ASoC: SDP3430: Add support for EXTMUTE using TWL GPIO6

Board sdp3430 has hardware support for EXTMUTE using TWL4030 GPIO6
line, controlled by register INTBR_PMBR1. Machine driver takes care
of enabling gpio line through i2c and codec driver manipulates the
line during headset ramp up/down sequence.

Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index c51594d..f7e5b74 100644 (file)
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -24,6 +24,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
@@ -39,6 +40,9 @@
 #include "omap-pcm.h"
 #include "../codecs/twl4030.h"
 
+#define TWL4030_INTBR_PMBR1    0x0D
+#define EXTMUTE(value)         (value << 2)
+
 static struct snd_soc_card snd_soc_sdp3430;
 
 static int sdp3430_hw_params(struct snd_pcm_substream *substream,
@@ -280,6 +284,7 @@ static struct snd_soc_card snd_soc_sdp3430 = {
 static struct twl4030_setup_data twl4030_setup = {
        .ramp_delay_value = 3,
        .sysclk = 26000,
+       .hs_extmute = 1,
 };
 
 /* Audio subsystem */
@@ -312,6 +317,10 @@ static int __init sdp3430_soc_init(void)
        *(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
        *(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
 
+       /* Set TWL4030 GPIO6 as EXTMUTE signal */
+       twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, EXTMUTE(0x02),
+                                                       TWL4030_MODULE_INTBR);
+
        ret = platform_device_add(sdp3430_snd_device);
        if (ret)
                goto err1;