V4L/DVB (7625): au0828: Cleanup

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index cbcc6f8..eafdc55 100644 (file)
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -22,12 +22,6 @@
 #include "au0828.h"
 #include "au0828-cards.h"
 
-#define _dbg(level, fmt, arg...)\
-       do {\
-               if (debug >= level) \
-                       printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\
-       } while (0)
-
 struct au0828_board au0828_boards[] = {
        [AU0828_BOARD_UNKNOWN] = {
                .name   = "Unknown board",
@@ -51,6 +45,8 @@ int au0828_tuner_callback(void *priv, int command, int arg)
 {
        struct au0828_dev *dev = priv;
 
+       dprintk(1, "%s()\n", __FUNCTION__);
+
        switch(dev->board) {
        case AU0828_BOARD_HAUPPAUGE_HVR850:
        case AU0828_BOARD_HAUPPAUGE_HVR950Q:
@@ -97,9 +93,10 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
 
 void au0828_card_setup(struct au0828_dev *dev)
 {
-
        static u8 eeprom[256];
 
+       dprintk(1, "%s()\n", __FUNCTION__);
+
        if (dev->i2c_rc == 0) {
                dev->i2c_client.addr = 0xa0 >> 1;
                tveeprom_read(&dev->i2c_client, eeprom, sizeof(eeprom));
@@ -121,6 +118,8 @@ void au0828_card_setup(struct au0828_dev *dev)
  */
 void au0828_gpio_setup(struct au0828_dev *dev)
 {
+       dprintk(1, "%s()\n", __FUNCTION__);
+
        switch(dev->board) {
        case AU0828_BOARD_HAUPPAUGE_HVR850:
        case AU0828_BOARD_HAUPPAUGE_HVR950Q:

diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index a3410fc..76801d1 100644 (file)
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -26,25 +26,23 @@
 
 #include "au0828.h"
 
-static unsigned int debug;
+/*
+ * 1 = General debug messages
+ * 2 = USB handling
+ * 4 = I2C related
+ * 8 = Bridge related
+ */
+unsigned int debug = 0;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
 
-#define _err(fmt, arg...)\
-       do {\
-               printk(KERN_ERR DRIVER_NAME "/0: " fmt, ## arg);\
-       } while (0)
-
-#define _info(fmt, arg...)\
-       do {\
-               printk(KERN_INFO DRIVER_NAME "/0: " fmt, ## arg);\
-       } while (0)
+unsigned int usb_debug = 0;
+module_param(usb_debug, int, 0644);
+MODULE_PARM_DESC(usb_debug, "enable usb debug messages");
 
-#define _dbg(level, fmt, arg...)\
-       do {\
-               if (debug >= level) \
-                       printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\
-       } while (0)
+unsigned int bridge_debug = 0;
+module_param(bridge_debug, int, 0644);
+MODULE_PARM_DESC(bridge_debug, "enable bridge debug messages");
 
 #define _AU0828_BULKPIPE 0x03
 #define _BULKPIPESIZE 0xffff
@@ -61,13 +59,13 @@ static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
 u32 au0828_readreg(struct au0828_dev *dev, u16 reg)
 {
        recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, dev->ctrlmsg, 1);
-       _dbg(3,"%s(0x%x) = 0x%x\n", __FUNCTION__, reg, dev->ctrlmsg[0]);
+       dprintk(8, "%s(0x%x) = 0x%x\n", __FUNCTION__, reg, dev->ctrlmsg[0]);
        return dev->ctrlmsg[0];
 }
 
 u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val)
 {
-       _dbg(3,"%s(0x%x, 0x%x)\n", __FUNCTION__, reg, val);
+       dprintk(8, "%s(0x%x, 0x%x)\n", __FUNCTION__, reg, val);
        return send_control_msg(dev, CMD_REQUEST_OUT, val, reg, dev->ctrlmsg, 0);
 }
 
@@ -76,7 +74,7 @@ static void cmd_msg_dump(struct au0828_dev *dev)
        int i;
 
        for (i = 0;i < sizeof(dev->ctrlmsg); i+=16)
-               _dbg(1,"%s() %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x "
+               dprintk(2,"%s() %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x "
                        "%02x %02x %02x %02x %02x %02x\n",
                        __FUNCTION__,
                        dev->ctrlmsg[i+0], dev->ctrlmsg[i+1],
@@ -107,7 +105,7 @@ static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value,
                status = min(status, 0);
 
                if (status < 0) {
-                       _err("%s() Failed sending control message, error %d.\n",
+                       printk(KERN_ERR "%s() Failed sending control message, error %d.\n",
                                __FUNCTION__,
                                status);
                }
@@ -137,13 +135,12 @@ static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
                status = min(status, 0);
 
                if (status < 0) {
-                       _err("%s() Failed receiving ctrl msg, error %d.\n",
+                       printk(KERN_ERR "%s() Failed receiving control message, error %d.\n",
                                __FUNCTION__,
                                status);
                }
                else
-                       if (debug > 4)
-                               cmd_msg_dump(dev);
+                       cmd_msg_dump(dev);
        }
        mutex_unlock(&dev->mutex);
        return status;
@@ -152,7 +149,7 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
 {
        struct au0828_dev *dev = usb_get_intfdata(interface);
 
-       _dbg(1,"%s()\n", __FUNCTION__);
+       dprintk(1,"%s()\n", __FUNCTION__);
 
        /* Digital TV */
        au0828_dvb_unregister(dev);
@@ -182,7 +179,7 @@ static int au0828_usb_probe (struct usb_interface *interface,
        if (ifnum != 0)
                return -ENODEV;
 
-       _dbg(1,"%s() vendor id 0x%x device id 0x%x ifnum:%d\n",
+       dprintk(1,"%s() vendor id 0x%x device id 0x%x ifnum:%d\n",
                __FUNCTION__,
                le16_to_cpu(usbdev->descriptor.idVendor),
                le16_to_cpu(usbdev->descriptor.idProduct),
@@ -190,7 +187,7 @@ static int au0828_usb_probe (struct usb_interface *interface,
 
        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
        if (dev == NULL) {
-               _err("Unable to allocate memory\n");
+               printk(KERN_ERR "%s() Unable to allocate memory\n", __FUNCTION__);
                return -ENOMEM;
        }
 
@@ -216,7 +213,7 @@ static int au0828_usb_probe (struct usb_interface *interface,
        /* Digital TV */
        au0828_dvb_register(dev);
 
-       _info("Registered device AU0828 [%s]\n",
+       printk(KERN_INFO "Registered device AU0828 [%s]\n",
                au0828_boards[dev->board].name == NULL ? "Unset" :
                au0828_boards[dev->board].name);
 
@@ -234,11 +231,29 @@ static int __init au0828_init(void)
 {
        int ret;
 
-       _info("au0828 driver loaded\n");
+       if(debug)
+               printk(KERN_INFO "%s() Debugging is enabled\n", __FUNCTION__);
+
+       if(usb_debug) {
+               printk(KERN_INFO "%s() USB Debugging is enabled\n", __FUNCTION__);
+               debug |= 2;
+       }
+
+       if(i2c_debug) {
+               printk(KERN_INFO "%s() I2C Debugging is enabled\n", __FUNCTION__);
+               debug |= 4;
+       }
+
+       if(bridge_debug) {
+               printk(KERN_INFO "%s() Bridge Debugging is enabled\n", __FUNCTION__);
+               debug |= 8;
+       }
+
+       printk(KERN_INFO "au0828 driver loaded\n");
 
        ret = usb_register(&au0828_usb_driver);
        if (ret)
-               _err("usb_register failed, error = %d\n", ret);
+               printk(KERN_ERR "usb_register failed, error = %d\n", ret);
 
        return ret;
 }

diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index ecc08a8..453fb3e 100644 (file)
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -26,19 +26,11 @@
 #include <media/v4l2-common.h>
 
 #include "au0828.h"
-
 #include "au8522.h"
 #include "xc5000.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-unsigned int dvb_debug = 1;
-
-#define _dbg(level, fmt, arg...)\
-       do { if (dvb_debug >= level)\
-               printk(KERN_DEBUG "%s/0: " fmt, DRIVER_NAME, ## arg);\
-       } while (0)
-
 static struct au8522_config hauppauge_hvr950q_config = {
        .demod_address = 0x8e >> 1,
        .status_mode   = AU8522_DEMODLOCKING,
@@ -57,6 +49,8 @@ static void urb_completion(struct urb *purb)
        struct au0828_dev *dev = purb->context;
        int ptype = usb_pipetype(purb->pipe);
 
+       dprintk(2, "%s()\n", __FUNCTION__);
+
        if (!dev)
                return;
 
@@ -84,7 +78,7 @@ static int stop_urb_transfer(struct au0828_dev *dev)
 {
        int i;
 
-       printk(KERN_INFO "%s()\n", __FUNCTION__);
+       dprintk(2, "%s()\n", __FUNCTION__);
 
        /* FIXME:  Do we need to free the transfer_buffers? */
        for (i = 0; i < URB_COUNT; i++) {
@@ -105,15 +99,11 @@ static int start_urb_transfer(struct au0828_dev *dev)
 {
        struct urb *purb;
        int i, ret = -ENOMEM;
-       unsigned int pipe = usb_rcvbulkpipe(dev->usbdev, _AU0828_BULKPIPE);
-       int pipesize = usb_maxpacket(dev->usbdev, pipe, usb_pipeout(pipe));
-       int packets = _BULKPIPESIZE / pipesize;
-       int transfer_buflen = packets * pipesize;
 
-       printk(KERN_INFO "%s() transfer_buflen = %d\n", __FUNCTION__, transfer_buflen);
+       dprintk(2, "%s()\n", __FUNCTION__);
 
        if (dev->urb_streaming) {
-               printk("%s: iso xfer already running!\n", __FUNCTION__);
+               dprintk(2, "%s: iso xfer already running!\n", __FUNCTION__);
                return 0;
        }
 
@@ -167,17 +157,15 @@ static int au0828_dvb_start_feed(struct dvb_demux_feed *feed)
        struct au0828_dvb *dvb = &dev->dvb;
        int ret = 0;
 
-       printk(KERN_INFO "%s() pid = 0x%x index = %d\n", __FUNCTION__, feed->pid, feed->index);
+       dprintk(1, "%s()\n", __FUNCTION__);
 
        if (!demux->dmx.frontend)
                return -EINVAL;
 
-       printk(KERN_INFO "%s() Preparing, feeding = %d\n", __FUNCTION__, dvb->feeding);
        if (dvb) {
                mutex_lock(&dvb->lock);
                if (dvb->feeding++ == 0) {
-                       printk(KERN_INFO "%s() Starting Transport DMA\n",
-                               __FUNCTION__);
+                       /* Start transport */
                        au0828_write(dev, 0x608, 0x90);
                        au0828_write(dev, 0x609, 0x72);
                        au0828_write(dev, 0x60a, 0x71);
@@ -197,13 +185,12 @@ static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed)
        struct au0828_dvb *dvb = &dev->dvb;
        int ret = 0;
 
-       printk(KERN_INFO "%s() pid = 0x%x index = %d\n", __FUNCTION__, feed->pid, feed->index);
+       dprintk(1, "%s()\n", __FUNCTION__);
 
        if (dvb) {
                mutex_lock(&dvb->lock);
                if (--dvb->feeding == 0) {
-                       printk(KERN_INFO "%s() Stopping Transport DMA\n",
-                               __FUNCTION__);
+                       /* Stop transport */
                        au0828_write(dev, 0x608, 0x00);
                        au0828_write(dev, 0x609, 0x00);
                        au0828_write(dev, 0x60a, 0x00);
@@ -221,11 +208,13 @@ int dvb_register(struct au0828_dev *dev)
        struct au0828_dvb *dvb = &dev->dvb;
        int result;
 
+       dprintk(1, "%s()\n", __FUNCTION__);
+
        /* register adapter */
        result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
                                      &dev->usbdev->dev, adapter_nr);
        if (result < 0) {
-               printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n",
+               printk(KERN_ERROR "%s: dvb_register_adapter failed (errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_adapter;
        }
@@ -234,7 +223,7 @@ int dvb_register(struct au0828_dev *dev)
        /* register frontend */
        result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
        if (result < 0) {
-               printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
+               printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_frontend;
        }
@@ -250,7 +239,7 @@ int dvb_register(struct au0828_dev *dev)
        dvb->demux.stop_feed  = au0828_dvb_stop_feed;
        result = dvb_dmx_init(&dvb->demux);
        if (result < 0) {
-               printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
+               printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_dmx;
        }
@@ -260,7 +249,7 @@ int dvb_register(struct au0828_dev *dev)
        dvb->dmxdev.capabilities = 0;
        result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
        if (result < 0) {
-               printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
+               printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_dmxdev;
        }
@@ -268,7 +257,7 @@ int dvb_register(struct au0828_dev *dev)
        dvb->fe_hw.source = DMX_FRONTEND_0;
        result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
        if (result < 0) {
-               printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
+               printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_fe_hw;
        }
@@ -276,14 +265,14 @@ int dvb_register(struct au0828_dev *dev)
        dvb->fe_mem.source = DMX_MEMORY_FE;
        result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
        if (result < 0) {
-               printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
+               printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_fe_mem;
        }
 
        result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
        if (result < 0) {
-               printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n",
+               printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n",
                       DRIVER_NAME, result);
                goto fail_fe_conn;
        }
@@ -313,6 +302,8 @@ void au0828_dvb_unregister(struct au0828_dev *dev)
 {
        struct au0828_dvb *dvb = &dev->dvb;
 
+       dprintk(1, "%s()\n", __FUNCTION__);
+
        if(dvb->frontend == NULL)
                return;
 
@@ -335,6 +326,8 @@ int au0828_dvb_register(struct au0828_dev *dev)
        struct au0828_dvb *dvb = &dev->dvb;
        int ret;
 
+       dprintk(1, "%s()\n", __FUNCTION__);
+
        /* init frontend */
        switch (dev->board) {
        case AU0828_BOARD_HAUPPAUGE_HVR850:
@@ -355,7 +348,7 @@ int au0828_dvb_register(struct au0828_dev *dev)
                break;
        }
        if (NULL == dvb->frontend) {
-               printk("Frontend initialization failed\n");
+               printk(KERN_ERR "%s() Frontend initialization failed\n", __FUNCTION__);
                return -1;
        }
 

diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c
index 3e74824..4545a9c 100644 (file)
--- a/drivers/media/video/au0828/au0828-i2c.c
+++ b/drivers/media/video/au0828/au0828-i2c.c
@@ -29,19 +29,14 @@
 
 #include <media/v4l2-common.h>
 
-static unsigned int i2c_debug;
-module_param(i2c_debug, int, 0644);
+unsigned int i2c_debug = 0;
+module_param(i2c_debug, int, 0444);
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
-static unsigned int i2c_scan = 0;
+unsigned int i2c_scan = 0;
 module_param(i2c_scan, int, 0444);
 MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
 
-#define dprintk(level, fmt, arg...)\
-       do { if (i2c_debug >= level)\
-               printk(KERN_DEBUG "%s/0: " fmt, DRIVER_NAME, ## arg);\
-       } while (0)
-
 #define I2C_WAIT_DELAY 512
 #define I2C_WAIT_RETRY 64
 
@@ -146,7 +141,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
        int i, strobe = 0;
        struct au0828_dev *dev = i2c_adap->algo_data;
 
-       dprintk(1, "%s()\n", __FUNCTION__);
+       dprintk(4, "%s()\n", __FUNCTION__);
 
        au0828_write(dev, REG_2FF, 0x01);
        au0828_write(dev, REG_202, 0x07);
@@ -154,13 +149,11 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
        /* Hardware needs 8 bit addresses */
        au0828_write(dev, REG_203, msg->addr << 1);
 
-       if (i2c_debug)
-               dprintk(1, "SEND: %02x\n", msg->addr);
+       dprintk(4, "SEND: %02x\n", msg->addr);
 
        for (i=0; i < msg->len;) {
 
-               if (i2c_debug)
-                       dprintk(1, " %02x\n", msg->buf[i]);
+               dprintk(4, " %02x\n", msg->buf[i]);
 
                au0828_write(dev, REG_205, msg->buf[i]);
 
@@ -187,8 +180,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
        if (!i2c_wait_done(i2c_adap))
                return -EIO;
 
-       if (i2c_debug)
-               dprintk(1, "\n");
+       dprintk(4, "\n");
 
        return msg->len;
 }
@@ -200,7 +192,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
        struct au0828_dev *dev = i2c_adap->algo_data;
        int i;
 
-       dprintk(1, "%s()\n", __FUNCTION__);
+       dprintk(4, "%s()\n", __FUNCTION__);
 
        au0828_write(dev, REG_2FF, 0x01);
        au0828_write(dev, REG_202, 0x07);
@@ -208,8 +200,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
        /* Hardware needs 8 bit addresses */
        au0828_write(dev, REG_203, msg->addr << 1);
 
-       if (i2c_debug)
-               dprintk(1, " RECV:\n");
+       dprintk(4, " RECV:\n");
 
        /* Deal with i2c_scan */
        if (msg->len == 0) {
@@ -233,14 +224,12 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 
                msg->buf[i-1] = au0828_read(dev, REG_209) & 0xff;
 
-               if (i2c_debug)
-                       dprintk(1, " %02x\n", msg->buf[i-1]);
+               dprintk(4, " %02x\n", msg->buf[i-1]);
        }
        if (!i2c_wait_done(i2c_adap))
                return -EIO;
 
-       if (i2c_debug)
-               dprintk(1, "\n");
+       dprintk(4, "\n");
 
        return msg->len;
 }
@@ -250,10 +239,10 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap,
 {
        int i, retval = 0;
 
-       dprintk(1, "%s(num = %d)\n", __FUNCTION__, num);
+       dprintk(4, "%s(num = %d)\n", __FUNCTION__, num);
 
        for (i = 0 ; i < num; i++) {
-               dprintk(1, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
+               dprintk(4, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
                        __FUNCTION__, num, msgs[i].addr, msgs[i].len);
                if (msgs[i].flags & I2C_M_RD) {
                        /* read */
@@ -384,6 +373,7 @@ int au0828_i2c_register(struct au0828_dev *dev)
                        do_i2c_scan(DRIVER_NAME, &dev->i2c_client);
        } else
                printk("%s: i2c bus register FAILED\n", DRIVER_NAME);
+
        return dev->i2c_rc;
 }
 
@@ -393,10 +383,3 @@ int au0828_i2c_unregister(struct au0828_dev *dev)
        return 0;
 }
 
-/* ----------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */

diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 3dc09f8..9442677 100644 (file)
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -96,6 +96,9 @@ struct au0828_buff {
 /* au0828-core.c */
 extern u32 au0828_read(struct au0828_dev *dev, u16 reg);
 extern u32 au0828_write(struct au0828_dev *dev, u16 reg, u32 val);
+extern unsigned int debug;
+extern unsigned int usb_debug;
+extern unsigned int bridge_debug;
 
 /* ----------------------------------------------------------- */
 /* au0828-cards.c */
@@ -112,8 +115,14 @@ extern int au0828_i2c_register(struct au0828_dev *dev);
 extern int au0828_i2c_unregister(struct au0828_dev *dev);
 extern void au0828_call_i2c_clients(struct au0828_dev *dev,
        unsigned int cmd, void *arg);
+extern unsigned int i2c_debug;
 
 /* ----------------------------------------------------------- */
 /* au0828-dvb.c */
 extern int au0828_dvb_register(struct au0828_dev *dev);
 extern void au0828_dvb_unregister(struct au0828_dev *dev);
+
+#define dprintk(level, fmt, arg...)\
+       do { if (debug & level)\
+               printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\
+       } while (0)