drivers/edac: Lindent r82600

Run r82600_edac.c file through Lindent for cleanup

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index 4285958..18206ce 100644 (file)
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -133,8 +133,8 @@ struct r82600_error_info {
 
 static unsigned int disable_hardware_scrub = 0;
 
-static void r82600_get_error_info (struct mem_ctl_info *mci,
-               struct r82600_error_info *info)
+static void r82600_get_error_info(struct mem_ctl_info *mci,
+                                 struct r82600_error_info *info)
 {
        struct pci_dev *pdev;
 
@@ -144,18 +144,19 @@ static void r82600_get_error_info (struct mem_ctl_info *mci,
        if (info->eapr & BIT(0))
                /* Clear error to allow next error to be reported [p.62] */
                pci_write_bits32(pdev, R82600_EAP,
-                               ((u32) BIT(0) & (u32) BIT(1)),
-                               ((u32) BIT(0) & (u32) BIT(1)));
+                                ((u32) BIT(0) & (u32) BIT(1)),
+                                ((u32) BIT(0) & (u32) BIT(1)));
 
        if (info->eapr & BIT(1))
                /* Clear error to allow next error to be reported [p.62] */
                pci_write_bits32(pdev, R82600_EAP,
-                               ((u32) BIT(0) & (u32) BIT(1)),
-                               ((u32) BIT(0) & (u32) BIT(1)));
+                                ((u32) BIT(0) & (u32) BIT(1)),
+                                ((u32) BIT(0) & (u32) BIT(1)));
 }
 
-static int r82600_process_error_info (struct mem_ctl_info *mci,
-               struct r82600_error_info *info, int handle_errors)
+static int r82600_process_error_info(struct mem_ctl_info *mci,
+                                    struct r82600_error_info *info,
+                                    int handle_errors)
 {
        int error_found;
        u32 eapaddr, page;
@@ -172,25 +173,23 @@ static int r82600_process_error_info (struct mem_ctl_info *mci,
         * granularity (upper 19 bits only)     */
        page = eapaddr >> PAGE_SHIFT;
 
-       if (info->eapr & BIT(0)) {  /* CE? */
+       if (info->eapr & BIT(0)) {      /* CE? */
                error_found = 1;
 
                if (handle_errors)
-                       edac_mc_handle_ce(mci, page, 0,  /* not avail */
-                                       syndrome,
-                                       edac_mc_find_csrow_by_page(mci, page),
-                                       0,  /* channel */
-                                       mci->ctl_name);
+                       edac_mc_handle_ce(mci, page, 0, /* not avail */
+                                         syndrome, edac_mc_find_csrow_by_page(mci, page), 0,   /* channel */
+                                         mci->ctl_name);
        }
 
-       if (info->eapr & BIT(1)) {  /* UE? */
+       if (info->eapr & BIT(1)) {      /* UE? */
                error_found = 1;
 
                if (handle_errors)
                        /* 82600 doesn't give enough info */
                        edac_mc_handle_ue(mci, page, 0,
-                               edac_mc_find_csrow_by_page(mci, page),
-                               mci->ctl_name);
+                                         edac_mc_find_csrow_by_page(mci, page),
+                                         mci->ctl_name);
        }
 
        return error_found;
@@ -211,11 +210,11 @@ static inline int ecc_enabled(u8 dramcr)
 }
 
 static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
-               u8 dramcr)
+                              u8 dramcr)
 {
        struct csrow_info *csrow;
        int index;
-       u8 drbar;  /* SDRAM Row Boundry Address Register */
+       u8 drbar;               /* SDRAM Row Boundry Address Register */
        u32 row_high_limit, row_high_limit_last;
        u32 reg_sdram, ecc_on, row_base;
 
@@ -309,12 +308,12 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
        mci->edac_check = r82600_check;
        mci->ctl_page_to_phys = NULL;
        r82600_init_csrows(mci, pdev, dramcr);
-       r82600_get_error_info(mci, &discard);  /* clear counters */
+       r82600_get_error_info(mci, &discard);   /* clear counters */
 
        /* Here we assume that we will never see multiple instances of this
         * type of memory controller.  The ID is therefore hardcoded to 0.
         */
-       if (edac_mc_add_mc(mci,0)) {
+       if (edac_mc_add_mc(mci, 0)) {
                debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
                goto fail;
        }
@@ -330,14 +329,14 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
        debugf3("%s(): success\n", __func__);
        return 0;
 
-fail:
+      fail:
        edac_mc_free(mci);
        return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */
 static int __devinit r82600_init_one(struct pci_dev *pdev,
-               const struct pci_device_id *ent)
+                                    const struct pci_device_id *ent)
 {
        debugf0("%s()\n", __func__);
 
@@ -359,11 +358,11 @@ static void __devexit r82600_remove_one(struct pci_dev *pdev)
 
 static const struct pci_device_id r82600_pci_tbl[] __devinitdata = {
        {
-               PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
-       },
+        PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
+        },
        {
-               0,
-       }       /* 0 terminated list. */
+        0,
+        }                      /* 0 terminated list. */
 };
 
 MODULE_DEVICE_TABLE(pci, r82600_pci_tbl);
@@ -390,7 +389,7 @@ module_exit(r82600_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD Ltd. "
-       "on behalf of EADS Astrium");
+             "on behalf of EADS Astrium");
 MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers");
 
 module_param(disable_hardware_scrub, bool, 0644);