mmc: at91_mci: avoid timeouts

The at91 mci controller internal state machine seems to often crash. This can
be fixed by resetting the controller after each command for at91rm9200 and by
setting the MCI_BLKR register on at91sam926*.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index fce171c..e924211 100644 (file)
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -130,6 +130,43 @@ struct at91mci_host
        struct timer_list timer;
 };
 
+/*
+ * Reset the controller and restore most of the state
+ */
+static void at91_reset_host(struct at91mci_host *host)
+{
+       unsigned long flags;
+       u32 mr;
+       u32 sdcr;
+       u32 dtor;
+       u32 imr;
+
+       local_irq_save(flags);
+       imr = at91_mci_read(host, AT91_MCI_IMR);
+
+       at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+
+       /* save current state */
+       mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
+       sdcr = at91_mci_read(host, AT91_MCI_SDCR);
+       dtor = at91_mci_read(host, AT91_MCI_DTOR);
+
+       /* reset the controller */
+       at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
+
+       /* restore state */
+       at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
+       at91_mci_write(host, AT91_MCI_MR, mr);
+       at91_mci_write(host, AT91_MCI_SDCR, sdcr);
+       at91_mci_write(host, AT91_MCI_DTOR, dtor);
+       at91_mci_write(host, AT91_MCI_IER, imr);
+
+       /* make sure sdio interrupts will fire */
+       at91_mci_read(host, AT91_MCI_SR);
+
+       local_irq_restore(flags);
+}
+
 static void at91_timeout_timer(unsigned long data)
 {
        struct at91mci_host *host;
@@ -148,6 +185,7 @@ static void at91_timeout_timer(unsigned long data)
                                host->request->cmd->error = -ETIMEDOUT;
                }
 
+               at91_reset_host(host);
                mmc_request_done(host->mmc, host->request);
        }
 }
@@ -512,6 +550,11 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
                mr |= AT91_MCI_PDCMODE;
                at91_mci_write(host, AT91_MCI_MR, mr);
 
+               if (!cpu_is_at91rm9200())
+                       at91_mci_write(host, AT91_MCI_BLKR,
+                               AT91_MCI_BLKR_BCNT(blocks) |
+                               AT91_MCI_BLKR_BLKLEN(block_length));
+
                /*
                 * Disable the PDC controller
                 */
@@ -584,6 +627,11 @@ static void at91_mci_process_next(struct at91mci_host *host)
                at91_mci_send_command(host, host->request->stop);
        } else {
                del_timer(&host->timer);
+               /* the at91rm9200 mci controller hangs after some transfers,
+                * and the workaround is to reset it after each transfer.
+                */
+               if (cpu_is_at91rm9200())
+                       at91_reset_host(host);
                mmc_request_done(host->mmc, host->request);
        }
 }

diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
index 1551fc2..400ec10 100644 (file)
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -75,6 +75,10 @@
 #define                        AT91_MCI_TRTYP_MULTIPLE (1 << 19)
 #define                        AT91_MCI_TRTYP_STREAM   (2 << 19)
 
+#define AT91_MCI_BLKR          0x18            /* Block Register */
+#define                AT91_MCI_BLKR_BCNT(n)   ((0xffff & (n)) << 0)   /* Block count */
+#define                AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16)  /* Block lenght */
+
 #define AT91_MCI_RSPR(n)       (0x20 + ((n) * 4))      /* Response Registers 0-3 */
 #define AT91_MCR_RDR           0x30            /* Receive Data Register */
 #define AT91_MCR_TDR           0x34            /* Transmit Data Register */