[PATCH] ARM: 2744/1: ixp2000 gpio irq support

Patch from Lennert Buytenhek

This patch cleans up the ixp2000 gpio irq code and implements the
set_irq_type method for gpio irqs so that users can select for which
events (falling edge/rising edge/level low/level high) on the gpio
pin they want the corresponding gpio irq to be triggered.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index fc05555..0ee34ac 100644 (file)
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -40,6 +40,8 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
+#include <asm/arch/gpio.h>
+
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
 
@@ -179,7 +181,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
        /* clear timer 1 */
        ixp2000_reg_write(IXP2000_T1_CLR, 1);
-       
+
        while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
                timer_tick(regs);
                next_jiffy_time -= ticks_per_jiffy;
@@ -238,35 +240,40 @@ void __init ixp2000_init_time(unsigned long tick_rate)
 /*************************************************************************
  * GPIO helpers
  *************************************************************************/
-static unsigned long GPIO_IRQ_rising_edge;
 static unsigned long GPIO_IRQ_falling_edge;
+static unsigned long GPIO_IRQ_rising_edge;
 static unsigned long GPIO_IRQ_level_low;
 static unsigned long GPIO_IRQ_level_high;
 
-void gpio_line_config(int line, int style)
+static void update_gpio_int_csrs(void)
+{
+       ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
+       ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
+       ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
+       ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
+}
+
+void gpio_line_config(int line, int direction)
 {
        unsigned long flags;
 
        local_irq_save(flags);
+       if (direction == GPIO_OUT) {
+               irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
 
-       if(style == GPIO_OUT) {
                /* if it's an output, it ain't an interrupt anymore */
-               ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line));
                GPIO_IRQ_falling_edge &= ~(1 << line);
                GPIO_IRQ_rising_edge &= ~(1 << line);
                GPIO_IRQ_level_low &= ~(1 << line);
                GPIO_IRQ_level_high &= ~(1 << line);
-               ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
-               ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
-               ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
-               ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-               irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0;
-       } else if(style == GPIO_IN) {
-               ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line));
+               update_gpio_int_csrs();
+
+               ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
+       } else if (direction == GPIO_IN) {
+               ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
        }
-               
        local_irq_restore(flags);
-}      
+}
 
 
 /*************************************************************************
@@ -285,9 +292,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str
        }
 }
 
+static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
+{
+       int line = irq - IRQ_IXP2000_GPIO0;
+
+       /*
+        * First, configure this GPIO line as an input.
+        */
+       ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
+
+       /*
+        * Then, set the proper trigger type.
+        */
+       if (type & IRQT_FALLING)
+               GPIO_IRQ_falling_edge |= 1 << line;
+       else
+               GPIO_IRQ_falling_edge &= ~(1 << line);
+       if (type & IRQT_RISING)
+               GPIO_IRQ_rising_edge |= 1 << line;
+       else
+               GPIO_IRQ_rising_edge &= ~(1 << line);
+       if (type & IRQT_LOW)
+               GPIO_IRQ_level_low |= 1 << line;
+       else
+               GPIO_IRQ_level_low &= ~(1 << line);
+       if (type & IRQT_HIGH)
+               GPIO_IRQ_level_high |= 1 << line;
+       else
+               GPIO_IRQ_level_high &= ~(1 << line);
+       update_gpio_int_csrs();
+
+       /*
+        * Finally, mark the corresponding IRQ as valid.
+        */
+       irq_desc[irq].valid = 1;
+
+       return 0;
+}
+
 static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
 {
        ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+
+       ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+       ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
        ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
 }
 
@@ -302,6 +350,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq)
 }
 
 static struct irqchip ixp2000_GPIO_irq_chip = {
+       .type   = ixp2000_GPIO_irq_type,
        .ack    = ixp2000_GPIO_irq_mask_ack,
        .mask   = ixp2000_GPIO_irq_mask,
        .unmask = ixp2000_GPIO_irq_unmask
@@ -338,7 +387,7 @@ static void ixp2000_irq_mask(unsigned int irq)
 
 static void ixp2000_irq_unmask(unsigned int irq)
 {
-       ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET,  (1 << irq));
+       ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
 }
 
 static struct irqchip ixp2000_irq_chip = {
@@ -375,16 +424,16 @@ void __init ixp2000_init_irq(void)
         * our mask/unmask code much simpler.
         */
        for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
-               if((1 << irq) & IXP2000_VALID_IRQ_MASK) {
+               if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
                        set_irq_chip(irq, &ixp2000_irq_chip);
                        set_irq_handler(irq, do_level_IRQ);
                        set_irq_flags(irq, IRQF_VALID);
                } else set_irq_flags(irq, 0);
        }
-       
+
        /*
         * GPIO IRQs are invalid until someone sets the interrupt mode
-        * by calling gpio_line_set();
+        * by calling set_irq_type().
         */
        for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
                set_irq_chip(irq, &ixp2000_GPIO_irq_chip);

diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index ec943ca..1956af3 100644 (file)
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,7 +33,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/hardware.h>      /* Pick up IXP42000-specific bits */
+#include <asm/hardware.h>      /* Pick up IXP2000-specific bits */
+#include <asm/arch/gpio.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {

diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
index 84634af..03cbbe1 100644 (file)
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ b/include/asm-arm/arch-ixp2000/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixp2000-gpio.h
+ * include/asm-arm/arch-ixp2000/gpio.h
  *
  * Copyright (C) 2002 Intel Corporation.
  *
@@ -16,26 +16,18 @@
  * Use this instead of directly setting the GPIO registers.
  * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
  */
-#ifndef _ASM_ARCH_IXP2000_GPIO_H_
-#define _ASM_ARCH_IXP2000_GPIO_H_
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
 
 #ifndef __ASSEMBLY__
-#define GPIO_OUT                       0x0
-#define GPIO_IN                                0x80
+
+#define GPIO_IN                                0
+#define GPIO_OUT                       1
 
 #define IXP2000_GPIO_LOW               0
 #define IXP2000_GPIO_HIGH              1
 
-#define GPIO_NO_EDGES                  0
-#define GPIO_FALLING_EDGE              1
-#define GPIO_RISING_EDGE               2
-#define GPIO_BOTH_EDGES                3
-#define GPIO_LEVEL_LOW                 4
-#define GPIO_LEVEL_HIGH                8
-
-extern void set_GPIO_IRQ_edge(int gpio_nr, int edge);
-extern void set_GPIO_IRQ_level(int gpio_nr, int level);
-extern void gpio_line_config(int line, int style);
+extern void gpio_line_config(int line, int direction);
 
 static inline int gpio_line_get(int line)
 {
@@ -45,11 +37,12 @@ static inline int gpio_line_get(int line)
 static inline void gpio_line_set(int line, int value)
 {
        if (value == IXP2000_GPIO_HIGH) {
-               ixp_reg_write(IXP2000_GPIO_POSR, BIT(line));
-       } else if (value == IXP2000_GPIO_LOW)
-               ixp_reg_write(IXP2000_GPIO_POCR, BIT(line));
+               ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+       } else if (value == IXP2000_GPIO_LOW) {
+               ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+       }
 }
 
 #endif /* !__ASSEMBLY__ */
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
 
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */

diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
index 901bba6..52ded51 100644 (file)
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -138,30 +138,10 @@ struct ixp2000_flash_data {
        unsigned long (*bank_setup)(unsigned long);
 };
 
-/*
- * GPIO helper functions
- */
-#define        GPIO_IN         0
-#define        GPIO_OUT        1
-
-extern void gpio_line_config(int line, int style);
-
-static inline int gpio_line_get(int line)
-{
-       return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-       if (value) 
-               ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line));
-       else 
-               ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line));
-}
-
 struct ixp2000_i2c_pins {
        unsigned long sda_pin;
        unsigned long scl_pin;
 };
 
+
 #endif /*  !__ASSEMBLY__ */