ACPI: thermal: create "thermal.crt=C" bootparam
authorLen Brown <len.brown@intel.com>
Tue, 14 Aug 2007 19:49:32 +0000 (15:49 -0400)
committerLen Brown <len.brown@intel.com>
Tue, 14 Aug 2007 19:49:32 +0000 (15:49 -0400)
Some hardware will malfunction at a temperature below
the BIOS provided critical shutdown threshold.

This hook allows moving the critical trip points down
to a temperature which provokes a graceful shutdown
before the hardware malfunction.

http://bugzilla.kernel.org/show_bug.cgi?id=8884

WARNING: A trip-point override will not get noticed
until the system delivers a temperature change event,
or unless thermal zone polling is enabled.
eg. "thermal.tzp=10"

Signed-off-by: Len Brown <len.brown@intel.com>
Documentation/kernel-parameters.txt
drivers/acpi/thermal.c

index 975f029..18dcfdd 100644 (file)
@@ -1826,6 +1826,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        -1: disable all active trip points in all thermal zones
                        <degrees C>: override all lowest active trip points
 
+       thermal.crt=    [HW,ACPI]
+                       -1: disable all critical trip points in all thermal zones
+                       <degrees C>: lower all critical trip points
+
        thermal.nocrt=  [HW,ACPI]
                        Set to disable actions on ACPI thermal zone
                        critical and hot trip points.
index 9b31f36..4c420fe 100644 (file)
@@ -79,6 +79,10 @@ static int act;
 module_param(act, int, 0644);
 MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
 
+static int crt;
+module_param(crt, int, 0644);
+MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
+
 static int tzp;
 module_param(tzp, int, 0444);
 MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
@@ -340,6 +344,20 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
                                  tz->trips.critical.temperature));
        }
 
+       if (tz->trips.critical.flags.valid == 1) {
+               if (crt == -1) {
+                       tz->trips.critical.flags.valid = 0;
+               } else if (crt > 0) {
+                       unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
+
+                       /*
+                        * Allow override to lower critical threshold
+                        */
+                       if (crt_k < tz->trips.critical.temperature)
+                               tz->trips.critical.temperature = crt_k;
+               }
+       }
+
        /* Critical Sleep (optional) */
 
        status =