--- /dev/null
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+#include <asm/fs_pd.h>
+
+#include <sysdev/fsl_soc.h>
+
+static void cpm2_dpinit(void);
+cpm_cpm2_t *cpmp; /* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t *cpm2_immr;
+
+#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
+ of space for CPM as it is larger
+ than on PQ2 */
+
+void
+cpm2_reset(void)
+{
+ cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+
+ /* Reclaim the DP memory for our use.
+ */
+ cpm2_dpinit();
+
+ /* Tell everyone where the comm processor resides.
+ */
+ cpmp = &cpm2_immr->im_cpm;
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK (get_brgfreq())
+#define BRG_UART_CLK (BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&cpm2_immr->im_brgc1;
+ } else {
+ bp = (uint *)&cpm2_immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+ volatile uint *bp;
+
+ if (brg < 4) {
+ bp = (uint *)&cpm2_immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&cpm2_immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+ if (div16)
+ *bp |= CPM_BRG_DIV16;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+
+static void cpm2_dpinit(void)
+{
+ spin_lock_init(&cpm_dpmem_lock);
+
+ /* initialize the info header */
+ rh_init(&cpm_dpmem_info, 1,
+ sizeof(cpm_boot_dpmem_rh_block) /
+ sizeof(cpm_boot_dpmem_rh_block[0]),
+ cpm_boot_dpmem_rh_block);
+
+ /* Attach the usable dpmem area */
+ /* XXX: This is actually crap. CPM_DATAONLY_BASE and
+ * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+ * varies with the processor and the microcode patches activated.
+ * But the following should be at least safe.
+ */
+ rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
+ CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+ rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+ return (void *)&cpm2_immr->im_dprambase[offset];
+}
+EXPORT_SYMBOL(cpm_dpram_addr);
--- /dev/null
+/*
+ * Platform information definitions.
+ *
+ * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates
+ * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek.
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * 1999-2001 (c) Dan Malek <dan@embeddedalley.com>
+ * 2006 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* The CPM2 internal interrupt controller. It is usually
+ * the only interrupt controller.
+ * There are two 32-bit registers (high/low) for up to 64
+ * possible interrupts.
+ *
+ * Now, the fun starts.....Interrupt Numbers DO NOT MAP
+ * in a simple arithmetic fashion to mask or pending registers.
+ * That is, interrupt 4 does not map to bit position 4.
+ * We create two tables, indexed by vector number, to indicate
+ * which register to use and which bit in the register to use.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+
+#include "cpm2_pic.h"
+
+static struct device_node *cpm2_pic_node;
+static struct irq_host *cpm2_pic_host;
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+
+static const u_char irq_to_siureg[] = {
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* bit numbers do not match the docs, these are precomputed so the bit for
+ * a given irq is (1 << irq_to_siubit[irq]) */
+static const u_char irq_to_siubit[] = {
+ 0, 15, 14, 13, 12, 11, 10, 9,
+ 8, 7, 6, 5, 4, 3, 2, 1,
+ 2, 1, 0, 14, 13, 12, 11, 10,
+ 9, 8, 7, 6, 5, 4, 3, 0,
+ 31, 30, 29, 28, 27, 26, 25, 24,
+ 23, 22, 21, 20, 19, 18, 17, 16,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static void cpm2_mask_irq(unsigned int irq_nr)
+{
+ int bit, word;
+ volatile uint *simr;
+
+ irq_nr -= CPM_IRQ_OFFSET;
+
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(cpm2_immr->im_intctl.ic_simrh);
+ ppc_cached_irq_mask[word] &= ~(1 << bit);
+ simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_unmask_irq(unsigned int irq_nr)
+{
+ int bit, word;
+ volatile uint *simr;
+
+ irq_nr -= CPM_IRQ_OFFSET;
+
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(cpm2_immr->im_intctl.ic_simrh);
+ ppc_cached_irq_mask[word] |= 1 << bit;
+ simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_mask_and_ack(unsigned int irq_nr)
+{
+ int bit, word;
+ volatile uint *simr, *sipnr;
+
+ irq_nr -= CPM_IRQ_OFFSET;
+
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(cpm2_immr->im_intctl.ic_simrh);
+ sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
+ ppc_cached_irq_mask[word] &= ~(1 << bit);
+ simr[word] = ppc_cached_irq_mask[word];
+ sipnr[word] = 1 << bit;
+}
+
+static void cpm2_end_irq(unsigned int irq_nr)
+{
+ int bit, word;
+ volatile uint *simr;
+
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && irq_desc[irq_nr].action) {
+
+ irq_nr -= CPM_IRQ_OFFSET;
+ bit = irq_to_siubit[irq_nr];
+ word = irq_to_siureg[irq_nr];
+
+ simr = &(cpm2_immr->im_intctl.ic_simrh);
+ ppc_cached_irq_mask[word] |= 1 << bit;
+ simr[word] = ppc_cached_irq_mask[word];
+ /*
+ * Work around large numbers of spurious IRQs on PowerPC 82xx
+ * systems.
+ */
+ mb();
+ }
+}
+
+static struct irq_chip cpm2_pic = {
+ .typename = " CPM2 SIU ",
+ .enable = cpm2_unmask_irq,
+ .disable = cpm2_mask_irq,
+ .unmask = cpm2_unmask_irq,
+ .mask_ack = cpm2_mask_and_ack,
+ .end = cpm2_end_irq,
+};
+
+int cpm2_get_irq(struct pt_regs *regs)
+{
+ int irq;
+ unsigned long bits;
+
+ /* For CPM2, read the SIVEC register and shift the bits down
+ * to get the irq number.*/
+ bits = cpm2_immr->im_intctl.ic_sivec;
+ irq = bits >> 26;
+
+ if (irq == 0)
+ return(-1);
+ return irq+CPM_IRQ_OFFSET;
+}
+
+static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+ return cpm2_pic_node == NULL || cpm2_pic_node == node;
+}
+
+static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
+
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
+ return 0;
+}
+
+static void cpm2_host_unmap(struct irq_host *h, unsigned int virq)
+{
+ /* Make sure irq is masked in hardware */
+ cpm2_mask_irq(virq);
+
+ /* remove chip and handler */
+ set_irq_chip_and_handler(virq, NULL, NULL);
+}
+
+static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+ static const unsigned char map_cpm2_senses[4] = {
+ IRQ_TYPE_LEVEL_LOW,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_EDGE_RISING,
+ };
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1 && intspec[1] < 4)
+ *out_flags = map_cpm2_senses[intspec[1]];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+
+ return 0;
+}
+
+static struct irq_host_ops cpm2_pic_host_ops = {
+ .match = cpm2_pic_host_match,
+ .map = cpm2_pic_host_map,
+ .unmap = cpm2_host_unmap,
+ .xlate = cpm2_pic_host_xlate,
+};
+
+void cpm2_pic_init(struct device_node *node)
+{
+ int i;
+
+ /* Clear the CPM IRQ controller, in case it has any bits set
+ * from the bootloader
+ */
+
+ /* Mask out everything */
+
+ cpm2_immr->im_intctl.ic_simrh = 0x00000000;
+ cpm2_immr->im_intctl.ic_simrl = 0x00000000;
+
+ wmb();
+
+ /* Ack everything */
+ cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
+ cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
+ wmb();
+
+ /* Dummy read of the vector */
+ i = cpm2_immr->im_intctl.ic_sivec;
+ rmb();
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ cpm2_immr->im_intctl.ic_sicr = 0;
+ cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
+ cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
+
+ /* create a legacy host */
+ if (node)
+ cpm2_pic_node = of_node_get(node);
+
+ cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64);
+ if (cpm2_pic_host == NULL) {
+ printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
+ return;
+ }
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff