MIPS: Alchemy: Remove forced command line setting

It is not always used, even if it is available.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/893/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 56c541d..559d9b2 100644 (file)
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -125,7 +125,6 @@ void __init board_setup(void)
 {
        unsigned long bcsr1, bcsr2;
        u32 pin_func;
-       char *argptr;
 
        bcsr1 = DB1000_BCSR_PHYS_ADDR;
        bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
@@ -159,30 +158,6 @@ void __init board_setup(void)
        /* initialize board register space */
        bcsr_init(bcsr1, bcsr2);
 
-       argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-
-#ifdef CONFIG_FB_AU1100
-       argptr = strstr(argptr, "video=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               /* default panel */
-               /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-       }
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-       /* au1000 does not support vra, au1500 and au1100 do */
-       strcat(argptr, " au1000_audio=vra");
-       argptr = prom_getcmdline();
-#endif
-
        /* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))

diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 28b8bd2..b5311d8 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -47,19 +47,9 @@ void __init board_setup(void)
        u32 pin_func, static_cfg0;
        u32 sys_freqctrl, sys_clksrc;
        u32 prid = read_c0_prid();
-       char *argptr;
 
        sys_freqctrl = 0;
        sys_clksrc = 0;
-       argptr = prom_getcmdline();
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
 
        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
        au_writel(8, SYS_AUXPLL);

diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index e0bd855..c7b4caa 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -47,35 +47,10 @@ void board_reset(void)
 void __init board_setup(void)
 {
        volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
-       char *argptr;
 
        bcsr_init(DB1000_BCSR_PHYS_ADDR,
                  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 
-       argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-
-#ifdef CONFIG_FB_AU1100
-       argptr = strstr(argptr, "video=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               /* default panel */
-               /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-       }
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-       /* au1000 does not support vra, au1500 and au1100 do */
-       strcat(argptr, " au1000_audio=vra");
-       argptr = prom_getcmdline();
-#endif
-
        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
        au_writel(8, SYS_AUXPLL);
        alchemy_gpio1_input_enable();

diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 2cf59e7..3184063 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -56,24 +56,10 @@ void board_reset(void)
 
 void __init board_setup(void)
 {
-       char *argptr;
-
        printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
        bcsr_init(PB1200_BCSR_PHYS_ADDR,
                  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
 
-       argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-#ifdef CONFIG_FB_AU1200
-       strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-
 #if 0
        {
                u32 pin_func;

diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 3f0c92c..fa9770a 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -54,26 +54,10 @@ void __init board_setup(void)
 {
        u32 pin_func;
        u32 sys_freqctrl, sys_clksrc;
-       char *argptr;
 
        bcsr_init(DB1000_BCSR_PHYS_ADDR,
                  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 
-       argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-       /* au1000 does not support vra, au1500 and au1100 do */
-       strcat(argptr, " au1000_audio=vra");
-       argptr = prom_getcmdline();
-#endif
-
        sys_clksrc = sys_freqctrl = pin_func = 0;
        /* Set AUX clock to 12 MHz * 8 = 96 MHz */
        au_writel(8, SYS_AUXPLL);

diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index 0d060c3..1e8fb3d 100644 (file)
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -56,20 +56,10 @@ void board_reset(void)
 void __init board_setup(void)
 {
        u32 pin_func;
-       char *argptr;
 
        bcsr_init(PB1550_BCSR_PHYS_ADDR,
                  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
 
-       argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-
        alchemy_gpio2_enable();
 
        /*

diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index e2838c6..a9f0336 100644 (file)
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -67,16 +67,6 @@ static void mtx1_power_off(void)
 
 void __init board_setup(void)
 {
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       char *argptr;
-       argptr = prom_getcmdline();
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-
        alchemy_gpio2_enable();
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)

diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 7956afa..47b4292 100644 (file)
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -51,16 +51,6 @@ void __init board_setup(void)
 {
        u32 pin_func;
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       char *argptr;
-       argptr = prom_getcmdline();
-       argptr = strstr(argptr, "console=");
-       if (argptr == NULL) {
-               argptr = prom_getcmdline();
-               strcat(argptr, " console=ttyS0,115200");
-       }
-#endif
-
        pm_power_off = xxs1500_power_off;
        _machine_halt = xxs1500_power_off;
        _machine_restart = xxs1500_reset;