The interaction of the iflag bits is as follows (parity error
given as an example):
Parity error INPCK IGNPAR
- None n/a n/a character received
- Yes n/a 0 character discarded
- Yes 0 1 character received, marked as
+ n/a 0 n/a character received, marked as
TTY_NORMAL
- Yes 1 1 character received, marked as
+ None 1 n/a character received, marked as
+ TTY_NORMAL
+ Yes 1 0 character received, marked as
TTY_PARITY
+ Yes 1 1 character discarded
Other flags may be used (eg, xon/xoff characters) if your
hardware supports hardware "soft" flow control.
P: Arnd Bergmann
M: arnd@arndb.de
L: linuxppc-dev@ozlabs.org
-W: http://linuxppc64.org
+W: http://www.penguinppc.org/ppc64/
+S: Supported
+
+BROADCOM BNX2 GIGABIT ETHERNET DRIVER
+P: Michael Chan
+M: mchan@broadcom.com
+L: netdev@vger.kernel.org
+S: Supported
+
+BROADCOM TG3 GIGABIT ETHERNET DRIVER
+P: Michael Chan
+M: mchan@broadcom.com
+L: netdev@vger.kernel.org
S: Supported
BTTV VIDEO4LINUX DRIVER
P: Anton Blanchard
M: anton@samba.org
M: anton@au.ibm.com
-W: http://linuxppc64.org
+W: http://www.penguinppc.org/ppc64/
L: linuxppc-dev@ozlabs.org
S: Supported
W: http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
S: Maintained
+MULTIMEDIA CARD SUBSYSTEM
+P: Russell King
+M: rmk+mmc@arm.linux.org.uk
+S: Maintained
+
MULTISOUND SOUND DRIVER
P: Andrew Veliath
M: andrewtv@usa.net
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 17
-EXTRAVERSION =-rc5
-NAME=Lordi Rules
+EXTRAVERSION =-rc6
+NAME=Crazed Snow-Weasel
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
EXPORT_SYMBOL(smp_call_function);
EXPORT_SYMBOL(smp_call_function_on_cpu);
EXPORT_SYMBOL(_atomic_dec_and_lock);
-EXPORT_SYMBOL(cpu_present_mask);
#endif /* CONFIG_SMP */
/*
if (cpuid != boot_cpuid) {
flags |= 0x00040000UL; /* "remain halted" */
*pflags = flags;
- clear_bit(cpuid, &cpu_present_mask);
+ cpu_clear(cpuid, cpu_present_map);
halt();
}
#endif
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
- cpu_clear(boot_cpuid, cpu_possible_map);
- while (cpus_weight(cpu_possible_map))
+ cpu_clear(boot_cpuid, cpu_present_map);
+ while (cpus_weight(cpu_present_map))
barrier();
#endif
static int smp_secondary_alive __initdata = 0;
/* Which cpus ids came online. */
-cpumask_t cpu_present_mask;
cpumask_t cpu_online_map;
EXPORT_SYMBOL(cpu_online_map);
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
/* Assume here that "whami" == index */
- cpu_set(i, cpu_present_mask);
+ cpu_set(i, cpu_present_map);
cpu->pal_revision = boot_cpu_palrev;
}
}
} else {
smp_num_probed = 1;
- cpu_set(boot_cpuid, cpu_present_mask);
}
- printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
- smp_num_probed, cpu_possible_map.bits[0]);
+ printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n",
+ smp_num_probed, cpu_present_map.bits[0]);
}
/*
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
- cpu_present_mask = cpumask_of_cpu(boot_cpuid);
+ cpu_present_map = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}
void __devinit
smp_prepare_boot_cpu(void)
{
- /*
- * Mark the boot cpu (current cpu) as online
- */
- cpu_set(smp_processor_id(), cpu_online_map);
}
int __devinit
register int bcpu = boot_cpuid;
#ifdef CONFIG_SMP
- cpumask_t cpm = cpu_present_mask;
+ cpumask_t cpm = cpu_present_map;
volatile unsigned long *dim0, *dim1, *dim2, *dim3;
unsigned long mask0, mask1, mask2, mask3, dummy;
help
Choice for UART for kernel low-level using S3C2410 UARTS,
should be between zero and two. The port must have been
- initalised by the boot-loader before use.
+ initialised by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C2410_LOWLEVEL_UART_PORT.
static void ixp23xx_irq_mask(unsigned int irq)
{
- volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+ volatile unsigned long *intr_reg;
+ if (irq >= 56)
+ irq += 8;
+
+ intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg &= ~(1 << (irq % 32));
}
*/
static void ixp23xx_irq_level_unmask(unsigned int irq)
{
- volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+ volatile unsigned long *intr_reg;
ixp23xx_irq_ack(irq);
+ if (irq >= 56)
+ irq += 8;
+
+ intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
static void ixp23xx_irq_edge_unmask(unsigned int irq)
{
- volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+ volatile unsigned long *intr_reg;
+
+ if (irq >= 56)
+ irq += 8;
+ intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access PCI This allows
for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
- The disadvantadge of this is that every PCI access requires
+ The disadvantage of this is that every PCI access requires
three local register accesses plus a spinlock, but in some
cases the performance hit is acceptable. In addition, you cannot
mmap() PCI devices in this case due to the indirect nature
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.phys_io = 0x40000000,
+ .boot_params = 0xa0000100, /* BLOB boot parameter setting */
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = mainstone_map_io,
.init_irq = mainstone_init_irq,
depends on ARCH_S3C2410 && PM
help
Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+ Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C2410_PM_CHECK
ecc_mask = 0;
}
- if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+ if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
if (mem_types[i].prot_l1)
mem_types[i].prot_l1 |= PMD_BIT4;
pgd = init_mm.pgd;
base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
- if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+ if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
base_pmdval |= PMD_BIT4;
for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
#endif
mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg
mrc p15, 0, r0, c1, c0, 0 @ get control register
- bic r0, r0, #0x0200 @ .... ..R. .... ....
bic r0, r0, #0x0002 @ .... .... .... ..A.
orr r0, r0, #0x0005 @ .... .... .... .C.M
#if BTB_ENABLE
+ bic r0, r0, #0x0200 @ .... ..R. .... ....
orr r0, r0, #0x3900 @ ..VI Z..S .... ....
#else
+ bic r0, r0, #0x0a00 @ .... Z.R. .... ....
orr r0, r0, #0x3100 @ ..VI ...S .... ....
#endif
#if L2_CACHE_ENABLE
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
},
},
- {
- .callback = disable_acpi_pci,
- .ident = "HP xw9300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
- },
- },
{}
};
int i;
for (i = 0; apic_probe[i]; ++i) {
if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) {
- genapic = apic_probe[i];
- printk(KERN_INFO "Switched to APIC driver `%s'.\n",
- genapic->name);
+ if (!cmdline_apic) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+ genapic->name);
+ }
return 1;
}
}
int i;
for (i = 0; apic_probe[i]; ++i) {
if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
- genapic = apic_probe[i];
- printk(KERN_INFO "Switched to APIC driver `%s'.\n",
- genapic->name);
+ if (!cmdline_apic) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+ genapic->name);
+ }
return 1;
}
}
default SGI_IP22
config MIPS_MTX1
- bool "Support for 4G Systems MTX-1 board"
+ bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_COBALT
- bool "Support for Cobalt Server"
+ bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
select I8259
select SYS_SUPPORTS_LITTLE_ENDIAN
config MACH_DECSTATION
- bool "Support for DECstations"
+ bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select EARLY_PRINTK
otherwise choose R3000.
config MIPS_EV64120
- bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+ bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
kernel for this platform.
config MIPS_EV96100
- bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+ bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
here if you wish to build a kernel for this platform.
config MIPS_IVR
- bool "Support for Globespan IVR board"
+ bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
build a kernel for this platform.
config MIPS_ITE8172
- bool "Support for ITE 8172G board"
+ bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
a kernel for this platform.
config MACH_JAZZ
- bool "Support for the Jazz family of machines"
+ bool "Jazz family of machines"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
Olivetti M700-10 workstations.
config LASAT
- bool "Support for LASAT Networks platforms"
+ bool "LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_GT64120
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_ATLAS
- bool "Support for MIPS Atlas board"
+ bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
board.
config MIPS_MALTA
- bool "Support for MIPS Malta board"
+ bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
board.
config MIPS_SEAD
- bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+ bool "MIPS SEAD board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
board.
config MIPS_SIM
- bool 'Support for MIPS simulator (MIPSsim)'
+ bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
emulator.
config MOMENCO_JAGUAR_ATX
- bool "Support for Momentum Jaguar board"
+ bool "Momentum Jaguar board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT
- bool "Support for Momentum Ocelot board"
+ bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_3
- bool "Support for Momentum Ocelot-3 board"
+ bool "Momentum Ocelot-3 board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
PMC-Sierra Rm79000 core.
config MOMENCO_OCELOT_C
- bool "Support for Momentum Ocelot-C board"
+ bool "Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_G
- bool "Support for Momentum Ocelot-G board"
+ bool "Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
Momentum Computer <http://www.momenco.com/>.
config MIPS_XXS1500
- bool "Support for MyCable XXS1500 board"
+ bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_V2PCI
- bool "Support for Philips PNX8550 based Viper2-PCI board"
+ bool "Philips PNX8550 based Viper2-PCI board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
- bool "Support for Philips PNX8550 based JBS board"
+ bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5074
- bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+ bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DDB5XXX_COMMON
select DMA_NONCOHERENT
evaluation board.
config DDB5476
- bool "Support for NEC DDB Vrc-5476"
+ bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
IDE controller, PS2 keyboard, PS2 mouse, etc.
config DDB5477
- bool "Support for NEC DDB Vrc-5477"
+ bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HW_HAS_PCI
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
- bool "Support for NEC VR4100 series based machines"
+ bool "NEC VR41XX-based machines"
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
- bool "Support for PMC-Sierra Yosemite eval board"
+ bool "PMC-Sierra Yosemite eval board"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
manufactured by PMC-Sierra.
config QEMU
- bool "Support for Qemu"
+ bool "Qemu"
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
- bool "Support for SGI IP22 (Indy/Indigo2)"
+ bool "SGI IP22 (Indy/Indigo2)"
select ARC
select ARC32
select BOOT_ELF32
that runs on these, say Y here.
config SGI_IP27
- bool "Support for SGI IP27 (Origin200/2000)"
+ bool "SGI IP27 (Origin200/2000)"
select ARC
select ARC64
select BOOT_ELF64
here.
config SGI_IP32
- bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+ bool "SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select ARC
select ARC32
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
- bool "Support for Sibyte BCM91480B-BigSur"
+ bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SWARM
- bool "Support for Sibyte BCM91250A-SWARM"
+ bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select SIBYTE_SB1250
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
- bool "Support for Sibyte BCM91250E-Sentosa"
+ bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
- bool "Support for Sibyte BCM91125E-Rhone"
+ bool "Sibyte BCM91125E-Rhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CARMEL
- bool "Support for Sibyte BCM91120x-Carmel"
+ bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_PTSWARM
- bool "Support for Sibyte BCM91250PT-PTSWARM"
+ bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_LITTLESUR
- bool "Support for Sibyte BCM91250C2-LittleSur"
+ bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHINE
- bool "Support for Sibyte BCM91120C-CRhine"
+ bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHONE
- bool "Support for Sibyte BCM91125C-CRhone"
+ bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
- bool "Support for SNI RM200 PCI"
+ bool "SNI RM200 PCI"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
support this machine type.
config TOSHIBA_JMR3927
- bool "Support for Toshiba JMR-TX3927 board"
+ bool "Toshiba JMR-TX3927 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
select TOSHIBA_BOARDS
config TOSHIBA_RBTX4927
- bool "Support for Toshiba TBTX49[23]7 board"
+ bool "Toshiba TBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
support this machine type
config TOSHIBA_RBTX4938
- bool "Support for Toshiba RBTX4938 board"
+ bool "Toshiba RBTX4938 board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
config PAGE_SIZE_16KB
bool "16kB"
- depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+ depends on !CPU_R3000 && !CPU_TX39XX
help
Using 16kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
- all non-R3000 family processor. Not that at the time of this
- writing this option is still high experimental; there are also
- issues with compatibility of user applications.
+ all non-R3000 family processors. Note that you will need a suitable
+ Linux distribution to support this.
config PAGE_SIZE_64KB
bool "64kB"
Using 64kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
all non-R3000 family processor. Not that at the time of this
- writing this option is still high experimental; there are also
- issues with compatibility of user applications.
+ writing this option is still high experimental.
endchoice
extern void set_debug_traps(void);
extern irq_cpustat_t irq_stat [NR_CPUS];
+extern void mips_timer_interrupt(struct pt_regs *regs);
static void setup_local_irq(unsigned int irq, int type, int int_req);
static unsigned int startup_irq(unsigned int irq);
/*
*
* BRIEF MODULE DESCRIPTION
- * PROM library initialisation code, assuming a version of
- * pmon is the boot code.
+ * PROM library initialisation code, assuming YAMON is the boot loader.
*
- * Copyright 2000,2001 MontaVista Software Inc.
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
typedef struct
{
- char *name;
-/* char *val; */
-}t_env_var;
+ char *name;
+ char *val;
+} t_env_var;
char * prom_getcmdline(void)
{
/*
* Return a pointer to the given environment variable.
- * Environment variables are stored in the form of "memsize=64".
*/
t_env_var *env = (t_env_var *)prom_envp;
- int i;
-
- i = strlen(envname);
- while(env->name) {
- if(strncmp(envname, env->name, i) == 0) {
- return(env->name + strlen(envname) + 1);
- }
+ while (env->name) {
+ if (strcmp(envname, env->name) == 0)
+ return env->val;
env++;
}
- return(NULL);
+ return NULL;
}
inline unsigned char str2hexnum(unsigned char c)
mtc0 k0, CP0_PAGEMASK
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
+
+ /* We need to catch the ealry Alchemy SOCs with
+ * the write-only Config[OD] bit and set it back to one...
+ */
+ jal au1x00_fixup_config_od
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
null:
ack_r4ktimer(0);
+ irq_exit();
}
#ifdef CONFIG_PM
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
- * since became unsure of above "buad rate" algorithm (??).
+ * since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
text("/* Linux sigcontext offsets. */");
offset("#define SC_REGS ", struct sigcontext, sc_regs);
offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
- offset("#define SC_MDHI ", struct sigcontext, sc_hi);
- offset("#define SC_MDLO ", struct sigcontext, sc_lo);
+ offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
+ offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
offset("#define SC_PC ", struct sigcontext, sc_pc);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
linefeed;
"daddi %0, %1, %3\n\t"
".set pop"
: "=r" (v), "=&r" (tmp)
- : "I" (0xffffffffffffdb9a), "I" (0x1234));
+ : "I" (0xffffffffffffdb9aUL), "I" (0x1234));
set_except_vector(12, handler);
local_irq_restore(flags);
"dsrl %1, %1, 1\n\t"
"daddi %0, %1, %3"
: "=r" (v), "=&r" (tmp)
- : "I" (0xffffffffffffdb9a), "I" (0x1234));
+ : "I" (0xffffffffffffdb9aUL), "I" (0x1234));
set_except_vector(12, handler);
local_irq_restore(flags);
"daddu %1, %2\n\t"
".set pop"
: "=&r" (v), "=&r" (w), "=&r" (tmp)
- : "I" (0xffffffffffffdb9a), "I" (0x1234));
+ : "I" (0xffffffffffffdb9aUL), "I" (0x1234));
if (v == w) {
printk("no.\n");
"addiu %1, $0, %4\n\t"
"daddu %1, %2"
: "=&r" (v), "=&r" (w), "=&r" (tmp)
- : "I" (0xffffffffffffdb9a), "I" (0x1234));
+ : "I" (0xffffffffffffdb9aUL), "I" (0x1234));
if (v == w) {
printk("yes.\n");
case CPU_24K:
case CPU_25KF:
case CPU_34K:
+ case CPU_74K:
case CPU_PR4450:
cpu_wait = r4k_wait;
printk(" available.\n");
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
+ case PRID_IMP_R14000:
+ c->cputype = CPU_R14000;
+ c->isa_level = MIPS_CPU_ISA_IV;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+ MIPS_CPU_LLSC;
+ c->tlbsize = 64;
+ break;
}
}
case PRID_IMP_34K:
c->cputype = CPU_34K;
break;
+ case PRID_IMP_74K:
+ c->cputype = CPU_74K;
+ break;
}
}
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
/* FPU in pass1 is known to have issues. */
- if ((c->processor_id & 0xff) < 0x20)
+ if ((c->processor_id & 0xff) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
EMT
1:
mfc0 v1, CP0_TCSTATUS
- /* We set IXMT above, XOR should cler it here */
+ /* We set IXMT above, XOR should clear it here */
xori v1, v1, TCSTATUS_IXMT
or v1, v0, v1
mtc0 v1, CP0_TCSTATUS
*/
mfc0 k0, CP0_CAUSE
andi k0, k0, 0x7c
- add k1, k1, k0
- PTR_L k0, saved_vectors(k1)
- jr k0
+#ifdef CONFIG_64BIT
+ dsll k0, k0, 1
+#endif
+ PTR_L k1, saved_vectors(k0)
+ jr k1
nop
1:
move k0, sp
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
if (!sym->st_value) {
+ /* Ignore unresolved weak symbol */
+ if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+ continue;
printk(KERN_WARNING "%s: Unknown symbol %s\n",
me->name, strtab + sym->st_name);
return -ENOENT;
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
if (!sym->st_value) {
+ /* Ignore unresolved weak symbol */
+ if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+ continue;
printk(KERN_WARNING "%s: Unknown symbol %s\n",
me->name, strtab + sym->st_name);
return -ENOENT;
[CPU_R8000] = "R8000",
[CPU_R10000] = "R10000",
[CPU_R12000] = "R12000",
+ [CPU_R14000] = "R14000",
[CPU_R4300] = "R4300",
[CPU_R4650] = "R4650",
[CPU_R4700] = "R4700",
[CPU_24K] = "MIPS 24K",
[CPU_25KF] = "MIPS 25Kf",
[CPU_34K] = "MIPS 34K",
+ [CPU_74K] = "MIPS 74K",
[CPU_VR4111] = "NEC VR4111",
[CPU_VR4121] = "NEC VR4121",
[CPU_VR4122] = "NEC VR4122",
PTR sys_fork
PTR sys_read
PTR sys_write
- PTR sys_open /* 4005 */
+ PTR compat_sys_open /* 4005 */
PTR sys_close
PTR sys_waitpid
PTR sys_creat
#ifdef CONFIG_64BIT
/* HACK: Guess if the sign extension was forgotten */
if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
- start |= 0xffffffff00000000;
+ start |= 0xffffffff00000000UL;
#endif
end = start + size;
}
#endif
- memory_present(0, first_usable_pfn, max_low_pfn);
-
/* Initialize the boot-time allocator with low memory only. */
bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
/* Register lowmem ranges */
free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+ memory_present(0, curr_pfn, curr_pfn + size - 1);
}
/* Reserve the bootmap memory. */
#ifdef CONFIG_BLK_DEV_INITRD
initrd_below_start_ok = 1;
if (initrd_start) {
- unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
+ unsigned long initrd_size = ((unsigned char *)initrd_end) -
+ ((unsigned char *)initrd_start);
+ const int width = sizeof(long) * 2;
+
printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
(void *)initrd_start, initrd_size);
if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
printk("initrd extends beyond end of memory "
"(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
- sizeof(long) * 2,
- (unsigned long long)CPHYSADDR(initrd_end),
- sizeof(long) * 2,
- (unsigned long long)PFN_PHYS(max_low_pfn));
+ width,
+ (unsigned long long) CPHYSADDR(initrd_end),
+ width,
+ (unsigned long long) PFN_PHYS(max_low_pfn));
initrd_start = initrd_end = 0;
initrd_reserve_bootmem = 0;
}
save_gp_reg(31);
#undef save_gp_reg
-#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
err |= __put_user(mflo3(), &sc->sc_lo3);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
-#endif
-#ifdef CONFIG_64BIT
- err |= __put_user(regs->hi, &sc->sc_hi[0]);
- err |= __put_user(regs->lo, &sc->sc_lo[0]);
- if (cpu_has_dsp) {
- err |= __put_user(mfhi1(), &sc->sc_hi[1]);
- err |= __put_user(mflo1(), &sc->sc_lo[1]);
- err |= __put_user(mfhi2(), &sc->sc_hi[2]);
- err |= __put_user(mflo2(), &sc->sc_lo[2]);
- err |= __put_user(mfhi3(), &sc->sc_hi[3]);
- err |= __put_user(mflo3(), &sc->sc_lo[3]);
- err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
- }
-#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
-#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
-#endif
-#ifdef CONFIG_64BIT
- err |= __get_user(regs->hi, &sc->sc_hi[0]);
- err |= __get_user(regs->lo, &sc->sc_lo[0]);
- if (cpu_has_dsp) {
- err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
- err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
- err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
- err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
- err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
- err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
- err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
- }
-#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
current_thread_info()->cpu = 0;
smp_tune_scheduling();
plat_prepare_cpus(max_cpus);
+#ifndef CONFIG_HOTPLUG_CPU
+ cpu_present_map = cpu_possible_map;
+#endif
}
/* preload SMP state for boot cpu */
int cpu;
int ret;
- for_each_cpu(cpu) {
+ for_each_present_cpu(cpu) {
ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
if (ret)
printk(KERN_WARNING "topology_init: register_cpu %d "
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
{
- int tmp, len;
- char __user *name;
+ int tmp;
switch(cmd) {
- case SETNAME: {
- char nodename[__NEW_UTS_LEN + 1];
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- name = (char __user *) arg1;
-
- len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
- if (len < 0)
- return -EFAULT;
-
- down_write(&uts_sem);
- strncpy(system_utsname.nodename, nodename, len);
- nodename[__NEW_UTS_LEN] = '\0';
- strlcpy(system_utsname.nodename, nodename,
- sizeof(system_utsname.nodename));
- up_write(&uts_sem);
- return 0;
- }
-
case MIPS_ATOMIC_SET:
printk(KERN_CRIT "How did I get here?\n");
return -EINVAL;
case FLUSH_CACHE:
__flush_cache_all();
return 0;
-
- case MIPS_RDNVRAM:
- return -EIO;
}
return -EINVAL;
asmlinkage void do_mcheck(struct pt_regs *regs)
{
+ const int field = 2 * sizeof(unsigned long);
+ int multi_match = regs->cp0_status & ST0_TS;
+
show_regs(regs);
- dump_tlb_all();
+
+ if (multi_match) {
+ printk("Index : %0x\n", read_c0_index());
+ printk("Pagemask: %0x\n", read_c0_pagemask());
+ printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
+ printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+ printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+ printk("\n");
+ dump_tlb_all();
+ }
+
+ show_code((unsigned int *) regs->cp0_epc);
+
/*
* Some chips may have other causes of machine check (e.g. SB1
* graduation timer)
*/
panic("Caught Machine Check exception - %scaused by multiple "
"matching entries in the TLB.",
- (regs->cp0_status & ST0_TS) ? "" : "not ");
+ (multi_match) ? "" : "not ");
}
asmlinkage void do_mt(struct pt_regs *regs)
{
switch (current_cpu_data.cputype) {
case CPU_24K:
+ case CPU_34K:
case CPU_5KC:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* This is the MIPS specific mdebug section. */
.mdebug : { *(.mdebug) }
- /* These are needed for ELF backends which have not yet been
- converted to the new style linker. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- /* DWARF debug sections.
- Symbols in the .debug DWARF section are relative to the beginning of the
- section so we begin .debug at 0. It's not clear yet what needs to happen
- for the others. */
- .debug 0 : { *(.debug) }
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- .line 0 : { *(.line) }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
+
/* These must appear regardless of . */
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- .comment : { *(.comment) }
.note : { *(.note) }
}
ieee754dp ieee754dp_fint(int x)
{
- COMPXDP;
+ u64 xm;
+ int xe;
+ int xs;
CLEARCX;
ieee754dp ieee754dp_flong(s64 x)
{
- COMPXDP;
+ u64 xm;
+ int xe;
+ int xs;
CLEARCX;
ieee754sp ieee754sp_fint(int x)
{
- COMPXSP;
+ unsigned xm;
+ int xe;
+ int xs;
CLEARCX;
ieee754sp ieee754sp_flong(s64 x)
{
- COMPXDP; /* <--- need 64-bit mantissa temp */
+ u64 xm; /* <--- need 64-bit mantissa temp */
+ int xe;
+ int xs;
CLEARCX;
#include <asm/war.h>
#include <asm/cacheflush.h> /* for run_uncached() */
+
+/*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+ * o No return value
+ * o collapses to normal function call on UP kernels
+ * o collapses to normal function call on systems with a single shared
+ * primary cache.
+ */
+static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
+ int retry, int wait)
+{
+ preempt_disable();
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+ smp_call_function(func, info, retry, wait);
+#endif
+ func(info);
+ preempt_enable();
+}
+
/*
* Must die.
*/
if (!cpu_has_dc_aliases)
return;
- on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k___flush_cache_all(void * args)
case CPU_R4400MC:
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
r4k_blast_scache();
}
}
static void r4k___flush_cache_all(void)
{
- on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+ r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k_flush_cache_range(void * args)
static void r4k_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
}
static inline void local_r4k_flush_cache_mm(void * args)
if (!cpu_has_dc_aliases)
return;
- on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
}
struct flush_cache_page_args {
args.addr = addr;
args.pfn = pfn;
- on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
static inline void local_r4k_flush_data_cache_page(void * addr)
static void r4k_flush_data_cache_page(unsigned long addr)
{
- on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
}
struct flush_icache_range_args {
args.start = start;
args.end = end;
- on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
instruction_hazard();
}
args.vma = vma;
args.page = page;
- on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
}
static void r4k_flush_cache_sigtramp(unsigned long addr)
{
- on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
}
static void r4k_flush_icache_all(void)
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
c->icache.linesz = 64;
c->icache.ways = 2;
c->dcache.flags |= MIPS_CACHE_PINDEX;
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
case CPU_SB1:
break;
case CPU_24K:
+ case CPU_34K:
if (!(read_c0_config7() & (1 << 16)))
default:
if (c->dcache.waysize > PAGE_SIZE)
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
c->scache.linesz = 64 << ((config >> 13) & 1);
c->scache.ways = 2;
c->options |= MIPS_CPU_SUBSET_CACHES;
}
+void au1x00_fixup_config_od(void)
+{
+ /*
+ * c0_config.od (bit 19) was write only (and read as 0)
+ * on the early revisions of Alchemy SOCs. It disables the bus
+ * transaction overlapping and needs to be set to fix various errata.
+ */
+ switch (read_c0_prid()) {
+ case 0x00030100: /* Au1000 DA */
+ case 0x00030201: /* Au1000 HA */
+ case 0x00030202: /* Au1000 HB */
+ case 0x01030200: /* Au1500 AB */
+ /*
+ * Au1100 errata actually keeps silence about this bit, so we set it
+ * just in case for those revisions that require it to be set according
+ * to arch/mips/au1000/common/cputable.c
+ */
+ case 0x02030200: /* Au1100 AB */
+ case 0x02030201: /* Au1100 BA */
+ case 0x02030202: /* Au1100 BC */
+ set_c0_config(1 << 19);
+ break;
+ }
+}
+
static inline void coherency_setup(void)
{
change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
case CPU_R4400MC:
clear_c0_config(CONF_CU);
break;
+ /*
+ * We need to catch the ealry Alchemy SOCs with
+ * the write-only co_config.od bit and set it back to one...
+ */
+ case CPU_AU1000: /* rev. DA, HA, HB */
+ case CPU_AU1100: /* rev. AB, BA, BC ?? */
+ case CPU_AU1500: /* rev. AB */
+ au1x00_fixup_config_od();
+ break;
}
}
for (tmp = 0; tmp < max_low_pfn; tmp++)
if (page_is_ram(tmp)) {
ram++;
- if (PageReserved(mem_map+tmp))
+ if (PageReserved(pfn_to_page(tmp)))
reservedpages++;
}
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
pref_src_mode = Pref_LoadStreamed;
pref_dst_mode = Pref_StoreStreamed;
break;
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KEC:
case CPU_24K:
case CPU_34K:
+ case CPU_74K:
i_ehb(p);
tlbw(p);
break;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
#include "op_impl.h"
-extern struct op_mips_model op_model_mipsxx __attribute__((weak));
-extern struct op_mips_model op_model_rm9000 __attribute__((weak));
+extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
+extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
static struct op_mips_model *model;
case CPU_24K:
case CPU_25KF:
case CPU_34K:
+ case CPU_74K:
case CPU_SB1:
case CPU_SB1A:
- lmodel = &op_model_mipsxx;
+ lmodel = &op_model_mipsxx_ops;
break;
case CPU_RM9000:
- lmodel = &op_model_rm9000;
+ lmodel = &op_model_rm9000_ops;
break;
};
#define M_COUNTER_OVERFLOW (1UL << 31)
-struct op_mips_model op_model_mipsxx;
+struct op_mips_model op_model_mipsxx_ops;
static struct mipsxx_register_config {
unsigned int control[4];
static void mipsxx_reg_setup(struct op_counter_config *ctr)
{
- unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int counters = op_model_mipsxx_ops.num_counters;
int i;
/* Compute the performance counter control word. */
static void mipsxx_cpu_setup (void *args)
{
- unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int counters = op_model_mipsxx_ops.num_counters;
switch (counters) {
case 4:
/* Start all counters on current CPU */
static void mipsxx_cpu_start(void *args)
{
- unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int counters = op_model_mipsxx_ops.num_counters;
switch (counters) {
case 4:
/* Stop all counters on current CPU */
static void mipsxx_cpu_stop(void *args)
{
- unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int counters = op_model_mipsxx_ops.num_counters;
switch (counters) {
case 4:
static int mipsxx_perfcount_handler(struct pt_regs *regs)
{
- unsigned int counters = op_model_mipsxx.num_counters;
+ unsigned int counters = op_model_mipsxx_ops.num_counters;
unsigned int control;
unsigned int counter;
int handled = 0;
reset_counters(counters);
- op_model_mipsxx.num_counters = counters;
+ op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_data.cputype) {
case CPU_20KC:
- op_model_mipsxx.cpu_type = "mips/20K";
+ op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
case CPU_24K:
- op_model_mipsxx.cpu_type = "mips/24K";
+ op_model_mipsxx_ops.cpu_type = "mips/24K";
break;
case CPU_25KF:
- op_model_mipsxx.cpu_type = "mips/25K";
+ op_model_mipsxx_ops.cpu_type = "mips/25K";
break;
#ifndef CONFIG_SMP
case CPU_34K:
- op_model_mipsxx.cpu_type = "mips/34K";
+ op_model_mipsxx_ops.cpu_type = "mips/34K";
+ break;
+
+ case CPU_74K:
+ op_model_mipsxx_ops.cpu_type = "mips/74K";
break;
#endif
case CPU_5KC:
- op_model_mipsxx.cpu_type = "mips/5K";
+ op_model_mipsxx_ops.cpu_type = "mips/5K";
break;
case CPU_SB1:
case CPU_SB1A:
- op_model_mipsxx.cpu_type = "mips/sb1";
+ op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
default:
static void mipsxx_exit(void)
{
- reset_counters(op_model_mipsxx.num_counters);
+ reset_counters(op_model_mipsxx_ops.num_counters);
perf_irq = null_perf_irq;
}
-struct op_mips_model op_model_mipsxx = {
+struct op_mips_model op_model_mipsxx_ops = {
.reg_setup = mipsxx_reg_setup,
.cpu_setup = mipsxx_cpu_setup,
.init = mipsxx_init,
free_irq(rm9000_perfcount_irq, NULL);
}
-struct op_mips_model op_model_rm9000 = {
+struct op_mips_model op_model_rm9000_ops = {
.reg_setup = rm9000_reg_setup,
.cpu_setup = rm9000_cpu_setup,
.init = rm9000_init,
/* issue a PIO read to make sure no PIO writes are pending */
static void inline flush_crime_bus(void)
{
- volatile unsigned long junk = crime->control;
+ crime->control;
}
static void inline flush_mace_bus(void)
{
- volatile unsigned long junk = mace->perif.ctrl.misc;
+ mace->perif.ctrl.misc;
}
#undef DEBUG_IRQ
}
-
-static void __init fixup_device_tree(void)
+#ifdef CONFIG_PPC_MAPLE
+/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
+ * The values are bad, and it doesn't even have the right number of cells. */
+static void __init fixup_device_tree_maple(void)
{
+ phandle isa;
+ u32 isa_ranges[6];
+
+ isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+ if (!PHANDLE_VALID(isa))
+ return;
+
+ if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
+ == PROM_ERROR)
+ return;
+
+ if (isa_ranges[0] != 0x1 ||
+ isa_ranges[1] != 0xf4000000 ||
+ isa_ranges[2] != 0x00010000)
+ return;
+
+ prom_printf("fixing up bogus ISA range on Maple...\n");
+
+ isa_ranges[0] = 0x1;
+ isa_ranges[1] = 0x0;
+ isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+ isa_ranges[3] = 0x0;
+ isa_ranges[4] = 0x0;
+ isa_ranges[5] = 0x00010000;
+ prom_setprop(isa, "/ht@0/isa@4", "ranges",
+ isa_ranges, sizeof(isa_ranges));
+}
+#else
+#define fixup_device_tree_maple()
+#endif
+
#if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
+static void __init fixup_device_tree_pmac(void)
+{
phandle u3, i2c, mpic;
u32 u3_rev;
u32 interrupts[2];
parent = (u32)mpic;
prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
&parent, sizeof(parent));
-#endif
}
+#else
+#define fixup_device_tree_pmac()
+#endif
+static void __init fixup_device_tree(void)
+{
+ fixup_device_tree_maple();
+ fixup_device_tree_pmac();
+}
static void __init prom_find_boot_cpu(void)
{
/* some quirks for platform function decoding */
enum {
pmac_i2c_quirk_invmask = 0x00000001u,
+ pmac_i2c_quirk_skip = 0x00000002u,
};
static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
/* XXX Study device-tree's & apple drivers are get the quirks
* right !
*/
+ /* Workaround: It seems that running the clockspreading
+ * properties on the eMac will cause lockups during boot.
+ * The machine seems to work fine without that. So for now,
+ * let's make sure i2c-hwclock doesn't match about "imic"
+ * clocks and we'll figure out if we really need to do
+ * something special about those later.
+ */
+ { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+ { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
{ "i2c-cpu-voltage", NULL, 0},
{ "temp-monitor", NULL, 0 },
if (p->compatible &&
!device_is_compatible(np, p->compatible))
continue;
+ if (p->quirks & pmac_i2c_quirk_skip)
+ break;
callback(np, p->quirks);
break;
}
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/prom.h>
static LIST_HEAD(pmf_devices);
static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_MUTEX(pmf_irq_mutex);
static void pmf_release_device(struct kref *kref)
{
spin_lock_irqsave(&pmf_lock, flags);
func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN);
- if (func == NULL) {
- spin_unlock_irqrestore(&pmf_lock, flags);
+ if (func)
+ func = pmf_get_function(func);
+ spin_unlock_irqrestore(&pmf_lock, flags);
+ if (func == NULL)
return -ENODEV;
- }
+ mutex_lock(&pmf_irq_mutex);
if (list_empty(&func->irq_clients))
func->dev->handlers->irq_enable(func);
list_add(&client->link, &func->irq_clients);
client->func = func;
- spin_unlock_irqrestore(&pmf_lock, flags);
+ mutex_unlock(&pmf_irq_mutex);
return 0;
}
void pmf_unregister_irq_client(struct pmf_irq_client *client)
{
struct pmf_function *func = client->func;
- unsigned long flags;
BUG_ON(func == NULL);
- spin_lock_irqsave(&pmf_lock, flags);
+ mutex_lock(&pmf_irq_mutex);
client->func = NULL;
list_del(&client->link);
if (list_empty(&func->irq_clients))
func->dev->handlers->irq_disable(func);
- spin_unlock_irqrestore(&pmf_lock, flags);
+ mutex_unlock(&pmf_irq_mutex);
+ pmf_put_function(func);
}
EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
static const struct platform_notify_dev_map dev_map[] = {
{
.bus_id = "fsl-cpm-fcc",
- .rtn = mpc8272ads_fixup_enet_pdata
+ .rtn = mpc8272ads_fixup_enet_pdata,
},
{
.bus_id = "fsl-cpm-scc:uart",
- .rtn = mpc
+ .rtn = mpc8272ads_fixup_uart_pdata,
},
{
.bus_id = NULL
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
- pinfo = &mpc8272<F12>_uart_pdata[1];
+ pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
- pinfo = &mpc8272_uart_pdata[0];
+ pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
- ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
+ ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
return NULL;
}
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A00,
.end = 0x11A1F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8000,
.end = 0x80ff,
.flags = IORESOURCE_MEM,
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A20,
.end = 0x11A3F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8100,
.end = 0x81ff,
.flags = IORESOURCE_MEM,
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A40,
.end = 0x11A5F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8200,
.end = 0x82ff,
.flags = IORESOURCE_MEM,
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A60,
.end = 0x11A7F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8300,
.end = 0x83ff,
.flags = IORESOURCE_MEM,
.ppc_sys_name = "8272",
.mask = 0x0000ff00,
.value = 0x00000c00,
- .num_devices = 11,
+ .num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
- MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
- MPC82xx_CPM_USB, MPC82xx_SEC1,
+ MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
+ MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+ MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
},
},
/* below is a list of the 8280 family of processors */
#include <linux/config.h>
#include <linux/version.h>
#include <linux/errno.h>
+#include <linux/threads.h>
#include <asm/thread_info.h>
#include <asm/asi.h>
#include <asm/pstate.h>
call prom_init
mov %l7, %o0 ! OpenPROM cif handler
+ /* Initialize current_thread_info()->cpu as early as possible.
+ * In order to do that accurately we have to patch up the get_cpuid()
+ * assembler sequences. And that, in turn, requires that we know
+ * if we are on a Starfire box or not. While we're here, patch up
+ * the sun4v sequences as well.
+ */
+ call check_if_starfire
+ nop
+ call per_cpu_patch
+ nop
+ call sun4v_patch
+ nop
+
+#ifdef CONFIG_SMP
+ call hard_smp_processor_id
+ nop
+ cmp %o0, NR_CPUS
+ blu,pt %xcc, 1f
+ nop
+ call boot_cpu_id_too_large
+ nop
+ /* Not reached... */
+
+1:
+#else
+ mov 0, %o0
+#endif
+ stb %o0, [%g6 + TI_CPU]
+
/* Off we go.... */
call start_kernel
nop
static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };
-static void __init per_cpu_patch(void)
+void __init per_cpu_patch(void)
{
struct cpuid_patch_entry *p;
unsigned long ver;
}
}
-static void __init sun4v_patch(void)
+void __init sun4v_patch(void)
{
struct sun4v_1insn_patch_entry *p1;
struct sun4v_2insn_patch_entry *p2;
}
}
+#ifdef CONFIG_SMP
+void __init boot_cpu_id_too_large(int cpu)
+{
+ prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
+ cpu, NR_CPUS);
+ prom_halt();
+}
+#endif
+
void __init setup_arch(char **cmdline_p)
{
/* Initialize PROM console and command line. */
conswitchp = &prom_con;
#endif
- /* Work out if we are starfire early on */
- check_if_starfire();
-
- /* Now we know enough to patch the get_cpuid sequences
- * used by trap code.
- */
- per_cpu_patch();
-
- sun4v_patch();
-
boot_flags_init(*cmdline_p);
idprom_init();
boot_cpu_id = hard_smp_processor_id();
current_tick_offset = timer_tick_offset;
- cpu_set(boot_cpu_id, cpu_online_map);
prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
}
void __devinit smp_prepare_boot_cpu(void)
{
- int cpu = hard_smp_processor_id();
-
- if (cpu >= NR_CPUS) {
- prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
- prom_halt();
- }
-
- current_thread_info()->cpu = cpu;
- __local_per_cpu_offset = __per_cpu_offset(cpu);
-
- cpu_set(smp_processor_id(), cpu_online_map);
- cpu_set(smp_processor_id(), phys_cpu_present_map);
}
int __devinit __cpu_up(unsigned int cpu)
for (i = 0; i < NR_CPUS; i++, ptr += size)
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+ /* Setup %g5 for the boot cpu. */
+ __local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
}
sll %g1, 8, %g1
or %o5, %g1, %o4
-1: add %o2, %o4, %o2
+1: addcc %o2, %o4, %o2
+ addc %g0, %o2, %o2
csum_partial_finish:
retl
- mov %o2, %o0
+ srl %o2, 0, %o0
sll %g1, 8, %g1
or %o5, %g1, %o4
-1: add %o3, %o4, %o3
+1: addcc %o3, %o4, %o3
+ addc %g0, %o3, %o3
70:
retl
- mov %o3, %o0
+ srl %o3, 0, %o0
95: mov 0, GLOBAL_SPARE
brlez,pn %o2, 4f
# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
+# Prevent sprintf in nfsd from being converted to strcpy and resulting in
+# an unresolved reference.
+cflags-y += -ffreestanding
+
CFLAGS += $(cflags-y)
USER_CFLAGS += $(cflags-y)
extern void free_irq(unsigned int, void *);
extern int cpu(void);
+extern void time_init_kern(void);
+
/* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */
extern int __cant_sleep(void);
extern void segv_handler(int sig, union uml_pt_regs *regs);
extern void sigio_handler(int sig, union uml_pt_regs *regs);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
}
}
+
+void time_init_kern(void)
+{
+ unsigned long long nsecs;
+
+ nsecs = os_nsecs();
+ set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
+ -nsecs % BILLION);
+}
+
void do_boot_timer_handler(struct sigcontext * sc)
{
struct pt_regs regs;
initcall_t *call;
call = &__uml_initcall_start;
- while (call < &__uml_initcall_end){;
+ while (call < &__uml_initcall_end){
(*call)();
call++;
}
set_interval(ITIMER_REAL);
}
-extern void ktime_get_ts(struct timespec *ts);
-#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
-
void time_init(void)
{
- struct timespec now;
-
if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR)
panic("Couldn't set SIGVTALRM handler");
set_interval(ITIMER_VIRTUAL);
-
- do_posix_clock_monotonic_gettime(&now);
- wall_to_monotonic.tv_sec = -now.tv_sec;
- wall_to_monotonic.tv_nsec = -now.tv_nsec;
+ time_init_kern();
}
unsigned long long os_nsecs(void)
switch (call) {
case SEMOP:
- return sys_semtimedop(first, (struct sembuf *) ptr, second,
- NULL);
+ return sys_semtimedop(first, (struct sembuf __user *) ptr,
+ second, NULL);
case SEMTIMEDOP:
- return sys_semtimedop(first, (struct sembuf *) ptr, second,
- (const struct timespec *) fifth);
+ return sys_semtimedop(first, (struct sembuf __user *) ptr,
+ second,
+ (const struct timespec __user *) fifth);
case SEMGET:
return sys_semget (first, second, third);
case SEMCTL: {
#include "skas.h"
static int copy_sc_from_user_skas(struct pt_regs *regs,
- struct sigcontext *from)
+ struct sigcontext __user *from)
{
int err = 0;
return(err);
}
-int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
+int copy_sc_to_user_skas(struct sigcontext __user *to,
+ struct _fpstate __user *to_fp,
struct pt_regs *regs, unsigned long mask,
unsigned long sp)
{
#endif
#ifdef CONFIG_MODE_TT
-int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
+int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
int fpsize)
{
- struct _fpstate *to_fp, *from_fp;
+ struct _fpstate *to_fp;
+ struct _fpstate __user *from_fp;
unsigned long sigs;
int err;
return(err);
}
-int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
+int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp,
struct sigcontext *from, int fpsize, unsigned long sp)
{
- struct _fpstate *to_fp, *from_fp;
+ struct _fpstate __user *to_fp;
+ struct _fpstate *from_fp;
int err;
- to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
+ to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1));
from_fp = from->fpstate;
err = copy_to_user(to, from, sizeof(*to));
/* The SP in the sigcontext is the updated one for the signal
return(ret);
}
-static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
+static int copy_sc_to_user(struct sigcontext __user *to,
+ struct _fpstate __user *fp,
struct pt_regs *from, unsigned long mask,
unsigned long sp)
{
struct rt_sigframe
{
- char *pretcode;
+ char __user *pretcode;
struct ucontext uc;
struct siginfo info;
};
frame = (struct rt_sigframe __user *)
round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8;
- frame = (struct rt_sigframe *) ((unsigned long) frame - 128);
+ frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128);
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto out;
case ARCH_GET_GS:
ret = arch_prctl(code, (unsigned long) &tmp);
if(!ret)
- ret = put_user(tmp, &addr);
+ ret = put_user(tmp, (long __user *)addr);
break;
default:
ret = -EINVAL;
struct mm_struct *mm = current->mm;
int i, ret;
- stack_base = IA32_STACK_TOP - MAX_ARG_PAGES * PAGE_SIZE;
+ stack_base = stack_top - MAX_ARG_PAGES * PAGE_SIZE;
mm->arg_start = bprm->p + stack_base;
bprm->p += stack_base;
{
mpnt->vm_mm = mm;
mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p;
- mpnt->vm_end = IA32_STACK_TOP;
+ mpnt->vm_end = stack_top;
if (executable_stack == EXSTACK_ENABLE_X)
mpnt->vm_flags = VM_STACK_FLAGS | VM_EXEC;
else if (executable_stack == EXSTACK_DISABLE_X)
addr = start;
if (addr > ei->addr + ei->size)
continue;
- while (bad_addr(&addr, size) && addr+size < ei->addr + ei->size)
+ while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
;
last = addr + size;
if (last > ei->addr + ei->size)
ja 1f
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
-1: SAVE_REST
- movq %rsp,%rdi
- call syscall_trace_leave
- RESTORE_TOP_OF_STACK %rbx
- RESTORE_REST
+1: movq %rax,RAX-ARGOFFSET(%rsp)
/* Use IRET because user could have changed frame */
jmp int_ret_from_sys_call
CFI_ENDPROC
else
#endif
node = numa_node_id();
+
+ if (node < first_node(node_online_map))
+ node = first_node(node_online_map);
+
page = alloc_pages_node(node, gfp, order);
return page ? page_address(page) : NULL;
}
printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "
- "but IOMMU not compiled in.\n"
- KERN_ERR "WARNING 32bit PCI may malfunction.\n"
- KERN_ERR "You might want to enable "
- "CONFIG_GART_IOMMU\n");
+ "but IOMMU not available.\n"
+ KERN_ERR "WARNING 32bit PCI may malfunction.\n");
}
return -1;
}
offset_delay = delta % (USEC_PER_SEC / HZ);
rdtscll(tsc);
- vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+ vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000;
/* don't calculate delay for first run,
or if we've got less then a tick */
for now. */
node = apicid_to_node[hard_smp_processor_id()];
if (node == NUMA_NO_NODE)
- node = 0;
+ node = first_node(node_online_map);
numa_set_node(cpu, node);
if (acpi_numa > 0)
/* First clean up the node list */
for (i = 0; i < MAX_NUMNODES; i++) {
cutoff_node(i, start, end);
- if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+ if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
unparse_node(i);
+ node_set_offline(i);
+ }
}
if (acpi_numa <= 0)
#define CFQ_KEY_ASYNC (0)
-static DEFINE_RWLOCK(cfq_exit_lock);
+static DEFINE_SPINLOCK(cfq_exit_lock);
/*
* for the hash of cfqq inside the cfqd
mempool_t *crq_pool;
int rq_in_driver;
+ int hw_tag;
/*
* schedule slice state info
/*
* if queue was preempted, just add to front to be fair. busy_rr
- * isn't sorted.
+ * isn't sorted, but insert at the back for fairness.
*/
if (preempted || list == &cfqd->busy_rr) {
- list_add(&cfqq->cfq_list, list);
+ if (preempted)
+ list = list->prev;
+
+ list_add_tail(&cfqq->cfq_list, list);
return;
}
struct cfq_data *cfqd = q->elevator->elevator_data;
cfqd->rq_in_driver++;
+
+ /*
+ * If the depth is larger 1, it really could be queueing. But lets
+ * make the mark a little higher - idling could still be good for
+ * low queueing, and a low queueing number could also just indicate
+ * a SCSI mid layer like behaviour where limit+1 is often seen.
+ */
+ if (!cfqd->hw_tag && cfqd->rq_in_driver > 4)
+ cfqd->hw_tag = 1;
}
static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
cfqq = list_entry_cfqq(cfqd->cur_rr.next);
/*
+ * If no new queues are available, check if the busy list has some
+ * before falling back to idle io.
+ */
+ if (!cfqq && !list_empty(&cfqd->busy_rr))
+ cfqq = list_entry_cfqq(cfqd->busy_rr.next);
+
+ /*
* if we have idle queues and no rt or be queues had pending
* requests, either allow immediate service if the grace period
* has passed or arm the idle grace timer
/*
* put the reference this task is holding to the various queues
*/
- read_lock_irqsave(&cfq_exit_lock, flags);
+ spin_lock_irqsave(&cfq_exit_lock, flags);
n = rb_first(&ioc->cic_root);
while (n != NULL) {
n = rb_next(n);
}
- read_unlock_irqrestore(&cfq_exit_lock, flags);
+ spin_unlock_irqrestore(&cfq_exit_lock, flags);
}
static struct cfq_io_context *
struct cfq_io_context *cic;
struct rb_node *n;
- write_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
n = rb_first(&ioc->cic_root);
while (n != NULL) {
cic = rb_entry(n, struct cfq_io_context, rb_node);
-
+
changed_ioprio(cic);
n = rb_next(n);
}
- write_unlock(&cfq_exit_lock);
+ spin_unlock(&cfq_exit_lock);
return 0;
}
* set ->slice_left to allow preemption for a new process
*/
cfqq->slice_left = 2 * cfqd->cfq_slice_idle;
- cfq_mark_cfqq_idle_window(cfqq);
+ if (!cfqd->hw_tag)
+ cfq_mark_cfqq_idle_window(cfqq);
cfq_mark_cfqq_prio_changed(cfqq);
cfq_init_prio_data(cfqq);
}
static void
cfq_drop_dead_cic(struct io_context *ioc, struct cfq_io_context *cic)
{
- read_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
rb_erase(&cic->rb_node, &ioc->cic_root);
- read_unlock(&cfq_exit_lock);
+ list_del_init(&cic->queue_list);
+ spin_unlock(&cfq_exit_lock);
kmem_cache_free(cfq_ioc_pool, cic);
atomic_dec(&ioc_count);
}
BUG();
}
- read_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
rb_link_node(&cic->rb_node, parent, p);
rb_insert_color(&cic->rb_node, &ioc->cic_root);
list_add(&cic->queue_list, &cfqd->cic_list);
- read_unlock(&cfq_exit_lock);
+ spin_unlock(&cfq_exit_lock);
}
/*
{
int enable_idle = cfq_cfqq_idle_window(cfqq);
- if (!cic->ioc->task || !cfqd->cfq_slice_idle)
+ if (!cic->ioc->task || !cfqd->cfq_slice_idle || cfqd->hw_tag)
enable_idle = 0;
else if (sample_valid(cic->ttime_samples)) {
if (cic->ttime_mean > cfqd->cfq_slice_idle)
cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);
+ cic = crq->io_context;
+
/*
* we never wait for an async request and we don't allow preemption
* of an async request. so just return early
*/
- if (!cfq_crq_is_sync(crq))
+ if (!cfq_crq_is_sync(crq)) {
+ /*
+ * sync process issued an async request, if it's waiting
+ * then expire it and kick rq handling.
+ */
+ if (cic == cfqd->active_cic &&
+ del_timer(&cfqd->idle_slice_timer)) {
+ cfq_slice_expired(cfqd, 0);
+ cfq_start_queueing(cfqd, cfqq);
+ }
return;
-
- cic = crq->io_context;
+ }
cfq_update_io_thinktime(cfqd, cic);
cfq_update_io_seektime(cfqd, cic, crq);
* race with a non-idle queue, reset timer
*/
end = cfqd->last_end_request + CFQ_IDLE_GRACE;
- if (!time_after_eq(jiffies, end)) {
- cfqd->idle_class_timer.expires = end;
- add_timer(&cfqd->idle_class_timer);
- } else
+ if (!time_after_eq(jiffies, end))
+ mod_timer(&cfqd->idle_class_timer, end);
+ else
cfq_schedule_dispatch(cfqd);
spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
cfq_shutdown_timer_wq(cfqd);
- write_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
spin_lock_irq(q->queue_lock);
if (cfqd->active_queue)
}
spin_unlock_irq(q->queue_lock);
- write_unlock(&cfq_exit_lock);
+ spin_unlock(&cfq_exit_lock);
cfq_shutdown_timer_wq(cfqd);
*
*/
-#include <linux/vt_kern.h>
#include <linux/device.h>
#include <linux/kallsyms.h>
#include <linux/pm.h>
return error;
}
+
/**
* device_suspend - Save state and stop all devices in system.
* @state: Power state to put each device in.
{
int error = 0;
- if (!is_console_suspend_safe())
- return -EINVAL;
-
down(&dpm_sem);
down(&dpm_list_sem);
while (!list_empty(&dpm_active) && error == 0) {
config AGP_SIS
tristate "SiS chipset support"
- depends on AGP && X86_32
+ depends on AGP
help
This option gives you AGP support for the GLX component of
X on Silicon Integrated Systems [SiS] chipsets.
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
+ nforce3_agp_init(pdev);
+
return amd_8151_configure();
}
.chipset_name = "PT880",
},
+ /* PT880 Ultra */
+ {
+ .device_id = PCI_DEVICE_ID_VIA_PT880ULTRA,
+ .chipset_name = "PT880 Ultra",
+ },
+
/* PT890 */
{
.device_id = PCI_DEVICE_ID_VIA_8783_0,
ID(PCI_DEVICE_ID_VIA_8763_0),
ID(PCI_DEVICE_ID_VIA_8378_0),
ID(PCI_DEVICE_ID_VIA_PT880),
+ ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
ID(PCI_DEVICE_ID_VIA_8783_0),
ID(PCI_DEVICE_ID_VIA_PX8X0_0),
ID(PCI_DEVICE_ID_VIA_3269_0),
static void port_cleanup(struct smi_info *info)
{
unsigned int addr = info->io.addr_data;
- int mapsize;
+ int idx;
if (addr) {
- mapsize = ((info->io_size * info->io.regspacing)
- - (info->io.regspacing - info->io.regsize));
-
- release_region (addr, mapsize);
+ for (idx = 0; idx < info->io_size; idx++) {
+ release_region(addr + idx * info->io.regspacing,
+ info->io.regsize);
+ }
}
}
static int port_setup(struct smi_info *info)
{
unsigned int addr = info->io.addr_data;
- int mapsize;
+ int idx;
if (!addr)
return -ENODEV;
return -EINVAL;
}
- /* Calculate the total amount of memory to claim. This is an
- * unusual looking calculation, but it avoids claiming any
- * more memory than it has to. It will claim everything
- * between the first address to the end of the last full
- * register. */
- mapsize = ((info->io_size * info->io.regspacing)
- - (info->io.regspacing - info->io.regsize));
-
- if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
- return -EIO;
+ /* Some BIOSes reserve disjoint I/O regions in their ACPI
+ * tables. This causes problems when trying to register the
+ * entire I/O region. Therefore we must register each I/O
+ * port separately.
+ */
+ for (idx = 0; idx < info->io_size; idx++) {
+ if (request_region(addr + idx * info->io.regspacing,
+ info->io.regsize, DEVICE_NAME) == NULL) {
+ /* Undo allocations */
+ while (idx--) {
+ release_region(addr + idx * info->io.regspacing,
+ info->io.regsize);
+ }
+ return -EIO;
+ }
+ }
return 0;
}
#define ZERO_DEV(dev) \
memset(&dev->atr_csum,0, \
sizeof(struct cm4000_dev) - \
- /*link*/ sizeof(struct pcmcia_device) - \
+ /*link*/ sizeof(struct pcmcia_device *) - \
/*node*/ sizeof(dev_node_t) - \
/*atr*/ MAX_ATR*sizeof(char) - \
/*rbuf*/ 512*sizeof(char) - \
"Non-Host Info"
};
+struct tcpa_pc_event {
+ u32 event_id;
+ u32 event_size;
+ u8 event_data[0];
+};
+
enum tcpa_pc_event_ids {
SMBIOS = 1,
BIS_CERT,
NVRAM,
OPTION_ROM_EXEC,
OPTION_ROM_CONFIG,
- OPTION_ROM_MICROCODE,
+ OPTION_ROM_MICROCODE = 10,
S_CRTM_VERSION,
S_CRTM_CONTENTS,
POST_CONTENTS,
+ HOST_TABLE_OF_DEVICES,
};
static const char* tcpa_pc_event_id_strings[] = {
- ""
+ "",
"SMBIOS",
"BIS Certificate",
"POST BIOS ",
"NVRAM",
"Option ROM",
"Option ROM config",
- "Option ROM microcode",
+ "",
+ "Option ROM microcode ",
"S-CRTM Version",
- "S-CRTM Contents",
- "S-CRTM POST Contents",
- "POST Contents",
+ "S-CRTM Contents ",
+ "POST Contents ",
+ "Table of Devices",
};
/* returns pointer to start of pos. entry of tcg log */
const char *name = "";
char data[40] = "";
int i, n_len = 0, d_len = 0;
- u32 event_id;
+ struct tcpa_pc_event *pc_event;
switch(event->event_type) {
case PREBOOT:
}
break;
case EVENT_TAG:
- event_id = be32_to_cpu(*((u32 *)event_entry));
+ pc_event = (struct tcpa_pc_event *)event_entry;
/* ToDo Row data -> Base64 */
- switch (event_id) {
+ switch (pc_event->event_id) {
case SMBIOS:
case BIS_CERT:
case CMOS:
case NVRAM:
case OPTION_ROM_EXEC:
case OPTION_ROM_CONFIG:
- case OPTION_ROM_MICROCODE:
case S_CRTM_VERSION:
- case S_CRTM_CONTENTS:
- case POST_CONTENTS:
- name = tcpa_pc_event_id_strings[event_id];
+ name = tcpa_pc_event_id_strings[pc_event->event_id];
n_len = strlen(name);
break;
+ /* hash data */
case POST_BIOS_ROM:
case ESCD:
- name = tcpa_pc_event_id_strings[event_id];
+ case OPTION_ROM_MICROCODE:
+ case S_CRTM_CONTENTS:
+ case POST_CONTENTS:
+ name = tcpa_pc_event_id_strings[pc_event->event_id];
n_len = strlen(name);
for (i = 0; i < 20; i++)
- d_len += sprintf(data, "%02x",
- event_entry[8 + i]);
+ d_len += sprintf(&data[2*i], "%02x",
+ pc_event->event_data[i]);
break;
default:
break;
static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
{
+ struct tcpa_event *event = v;
+ char *data = v;
+ int i;
- char *eventname;
- char data[4];
- u32 help;
- int i, len;
- struct tcpa_event *event = (struct tcpa_event *) v;
- unsigned char *event_entry =
- (unsigned char *) (v + sizeof(struct tcpa_event));
-
- eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
- if (!eventname) {
- printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
- __func__);
- return -ENOMEM;
- }
-
- /* 1st: PCR used is in little-endian format (4 bytes) */
- help = le32_to_cpu(event->pcr_index);
- memcpy(data, &help, 4);
- for (i = 0; i < 4; i++)
- seq_putc(m, data[i]);
-
- /* 2nd: SHA1 (20 bytes) */
- for (i = 0; i < 20; i++)
- seq_putc(m, event->pcr_value[i]);
-
- /* 3rd: event type identifier (4 bytes) */
- help = le32_to_cpu(event->event_type);
- memcpy(data, &help, 4);
- for (i = 0; i < 4; i++)
+ for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
seq_putc(m, data[i]);
- len = 0;
-
- len += get_event_name(eventname, event, event_entry);
-
- /* 4th: filename <= 255 + \'0' delimiter */
- if (len > TCG_EVENT_NAME_LEN_MAX)
- len = TCG_EVENT_NAME_LEN_MAX;
-
- for (i = 0; i < len; i++)
- seq_putc(m, eventname[i]);
-
- /* 5th: delimiter */
- seq_putc(m, '\0');
-
- kfree(eventname);
return 0;
}
}
}
-int is_console_suspend_safe(void)
-{
- /* It is unsafe to suspend devices while X has control of the
- * hardware. Make sure we are running on a kernel-controlled console.
- */
- return vc_cons[fg_console].d->vc_mode == KD_TEXT;
-}
-
/*
* Visible symbols for modules
*/
static u8
sgiioc4_INB(unsigned long port)
{
- u8 reg = (u8) inb(port);
+ u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
if (reg & 0x51) { /* Not busy...check for interrupt */
unsigned long other_ir = port - 0x110;
- unsigned int intr_reg = (u32) inl(other_ir);
+ unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
- outl(0x03, other_ir);
- intr_reg = (u32) inl(other_ir);
+ writel(0x03, (void __iomem *) other_ir);
+ intr_reg = (u32) readl((void __iomem *) other_ir);
}
}
}
hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
+
+ /*
+ * The IOC4 uses MMIO rather than Port IO.
+ * It also needs special workarounds for INB.
+ */
+ default_hwif_mmiops(hwif);
hwif->INB = &sgiioc4_INB;
}
module_init(ioc4_ide_init);
module_exit(ioc4_ide_exit);
-MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
0x010000000000ULL, CSR1212_ALL_SPACE_END);
- if (!scsi_id->status_fifo_addr) {
+ if (scsi_id->status_fifo_addr == ~0ULL) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}
spin_lock_irqsave(&priv->tx_lock, flags);
++priv->tx_tail;
if (netif_queue_stopped(dev) &&
+ test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) &&
priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1)
netif_wake_queue(dev);
spin_unlock_irqrestore(&priv->tx_lock, flags);
struct sw *sw;
struct input_dev *input_dev;
int i, j, k, l;
- int err;
+ int err = 0;
unsigned char *buf = NULL; /* [SW_LENGTH] */
unsigned char *idbuf = NULL; /* [SW_LENGTH] */
unsigned char m = 1;
goto fail4;
}
- return 0;
+ out: kfree(buf);
+ kfree(idbuf);
+
+ return err;
fail4: input_free_device(sw->dev[i]);
fail3: while (--i >= 0)
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
kfree(sw);
- kfree(buf);
- kfree(idbuf);
- return err;
+ goto out;
}
static void sw_disconnect(struct gameport *gameport)
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&corgikbd_data->lock, flags);
- input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
- input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
- input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
+ input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+ input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+ input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
input_sync(corgikbd_data->input);
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
set_bit(corgikbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
- set_bit(SW_0, input_dev->swbit);
- set_bit(SW_1, input_dev->swbit);
- set_bit(SW_2, input_dev->swbit);
+ set_bit(SW_LID, input_dev->swbit);
+ set_bit(SW_TABLET_MODE, input_dev->swbit);
+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
input_register_device(corgikbd->input);
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
- input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
set_bit(spitzkbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
- set_bit(SW_0, input_dev->swbit);
- set_bit(SW_1, input_dev->swbit);
- set_bit(SW_2, input_dev->swbit);
+ set_bit(SW_LID, input_dev->swbit);
+ set_bit(SW_TABLET_MODE, input_dev->swbit);
+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
input_register_device(input_dev);
{ KE_END, 0 }
};
+static struct key_entry keymap_aopen_1559as[] = {
+ { KE_KEY, 0x01, KEY_HELP },
+ { KE_KEY, 0x06, KEY_PROG3 },
+ { KE_KEY, 0x11, KEY_PROG1 },
+ { KE_KEY, 0x12, KEY_PROG2 },
+ { KE_WIFI, 0x30, 0 },
+ { KE_KEY, 0x31, KEY_MAIL },
+ { KE_KEY, 0x36, KEY_WWW },
+};
+
/*
* If your machine is not here (which is currently rather likely), please send
* a list of buttons and their key codes (reported when loading this module
},
.driver_data = keymap_acer_travelmate_240
},
+ {
+ .callback = dmi_matched,
+ .ident = "AOpen 1559AS",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
+ DMI_MATCH(DMI_BOARD_NAME, "E2U"),
+ },
+ .driver_data = keymap_aopen_1559as
+ },
{ NULL, }
};
}
if (priv->i->flags & ALPS_OLDPROTO) {
- left = packet[2] & 0x08;
- right = packet[2] & 0x10;
+ left = packet[2] & 0x10;
+ right = packet[2] & 0x08;
middle = 0;
x = packet[1] | ((packet[0] & 0x07) << 7);
y = packet[4] | ((packet[3] & 0x07) << 7);
static struct dmi_system_id lifebook_dmi_table[] = {
{
+ .ident = "LifeBook B",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+ },
+ },
+ {
.ident = "Lifebook B",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
{
+ .ident = "Lifebook B213x/B2150",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+ },
+ },
+ {
+ .ident = "Zephyr",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+ },
+ },
+ {
+ .ident = "CF-18",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+ },
+ },
+ {
.ident = "Lifebook B142",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
#define PS2PP_KIND_WHEEL 1
#define PS2PP_KIND_MX 2
#define PS2PP_KIND_TP3 3
+#define PS2PP_KIND_TRACKMAN 4
/* Logitech mouse features */
#define PS2PP_WHEEL 0x01
{ 73, 0, PS2PP_SIDE_BTN },
{ 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
+ { 79, PS2PP_KIND_TRACKMAN, PS2PP_WHEEL }, /* TrackMan with wheel */
{ 80, PS2PP_KIND_WHEEL, PS2PP_SIDE_BTN | PS2PP_WHEEL },
{ 81, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 83, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
psmouse->name = "TouchPad 3";
break;
+ case PS2PP_KIND_TRACKMAN:
+ psmouse->name = "TrackMan";
+ break;
+
default:
/*
* Set name to "Mouse" only when using PS2++,
}
EXPORT_SYMBOL_GPL(md_new_event);
+/* Alternate version that can be called from interrupts
+ * when calling sysfs_notify isn't needed.
+ */
+void md_new_event_inintr(mddev_t *mddev)
+{
+ atomic_inc(&md_event_count);
+ wake_up(&md_event_waiters);
+}
+
/*
* Enables to iterate over all existing md arrays
* all_mddevs_lock protects this list.
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
- md_new_event(mddev);
+ md_new_event_inintr(mddev);
}
/* seq_file implementation /proc/mdstat */
}
#endif
+static int
+mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
+{
+ if ((MptDriverClass[index] == MPTSPI_DRIVER &&
+ ioc->bus_type != SPI) ||
+ (MptDriverClass[index] == MPTFC_DRIVER &&
+ ioc->bus_type != FC) ||
+ (MptDriverClass[index] == MPTSAS_DRIVER &&
+ ioc->bus_type != SAS))
+ /* make sure we only call the relevant reset handler
+ * for the bus */
+ return 0;
+ return (MptResetHandlers[index])(ioc, reset_phase);
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_do_ioc_recovery - Initialize or recover MPT adapter.
if ((ret == 0) && MptResetHandlers[ii]) {
dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
ioc->name, ii));
- rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
+ rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET);
handlers++;
}
if (alt_ioc_ready && MptResetHandlers[ii]) {
drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
- rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
+ rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET);
handlers++;
}
}
if (MptResetHandlers[ii]) {
dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
ioc->name, ii));
- r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
+ r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET);
if (ioc->alt_ioc) {
dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
- r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
+ r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET);
}
}
}
if (MptResetHandlers[ii]) {
dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
ioc->name, ii));
- r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
+ r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET);
if (ioc->alt_ioc) {
dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
- r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
+ r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
}
}
}
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
- depends on SOC_AU1X00 && MMC
+ depends on MMC && SOC_AU1200
help
This selects the AMD Alchemy(R) Multimedia card interface.
If you have a Alchemy platform with a MMC slot, say Y or M here.
*data = 0;
/* Hook up test interrupt handler just for this test */
- if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
- shared_int = FALSE;
- } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
+ if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name,
+ netdev)) {
+ shared_int = FALSE;
+ } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
netdev->name, netdev)){
*data = 1;
return -1;
}
+ DPRINTK(PROBE,INFO, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
/* Disable all the interrupts */
E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
buffer_info = &rx_ring->buffer_info[i];
while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb, *next_skb;
+ struct sk_buff *skb;
u8 status;
#ifdef CONFIG_E1000_NAPI
if (*work_done >= work_to_do)
prefetch(next_rxd);
next_buffer = &rx_ring->buffer_info[i];
- next_skb = next_buffer->skb;
- prefetch(next_skb->data - NET_IP_ALIGN);
cleaned = TRUE;
cleaned_count++;
struct e1000_buffer *buffer_info, *next_buffer;
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
- struct sk_buff *skb, *next_skb;
+ struct sk_buff *skb;
unsigned int i, j;
uint32_t length, staterr;
int cleaned_count = 0;
prefetch(next_rxd);
next_buffer = &rx_ring->buffer_info[i];
- next_skb = next_buffer->skb;
- prefetch(next_skb->data - NET_IP_ALIGN);
cleaned = TRUE;
cleaned_count++;
return ret;
}
+#ifdef NETIF_F_TSO
+static int nv_set_tso(struct net_device *dev, u32 value)
+{
+ struct fe_priv *np = netdev_priv(dev);
+
+ if ((np->driver_data & DEV_HAS_CHECKSUM))
+ return ethtool_op_set_tso(dev, value);
+ else
+ return value ? -EOPNOTSUPP : 0;
+}
+#endif
+
static struct ethtool_ops ops = {
.get_drvinfo = nv_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_regs = nv_get_regs,
.nway_reset = nv_nway_reset,
.get_perm_addr = ethtool_op_get_perm_addr,
+#ifdef NETIF_F_TSO
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = nv_set_tso
+#endif
};
static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
#include <linux/string.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <net/checksum.h>
#include <asm/byteorder.h>
#include <asm/io.h>
-#include <asm/pci.h>
#include <asm/processor.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "0.9.0"
+#define MYRI10GE_VERSION_STR "1.0.0"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
goto abort_with_fw;
crc = crc32(~0, fw->data, fw->size);
- memcpy_toio(mgp->sram + MYRI10GE_FW_OFFSET, fw->data, fw->size);
+ if (mgp->tx.boundary == 2048) {
+ /* Avoid PCI burst on chipset with unaligned completions. */
+ int i;
+ __iomem u32 *ptr = (__iomem u32 *) (mgp->sram +
+ MYRI10GE_FW_OFFSET);
+ for (i = 0; i < fw->size / 4; i++) {
+ __raw_writel(((u32 *) fw->data)[i], ptr + i);
+ wmb();
+ }
+ } else {
+ myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET, fw->data,
+ fw->size);
+ }
/* corruption checking is good for parity recovery and buggy chipset */
memcpy_fromio(fw->data, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
reread_crc = crc32(~0, fw->data, fw->size);
u32 dma_low, dma_high, size;
int status, i;
+ size = 0;
status = myri10ge_load_hotplug_firmware(mgp, &size);
if (status) {
dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
}
/*
- * Set of routunes to get a new receive buffer. Any buffer which
+ * Set of routines to get a new receive buffer. Any buffer which
* crosses a 4KB boundary must start on a 4KB boundary due to PCIe
* wdma restrictions. We also try to align any smaller allocation to
* at least a 16 byte boundary for efficiency. We assume the linux
.get_rx_csum = myri10ge_get_rx_csum,
.set_rx_csum = myri10ge_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
#ifdef NETIF_F_TSO
dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
goto abort_with_netdev;
}
- mgp->cmd = pci_alloc_consistent(pdev, sizeof(*mgp->cmd), &mgp->cmd_bus);
+ mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
+ &mgp->cmd_bus, GFP_KERNEL);
if (mgp->cmd == NULL)
goto abort_with_netdev;
- mgp->fw_stats = pci_alloc_consistent(pdev, sizeof(*mgp->fw_stats),
- &mgp->fw_stats_bus);
+ mgp->fw_stats = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
+ &mgp->fw_stats_bus, GFP_KERNEL);
if (mgp->fw_stats == NULL)
goto abort_with_cmd;
/* allocate rx done ring */
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
- mgp->rx_done.entry =
- pci_alloc_consistent(pdev, bytes, &mgp->rx_done.bus);
+ mgp->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
+ &mgp->rx_done.bus, GFP_KERNEL);
if (mgp->rx_done.entry == NULL)
goto abort_with_ioremap;
memset(mgp->rx_done.entry, 0, bytes);
abort_with_rx_done:
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
- pci_free_consistent(pdev, bytes, mgp->rx_done.entry, mgp->rx_done.bus);
+ dma_free_coherent(&pdev->dev, bytes,
+ mgp->rx_done.entry, mgp->rx_done.bus);
abort_with_ioremap:
iounmap(mgp->sram);
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
- pci_free_consistent(pdev, sizeof(*mgp->fw_stats),
- mgp->fw_stats, mgp->fw_stats_bus);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
+ mgp->fw_stats, mgp->fw_stats_bus);
abort_with_cmd:
- pci_free_consistent(pdev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
+ mgp->cmd, mgp->cmd_bus);
abort_with_netdev:
myri10ge_dummy_rdma(mgp, 0);
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
- pci_free_consistent(pdev, bytes, mgp->rx_done.entry, mgp->rx_done.bus);
+ dma_free_coherent(&pdev->dev, bytes,
+ mgp->rx_done.entry, mgp->rx_done.bus);
iounmap(mgp->sram);
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
- pci_free_consistent(pdev, sizeof(*mgp->fw_stats),
- mgp->fw_stats, mgp->fw_stats_bus);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
+ mgp->fw_stats, mgp->fw_stats_bus);
- pci_free_consistent(pdev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
+ mgp->cmd, mgp->cmd_bus);
free_netdev(netdev);
pci_set_drvdata(pdev, NULL);
}
-#define PCI_DEVICE_ID_MYIRCOM_MYRI10GE_Z8E 0x0008
+#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
static struct pci_device_id myri10ge_pci_tbl[] = {
- {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYIRCOM_MYRI10GE_Z8E)},
+ {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
{0},
};
if(!configured) {
printk("netconsole: not configured, aborting\n");
- return -EINVAL;
+ return 0;
}
if(netpoll_setup(&np))
dev->last_rx = jiffies;
lp->linux_stats.rx_packets++;
- lp->linux_stats.rx_bytes += skb->len;
+ lp->linux_stats.rx_bytes += pkt_len;
outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
continue;
} else {
* give dev_queue_xmit something it can free.
*/
skb2 = skb_clone(skb, GFP_ATOMIC);
+
+ if (skb2 == NULL)
+ goto abort;
}
ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr));
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "1.5"
+#define DRV_VERSION "1.6"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
#define DEFAULT_RX_RING_SIZE 512
#define MAX_TX_RING_SIZE 1024
+#define TX_LOW_WATER (MAX_SKB_FRAGS + 1)
#define MAX_RX_RING_SIZE 4096
#define RX_COPY_THRESHOLD 128
#define RX_BUF_SIZE 1536
int err;
if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
- p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
+ p->tx_pending < TX_LOW_WATER || p->tx_pending > MAX_TX_RING_SIZE)
return -EINVAL;
skge->rx_ring.count = p->rx_pending;
struct skge_hw *hw = skge->hw;
int port = skge->port;
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
if (hw->chip_id == CHIP_ID_GENESIS) {
switch (mode) {
case LED_MODE_OFF:
PHY_M_LED_MO_RX(MO_LED_ON));
}
}
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
}
/* blink LED's for finding board */
netif_stop_queue(skge->netdev);
netif_carrier_off(skge->netdev);
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
if (hw->chip_id == CHIP_ID_GENESIS) {
genesis_reset(hw, port);
genesis_mac_init(hw, port);
yukon_reset(hw, port);
yukon_init(hw, port);
}
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
}
/* Basic MII support */
/* fallthru */
case SIOCGMIIREG: {
u16 val = 0;
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
if (hw->chip_id == CHIP_ID_GENESIS)
err = __xm_phy_read(hw, skge->port, data->reg_num & 0x1f, &val);
else
err = __gm_phy_read(hw, skge->port, data->reg_num & 0x1f, &val);
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
data->val_out = val;
break;
}
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
if (hw->chip_id == CHIP_ID_GENESIS)
err = xm_phy_write(hw, skge->port, data->reg_num & 0x1f,
data->val_in);
else
err = gm_phy_write(hw, skge->port, data->reg_num & 0x1f,
data->val_in);
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
break;
}
return err;
goto free_rx_ring;
/* Initialize MAC */
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_mac_init(hw, port);
else
yukon_mac_init(hw, port);
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
/* Configure RAMbuffers */
chunk = hw->ram_size / ((hw->ports + 1)*2);
{
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- struct skge_ring *ring = &skge->tx_ring;
struct skge_element *e;
struct skge_tx_desc *td;
int i;
u32 control, len;
u64 map;
+ unsigned long flags;
skb = skb_padto(skb, ETH_ZLEN);
if (!skb)
return NETDEV_TX_OK;
- if (!spin_trylock(&skge->tx_lock)) {
+ if (!spin_trylock_irqsave(&skge->tx_lock, flags))
/* Collision - tell upper layer to requeue */
return NETDEV_TX_LOCKED;
- }
if (unlikely(skge_avail(&skge->tx_ring) < skb_shinfo(skb)->nr_frags + 1)) {
if (!netif_queue_stopped(dev)) {
printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
dev->name);
}
- spin_unlock(&skge->tx_lock);
+ spin_unlock_irqrestore(&skge->tx_lock, flags);
return NETDEV_TX_BUSY;
}
- e = ring->to_use;
+ e = skge->tx_ring.to_use;
td = e->desc;
+ BUG_ON(td->control & BMU_OWN);
e->skb = skb;
len = skb_headlen(skb);
map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
frag->size, PCI_DMA_TODEVICE);
e = e->next;
- e->skb = NULL;
+ e->skb = skb;
tf = e->desc;
+ BUG_ON(tf->control & BMU_OWN);
+
tf->dma_lo = map;
tf->dma_hi = (u64) map >> 32;
pci_unmap_addr_set(e, mapaddr, map);
skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_START);
- if (netif_msg_tx_queued(skge))
+ if (unlikely(netif_msg_tx_queued(skge)))
printk(KERN_DEBUG "%s: tx queued, slot %td, len %d\n",
- dev->name, e - ring->start, skb->len);
+ dev->name, e - skge->tx_ring.start, skb->len);
- ring->to_use = e->next;
- if (skge_avail(&skge->tx_ring) <= MAX_SKB_FRAGS + 1) {
+ skge->tx_ring.to_use = e->next;
+ if (skge_avail(&skge->tx_ring) <= TX_LOW_WATER) {
pr_debug("%s: transmit queue full\n", dev->name);
netif_stop_queue(dev);
}
- mmiowb();
- spin_unlock(&skge->tx_lock);
+ spin_unlock_irqrestore(&skge->tx_lock, flags);
dev->trans_start = jiffies;
return NETDEV_TX_OK;
}
-static void skge_tx_complete(struct skge_port *skge, struct skge_element *last)
+
+/* Free resources associated with this reing element */
+static void skge_tx_free(struct skge_port *skge, struct skge_element *e,
+ u32 control)
{
struct pci_dev *pdev = skge->hw->pdev;
- struct skge_element *e;
- for (e = skge->tx_ring.to_clean; e != last; e = e->next) {
- struct sk_buff *skb = e->skb;
- int i;
+ BUG_ON(!e->skb);
- e->skb = NULL;
+ /* skb header vs. fragment */
+ if (control & BMU_STF)
pci_unmap_single(pdev, pci_unmap_addr(e, mapaddr),
- skb_headlen(skb), PCI_DMA_TODEVICE);
+ pci_unmap_len(e, maplen),
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_page(pdev, pci_unmap_addr(e, mapaddr),
+ pci_unmap_len(e, maplen),
+ PCI_DMA_TODEVICE);
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- e = e->next;
- pci_unmap_page(pdev, pci_unmap_addr(e, mapaddr),
- skb_shinfo(skb)->frags[i].size,
- PCI_DMA_TODEVICE);
- }
+ if (control & BMU_EOF) {
+ if (unlikely(netif_msg_tx_done(skge)))
+ printk(KERN_DEBUG PFX "%s: tx done slot %td\n",
+ skge->netdev->name, e - skge->tx_ring.start);
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(e->skb);
}
- skge->tx_ring.to_clean = e;
+ e->skb = NULL;
}
+/* Free all buffers in transmit ring */
static void skge_tx_clean(struct skge_port *skge)
{
+ struct skge_element *e;
+ unsigned long flags;
+
+ spin_lock_irqsave(&skge->tx_lock, flags);
+ for (e = skge->tx_ring.to_clean; e != skge->tx_ring.to_use; e = e->next) {
+ struct skge_tx_desc *td = e->desc;
+ skge_tx_free(skge, e, td->control);
+ td->control = 0;
+ }
- spin_lock_bh(&skge->tx_lock);
- skge_tx_complete(skge, skge->tx_ring.to_use);
+ skge->tx_ring.to_clean = e;
netif_wake_queue(skge->netdev);
- spin_unlock_bh(&skge->tx_lock);
+ spin_unlock_irqrestore(&skge->tx_lock, flags);
}
static void skge_tx_timeout(struct net_device *dev)
return NULL;
}
-static void skge_tx_done(struct skge_port *skge)
+/* Free all buffers in Tx ring which are no longer owned by device */
+static void skge_txirq(struct net_device *dev)
{
+ struct skge_port *skge = netdev_priv(dev);
struct skge_ring *ring = &skge->tx_ring;
- struct skge_element *e, *last;
+ struct skge_element *e;
+
+ rmb();
spin_lock(&skge->tx_lock);
- last = ring->to_clean;
for (e = ring->to_clean; e != ring->to_use; e = e->next) {
struct skge_tx_desc *td = e->desc;
if (td->control & BMU_OWN)
break;
- if (td->control & BMU_EOF) {
- last = e->next;
- if (unlikely(netif_msg_tx_done(skge)))
- printk(KERN_DEBUG PFX "%s: tx done slot %td\n",
- skge->netdev->name, e - ring->start);
- }
+ skge_tx_free(skge, e, td->control);
}
+ skge->tx_ring.to_clean = e;
- skge_tx_complete(skge, last);
-
- skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_IRQ_CL_F);
-
- if (skge_avail(&skge->tx_ring) > MAX_SKB_FRAGS + 1)
+ if (netif_queue_stopped(skge->netdev)
+ && skge_avail(&skge->tx_ring) > TX_LOW_WATER)
netif_wake_queue(skge->netdev);
spin_unlock(&skge->tx_lock);
int to_do = min(dev->quota, *budget);
int work_done = 0;
- skge_tx_done(skge);
-
for (e = ring->to_clean; prefetch(e->next), work_done < to_do; e = e->next) {
struct skge_rx_desc *rd = e->desc;
struct sk_buff *skb;
return 1; /* not done */
netif_rx_complete(dev);
- mmiowb();
- hw->intr_mask |= skge->port == 0 ? (IS_R1_F|IS_XA1_F) : (IS_R2_F|IS_XA2_F);
+ spin_lock_irq(&hw->hw_lock);
+ hw->intr_mask |= rxirqmask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ mmiowb();
+ spin_unlock_irq(&hw->hw_lock);
return 0;
}
}
/*
- * Interrupt from PHY are handled in tasklet (soft irq)
+ * Interrupt from PHY are handled in work queue
* because accessing phy registers requires spin wait which might
* cause excess interrupt latency.
*/
-static void skge_extirq(unsigned long data)
+static void skge_extirq(void *arg)
{
- struct skge_hw *hw = (struct skge_hw *) data;
+ struct skge_hw *hw = arg;
int port;
- spin_lock(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
for (port = 0; port < hw->ports; port++) {
struct net_device *dev = hw->dev[port];
struct skge_port *skge = netdev_priv(dev);
bcom_phy_intr(skge);
}
}
- spin_unlock(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
+ spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
}
static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
if (status == 0)
return IRQ_NONE;
+ spin_lock(&hw->hw_lock);
+ status &= hw->intr_mask;
if (status & IS_EXT_REG) {
hw->intr_mask &= ~IS_EXT_REG;
- tasklet_schedule(&hw->ext_tasklet);
+ schedule_work(&hw->phy_work);
}
- if (status & (IS_R1_F|IS_XA1_F)) {
- skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
- hw->intr_mask &= ~(IS_R1_F|IS_XA1_F);
- netif_rx_schedule(hw->dev[0]);
+ if (status & IS_XA1_F) {
+ skge_write8(hw, Q_ADDR(Q_XA1, Q_CSR), CSR_IRQ_CL_F);
+ skge_txirq(hw->dev[0]);
}
- if (status & (IS_R2_F|IS_XA2_F)) {
- skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
- hw->intr_mask &= ~(IS_R2_F|IS_XA2_F);
- netif_rx_schedule(hw->dev[1]);
+ if (status & IS_R1_F) {
+ skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
+ hw->intr_mask &= ~IS_R1_F;
+ netif_rx_schedule(hw->dev[0]);
}
- if (likely((status & hw->intr_mask) == 0))
- return IRQ_HANDLED;
+ if (status & IS_PA_TO_TX1)
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX1);
if (status & IS_PA_TO_RX1) {
struct skge_port *skge = netdev_priv(hw->dev[0]);
- ++skge->net_stats.rx_over_errors;
- skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX1);
- }
- if (status & IS_PA_TO_RX2) {
- struct skge_port *skge = netdev_priv(hw->dev[1]);
++skge->net_stats.rx_over_errors;
- skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX2);
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX1);
}
- if (status & IS_PA_TO_TX1)
- skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX1);
-
- if (status & IS_PA_TO_TX2)
- skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX2);
if (status & IS_MAC1)
skge_mac_intr(hw, 0);
- if (status & IS_MAC2)
- skge_mac_intr(hw, 1);
+ if (hw->dev[1]) {
+ if (status & IS_XA2_F) {
+ skge_write8(hw, Q_ADDR(Q_XA2, Q_CSR), CSR_IRQ_CL_F);
+ skge_txirq(hw->dev[1]);
+ }
+
+ if (status & IS_R2_F) {
+ skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
+ hw->intr_mask &= ~IS_R2_F;
+ netif_rx_schedule(hw->dev[1]);
+ }
+
+ if (status & IS_PA_TO_RX2) {
+ struct skge_port *skge = netdev_priv(hw->dev[1]);
+ ++skge->net_stats.rx_over_errors;
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX2);
+ }
+
+ if (status & IS_PA_TO_TX2)
+ skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX2);
+
+ if (status & IS_MAC2)
+ skge_mac_intr(hw, 1);
+ }
if (status & IS_HW_ERR)
skge_error_irq(hw);
skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock(&hw->hw_lock);
return IRQ_HANDLED;
}
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
memcpy_toio(hw->regs + B2_MAC_1 + port*8,
dev->dev_addr, ETH_ALEN);
gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
}
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
return 0;
}
else
hw->ram_size = t8 * 4096;
+ spin_lock_init(&hw->hw_lock);
hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1;
if (hw->ports > 1)
hw->intr_mask |= IS_PORT_2;
skge_write32(hw, B0_IMSK, hw->intr_mask);
- spin_lock_bh(&hw->phy_lock);
+ mutex_lock(&hw->phy_mutex);
for (i = 0; i < hw->ports; i++) {
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_reset(hw, i);
else
yukon_reset(hw, i);
}
- spin_unlock_bh(&hw->phy_lock);
+ mutex_unlock(&hw->phy_mutex);
return 0;
}
}
hw->pdev = pdev;
- spin_lock_init(&hw->phy_lock);
- tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
+ mutex_init(&hw->phy_mutex);
+ INIT_WORK(&hw->phy_work, skge_extirq, hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
if ((dev = skge_devinit(hw, 0, using_dac)) == NULL)
goto err_out_led_off;
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ printk(KERN_ERR PFX "%s: bad (zero?) ethernet address in rom\n",
+ pci_name(pdev));
+ err = -EIO;
+ goto err_out_free_netdev;
+ }
+
+
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "%s: cannot register net device\n",
dev0 = hw->dev[0];
unregister_netdev(dev0);
+ spin_lock_irq(&hw->hw_lock);
+ hw->intr_mask = 0;
skge_write32(hw, B0_IMSK, 0);
+ spin_unlock_irq(&hw->hw_lock);
+
skge_write16(hw, B0_LED, LED_STAT_OFF);
skge_write8(hw, B0_CTST, CS_RST_SET);
- tasklet_kill(&hw->ext_tasklet);
+ flush_scheduled_work();
free_irq(pdev->irq, hw);
pci_release_regions(pdev);
struct skge_hw {
void __iomem *regs;
struct pci_dev *pdev;
+ spinlock_t hw_lock;
u32 intr_mask;
struct net_device *dev[2];
u32 ram_size;
u32 ram_offset;
u16 phy_addr;
-
- struct tasklet_struct ext_tasklet;
- spinlock_t phy_lock;
+ struct work_struct phy_work;
+ struct mutex phy_mutex;
};
enum {
#define TX_QUEUE_NO 4
#define MAX_HW_MIB_COUNTER 32
-#define VELOCITY_MIN_MTU (1514-14)
+#define VELOCITY_MIN_MTU (64)
#define VELOCITY_MAX_MTU (9000)
/*
say M here and read <file:Documentation/modules.txt>. The module
will be called prism54.ko.
+config USB_ZD1201
+ tristate "USB ZD1201 based Wireless device support"
+ depends on USB && NET_RADIO
+ select FW_LOADER
+ ---help---
+ Say Y if you want to use wireless LAN adapters based on the ZyDAS
+ ZD1201 chip.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on wlan0.
+
+ The zd1201 device requires external firmware to be loaded.
+ This can be found at http://linux-lc100020.sourceforge.net/
+
+ To compile this driver as a module, choose M here: the
+ module will be called zd1201.
+
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
+
+obj-$(CONFIG_USB_ZD1201) += zd1201.o
static u16 generate_cookie(struct bcm43xx_dmaring *ring,
int slot)
{
- u16 cookie = 0x0000;
+ u16 cookie = 0xF000;
/* Use the upper 4 bits of the cookie as
* DMA controller ID and store the slot number
- * in the lower 12 bits
+ * in the lower 12 bits.
+ * Note that the cookie must never be 0, as this
+ * is a special value used in RX path.
*/
switch (ring->mmio_base) {
default:
assert(0);
case BCM43xx_MMIO_DMA1_BASE:
+ cookie = 0xA000;
break;
case BCM43xx_MMIO_DMA2_BASE:
- cookie = 0x1000;
+ cookie = 0xB000;
break;
case BCM43xx_MMIO_DMA3_BASE:
- cookie = 0x2000;
+ cookie = 0xC000;
break;
case BCM43xx_MMIO_DMA4_BASE:
- cookie = 0x3000;
+ cookie = 0xD000;
break;
}
assert(((u16)slot & 0xF000) == 0x0000);
struct bcm43xx_dmaring *ring = NULL;
switch (cookie & 0xF000) {
- case 0x0000:
+ case 0xA000:
ring = dma->tx_ring0;
break;
- case 0x1000:
+ case 0xB000:
ring = dma->tx_ring1;
break;
- case 0x2000:
+ case 0xC000:
ring = dma->tx_ring2;
break;
- case 0x3000:
+ case 0xD000:
ring = dma->tx_ring3;
break;
default:
/* We received an xmit status. */
struct bcm43xx_hwxmitstatus *hw = (struct bcm43xx_hwxmitstatus *)skb->data;
struct bcm43xx_xmitstatus stat;
+ int i = 0;
stat.cookie = le16_to_cpu(hw->cookie);
+ while (stat.cookie == 0) {
+ if (unlikely(++i >= 10000)) {
+ assert(0);
+ break;
+ }
+ udelay(2);
+ barrier();
+ stat.cookie = le16_to_cpu(hw->cookie);
+ }
stat.flags = hw->flags;
stat.cnt1 = hw->cnt1;
stat.cnt2 = hw->cnt2;
unsigned long flags;
int keyidx;
- dprintk(KERN_INFO PFX "set security called\n");
+ dprintk(KERN_INFO PFX "set security called");
bcm43xx_lock_mmio(bcm, flags);
if (sec->flags & SEC_ACTIVE_KEY) {
secinfo->active_key = sec->active_key;
- dprintk(KERN_INFO PFX " .active_key = %d\n", sec->active_key);
+ dprintk(", .active_key = %d", sec->active_key);
}
if (sec->flags & SEC_UNICAST_GROUP) {
secinfo->unicast_uses_group = sec->unicast_uses_group;
- dprintk(KERN_INFO PFX " .unicast_uses_group = %d\n", sec->unicast_uses_group);
+ dprintk(", .unicast_uses_group = %d", sec->unicast_uses_group);
}
if (sec->flags & SEC_LEVEL) {
secinfo->level = sec->level;
- dprintk(KERN_INFO PFX " .level = %d\n", sec->level);
+ dprintk(", .level = %d", sec->level);
}
if (sec->flags & SEC_ENABLED) {
secinfo->enabled = sec->enabled;
- dprintk(KERN_INFO PFX " .enabled = %d\n", sec->enabled);
+ dprintk(", .enabled = %d", sec->enabled);
}
if (sec->flags & SEC_ENCRYPT) {
secinfo->encrypt = sec->encrypt;
- dprintk(KERN_INFO PFX " .encrypt = %d\n", sec->encrypt);
+ dprintk(", .encrypt = %d", sec->encrypt);
}
+ dprintk("\n");
if (bcm->initialized && !bcm->ieee->host_encrypt) {
if (secinfo->enabled) {
/* upload WEP keys to hardware */
{}
};
-static int ap = 0; /* Are we an AP or a normal station? */
+static int ap; /* Are we an AP or a normal station? */
#define ZD1201_VERSION "0.15"
static int zd1201_fw_upload(struct usb_device *dev, int apfw)
{
const struct firmware *fw_entry;
- char* data;
+ char *data;
unsigned long len;
int err;
unsigned char ret;
if (err) {
dev_err(&dev->dev, "Failed to load %s firmware file!\n", fwfile);
dev_err(&dev->dev, "Make sure the hotplug firmware loader is installed.\n");
- dev_err(&dev->dev, "Goto http://linux-lc100020.sourceforge.net for more info\n");
+ dev_err(&dev->dev, "Goto http://linux-lc100020.sourceforge.net for more info.\n");
return err;
}
USB_DIR_OUT | 0x40, 0, 0, NULL, 0, ZD1201_FW_TIMEOUT);
if (err < 0)
goto exit;
-
+
err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4,
USB_DIR_IN | 0x40, 0,0, &ret, sizeof(ret), ZD1201_FW_TIMEOUT);
if (err < 0)
goto exit;
-
+
if (ret & 0x80) {
err = -EIO;
goto exit;
return -ENOMEM;
}
usb_fill_bulk_urb(urb, zd->usb, usb_sndbulkpipe(zd->usb, zd->endp_out2),
- command, 16, zd1201_usbfree, zd);
+ command, 16, zd1201_usbfree, zd);
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret) {
kfree(command);
usb_free_urb(urb);
}
-
+
return ret;
}
fc = le16_to_cpu(*(__le16 *)&data[datalen-16]);
seq = le16_to_cpu(*(__le16 *)&data[datalen-24]);
- if(zd->monitor) {
+ if (zd->monitor) {
if (datalen < 24)
goto resubmit;
if (!(skb = dev_alloc_skb(datalen+24)))
goto resubmit;
}
hlist_for_each_entry(frag, node, &zd->fraglist, fnode)
- if(frag->seq == (seq&IEEE80211_SCTL_SEQ))
+ if (frag->seq == (seq&IEEE80211_SCTL_SEQ))
break;
if (!frag)
goto resubmit;
goto resubmit;
hlist_del_init(&frag->fnode);
kfree(frag);
- /* Fallthrough */
} else {
if (datalen<14)
goto resubmit;
int rid_fid;
int length;
unsigned char *pdata;
-
+
zd->rxdatas = 0;
err = zd1201_docmd(zd, ZD1201_CMDCODE_ACCESS, rid, 0, 0);
if (err)
length = zd->rxlen;
do {
- int actual_length;
+ int actual_length;
actual_length = (length > 64) ? 64 : length;
- if(pdata[0] != 0x3) {
+ if (pdata[0] != 0x3) {
dev_dbg(&zd->usb->dev, "Rx Resource packet type error: %02X\n",
pdata[0]);
return -EINVAL;
}
/* Skip the 4 bytes header (RID length and RID) */
- if(i == 0) {
+ if (i == 0) {
pdata += 8;
actual_length -= 8;
- }
- else {
+ } else {
pdata += 4;
actual_length -= 4;
}
short max;
__le16 zdmax;
unsigned char *buffer;
-
+
buffer = kzalloc(ZD1201_RXSIZE, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
err = usb_submit_urb(zd->rx_urb, GFP_KERNEL);
if (err)
goto err_buffer;
-
+
err = zd1201_docmd(zd, ZD1201_CMDCODE_INIT, 0, 0, 0);
if (err)
goto err_urb;
static int zd1201_disable(struct zd1201 *zd)
{
int err;
-
+
if (!zd->mac_enabled)
return 0;
if (zd->monitor) {
static int zd1201_net_stop(struct net_device *dev)
{
netif_stop_queue(dev);
-
return 0;
}
struct iw_request_info *info, char *name, char *extra)
{
strcpy(name, "IEEE 802.11b");
-
return 0;
}
if (err)
return err;
}
- zd->monitor=monitor;
+ zd->monitor = monitor;
/* If monitor mode is set we don't actually turn it on here since it
* is done during mac reset anyway (see zd1201_mac_enable).
*/
-
zd1201_mac_reset(zd);
return 0;
zd->iwstats.qual.updated = 2;
}
- return zd1201_getconfig(zd,ZD1201_RID_CURRENTBSSID,ap_addr->sa_data,6);
+ return zd1201_getconfig(zd, ZD1201_RID_CURRENTBSSID, ap_addr->sa_data, 6);
}
static int zd1201_set_scan(struct net_device *dev,
if (!rrq->fixed) { /* Also enable all lower bitrates */
rate |= rate-1;
}
-
+
err = zd1201_setconfig16(zd, ZD1201_RID_TXRATECNTL, rate);
if (err)
return err;
return -EINVAL;
erq->flags |= i+1;
-
+
erq->length = zd->encode_keylen[i];
memcpy(key, zd->encode_keys[i], erq->length);
return -EINVAL;
}
out:
- err = zd1201_setconfig16(zd, ZD1201_RID_CNFPMENABLED, enabled);
- if (err)
- return err;
-
- return 0;
+ return zd1201_setconfig16(zd, ZD1201_RID_CNFPMENABLED, enabled);
}
static int zd1201_get_power(struct net_device *dev,
struct iw_request_info *info, struct iw_param *rrq, char *extra)
{
struct zd1201 *zd = (struct zd1201 *)dev->priv;
- int err;
if (!zd->ap)
return -EOPNOTSUPP;
- err = zd1201_setconfig16(zd, ZD1201_RID_CNFHOSTAUTH, rrq->value);
- if (err)
- return err;
- return 0;
+ return zd1201_setconfig16(zd, ZD1201_RID_CNFHOSTAUTH, rrq->value);
}
static int zd1201_get_hostauth(struct net_device *dev,
{
struct zd1201 *zd;
struct usb_device *usb;
- int i, err;
+ int err;
short porttype;
char buf[IW_ESSID_MAX_SIZE+2];
if (!zd->rx_urb || !zd->tx_urb)
goto err_zd;
- for(i = 0; i<100; i++)
- udelay(1000);
-
+ mdelay(100);
err = zd1201_drvr_start(zd);
if (err)
goto err_zd;
goto err_net;
dev_info(&usb->dev, "%s: ZD1201 USB Wireless interface\n",
zd->dev->name);
-
+
usb_set_intfdata(interface, zd);
return 0;
{
struct pcmcia_socket *s = pcmcia_get_socket(skt);
+ if (!s) {
+ printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \
+ "failed, event 0x%x lost!\n", skt, event);
+ return -ENODEV;
+ }
+
ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n",
event, priority, skt);
struct platform_device *pdev = to_platform_device(dev);
struct m48t86_ops *ops = pdev->dev.platform_data;
- reg = ops->readb(M48T86_REG_B);
+ reg = ops->readbyte(M48T86_REG_B);
if (reg & M48T86_REG_B_DM) {
/* data (binary) mode */
- tm->tm_sec = ops->readb(M48T86_REG_SEC);
- tm->tm_min = ops->readb(M48T86_REG_MIN);
- tm->tm_hour = ops->readb(M48T86_REG_HOUR) & 0x3F;
- tm->tm_mday = ops->readb(M48T86_REG_DOM);
+ tm->tm_sec = ops->readbyte(M48T86_REG_SEC);
+ tm->tm_min = ops->readbyte(M48T86_REG_MIN);
+ tm->tm_hour = ops->readbyte(M48T86_REG_HOUR) & 0x3F;
+ tm->tm_mday = ops->readbyte(M48T86_REG_DOM);
/* tm_mon is 0-11 */
- tm->tm_mon = ops->readb(M48T86_REG_MONTH) - 1;
- tm->tm_year = ops->readb(M48T86_REG_YEAR) + 100;
- tm->tm_wday = ops->readb(M48T86_REG_DOW);
+ tm->tm_mon = ops->readbyte(M48T86_REG_MONTH) - 1;
+ tm->tm_year = ops->readbyte(M48T86_REG_YEAR) + 100;
+ tm->tm_wday = ops->readbyte(M48T86_REG_DOW);
} else {
/* bcd mode */
- tm->tm_sec = BCD2BIN(ops->readb(M48T86_REG_SEC));
- tm->tm_min = BCD2BIN(ops->readb(M48T86_REG_MIN));
- tm->tm_hour = BCD2BIN(ops->readb(M48T86_REG_HOUR) & 0x3F);
- tm->tm_mday = BCD2BIN(ops->readb(M48T86_REG_DOM));
+ tm->tm_sec = BCD2BIN(ops->readbyte(M48T86_REG_SEC));
+ tm->tm_min = BCD2BIN(ops->readbyte(M48T86_REG_MIN));
+ tm->tm_hour = BCD2BIN(ops->readbyte(M48T86_REG_HOUR) & 0x3F);
+ tm->tm_mday = BCD2BIN(ops->readbyte(M48T86_REG_DOM));
/* tm_mon is 0-11 */
- tm->tm_mon = BCD2BIN(ops->readb(M48T86_REG_MONTH)) - 1;
- tm->tm_year = BCD2BIN(ops->readb(M48T86_REG_YEAR)) + 100;
- tm->tm_wday = BCD2BIN(ops->readb(M48T86_REG_DOW));
+ tm->tm_mon = BCD2BIN(ops->readbyte(M48T86_REG_MONTH)) - 1;
+ tm->tm_year = BCD2BIN(ops->readbyte(M48T86_REG_YEAR)) + 100;
+ tm->tm_wday = BCD2BIN(ops->readbyte(M48T86_REG_DOW));
}
/* correct the hour if the clock is in 12h mode */
if (!(reg & M48T86_REG_B_H24))
- if (ops->readb(M48T86_REG_HOUR) & 0x80)
+ if (ops->readbyte(M48T86_REG_HOUR) & 0x80)
tm->tm_hour += 12;
return 0;
struct platform_device *pdev = to_platform_device(dev);
struct m48t86_ops *ops = pdev->dev.platform_data;
- reg = ops->readb(M48T86_REG_B);
+ reg = ops->readbyte(M48T86_REG_B);
/* update flag and 24h mode */
reg |= M48T86_REG_B_SET | M48T86_REG_B_H24;
- ops->writeb(reg, M48T86_REG_B);
+ ops->writebyte(reg, M48T86_REG_B);
if (reg & M48T86_REG_B_DM) {
/* data (binary) mode */
- ops->writeb(tm->tm_sec, M48T86_REG_SEC);
- ops->writeb(tm->tm_min, M48T86_REG_MIN);
- ops->writeb(tm->tm_hour, M48T86_REG_HOUR);
- ops->writeb(tm->tm_mday, M48T86_REG_DOM);
- ops->writeb(tm->tm_mon + 1, M48T86_REG_MONTH);
- ops->writeb(tm->tm_year % 100, M48T86_REG_YEAR);
- ops->writeb(tm->tm_wday, M48T86_REG_DOW);
+ ops->writebyte(tm->tm_sec, M48T86_REG_SEC);
+ ops->writebyte(tm->tm_min, M48T86_REG_MIN);
+ ops->writebyte(tm->tm_hour, M48T86_REG_HOUR);
+ ops->writebyte(tm->tm_mday, M48T86_REG_DOM);
+ ops->writebyte(tm->tm_mon + 1, M48T86_REG_MONTH);
+ ops->writebyte(tm->tm_year % 100, M48T86_REG_YEAR);
+ ops->writebyte(tm->tm_wday, M48T86_REG_DOW);
} else {
/* bcd mode */
- ops->writeb(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
- ops->writeb(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
- ops->writeb(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
- ops->writeb(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
- ops->writeb(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
- ops->writeb(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
- ops->writeb(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
+ ops->writebyte(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
+ ops->writebyte(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
+ ops->writebyte(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
+ ops->writebyte(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
+ ops->writebyte(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
+ ops->writebyte(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
+ ops->writebyte(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
}
/* update ended */
reg &= ~M48T86_REG_B_SET;
- ops->writeb(reg, M48T86_REG_B);
+ ops->writebyte(reg, M48T86_REG_B);
return 0;
}
struct platform_device *pdev = to_platform_device(dev);
struct m48t86_ops *ops = pdev->dev.platform_data;
- reg = ops->readb(M48T86_REG_B);
+ reg = ops->readbyte(M48T86_REG_B);
seq_printf(seq, "mode\t\t: %s\n",
(reg & M48T86_REG_B_DM) ? "binary" : "bcd");
- reg = ops->readb(M48T86_REG_D);
+ reg = ops->readbyte(M48T86_REG_D);
seq_printf(seq, "battery\t\t: %s\n",
(reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
platform_set_drvdata(dev, rtc);
/* read battery status */
- reg = ops->readb(M48T86_REG_D);
+ reg = ops->readbyte(M48T86_REG_D);
dev_info(&dev->dev, "battery %s\n",
(reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
union {
__u8 fc; /* SPID function code */
struct path_state ps; /* SNID path state */
- } inf;
+ } __attribute__ ((packed)) inf;
union {
__u32 cpu_addr : 16; /* CPU address */
struct extended_cssid ext_cssid;
- } pgid_high;
+ } __attribute__ ((packed)) pgid_high;
__u32 cpu_id : 24; /* CPU identification */
__u32 cpu_model : 16; /* CPU model */
__u32 tod_high; /* high word TOD clock */
/* Unit check but no sense data. Need basic sense. */
if (ccw_device_do_sense(cdev, irb) != 0)
goto call_handler_unsol;
- memcpy(irb, &cdev->private->irb, sizeof(struct irb));
+ memcpy(&cdev->private->irb, irb, sizeof(struct irb));
cdev->private->state = DEV_STATE_W4SENSE;
cdev->private->intparm = 0;
return;
int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
{
if (ap->flags & ATA_FLAG_SUSPENDED) {
+ ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000);
ap->flags &= ~ATA_FLAG_SUSPENDED;
ata_set_mode(ap);
}
return -ENODEV;
}
+static int ppa_adjust_queue(struct scsi_device *device)
+{
+ blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
+ return 0;
+}
+
static struct scsi_host_template ppa_template = {
.module = THIS_MODULE,
.proc_name = "ppa",
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
.can_queue = 1,
+ .slave_alloc = ppa_adjust_queue,
};
/***************************************************************************
*/
msleep(10);
- prb->ctrl = PRB_CTRL_SRST;
+ prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
- prb->ctrl = PRB_CTRL_PACKET_WRITE;
+ prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE);
else
- prb->ctrl = PRB_CTRL_PACKET_READ;
+ prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ);
} else
prb->ctrl = 0;
{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
{"HP", "C1557A", NULL, BLIST_FORCELUN},
{"HP", "C3323-300", "4269", BLIST_NOTQ},
+ {"HP", "C5713A", NULL, BLIST_NOREPORTLUN},
{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
int nsegs, unsigned bufflen, gfp_t gfp)
{
struct request_queue *q = rq->q;
- int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned int data_len = 0, len, bytes, off;
struct page *page;
struct bio *bio = NULL;
list_for_each_entry(rphy, &sas_host->rphy_list, list) {
struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
- if (rphy->scsi_target_id == -1)
+ if (rphy->identify.device_type != SAS_END_DEVICE ||
+ rphy->scsi_target_id == -1)
continue;
if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
#define SETUP_TEMPLATE(attrb, field, perm, test) \
i->private_##attrb[count] = class_device_attr_##field; \
i->private_##attrb[count].attr.mode = perm; \
- i->private_##attrb[count].store = NULL; \
i->attrb[count] = &i->private_##attrb[count]; \
if (test) \
count++
struct fs_uart_platform_info *pdata;
struct platform_device* pdev = early_uart_get_pdev(co->index);
- port =
- (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
- pinfo = (struct uart_cpm_port *)port;
if (!pdev) {
pr_info("cpm_uart: console: compat mode\n");
/* compatibility - will be cleaned up */
cpm_uart_init_portdesc();
+ }
+ port =
+ (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
+ pinfo = (struct uart_cpm_port *)port;
+ if (!pdev) {
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
} else {
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
mem_addr = alloc_bootmem(memsz);
- dma_addr = mem_addr;
+ dma_addr = virt_to_bus(mem_addr);
}
else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
some cases CDC MDLM) protocol, not "g_ether".
-config USB_ZD1201
- tristate "USB ZD1201 based Wireless device support"
- depends on NET_RADIO
- select FW_LOADER
- ---help---
- Say Y if you want to use wireless LAN adapters based on the ZyDAS
- ZD1201 chip.
-
- This driver makes the adapter appear as a normal Ethernet interface,
- typically on wlan0.
-
- The zd1201 device requires external firmware to be loaded.
- This can be found at http://linux-lc100020.sourceforge.net/
-
- To compile this driver as a module, choose M here: the
- module will be called zd1201.
-
endmenu
obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
-obj-$(CONFIG_USB_ZD1201) += zd1201.o
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
*/
int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
- u32 *palette = fbdev->regs->lcd_pallettebase;
+ struct au1100fb_device *fbdev;
+ u32 *palette;
u32 value;
+ fbdev = to_au1100fb_device(fbi);
+ palette = fbdev->regs->lcd_pallettebase;
+
if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
return -EINVAL;
*/
int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ struct au1100fb_device *fbdev;
int dy;
+ fbdev = to_au1100fb_device(fbi);
+
print_dbg("fb_pan_display %p %p", var, fbi);
if (!var || !fbdev) {
*/
int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ struct au1100fb_device *fbdev;
unsigned int len;
unsigned long start=0, off;
+ fbdev = to_au1100fb_device(fbi);
+
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
}
if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
DRIVER_NAME)) {
- print_err("fail to lock memory region at 0x%08x",
+ print_err("fail to lock memory region at 0x%08lx",
au1100fb_fix.mmio_start);
return -EBUSY;
}
return 0;
}
-int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
{
/* TODO */
return 0;
}
-int au1100fb_drv_resume(struct device *dev, u32 level)
+int au1100fb_drv_resume(struct device *dev)
{
/* TODO */
return 0;
scr_memcpyw((u16 *) q, (u16 *) p,
vc->vc_size_row);
}
- softback_in = p;
+ softback_in = softback_curr = p;
update_region(vc, vc->vc_origin,
logo_lines * vc->vc_cols);
}
};
static struct fb_fix_screeninfo maxinefb_fix = {
- .id = "Maxine onboard graphics 1024x768x8",
+ .id = "Maxine",
.smem_len = (1024*768),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
static struct fb_ops maxinefb_ops = {
.owner = THIS_MODULE,
- .fb_get_fix = gen_get_fix,
- .fb_get_var = gen_get_var,
.fb_setcolreg = maxinefb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
+Version 1.43
+------------
+POSIX locking to servers which support CIFS POSIX Extensions
+(disabled by default controlled by proc/fs/cifs/Experimental).
+Handle conversion of long share names (especially Asian languages)
+to Unicode during mount.
+
Version 1.42
------------
Fix slow oplock break when mounted to different servers at the same time and
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern int cifs_ioctl (struct inode * inode, struct file * filep,
unsigned int command, unsigned long arg);
-#define CIFS_VERSION "1.42"
+#define CIFS_VERSION "1.43"
#endif /* _CIFSFS_H */
const int waitFlag);
extern int CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const int get_flag,
- const __u64 len, const __u64 offset,
+ const __u64 len, struct file_lock *,
const __u16 lock_type, const int waitFlag);
extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon);
extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses);
int
CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const int get_flag, const __u64 len,
- const __u64 lkoffset, const __u16 lock_type, const int waitFlag)
+ struct file_lock *pLockData, const __u16 lock_type,
+ const int waitFlag)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
__u16 params, param_offset, offset, byte_count, count;
cFYI(1, ("Posix Lock"));
+
+ if(pLockData == NULL)
+ return EINVAL;
+
rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
if (rc)
parm_data->lock_type = cpu_to_le16(lock_type);
if(waitFlag)
- parm_data->lock_flags = 1;
+ parm_data->lock_flags = cpu_to_le16(1);
parm_data->pid = cpu_to_le32(current->tgid);
- parm_data->start = lkoffset;
- parm_data->length = len; /* normalize negative numbers */
+ parm_data->start = cpu_to_le64(pLockData->fl_start);
+ parm_data->length = cpu_to_le64(len); /* normalize negative numbers */
pSMB->DataOffset = cpu_to_le16(offset);
pSMB->Fid = smb_file_id;
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
if (rc) {
cFYI(1, ("Send error in Posix Lock = %d", rc));
- }
+ } else if (get_flag) {
+ /* lock structure can be returned on get */
+ __u16 data_offset;
+ __u16 data_count;
+ rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+ if (rc || (pSMBr->ByteCount < sizeof(struct cifs_posix_lock))) {
+ rc = -EIO; /* bad smb */
+ goto plk_err_exit;
+ }
+ if(pLockData == NULL) {
+ rc = -EINVAL;
+ goto plk_err_exit;
+ }
+ data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
+ data_count = le16_to_cpu(pSMBr->t2.DataCount);
+ if(data_count < sizeof(struct cifs_posix_lock)) {
+ rc = -EIO;
+ goto plk_err_exit;
+ }
+ parm_data = (struct cifs_posix_lock *)
+ ((char *)&pSMBr->hdr.Protocol + data_offset);
+ if(parm_data->lock_type == cpu_to_le16(CIFS_UNLCK))
+ pLockData->fl_type = F_UNLCK;
+ }
+
+plk_err_exit:
if (pSMB)
cifs_small_buf_release(pSMB);
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(2 * (len + 1), GFP_KERNEL);
if(ses->serverOS == NULL)
goto sesssetup_nomem;
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *)bcc_ptr,
remaining_words-1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2 * (len + 1),GFP_KERNEL);
if(ses->serverNOS == NULL)
goto sesssetup_nomem;
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2*(len+1),GFP_KERNEL);
if(ses->serverDomain == NULL)
ses->serverDomain[2*len] = 0;
ses->serverDomain[1+(2*len)] = 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
+ }
} else { /* no room so create dummy domain and NOS string */
/* if these kcallocs fail not much we
can do, but better to not fail the
sesssetup itself */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2, GFP_KERNEL);
}
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1,GFP_KERNEL);
if(ses->serverOS == NULL)
goto sesssetup_nomem;
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(len + 1,GFP_KERNEL);
if(ses->serverNOS == NULL)
goto sesssetup_nomem;
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len + 1,GFP_KERNEL);
if(ses->serverDomain == NULL)
goto sesssetup_nomem;
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
len = UniStrnlen((wchar_t *)bcc_ptr,
remaining_words
- 1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2 * (len + 1),
GFP_KERNEL);
remaining_words -= len + 1;
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+ /* last string not null terminated (e.g.Windows XP/2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2*(len+1),GFP_KERNEL);
cifs_strfromUCS_le(ses->serverDomain,
(__le16 *)bcc_ptr,
ses->serverDomain[2*len] = 0;
ses->serverDomain[1+(2*len)] = 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2,GFP_KERNEL);
- } else { /* no room so create dummy domain and NOS string */
+ }
+ } else {/* no room use dummy domain&NOS */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2, GFP_KERNEL);
}
} else { /* ASCII */
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
strncpy(ses->serverOS, bcc_ptr, len);
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(len + 1,GFP_KERNEL);
strncpy(ses->serverNOS, bcc_ptr, len);
bcc_ptr += len;
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len + 1, GFP_KERNEL);
strncpy(ses->serverDomain, bcc_ptr, len);
bcc_ptr += len;
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
bcc_ptr,
remaining_words
- 1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2 * (len + 1),
GFP_KERNEL);
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2 *
(len +
[1 + (2 * len)]
= 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2,
GFP_KERNEL);
+ }
} else { /* no room so create dummy domain and NOS string */
+ if(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2, GFP_KERNEL);
}
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(len + 1,
GFP_KERNEL);
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(len + 1,
GFP_KERNEL);
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(len + 1,
GFP_KERNEL);
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
bcc_ptr,
remaining_words
- 1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2 * (len + 1),
GFP_KERNEL);
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string not always null terminated (e.g. for Windows XP & 2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2 *
(len +
len)]
= 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2,GFP_KERNEL);
+ }
} else { /* no room so create dummy domain and NOS string */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2, GFP_KERNEL);
}
} else { /* ASCII */
if (((long) bcc_ptr + len) -
(long) pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1,GFP_KERNEL);
strncpy(ses->serverOS,bcc_ptr, len);
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(len+1,GFP_KERNEL);
strncpy(ses->serverNOS, bcc_ptr, len);
bcc_ptr += len;
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len+1,GFP_KERNEL);
strncpy(ses->serverDomain, bcc_ptr, len);
bcc_ptr += len;
bcc_ptr++; /* align */
}
- if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ if(ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
if (ses->capabilities & CAP_STATUS32) {
if (ses->capabilities & CAP_UNICODE) {
smb_buffer->Flags2 |= SMBFLG2_UNICODE;
length =
- cifs_strtoUCS((__le16 *) bcc_ptr, tree, 100, nls_codepage);
- bcc_ptr += 2 * length; /* convert num of 16 bit words to bytes */
+ cifs_strtoUCS((__le16 *) bcc_ptr, tree,
+ 6 /* max utf8 char length in bytes */ *
+ (/* server len*/ + 256 /* share len */), nls_codepage);
+ bcc_ptr += 2 * length; /* convert num 16 bit words to bytes */
bcc_ptr += 2; /* skip trailing null */
} else { /* ASCII */
strcpy(bcc_ptr, tree);
return FILE_OVERWRITE_IF;
else if ((flags & O_CREAT) == O_CREAT)
return FILE_OPEN_IF;
+ else if ((flags & O_TRUNC) == O_TRUNC)
+ return FILE_OVERWRITE;
else
return FILE_OPEN;
}
else
posix_lock_type = CIFS_WRLCK;
rc = CIFSSMBPosixLock(xid, pTcon, netfid, 1 /* get */,
- length, pfLock->fl_start,
+ length, pfLock,
posix_lock_type, wait_flag);
FreeXid(xid);
return rc;
return -EOPNOTSUPP;
}
rc = CIFSSMBPosixLock(xid, pTcon, netfid, 0 /* set */,
- length, pfLock->fl_start,
+ length, pfLock,
posix_lock_type, wait_flag);
} else
rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
if (rc != 0)
break;
}
- if(experimEnabled || (pTcon->ses->server->secMode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) == 0) {
+ if(experimEnabled || (pTcon->ses->server &&
+ ((pTcon->ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ == 0))) {
struct kvec iov[2];
unsigned int len;
if (input->group != sbi->s_groups_count) {
ext3_warning(sb, __FUNCTION__,
"multiple resizers run on filesystem!");
- unlock_super(sb);
err = -EBUSY;
goto exit_journal;
}
nd->flags = flags;
nd->depth = 0;
- read_lock(¤t->fs->lock);
if (*name=='/') {
+ read_lock(¤t->fs->lock);
if (current->fs->altroot && !(nd->flags & LOOKUP_NOALT)) {
nd->mnt = mntget(current->fs->altrootmnt);
nd->dentry = dget(current->fs->altroot);
}
nd->mnt = mntget(current->fs->rootmnt);
nd->dentry = dget(current->fs->root);
+ read_unlock(¤t->fs->lock);
} else if (dfd == AT_FDCWD) {
+ read_lock(¤t->fs->lock);
nd->mnt = mntget(current->fs->pwdmnt);
nd->dentry = dget(current->fs->pwd);
+ read_unlock(¤t->fs->lock);
} else {
struct dentry *dentry;
file = fget_light(dfd, &fput_needed);
retval = -EBADF;
if (!file)
- goto unlock_fail;
+ goto out_fail;
dentry = file->f_dentry;
retval = -ENOTDIR;
if (!S_ISDIR(dentry->d_inode->i_mode))
- goto fput_unlock_fail;
+ goto fput_fail;
retval = file_permission(file, MAY_EXEC);
if (retval)
- goto fput_unlock_fail;
+ goto fput_fail;
nd->mnt = mntget(file->f_vfsmnt);
nd->dentry = dget(dentry);
fput_light(file, fput_needed);
}
- read_unlock(¤t->fs->lock);
current->total_link_count = 0;
retval = link_path_walk(name, nd);
out:
nd->dentry->d_inode))
audit_inode(name, nd->dentry->d_inode, flags);
}
+out_fail:
return retval;
-fput_unlock_fail:
+fput_fail:
fput_light(file, fput_needed);
-unlock_fail:
- read_unlock(¤t->fs->lock);
- return retval;
+ goto out_fail;
}
int fastcall path_lookup(const char *name, unsigned int flags,
#define hard_smp_processor_id() __hard_smp_processor_id()
#define raw_smp_processor_id() (current_thread_info()->cpu)
-extern cpumask_t cpu_present_mask;
-extern cpumask_t cpu_online_map;
extern int smp_num_cpus;
-#define cpu_possible_map cpu_present_mask
+#define cpu_possible_map cpu_present_map
int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, cpumask_t cpu);
{
extern unsigned int processor_id;
- if (((processor_id & 15) >= 2) || machine_is_roadrunner())
+ if (((processor_id & 15) >= 4) || machine_is_roadrunner())
return 1;
return 0;
#define UARTDR 0x00 /* Tx/Rx data */
#define RXSTAT 0x04 /* Rx status */
#define H_UBRLCR 0x08 /* mode register high */
-#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
+#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
#define UARTCON 0x14 /* control register */
#define UARTFLG 0x18 /* flag register */
* Changelog:
* 05-01-2000 SJH Created
* 05-13-2000 SJH Filled in function bodies
- * 07-26-2000 SJH Removed hard coded buad rate
+ * 07-26-2000 SJH Removed hard coded baud rate
*/
#include <asm/hardware.h>
}
#endif
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define cpu_is_xscale() 0
+#else
+#define cpu_is_xscale() 1
+#endif
+
#define set_cr(x) \
__asm__ __volatile__( \
"mcr p15, 0, %0, c1, c0, 0 @ set CR" \
#define lazy_mmu_prot_update(pte) do { } while (0)
#endif
-#ifndef __HAVE_ARCH_MULTIPLE_ZERO_PAGE
+#ifndef __HAVE_ARCH_MOVE_PTE
#define move_pte(pte, prot, old_addr, new_addr) (pte)
-#else
-#define move_pte(pte, prot, old_addr, new_addr) \
-({ \
- pte_t newpte = (pte); \
- if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \
- pte_page(pte) == ZERO_PAGE(old_addr)) \
- newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \
- newpte; \
-})
#endif
/*
#if defined (CONFIG_CPU_R4300) \
|| defined (CONFIG_CPU_R4X00) \
|| defined (CONFIG_CPU_R5000) \
+ || defined (CONFIG_CPU_RM7000) \
|| defined (CONFIG_CPU_NEVADA) \
|| defined (CONFIG_CPU_TX49XX) \
|| defined (CONFIG_CPU_MIPS64)
#define PRID_IMP_R4300 0x0b00
#define PRID_IMP_VR41XX 0x0c00
#define PRID_IMP_R12000 0x0e00
+#define PRID_IMP_R14000 0x0f00
#define PRID_IMP_R8000 0x1000
#define PRID_IMP_PR4450 0x1200
#define PRID_IMP_R4600 0x2000
#define PRID_IMP_24K 0x9300
#define PRID_IMP_34K 0x9500
#define PRID_IMP_24KE 0x9600
+#define PRID_IMP_74K 0x9700
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
#define CPU_34K 60
#define CPU_PR4450 61
#define CPU_SB1A 62
-#define CPU_LAST 62
+#define CPU_74K 63
+#define CPU_R14000 64
+#define CPU_LAST 64
/*
* ISA Level encodings
{
if (sizeof(long) == 4)
__asm__ __volatile__ (
- ".set\tnoreorder\n"
- "1:\tbnez\t%0,1b\n\t"
- "subu\t%0,1\n\t"
- ".set\treorder"
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " subu %0, 1 \n"
+ " .set reorder \n"
: "=r" (loops)
: "0" (loops));
else if (sizeof(long) == 8)
__asm__ __volatile__ (
- ".set\tnoreorder\n"
- "1:\tbnez\t%0,1b\n\t"
- "dsubu\t%0,1\n\t"
- ".set\treorder"
- :"=r" (loops)
- :"0" (loops));
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " dsubu %0, 1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops));
}
#include <linux/futex.h>
#include <asm/errno.h>
#include <asm/uaccess.h>
+#include <asm/war.h>
#ifdef CONFIG_SMP
#define __FUTEX_SMP_SYNC " sync \n"
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
{ \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set noat \n" \
- " .set mips3 \n" \
- "1: ll %1, (%3) # __futex_atomic_op1 \n" \
- " .set mips0 \n" \
- " " insn " \n" \
- " .set mips3 \n" \
- "2: sc $1, (%3) \n" \
- " beqzl $1, 1b \n" \
- __FUTEX_SMP_SYNC \
- "3: \n" \
- " .set pop \n" \
- " .set mips0 \n" \
- " .section .fixup,\"ax\" \n" \
- "4: li %0, %5 \n" \
- " j 2b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " "__UA_ADDR "\t1b, 4b \n" \
- " "__UA_ADDR "\t2b, 4b \n" \
- " .previous \n" \
- : "=r" (ret), "=r" (oldval) \
- : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+ if (cpu_has_llsc && R10000_LLSC_WAR) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, (%3) # __futex_atomic_op \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, (%3) \n" \
+ " beqzl $1, 1b \n" \
+ __FUTEX_SMP_SYNC \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %5 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=r" (oldval) \
+ : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+ } else if (cpu_has_llsc) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, (%3) # __futex_atomic_op \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, (%3) \n" \
+ " beqz $1, 1b \n" \
+ __FUTEX_SMP_SYNC \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %5 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=r" (oldval) \
+ : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+ } else \
+ ret = -ENOSYS; \
}
static inline int
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
- return -ENOSYS;
+ int retval;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ "# futex_atomic_cmpxchg_inatomic \n"
+ " .set push \n"
+ " .set noat \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 \n"
+ " bne %0, %z3, 3f \n"
+ " .set mips0 \n"
+ " move $1, %z4 \n"
+ " .set mips3 \n"
+ "2: sc $1, %1 \n"
+ " beqzl $1, 1b \n"
+ __FUTEX_SMP_SYNC
+ "3: \n"
+ " .set pop \n"
+ " .section .fixup,\"ax\" \n"
+ "4: li %0, %5 \n"
+ " j 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " "__UA_ADDR "\t1b, 4b \n"
+ " "__UA_ADDR "\t2b, 4b \n"
+ " .previous \n"
+ : "=&r" (retval), "=R" (*uaddr)
+ : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ __asm__ __volatile__(
+ "# futex_atomic_cmpxchg_inatomic \n"
+ " .set push \n"
+ " .set noat \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 \n"
+ " bne %0, %z3, 3f \n"
+ " .set mips0 \n"
+ " move $1, %z4 \n"
+ " .set mips3 \n"
+ "2: sc $1, %1 \n"
+ " beqz $1, 1b \n"
+ __FUTEX_SMP_SYNC
+ "3: \n"
+ " .set pop \n"
+ " .section .fixup,\"ax\" \n"
+ "4: li %0, %5 \n"
+ " j 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " "__UA_ADDR "\t1b, 4b \n"
+ " "__UA_ADDR "\t2b, 4b \n"
+ " .previous \n"
+ : "=&r" (retval), "=R" (*uaddr)
+ : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "memory");
+ } else
+ return -ENOSYS;
+
+ return retval;
}
#endif
* for more details.
*
* Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
*/
#ifndef _ASM_INST_H
#define _ASM_INST_H
cop0_op, cop1_op, cop2_op, cop1x_op,
beql_op, bnel_op, blezl_op, bgtzl_op,
daddi_op, daddiu_op, ldl_op, ldr_op,
- major_1c_op, jalx_op, major_1e_op, major_1f_op,
+ spec2_op, jalx_op, mdmx_op, spec3_op,
lb_op, lh_op, lwl_op, lw_op,
lbu_op, lhu_op, lwr_op, lwu_op,
sb_op, sh_op, swl_op, sw_op,
sdl_op, sdr_op, swr_op, cache_op,
ll_op, lwc1_op, lwc2_op, pref_op,
lld_op, ldc1_op, ldc2_op, ld_op,
- sc_op, swc1_op, swc2_op, rdhwr_op,
+ sc_op, swc1_op, swc2_op, major_3b_op,
scd_op, sdc1_op, sdc2_op, sd_op
};
*/
enum spec_op {
sll_op, movc_op, srl_op, sra_op,
- sllv_op, srlv_op, srav_op, spec1_unused_op, /* Opcode 0x07 is unused */
+ sllv_op, pmon_op, srlv_op, srav_op,
jr_op, jalr_op, movz_op, movn_op,
syscall_op, break_op, spim_op, sync_op,
mfhi_op, mthi_op, mflo_op, mtlo_op,
};
/*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+ madd_op, maddu_op, mul_op, spec2_3_unused_op,
+ msub_op, msubu_op, /* more unused ops */
+ clz_op = 0x20, clo_op,
+ dclz_op = 0x24, dclo_op,
+ sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+ ext_op, dextm_op, dextu_op, dext_op,
+ ins_op, dinsm_op, dinsu_op, dins_op,
+ bshfl_op = 0x20,
+ dbshfl_op = 0x24,
+ rdhwr_op = 0x3f
+};
+
+/*
* rt field of bcond opcodes.
*/
enum rt_op {
* func field for mad opcodes (MIPS IV).
*/
enum mad_func {
- madd_op = 0x08, msub_op = 0x0a,
- nmadd_op = 0x0c, nmsub_op = 0x0e
+ madd_fp_op = 0x08, msub_fp_op = 0x0a,
+ nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e
};
/*
#define ST0_DL (_ULCAST_(1) << 24)
/*
- * Enable the MIPS DSP ASE
+ * Enable the MIPS MDMX and DSP ASEs
*/
#define ST0_MX 0x01000000
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+#ifndef CONFIG_SPARSEMEM
#ifndef CONFIG_NEED_MULTIPLE_NODES
#define pfn_valid(pfn) ((pfn) < max_mapnr)
#endif
+#endif
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
/*
- * Bits 0, 1, 2, 9 and 10 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
*/
-#define PTE_FILE_MAX_BITS 27
+#define PTE_FILE_MAX_BITS 28
-#define pte_to_pgoff(_pte) \
- ((((_pte).pte >> 3) & 0x3f ) + (((_pte).pte >> 11) << 8 ))
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
+ (((_pte).pte >> 2 ) & 0x38) | \
+ (((_pte).pte >> 10) << 6 ))
-#define pgoff_to_pte(off) \
- ((pte_t) { (((off) & 0x3f) << 3) + (((off) >> 8) << 11) + _PAGE_FILE })
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
+ (((off) & 0x38) << 2 ) | \
+ (((off) >> 6 ) << 10) | \
+ _PAGE_FILE })
#else
/* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
+#define __swp_offset(x) ((x).val >> 7)
+#define __swp_entry(type,offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
+#else
#define __swp_type(x) (((x).val >> 8) & 0x1f)
-#define __swp_offset(x) ((x).val >> 13)
+#define __swp_offset(x) ((x).val >> 13)
#define __swp_entry(type,offset) \
- ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+ ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
/*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
*/
-#define PTE_FILE_MAX_BITS 27
+#define PTE_FILE_MAX_BITS 30
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
- /* fixme */
-#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
-#define pgoff_to_pte(off) \
- ((pte_t){(((off) & 0x3f) + ((off) << 6) + _PAGE_FILE)})
+#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
#else
-#define pte_to_pgoff(_pte) \
- ((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS 28
+
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
+ (((_pte).pte >> 2) & 0x8) | \
+ (((_pte).pte >> 8) << 4))
-#define pgoff_to_pte(off) \
- ((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
+ (((off) & 0x8) << 2) | \
+ (((off) >> 4) << 8) | \
+ _PAGE_FILE })
#endif
#endif
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
+#else
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+#endif
#endif /* _ASM_PGTABLE_32_H */
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 32 bits of offset
- * into this range:
+ * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
+ * make things easier, and only use the upper 56 bits for the page offset...
*/
-#define PTE_FILE_MAX_BITS 32
+#define PTE_FILE_MAX_BITS 56
-#define pte_to_pgoff(_pte) \
- ((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
-
-#define pgoff_to_pte(off) \
- ((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pte_to_pgoff(_pte) ((_pte).pte >> 8)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 8) | _PAGE_FILE })
#endif /* _ASM_PGTABLE_64_H */
#define ZERO_PAGE(vaddr) \
(virt_to_page(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))
-#define __HAVE_ARCH_MULTIPLE_ZERO_PAGE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr) \
+({ \
+ pte_t newpte = (pte); \
+ if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \
+ pte_page(pte) == ZERO_PAGE(old_addr)) \
+ newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \
+ newpte; \
+})
extern void paging_init(void);
#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
#define pmd_page_kernel(pmd) pmd_val(pmd)
-#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+
+#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
+
static inline void set_pte(pte_t *ptep, pte_t pte)
{
ptep->pte_high = pte.pte_high;
ptep->pte_low = pte.pte_low;
//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
- if (pte_val(pte) & _PAGE_GLOBAL) {
+ if (pte.pte_low & _PAGE_GLOBAL) {
pte_t *buddy = ptep_buddy(ptep);
/*
* Make sure the buddy is global too (if it's !none,
* it better already be global)
*/
- if (pte_none(*buddy))
- buddy->pte_low |= _PAGE_GLOBAL;
+ if (pte_none(*buddy)) {
+ buddy->pte_low |= _PAGE_GLOBAL;
+ buddy->pte_high |= _PAGE_GLOBAL;
+ }
}
}
#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
+ pte_t null = __pte(0);
+
/* Preserve global status for the pair */
- if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
- set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
- else
- set_pte_at(mm, addr, ptep, __pte(0));
+ if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
+ null.pte_low = null.pte_high = _PAGE_GLOBAL;
+
+ set_pte_at(mm, addr, ptep, null);
}
#else
+
+#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+
/*
* Certain architectures need to do special things when pte's
* within a page table are directly modified. Thus, the following
*/
static inline int pte_user(pte_t pte) { BUG(); return 0; }
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
-static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_READ; }
-static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_WRITE; }
-static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_MODIFIED; }
-static inline int pte_young(pte_t pte) { return (pte).pte_low & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return (pte).pte_low & _PAGE_FILE; }
+static inline int pte_read(pte_t pte) { return pte.pte_low & _PAGE_READ; }
+static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; }
+
static inline pte_t pte_wrprotect(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
- (pte).pte_high &= ~_PAGE_SILENT_WRITE;
+ pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+ pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_rdprotect(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
- (pte).pte_high &= ~_PAGE_SILENT_READ;
+ pte.pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+ pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
static inline pte_t pte_mkclean(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
- (pte).pte_high &= ~_PAGE_SILENT_WRITE;
+ pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+ pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
- (pte).pte_high &= ~_PAGE_SILENT_READ;
+ pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+ pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
static inline pte_t pte_mkwrite(pte_t pte)
{
- (pte).pte_low |= _PAGE_WRITE;
- if ((pte).pte_low & _PAGE_MODIFIED) {
- (pte).pte_low |= _PAGE_SILENT_WRITE;
- (pte).pte_high |= _PAGE_SILENT_WRITE;
+ pte.pte_low |= _PAGE_WRITE;
+ if (pte.pte_low & _PAGE_MODIFIED) {
+ pte.pte_low |= _PAGE_SILENT_WRITE;
+ pte.pte_high |= _PAGE_SILENT_WRITE;
}
return pte;
}
static inline pte_t pte_mkread(pte_t pte)
{
- (pte).pte_low |= _PAGE_READ;
- if ((pte).pte_low & _PAGE_ACCESSED) {
- (pte).pte_low |= _PAGE_SILENT_READ;
- (pte).pte_high |= _PAGE_SILENT_READ;
+ pte.pte_low |= _PAGE_READ;
+ if (pte.pte_low & _PAGE_ACCESSED) {
+ pte.pte_low |= _PAGE_SILENT_READ;
+ pte.pte_high |= _PAGE_SILENT_READ;
}
return pte;
}
static inline pte_t pte_mkdirty(pte_t pte)
{
- (pte).pte_low |= _PAGE_MODIFIED;
- if ((pte).pte_low & _PAGE_WRITE) {
- (pte).pte_low |= _PAGE_SILENT_WRITE;
- (pte).pte_high |= _PAGE_SILENT_WRITE;
+ pte.pte_low |= _PAGE_MODIFIED;
+ if (pte.pte_low & _PAGE_WRITE) {
+ pte.pte_low |= _PAGE_SILENT_WRITE;
+ pte.pte_high |= _PAGE_SILENT_WRITE;
}
return pte;
}
static inline pte_t pte_mkyoung(pte_t pte)
{
- (pte).pte_low |= _PAGE_ACCESSED;
- if ((pte).pte_low & _PAGE_READ)
- (pte).pte_low |= _PAGE_SILENT_READ;
- (pte).pte_high |= _PAGE_SILENT_READ;
+ pte.pte_low |= _PAGE_ACCESSED;
+ if (pte.pte_low & _PAGE_READ)
+ pte.pte_low |= _PAGE_SILENT_READ;
+ pte.pte_high |= _PAGE_SILENT_READ;
return pte;
}
#else
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- pte.pte_low &= _PAGE_CHG_MASK;
- pte.pte_low |= pgprot_val(newprot);
+ pte.pte_low &= _PAGE_CHG_MASK;
+ pte.pte_high &= ~0x3f;
+ pte.pte_low |= pgprot_val(newprot);
pte.pte_high |= pgprot_val(newprot) & 0x3f;
return pte;
}
struct sigcontext {
unsigned long sc_regs[32];
unsigned long sc_fpregs[32];
- unsigned long sc_hi[4];
- unsigned long sc_lo[4];
+ unsigned long sc_mdhi;
+ unsigned long sc_hi1;
+ unsigned long sc_hi2;
+ unsigned long sc_hi3;
+ unsigned long sc_mdlo;
+ unsigned long sc_lo1;
+ unsigned long sc_lo2;
+ unsigned long sc_lo3;
unsigned long sc_pc;
unsigned int sc_fpc_csr;
unsigned int sc_used_math;
#define SMP_CALL_FUNCTION 0x2
extern cpumask_t phys_cpu_present_map;
-extern cpumask_t cpu_online_map;
#define cpu_possible_map phys_cpu_present_map
extern cpumask_t cpu_callout_map;
extern void plat_smp_setup(void);
/*
- * Called after init_IRQ but before __cpu_up.
+ * Called in smp_prepare_cpus.
*/
-extern void prom_prepare_cpus(unsigned int max_cpus);
+extern void plat_prepare_cpus(unsigned int max_cpus);
/*
* Last chance for the board code to finish SMP initialization before
--- /dev/null
+#ifndef _MIPS_SPARSEMEM_H
+#define _MIPS_SPARSEMEM_H
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SIZE_BITS 2^N: how big each section will be
+ * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS 28
+#define MAX_PHYSMEM_BITS 35
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _MIPS_SPARSEMEM_H */
+
#define __LC_KERNEL_ASCE 0xD58
#define __LC_USER_ASCE 0xD60
#define __LC_PANIC_STACK 0xD68
-#define __LC_CPUID 0xD90
-#define __LC_CPUADDR 0xD98
+#define __LC_CPUID 0xD80
+#define __LC_CPUADDR 0xD88
#define __LC_IPLDEV 0xDB8
#define __LC_JIFFY_TIMER 0xDC0
#define __LC_CURRENT 0xDD8
#define pte_clear(mm,addr,ptep) \
set_pte_at((mm), (addr), (ptep), __pte(0UL))
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr) \
+({ \
+ pte_t newpte = (pte); \
+ if (tlb_type != hypervisor && pte_present(pte)) { \
+ unsigned long this_pfn = pte_pfn(pte); \
+ \
+ if (pfn_valid(this_pfn) && \
+ (((old_addr) ^ (new_addr)) & (1 << 13))) \
+ flush_dcache_page_all(current->mm, \
+ pfn_to_page(this_pfn)); \
+ } \
+ newpte; \
+})
+#endif
+
extern pgd_t swapper_pg_dir[2048];
extern pmd_t swapper_low_pmd_dir[2048];
--- /dev/null
+#ifndef __UM_IRQFLAGS_H
+#define __UM_IRQFLAGS_H
+
+/* Empty for now */
+
+#endif
#define __get_user(x, ptr) \
({ \
- const __typeof__(ptr) __private_ptr = ptr; \
+ const __typeof__(*(ptr)) __user *__private_ptr = (ptr); \
__typeof__(x) __private_val; \
int __private_ret = -EFAULT; \
(x) = (__typeof__(*(__private_ptr)))0; \
- if (__copy_from_user((void *) &__private_val, (__private_ptr), \
+ if (__copy_from_user((__force void *)&__private_val, (__private_ptr),\
sizeof(*(__private_ptr))) == 0) { \
(x) = (__typeof__(*(__private_ptr))) __private_val; \
__private_ret = 0; \
#define __put_user(x, ptr) \
({ \
- __typeof__(ptr) __private_ptr = ptr; \
+ __typeof__(*(ptr)) __user *__private_ptr = ptr; \
__typeof__(*(__private_ptr)) __private_val; \
int __private_ret = -EFAULT; \
__private_val = (__typeof__(*(__private_ptr))) (x); \
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
/* 1GB for 64bit, 8MB for 32bit */
-#define STACK_RND_MASK (is_compat_task() ? 0x7ff : 0x3fffff)
+#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
#endif
#define KEY_SAVE 234
#define KEY_DOCUMENTS 235
+#define KEY_BATTERY 236
+
#define KEY_UNKNOWN 240
#define BTN_MISC 0x100
* Switch events
*/
-#define SW_0 0x00
-#define SW_1 0x01
-#define SW_2 0x02
-#define SW_3 0x03
-#define SW_4 0x04
-#define SW_5 0x05
-#define SW_6 0x06
-#define SW_7 0x07
+#define SW_LID 0x00 /* set = lid shut */
+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_MAX 0x0f
/*
struct m48t86_ops
{
- void (*writeb)(unsigned char value, unsigned long addr);
- unsigned char (*readb)(unsigned long addr);
+ void (*writebyte)(unsigned char value, unsigned long addr);
+ unsigned char (*readbyte)(unsigned long addr);
};
#include <linux/seqlock.h>
#include <linux/nodemask.h>
#include <asm/atomic.h>
+#include <asm/page.h>
/* Free memory management - zoned buddy allocator. */
#ifndef CONFIG_FORCE_MAX_ZONEORDER
#define PCI_DEVICE_ID_VIA_8380_0 0x0204
#define PCI_DEVICE_ID_VIA_3238_0 0x0238
#define PCI_DEVICE_ID_VIA_PT880 0x0258
+#define PCI_DEVICE_ID_VIA_PT880ULTRA 0x0308
#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259
#define PCI_DEVICE_ID_VIA_3269_0 0x0269
#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282
int vt_waitactive(int vt);
void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
-#ifdef CONFIG_VT
-int is_console_suspend_safe(void);
-#else
-static inline int is_console_suspend_safe(void) { return 1; }
-#endif
/*
* vc_screen.c shares this temporary buffer with the console write code so that
#include <linux/config.h>
+struct sock;
+
#if defined(CONFIG_COMPAT)
#include <linux/compat.h>
compat_int_t cmsg_type;
};
-struct sock;
extern int compat_sock_get_timestamp(struct sock *, struct timeval __user *);
#else /* defined(CONFIG_COMPAT) */
extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
extern int ieee80211_tx_frame(struct ieee80211_device *ieee,
- struct ieee80211_hdr *frame, int len);
+ struct ieee80211_hdr *frame, int hdr_len,
+ int total_len, int encrypt_mpdu);
/* ieee80211_rx.c */
extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
* - context set to the context data you want passed
* The return value is 0, or an error.
*/
-typedef void (*notify_function_ptr)(struct net_device *dev, void *context);
+typedef void (*notify_function_ptr)(struct net_device *dev, int event_type, void *context);
#define ieee80211softmac_notify(dev, event, fun, context) ieee80211softmac_notify_gfp(dev, event, fun, context, GFP_KERNEL);
#define ieee80211softmac_notify_atomic(dev, event, fun, context) ieee80211softmac_notify_gfp(dev, event, fun, context, GFP_ATOMIC);
return ret;
}
+EXPORT_SYMBOL_GPL(hrtimer_start);
/**
* hrtimer_try_to_cancel - try to deactivate a timer
return ret;
}
+EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
/**
* hrtimer_cancel - cancel a timer and wait for the handler to finish.
cpu_relax();
}
}
+EXPORT_SYMBOL_GPL(hrtimer_cancel);
/**
* hrtimer_get_remaining - get remaining time for the timer
return rem;
}
+EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
#ifdef CONFIG_NO_IDLE_HZ
/**
timer->base = &bases[clock_id];
timer->node.rb_parent = HRTIMER_INACTIVE;
}
+EXPORT_SYMBOL_GPL(hrtimer_init);
/**
* hrtimer_get_res - get the timer resolution for a clock
return 0;
}
+EXPORT_SYMBOL_GPL(hrtimer_get_res);
/*
* Expire the per base hrtimer-queue:
if (start_pfn < zone->zone_start_pfn)
zone->zone_start_pfn = start_pfn;
- if (end_pfn > old_zone_end_pfn)
- zone->spanned_pages = end_pfn - zone->zone_start_pfn;
+ zone->spanned_pages = max(old_zone_end_pfn, end_pfn) -
+ zone->zone_start_pfn;
zone_span_writeunlock(zone);
}
if (start_pfn < pgdat->node_start_pfn)
pgdat->node_start_pfn = start_pfn;
- if (end_pfn > old_pgdat_end_pfn)
- pgdat->node_spanned_pages = end_pfn - pgdat->node_start_pfn;
+ pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
+ pgdat->node_start_pfn;
}
int online_pages(unsigned long pfn, unsigned long nr_pages)
#define BUFCTL_ACTIVE (((kmem_bufctl_t)(~0U))-2)
#define SLAB_LIMIT (((kmem_bufctl_t)(~0U))-3)
-/* Max number of objs-per-slab for caches which use off-slab slabs.
- * Needed to avoid a possible looping condition in cache_grow().
- */
-static unsigned long offslab_limit;
-
/*
* struct slab
*
NULL, NULL);
}
- /* Inc off-slab bufctl limit until the ceiling is hit. */
- if (!(OFF_SLAB(sizes->cs_cachep))) {
- offslab_limit = sizes->cs_size - sizeof(struct slab);
- offslab_limit /= sizeof(kmem_bufctl_t);
- }
-
sizes->cs_dmacachep = kmem_cache_create(names->name_dma,
sizes->cs_size,
ARCH_KMALLOC_MINALIGN,
static size_t calculate_slab_order(struct kmem_cache *cachep,
size_t size, size_t align, unsigned long flags)
{
+ unsigned long offslab_limit;
size_t left_over = 0;
int gfporder;
if (!num)
continue;
- /* More than offslab_limit objects will cause problems */
- if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit)
- break;
+ if (flags & CFLGS_OFF_SLAB) {
+ /*
+ * Max number of objs-per-slab for caches which
+ * use off-slab slabs. Needed to avoid a possible
+ * looping condition in cache_grow().
+ */
+ offslab_limit = size - sizeof(struct slab);
+ offslab_limit /= sizeof(kmem_bufctl_t);
+
+ if (num > offslab_limit)
+ break;
+ }
/* Found something acceptable - save it away */
cachep->num = num;
rtnl_lock();
if (strchr(dev->name, '%')) {
ret = dev_alloc_name(dev, dev->name);
- if (ret < 0)
- goto err1;
+ if (ret < 0) {
+ free_netdev(dev);
+ goto out;
+ }
}
ret = register_netdevice(dev);
if (ret)
- goto err2;
+ goto out;
ret = br_sysfs_addbr(dev);
if (ret)
- goto err3;
- rtnl_unlock();
- return 0;
-
- err3:
- unregister_netdev(dev);
- err2:
- free_netdev(dev);
- err1:
+ unregister_netdevice(dev);
+ out:
rtnl_unlock();
return ret;
}
#
obj-y += eth.o
-obj-$(CONFIG_SYSCTL) += sysctl_net_ether.o
obj-$(subst m,y,$(CONFIG_IPX)) += pe2.o
obj-$(subst m,y,$(CONFIG_ATALK)) += pe2.o
+++ /dev/null
-/* -*- linux-c -*-
- * sysctl_net_ether.c: sysctl interface to net Ethernet subsystem.
- *
- * Begun April 1, 1996, Mike Shaver.
- * Added /proc/sys/net/ether directory entry (empty =) ). [MS]
- */
-
-#include <linux/mm.h>
-#include <linux/sysctl.h>
-#include <linux/if_ether.h>
-
-ctl_table ether_table[] = {
- {0}
-};
/* Incoming 802.11 strucure is converted to a TXB
* a block of 802.11 fragment packets (stored as skbs) */
int ieee80211_tx_frame(struct ieee80211_device *ieee,
- struct ieee80211_hdr *frame, int len)
+ struct ieee80211_hdr *frame, int hdr_len, int total_len,
+ int encrypt_mpdu)
{
struct ieee80211_txb *txb = NULL;
unsigned long flags;
spin_lock_irqsave(&ieee->lock, flags);
+ if (encrypt_mpdu && !ieee->sec.encrypt)
+ encrypt_mpdu = 0;
+
/* If there is no driver handler to take the TXB, dont' bother
* creating it... */
if (!ieee->hard_start_xmit) {
goto success;
}
- if (unlikely(len < 24)) {
+ if (unlikely(total_len < 24)) {
printk(KERN_WARNING "%s: skb too small (%d).\n",
- ieee->dev->name, len);
+ ieee->dev->name, total_len);
goto success;
}
+ if (encrypt_mpdu)
+ frame->frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+
/* When we allocate the TXB we allocate enough space for the reserve
* and full fragment bytes (bytes_per_frag doesn't include prefix,
* postfix, header, FCS, etc.) */
- txb = ieee80211_alloc_txb(1, len, ieee->tx_headroom, GFP_ATOMIC);
+ txb = ieee80211_alloc_txb(1, total_len, ieee->tx_headroom, GFP_ATOMIC);
if (unlikely(!txb)) {
printk(KERN_WARNING "%s: Could not allocate TXB\n",
ieee->dev->name);
goto failed;
}
txb->encrypted = 0;
- txb->payload_size = len;
+ txb->payload_size = total_len;
skb_frag = txb->fragments[0];
- memcpy(skb_put(skb_frag, len), frame, len);
+ memcpy(skb_put(skb_frag, total_len), frame, total_len);
if (ieee->config &
(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
skb_put(skb_frag, 4);
+ /* To avoid overcomplicating things, we do the corner-case frame
+ * encryption in software. The only real situation where encryption is
+ * needed here is during software-based shared key authentication. */
+ if (encrypt_mpdu)
+ ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
+
success:
spin_unlock_irqrestore(&ieee->lock, flags);
tristate "Software MAC add-on to the IEEE 802.11 networking stack"
depends on IEEE80211 && EXPERIMENTAL
select WIRELESS_EXT
+ select IEEE80211_CRYPT_WEP
---help---
This option enables the hardware independent software MAC addon
for the IEEE 802.11 networking stack.
}
static void
-ieee80211softmac_assoc_notify(struct net_device *dev, void *context)
+ieee80211softmac_assoc_notify_scan(struct net_device *dev, int event_type, void *context)
{
struct ieee80211softmac_device *mac = ieee80211_priv(dev);
ieee80211softmac_assoc_work((void*)mac);
}
+static void
+ieee80211softmac_assoc_notify_auth(struct net_device *dev, int event_type, void *context)
+{
+ struct ieee80211softmac_device *mac = ieee80211_priv(dev);
+
+ switch (event_type) {
+ case IEEE80211SOFTMAC_EVENT_AUTHENTICATED:
+ ieee80211softmac_assoc_work((void*)mac);
+ break;
+ case IEEE80211SOFTMAC_EVENT_AUTH_FAILED:
+ case IEEE80211SOFTMAC_EVENT_AUTH_TIMEOUT:
+ ieee80211softmac_disassoc(mac);
+ break;
+ }
+}
+
/* This function is called to handle userspace requests (asynchronously) */
void
ieee80211softmac_assoc_work(void *d)
* Maybe we can hope to have more memory after scanning finishes ;)
*/
dprintk(KERN_INFO PFX "Associate: Scanning for networks first.\n");
- ieee80211softmac_notify(mac->dev, IEEE80211SOFTMAC_EVENT_SCAN_FINISHED, ieee80211softmac_assoc_notify, NULL);
+ ieee80211softmac_notify(mac->dev, IEEE80211SOFTMAC_EVENT_SCAN_FINISHED, ieee80211softmac_assoc_notify_scan, NULL);
if (ieee80211softmac_start_scan(mac))
dprintk(KERN_INFO PFX "Associate: failed to initiate scan. Is device up?\n");
return;
* otherwise adding the notification would be racy. */
if (!ieee80211softmac_auth_req(mac, found)) {
dprintk(KERN_INFO PFX "cannot associate without being authenticated, requested authentication\n");
- ieee80211softmac_notify_internal(mac, IEEE80211SOFTMAC_EVENT_ANY, found, ieee80211softmac_assoc_notify, NULL, GFP_KERNEL);
+ ieee80211softmac_notify_internal(mac, IEEE80211SOFTMAC_EVENT_ANY, found, ieee80211softmac_assoc_notify_auth, NULL, GFP_KERNEL);
} else {
printkl(KERN_WARNING PFX "Not authenticated, but requesting authentication failed. Giving up to associate\n");
ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_ASSOCIATE_FAILED, found);
printkl(KERN_WARNING PFX "Authentication timed out with "MAC_FMT"\n", MAC_ARG(net->bssid));
/* Remove this item from the queue */
spin_lock_irqsave(&mac->lock, flags);
+ net->authenticating = 0;
ieee80211softmac_call_events_locked(mac, IEEE80211SOFTMAC_EVENT_AUTH_TIMEOUT, net);
cancel_delayed_work(&auth->work); /* just to make sure... */
list_del(&auth->list);
aq->state = IEEE80211SOFTMAC_AUTH_SHARED_RESPONSE;
spin_unlock_irqrestore(&mac->lock, flags);
- /* Switch to correct channel for this network */
- mac->set_channel(mac->dev, net->channel);
-
- /* Send our response (How to encrypt?) */
+ /* Send our response */
ieee80211softmac_send_mgt_frame(mac, aq->net, IEEE80211_STYPE_AUTH, aq->state);
- break;
+ return 0;
case IEEE80211SOFTMAC_AUTH_SHARED_PASS:
+ kfree(net->challenge);
+ net->challenge = NULL;
+ net->challenge_len = 0;
/* Check the status code of the response */
switch(auth->status) {
case WLAN_STATUS_SUCCESS:
spin_unlock_irqrestore(&mac->lock, flags);
printkl(KERN_NOTICE PFX "Shared Key Authentication completed with "MAC_FMT"\n",
MAC_ARG(net->bssid));
+ ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_AUTHENTICATED, net);
break;
default:
printkl(KERN_NOTICE PFX "Shared Key Authentication with "MAC_FMT" failed, error code: %i\n",
struct ieee80211softmac_event event = *(struct ieee80211softmac_event*) d;
kfree(d);
- event.fun(event.mac->dev, event.context);
+ event.fun(event.mac->dev, event.event_type, event.context);
}
int
if ((eventptr->event_type == event || eventptr->event_type == -1)
&& (eventptr->event_context == NULL || eventptr->event_context == event_ctx)) {
list_del(&eventptr->list);
+ /* User may have subscribed to ANY event, so
+ * we tell them which event triggered it. */
+ eventptr->event_type = event;
schedule_work(&eventptr->work);
}
}
* shouldn't the sequence number be in ieee80211? */
}
+static u16
+ieee80211softmac_capabilities(struct ieee80211softmac_device *mac,
+ struct ieee80211softmac_network *net)
+{
+ u16 capability = 0;
+
+ /* ESS and IBSS bits are set according to the current mode */
+ switch (mac->ieee->iw_mode) {
+ case IW_MODE_INFRA:
+ capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
+ break;
+ case IW_MODE_ADHOC:
+ capability = cpu_to_le16(WLAN_CAPABILITY_IBSS);
+ break;
+ case IW_MODE_AUTO:
+ capability = net->capabilities &
+ (WLAN_CAPABILITY_ESS|WLAN_CAPABILITY_IBSS);
+ break;
+ default:
+ /* bleh. we don't ever go to these modes */
+ printk(KERN_ERR PFX "invalid iw_mode!\n");
+ break;
+ }
+
+ /* CF Pollable / CF Poll Request */
+ /* Needs to be implemented, for now, the 0's == not supported */
+
+ /* Privacy Bit */
+ capability |= mac->ieee->sec.level ?
+ cpu_to_le16(WLAN_CAPABILITY_PRIVACY) : 0;
+
+ /* Short Preamble */
+ /* Always supported: we probably won't ever be powering devices which
+ * dont support this... */
+ capability |= WLAN_CAPABILITY_SHORT_PREAMBLE;
+
+ /* PBCC */
+ /* Not widely used */
+
+ /* Channel Agility */
+ /* Not widely used */
+
+ /* Short Slot */
+ /* Will be implemented later */
+
+ /* DSSS-OFDM */
+ /* Not widely used */
+
+ return capability;
+}
/*****************************************************************************
* Create Management packets
return 0;
ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_ASSOC_REQ, net->bssid, net->bssid);
- /* Fill in capability Info */
- switch (mac->ieee->iw_mode) {
- case IW_MODE_INFRA:
- (*pkt)->capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
- break;
- case IW_MODE_ADHOC:
- (*pkt)->capability = cpu_to_le16(WLAN_CAPABILITY_IBSS);
- break;
- case IW_MODE_AUTO:
- (*pkt)->capability = net->capabilities & (WLAN_CAPABILITY_ESS|WLAN_CAPABILITY_IBSS);
- break;
- default:
- /* bleh. we don't ever go to these modes */
- printk(KERN_ERR PFX "invalid iw_mode!\n");
- break;
- }
- /* Need to add this
- (*pkt)->capability |= mac->ieee->short_slot ?
- cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME) : 0;
- */
- (*pkt)->capability |= mac->ieee->sec.level ? cpu_to_le16(WLAN_CAPABILITY_PRIVACY) : 0;
/* Fill in Listen Interval (?) */
(*pkt)->listen_interval = cpu_to_le16(10);
return 0;
ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_REASSOC_REQ, net->bssid, net->bssid);
- /* Fill in capability Info */
- (*pkt)->capability = mac->ieee->iw_mode == IW_MODE_MASTER ?
- cpu_to_le16(WLAN_CAPABILITY_ESS) :
- cpu_to_le16(WLAN_CAPABILITY_IBSS);
- /*
- (*pkt)->capability |= mac->ieee->short_slot ?
- cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME) : 0;
- */
- (*pkt)->capability |= mac->ieee->sec.level ?
- cpu_to_le16(WLAN_CAPABILITY_PRIVACY) : 0;
-
+ /* Fill in the capabilities */
+ (*pkt)->capability = ieee80211softmac_capabilities(mac, net);
+
/* Fill in Listen Interval (?) */
(*pkt)->listen_interval = cpu_to_le16(10);
/* Fill in the current AP MAC */
static u32
ieee80211softmac_auth(struct ieee80211_auth **pkt,
struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net,
- u16 transaction, u16 status)
+ u16 transaction, u16 status, int *encrypt_mpdu)
{
u8 *data;
+ int auth_mode = mac->ieee->sec.auth_mode;
+ int is_shared_response = (auth_mode == WLAN_AUTH_SHARED_KEY
+ && transaction == IEEE80211SOFTMAC_AUTH_SHARED_RESPONSE);
+
/* Allocate Packet */
(*pkt) = (struct ieee80211_auth *)ieee80211softmac_alloc_mgt(
2 + /* Auth Algorithm */
2 + /* Auth Transaction Seq */
2 + /* Status Code */
/* Challenge Text IE */
- mac->ieee->open_wep ? 0 :
- 1 + 1 + WLAN_AUTH_CHALLENGE_LEN
- );
+ is_shared_response ? 0 : 1 + 1 + net->challenge_len
+ );
if (unlikely((*pkt) == NULL))
return 0;
ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_AUTH, net->bssid, net->bssid);
/* Algorithm */
- (*pkt)->algorithm = mac->ieee->open_wep ?
- cpu_to_le16(WLAN_AUTH_OPEN) :
- cpu_to_le16(WLAN_AUTH_SHARED_KEY);
+ (*pkt)->algorithm = cpu_to_le16(auth_mode);
/* Transaction */
(*pkt)->transaction = cpu_to_le16(transaction);
/* Status */
data = (u8 *)(*pkt)->info_element;
/* Challenge Text */
- if(!mac->ieee->open_wep){
+ if (is_shared_response) {
*data = MFIE_TYPE_CHALLENGE;
data++;
/* Copy the challenge in */
- // *data = challenge length
- // data += sizeof(u16);
- // memcpy(data, challenge, challenge length);
- // data += challenge length;
-
- /* Add the full size to the packet length */
- }
+ *data = net->challenge_len;
+ data++;
+ memcpy(data, net->challenge, net->challenge_len);
+ data += net->challenge_len;
+
+ /* Make sure this frame gets encrypted with the shared key */
+ *encrypt_mpdu = 1;
+ } else
+ *encrypt_mpdu = 0;
/* Return the packet size */
return (data - (u8 *)(*pkt));
{
void *pkt = NULL;
u32 pkt_size = 0;
+ int encrypt_mpdu = 0;
switch(type) {
case IEEE80211_STYPE_ASSOC_REQ:
pkt_size = ieee80211softmac_reassoc_req((struct ieee80211_reassoc_request **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg);
break;
case IEEE80211_STYPE_AUTH:
- pkt_size = ieee80211softmac_auth((struct ieee80211_auth **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg, (u16)(arg & 0xFFFF), (u16) (arg >> 16));
+ pkt_size = ieee80211softmac_auth((struct ieee80211_auth **)(&pkt), mac, (struct ieee80211softmac_network *)ptrarg, (u16)(arg & 0xFFFF), (u16) (arg >> 16), &encrypt_mpdu);
break;
case IEEE80211_STYPE_DISASSOC:
case IEEE80211_STYPE_DEAUTH:
* or get rid of it alltogether?
* Does this work for you now?
*/
- ieee80211_tx_frame(mac->ieee, (struct ieee80211_hdr *)pkt, pkt_size);
-
- kfree(pkt);
- return 0;
-}
-
-
-/* Create an rts/cts frame */
-static u32
-ieee80211softmac_rts_cts(struct ieee80211_hdr_2addr **pkt,
- struct ieee80211softmac_device *mac, struct ieee80211softmac_network *net,
- u32 type)
-{
- /* Allocate Packet */
- (*pkt) = kmalloc(IEEE80211_2ADDR_LEN, GFP_ATOMIC);
- memset(*pkt, 0, IEEE80211_2ADDR_LEN);
- if((*pkt) == NULL)
- return 0;
- ieee80211softmac_hdr_2addr(mac, (*pkt), type, net->bssid);
- return IEEE80211_2ADDR_LEN;
-}
-
-
-/* Sends a control packet */
-static int
-ieee80211softmac_send_ctl_frame(struct ieee80211softmac_device *mac,
- struct ieee80211softmac_network *net, u32 type, u32 arg)
-{
- void *pkt = NULL;
- u32 pkt_size = 0;
-
- switch(type) {
- case IEEE80211_STYPE_RTS:
- case IEEE80211_STYPE_CTS:
- pkt_size = ieee80211softmac_rts_cts((struct ieee80211_hdr_2addr **)(&pkt), mac, net, type);
- break;
- default:
- printkl(KERN_DEBUG PFX "Unsupported Control Frame type: %i\n", type);
- return -EINVAL;
- }
-
- if(pkt_size == 0)
- return -ENOMEM;
-
- /* Send the packet to the ieee80211 layer for tx */
- ieee80211_tx_frame(mac->ieee, (struct ieee80211_hdr *) pkt, pkt_size);
+ ieee80211_tx_frame(mac->ieee, (struct ieee80211_hdr *)pkt,
+ IEEE80211_3ADDR_LEN, pkt_size, encrypt_mpdu);
kfree(pkt);
return 0;
Documentation/modules.txt. If unsure, say `N'.
config IP_NF_H323
- tristate 'H.323 protocol support'
- depends on IP_NF_CONNTRACK
+ tristate 'H.323 protocol support (EXPERIMENTAL)'
+ depends on IP_NF_CONNTRACK && EXPERIMENTAL
help
H.323 is a VoIP signalling protocol from ITU-T. As one of the most
important VoIP protocols, it is widely used by voice hardware and
.tuple.dst.u.tcp.port;
sin.sin_addr.s_addr = ct->tuplehash[IP_CT_DIR_ORIGINAL]
.tuple.dst.ip;
+ memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
DEBUGP("%s but no session\n", pptp_msg_name[msg]);
break;
}
- if (info->sstate != PPTP_CALL_IN_REP
- && info->sstate != PPTP_CALL_IN_CONF) {
+ if (info->cstate != PPTP_CALL_IN_REP
+ && info->cstate != PPTP_CALL_IN_CONF) {
DEBUGP("%s but never sent IN_CALL_REPLY\n",
pptp_msg_name[msg]);
break;
.tuple.dst.u.tcp.port;
sin.sin_addr.s_addr = ct->tuplehash[IP_CT_DIR_ORIGINAL]
.tuple.dst.u3.ip;
+ memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
/* Do additive increase */
if (tp->snd_cwnd < tp->snd_cwnd_clamp) {
- tp->snd_cwnd_cnt += ca->ai;
+ /* cwnd = cwnd + a(w) / cwnd */
+ tp->snd_cwnd_cnt += ca->ai + 1;
if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
tp->snd_cwnd_cnt -= tp->snd_cwnd;
tp->snd_cwnd++;
* eventually). The difference is that pulled data not copied, but
* immediately discarded.
*/
-static unsigned char *__pskb_trim_head(struct sk_buff *skb, int len)
+static void __pskb_trim_head(struct sk_buff *skb, int len)
{
int i, k, eat;
skb->tail = skb->data;
skb->data_len -= len;
skb->len = skb->data_len;
- return skb->tail;
}
int tcp_trim_head(struct sock *sk, struct sk_buff *skb, u32 len)
pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
return -ENOMEM;
- if (len <= skb_headlen(skb)) {
+ /* If len == headlen, we avoid __skb_pull to preserve alignment. */
+ if (unlikely(len < skb_headlen(skb)))
__skb_pull(skb, len);
- } else {
- if (__pskb_trim_head(skb, len-skb_headlen(skb)) == NULL)
- return -ENOMEM;
- }
+ else
+ __pskb_trim_head(skb, len - skb_headlen(skb));
TCP_SKB_CB(skb)->seq += len;
skb->ip_summed = CHECKSUM_HW;
if (now) {
/* Send down empty frame to trigger speed change */
skb = dev_alloc_skb(0);
- irlap_queue_xmit(self, skb);
+ if (skb)
+ irlap_queue_xmit(self, skb);
}
}
.mode = 0555,
.child = core_table,
},
-#ifdef CONFIG_NET
- {
- .ctl_name = NET_ETHER,
- .procname = "ethernet",
- .mode = 0555,
- .child = ether_table,
- },
-#endif
#ifdef CONFIG_INET
{
.ctl_name = NET_IPV4,
/* Set up any superblocks initialized prior to the policy load. */
printk(KERN_INFO "SELinux: Setting up existing superblocks.\n");
+ spin_lock(&sb_lock);
spin_lock(&sb_security_lock);
next_sb:
if (!list_empty(&superblock_security_head)) {
struct superblock_security_struct,
list);
struct super_block *sb = sbsec->sb;
- spin_lock(&sb_lock);
sb->s_count++;
- spin_unlock(&sb_lock);
spin_unlock(&sb_security_lock);
+ spin_unlock(&sb_lock);
down_read(&sb->s_umount);
if (sb->s_root)
superblock_doinit(sb, NULL);
drop_super(sb);
+ spin_lock(&sb_lock);
spin_lock(&sb_security_lock);
list_del_init(&sbsec->list);
goto next_sb;
}
spin_unlock(&sb_security_lock);
+ spin_unlock(&sb_lock);
}
/* SELinux requires early initialization in order to label
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff