCHAL_CP_PORT_MASK & (1 << (x)))
+#define XTENSA_HAVE_IO_PORTS \
+ XCHAL_CP_PORT_MASK
#ifndef __ASSEMBLY__
-# if XCHAL_CP_NUM > 0
-struct task_struct;
-extern void release_coprocessors (struct task_struct*);
-extern void save_coprocessor_registers(void*, int);
-# else
-# define release_coprocessors(task)
-# endif
-typedef unsigned char cp_state_t[XTENSA_CP_EXTRA_SIZE]
- __attribute__ ((aligned (XTENSA_CP_EXTRA_ALIGN)));
-#endif /* !__ASSEMBLY__ */
+#if XCHAL_HAVE_CP
+
+#define RSR_CPENABLE(x) do { \
+ __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \
+ } while(0);
+#define WSR_CPENABLE(x) do { \
+ __asm__ __volatile__("wsr %0," __stringify(CPENABLE) "; rsync" \
+ :: "a" (x)); \
+ } while(0);
+#endif /* XCHAL_HAVE_CP */
+
+/*
+ * Additional registers.
+ * We define three types of additional registers:
+ * ext: extra registers that are used by the compiler
+ * cpn: optional registers that can be used by a user application
+ * cpX: coprocessor registers that can only be used if the corresponding
+ * CPENABLE bit is set.
+ */
+
+#define XCHAL_SA_REG(list,cc,abi,type,y,name,z,align,size,...) \
+ __REG ## list (cc, abi, type, name, size, align)
+
+#define __REG0(cc,abi,t,name,s,a) __REG0_ ## cc (abi,name)
+#define __REG1(cc,abi,t,name,s,a) __REG1_ ## cc (name)
+#define __REG2(cc,abi,type,...) __REG2_ ## type (__VA_ARGS__)
+
+#define __REG0_0(abi,name)
+#define __REG0_1(abi,name) __REG0_1 ## abi (name)
+#define __REG0_10(name) __u32 name;
+#define __REG0_11(name) __u32 name;
+#define __REG0_12(name)
+
+#define __REG1_0(name) __u32 name;
+#define __REG1_1(name)
+
+#define __REG2_0(n,s,a) __u32 name;
+#define __REG2_1(n,s,a) unsigned char n[s] __attribute__ ((aligned(a)));
+#define __REG2_2(n,s,a) unsigned char n[s] __attribute__ ((aligned(a)));
+
+typedef struct { XCHAL_NCP_SA_LIST(0) } xtregs_opt_t
+ __attribute__ ((aligned (XCHAL_NCP_SA_ALIGN)));
+typedef struct { XCHAL_NCP_SA_LIST(1) } xtregs_user_t
+ __attribute__ ((aligned (XCHAL_NCP_SA_ALIGN)));
+
+#if XTENSA_HAVE_COPROCESSORS
+
+typedef struct { XCHAL_CP0_SA_LIST(2) } xtregs_cp0_t
+ __attribute__ ((aligned (XCHAL_CP0_SA_ALIGN)));
+typedef struct { XCHAL_CP1_SA_LIST(2) } xtregs_cp1_t
+ __attribute__ ((aligned (XCHAL_CP1_SA_ALIGN)));
+typedef struct { XCHAL_CP2_SA_LIST(2) } xtregs_cp2_t
+ __attribute__ ((aligned (XCHAL_CP2_SA_ALIGN)));
+typedef struct { XCHAL_CP3_SA_LIST(2) } xtregs_cp3_t
+ __attribute__ ((aligned (XCHAL_CP3_SA_ALIGN)));
+typedef struct { XCHAL_CP4_SA_LIST(2) } xtregs_cp4_t
+ __attribute__ ((aligned (XCHAL_CP4_SA_ALIGN)));
+typedef struct { XCHAL_CP5_SA_LIST(2) } xtregs_cp5_t
+ __attribute__ ((aligned (XCHAL_CP5_SA_ALIGN)));
+typedef struct { XCHAL_CP6_SA_LIST(2) } xtregs_cp6_t
+ __attribute__ ((aligned (XCHAL_CP6_SA_ALIGN)));
+typedef struct { XCHAL_CP7_SA_LIST(2) } xtregs_cp7_t
+ __attribute__ ((aligned (XCHAL_CP7_SA_ALIGN)));
+
+extern struct thread_info* coprocessor_owner[XCHAL_CP_MAX];
+extern void coprocessor_save(void*, int);
+extern void coprocessor_load(void*, int);
+extern void coprocessor_flush(struct thread_info*, int);
+extern void coprocessor_restore(struct thread_info*, int);
+
+extern void coprocessor_release_all(struct thread_info*);
+extern void coprocessor_flush_all(struct thread_info*);
+
+static inline void coprocessor_clear_cpenable(void)
+{
+ unsigned long i = 0;
+ WSR_CPENABLE(i);
+}
+
+#endif /* XTENSA_HAVE_COPROCESSORS */
+
+#endif /* !__ASSEMBLY__ */
#endif /* _XTENSA_COPROCESSOR_H */
/* ELF register definitions. This is needed for core dump support. */
-/*
- * elf_gregset_t contains the application-level state in the following order:
- * Processor info: config_version, cpuxy
- * Processor state: pc, ps, exccause, excvaddr, wb, ws,
- * lbeg, lend, lcount, sar
- * GP regs: ar0 - arXX
- */
-
typedef unsigned long elf_greg_t;
typedef struct {
- elf_greg_t xchal_config_id0;
- elf_greg_t xchal_config_id1;
- elf_greg_t cpux;
- elf_greg_t cpuy;
elf_greg_t pc;
elf_greg_t ps;
- elf_greg_t exccause;
- elf_greg_t excvaddr;
- elf_greg_t windowbase;
- elf_greg_t windowstart;
elf_greg_t lbeg;
elf_greg_t lend;
elf_greg_t lcount;
elf_greg_t sar;
- elf_greg_t syscall;
- elf_greg_t ar[64];
+ elf_greg_t windowstart;
+ elf_greg_t windowbase;
+ elf_greg_t reserved[8+48];
+ elf_greg_t a[64];
} xtensa_gregset_t;
#define ELF_NGREG (sizeof(xtensa_gregset_t) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-/*
- * Compute the size of the coprocessor and extra state layout (register info)
- * table (in bytes).
- * This is actually the maximum size of the table, as opposed to the size,
- * which is available from the _xtensa_reginfo_table_size global variable.
- *
- * (See also arch/xtensa/kernel/coprocessor.S)
- *
- */
-
-#ifndef XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM
-# define XTENSA_CPE_LTABLE_SIZE 0
-#else
-# define XTENSA_CPE_SEGMENT(num) (num ? (1+num) : 0)
-# define XTENSA_CPE_LTABLE_ENTRIES \
- ( XTENSA_CPE_SEGMENT(XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP0_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP1_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP2_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP3_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP4_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP5_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP6_SA_CONTENTS_LIBDB_NUM) \
- + XTENSA_CPE_SEGMENT(XCHAL_CP7_SA_CONTENTS_LIBDB_NUM) \
- + 1 /* final entry */ \
- )
-# define XTENSA_CPE_LTABLE_SIZE (XTENSA_CPE_LTABLE_ENTRIES * 8)
-#endif
-
-
-/*
- * Instantiations of the elf_fpregset_t type contain, in most
- * architectures, the floating point (FPU) register set.
- * For Xtensa, this type is extended to contain all custom state,
- * ie. coprocessor and "extra" (non-coprocessor) state (including,
- * for example, TIE-defined states and register files; as well
- * as other optional processor state).
- * This includes FPU state if a floating-point coprocessor happens
- * to have been configured within the Xtensa processor.
- *
- * TOTAL_FPREGS_SIZE is the required size (without rounding)
- * of elf_fpregset_t. It provides space for the following:
- *
- * a) 32-bit mask of active coprocessors for this task (similar
- * to CPENABLE in single-threaded Xtensa processor systems)
- *
- * b) table describing the layout of custom states (ie. of
- * individual registers, etc) within the save areas
- *
- * c) save areas for each coprocessor and for non-coprocessor
- * ("extra") state
- *
- * Note that save areas may require up to 16-byte alignment when
- * accessed by save/restore sequences. We do not need to ensure
- * such alignment in an elf_fpregset_t structure because custom
- * state is not directly loaded/stored into it; rather, save area
- * contents are copied to elf_fpregset_t from the active save areas
- * (see 'struct task_struct' definition in processor.h for that)
- * using memcpy(). But we do allow space for such alignment,
- * to allow optimizations of layout and copying.
- */
-#if 0
-#define TOTAL_FPREGS_SIZE \
- (4 + XTENSA_CPE_LTABLE_SIZE + XTENSA_CP_EXTRA_SIZE)
-#define ELF_NFPREG \
- ((TOTAL_FPREGS_SIZE + sizeof(elf_fpreg_t) - 1) / sizeof(elf_fpreg_t))
-#else
-#define TOTAL_FPREGS_SIZE 0
-#define ELF_NFPREG 0
-#endif
+#define ELF_NFPREG 18
typedef unsigned int elf_fpreg_t;
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
#define ELF_CORE_COPY_REGS(_eregs, _pregs) \
- xtensa_elf_core_copy_regs (&_eregs, _pregs);
+ xtensa_elf_core_copy_regs ((xtensa_gregset_t*)&(_eregs), _pregs);
extern void xtensa_elf_core_copy_regs (xtensa_gregset_t *, struct pt_regs *);
_r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \
} while (0)
+typedef struct {
+ xtregs_opt_t opt;
+ xtregs_user_t user;
+#if XTENSA_HAVE_COPROCESSORS
+ xtregs_cp0_t cp0;
+ xtregs_cp1_t cp1;
+ xtregs_cp2_t cp2;
+ xtregs_cp3_t cp3;
+ xtregs_cp4_t cp4;
+ xtregs_cp5_t cp5;
+ xtregs_cp6_t cp6;
+ xtregs_cp7_t cp7;
+#endif
+} elf_xtregs_t;
+
#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
struct task_struct;
struct mod_arch_specific
{
- /* Module support is not completely implemented. */
+ /* No special elements, yet. */
};
+#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
+
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
return kmem_cache_alloc(pgtable_cache, GFP_KERNEL|__GFP_REPEAT);
}
-static inline pte_token_t pte_alloc_one(struct mm_struct *mm,
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
unsigned long addr)
{
struct page *page;
*/
#define VMALLOC_START 0xC0000000
-#define VMALLOC_END 0xC6FEFFFF
-#define TLBTEMP_BASE_1 0xC6FF0000
-#define TLBTEMP_BASE_2 0xC6FF8000
-#define MODULE_START 0xC7000000
-#define MODULE_END 0xC7FFFFFF
+#define VMALLOC_END 0xC7FEFFFF
+#define TLBTEMP_BASE_1 0xC7FF0000
+#define TLBTEMP_BASE_2 0xC7FF8000
/*
* Xtensa Linux config PTE layout (when present):
unsigned long dbreaka[XCHAL_NUM_DBREAK];
unsigned long dbreakc[XCHAL_NUM_DBREAK];
- /* Allocate storage for extra state and coprocessor state. */
- unsigned char cp_save[XTENSA_CP_EXTRA_SIZE]
- __attribute__ ((aligned(XTENSA_CP_EXTRA_ALIGN)));
-
/* Make structure 16 bytes aligned. */
int align[0] __attribute__ ((aligned(16)));
};
struct task_struct;
struct mm_struct;
-// FIXME: do we need release_thread for CP??
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
-// FIXME: do we need prepare_to_copy (lazy status) for CP??
/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
+extern void prepare_to_copy(struct task_struct*);
-/*
- * create a kernel thread without removing it from tasklists
- */
+/* Create a kernel thread without removing it from tasklists */
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/* Copy and release all segment info associated with a VM */
-
#define copy_segments(p, mm) do { } while(0)
#define release_segments(mm) do { } while(0)
#define forget_segments() do { } while (0)
/* Registers used by strace */
-#define REG_A_BASE 0xfc000000
-#define REG_AR_BASE 0x04000000
-#define REG_PC 0x14000000
-#define REG_PS 0x080000e6
-#define REG_WB 0x08000048
-#define REG_WS 0x08000049
-#define REG_LBEG 0x08000000
-#define REG_LEND 0x08000001
-#define REG_LCOUNT 0x08000002
-#define REG_SAR 0x08000003
-#define REG_DEPC 0x080000c0
-#define REG_EXCCAUSE 0x080000e8
-#define REG_EXCVADDR 0x080000ee
-#define SYSCALL_NR 0x1
-
-#define AR_REGNO_TO_A_REGNO(ar, wb) (ar - wb*4) & ~(XCHAL_NUM_AREGS - 1)
+#define REG_A_BASE 0x0000
+#define REG_AR_BASE 0x0100
+#define REG_PC 0x0020
+#define REG_PS 0x02e6
+#define REG_WB 0x0248
+#define REG_WS 0x0249
+#define REG_LBEG 0x0200
+#define REG_LEND 0x0201
+#define REG_LCOUNT 0x0202
+#define REG_SAR 0x0203
+
+#define SYSCALL_NR 0x00ff
/* Other PTRACE_ values defined in <linux/ptrace.h> using values 0-9,16,17,24 */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-#define PTRACE_GETFPREGSIZE 18
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETXTREGS 18
+#define PTRACE_SETXTREGS 19
#ifndef __ASSEMBLY__
+#ifdef __KERNEL__
+
/*
* This struct defines the way the registers are stored on the
* kernel stack during a system call or other kernel entry.
unsigned long icountlevel; /* 60 */
int reserved[1]; /* 64 */
+ /* Additional configurable registers that are used by the compiler. */
+ xtregs_opt_t xtregs_opt;
+
/* Make sure the areg field is 16 bytes aligned. */
int align[0] __attribute__ ((aligned(16)));
unsigned long areg[16]; /* 128 (64) */
};
-#ifdef __KERNEL__
-
#include <asm/variant/core.h>
# define task_pt_regs(tsk) ((struct pt_regs*) \
#define EXCCAUSE_DTLB_SIZE_RESTRICTION 27
#define EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28
#define EXCCAUSE_STORE_CACHE_ATTRIBUTE 29
-#define EXCCAUSE_FLOATING_POINT 40
+#define EXCCAUSE_COPROCESSOR0_DISABLED 32
+#define EXCCAUSE_COPROCESSOR1_DISABLED 33
+#define EXCCAUSE_COPROCESSOR2_DISABLED 34
+#define EXCCAUSE_COPROCESSOR3_DISABLED 35
+#define EXCCAUSE_COPROCESSOR4_DISABLED 36
+#define EXCCAUSE_COPROCESSOR5_DISABLED 37
+#define EXCCAUSE_COPROCESSOR6_DISABLED 38
+#define EXCCAUSE_COPROCESSOR7_DISABLED 39
/* PS register fields. */
struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
unsigned long sc_pc;
unsigned long sc_ps;
unsigned long sc_lbeg;
unsigned long sc_acclo;
unsigned long sc_acchi;
unsigned long sc_a[16];
+ void *sc_xtregs;
};
#endif /* _XTENSA_SIGCONTEXT_H */
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
*/
#ifndef _XTENSA_STAT_H
#define _XTENSA_STAT_H
-#include <linux/types.h>
-
#define STAT_HAVE_NSEC 1
struct stat {
unsigned long st_dev;
- ino_t st_ino;
- mode_t st_mode;
- nlink_t st_nlink;
- uid_t st_uid;
- gid_t st_gid;
- unsigned int st_rdev;
- off_t st_size;
+ unsigned long st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned long st_rdev;
+ long st_size;
unsigned long st_blksize;
unsigned long st_blocks;
unsigned long st_atime;
unsigned long __unused5;
};
-/* This matches struct stat64 in glibc-2.3 */
-
struct stat64 {
unsigned long long st_dev; /* Device */
unsigned long long st_ino; /* File serial number */
unsigned int st_gid; /* Group ID of the file's group. */
unsigned long long st_rdev; /* Device number, if device. */
long long st_size; /* Size of file, in bytes. */
- long st_blksize; /* Optimal block size for I/O. */
+ unsigned long st_blksize; /* Optimal block size for I/O. */
unsigned long __unused2;
-#ifdef __XTENSA_EB__
- unsigned long __unused3;
- long st_blocks; /* Number 512-byte blocks allocated. */
-#else
- long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __unused3;
-#endif
- long st_atime; /* Time of last access. */
+ unsigned long long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long st_atime; /* Time of last access. */
unsigned long st_atime_nsec;
- long st_mtime; /* Time of last modification. */
+ unsigned long st_mtime; /* Time of last modification. */
unsigned long st_mtime_nsec;
- long st_ctime; /* Time of last status change. */
+ unsigned long st_ctime; /* Time of last status change. */
unsigned long st_ctime_nsec;
unsigned long __unused4;
unsigned long __unused5;
return flags & 0xf;
}
-#define RSR_CPENABLE(x) do { \
- __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \
- } while(0);
-#define WSR_CPENABLE(x) do { \
- __asm__ __volatile__("wsr %0," __stringify(CPENABLE)";rsync" \
- :: "a" (x));} while(0);
-
-#define clear_cpenable() __clear_cpenable()
-
-static inline void __clear_cpenable(void)
-{
-#if XCHAL_HAVE_CP
- unsigned long i = 0;
- WSR_CPENABLE(i);
-#endif
-}
-
-static inline void enable_coprocessor(int i)
-{
-#if XCHAL_HAVE_CP
- int cp;
- RSR_CPENABLE(cp);
- cp |= 1 << i;
- WSR_CPENABLE(cp);
-#endif
-}
-
-static inline void disable_coprocessor(int i)
-{
-#if XCHAL_HAVE_CP
- int cp;
- RSR_CPENABLE(cp);
- cp &= ~(1 << i);
- WSR_CPENABLE(cp);
-#endif
-}
#define smp_read_barrier_depends() do { } while(0)
#define read_barrier_depends() do { } while(0)
#define switch_to(prev,next,last) \
do { \
- clear_cpenable(); \
(last) = _switch_to(prev, next); \
} while(0)
"wsr a13," __stringify(SAR) "\n\t"
"wsr a14," __stringify(PS) "\n\t"
:: "a" (&a0), "a" (&ps)
- : "a2", "a3", "a12", "a13", "a14", "a15", "memory");
+ : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory");
}
#define arch_align_stack(x) (x)
#ifndef __ASSEMBLY__
+#if XTENSA_HAVE_COPROCESSORS
+
+typedef struct xtregs_coprocessor {
+ xtregs_cp0_t cp0;
+ xtregs_cp1_t cp1;
+ xtregs_cp2_t cp2;
+ xtregs_cp3_t cp3;
+ xtregs_cp4_t cp4;
+ xtregs_cp5_t cp5;
+ xtregs_cp6_t cp6;
+ xtregs_cp7_t cp7;
+} xtregs_coprocessor_t;
+
+#endif
+
struct thread_info {
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
mm_segment_t addr_limit; /* thread address space */
struct restart_block restart_block;
+ unsigned long cpenable;
+ /* Allocate storage for extra user states and coprocessor states. */
+#if XTENSA_HAVE_COPROCESSORS
+ xtregs_coprocessor_t xtregs_cp;
+#endif
+ xtregs_user_t xtregs_user;
};
#else /* !__ASSEMBLY__ */
* Register access.
*/
-#define WSR_CCOUNT(r) __asm__("wsr %0,"__stringify(CCOUNT) :: "a" (r))
-#define RSR_CCOUNT(r) __asm__("rsr %0,"__stringify(CCOUNT) : "=a" (r))
-#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r))
-#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r))
+#define WSR_CCOUNT(r) asm volatile ("wsr %0,"__stringify(CCOUNT) :: "a" (r))
+#define RSR_CCOUNT(r) asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (r))
+#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r))
+#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r))
static inline unsigned long get_ccount (void)
{
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
+#include <asm/types.h>
/*
* These assembly macros mirror the C macros that follow below. They
* <at> destroyed (actually, (TASK_SIZE + 1 - size))
*/
.macro user_ok aa, as, at, error
- movi \at, (TASK_SIZE+1)
+ movi \at, __XTENSA_UL_CONST(TASK_SIZE)
bgeu \as, \at, \error
sub \at, \at, \as
bgeu \aa, \at, \error
__pu_err; \
})
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- switch (size) { \
- case 1: __put_user_asm(x,ptr,retval,1,"s8i"); break; \
- case 2: __put_user_asm(x,ptr,retval,2,"s16i"); break; \
- case 4: __put_user_asm(x,ptr,retval,4,"s32i"); break; \
- case 8: { \
- __typeof__(*ptr) __v64 = x; \
- retval = __copy_to_user(ptr,&__v64,8); \
- break; \
- } \
- default: __put_user_bad(); \
- } \
+#define __put_user_size(x,ptr,size,retval) \
+do { \
+ int __cb; \
+ retval = 0; \
+ switch (size) { \
+ case 1: __put_user_asm(x,ptr,retval,1,"s8i",__cb); break; \
+ case 2: __put_user_asm(x,ptr,retval,2,"s16i",__cb); break; \
+ case 4: __put_user_asm(x,ptr,retval,4,"s32i",__cb); break; \
+ case 8: { \
+ __typeof__(*ptr) __v64 = x; \
+ retval = __copy_to_user(ptr,&__v64,8); \
+ break; \
+ } \
+ default: __put_user_bad(); \
+ } \
} while (0)
#define __check_align_1 ""
#define __check_align_2 \
- " _bbci.l %2, 0, 1f \n" \
- " movi %0, %3 \n" \
+ " _bbci.l %3, 0, 1f \n" \
+ " movi %0, %4 \n" \
" _j 2f \n"
#define __check_align_4 \
- " _bbsi.l %2, 0, 0f \n" \
- " _bbci.l %2, 1, 1f \n" \
- "0: movi %0, %3 \n" \
+ " _bbsi.l %3, 0, 0f \n" \
+ " _bbci.l %3, 1, 1f \n" \
+ "0: movi %0, %4 \n" \
" _j 2f \n"
* WARNING: If you modify this macro at all, verify that the
* __check_align_* macros still work.
*/
-#define __put_user_asm(x, addr, err, align, insn) \
- __asm__ __volatile__( \
- __check_align_##align \
- "1: "insn" %1, %2, 0 \n" \
- "2: \n" \
- " .section .fixup,\"ax\" \n" \
- " .align 4 \n" \
- "4: \n" \
- " .long 2b \n" \
- "5: \n" \
- " l32r %2, 4b \n" \
- " movi %0, %3 \n" \
- " jx %2 \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " .long 1b, 5b \n" \
- " .previous" \
- :"=r" (err) \
+#define __put_user_asm(x, addr, err, align, insn, cb) \
+ __asm__ __volatile__( \
+ __check_align_##align \
+ "1: "insn" %2, %3, 0 \n" \
+ "2: \n" \
+ " .section .fixup,\"ax\" \n" \
+ " .align 4 \n" \
+ "4: \n" \
+ " .long 2b \n" \
+ "5: \n" \
+ " l32r %1, 4b \n" \
+ " movi %0, %4 \n" \
+ " jx %1 \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " .long 1b, 5b \n" \
+ " .previous" \
+ :"=r" (err), "=r" (cb) \
:"r" ((int)(x)), "r" (addr), "i" (-EFAULT), "0" (err))
#define __get_user_nocheck(x,ptr,size) \
#define __get_user_size(x,ptr,size,retval) \
do { \
+ int __cb; \
retval = 0; \
switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,1,"l8ui"); break; \
- case 2: __get_user_asm(x,ptr,retval,2,"l16ui"); break; \
- case 4: __get_user_asm(x,ptr,retval,4,"l32i"); break; \
+ case 1: __get_user_asm(x,ptr,retval,1,"l8ui",__cb); break; \
+ case 2: __get_user_asm(x,ptr,retval,2,"l16ui",__cb); break; \
+ case 4: __get_user_asm(x,ptr,retval,4,"l32i",__cb); break; \
case 8: retval = __copy_from_user(&x,ptr,8); break; \
default: (x) = __get_user_bad(); \
} \
* WARNING: If you modify this macro at all, verify that the
* __check_align_* macros still work.
*/
-#define __get_user_asm(x, addr, err, align, insn) \
+#define __get_user_asm(x, addr, err, align, insn, cb) \
__asm__ __volatile__( \
__check_align_##align \
- "1: "insn" %1, %2, 0 \n" \
+ "1: "insn" %2, %3, 0 \n" \
"2: \n" \
" .section .fixup,\"ax\" \n" \
" .align 4 \n" \
"4: \n" \
" .long 2b \n" \
"5: \n" \
- " l32r %2, 4b \n" \
- " movi %1, 0 \n" \
- " movi %0, %3 \n" \
- " jx %2 \n" \
+ " l32r %1, 4b \n" \
+ " movi %2, 0 \n" \
+ " movi %0, %4 \n" \
+ " jx %1 \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .long 1b, 5b \n" \
" .previous" \
- :"=r" (err), "=r" (x) \
+ :"=r" (err), "=r" (cb), "=r" (x) \
:"r" (addr), "i" (-EFAULT), "0" (err))
--- /dev/null
+/*
+ * This header file contains assembly-language definitions (assembly
+ * macros, etc.) for this specific Xtensa processor's TIE extensions
+ * and options. It is customized to this Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2008 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/* Selection parameter values for save-area save/restore macros: */
+/* Option vs. TIE: */
+#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
+#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
+/* Whether used automatically by compiler: */
+#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
+/* ABI handling across function calls: */
+#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
+#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
+#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
+/* Misc */
+#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
+
+
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered): ptr (1 byte aligned)
+ * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+ .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
+ xchal_sa_start \continue, \ofs
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+ xchal_sa_align \ptr, 0, 1024-4, 4, 4
+ rur \at1, THREADPTR // threadptr option
+ s32i \at1, \ptr, .Lxchal_ofs_ + 0
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .endif
+ .endm // xchal_ncp_store
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered): ptr (1 byte aligned)
+ * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+ .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
+ xchal_sa_start \continue, \ofs
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+ xchal_sa_align \ptr, 0, 1024-4, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_ + 0
+ wur \at1, THREADPTR // threadptr option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .endif
+ .endm // xchal_ncp_load
+
+
+
+#define XCHAL_NCP_NUM_ATMPS 1
+
+
+#define XCHAL_SA_NUM_ATMPS 1
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
/*
- * Xtensa processor core configuration information.
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality. It is customized to this
+ * Xtensa processor configuration.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1999-2006 Tensilica Inc.
+ * Copyright (C) 1999-2007 Tensilica Inc.
*/
-#ifndef XTENSA_TIE_H
-#define XTENSA_TIE_H
-
-/*----------------------------------------------------------------------
- COPROCESSORS and EXTRA STATE
- ----------------------------------------------------------------------*/
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 0 /* number of coprocessors */
-#define XCHAL_CP_MASK 0x00
+#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
+
+/* Basic parameters of each coprocessor: */
+#define XCHAL_CP7_NAME "XTIOP"
+#define XCHAL_CP7_IDENT XTIOP
+#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
+#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
+
+/* Filler info for unassigned coprocessors, to simplify arrays etc: */
+#define XCHAL_NCP_SA_SIZE 0
+#define XCHAL_NCP_SA_ALIGN 1
+#define XCHAL_CP0_SA_SIZE 0
+#define XCHAL_CP0_SA_ALIGN 1
+#define XCHAL_CP1_SA_SIZE 0
+#define XCHAL_CP1_SA_ALIGN 1
+#define XCHAL_CP2_SA_SIZE 0
+#define XCHAL_CP2_SA_ALIGN 1
+#define XCHAL_CP3_SA_SIZE 0
+#define XCHAL_CP3_SA_ALIGN 1
+#define XCHAL_CP4_SA_SIZE 0
+#define XCHAL_CP4_SA_ALIGN 1
+#define XCHAL_CP5_SA_SIZE 0
+#define XCHAL_CP5_SA_ALIGN 1
+#define XCHAL_CP6_SA_SIZE 0
+#define XCHAL_CP6_SA_ALIGN 1
+
+/* Save area for non-coprocessor optional and custom (TIE) state: */
+#define XCHAL_NCP_SA_SIZE 0
+#define XCHAL_NCP_SA_ALIGN 1
+
+/* Total save area for optional and custom state (NCP + CPn): */
+#define XCHAL_TOTAL_SA_SIZE 0 /* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN 1 /* actual minimum alignment */
+
+#define XCHAL_NCP_SA_NUM 0
+#define XCHAL_NCP_SA_LIST(s)
+#define XCHAL_CP0_SA_NUM 0
+#define XCHAL_CP0_SA_LIST(s)
+#define XCHAL_CP1_SA_NUM 0
+#define XCHAL_CP1_SA_LIST(s)
+#define XCHAL_CP2_SA_NUM 0
+#define XCHAL_CP2_SA_LIST(s)
+#define XCHAL_CP3_SA_NUM 0
+#define XCHAL_CP3_SA_LIST(s)
+#define XCHAL_CP4_SA_NUM 0
+#define XCHAL_CP4_SA_LIST(s)
+#define XCHAL_CP5_SA_NUM 0
+#define XCHAL_CP5_SA_LIST(s)
+#define XCHAL_CP6_SA_NUM 0
+#define XCHAL_CP6_SA_LIST(s)
+#define XCHAL_CP7_SA_NUM 0
+#define XCHAL_CP7_SA_LIST(s)
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
+#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
-#endif /*XTENSA_CONFIG_TIE_H*/
+#endif /*_XTENSA_CORE_TIE_H*/
wait_queue_t ki_wait;
loff_t ki_pos;
- atomic_t ki_bio_count; /* num bio used for this iocb */
void *private;
/* State that we remember to be able to restart/retry */
unsigned short ki_opcode;
gfp_t);
extern void bio_set_pages_dirty(struct bio *bio);
extern void bio_check_pages_dirty(struct bio *bio);
-extern void bio_release_pages(struct bio *bio);
extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int);
extern int bio_uncopy_user(struct bio *);
void zero_fill_bio(struct bio *bio);
unsigned int cmd_len;
unsigned char cmd[BLK_MAX_CDB];
+ unsigned int raw_data_len;
unsigned int data_len;
unsigned int sense_len;
void *data;
typedef int (merge_bvec_fn) (struct request_queue *, struct bio *, struct bio_vec *);
typedef void (prepare_flush_fn) (struct request_queue *, struct request *);
typedef void (softirq_done_fn)(struct request *);
+typedef int (dma_drain_needed_fn)(struct request *);
enum blk_queue_state {
Queue_down,
merge_bvec_fn *merge_bvec_fn;
prepare_flush_fn *prepare_flush_fn;
softirq_done_fn *softirq_done_fn;
+ dma_drain_needed_fn *dma_drain_needed;
/*
* Dispatch queue sorting
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_hardsect_size(struct request_queue *, unsigned short);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
-extern int blk_queue_dma_drain(struct request_queue *q, void *buf,
- unsigned int size);
+extern int blk_queue_dma_drain(struct request_queue *q,
+ dma_drain_needed_fn *dma_drain_needed,
+ void *buf, unsigned int size);
extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern struct block_device *open_by_devnum(dev_t, unsigned);
-extern const struct address_space_operations def_blk_aops;
#else
static inline void bd_forget(struct inode *inode) {}
#endif
/*
* Display a 6 byte device address (MAC) in a readable format.
*/
-extern char *print_mac(char *buf, const unsigned char *addr);
-#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+extern __pure char *print_mac(char *buf, const unsigned char *addr);
#define MAC_BUF_SIZE 18
#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] __maybe_unused
discard it in modules) */
#define __init __section(.init.text) __cold
#define __initdata __section(.init.data)
+#define __initconst __section(.init.rodata)
#define __exitdata __section(.exit.data)
#define __exit_call __used __section(.exitcall.exit)
#define __memexitconst __section(.memexit.rodata)
/* For assembly routines */
+#define __HEAD .section ".head.text","ax"
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
sector_t seek_mean;
struct list_head queue_list;
+ struct hlist_node cic_list;
void (*dtor)(struct io_context *); /* destructor */
void (*exit)(struct io_context *); /* called on task exit */
struct as_io_context *aic;
struct radix_tree_root radix_root;
+ struct hlist_head cic_list;
void *ioc_data;
};
/* size of buffer to pad xfers ending on unaligned boundaries */
ATA_DMA_PAD_SZ = 4,
- ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE,
/* ering size */
ATA_ERING_SIZE = 32,
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
- unsigned int mapped_n_elem;
int dma_dir;
- unsigned int pad_len;
unsigned int sect_size;
unsigned int nbytes;
- unsigned int raw_nbytes;
unsigned int curbytes;
struct scatterlist *cursg;
unsigned int cursg_ofs;
- struct scatterlist *last_sg;
- struct scatterlist saved_last_sg;
struct scatterlist sgent;
- struct scatterlist extra_sg[2];
struct scatterlist *sg;
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
- void *pad; /* array of DMA pad buffers */
- dma_addr_t pad_dma;
-
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
u8 ctl; /* cache of ATA control register */
qc->flags = 0;
qc->cursg = NULL;
qc->cursg_ofs = 0;
- qc->nbytes = qc->raw_nbytes = qc->curbytes = 0;
+ qc->nbytes = qc->curbytes = 0;
qc->n_elem = 0;
- qc->mapped_n_elem = 0;
qc->err_mask = 0;
- qc->pad_len = 0;
- qc->last_sg = NULL;
qc->sect_size = ATA_SECT_SIZE;
ata_tf_init(qc->dev, &qc->tf);
return mask;
}
-static inline int ata_pad_alloc(struct ata_port *ap, struct device *dev)
-{
- ap->pad_dma = 0;
- ap->pad = dmam_alloc_coherent(dev, ATA_DMA_PAD_BUF_SZ,
- &ap->pad_dma, GFP_KERNEL);
- return (ap->pad == NULL) ? -ENOMEM : 0;
-}
-
-static inline void ata_pad_free(struct ata_port *ap, struct device *dev)
-{
- dmam_free_coherent(dev, ATA_DMA_PAD_BUF_SZ, ap->pad, ap->pad_dma);
-}
-
static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
{
return *(struct ata_port **)&host->hostdata[0];
* @mark: Generic packet mark
* @nfct: Associated connection, if any
* @ipvs_property: skbuff is owned by ipvs
+ * @peeked: this packet has been seen already, so stats have been
+ * done for it, don't do them again
* @nf_trace: netfilter packet trace flag
* @nfctinfo: Relationship of this skb to the connection
* @nfct_reasm: netfilter conntrack re-assembly pointer
* @sk_sndmsg_off: cached offset for sendmsg
* @sk_send_head: front of stuff to transmit
* @sk_security: used by security modules
+ * @sk_mark: generic packet mark
* @sk_write_pending: a write to stream socket waits to start
* @sk_state_change: callback to indicate change in the state of the sock
* @sk_data_ready: callback to indicate there is data to be processed
}
/*
+ * default shutdown function
+ */
+static void default_shutdown(unsigned int irq)
+{
+ struct irq_desc *desc = irq_desc + irq;
+
+ desc->chip->mask(irq);
+ desc->status |= IRQ_MASKED;
+}
+
+/*
* Fixup enable/disable function pointers
*/
void irq_chip_set_defaults(struct irq_chip *chip)
chip->disable = default_disable;
if (!chip->startup)
chip->startup = default_startup;
+ /*
+ * We use chip->disable, when the user provided its own. When
+ * we have default_disable set for chip->disable, then we need
+ * to use default_shutdown, otherwise the irq line is not
+ * disabled on free_irq():
+ */
if (!chip->shutdown)
- chip->shutdown = chip->disable;
+ chip->shutdown = chip->disable != default_disable ?
+ chip->disable : default_shutdown;
if (!chip->name)
chip->name = chip->typename;
if (!chip->end)
* This file contains spurious interrupt handling.
*/
+#include <linux/jiffies.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
* otherwise the couter becomes a doomsday timer for otherwise
* working systems
*/
- if (jiffies - desc->last_unhandled > HZ/10)
+ if (time_after(jiffies, desc->last_unhandled + HZ/10))
desc->irqs_unhandled = 1;
else
desc->irqs_unhandled++;
/* Enable to test recovery from slab corruption on boot */
#undef SLUB_RESILIENCY_TEST
-/*
- * Currently fastpath is not supported if preemption is enabled.
- */
-#if defined(CONFIG_FAST_CMPXCHG_LOCAL) && !defined(CONFIG_PREEMPT)
-#define SLUB_FASTPATH
-#endif
-
#if PAGE_SHIFT <= 12
/*
{
void **object;
struct page *new;
-#ifdef SLUB_FASTPATH
- unsigned long flags;
- local_irq_save(flags);
-#endif
if (!c->page)
goto new_slab;
unlock_out:
slab_unlock(c->page);
stat(c, ALLOC_SLOWPATH);
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
return object;
another_slab:
c->page = new;
goto load_freelist;
}
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
+
/*
* No memory available.
*
{
void **object;
struct kmem_cache_cpu *c;
-
-/*
- * The SLUB_FASTPATH path is provisional and is currently disabled if the
- * kernel is compiled with preemption or if the arch does not support
- * fast cmpxchg operations. There are a couple of coming changes that will
- * simplify matters and allow preemption. Ultimately we may end up making
- * SLUB_FASTPATH the default.
- *
- * 1. The introduction of the per cpu allocator will avoid array lookups
- * through get_cpu_slab(). A special register can be used instead.
- *
- * 2. The introduction of per cpu atomic operations (cpu_ops) means that
- * we can realize the logic here entirely with per cpu atomics. The
- * per cpu atomic ops will take care of the preemption issues.
- */
-
-#ifdef SLUB_FASTPATH
- c = get_cpu_slab(s, raw_smp_processor_id());
- do {
- object = c->freelist;
- if (unlikely(is_end(object) || !node_match(c, node))) {
- object = __slab_alloc(s, gfpflags, node, addr, c);
- break;
- }
- stat(c, ALLOC_FASTPATH);
- } while (cmpxchg_local(&c->freelist, object, object[c->offset])
- != object);
-#else
unsigned long flags;
local_irq_save(flags);
stat(c, ALLOC_FASTPATH);
}
local_irq_restore(flags);
-#endif
if (unlikely((gfpflags & __GFP_ZERO) && object))
memset(object, 0, c->objsize);
void **object = (void *)x;
struct kmem_cache_cpu *c;
-#ifdef SLUB_FASTPATH
- unsigned long flags;
-
- local_irq_save(flags);
-#endif
c = get_cpu_slab(s, raw_smp_processor_id());
stat(c, FREE_SLOWPATH);
slab_lock(page);
out_unlock:
slab_unlock(page);
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
return;
slab_empty:
}
slab_unlock(page);
stat(c, FREE_SLAB);
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
discard_slab(s, page);
return;
{
void **object = (void *)x;
struct kmem_cache_cpu *c;
-
-#ifdef SLUB_FASTPATH
- void **freelist;
-
- c = get_cpu_slab(s, raw_smp_processor_id());
- debug_check_no_locks_freed(object, s->objsize);
- do {
- freelist = c->freelist;
- barrier();
- /*
- * If the compiler would reorder the retrieval of c->page to
- * come before c->freelist then an interrupt could
- * change the cpu slab before we retrieve c->freelist. We
- * could be matching on a page no longer active and put the
- * object onto the freelist of the wrong slab.
- *
- * On the other hand: If we already have the freelist pointer
- * then any change of cpu_slab will cause the cmpxchg to fail
- * since the freelist pointers are unique per slab.
- */
- if (unlikely(page != c->page || c->node < 0)) {
- __slab_free(s, page, x, addr, c->offset);
- break;
- }
- object[c->offset] = freelist;
- stat(c, FREE_FASTPATH);
- } while (cmpxchg_local(&c->freelist, freelist, object) != freelist);
-#else
unsigned long flags;
local_irq_save(flags);
__slab_free(s, page, x, addr, c->offset);
local_irq_restore(flags);
-#endif
}
void kmem_cache_free(struct kmem_cache *s, void *x)
{
struct net_device_stats *stats = &dev->stats;
struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
-
+ DECLARE_MAC_BUF(mac);
+ DECLARE_MAC_BUF(mac2);
/* Handle non-VLAN frames if they are sent to us, for example by DHCP.
*
* NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING
pr_debug("%s: about to send skb: %p to dev: %s\n",
__FUNCTION__, skb, skb->dev->name);
- pr_debug(" " MAC_FMT " " MAC_FMT " %4hx %4hx %4hx\n",
- veth->h_dest[0], veth->h_dest[1], veth->h_dest[2],
- veth->h_dest[3], veth->h_dest[4], veth->h_dest[5],
- veth->h_source[0], veth->h_source[1], veth->h_source[2],
- veth->h_source[3], veth->h_source[4], veth->h_source[5],
+ pr_debug(" %s %s %4hx %4hx %4hx\n",
+ print_mac(mac, veth->h_dest), print_mac(mac2, veth->h_source),
veth->h_vlan_proto, veth->h_vlan_TCI,
veth->h_vlan_encapsulated_proto);
sg_set_buf(&sg[index++], data, s);
count -= s;
data += s;
- if (index > limit)
- BUG();
+ BUG_ON(index > limit);
}
return index-start;
unsigned char *p;
int frontlen, len, fragno, ka9qfrag, first = 1;
+ if (paclen < 16) {
+ WARN_ON_ONCE(1);
+ kfree_skb(skb);
+ return;
+ }
+
if ((skb->len - 1) > paclen) {
if (*skb->data == AX25_P_TEXT) {
skb_pull(skb, 1); /* skip PID */
if (start == end)
return;
- ax25->vs = start;
-
/*
* Transmit data until either we're out of data to send or
* the window is full. Send a poll on the final I frame if
/*
* Dequeue the frame and copy it.
+ * Check for race with ax25_clear_queues().
*/
skb = skb_dequeue(&ax25->write_queue);
+ if (!skb)
+ return;
+
+ ax25->vs = start;
do {
if ((skbn = skb_clone(skb, GFP_ATOMIC)) == NULL) {
tasklet_enable(&hdev->tx_task);
skb_queue_purge(&conn->data_q);
hci_conn_del_sysfs(conn);
- hci_dev_put(hdev);
return 0;
}
/* Bluetooth HCI core. */
+#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/kmod.h>
if (!test_bit(HCI_RAW, &hdev->flags)) {
/* ACL tx timeout must be longer than maximum
* link supervision timeout (40.9 seconds) */
- if (!hdev->acl_cnt && (jiffies - hdev->acl_last_tx) > (HZ * 45))
+ if (!hdev->acl_cnt && time_after(jiffies, hdev->acl_last_tx + HZ * 45))
hci_acl_tx_to(hdev);
}
BT_DBG("%s cmd %d", hdev->name, atomic_read(&hdev->cmd_cnt));
- if (!atomic_read(&hdev->cmd_cnt) && (jiffies - hdev->cmd_last_tx) > HZ) {
+ if (!atomic_read(&hdev->cmd_cnt) && time_after(jiffies, hdev->cmd_last_tx + HZ)) {
BT_ERR("%s command tx timeout", hdev->name);
atomic_set(&hdev->cmd_cnt, 1);
}
queue_work(btaddconn, &conn->work);
}
+/*
+ * The rfcomm tty device will possibly retain even when conn
+ * is down, and sysfs doesn't support move zombie device,
+ * so we should move the device before conn device is destroyed.
+ */
static int __match_tty(struct device *dev, void *data)
{
- /* The rfcomm tty device will possibly retain even when conn
- * is down, and sysfs doesn't support move zombie device,
- * so we should move the device before conn device is destroyed.
- * Due to the only child device of hci_conn dev is rfcomm
- * tty_dev, here just return 1
- */
- return 1;
+ return !strncmp(dev->bus_id, "rfcomm", 6);
}
static void del_conn(struct work_struct *work)
{
- struct device *dev;
struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_dev *hdev = conn->hdev;
+
+ while (1) {
+ struct device *dev;
- while (dev = device_find_child(&conn->dev, NULL, __match_tty)) {
+ dev = device_find_child(&conn->dev, NULL, __match_tty);
+ if (!dev)
+ break;
device_move(dev, NULL);
put_device(dev);
}
+
device_del(&conn->dev);
put_device(&conn->dev);
+ hci_dev_put(hdev);
}
void hci_conn_del_sysfs(struct hci_conn *conn)
}
if (neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) {
struct sk_buff *skb = skb_peek(&neigh->arp_queue);
-
+ /* keep skb alive even if arp_queue overflows */
+ if (skb)
+ skb_get(skb);
+ write_unlock(&neigh->lock);
neigh->ops->solicit(neigh, skb);
atomic_inc(&neigh->probes);
- }
+ if (skb)
+ kfree_skb(skb);
+ } else {
out:
- write_unlock(&neigh->lock);
+ write_unlock(&neigh->lock);
+ }
if (notify)
neigh_update_notify(neigh);
EXPORT_SYMBOL_GPL(rtnl_put_cacheinfo);
-static int set_operstate(struct net_device *dev, unsigned char transition, bool send_notification)
+static void set_operstate(struct net_device *dev, unsigned char transition)
{
unsigned char operstate = dev->operstate;
write_lock_bh(&dev_base_lock);
dev->operstate = operstate;
write_unlock_bh(&dev_base_lock);
-
- if (send_notification)
- netdev_state_change(dev);
- return 1;
- } else
- return 0;
+ netdev_state_change(dev);
+ }
}
static void copy_rtnl_link_stats(struct rtnl_link_stats *a,
if (tb[IFLA_BROADCAST]) {
nla_memcpy(dev->broadcast, tb[IFLA_BROADCAST], dev->addr_len);
send_addr_notify = 1;
- modified = 1;
}
if (ifm->ifi_flags || ifm->ifi_change) {
dev_change_flags(dev, flags);
}
- if (tb[IFLA_TXQLEN]) {
- if (dev->tx_queue_len != nla_get_u32(tb[IFLA_TXQLEN])) {
- dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]);
- modified = 1;
- }
- }
+ if (tb[IFLA_TXQLEN])
+ dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]);
if (tb[IFLA_OPERSTATE])
- modified |= set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]), false);
+ set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]));
if (tb[IFLA_LINKMODE]) {
- if (dev->link_mode != nla_get_u8(tb[IFLA_LINKMODE])) {
- write_lock_bh(&dev_base_lock);
- dev->link_mode = nla_get_u8(tb[IFLA_LINKMODE]);
- write_lock_bh(&dev_base_lock);
- modified = 1;
- }
+ write_lock_bh(&dev_base_lock);
+ dev->link_mode = nla_get_u8(tb[IFLA_LINKMODE]);
+ write_unlock_bh(&dev_base_lock);
}
err = 0;
if (send_addr_notify)
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
-
- if (modified)
- netdev_state_change(dev);
-
return err;
}
if (tb[IFLA_TXQLEN])
dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]);
if (tb[IFLA_OPERSTATE])
- set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]), true);
+ set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]));
if (tb[IFLA_LINKMODE])
dev->link_mode = nla_get_u8(tb[IFLA_LINKMODE]);
if (!(neigh->nud_state&NUD_VALID))
printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
dst_ha = neigh->ha;
+ read_lock_bh(&neigh->lock);
} else if ((probes -= neigh->parms->app_probes) < 0) {
#ifdef CONFIG_ARPD
neigh_app_ns(neigh);
arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
dst_ha, dev->dev_addr, NULL);
+ if (dst_ha)
+ read_unlock_bh(&neigh->lock);
}
static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
* Clue in the operator.
*/
printk("IP-Config: Complete:");
- printk("\n device=%s", ic_dev->name);
+ printk("\n device=%s", ic_dev->name);
printk(", addr=%u.%u.%u.%u", NIPQUAD(ic_myaddr));
printk(", mask=%u.%u.%u.%u", NIPQUAD(ic_netmask));
printk(", gw=%u.%u.%u.%u", NIPQUAD(ic_gateway));
}
/*
- * Send a SYN-ACK after having received an ACK.
+ * Send a SYN-ACK after having received a SYN.
* This still operates on a request_sock only, not on a big
* socket.
*/
BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
-#ifdef MODULE
-#if 0 /* FIXME --RR */
- if (!mod_member_present(&__this_module, can_unload))
- return -EINVAL;
-
- __this_module.can_unload = &ipv6_unload;
-#endif
-#endif
err = proto_register(&tcpv6_prot, 1);
if (err)
goto out;
fn = fn->parent;
}
/* No more references are possible at this point. */
- if (atomic_read(&rt->rt6i_ref) != 1) BUG();
+ BUG_ON(atomic_read(&rt->rt6i_ref) != 1);
}
inet6_rt_notify(RTM_DELROUTE, rt, info);
ip_rt_put(rt);
goto out;
}
+ skb2->dst = (struct dst_entry *)rt;
} else {
ip_rt_put(rt);
if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos,
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
int res;
+ bool need_hw_reconfig = 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
res = local->ops->start(local_to_hw(local));
if (res)
return res;
- ieee80211_hw_config(local);
+ need_hw_reconfig = 1;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
atomic_inc(&local->iff_promiscs);
local->open_count++;
+ if (need_hw_reconfig)
+ ieee80211_hw_config(local);
netif_start_queue(dev);
* NetLabel Generic NETLINK Command Definitions
*/
-static struct genl_ops netlbl_cipsov4_genl_c_add = {
+static struct genl_ops netlbl_cipsov4_ops[] = {
+ {
.cmd = NLBL_CIPSOV4_C_ADD,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_cipsov4_genl_policy,
.doit = netlbl_cipsov4_add,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_cipsov4_genl_c_remove = {
+ },
+ {
.cmd = NLBL_CIPSOV4_C_REMOVE,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_cipsov4_genl_policy,
.doit = netlbl_cipsov4_remove,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_cipsov4_genl_c_list = {
+ },
+ {
.cmd = NLBL_CIPSOV4_C_LIST,
.flags = 0,
.policy = netlbl_cipsov4_genl_policy,
.doit = netlbl_cipsov4_list,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_cipsov4_genl_c_listall = {
+ },
+ {
.cmd = NLBL_CIPSOV4_C_LISTALL,
.flags = 0,
.policy = netlbl_cipsov4_genl_policy,
.doit = NULL,
.dumpit = netlbl_cipsov4_listall,
+ },
};
/*
* mechanism. Returns zero on success, negative values on failure.
*
*/
-int netlbl_cipsov4_genl_init(void)
+int __init netlbl_cipsov4_genl_init(void)
{
- int ret_val;
+ int ret_val, i;
ret_val = genl_register_family(&netlbl_cipsov4_gnl_family);
if (ret_val != 0)
return ret_val;
- ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
- &netlbl_cipsov4_genl_c_add);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
- &netlbl_cipsov4_genl_c_remove);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
- &netlbl_cipsov4_genl_c_list);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
- &netlbl_cipsov4_genl_c_listall);
- if (ret_val != 0)
- return ret_val;
+ for (i = 0; i < ARRAY_SIZE(netlbl_cipsov4_ops); i++) {
+ ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
+ &netlbl_cipsov4_ops[i]);
+ if (ret_val != 0)
+ return ret_val;
+ }
return 0;
}
* values on error.
*
*/
-int netlbl_domhsh_init(u32 size)
+int __init netlbl_domhsh_init(u32 size)
{
u32 iter;
struct netlbl_domhsh_tbl *hsh_tbl;
* NetLabel Generic NETLINK Command Definitions
*/
-static struct genl_ops netlbl_mgmt_genl_c_add = {
+static struct genl_ops netlbl_mgmt_genl_ops[] = {
+ {
.cmd = NLBL_MGMT_C_ADD,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_mgmt_genl_policy,
.doit = netlbl_mgmt_add,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_remove = {
+ },
+ {
.cmd = NLBL_MGMT_C_REMOVE,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_mgmt_genl_policy,
.doit = netlbl_mgmt_remove,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_listall = {
+ },
+ {
.cmd = NLBL_MGMT_C_LISTALL,
.flags = 0,
.policy = netlbl_mgmt_genl_policy,
.doit = NULL,
.dumpit = netlbl_mgmt_listall,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_adddef = {
+ },
+ {
.cmd = NLBL_MGMT_C_ADDDEF,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_mgmt_genl_policy,
.doit = netlbl_mgmt_adddef,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_removedef = {
+ },
+ {
.cmd = NLBL_MGMT_C_REMOVEDEF,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_mgmt_genl_policy,
.doit = netlbl_mgmt_removedef,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_listdef = {
+ },
+ {
.cmd = NLBL_MGMT_C_LISTDEF,
.flags = 0,
.policy = netlbl_mgmt_genl_policy,
.doit = netlbl_mgmt_listdef,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_protocols = {
+ },
+ {
.cmd = NLBL_MGMT_C_PROTOCOLS,
.flags = 0,
.policy = netlbl_mgmt_genl_policy,
.doit = NULL,
.dumpit = netlbl_mgmt_protocols,
-};
-
-static struct genl_ops netlbl_mgmt_genl_c_version = {
+ },
+ {
.cmd = NLBL_MGMT_C_VERSION,
.flags = 0,
.policy = netlbl_mgmt_genl_policy,
.doit = netlbl_mgmt_version,
.dumpit = NULL,
+ },
};
/*
* mechanism. Returns zero on success, negative values on failure.
*
*/
-int netlbl_mgmt_genl_init(void)
+int __init netlbl_mgmt_genl_init(void)
{
- int ret_val;
+ int ret_val, i;
ret_val = genl_register_family(&netlbl_mgmt_gnl_family);
if (ret_val != 0)
return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_add);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_remove);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_listall);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_adddef);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_removedef);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_listdef);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_protocols);
- if (ret_val != 0)
- return ret_val;
- ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
- &netlbl_mgmt_genl_c_version);
- if (ret_val != 0)
- return ret_val;
+ for (i = 0; i < ARRAY_SIZE(netlbl_mgmt_genl_ops); i++) {
+ ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
+ &netlbl_mgmt_genl_ops[i]);
+ if (ret_val != 0)
+ return ret_val;
+ }
return 0;
}
* NetLabel Generic NETLINK Command Definitions
*/
-static struct genl_ops netlbl_unlabel_genl_c_staticadd = {
+static struct genl_ops netlbl_unlabel_genl_ops[] = {
+ {
.cmd = NLBL_UNLABEL_C_STATICADD,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_unlabel_genl_policy,
.doit = netlbl_unlabel_staticadd,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_staticremove = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_STATICREMOVE,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_unlabel_genl_policy,
.doit = netlbl_unlabel_staticremove,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_staticlist = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_STATICLIST,
.flags = 0,
.policy = netlbl_unlabel_genl_policy,
.doit = NULL,
.dumpit = netlbl_unlabel_staticlist,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_staticadddef = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_STATICADDDEF,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_unlabel_genl_policy,
.doit = netlbl_unlabel_staticadddef,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_staticremovedef = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_STATICREMOVEDEF,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_unlabel_genl_policy,
.doit = netlbl_unlabel_staticremovedef,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_staticlistdef = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_STATICLISTDEF,
.flags = 0,
.policy = netlbl_unlabel_genl_policy,
.doit = NULL,
.dumpit = netlbl_unlabel_staticlistdef,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_accept = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_ACCEPT,
.flags = GENL_ADMIN_PERM,
.policy = netlbl_unlabel_genl_policy,
.doit = netlbl_unlabel_accept,
.dumpit = NULL,
-};
-
-static struct genl_ops netlbl_unlabel_genl_c_list = {
+ },
+ {
.cmd = NLBL_UNLABEL_C_LIST,
.flags = 0,
.policy = netlbl_unlabel_genl_policy,
.doit = netlbl_unlabel_list,
.dumpit = NULL,
+ },
};
/*
* mechanism. Returns zero on success, negative values on failure.
*
*/
-int netlbl_unlabel_genl_init(void)
+int __init netlbl_unlabel_genl_init(void)
{
- int ret_val;
+ int ret_val, i;
ret_val = genl_register_family(&netlbl_unlabel_gnl_family);
if (ret_val != 0)
return ret_val;
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_staticadd);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_staticremove);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_staticlist);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_staticadddef);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_staticremovedef);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_staticlistdef);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_accept);
- if (ret_val != 0)
- return ret_val;
-
- ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
- &netlbl_unlabel_genl_c_list);
- if (ret_val != 0)
- return ret_val;
+ for (i = 0; i < ARRAY_SIZE(netlbl_unlabel_genl_ops); i++) {
+ ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
+ &netlbl_unlabel_genl_ops[i]);
+ if (ret_val != 0)
+ return ret_val;
+ }
return 0;
}
* non-zero values on error.
*
*/
-int netlbl_unlabel_init(u32 size)
+int __init netlbl_unlabel_init(u32 size)
{
u32 iter;
struct netlbl_unlhsh_tbl *hsh_tbl;
* and to send unlabeled network traffic by default.
*
*/
-int netlbl_unlabel_defconf(void)
+int __init netlbl_unlabel_defconf(void)
{
int ret_val;
struct netlbl_dom_map *entry;
* non-zero on failure.
*
*/
-int netlbl_netlink_init(void)
+int __init netlbl_netlink_init(void)
{
int ret_val;
false);
spin_unlock(&call->lock);
notification = NULL;
- if (ret < 0)
- BUG();
+ BUG_ON(ret < 0);
}
spin_unlock(&call->conn->state_lock);
spin_lock_bh(&call->lock);
ret = rxrpc_queue_rcv_skb(call, skb, true, fatal);
spin_unlock_bh(&call->lock);
- if (ret < 0)
- BUG();
+ BUG_ON(ret < 0);
}
return 0;
struct hlist_head *ndsttable,
unsigned int nhashmask)
{
- struct hlist_node *entry, *tmp;
+ struct hlist_node *entry, *tmp, *entry0 = NULL;
struct xfrm_policy *pol;
+ unsigned int h0 = 0;
+redo:
hlist_for_each_entry_safe(pol, entry, tmp, list, bydst) {
unsigned int h;
h = __addr_hash(&pol->selector.daddr, &pol->selector.saddr,
pol->family, nhashmask);
- hlist_add_head(&pol->bydst, ndsttable+h);
+ if (!entry0) {
+ hlist_del(entry);
+ hlist_add_head(&pol->bydst, ndsttable+h);
+ h0 = h;
+ } else {
+ if (h != h0)
+ continue;
+ hlist_del(entry);
+ hlist_add_after(entry0, &pol->bydst);
+ }
+ entry0 = entry;
+ }
+ if (!hlist_empty(list)) {
+ entry0 = NULL;
+ goto redo;
}
}
"annotate %s with a matching annotation.\n",
from, sec2annotation(fromsec), fromsym, from_p,
to, sec2annotation(tosec), tosym, to_p,
- fromsym, tosym, fromsym);
+ tosym, fromsym, tosym);
break;
case INIT_TO_EXIT:
fprintf(stderr,
switch (smack_net_nltype) {
case NETLBL_NLTYPE_CIPSOV4:
- nlsp->domain = NULL;
- nlsp->flags = NETLBL_SECATTR_DOMAIN;
- nlsp->flags |= NETLBL_SECATTR_MLS_LVL;
+ nlsp->domain = kstrdup(smack, GFP_ATOMIC);
+ nlsp->flags = NETLBL_SECATTR_DOMAIN | NETLBL_SECATTR_MLS_LVL;
rc = smack_to_cipso(smack, &cipso);
if (rc == 0) {
{
struct socket_smack *ssp;
struct netlbl_lsm_secattr secattr;
- int rc = 0;
+ int rc;
ssp = sk->sk_security;
netlbl_secattr_init(&secattr);
smack_to_secattr(ssp->smk_out, &secattr);
- if (secattr.flags != NETLBL_SECATTR_NONE)
- rc = netlbl_sock_setattr(sk, &secattr);
-
+ rc = netlbl_sock_setattr(sk, &secattr);
netlbl_secattr_destroy(&secattr);
+
return rc;
}
struct inode_smack *nsp = inode->i_security;
struct socket_smack *ssp;
struct socket *sock;
+ int rc = 0;
if (value == NULL || size > SMK_LABELLEN)
return -EACCES;
ssp->smk_in = sp;
else if (strcmp(name, XATTR_SMACK_IPOUT) == 0) {
ssp->smk_out = sp;
- return smack_netlabel(sock->sk);
+ rc = smack_netlabel(sock->sk);
+ if (rc != 0)
+ printk(KERN_WARNING "Smack: \"%s\" netlbl error %d.\n",
+ __func__, -rc);
} else
return -EOPNOTSUPP;
ssp->smk_packet[0] = '\0';
rc = smack_netlabel(sk);
+ if (rc != 0)
+ printk(KERN_WARNING "Smack: \"%s\" netlbl error %d.\n",
+ __func__, -rc);
}
/**
}
/*
+ * smack_secctx_to_secid - return the secid for a smack label
+ * @secdata: smack label
+ * @seclen: how long result is
+ * @secid: outgoing integer
+ *
+ * Exists for audit and networking code.
+ */
+static int smack_secctx_to_secid(char *secdata, u32 seclen, u32 *secid)
+{
+ *secid = smack_to_secid(secdata);
+ return 0;
+}
+
+/*
* smack_release_secctx - don't do anything.
* @key_ref: unused
* @context: unused
.key_permission = smack_key_permission,
#endif /* CONFIG_KEYS */
.secid_to_secctx = smack_secid_to_secctx,
+ .secctx_to_secid = smack_secctx_to_secid,
.release_secctx = smack_release_secctx,
};
#include <net/cipso_ipv4.h>
#include <linux/seq_file.h>
#include <linux/ctype.h>
+#include <linux/audit.h>
#include "smack.h"
/*
*/
static DEFINE_MUTEX(smack_list_lock);
static DEFINE_MUTEX(smack_cipso_lock);
+static DEFINE_MUTEX(smack_ambient_lock);
/*
* This is the "ambient" label for network traffic.
struct cipso_v4_doi *doip;
struct netlbl_audit audit_info;
+ audit_info.loginuid = audit_get_loginuid(current);
+ audit_info.secid = smack_to_secid(current->security);
+
rc = netlbl_cfg_map_del(NULL, &audit_info);
if (rc != 0)
printk(KERN_WARNING "%s:%d remove rc = %d\n",
__func__, __LINE__, rc);
}
+/**
+ * smk_unlbl_ambient - initialize the unlabeled domain
+ */
+void smk_unlbl_ambient(char *oldambient)
+{
+ int rc;
+ struct netlbl_audit audit_info;
+
+ audit_info.loginuid = audit_get_loginuid(current);
+ audit_info.secid = smack_to_secid(current->security);
+
+ if (oldambient != NULL) {
+ rc = netlbl_cfg_map_del(oldambient, &audit_info);
+ if (rc != 0)
+ printk(KERN_WARNING "%s:%d remove rc = %d\n",
+ __func__, __LINE__, rc);
+ }
+
+ rc = netlbl_cfg_unlbl_add_map(smack_net_ambient, &audit_info);
+ if (rc != 0)
+ printk(KERN_WARNING "%s:%d add rc = %d\n",
+ __func__, __LINE__, rc);
+}
+
/*
* Seq_file read operations for /smack/cipso
*/
size_t cn, loff_t *ppos)
{
ssize_t rc;
- char out[SMK_LABELLEN];
int asize;
if (*ppos != 0)
/*
* Being careful to avoid a problem in the case where
* smack_net_ambient gets changed in midstream.
- * Since smack_net_ambient is always set with a value
- * from the label list, including initially, and those
- * never get freed, the worst case is that the pointer
- * gets changed just after this strncpy, in which case
- * the value passed up is incorrect. Locking around
- * smack_net_ambient wouldn't be any better than this
- * copy scheme as by the time the caller got to look
- * at the ambient value it would have cleared the lock
- * and been changed.
*/
- strncpy(out, smack_net_ambient, SMK_LABELLEN);
- asize = strlen(out) + 1;
+ mutex_lock(&smack_ambient_lock);
- if (cn < asize)
- return -EINVAL;
+ asize = strlen(smack_net_ambient) + 1;
+
+ if (cn >= asize)
+ rc = simple_read_from_buffer(buf, cn, ppos,
+ smack_net_ambient, asize);
+ else
+ rc = -EINVAL;
- rc = simple_read_from_buffer(buf, cn, ppos, out, asize);
+ mutex_unlock(&smack_ambient_lock);
return rc;
}
size_t count, loff_t *ppos)
{
char in[SMK_LABELLEN];
+ char *oldambient;
char *smack;
if (!capable(CAP_MAC_ADMIN))
if (smack == NULL)
return -EINVAL;
+ mutex_lock(&smack_ambient_lock);
+
+ oldambient = smack_net_ambient;
smack_net_ambient = smack;
+ smk_unlbl_ambient(oldambient);
+
+ mutex_unlock(&smack_ambient_lock);
return count;
}
sema_init(&smack_write_sem, 1);
smk_cipso_doi();
+ smk_unlbl_ambient(NULL);
return err;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff